Grado

Grado Timbre Platinum 3 H

Platinum BlondeThe first step-up from the Opus3, the Platinum3 puts Jarrah wood and a twin magnet system to work for your favorite music.Hear MoreThe Platinum3 is a great example of what the Timbre Series is made for: to start listening to your music with more clarity and depth than you’ve heard before. The MaterialsTo make the Timbre Series work as a whole, we created a way for Jarrah, diamonds, and a twin magnet system to integrate with our Flux-Bridge™. We modified our four piece OTL cantilever technology to achieve a 10% tip mass reduction over the Prestige Series and use ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Platinum3 uses a specially Grado designed elliptical diamond.Extreme PrecisionGrado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise while improving tracking. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we assemble.House of JarrahAfter the Platinum3 cartridge is crafted, it is then placed inside an Australian Jarrah housing. Jarrah is necessary for the majority of Timbre Series with its ability to produce surgically precise clarity without losing any depth. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies.Hand Assembled in BrooklynEach Platinum3 is hand assembled by our team in Brooklyn, as it has been for decades. Fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Platinum3 steady and producing the Grado signature sound.

520 €

Grado Reference RS1x

Tri-Wood OasisLeading the way for our 4th gen X Drivers, the redesigned RS1x combines maple, hemp, and cocobolo wood into a vivacious and elegant headphone.The Sound of WoodFor the first time, three different wood species are working together in a Grado headphone. The housing is made of a maple sleeve, hemp core, and cocobolo outer ring. For decades we’ve used wood for its warm and embracing tonal abilities, but finding the right balance of three separate woods is no simple task. The reward though is an RS1x that opens Grado to a new level of sound.Signature SoundPulling everything we can from the new 50mm X Driver, our signature sound is brought to new heights when combined with maple, hemp, and cocobolo. Maple takes care of most of the work, hemp smooths out top and low ends, while cocobolo adds that extra punch. Together the sound the woods produce, when combined with our special processes, are full-bodied, dynamic, and truly defined.X Series DriversThe RS1x is the first headphone to be built with the larger 50mm X Drivers. Specifically tuned for the tri-wood RS1x, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 50mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music.New Cable & HeadbandsAlong with the speakers, the cables and headband have been redesigned for the RS1x. Housed in a more durable exterior, the now super annealed copper 8-conductor cable reveals even more of your music with improved purity. The new black leather headband features a white-stitched accent.Hand Assembled in BrooklynFounded on a kitchen table in 1953, and working with wood for over a quarter century, Grado Labs has been perfecting the art of sonic reproduction every day since. This RS1x has traveled from workbench to workbench until ready for your ears. Every experience since that kitchen table has led to the creation of the RS1x.

975 €

Grado GT220 Wireless Black

Look Mom, No WiresOur first true wireless headphones, the GT220 continues our journey of making Grado’s signature sound wireless.Ready When You AreOur first true wireless in-ears, the GT220 mark a milestone in our seven decades of audio. Years in the making, we didn’t want to rush the process of creating a compact and versatile wireless Grado headphone with such vocality and depth. Control music, calls, and more with just a tap, or your voice with the built-in microphone. Easy to always have around, they’re ready when you are.A Day (and a Half) in the LifeBattery life is a major focus for us. With 36 hours of listening, the GT220 are up for anything from a subway ride to work to your next coast-to-coast flight. The true wireless headphones hold 6 hours of playtime, while their case can charge them back up 5x over.Wireless ChargingDon’t give up a precious cable when a wireless charger is on the table. The GT220 case has both USB-C and wireless charging options. Whether you’re throwing it on for a quick charge before you run out, or plugging it in over night, the choice is yours.Music, Voice, Calls, & MoreThe GT220 has a bifurcated capacitive touch system: the left side controls phone & voice, while the right side controls music playback. With a twist to lock, the GT220 can create a tight seal in your ear which plays a major role in sound reproduction. We’ve also included full volume control for when you’re half awake on a flight and don’t feel like taking your phone out.Signature SoundThe midrange response is neutral and musical without any coloration, while the bass is definitive with excellent extension. The high frequency response is natural without any stridency. No matter the size, we give all our drivers an equal amount of love. We spent as much time as needed tuning and fitting our signature mini-drivers for these TWS headphones.

337 €

New

Grado Statement GS1000x

Two to TangoContinuing over two decades of one of the most important headphone designs, the now hybrid GS1000x reaches new heights when paired with X Drivers, new cables, and for the first time a combination of mahogany and ipê wood.The Sound of WoodGrado has been working with mahogany longer than any other wood, it’s a skill we’ve been honing for generations. The materiality of the GS1000x goes even further now that we’ve paired it with ipê wood, a tropical and durable wood that pairs incredibly well with mahogany. This marriage elevates the signature sound of the GS1000x. Mahogany exudes warm tones while ipê acts as a sturdy base for the any sound passing through its grain.A Spacious SoundstageJourney inside the music and hear the space between instruments with the unique soundstage of the GS1000x. This is only possible when our large cushions, 50mm driver, 12-conductor cable, and large housing work in unison.X Series DriversThe GS1000x is the first full-bodied headphone to take advantage of the larger 50mm X Drivers. Specifically tuned to bring forth the warmth mahogany produces, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 50mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music.New Cable & HeadbandsAlong with the speakers, the cables and headband have been redesigned for the GS1000x. Housed in a more durable exterior, the now super annealed copper 12-conductor cable reveals even more of your music with improved purity. The new black leather headband features a white-stitched accent.Hand Assembled in BrooklynOur first wooden headphones were built in the middle of the night back in 1994 by John Grado. Wood has been a staple on our workbench ever since. Each GS1000x headphone is hand-built by our team in Brooklyn - these headphones go from workbench to workbench until they’re ready for your ears. We started building on a kitchen table in 1953, and every experience since then has led to the GS1000x.

1.554 €

Grado Prestige SR125x

Black is the Color of SpaceContinue up the Prestige Series to bring a balance to your music with the speedy and consistent SR125x.Out of the ShadowThe SR125x and SR225x have had a sibling rivalry for decades. Being the younger one, the SR125x utilizes its quick driver to keep up with any music it plays while also being more affordable. Just don’t tell their big sister.Signature SoundThe clarity and range of Grado headphones can reveal new notes and details in songs heard hundreds of times. The driver and housing working in tandem react to sound vibrations and virtually eliminate transient distortions. With harmonic colors, full bodied vocals, excellent dynamics, and a world renowned mid-range, the SR125x produces a sound that’s pure Grado.X Series Driver4th Generation Grado drivers are here. Specifically tuned for the SR125x, this new speaker design features a more powerful magnetic circuit, a voice coil with decreased effective mass, and a reconfigured diaphragm. Reengineering these components for our 44mm drivers improve efficiency, reduces distortion, and preserves the harmonic integrity of your music.New Cables & HeadbandAlong with the speakers, the cables and headband have been redesigned for the SR125x. Now housed in a more durable exterior, the 8-conductor cable transfers more information and features a super annealed copper wire for improved purity of the audio signal. The new headband features more cushion for a comfier experience. Hand Assembled in BrooklynFounded on a kitchen table in 1953, Grado Labs has been perfecting the art of sonic reproduction every day since. This SR125x has traveled from workbench to workbench until ready for your ears. Every experience since that kitchen table has led to the creation of the SR125x.

228 €

Grado Timbre Opus3

A Grand EntranceBringing extreme levels of clarity over the full frequency range, the Opus3 bridges together entry-level and mid-range. The Opus3 is the easiest way to enter the family of our wooden cartridges.Bridging the GapThe Opus3 exists specifically to bring the entry-level and the mid-range phono cartridges closer together, creating an even tighter ecosystem of cartridges. We worked on the Opus3 knowing we wanted to have a cost-effective wooden cartridge while at the same time taking advantage of the techniques and processes used in the higher-end models. If taking a step up in your turntable setup is on your to-do list, start here.First of its KindWhen it comes to the Opus3, there are a few “firsts”. This is the first cartridge with a maple wood housing, as well as the first to use what we learned with our high-end cartridges at such an entry-level price. The housing is a new shape but still keeps the wood working in tandem with the cartridge inside. This is also the first cartridge assembled specifically with the Timbre Series in mind.Extreme PrecisionGado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we assemble.House of MapleThe Opus3 is nestled inside a maple housing, something a cartridge has never done before. After years of working with maple from our Heritage and Statement Series headphones, we knew it was time to bring it to a turntable. Maple produces a vibrant and luscious sound, while staying consistent and clear. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies.Hand Assembled in BrooklynEach Opus3 is hand assembled by our team in Brooklyn. Fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Opus3 steady and producing the Grado signature sound. We started with cartridges on a kitchen table in 1953, and every experience since then has led to the creation of the Opus3.

358 €

Grado Prestige Silver 3

Mellow YellowBoth the Silver3 and Gold3 use a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. With the Silver3 and Gold3, a machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Silver3 & Gold3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Silver3 & Gold3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Silver3 & Gold3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Silver3 & Gold3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

312 €

Grado Prestige Gold 3

Mellow YellowBoth the Silver3 and Gold3 use a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. With the Silver3 and Gold3, a machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Silver3 & Gold3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Silver3 & Gold3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Silver3 & Gold3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Silver3 & Gold3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

338 €

Grado Prestige Red 3

Awesome sound in red states and blue statesBoth the Blue3 and Red3 use a four piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Red3 are hand selected from Blue3 production runs which meet higher test specifications. Approximately 10% of the run usually exhibits these specs and become a Red3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Red3 & Blue3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Red3 & Blue3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Red3 & Blue3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Red3 & Blue3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

247 €