PMC

The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.

The PMC6 is packed with innovation and providing the same sonic signature as our renowned larger monitors, it’s ideal for smaller control rooms or for use in larger immersive systems, where its astounding resolution allows critical mix decisions to be made with absolute confidence.With 20mm of excursion, the bespoke 6-inch bass driver is designed specifically to integrate with our latest ATL™ bass-loading and Laminair™ airflow technologies. The combination outperforms most 8-inch monitors, offering unparalleled bass extension, headroom, dynamics, and low distortion at all levels. The high end is courtesy of a one-inch precision-built fabric soft-dome tweeter, with a shallow waveguide that creates wide, tonally consistent dispersion and rock-solid imaging. Both the bass and treble drivers are precisely and individually controlled by a pair of 200W ultra-low-distortion, high-damping-factor Class-D amplifiers.

The MB2S XBD is a development of the successful MB2S with increased dynamics and LF performance. The addition of the XBD cabinet containing a second precision 12” Radial™ driver increases the LF headroom by 3dB below 380Hz that allows a larger room to be driven to greater effect. In a surround configuration the added headroom of the XBD allows the .1 surround effects channel to be handled with ease, avoiding the installation of further sub units. The MB2 XBD features in many quality conscious facilities including Studio Hilversum – The Netherlands. The 32 element, 4th order passive crossovers are housed in external enclosures which can be mounted to the rear of the XBD cabinets for improved fidelity. An ideal monitor for all music recording, mastering and post production in either stereo or surround configuration. Technology DEEPER, CLEARER, CLEANER BASS & MORE Greater detail & more natural A full, rich sound at any volume level Deeper bass from a smaller cabinet The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world. ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes. Specifications: Available Finishes: Neo Black Crossover Frequency: 380Hz & 3.8kHz Dimensions: H 1740mm 68.50" W 380mm 14.96" D 535mm 21.06" Drive Units: LF x 2 310mm PMC Radial™ driver / MF 75mm PMC fabric dome / HF 27mm PMC fabric soft dome Effective ATL™ Length: 2 x 3m 10ft Frequency Response: 20Hz - 25kHz Impedance: 4 Ohm nominal Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-amp) sensitivity: 91dB 1W 1m Weight: 88kgs 193.6lbs Amplifier Power per Channel:HF 120W / MF 120W / LF 600W / LF 600W

The MB2S is perfect for mid sized control rooms either soffit mounted or on its custom studio stands. The MB2S allows higher SPL’s without distortion and loss of definition normally associated with a device of its size. The distinctive MB2S includes the PMC 75 mid driver that has taken the limits of soft dome design and construction to its ultimate conclusion. The Radial™ low frequency driver allows massive controlled excursions and avoids the effects of power compression, by cooling via its cast alloy exo-skeleton and new rear vented magnet. As with all PMC models there is matching low profile centre channels (MB2S-C) and subwoofers for use in surround configuration (XB2S). You can find the MB2S in the following studios Advantage Audio. Technology DEEPER, CLEARER, CLEANER BASS & MORE Greater detail & more natural A full, rich sound at any volume level Deeper bass from a smaller cabinet The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world. ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes. Specifications: Available Finishes: Neo Black Crossover Frequency: 380Hz & 3.8kHz Dimensions: H 870mm 34.25" W 380mm 14.96" D 535mm 21.06" Drive Units: LF 310mm PMC Radial™ driver / MF 75mm PMC fabric dome / HF 27mm fabric soft dome Effective ATL™ Length: 3m 10ft Frequency Response: 20Hz - 25kHz Impedance: 8 Ohm Nominal Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp) sensitivity: 91dB 1W 1m Weight: 49kg 108lbs

The IB2S is based on the hugely successful IB1S with one major change to the driver compliment. The addition of the PMC 75 large soft dome mid range unit increases the definition and clarity to the level of the larger monitors in the range with no increase in cabinet size. Since the launch of the IB2S it has featured worldwide with high profile clients such as Ronald Prent – Galaxy, Kraftwerk – Kling Klang, Teldex – Berlin, JVC – Japan and the list goes on. Its potent performance and unsurpassed definition across the audio spectrum make it the ideal reference monitor for any stereo or surround project. Technology DEEPER, CLEARER, CLEANER BASS & MORE Greater detail & more natural A full, rich sound at any volume level Deeper bass from a smaller cabinet The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world. ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes. Specifications: Available Finishes: Neo Black Crossover Frequency: 380Hz & 3.8kHz Dimensions: H 740mm 29.1" W 330mm 13.0" D 465mm 18.3" Drive Units:LF 250mm PMC Carbon Fibre/Nomex™ piston driver / MF 75mm PMC fabric dome / HF 27mm fabric soft dome Effective ATL™ Length: 2.4m 8ft Frequency Response: 25Hz-25kHz Impedance: 4 Ohm nominal Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp) sensitivity: 89dB 1W 1m Weight: 41kg 90.2lbs

The IB1S is an extremely flexible 3-way monitor, which has found its home in the most varied of environments. Commonly seen in Mastering, Broadcast and Postproduction in either stereo or surround when partnered with its dedicated centre channel and SB100 sub bass system. Its huge popularity in Hollywood film scoring and postproduction is assisted by the option of ‘Film filters’. This gives 2 positions of HF roll off: 1.5dB and 3dB per Oct and Flat position. The IB1S features wide dispersion soft domed fabric mid and high frequency units and the PMC 10" carbon fibre and Nomex™ flat piston low frequency driver. This flat patented driver increases dynamic handling and eliminates distortion that may occur due to cone break up. You can find the IB1S in the following studios: BBC Technologies Headquarters. Technology DEEPER, CLEARER, CLEANER BASS & MORE Greater detail & more natural A full, rich sound at any volume level Deeper bass from a smaller cabinet The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world. ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes. Specifications: Available Finishes: Neo Black Crossover Frequency: 380Hz & 3.8kHz Dimensions: H 740mm 29.1" W 330mm 13.0" D 465mm 18.3" Drive Units: LF 250mm PMC Carbon Fibre /Nomex™ piston driver / MF 75mm doped fabric / HF 27mm fabric soft dome Effective ATL™ Length: 2.4m 8ft Frequency Response: 25Hz-25kHz Impedance: 4 Ohm nominal Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp) sensitivity: 89dB 1W 1m Weight: 36kg 79.2lbs

The three-way IB2S-AII offers discerning users all the attributes of PMC’s large ATL™ reference active monitors but in a more compact form. They are ideal for high-end reference monitoring in both stereo and surround formats. The DSP-controlled, Class-D powered cabinets make use of PMC’s ATL™ (Advanced Transmission Line) bass-loading technology, providing a smoothly controlled, high-resolution low-frequency response. Each cabinet features PMC’s hand-built preparatory drivers - the 10-inch carbon-fibre/Nomex™ piston, 75mm fabricdome mid, and the 34mm soft-dome tweeter. The power is supplied by PMC’s ultra-low distortion devices that are conveniently rack mountable, providing HF 275W, MF 550W and LF 1200W of acoustically transparent power. This single cabinet monitor features user-adjustable HF and LF shelving filters, ±8dB input level trim, and an AES3 digital input, as standard. The input sensitivity of the balanced analogue inputs can also be adjusted from +4dB to +16dB. In addition, the EQ, level trims and analogue/digital input  election settings can be adjusted from a distance using an RJ45-connected remote, which is supplied as standard. Options: Dedicated vertical and horizontal centre channel versions Tailor made, high mass, 33” Studio Frame Stands Specifications: Available Finishes: Studio black Type: 3-way ATL™ active reference monitor Analogue & digital (up 96kHz) inputs Maximum SPL: 125dB Three personal balance presets for multiple users Crossover Frequency: 380Hz & 3.8kHz Dimensions:H 745mm (29.3 inches) W 330mm (12.9 inches) D 564mm (22.2 inches) Drive Units: LF 250mm/ 10” PMC Carbon Fibre/ Nomex™ piston driver,MF PMC hand-built 75mm soft-dome driver,HF PMC 34mm soft-dome tweeter with acoustic radiator Effective ATL™ Length: 2.4m (8ft) Frequency Response: 25Hz - 25kHz Input Connectors: Balanced Analogue Main Input/ Through Sensitivity: Adjustable +4dB to +16dBu Weight: 46.5kg (102.5lbs) each Amplifier Power per Channel: LF 1 x 1200Wrms, MF 1 x 550Wrms, HF 1 x 275Wrms

The result6 provides an introduction to PMC and the huge benefits of ATL™ technology, the proprietary bass-loading system at the heart of all our designs. This active two-way reference monitor offers all the attributes for which PMC is world-renowned: high resolution and detail, accurate, extended bass, consistent tonal balance at all levels, and wide dispersion and sweet spot. With an emphasis on elegant simplicity, this is a compact nearfield that allows you to work faster and more confidently. There are no overly complex DSP-based user options or room profiles; instead, the result6 achieves its characteristically neutral, dependable PMC reference sound solely on the strength of its engineering. Honed to the fundamentals of our design philosophy, it’s devoted to getting you the best sounding results in the shortest possible time.