Naim

Major performance upgrades and now with added love for vinyl. In the six years since the last NAIT integrated amplifiers were released, our research and development team have worked on a range of amplifier improvements. The result is upgraded power amplifier sections for SUPERNAIT 3, delivering greater pace and intimacy to their musical delivery – whether it's driving a pair of loudspeakers or your favourite pair of headphones. SUPERNAIT 3 has received significant performance upgrades, including a built-in phono stage, making it a perfect partner for turntables, as well as for streamers, CD players, or any other music source people want to enjoy with the signature Naim sound. It also includes a Class A preamp output stage which doubles as a headphone amplifier and ceramic heatsink technology that minimises capacitive coupling between the chassis and output transistors for optimum sound quality. Its inputs are each individually decoupled and hand-wired to minimise noise and interference while internal switching employs ultra-low-noise, constant current sources which are derived directly from the electronic design of the flagship NAC 552 preamplifier. The SUPERNAIT 3 can be upgraded with our external power supplies, power amplifiers and even cabling upgrades to get the best from all sources.  With our typical obsessive attention to detail – all in service of achieving the most authentic musical performance – the SUPERNAIT 3 benefits from the following features: Class A headphone amplification Alps Blue Velvet volume control Reed relay input selection Ceramic insulators for the power transistors Galvanically isolated microprocessor control section Microphonic-isolating PCB mounts Step up from the NAIT XS3 to the SUPERNAIT 3 and you benefit from a range of superior features, all designed to deliver even better sound quality: Full 24V DR module built-in: enjoy the purer power and performance improvement of Naim’s Discrete Regulation technology for the entire pre-amp stage. Larger toroidal transformer in the power supply: provides greater power and speed of recovery Additional leaded through-hole components in the signal path: further minimises negative effects of vibration and transient thermal conditions Chassis-mounted input sockets hand-wired to the circuit boards: offers enhanced vibration isolation Full Alps Blue Velvet balance control Our R&D team has found a way to more than double the speed of the voltage gain stage, which in turn doubles the rate at which the speaker output stage can react. The second gain stage transistors have been optimised, so they no longer need to be shielded by a cascode stage transistor. Removing the cascode means less amplifier stabilisation is required: that doubles the slew rate and delivers an uplift in sound quality. The phono circuit topology comprises 3 stages: the gain stage, passive equalisation and final gain and active equalisation. This enables excellent noise performance, extended RIAA equalisation beyond the audio band and great overload headroom. All RIAA equalisation capacitors and the RIAA resistors are ‘through-hole’ mounted film designs, with low microphonic pickup and excellent transient performance. As phono stages are 1000x more sensitive than other inputs, this greatly benefits the sound quality. Input impedance is 47kΩ in parallel with 470pF capacitive loading;  the gain is perfect for 5mV moving magnet cartridges. Audio Inputs: MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V Power Amp In: DIN Socket Audio Outputs: Powered Accessory Sockets: +24V for Naim phono amplifier Speaker Outputs: 80W per channel into 8 ohms (4mm sockets), 130W per channel into 4 ohms Line Outputs Variable (level): Pre-amp (DIN), Bi-amp (DIN), Sub (RCA pair) 775mV,

Ο CI-NAP 108 είναι ένας τελικός ενισχυτής 8 καναλιών, σχεδιασμένος να αποτελεί τον τέλειο συμπλήρωμα για μια Custom Integration ηχητική εγκατάσταση, ειδικά για τα εντοιχισμένα ηχεία hi-fi της Focal. Σε συνδυασμό με το CI-Uniti 102, μπορεί να χρησιμοποιηθεί για την ενίσχυση πολλαπλών ηχείων σε διαφορετικά δωμάτια ή για την ενίσχυση οκτώ ξεχωριστών ηχητικών ζωνών, χάρη στις τοπικές εισόδους σε κάθε ενισχυμένο κανάλι. Αποτελεί την απόλυτη λύση ενίσχυσης για ένα σύστημα συνώνυμο της αξεπέραστης ισχύος και ποιότητας ήχου.Βασικά Σημεία για τον NAP 10810 είσοδοι RCA, συμπεριλαμβανομένων 8 τοπικών εισόδων και 2 εισόδων L/R bus.10 έξοδοι RCA για σειριακή σύνδεση με άλλους ενισχυτές, όπως ο CI-101.Αθόρυβος, αποδοτικός και συμπαγής ενσωματωμένος τελικός ενισχυτής.Δύο έξοδοι Euroblock ανά κανάλι για εύκολη παράλληλη σύνδεση ηχείων.Ανεξάρτητος έλεγχος στάθμης.Ανίχνευση σήματος εισόδου με αυτόματη απενεργοποίηση μετά από 20 λεπτά.Τροφοδοσία ρεύματος από 100V έως 240V.

Το CI-Uniti 102 είναι ένας δικτυακός ενισχυτής που συνδυάζει μουσική, απόδοση και ευελιξία. Η αποστολή του: να ενσωματώνεται διακριτικά στον χώρο σας, εσωτερικό ή εξωτερικό, να ενισχύει τα Custom Integration ηχεία της Focal και να μεταμορφώνει τον ήχο από όλα τα μέσα (τηλεόραση, πλατφόρμες streaming μουσικής, κονσόλες βιντεοπαιχνιδιών κ.λπ.). Χάρη στο ενσωματωμένο DSP, επιτρέπει την πλήρη ρύθμιση συστημάτων και μπορεί να διασυνδεθεί με τα CI-NAP 108 και CI-NAP 101, προσαρμοζόμενο σε κάθε κατάσταση, προσφέροντας εντυπωσιακά ηχητικά αποτελέσματα.CI-UNITI 102: μερικά βασικά σημεία:Δυνατότητες streaming ενσύρματα και ασύρματα: TIDAL, TIDAL Connect, Qobuz, Spotify, UPnP™, Internet Radio, Airplay 2, ChromeCast.Πολυδιάστατη συνδεσιμότητα: HDMI, Bluetooth®, S/PDIF, αναλογικό, είσοδος RCA, λήψη από δίκτυο Dante.Ενσωματωμένος ενισχυτής ισχύος εξαιρετικά χαμηλού θορύβου και συμπαγής, με ισχύ 150W στα 8 ohms.Δύο ανεξάρτητες στερεοφωνικές εξόδους RCA που μπορούν να χρησιμοποιηθούν για υπογούφερ ή υποζώνες.Έξοδοι trigger για απομακρυσμένη αναμονή των CI-NAP 108 και CI-NAP 101.Τροφοδοσία ρεύματος από 100V έως 240V.

Ο CI-NAP 101 είναι ένας εξαιρετικά αθόρυβος μονοφωνικός τελικός ενισχυτής, συμβατός με ηχεία 70V/100V. Είναι συμπαγής και τοποθετείται εύκολα σε rack για διακριτική εγκατάσταση, καθιστώντας τον ιδανικό για την ενίσχυση υπογούφερ ή εντοιχιζόμενων και εγκαταστατικών ηχείων που απαιτούν υψηλή ισχύ, ενώ προσφέρει εξαιρετική ποιότητα ήχου. Επιπλέον, μπορεί να συνδυαστεί με επεξεργαστή ήχου-εικόνας για προσαρμοσμένες και προηγμένες εγκαταστάσεις.CI-NAP 101: μερικά βασικά σημείαΕίσοδοι και έξοδοι RCA στερεοφωνικές για σειριακή σύνδεση.Δύο έξοδοι Euroblock για εύκολη παράλληλη σύνδεση ηχείων.Ενίσχυση υψηλής αντίστασης 70V/100V με επιλέξιμο φίλτρο high-pass.Έλεγχος στάθμης.Ανίχνευση σήματος εισόδου με αυτόματη απενεργοποίηση μετά από 20 λεπτά.Τροφοδοσία ρεύματος από 100V έως 240V.

All-in-one player - Πιο ισχυρό από ποτέΗ βραβευμένη σειρά Uniti της Naim αποκτά το ισχυρότερο μέλος της, το Uniti Nova PE (Power Edition). Ένα σύστημα αναπαραγωγής μουσικής που βρίσκεται σε μία μόνο συσκευή και είναι αρκετά ισχυρό για να οδηγήσει τα πιο απαιτητικά ηχεία και να γεμίσει μεγάλους χώρους, χάρη στην ενσωμάτωση της κορυφαίας τεχνολογίας ενίσχυσης Class D από τη Naim. Σχεδιασμένο και κατασκευασμένο στη Βρετανία, αυτή η νέα Power Edition αποτελεί το αποκορύφωμα 50 χρόνων καινοτομίας μηχανικής, προσφέροντας το πιο αποδοτικό, ισχυρό και οικολογικό streaming προϊόν all-in-one μέχρι σήμερα.

Major performance upgrades and now with added love for vinyl. In the six years since the last NAIT integrated amplifiers were released, our research and development team have worked on a range of amplifier improvements. The result is upgraded power amplifier sections for SUPERNAIT 3, delivering greater pace and intimacy to their musical delivery – whether it's driving a pair of loudspeakers or your favourite pair of headphones. SUPERNAIT 3 has received significant performance upgrades, including a built-in phono stage, making it a perfect partner for turntables, as well as for streamers, CD players, or any other music source people want to enjoy with the signature Naim sound. It also includes a Class A preamp output stage which doubles as a headphone amplifier and ceramic heatsink technology that minimises capacitive coupling between the chassis and output transistors for optimum sound quality. Its inputs are each individually decoupled and hand-wired to minimise noise and interference while internal switching employs ultra-low-noise, constant current sources which are derived directly from the electronic design of the flagship NAC 552 preamplifier. The SUPERNAIT 3 can be upgraded with our external power supplies, power amplifiers and even cabling upgrades to get the best from all sources.  With our typical obsessive attention to detail – all in service of achieving the most authentic musical performance – the SUPERNAIT 3 benefits from the following features: Class A headphone amplification Alps Blue Velvet volume control Reed relay input selection Ceramic insulators for the power transistors Galvanically isolated microprocessor control section Microphonic-isolating PCB mounts Step up from the NAIT XS3 to the SUPERNAIT 3 and you benefit from a range of superior features, all designed to deliver even better sound quality: Full 24V DR module built-in: enjoy the purer power and performance improvement of Naim’s Discrete Regulation technology for the entire pre-amp stage. Larger toroidal transformer in the power supply: provides greater power and speed of recovery Additional leaded through-hole components in the signal path: further minimises negative effects of vibration and transient thermal conditions Chassis-mounted input sockets hand-wired to the circuit boards: offers enhanced vibration isolation Full Alps Blue Velvet balance control Our R&D team has found a way to more than double the speed of the voltage gain stage, which in turn doubles the rate at which the speaker output stage can react. The second gain stage transistors have been optimised, so they no longer need to be shielded by a cascode stage transistor. Removing the cascode means less amplifier stabilisation is required: that doubles the slew rate and delivers an uplift in sound quality. The phono circuit topology comprises 3 stages: the gain stage, passive equalisation and final gain and active equalisation. This enables excellent noise performance, extended RIAA equalisation beyond the audio band and great overload headroom. All RIAA equalisation capacitors and the RIAA resistors are ‘through-hole’ mounted film designs, with low microphonic pickup and excellent transient performance. As phono stages are 1000x more sensitive than other inputs, this greatly benefits the sound quality. Input impedance is 47kΩ in parallel with 470pF capacitive loading;  the gain is perfect for 5mV moving magnet cartridges. Audio Inputs: MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V Power Amp In: DIN Socket Audio Outputs: Powered Accessory Sockets: +24V for Naim phono amplifier Speaker Outputs: 80W per channel into 8 ohms (4mm sockets), 130W per channel into 4 ohms Line Outputs Variable (level): Pre-amp (DIN), Bi-amp (DIN), Sub (RCA pair) 775mV,

For connecting Non Naim source components to a Naim pre-amplifier or Naim integrated amplifier. This cable measures 1.25m in length.

The quality of a hi-fi system depends on its sound source. Compatible with file formats used by top streaming devices and services, NSS 333 is a high-resolution streaming solution that delivers on its promise. The built-in DAC converter improves the performance of other devices in your system. Compatible with the entire Naim range, NSS 333 allows you to control your system easily from the Focal & Naim app. With NSS 333, you can find the most recent streaming platforms (Spotify connect, Apple Music, TIDAL, TIDAL Connect and Qobuz) and listen to your favourite radio stations. Thanks to the integrated AirPlay2, Chromecast, UPnP™, Roon Ready and Bluetooth® AptX technologies, streaming your content from your smartphone or tablet is easy and high quality. For total listening pleasure at home, this streamer is multi-room compatible with many connected Naim products.

Get the most out of your vinyl with NVC TT. Very easy to use, it is perfectly compatible with any turntable with MC cartridges and MM cartridges, and easily connects to NAC 332 or NSC 222 preamplifiers. When linked with its dedicated power supply, NPX TT, it offers high performance.

Το NAC 332 είναι η «αναλογική καρδιά» του συστήματός σας, προσφέροντας βέλτιστη απόδοση στον ενισχυτή και στα ηχεία σας. Ως ο πιο ευέλικτος προ-ενισχυτής της Naim μέχρι σήμερα, μπορείτε να συνδέσετε ακουστικά όπως και το NVC TT phono προ-ενισχυτή για να απολαμβάνετε βινύλια. Χρησιμοποιήστε το συμπεριλαμβανόμενο τηλεχειριστήριο για να ελέγχετε την ένταση και τις εισόδους σε ένα μόνο κλικ. Έχοντας πάρει στοιχεία από το Statement S1 προ-ενισχυτή, o NAC 332 συνδυάζει αποδοτικότητα και ευελιξία χάρει στις πολλές του λειτουργίες. Σας επιτρέπει να συνδέετε διάφορες πηγές, από έναν ενισχυτή, ακουστικά, όπως και πικάπ η CD player. Τα βελτιστοποιημένα κυκλώματα της Naim ευθύνονται για την άριστη μουσική απόδοση από όλες τις πηγές σας, ελαχιστοποιώντας τον ενδογενή θόρυβο για ασυμβίβαστη ποιότητα ήχου.

NPX TT is the dedicated power supply for the NVC TT preamplifier, providing it with even cleaner power. It connects to a number of separate elements, including existing Naim products such as NAC-N 272, enabling them to reach their full potential.

Ένας ενισχυτής ορόσημο, ο NAP 350 προσφέρει ακριβής μουσική επίδοση, μεγάλη ισχύ και μπορεί να συνδεθεί με μεγάλο εύρος hi-fi ηχείων. Μπορεί να χρησιμοποιηθεί σε συνδυασμό με άλλα NAP 350. Χάρη στο αθόρυβο σύστημα ψύξης, είναι πολύ εύκολο να εγκατασταθεί στο περιβάλλον της επιλογής σας χωρίς ηχητικές διακοπές. Ο NAP 350 και ο 175 Watt monoblock σχεδιασμός αποδίδει απίστευτες δυναμικές, καλύπτοντας τις ανάγκες μέχρι των πιο απαιτητικών μεγάφωνων. Προσφέρει απόλυτη συμβατότητα χάρη ειδικά στην balanced XLR είσοδο η οποία διευκολύνει συνδέσεις και μπορεί συνδυαστεί με έναν η περισσότερους ενισχυτές.

Ο NAIT 50, έκανε τα αποκαλυπτήριά του με αφορμή τα 50 χρόνια ζωής της Naim και είναι ο άξιος διάδοχος του θρυλικού NAIT 1 από το1983! Για να γιορτάσει η Naim τα 50 χρόνια κοινού πάθους για τον ήχο, μόνο 1973 κομμάτια αυτού του εμβληματικού προϊόντος είναι διαθέσιμα! Χάρη στην τεχνογνωσία των μηχανικών της εταιρείας, ο ενισχυτής, που κατασκευάστηκε στην Αγγλία, επωφελείται από πολλές τεχνικές βελτιώσεις στα κυκλώματα, οι οποίες προσφέρουν μια εξαιρετική εμπειρία ακρόασης, καθώς και μια έξοδο ακουστικών. Μπορεί να συνδεθεί με όλους τους τύπους ηχείων, καθώς και με streamer, για το απόλυτο σύστημα hi-fi.

Reach a higher level of musical performance with the NPX 300 power supply for the 200 Series sources and preamplifiers, including the NSC 222 streaming preamplifier. NPX 300 deactivates the internal power supply, immediately reducing noise, and provides a superior, cleaner power supply. You can connect several NPX 300 power supplies within the same configuration for an exceptional musical experience.

NSC 222 is an easy-to-use streaming preamplifier with multiple functions, offering uncompromising sound quality. With its high-precision engineering and exclusive British design from Naim, this product brings you a world of streamed music and radio, handling vinyl and audio headphones, as well as creating a high-performance analog preamplifier. Combine it with the NAP 250 power amplifier for an exceptional assembly: just add loudspeakers

Ο Naim NAP 250 εμφανίστηκε για πρώτη φορά το 1975 και η αισθητική και τεχνική του εξέλιξη, έχει εξασφαλίσει τη διαρκή κορυφαία απόδοση του όλα αυτά τα χρόνια, δημιουργώντας αξέχαστες μουσικές εμπειρίες. Το νέο μοντέλο έκτης γενιάς προσφέρει περισσότερη ισχύ από ποτέ. Η υπερσύγχρονη τεχνολογία του παρέχει ασυναγώνιστη απόδοση. Σχεδιασμένο στο Salisbury στην Αγγλία, μπορεί να συνδυαστεί με τα μεγάφωνα της επιλογής σας για να προσφέρει εξαιρετικές ακρόασεις.Για να αξιοποιήσετε στο έπακρο τα μεγάφωνα και τη μουσική σας, συνδυάστε το με τον προενισχυτή Streamer Naim NSC 222 τον τέλειο συνεργάτη του. Ο NAP 250 σήμερα, παρέχει περισσότερη ισχύ από ποτέ και προσφέρει ακόμη μεγαλύτερη ευελιξία. Οι τεχνολογίες αιχμής που περιλαμβάνονται στον NAP 250, σε συνδιασμό με τον κλασσικό ήχο της Naim έχουν ως αποτέλεσμα ασυναγώνιστες επιδόσεις. Παρέχει ισχύ 100 watts κλάσης A/B ανά κανάλι με εξαιρετική οδήγηση κάθε ηχείου και φορτίου για να ελευθερώσετε τη μουσική σας με τον πιο αξιοσημείωτο τρόπο

Super Lumina speaker cables are designed to minimise the effect of external and internal interference sources and preserve maximum signal fidelity. The fundamental cable design consists of several individually-insulated multi-strand silver-plated copper conductors of varying diameters enclosed in a tin-plated copper shield. This is all enclosed in a soft outer jacket which facilitates easy installation whilst minimising microphonic interference. Each signal, return, ground and shield conductor is individually manufactured for its specific function. Each Super Lumina cable is hand-assembled at Naim Audio in Salisbury to the customer’s specification of length and termination. The process is intricate and highly-skilled, following detailed instructions which cover every aspect of the build. Every cable also goes through a proprietary de-stressing process to relieve the materials of the inherent stresses which are a result of the manufacturing process. This means the cables reach optimum performance with minimal run in time.  

Our Fraim equipment support system has been carefully designed to provide the perfect platform for Naim Audio electronics to shine. Each level is carefully isolated from the next using a cup-and-cone interface. An additional, double-layer base platform provides further isolation from resonance. A toughened glass sub-shelf rests on minimal-contact ball decouplers, providing even more isolation.From the stainless steel spikes, which complete the process of isolation, to the zinc-plated steel nuts and studs that tie everything together, each individual component of the Fraim has been selected for its effect on sound quality. You’d expect nothing less from us. FeaturesFraim platforms available in Natural Ash, Cherry (tinted and non-tinted) and Black finishesExtruded, anodised aluminium Fraim legs available in three heights, and in silver or black finishesModular design allows for system expansion over timeFully decoupled structure with inter-level cup-and-cone interfaces and toughened glass sub-shelf supported on ball bearingsDouble-layer base level plus stainless steel floor spikes for maximum isolationOptimised shelf spacing to reduce magnetic interaction between componentsTechnology & CraftOur development of the Fraim marked the first time the full engineering resources of a high-end audio manufacturer had been deployed in the design of an equipment stand. The Fraim brings more detail, pace and focus to music, working in harmony with the Naim Audio philosophy that makes the fundamentals of music – pitch, timing and dynamics – the priorities.The Fraim principle is that successive minimal contact interfaces progressively decouple the transmission of mechanical energy. This includes the micro-vibrations created when products are immersed in a sound field and those generated by all products while operating, including power supplies. At the same time the interfaces provide a fixed reference plane on which the internal isolation systems of each item of electronics can perform optimally. Additionally, the shelf height options are configured to ensure that magnetic field interaction between electronic products is minimised.Fraim material selection is as significant as the arrangement of its components. Super hard stainless steel, toughened glass selected following intensive listening tests, large section anodised aluminium extrusion and veneered wood composites all contribute to equipment support that both performs to perfection and perfectly complements the Naim Audio aesthetic.Self OptionsThe price shown is for a Naim Fraim Shelf Unit only. These shelves are available in heights of "standard" at 115mm, "medium" at 190mm and "tall" at 264mm. The Naim Fraim Base is available for a full stand as pictured - please contact us for a quote.

FraimLite is a stripped back version of Naim's reference Fraim, and operates on the same principles, providing a rigid, self-levelling platform for supported hi-fi equipment that isolates hi-fi separates from each other and their environment. Its simplified design results in a more affordable and simpler-to-set-up equipment support system that still looks stunning in a modern domestic listening room.FraimLite consists of individual levels that are placed one upon another and which can be added or completely changed in configuration as the equipment is upgraded. Its self-levelling tripod structure means there are no adjustments needed to remove rocking or vibration and assembly is quick and easy.The FraimLite uses the same high-calibre materials, minimal contact cone and cup interfaces and floor spikes as the Fraim. The FraimLite forgoes the glass sub-shelf and ball bearing decouplers of the Fraim and has only a single base layer. This accounts for the difference in performance between the two models and has the advantage of making FraimLite more cost effective and even easier to transport and assemble.As with the Fraim, the spacing between levels is designed to minimise magnetic field interactions between the equipment, and non-ferrous materials have been used wherever possible to further reduce magnetic effects.Stand OptionsThe price shown is for a Naim FraimLite Twinpack Standard Unit only.Separate additional shelves (in heights of "standard" at 115mm, "medium" at 190mm and "tall" at 264mm) as well as color combinations, are available for a full stand as pictured. Please contact us for a complete quote. 

FraimLite is a stripped back version of Naim's reference Fraim, and operates on the same principles, providing a rigid, self-levelling platform for supported hi-fi equipment that isolates hi-fi separates from each other and their environment. Its simplified design results in a more affordable and simpler-to-set-up equipment support system that still looks stunning in a modern domestic listening room.FraimLite consists of individual levels that are placed one upon another and which can be added or completely changed in configuration as the equipment is upgraded. Its self-levelling tripod structure means there are no adjustments needed to remove rocking or vibration and assembly is quick and easy.The FraimLite uses the same high-calibre materials, minimal contact cone and cup interfaces and floor spikes as the Fraim. The FraimLite forgoes the glass sub-shelf and ball bearing decouplers of the Fraim and has only a single base layer. This accounts for the difference in performance between the two models and has the advantage of making FraimLite more cost effective and even easier to transport and assemble.As with the Fraim, the spacing between levels is designed to minimise magnetic field interactions between the equipment, and non-ferrous materials have been used wherever possible to further reduce magnetic effects.Stand OptionsThe price shown is for a Naim FraimLite Standard Unit only.Separate additional shelves (in heights of "standard" at 115mm, "medium" at 190mm and "tall" at 264mm) as well as color combinations, are available for a full stand as pictured. Please contact us for a complete quote. 

FraimLite is a stripped back version of Naim's reference Fraim, and operates on the same principles, providing a rigid, self-levelling platform for supported hi-fi equipment that isolates hi-fi separates from each other and their environment. Its simplified design results in a more affordable and simpler-to-set-up equipment support system that still looks stunning in a modern domestic listening room.FraimLite consists of individual levels that are placed one upon another and which can be added or completely changed in configuration as the equipment is upgraded. Its self-levelling tripod structure means there are no adjustments needed to remove rocking or vibration and assembly is quick and easy.The FraimLite uses the same high-calibre materials, minimal contact cone and cup interfaces and floor spikes as the Fraim. The FraimLite forgoes the glass sub-shelf and ball bearing decouplers of the Fraim and has only a single base layer. This accounts for the difference in performance between the two models and has the advantage of making FraimLite more cost effective and even easier to transport and assemble.As with the Fraim, the spacing between levels is designed to minimise magnetic field interactions between the equipment, and non-ferrous materials have been used wherever possible to further reduce magnetic effects.Stand OptionsThe price shown is for a Naim Fraim Lite Base & Standard Unit only.Separate additional shelves (in heights of "standard" at 115mm, "medium" at 190mm and "tall" at 264mm) as well as color combinations, are available for a full stand as pictured. Please contact us for a complete quote.

Το Uniti Atom Headphone Edition μπορεί να μετατρέψει οποιοδήποτε χώρο σε δικό σας “κουκούλι” ήχου! Όταν οι τυπικοί ενισχυτές ακουστικών απαιτούν σύνδεση σε έναν υπολογιστή, το Uniti Atom Headphone Edition διαθέτει δικό του εγκέφαλο - και την αποκλειστική πλατφόρμα ροής της Naim.

Naim Audio has proudly designed and handcrafted music systems in the historic English city of Salisbury for almost 50 years. Just outside the city lies the World Heritage site of Stonehenge, its Neolithic standing stones perfectly framing the movements of the sun. We didn’t need to look far for naming inspiration for this very Special Edition, nor did we need to deviate from our own heritage: although Solstice is our first turntable, we have been venerating vinyl since the genesis of Naim in the late 1960s. If you love the organic authenticity of vinyl, you can now finally enjoy it with the musical purity and passion only a Naim system can deliver - welcome to a new dawn for music.

Το Uniti Atom Headphone Edition μπορεί να μετατρέψει οποιοδήποτε χώρο σε δικό σας “κουκούλι” ήχου! Όταν οι τυπικοί ενισχυτές ακουστικών απαιτούν σύνδεση σε έναν υπολογιστή, το Uniti Atom Headphone Edition διαθέτει δικό του εγκέφαλο - και την αποκλειστική πλατφόρμα ροής της Naim.

The XPS is a simple and effective upgrade to enhance the music-making ability of your Naim Audio source component. As one of our most flexible performers it can be used to upgrade our CDX2 CD player and DAC digital to analogue converter, and it is also suitable for use with our NDS, NDX and ND5 XS network players and HDX hard-disk player/server. Its large toroidal transformer features four separate windings, coupled to six low-noise regulators and benefits from Naim Audio DR voltage regulator technology Features: Four isolated transformer windings with six low-noise DR power regulators - configured as two isolated regulators for digital at +15V, isolated +/-10V for DACs and isolated +/-23V for analogue stages All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s best-ever standards of stable, low-noise power Brushed, black-anodised aluminium chassis plus anti-vibration feet Technology & Craft The Naim Audio XPS is a highly sophisticated power supply with six separately regulated, very low noise outputs, featuring a toroidal transformer and six power regulators. These supplies are branched and re-regulated, some twice in the CD player. The addition of anti-vibration, resonance-controlling feet complement the elegant cast and extruded anti-magnetic chassis protect the sensitive internal components from resonance and microphonic vibration. The XPS was updated in 2012 as a result of a two year project to develop a new discrete regulator (DR) for Naim Audio power supplies. The new Naim Audio DR now features, alongside improvements to the mechanical decoupling and internal layout. These enhancements, developed through intensive listening tests, significantly raise performance and make music even more communicative and enjoyable. Please note  Only new classic series XPS units are compatible with the NDX network player, not ‘Olive’ versions. The old ‘Olive’ XPS is still compatible with CDX and CDS model CD players, the HDX hard disk player and the DAC digital to analogue converter however. Please consult your Naim Audio retailer if you are unsure of compatibility. Finish: Case: Black powder coated Front: Brushed and black anodised Outputs: Power Outputs: ± 22V, ± 10V, 2 x 15V Physical: Shipping Weight: 15.1 kg Shipping Dimensions: 240 x 590 x 500mm Weight: 12.4 kg Dimensions (HxWxD): 87 x 432 x 314mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Supplied with: Supplied with: Burndy Upgrades: Other: Power-Line Lite mains cable (UK denominations only)

The SNAIC family of interconnects use a cable which is custom manufactured to our specification to provide the ideal impedance, capacitance and conductivity for Naim Audio products. Each SNAIC interconnect is meticulously hand-built in-house using established production techniques.

The SNAIC family of interconnects use a cable which is custom manufactured to our specification to provide the ideal impedance, capacitance and conductivity for Naim Audio products. Each SNAIC interconnect is meticulously hand-built in-house using established production techniques.

During the development of the reference CD555 CD player, a special project ran in parallel; to develop a new signal cable that would exceed the performance our standard signal cable. The brief was to investigate all parameters of a signal carrier; to improve the whole rather than just improving the cable as is the more normal development practice. The result of this pure development project is the Hi-Line signal cable. Available with both DIN and RCA terminations, its patented Air-PLUG connector is a decoupling device that reduces vibration transmitted along the cable itself, preserving your system’s precious musicality. Features Patented Air-PLUG decoupling mechanism prevents vibration transmission through the cable Twisted-pair cable construction consisting of 80 litz conductors surrounded by individual spiral shielding layers of PTFE and Kapton RCA or DIN terminations available, plus DIN-to-RCA if needed Technology & Craft The Hi-Line Air-PLUG (patented) is designed as a decoupling device to minimise microphonic interference and preserve the integrity of the audio signal. The many different rear sections of the Air-PLUG are clipped together to form a lossy flexible section. The cable is clamped compliantly to the end of this flexible section. The cable itself was also carefully designed to preserve audio signal integrity so improving sound quality. It is manufactured from twisted pairs of 80 Litz conductors surrounded by PTFE, Kapton and PTFE tape all then enclosed within a semi conductive shield to reduce static charges. This is then wrapped by two spiral wound copper shields and lapped PTFE tape. Two of these assemblies side by side are then wrapped in layers of PTFE tape and finally a rubber outer covering. This gives a two-channel cable where the signal and RF grounds are held in a static position relative to each other negating any difference in field between them.

The SNAIC family of interconnects use a cable which is custom manufactured to our specification to provide the ideal impedance, capacitance and conductivity for Naim Audio products. Each SNAIC interconnect is meticulously hand-built in-house using established production techniques.

During the development of Statement, our flagship amplification system, our engineers realised that they would need to design a whole new range of high-performance cables for it to reach its true potential.  With this in mind they began a development project to design interconnects and speaker cable that would meet Statement standards of performance. Through a deep understanding of material science and after thousands of hours testing in the listening room, the Super Lumina range was born. Designed to maximise the performance of Statement but equally at home in 500 Series and Classic Series systems, Super Lumina pre to power amp interconnects are available with DIN to XLR, and XLR to XLR terminations. Super Lumina source to preamplifier interconnects are available with DIN to DIN, DIN to RCA, RCA to RCA and RCA to XLR connectors. Features Super Lumina interconnects are designed to minimise the effect of external and internal interference sources and preserve maximum signal fidelity.The fundamental cable design consists of several individually-insulated multi-strand silver-plated copper conductors of varying diameters enclosed in a tin-plated copper shield. This is all enclosed in a soft outer jacket which facilitates easy installation whilst minimising microphonic interference. Each signal, return, ground and shield conductor is individually manufactured for its specific function. The Naim Audio Air-PLUG The Super Lumina interconnects feature an advanced version of Naim Audio’s patented Air-PLUG technology first introduced for the Hi-Line. All DIN and XLR connectors use the Air-PLUG connector which is designed as a decoupling device to minimise microphonic interference and preserve the integrity of the audio signal. The new Super Lumina Air-PLUG features multiple individual aluminium rings which form the rear of the connector. These are screwed together to form an articulating section which inhibits the passage of unwanted energy, the choice of aluminium as a material enhances this process. The connector pins on DIN terminated cables also float within their sockets, extending the decoupling effect right to the point where the signal enters the product.

Naim Air Plug Z offers custom ohms loading for Superline phono preamp, for the best playback of various cartridges

To us, a smooth, stable, low-noise supply is critical. It’s absolutely fundamental to performance. That’s why we designed the Power-Line mains cable. Its complex, precision-engineered construction has been defined and refined following solid mechanical engineering principles and then confirmed after hundreds of hours of testing in the listening room. We invite you to experience the difference it can make to your system for yourself at your local Naim Audio retailer. You won’t be disappointed.  Features Thermoset resin plug cases with floating pins for superior electrical contact 4mm2 copper conductors with individual dielectric insulation Rubber outer sheath for high levels of inherent mechanical damping 2m length for added flexibility with installations Technology & Craft The Power-Line mains plug features a thermoset resin case carrying floating pins that align to provide an enhanced contact area with the socket connections. The stripped cable ends are secured by specially profiled clamp screws and the cable is both decoupled and clamped by an ingenious die-cast component. The Power-Line cable itself is custom manufactured with 4mm² cross section copper conductors, individual dielectric insulation and a final rubber outer that provides both high levels of inherent mechanical damping, and the correct stiffness to aid dressing on installation. Completing the Power-Line is an IEC inlet plug that continues many of the decoupling and electrical continuity themes of the mains plug. It features floating contacts, combined decoupling and clamping, double wiper contacts and case eddy current suppression.

Super Lumina speaker cables are designed to minimise the effect of external and internal interference sources and preserve maximum signal fidelity. The fundamental cable design consists of several individually-insulated multi-strand silver-plated copper conductors of varying diameters enclosed in a tin-plated copper shield. This is all enclosed in a soft outer jacket which facilitates easy installation whilst minimising microphonic interference. Each signal, return, ground and shield conductor is individually manufactured for its specific function. Each Super Lumina cable is hand-assembled at Naim Audio in Salisbury to the customer’s specification of length and termination. The process is intricate and highly-skilled, following detailed instructions which cover every aspect of the build. Every cable also goes through a proprietary de-stressing process to relieve the materials of the inherent stresses which are a result of the manufacturing process. This means the cables reach optimum performance with minimal run in time.  

Every link in the hi-fi chain is important. Connections between components, including those to the loudspeakers, are crucial to the performance of any audio system. NAC A5 is our multi-strand loudspeaker cable, consisting of two separated 4mm2 conductors. Its design is optimised for use with Naim Audio amplifiers and any loudspeakers by ensuring that its capacitance, inductance and resistance are entirely compatible. We strongly recommend its use, along with our right-angled, twin loudspeaker plugs, which provide a safe, convenient and very effective connection. Even their plating has been the subject of research and development work.   Features Twin separated 4mm2 conductors Design and build optimised for Naim Audio amplifiers Available in black and white

Mu-so Qb 2nd Generation’s speaker grille has had a style update. The standard black grille can be easily swapped for one of 3 new colour options – Olive, Terracotta and Peacock - to best suit your taste and décor.

Mu-so Qb 2nd Generation’s speaker grille has had a style update. The standard black grille can be easily swapped for one of 3 new colour options – Olive, Terracotta and Peacock - to best suit your taste and décor.

Mu-so Qb 2nd Generation’s speaker grille has had a style update. The standard black grille can be easily swapped for one of 3 new colour options – Olive, Terracotta and Peacock - to best suit your taste and décor.

Mu-so 2nd Generation’s speaker grille has had a style update. The standard black grille can be easily swapped for one of 3 new colour options – Olive, Terracotta and Peacock - to best suit your taste and décor.

Mu-so 2nd Generation’s speaker grille has had a style update. The standard black grille can be easily swapped for one of 3 new colour options – Olive, Terracotta and Peacock - to best suit your taste and décor.

Mu-so 2nd Generation’s speaker grille has had a style update. The standard black grille can be easily swapped for one of 3 new colour options – Olive, Terracotta and Peacock - to best suit your taste and décor.

Crafted for pure musical performance, Statement is the pinnacle of Naim Audio engineering knowledge and artistry. The series comprises the NAC S1 preamplifier and NAP S1 mono power amplifiers.  Origins The idea for an entirely new kind of amplifier was first conceived by our engineers over a decade ago and development began in earnest in 2011. The objective was to set a new reference standard in high-end audio and music reproduction. The result is Statement. Three years of relentless questioning, iterative design and a point blank refusal to accept no as an answer. Performance First Engineering Product engineers often begin with what exists already. They might ask how something can work better, or where improvements can be made. With Statement, we started with a blank sheet of paper and a vision: to create the ultimate amplifier. After the initial concept stage the engineering team set aside practical considerations and began to map out the product in free space. This creative freedom was then backed up by 3D computer models which confirmed the optimum position for each component. To accommodate this new layout Statement pioneers a new vertical structure. It was the best way to minimise electromagnetic and mechanical interference and maximise thermal performance. Duality In Design Statement's radically different aesthetic may seem like a departure from Naim Audio tradition but it's the ultimate expression of everything we represent. The imposing monolithic structure with its stark silhouette is offset by the organic sculptural flow of the heat sink and the beautifully lit volume control and central divide. This duality in the design reflects how our pursuit of technical brilliance is always grounded in the abstract human experience of music. If it's the best amplifier in the world in lab tests we’ve only done half a job - it's in the listening room where it really counts. Technology Everything about Statement is a leap forward in technology and design. It's been engineered from the ground up for pure performance. Isolation Statement perfectly represents our philosophy of providing the highest quality power supply, while isolating individual sections to avoid unwanted interference. The NAC S1 and NAP S1 share the same fundamental layout. The noisy power supply is housed in the base and sensitive electronics are nestled above. Each section is divided by an acrylic centre-piece that blocks interaction. Top section electronics are separated further still, with internal chambers isolating individual stages. Dual Power The Statement NAP S1 features a new bridged dual design with zero global feedback. The two stages are physically separated to optimise the amplifier circuit with the delicate voltage stage at the very top of the power amplifier, away from the current stage at the bottom. Each mono power amplifier uses a huge 4000VA transformer to power speakers with precisely 746W (into 8 ohms). Precision engineering also makes sure every single watt is delivered right to where it's needed, when it's needed. After all, power is nothing without purpose. Craft Every component, curve and connection in Statement demanded new levels of engineering and tolerance. Metallurgy The distinctive ‘wave’ heat sinks begin life as a solid billet of untreated aluminium, which is cut to size and machined to achieve the curved profile. The fins are then cut using a five-axis, temperature-controlled, CNC machine. It takes three hours for the finished shape to emerge. Once each piece is individually machined, it is painstakingly hand-polished and quality inspected. Finishing After the inspection process, the metalwork is submerged in baths of cleansing acid and then into a bath of electrolyte fluid containing black ink. A current is passed through it, bonding the ink to the metalwork and creating Naim Audio's signature black finish. It took several months of collaboration between our engineers and suppliers to achieve the finish Statement demanded. Hand-Crafting Statement has been designed and developed using cutting-edge manufacturing technology. But it takes a human touch to get things just right. For example, every sound-critical component is positioned and soldered by hand by our skilled technicians. As with all Naim Audio products final assembly is carried out by hand in Wiltshire, England. NAC S1 Audio Inputs: Analogue Input: 3 X DIN, 3 X RCA, 2 X Balanced Audio Outputs:  Audio Outputs: 1 X Balanced, 2 X Unbalanced (4 pin DIN sockets) Physical: Weight: 61.5kg Dimensions (HxWxD): 940 x 270 x 412mm (width includes stabiliser)

Crafted for pure musical performance, Statement is the pinnacle of Naim Audio engineering knowledge and artistry. The series comprises the NAC S1 preamplifier and NAP S1 mono power amplifiers.  Origins The idea for an entirely new kind of amplifier was first conceived by our engineers over a decade ago and development began in earnest in 2011. The objective was to set a new reference standard in high-end audio and music reproduction. The result is Statement. Three years of relentless questioning, iterative design and a point blank refusal to accept no as an answer. Performance First Engineering Product engineers often begin with what exists already. They might ask how something can work better, or where improvements can be made. With Statement, we started with a blank sheet of paper and a vision: to create the ultimate amplifier. After the initial concept stage the engineering team set aside practical considerations and began to map out the product in free space. This creative freedom was then backed up by 3D computer models which confirmed the optimum position for each component. To accommodate this new layout Statement pioneers a new vertical structure. It was the best way to minimise electromagnetic and mechanical interference and maximise thermal performance. Duality In Design Statement's radically different aesthetic may seem like a departure from Naim Audio tradition but it's the ultimate expression of everything we represent. The imposing monolithic structure with its stark silhouette is offset by the organic sculptural flow of the heat sink and the beautifully lit volume control and central divide. This duality in the design reflects how our pursuit of technical brilliance is always grounded in the abstract human experience of music. If it's the best amplifier in the world in lab tests we’ve only done half a job - it's in the listening room where it really counts. Technology Everything about Statement is a leap forward in technology and design. It's been engineered from the ground up for pure performance. Isolation Statement perfectly represents our philosophy of providing the highest quality power supply, while isolating individual sections to avoid unwanted interference. The NAC S1 and NAP S1 share the same fundamental layout. The noisy power supply is housed in the base and sensitive electronics are nestled above. Each section is divided by an acrylic centre-piece that blocks interaction. Top section electronics are separated further still, with internal chambers isolating individual stages. Dual Power The Statement NAP S1 features a new bridged dual design with zero global feedback. The two stages are physically separated to optimise the amplifier circuit with the delicate voltage stage at the very top of the power amplifier, away from the current stage at the bottom. Each mono power amplifier uses a huge 4000VA transformer to power speakers with precisely 746W (into 8 ohms). Precision engineering also makes sure every single watt is delivered right to where it's needed, when it's needed. After all, power is nothing without purpose. Craft Every component, curve and connection in Statement demanded new levels of engineering and tolerance. Metallurgy The distinctive ‘wave’ heat sinks begin life as a solid billet of untreated aluminium, which is cut to size and machined to achieve the curved profile. The fins are then cut using a five-axis, temperature-controlled, CNC machine. It takes three hours for the finished shape to emerge. Once each piece is individually machined, it is painstakingly hand-polished and quality inspected. Finishing After the inspection process, the metalwork is submerged in baths of cleansing acid and then into a bath of electrolyte fluid containing black ink. A current is passed through it, bonding the ink to the metalwork and creating Naim Audio's signature black finish. It took several months of collaboration between our engineers and suppliers to achieve the finish Statement demanded. Hand-Crafting Statement has been designed and developed using cutting-edge manufacturing technology. But it takes a human touch to get things just right. For example, every sound-critical component is positioned and soldered by hand by our skilled technicians. As with all Naim Audio products final assembly is carried out by hand in Wiltshire, England. NAP S1 Audio Inputs: Analogue Input: 1 x XLR (each) Audio Outputs: Audio Outputs: Binding posts for spade & 4mm banana Power Output: 746W into 8 ohms, 1450W into 4 ohms, 9kW burst power into 1 ohm Physical: Weight: 101kg (each) Dimensions (HxWxD): 940 x 256 x 383mm (each)

Pure musicality with our most advanced streaming platform Our reference network player is quite simply the best source component we’ve ever developed. Drawing on decades of digital and analogue engineering experience, the ND 555 marries our innovative new streaming platform with classic Naim analogue technology. It features a 40-bit SHARC processor with advanced signal processing, a suspended brass sub-chassis to isolate sound-critical circuits from vibrations and the best external power supply we’ve ever made. Whether you’re listening to Bonham’s solid groove or Coltrane’s dizzying scales, the ND 555 lets the music flow with astonishing ease and uniquely engaging musicality. Partnered with Statement or 500 series amplification, we believe the ND 555 is as close to live music as it gets. Experience Breath-Taking Depth of Sound ND 555 offers numerous ways to listen to your music with clarity and precision: Chromecast built-in: Stream audio from hundreds of supported smartphone or tablet apps such as Deezer, Qobuz, Plex, TuneIn, Soundcloud and Pandora (192kHz) Apple AirPlay: Stream music from your iOS device or from iTunes and Apple Music. TIDAL: The lossless streaming service is integrated for ease of use and audiophile-quality sound. Benefit from a free 90-day trial of the HiFi-tier service (terms and conditions apply). Spotify® Connect: Native support for Spotify lets you play millions of songs from the world’s most popular streaming service. Start playback from a portable device and listen on your Naim network player, using the Spotify app as a remote. Bluetooth AptX HD: Pair your Bluetooth device and instantly play back your music in high definition with the best Bluetooth on offer today. Internet Radio: Explore thousands of internet radio stations from around the world and save your favourites as presets for easy access. UPnP (Universal Plug and Play): Stream music from a PC, Mac or network-attached storage with a stunning resolution of up to 32 bits/384 kHz or DSD128. Digital Input: Boost audio from digital sources such as TVs, set top boxes or games consoles. Wired IR RC5 Output: Thanks to RC5 system integration, you can control your Naim amplifier directly from the Naim app on a phone or tablet. Zigbee Control: A bi-directional, Zigbee®-compatible remote control puts essential functions right at your fingertips. In contrast to infra-red remotes, it requires no line of sight! USB: Play music from a compatible USB-connected device or hard disk (1.6A charge). Multiroom: Play music from multiple Naim streaming source at the same time. Simply link, for example, the network player in your main system to the Uniti in your office and the Mu-so in your kitchen using the intuitive Naim app. Roon-Ready: Roon completely transforms the experience of browsing and playing music: rich, beautifully laid-out metadata is hyperlinked to build a surfable, searchable magazine about your music collection. Qobuz: Qobuz allows you to stream the most comprehensive CD-quality music catalogue currently available and the largest selection of albums in true high-resolution studio quality directly to your Naim music streamer. A rich audio heritage  The ND 555 is the result of over four decades of audio engineering. From our state-of-the-art streaming module to powerful, natural-sounding audio stages – every element of this network player is built on our design DNA, giving it that distinctive, captivating Naim sound. The ND 555 development process also helped us step foot into new technologies: for the first time, we’ve added low-voltage differential signalling (LVDS) to a premium Naim player. We chose LVDS because it minimises timing errors due to its fast speed and it minimises radiation thanks to its low noise. Expert craftsmanship  The ND 555 is bristling with innovative technology from input to output. The streaming section uses the latest Naim network card featuring low-noise, high-speed LVDS to route the digital audio signal. The higher speed is capable of decoding most HD audio formats at up to 32 bits/384 kHz or DSD128. Rather than the source acting as the digital timing master, our new streaming board turns things around and allows our DAC clock to control the flow of audio data. The data is integer-over-sampled in a SHARC DSP to an incredible 40-bit accuracy and fed into the Burr-Brown® PCM1704, a true R2R ladder DAC valued for its exceptional sound quality. Naim’s renowned DR regulator technology, as used in our range of amplifiers and power supplies, makes its first appearance in a network player, providing ultra-pure DC voltage to the sensitive audio circuitry in the ND 555. The analogue stages use only high-grade through-hole components and are suspended on sprung sub-chassis with heavy brass plates to minimise the effects of microphony. Absolute control  There are several ways to control ND 555. The Naim App for iOS and Android gives you complete control over individual or multiple Naim products. You can access all of your music including radio pre-sets, streaming services and playlists, sync several Naim players for multiroom playback or explore artist discographies and biographies. The app also controls our Uniti Core music server (so there’s no need for two separate apps) and allows you to update your system wirelessly with a single tap. For those who prefer a more tactile experience, a premium metal Zigbee® remote control is supplied. It requires no line of sight to the player, so you can take control whatever direction you’re facing. The front panel features a 5” colour display presenting album artwork as well as track information in crisp detail, and there are keys for most commonly used functions including standby and input selection.   Specifications: Dimensions and Weight: 87mm x 432mm x 314mm (H x W x D) Connectivity: Audio Inputs 2 x optical TOSLink (up to 24bit/96kHz) 1 x coaxial RCA (up to 24bit/192kHz, DoP 64Fs) 1 x coaxial BNC (up to 24bit/192kHz, DoP 64Fs)  Audio Outputs 1 x RCA pair 1 x 5-pin DIN Upgradeable Performance: The ND 555 can be complemented with a second 555 PS DR power supply and/or a Super Lumina interconnect cable to boost audio performance.

As the debut product in our reference 500 Series range, the NAP 500 is a monumental expression of Naim Audio amplifier technology. Its design was honed over six years of collaborative work with suppliers of specialist parts and each product takes days of dedicated assembly by our most skilled technicians in Salisbury. It’s this eye for detail, alongside its remarkable power, that allows the NAP 500 to bring your music into breath-taking focus. New Statement Technology  Our flagship Statement amplification system was ten years in the making. The research and development project drew on all of our knowledge and expertise, yielding several breakthroughs in technology. We’ve recently introduced two new technologies from the Statement project to our core range of power amplifiers.  The NAP 500 now features the new NA009 transistors first introduced in Statement. In development for over a year, this key component was created in partnership with a specialist semi-conductor manufacturer to achieve the best possible sound quality. The 500 also includes the high power Naim Audio DR (Discrete Regulator) technology used in Statement to provide the smooth, stable power supply we know is critical for the audio electronics to make music come to life.  These two new technologies, combined with other small improvements to layout and componentry, mean the NAP 500 DR can produce even more of the fundamental musical pace, rhythm and timing that made the originals so popular with music lovers.  Features: 140W per channel output into 8 ohms; capable of prolonged output into 2 ohms with no discernible impact on performance Bridged power amplifier configuration for maximised open and closed-loop speed, with ten stages of local regulation per channel Two-box configuration with 500 PS power supply for optimum rejection of electromagnetic interference 1,100VA toroidal transformer provides 12 raw DC supplies for the power amplifier  25kg brushed, black-anodised chassis with distinctive heatsink plus variable speed intelligent fan system for discreet extra cooling if required Technology & Craft The NAP 500 delivers 140W per channel into 8 ohms and is capable of prolonged output into 2 ohms with no discernible impact to performance. Its two box configuration is classic Naim Audio, with the power supply completely removed to the separate 500 PS power supply for ultimate performance. Each channel of the NAP 500 includes ten stages of local regulation. To reduce interference from the mains supply further, the transformer and first stages of the power supply are in a separate enclosure, the 500 PS, which provides twelve raw D.C. supplies for the power amplifier. A bridged configuration allow for maximised open and closed loop speed, less intrusive protection circuitry and reduced interaction between input and output signals as the very high drive currents to the loudspeaker do not flow through the system earth. The NAP 500 also features the new output transistor, the NA009, specifically designed for the purpose through months of collaborative work with a specialist supplier. The circuit topology has been developed to maximise bandwidth and reduce distortion and power supply dependency. Also, special attention has been paid to reducing thermally-induced noise, an especially important consideration in power amplifiers. Audio Inputs: Input Impedance: 18kΩ Analogue Input: 2 x XLR Audio Outputs: Minimum Load Impedance: 2Ω Frequency Response: -3dB at 1.5Hz and 100kHz Gain: +30dB Finish: Case: Brushed and black anodised Front: Brushed and black anodised Physical: Shipping Weight: 28.2 kg Shipping Dimensions: 270 x 570 x 520 mm Weight: 25 kg Dimensions (HxWxD): 160 x 432 x 374 mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Power Supply Options: 500PS Speaker Outputs: Power Output: 140W/channel, 8Ω Transient: 700VA Speaker Outputs: L & R, 4mm “banana” sockets Supplied with: Supplied with: 500PS, Power-Line, Burndy

Not everyone sees hi-fi as we do. For us, a smooth, stable, low-noise power supply isn’t just desirable: it’s fundamental to proper hi-fi performance. Nowhere is that belief more clearly exemplified than in our reference 555 PS DR, the best power supply in our portfolio. Originally designed to partner our world-class CD555 CD player, the 555 PS can also be used with our NDS and NDX network players, our HDX hard disk player/ server and our DAC digital to analogue converter as well as the CDX2 CD player. Whatever Naim Audio product it partners, the 555 PS DR will improve every aspect of your favourite music. Voices and instruments become clearer and more natural. Perceived dynamic range increases too, while timing – music’s fundamental sense of rhythm and accuracy – snaps into even greater focus. Features: Seven regulated supply voltages, including a separate supply for the CD555 clock circuit Low-resonance case with isolating feet Massive transformer, 40 percent larger than that fitted to the XPS Supplied with Power-Line mains cable as standard All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s best-ever standards of stable, low-noise power Technology & Craft The 555 PS benefits from both our decades of experience and our relentless pursuit of superior sound quality. Its massive transformer, some 40 percent larger than that fitted to our XPS power supply, features five separate windings outputting to seven regulated supply voltages, including an output specifically intended for use with the clock circuitry of our CD555. The 555 PS was updated in 2012 as a result of a two year project to develop a new discrete regulator (DR) for Naim Audio power supplies. The new Naim Audio DR now features, alongside improvements to the wire routing, mechanical decoupling and internal layout. These enhancements, developed through intensive listening tests, significantly raise performance and make music even more communicative and enjoyable. Finish: Case: Brushed and black anodised Front: Brushed and black anodised Outputs: Power Outputs: ± 22V, ± 10V, 12V, 2 x 15V Physical: Shipping Dimensions: 240 x 590 x 500 mm Weight: 15.7 kg Dimensions (HxWxD): 87 x 432 x 314 mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Supplied with: Supplied with: Power-Line