Audio Technica

With three cardioid condenser elements in a single housing, the phantom-powered U843R offers a remarkably versatile tool for surface-mount installations. It is ideal for a variety of video and audio conferencing applications, especially when used with an Audio-Technica automatic SmartMixer®. Levers on the microphone base allow easy reorientation of two elements to offer 360° or 300° coverage. Since elements can be powered and used individually or in any combination, further flexibility is easily achieved. For example, with two elements powered, the microphone can provide a figure-of-eight polar pattern; with a single element powered, the microphone functions as a standard cardioid boundary microphone. Installation and repositioning are extremely quick, thanks to four recessed pathways on the base of the microphone that enable the user to route the cable as required to accommodate any installation requirements; no tools or disassembly are needed. The microphone also offers Audio-Technica’s innovative UniGuard® RFI-shielding technology.MicrophonesElement: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Cardioid x 3Frequency Response: 75-15,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa

Ευρυζωνικό antenna booster. για τις σειρές EM3731/3732 και EM2000/2050

Ανταλλακτική βελόνα για την κεφαλή AT-XP5. Αναβάθμιση για την κεφαλή AT-XP3. Συμβατή με τις κεφαλές ΑΤ-ΧΡ3 και AT-XP7. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Handmade in Japan.

Designed for streamers and content creators, the ATH-M50xSTS StreamSet™ is the world’s first professional streaming headset that combines the legendary studio sound of the ATH-M50x headphones with the clarity of the iconic 20 Series microphones. Equipped with a cardioid condenser microphone, and two distinct earpad styles that you can use according to your preference, this headset delivers the ultimate studio-quality sound for you and your streaming audience.Designed from the critically acclaimed ATH-M50x, the ATH-M50xSTS StreamSet is equipped with the same 45 mm large-aperture drivers with the addition of two sets of distinct interchangeable earpads– M50x earpads that stress audio quality and sound isolation and mesh and leatherette to emphasize breathability and comfort. Experience studio-quality articulation and intelligibility thanks to the StreamSet’s cardioid condenser microphone, adopted from the iconic 20 Series studio mics. The microphone’s design places it at the end of a flexible boom arm, keeping the mic in close proximity to your mouth, helping to reject background noise and deliver crystal-clear audio. The microphone can be easily muted quickly and efficiently simply by flipping the boom arm into the up position.The StreamSet is available in two configurations. The ATH-M50xSTS is outfitted with a 2 m (6.6') permanently attached cable with 3.5 mm (1/8") headphone input and XLR microphone output for connection to an audio interface or mixer. A 6.3 mm (1/4") snap-on adapter is also included for the headphone plug. For those looking for plug-and-play connectivity to PCs and Macs, the ATH-M50xSTS-USB is outfitted with a 2 m (6.6') permanently attached cable with USB-A connection.

Ειδικό κιτ καθαρισμού δίσκων βινυλίου. Περιλαμβάνει καινοτόμο καθαριστικό υγρό (formula Audio-Technica) και κοίλο βουρτσάκι για την τοποθέτηση του, επιτυγχάνοντας υγρό καθαρισμό των δίσκων βινυλίου.

Ear Pad Για Audio-Technica ATH-M40x σε Χρώμα Μαύρο. Η τιμή αφορά τεμάχιο.

DescriptionThe AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

DescriptionThe AT-XP3 cartridge is specially designed for DJs. It features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body, has a tracking force of 2 to 4 grams, and offers a powerful output level of 5.5 mV. Its 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. And the cartridge design provides maximum visibility of the stylus tip. The AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

DescriptionThe AT-XP7 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 6.0 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

ΠεριγραφήTo νέο επαγγελματικό πικάπ AT-LP140XP της Audio-Technica έχει σχεδιαστεί για να παρέχει εξαιρετική ποιότητα ήχου και αξιοπιστία. To μοτέρ υψηλής ροπής εξασφαλίζει γρήγορη εκκίνηση και καταπληκτική σταθερότητα ταχύτητας για αναπαραγωγή 33-1/3, 45 αλλά και 78 στροφών το λεπτό. Είναι εξοπλισμένο με βραχίονα σχήματος S με ρύθμιση ύψους (κατακόρυφη ανίχνευση), ρύθμιση αντιολίσθησης και παρέχεται με νέα κεφαλή DJ υψηλής απόδοσης AT-XP3. Το πλατό αλουμινίου με χυτοπρεσαριστό υλικό και το υβριδικό χαλύβδινο / πολυμερές deck αντι-συντονισμού συμβάλλουν περαιτέρω στη απόδοση του πικάπ. Διαθέσιμο σε ασημί και μαύρο χρώμα, το AT-LP140XP προσφέρει ότι χρειάζεται ένας Dj, όπως μπουτόν έναρξης-διακοπής, αναπαραγωγή εμπρός-πίσω, επιλογή αλλαγής βήματος, με φως παρακολούθησης της βελόνας και πολλά άλλα.

ΠεριγραφήTo νέο επαγγελματικό πικάπ AT-LP140XP της Audio-Technica έχει σχεδιαστεί για να παρέχει εξαιρετική ποιότητα ήχου και αξιοπιστία. To μοτέρ υψηλής ροπής εξασφαλίζει γρήγορη εκκίνηση και καταπληκτική σταθερότητα ταχύτητας για αναπαραγωγή 33-1/3, 45 αλλά και 78 στροφών το λεπτό. Είναι εξοπλισμένο με βραχίονα σχήματος S με ρύθμιση ύψους (κατακόρυφη ανίχνευση), ρύθμιση αντιολίσθησης και παρέχεται με νέα κεφαλή DJ υψηλής απόδοσης AT-XP3. Το πλατό αλουμινίου με χυτοπρεσαριστό υλικό και το υβριδικό χαλύβδινο / πολυμερές deck αντι-συντονισμού συμβάλλουν περαιτέρω στη απόδοση του πικάπ. Διαθέσιμο σε ασημί και μαύρο χρώμα, το AT-LP140XP προσφέρει ότι χρειάζεται ένας Dj, όπως μπουτόν έναρξης-διακοπής, αναπαραγωγή εμπρός-πίσω, επιλογή αλλαγής βήματος, με φως παρακολούθησης της βελόνας και πολλά άλλα.

ΠεριγραφήΑυτό το πλήρως χειροκίνητο πικάπ έχει σχεδιαστεί σύμφωνα με το AT-LP120XUSB, αλλά προσθέτει την άνεση της ασύρματης συνδεσιμότητας Bluetooth στις υπάρχουσες αναλογικές και USB εξόδους.Crystal Clear Bluetooth Wireless AudioΣυμβατό με τα περισσότερα ηχεία και ακουστικά Bluetooth, το LP120XBT-USB συνδέεται άψογα με τις συσκευές σας. Απλώς πατήστε το κουμπί Bluetooth, που βρίσκεται δίπλα στον τονικό βραχίονα, για 4 δευτερόλεπτα και συνδεθείτε στα ηχεία που έχετε επιλέξει, είναι τόσο απλό. Μπορείτε επίσης να συνδεθείτε με ασύρματα ακουστικά Bluetooth, δίνοντας σας την ευελιξία να απολαμβάνετε τους δίσκους βινυλίου σας χωρίς την ακαταστασία των καλωδίων ή να χρειάζεται να βρίσκεστε κοντά στο πικάπ και τη μουσική ρύθμιση. Βυθιστείτε στην πιο άνετη καρέκλα σας και απολαύστε ασύρματα πάνω από μισό αιώνα ιαπωνικής μηχανικής ήχου και υπεροχής ήχου.Plug and PlayΤο LP120XBT-USB έχει σχεδιαστεί για να σας προσφέρει μια εμπειρία ακρόασης υψηλής ποιότητας που είναι εύκολο να απολαύσετε αμέσως. Ένας ενσωματωμένος προενισχυτής σημαίνει ότι το LP120XBT-USB μπορεί να συνδεθεί απευθείας στα υπάρχοντα ηχεία σας ή, με το απλό πάτημα ενός διακόπτη, να συνδεθεί ασύρματα μέσω Bluetooth 5.0 σε οποιοδήποτε ηχείο συμβατό με bluetooth, υποστηριζόμενο βοηθό σπιτιού ή ασύρματα ακουστικά. Εξοικονόμηση χώρου χωρίς εξωτερικούς ενισχυτές, χωρίς ακαταστασία και χωρίς χάος. απλά απίστευτος ήχος και αξιόπιστα χαρακτηριστικά σχεδιασμένα με πάνω από μισό αιώνα ιαπωνικής καινοτομίας ήχου.

ATW-R3210 receiver and ATW-T3201 body-pack transmitter with BP892xcH MicroSet omnidirectional condenser headworn microphone. Includes element covers, windscreens, clothing clip, and dual-ear adapter kit.

ATW-R3210 receiver and ATW-T3201 body-pack transmitter with AT831cH cardioid condenser lavalier microphone.  

AT5045P Cardioid Condenser Instrument Microphone Pair. Studio Instrument Microphones The AT5045P is two of Audio-Technica’s premier condenser instrument microphones in a stereo pair pack. Offering the performance of a large-diaphragm, side-address condenser in a convenient, stick-type body, the AT5045, despite the space limitations imposed by its housing,boasts Audio-Technica’s largest single diaphragm. The instrument microphone’s circuitry has been honed to the essentials, allowing the AT5045 to achieve an unprecedented dynamic range that’s one of the widest of any microphone on the market. 100% quality control Every AT5045 is hand assembled and individually inspected for 100% quality control. Each microphone is enclosed in an elegant housing of aluminum and brass with a high-quality gray finish for durability and low reflectivity. Discrete components have been selected for optimized performance. The circuitry and capsule assembly are mounted as a single block within a floating internal shock mount, effectively decoupling the capsule from the microphone body for excellent vibration isolation. In fact, every aspect of the microphone has been carefully considered to minimize any negative effects on the audio signal. The AT5045P stereo pair pack comes with two AT5045 instrument mics, two of Audio-Technica’s innovative AT8481 isolation clamps, two AT8165 windscreens and a protective carrying case that holds a both AT5045 microphones. Available as a single microphone (AT5045) or as a stereo pair (AT5045P).

AT5045 Premier Studio Condenser Instrument Microphone Premier Studio Condenser Instrument Microphone A large diaphragm in a small body Available as a single mic or a stereo pair, the AT5045 offers the sound and performace of a large diagphram studio condenser microphone, in a small and easy to position stick type body. Despite its small size, the AT5045 has Audio-Technica's largest single diaphragm, larger than most large diaphragm condenser microphones on the market. Audio-Technica’s premium studio condenser instrument microphone Larger diaphragm surface area than most traditional large diaphragm condenser microphones on the market Stick design for easy and precise microphone positioning Pure and realistic sound quality; ideal for piano, overheads and acoustic instruments Discrete components carefully selected for optimized capsule performance High-SPL capability and extended frequency response Hand assembled and inspected for 100% quality control Elegant, durable housing of aluminum and brass “Easy and precise microphone positioning” The AT5045 is presented in a convenient stick design body, meaning you can easily position it in places that are not possible with other large diaphragm condenser microphones, making it a very versatile microphone. “Audio-Technica’s largest single element” The AT5045 uses Audio-Technica's largest single element, larger than that of most on the market, offering a pure and accurate sound reproduction that is perfectly suited to acoustic instruments. “Optimized capsule performance” Discrete components have been chosen to complete the circuitry, honing down to the very essentials, allowing optimized capsule performance and an unpresidented dynamic range. Innovative design The AT45045 offers a diaphragm larger than most on the market, but in a convenient, easy to position stick type body, made from durable aluminium and brass.  Large rectangular diaphragm The AT5045 has Audio-Technica's largest single diaphragm, offering imporoved transient response and increased bandwidth AT8482 Shock Mount An advanced-design custom shock mount provides superior isolation attenuating noise, shock and vibration Custom hard-shell carry case Custom hard-shell carry case with die cut foam compartments offers protection for one or two microphones

BP4073, πυκνωτικό μικρόφωνο shotgun από την Audio-Technica. Σχεδιασμένο για broadcasting, παραγωγή ταινιών και θέατρο, έχει στενό πολικό διάγραμμα με κατευθυντικότητα αντίστοιχη μικροφώνων που είναι 50% μακρύτερα. Διαθέτει διακόπτες 80Hz highpass & 10dB pad.

BP4071L, πυκνωτικό μικρόφωνο shotgun από την Audio-Technica. Είναι ιδανικό για broadcasting, παραγωγή ταινιών και θέατρο, έχει εξαιρετικά στενό κατευθυντικό πολικό διάγραμμα, σχεδίαση χωρίς μετασχηματιστή, διακόπτες 80Hz highpass & 10dB pad.

BP4071, πυκνωτικό μικρόφωνο shotgun από την Audio-Technica. Έχει πρωτοποριακή σχεδίαση που του δίνει την ίδια κατευθυντικότητα με μικρόφωνα 50% μακρύτερα. Διαθέτει χαμηλό επίπεδο θορύβου, υψηλή ευαισθησία και διακόπτες 80Hz highpass & 10dB pad.

MB3K δυναμικό μικρόφωνο για φωνητικά από την Audio-Technica. Διαθέτει καρδιοειδές πολικό διάγραμμα, high energy δυναμική κάψα νεοδυμίου, αντκραδασμική ανάρτηση που μειώνει το θόρυβο χειρισμού, 60-14000Hz, 600Ω, διαθέτει βύσμα ενιαίο επιχρυσωμένο 3-pin τύπου XLRM.

Based on models originally developed for use in the broadcast of the Sydney Games in 2000, the BP4027 (14.96" long) and BP4029 (9.29" long) Stereo Shotgun models are engineered for high-end broadcast and production use. Both microphones feature independent line-cardioid and figure-of-eight elements configured in an MS (Mid-Side) arrangement with switch-selectable internal matrixing. These innovative microphones allow sound recordists the choice of selecting a left-right stereo output (wide or narrow) via the microphone’s internal matrixing system or choosing discrete Mid-Side signals for later manipulation, a flexibility not available from any other manufacturer. A switchable low frequency roll-off filter helps minimize the pickup of unwanted low frequency noise. These phantom-powered models feature a rugged lightweight design and sleek black color scheme, perfect for on-camera use. Designed for broadcasters, videographers and sound recordists Compact, lightweight design is perfect for camera-mount use Independent Line-cardioid and Figure-of-eight condenser elements Switchable low-frequency roll-off Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes Includes a 0.61 m (24") cable (5-pin XLRF to two standard 3-pin XLRM connectors) RoHS compliant—free from all substances specified in the EU directive on hazardous substances

MB1K δυναμικό μικρόφωνο κατάλληλο για φωνητικά από την Audio- Technica. Διαθέτει δυναμική κάψα νεοδυμίου, μονοκατευθυντικό πολικό διάγραμμα, διακόπτη MagnaLock on/off, 80-12000Hz, 600Ω, 3-pin ενιαίο βύσμα επιχρυσωμένο τύπου XLRM, 337gr.

Το AudioTechnica AT-607a είναι ένα καθαριστικό κιτ βελόνας , κεφαλών πικάπ , υγρού καθαρισμού. Στην συσκευασία περιλαμβάνεται υγρό και κατάλληλο βουρτσακι. 

Audio-Technica combines exceptionally low-noise large-diaphragm condenser elements with a shotgun design for extremely tight polar patterns, perfect for long-range sound recordings. With a length of 56.8 cm, the directional BP28L shotgun microphones have been specially designed to meet the needs of broadcast, film, television, recording outdoors and theater applications. Particularly suitable for long-distance sound recording in filmmaking or in theatre, the BP28L have a very low noise level (3 dB), and a transformer-coupled output results in a smooth sonic character. The microphone provide extremely high sensitivity (-23 dBV), wide dynamic range (135 dB) and high-SPL capability (138 dB). The patented acoustic port design maintains directionality across the entire frequency range. Large-diaphragm condenser element and optimized circuitry deliver exceptional low-noise performance – ideal for film/TV production and broadcasting applications Overall length of 567.9 mm with an extremely narrow, highly directional pickup pattern Transformer-coupled output provides smooth sonic character Extremely high sensitivity (-23 dBV), wide dynamic range (135 dB), and high-SPL capability (138 dB) Flat frequency response for accurate sound reproduction Rugged housing made of lightweight, structural-grade aluminum alloy Switchable 80 Hz high-pass filter and 10 dB pad Patented acoustic port design maintains directionality across the entire frequency range

Audio-Technica combines exceptionally low-noise large-diaphragm condenser elements with a shotgun design for extremely tight polar patterns, perfect for long-range sound recordings. With a length of 35.5 cm, the directional BP28 shotgun microphones have been specially designed to meet the needs of broadcast, film, television, recording outdoors and theater applications. Particularly suitable for long-distance sound recording in filmmaking or in theatre, the BP28 have a very low noise level (8 dB), and a transformer-coupled output results in a smooth sonic character. The microphone provide extremely high sensitivity (-28 dBV), wide dynamic range (135 dB) and high-SPL capability (143 dB). The patented acoustic port design maintains directionality across the entire frequency range. Large-diaphragm condenser element and optimized circuitry deliver exceptional low-noise performance – ideal for film/TV production and broadcasting applications Overall length of 354.9 mm with a highly directional pickup pattern Transformer-coupled output provides smooth sonic character Extremely high sensitivity (-28 dBV), wide dynamic range (135 dB), and high-SPL capability (143 dB) Flat frequency response for accurate sound reproduction Rugged housing made of lightweight, structural-grade aluminum alloy Switchable 80 Hz high-pass filter and 10 dB pad Patented acoustic port design maintains directionality across the entire frequency range

Line + Gradient Condenser Microphone, 369mm The length (369mm) of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power. Very precise sound recording, even in noisy environments The AT8035 is ideal for videos and movies but should be installed outside of the image, in other words, out of camera range. This type of microphone, provided with an interference tube in front of the capsule, which cancels a large part of its off-axis.Audio-Technica's Line and Gradient Condenser Microphones combine a directional capsule ("gradient") and an interference tube which removes the sound from the rear. Generally, the interference tube of this type of microphone can be extended to reduce the acceptance angle and thus increase the sound capture distance. Short condenser microphones do not have as long a range as shotgun models, but in some cases are preferred for their greater acceptance angle, when the accuracy of the source is less important. 369mm Shotgun Microphone, designed for video production and broadcast (ENG/EFP) audio acquisition Provides the narrow acceptance angle desirable for long-distance sound pickup Captures sound with high intelligibility in noisy environments with its excellent sound rejection from the sides and rear of mic Two power modes (battery or phantom power) for versatility 80Hz low-frequency roll-off, with a slope of 18dB / octave to reduce pickup of low-frequency ambient noise Effective protection against interference from nearby mobile phones and other unwanted radio frequencies Equipped with a foam windscreen, the AT8035 comes with a 1.5V AA battery, a stand clamp and a carry case “Low-cut filter” The low-cut position reduces sensitivity to ambient low frequency noise such as traffic noise, ventilation, reverberation of the room or mechanical vibrations transmitted through the recording device. “two powering options” The AT8035 shotgun microphone can be powered in two ways allowing for maximum versatility. You can use it on a professional camera or recorder equipped with XLR inputs with phantom power, or by using a 1.5V AA battery (included) on any device equipped with XLR inputs. “high intelligibility” Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. The AT8035 guarantees you a very specific audio capture with high intelligibility. Battery / phantom power Two power modes (battery or 48V phantom power) for increased versatility. Low-cut FILTeR Switchable low-cut filter for better isolation of unwanted noise. Line + gradient The AT8035 combines a directional capsule ("gradient") and an interference tube which removes the sound from the rear. Accessories Comes with a stand clamp, a foam windscreen, a 1.5V AA battery, two O-rings and a carrying case.

Very accurate sound capture, even in noisy environments Designed for video production and broadcast (ENG/EFP) audio acquisition, the AT8015 provides the narrow acceptance angle desirable for long-distance sound pickup, along with excellent sound rejection from the sides and rear of mic. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations. Generally, the tube interference of this type of microphone can be extended to reduce the acceptance angle and thus increase the sound capture distance. Shorter condenser microphones do not have as long-a range as long as the shotgun models, but are favoured for their greater acceptance angle in some cases, when the accuracy of the source is less important. Long 460mm shotgun microphone, designed for video production and broadcast (ENG/EFP) audio acquisition Provides the narrow acceptance angle desirable for long-distance sound pickup Captures sound with high intelligibility in noisy environments due to excellent sound rejection from the sides and rear of mic Operates on battery or phantom power for increased versatility Switchable 80Hz low frequency rolloff, with a slope of 18dB / octave to reduce pickup of low-frequency ambient noise Effective protection against interference related to nearby mobile phones and other unwanted radio frequency Comes with a windscreen, a 1.5V AA battery, a stand clamp and a carry case “low-cut filter” The low-cut position reduces the sensitivity to ambient low frequency noise such as traffic noise, ventilation, reverberation of the room or mechanical vibrations transmitted through the recording device. “two types of power supply ” The AT8015 shotgun microphone can be powered in two ways for reaching maximum versatility. You can use it on a professional camera or recorder equipped with XLR inputs with phantom power, or by using a 1.5V AA battery (included) on any device equipped with XLR inputs. “high intelligibility” Its very narrow directivity provides the narrow acceptance angle needed for long-distance sound pickup while maintaining excellent rejection of off-axis noise. The AT8015 guarantees you very specific audio capture with high intelligibility. battery or 48V phantom power Two power modes to choose from (battery or phantom power) for increased versatility. low-cut FILTeR Switchable low-cut filter for better insulation of unwanted mechanical / background noise. Line + gradient The AT8015 combines the narrow acceptance angle desirable for long-distance sound pickup, with excellent sound rejection from the sides and rear of mic. Accessories Comes with a stand clamp, a foam windscreen, a 1.5V AA battery, two O-rings and a carrying case.

Cardioid Condenser Handheld Microphone With pristine audio quality, ultra-low handling noise, and high-frequency clarity, Audio-Technica's AE3300 gives voice to the subtleties of vocal performance. The quality of the famous At4033 in a stage mic With pristine audio quality, ultra-low handling noise, and high-frequency clarity, Audio-Technica's AE3300 gives voice to the subtleties of vocal performance. This cardioid condenser vocal microphone features the condenser element used in the legendary AT4033 and proven in the world's finest recording studios. The hardened-steel outer grille is lined with fine steel mesh and a layer of open-cell foam for ultimate protection against vocal plosives without compromising high-frequency clarity. Its superior anti-shock engineering ensures low handling noise and quiet performance. For exceptional performance. For exacting detail. For brilliant clarity: AE3300. it's the new standard in live audio. Exceptional performance for exceptional performers Same element as the classic AT4033 studio microphone Well-tempered polar pattern with outstanding rejection qualities Superior anti-shock engineering ensures low handling noise and quiet performance Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity Robust all-metal design for enduring dependability on the road Integral 80 Hz HPF switch and 10 dB pad Designed and made in Japan, guaranteed for 15 years “Same element as the AT4033” The AE3300 is built with the element of the legendary AT4033 studio microphone. As such, it delivers the same clarity and realism without coloration. Moreover, its very well balanced cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source and& ensuring a high quality rejection. “Multi-stage grille” The grille of the AE3300 is composed of 3 structures: a polyurethane foam layer which guarantees perfect thermal insulation, a hardened steel outer grille, covered with a fine metal mesh. “sound consistency in all situations” Whether you're recording in the studio with your AT4033aSM or performing on stage with the AE3300 or the wireless T3300a AEW-wire system version connected to a 4000 or 5000 Series, you will always find the same sound homogeneity, whatever the situation. Low cut filter and attenuator The AE3300 is equipped with a low-cut filter that removes frequencies below 80 Hz with a gradient of 12dB / octave. Low frequencies are controlled in a very natural way. 3 layer grille The protective head that protects the element is made from a polyurethane foam layer, a hardened steel grille, and covered with a fine metal mesh. Robust and very effective against pops and sibilance. Isolating stand clamp Quiet-Flex® AT8470 stand clamp (included) provides silent, flexible microphone positioning and facilitates the positioning of the AE3300 on any microphone stand. Protective pouch The AE3300 comes with a soft protective pouch for easy storage and transport.

Omnidirectional Condenser Lavalier Microphone, Jack 3.5mm Audio-Technica’s newscaster-style omnidirectional ATR3350 lavalier is engineered for intelligible, accurate voice reproduction. Audio-Technica’s newscaster-style omnidirectional ATR3350 lavalier is engineered for intelligible, accurate voice reproduction. This high-quality condenser is ideal for video use, and is a favorite choice for aerobics/dance/sports instructors. Its low-profile design assures minimum visibility. Newscaster-style miniature mic is perfect for video use Ideal for aerobics/dance/sports instructors Integrated 6 m cable with 3.5 mm mini-plug for use with most cameras Omni pickup pattern offers full coverage Includes tie clip, battery, foam windscreen

BPHS2C Broadcast Stereo Headset with Condenser mic. XLR + 6.3mm Created especially for news and sports broadcasting, this rugged stereo headset offers clear, articulate vocal reproduction, along with a comfortable fit and excellent sound isolation. Its low-profile, closed-back, on-ear design is based on the ATH-M60x professional monitor headphones and includes the same 45 mm large-aperture drivers, and premium, memory foam earpads and headband, giving users a high-fidelity headset that’s built to last. The headset’s sleek cardioid condenser microphone keeps the pickup focused on the broadcaster’s voice, even in loud environments, and is tailored to reproduce that voice with a clear, articulate quality. The microphone sits at the end of a rigid boom with a strong, flexible gooseneck section that allows the microphone to be easily adjusted and then stay in place. The boom is also designed to swivel forward and back so that the headset can be worn with the mic positioned on either the right or left side. Headset comes with a 3.0 m detachable cable (BPCB2) with a TA6F connector at the headset and, at the output end, a 3-pin XLRM-type connector for the microphone and a 6.3 mm (1/4") connector for the headphones. An unterminated version of the cable (BPCB3) is available separately. Headset is also available with a dynamic microphone (BPHS2) and as a single-ear headset (BPHS2S). Low-profile, closed-back, on-ear design provides excellent isolation and fit Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils Sleek cardioid condenser microphone with frequency response tailored for clear, articulate vocal reproduction Carefully crafted using key metal components for lasting durability Low-impedance design delivers high output level from any headphone output Boom-mounted microphone can be positioned on the left or right side Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end Earpads and headband detach for easy replacement 3.0 m detachable cable (BPCB2) with TA6F connector at headset, and 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") connector (headphone) outputs  Unterminated detachable cable (BPCB3) is available separately  Headset is also available with a dynamic microphone (BPHS2) and as a single-ear headset (BPHS2S)

BPHS2 Broadcast Stereo Headset with Dynamic mic. XLR + 6.3mm Created especially for news and sports broadcasting, this rugged stereo headset offers highly intelligible and commanding vocal reproduction, along with a comfortable fit and excellent sound isolation. Its low-profile, closed-back, on-ear design is based on the ATH-M60x professional monitor headphones and includes the same 45 mm large-aperture drivers, and premium, memory foam earpads and headband, giving users a high-fidelity headset that’s built to last. The headset’s hypercardioid dynamic microphone keeps the pickup focused on the broadcaster’s voice, even in loud environments, and is tailored to reproduce that voice with a rich, broadcast-ready sound. The microphone sits at the end of a rigid boom with a strong, flexible gooseneck section that allows the microphone to be easily adjusted and then stay in place. The boom is also designed to swivel forward and back so that the headset can be worn with the mic positioned on either the right or left side. The headset comes with a 3.0 m detachable cable (BPCB2) with a TA6F connector at the headset and, at the output end, a 3-pin XLRM-type connector for the microphone and a 6.3 mm (1/4") connector for the headphones. An unterminated version of the cable (BPCB3) is available separately. This headset is also available with a condenser microphone (BPHS2C) and as a single-ear headset (BPHS2S). Low-profile, closed-back, on-ear design provides excellent isolation and fit Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils Hypercardioid dynamic microphone with frequency response tailored for commanding, broadcast-ready vocal reproduction Carefully crafted using key metal components for lasting durability Low-impedance design delivers high output level from any headphone output Boom-mounted microphone can be positioned on the left or right side Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end Earpads and headband detach for easy replacement 3.0 m detachable cable (BPCB2) with TA6F connector at headset, and 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") connector (headphone) outputs Unterminated detachable cable (BPCB3) is available separately Headset is also available with a condenser microphone (BPHS2C) and as a single-ear headset (BPHS2S)

BPHS1 Broadcast Stereo Headset with Boom Microphone Created especially for on-air news & sports broadcasting, announcing & interviews, this rugged stereo headset offers natural, highly intelligible and focused vocal reproduction, closed-back circumaural (around-the-ear) ear cups to seal out background noise, and a high-output dynamic microphone mounted on a flexible gooseneck boom. The headset s microphone has a cardioid polar pattern tailored for pickup of speech with maximum voice intelligibility over a wide range of frequencies. It is more sensitive to sound originating directly in front of the element, making it useful in reducing pickup of unwanted sounds. The flexible gooseneck boom swivels for easy positioning on either the right or left side. Microphone features polar pattern and frequency response tailored for natural, highly intelligible vocal reproduction Closed-back circumaural ear cups help seal out crowd noise and other background distractions Neodymium magnets in microphone and headphones for high output level & detailed sound reproduction Cardioid pickup pattern of the dynamic microphone rejects off-axis sounds Boom-mounted microphone can be positioned on the left or right side Adjustable cushioned headband and lightweight design for long-wearing comfort Rugged design with user-replaceable cable and ear pads BPHS1 - Includes detachable cable (BPCB1) that terminates in 3-pin XLRM-type connector for microphone and ¼" 3-conductor for headphone BPHS1-XF4 - Includes detachable cable (BPCB4) terminates in 4-pin XLRF-type connector for use with intercom systems

Open-back dynamic headphones Open-back headphones ATH-AVA400 with self-adjusting headband support mechanism - suitable for hours of use with home audio and video systems. Offers full, high-quality sound. Open-air design, featuring 40mm CCAW drivers, delivers rich, detailed sound Honeycomb-punched aluminium housings enable clear sound reproduction Self-adjusting headband support provides comfortable fit even during extended wear Soft, cloth earpads reduce pressure on your ears

Closed-back dynamic headphonesEntry-level closed-back headphones with comfortable fit for use with home audio and video systems. Offers high-quality sound for enhanced enjoyment of movies and music. Newly designed 40 mm drivers reproduce clear mid-low frequencies Adjustable headband support provides comfortable fit even during extended wear Large headband delivers comfortable and stable fit Contoured earpads fit naturally over ears to help to provide rich bass

ATH-PRO7X DJ Headphones - On-ear style with pivoting ear cups provide great sound isolation, Extensive frequency response from 5 to 40.000 Hz and Premium, soft earpads provide hours of wearing comfort. The ATH-PRO7X professional DJ headphones combine the comfort and low-profile style of an on-ear design with powerful 45 mm drivers capable of handling 2,000 mW of input power. This combination gives DJs extremely accurate high-fidelity audio reproduction – even at loud volumes – from a pair of headphones that are easy to wear through even the longest gigs. The ATH-PRO7X headphones come with two interchangeable cables – a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable – that lock in place to ensure a secure connection during active DJ use. The headphones are lightweight, but built to hold up under rough use. And the soft durable earpads and headband are designed to provide hours of listening comfort. Proprietary 45mm large-aperture drivers produce ultra-expressive powerful sound Maximum input power of 2,000mW enables operation at higher volume levels needed for professional use Extensive frequency response from 5 to 40.000 Hz On-ear style with pivoting earcups provide great sound isolation and easy positioning Sleek and elegant design to minimize weight Premium, soft durable earpads provide hours of wearing comfort Detachable cable with lock ensures secure connection during active DJ use Easy replaceable headband cushion and earpads  

Designed for studio, broadcast and mobile applications, the ATH-M60x on-ear professional monitor headphones utilize the same proprietary 45 mm large-aperture drivers found in the legendary ATH-M50x headphones, delivering exceptional clarity throughout an extended frequency range with accurate bass response.  The low-profile, closed-back, on-ear design provides excellent sound isolation and a great fit, which is enhanced by the exceptional comfort and durability of the memory foam earpads and headband. The headphones come with three interchangeable cables (1.2 m - 3.0 m coiled, 3.0 m straight, and 1.2 m straight – each with a 3.5 mm (1/8") mini-plug), a 6.3 mm (1/4") screw-on adapter, and a protective carrying pouch. Built on the Acclaimed M50x Sound These headphones use the same drivers as the ATH-M50x to deliver exceptional clarity throughout an extended frequency range with deep, accurate bass response. Award-Winning On-Ear Headphones Praised for their technical excellence, the M60x on-ear headphones offer a low-profile option for fans of the Audio-Technica M-Series. Built to Last You won’t have to worry about durability – these headphones are built to last with key metal components ensuring long-term performance. Low-profile, closed-back, on-ear design provides excellent isolation and fit Proprietary 45 mm large-aperture drivers (the same used in the legendary ATH-M50x) with rare earth magnets and copper-clad aluminum wire voice coils Carefully crafted using key metal components for lasting durability Exceptional clarity throughout an extended frequency range with accurate bass response Low-impedance design delivers high output level from any headphone output Premium, memory foam earpads and headband allow headphones to be worn comfortably for hours on end Earpads and headband detach for easy replacement Ideal for studio, broadcast and mobile applications Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable)

Shell κεφαλής,μαύρο. Κατασκευασμένο από χυτό αλουμίνιο υψηλών προδιαγραφών. Συμβατό με βραχίονες Audio-Technica, Technics, SME. Συμπεριλαμβάνονται καλώδια σύνδεσης κεφαλής. Συμπεριλαμβάνονται οι βίδες με τα παρελκόμενα για τη στήριξη της κεφαλής. Δυνατότητα ρύθμισης της υπερκρέμασης κεφαλής. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου.

The LH-10000 is an exceptionally high quality headshell made using a high performance Aluminum alloy with Zinc as the primary alloying element. The Aluminum alloy used for LH-10000 is strong, with strength comparable to steel. It has good fatigue strength and machinability, but offers more resistance to corrosion than many other Aluminum alloys. LH-10000 features a precision machined slit on the top plate. A piece of Ortofon's special proprietary TPE (Thermo-Plastic Elastomer) compound with excellent damping properties is integrated into the slit. LH-10000 incorporates damping technology similar to the Ortofon TA-110 / TA-210 tonearms and the Xpression cartridge, promoting a further reduction in unwanted resonances. LH-10000 is fitted with the set of the most sophisticated lead wires identical to Ortofon LW-800S, composed of pure silver and silver coated wire. Silver coated wire transmits the very clear high tone signals, which brings the brilliant tonality. LH-10000 is perfect for a variety of High-end cartridges, including the MC Anna, MC Anna Diamond, MC A95, MC Windfeld Ti, Cadenza Series, e.g. Cadenza Bronze as well as the historical MC A90, MC Windfeld, MC Century, Kontrapunkt series and MC Jubilee. LH-10000 is azimuth adjustable, which is beneficial for optimal channel separation.

Shell κεφαλής DJ Style,αλουμινίου από χυτοπρεσσαριστό σώμα.Συμβατό με βραχίονες Audio-Technica,Technics, SME. Το AT-HS6 είναι ένα universal ½ "-mount headshell για 4-pin κεφαλές πικάπ. Είναι από εξαιρετικά ελαφρύ (9 g) αλουμίνιο χυτό σώμα για να διατηρεί τους κραδασμούς στο ελάχιστο και ένα δάχτυλου lift για να επιτρέπει την ακριβή τοποθέτηση κεφαλής στο δίσκο. Το κέλυφος έρχεται με καλώδια και βίδες στήριξης.

Shell κεφαλής DJ StyleΒάρος: 10gr Συμβατό με βραχίονες Audio-Technica, Technics, SME Συμπεριλαμβάνονται καλώδια σύνδεσης κεφαλής. Συμπεριλαμβάνονται οι βίδες με τα παρελκόμενα για τη στήριξη της κεφαλής. Δυνατότητα ρύθμισης της υπερκρέμασης κεφαλής.

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM670SP Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου.

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM760SLC Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM750SH.

Χειροποίητη ανταλλακτική βελόνα για τις κεφαλές VM740ML και VM540ML. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM530ENΤο προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan