M2Tech

The Crosby is a versatile high efficiency class-D stereo power amplifier which doesfor a perfect pair with the Young MkIII, both in size and sound. Its clean power is enough for most speakers, while its drive capability can be improved by setting it in bridge mode.In this case, the Crosby becomes a powerful mono amplifier; two Crosby in bridge mode can drive virtuallyevery speaker, be it an array of dynamic drivers or an electrostatic panel. Of course, the Crosby can be attached to every preamplifier, not only to the Young MkIII.It is provided with both single-ended and balanced inputs, plus trigger input/pass-through. Thanks to its class-D design, it is virtually impossible to destroy,all overload situations are reported on the front panel. Specifications : Inputs:single-ended (RCA)balanced (XLR)trigger (3.5mm jack) Outputs:speakers (posts)trigger pass-through (jack 3.5mm) Sensitivity:1.25Vrms5V (trigger) Input impedance:47 kOhms (single-ended)20 kOhms (balanced) Signal-to-Noise Ratio:115dBA (stereo)118dBA (bridged) THD+N:0.005% @ 60Wpc out on 8 Ohms Output Power Before Clipping:60Wpc (stereo, 8 Ohms)110Wpc (stereo, 4 Ohms)180W (bridged, 8 Ohms) Supply voltage:100-130VAC or 200-240VAC, 50/60Hz Power Consumption:615W (440Wpc on 4 Ohms mono)1.5W (standby) Size:200x200x50mm (wxdxh) Weight:net 3kg (including ancillaries)gross 3.5kg

The Nash is a dedicated preamplifier and phono equalizer for every cartridge model. It is provided with two phono inputs, one for low-level MC cartridges and one for medium-high level MC cartridges and MM cartridges. Its FET-input, all-discrete components circuits feature vanishingly low noise and plenty of gain, allowing for a stunning 2.5Vrms output with 5mV on MM and 170uV on MC. The passive RIAA is implemented with high precision polypropylene capacitors. MC interface paramenters (input impedance and MC pre-pre gain) are set by potentiometer from the rear panel. As well, MM interface parameters (input impedance and capacity load) are set by DIP-switches, again from the rear panel. The Nash is provided with a Bluetooth BLE interface for control and configuration. An Android (and soon iOS) app will allow user to fully control the unit and set the configuration parameters. A comprehensive, continuously updated pickups database will make configuration faster and easier. You control the Nash by the front panel encoder, using the remote control or by the dedicated Android app via Bluetooth. Operation data are displayed on a high readability OLED display. A menu allows for setting parameters like: anti-rumble filter, MM input stage gain, etc. Two auxiliary line-level inputs make the Nash a hub or switching box for analog sources, an interesting add-on when the Nash is used together with the Young MkIII, to fully exploit the latter’s only analog input. A Young MkIII-Nash-based system may have a total of four analog sources: two phono and two line-level. The Nash noise and sound performance can be further increased by replacing the stock wall adaptor with the Van Der Graaf MkII Low Noise Power Supply. Specifications : Output Voltage:2.5Vrms (MM, 5mV input, 55dB gain) Inputs:phono MC (RCA)phono MM (RCA)2 x line-level (RCA)external power supply (4-pin XLR)trigger (3.5mm jack) Outputs:equalized line-level (RCA)trigger pass-though (jack 3.5mm) MM gain:55dB60dB65dB MC pre-pre gain:3dB to 30dB Total MC gain:58dB to 95dB MC Input impedance:10 Ohms to 50 kOhms MM Input impedance:47 kOhms15 kOhms MM Input capacitance:0pF100 pF220 pF330 pFany combination of the above Signal to noise ratio:85dBA (MM, 60dB gain)78dBA (MC, 70dB gain) Output impedance:5 Ohms Trigger input voltage:5V to 12V Supply voltage:15VDC (stock adaptor input)+5VDC;+15VDC;-15VDC (external power supply input) Power Consumption:4W (operational)0.23W (standby) Size: 200x200x50mm (wxdxh) Weight:net 2kg (including ancillaries) gross 2.5kg

hiFace DAC 384/32 φορητός ασύγχρονος ψηφιοαναλογικός μετατροπέας. Υποστηρίζει ασύγχρονη σύνδεση με τον υπολογιστή και αναπαραγωγή έως 384kHz-32 bits και μπορεί να συνδεθεί απευθείας με ενισχυτή ή ευαίσθητα ακουστικά. Είσοδος: USB. Έξοδος: stereo jack. Output voltage: 2.0Vrms @10kOhms. THD+N: 112dB (@ 1kHz, A-weighted) Συμβατότητα Windows:Direct Sound, Kernel Streaming, WASAPI και ASIO. Συμβατότητα Mac: Integer mode και Direct mode. Συμβατότητα Linux.Χαρακτηριστικά:Connections: Input 1 x USB A type maleOutput 1 x 3.5mm stereo jack socket
I/OStandard: Input USB 2.0 Audio Format, Output stereo analogSampling Frequency 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz, 352.8kHz, 384kHz
Resolution 16 up to 32 bitOutput voltage: 2.0Vrms @10kOhmsFrequency response: 5-22kHz (fs=44.1kHz) - 5-150kHz (fs=384kHz)THD+N: 112dB (@ 1kHz, A-weighted)Dimensions:8.8(d) x 1.4(h) x 2(w)
Power Supply:5V DC from USB bus
Temperature: 0°C to 70°C
Weight: 20gr approx.