Pro-Ject

Aluminium tonearm, computer connection & 3 speeds!The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.The new Debut RecordMaster II has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables with all speeds is growing fast! It comes with improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE), ultra precision frequency DC-driven AC generator for ultimate speed stability. Ultimate convenience is achieved, because of electronic speed change („Speed Box“) and the possibility of playing 78rpm. A simple exchange of stylus to OM78 (not included) and a drive belt turnover to larger diameter of pulley is required, that‘s all!Because Debut RecordMaster II comes with pre-mounted cartridge and built-in switchable phono preamplifier with USB output, connection to both line-level input of your hifi system and recording of vinyl to PC/Mac easily can be done simultaneously! Debut RecordMaster is offered in high-gloss black, red and walnut matt.

Aluminium tonearm, computer connection & 3 speeds!The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.The new Debut RecordMaster II has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables with all speeds is growing fast! It comes with improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE), ultra precision frequency DC-driven AC generator for ultimate speed stability. Ultimate convenience is achieved, because of electronic speed change („Speed Box“) and the possibility of playing 78rpm. A simple exchange of stylus to OM78 (not included) and a drive belt turnover to larger diameter of pulley is required, that‘s all!Because Debut RecordMaster II comes with pre-mounted cartridge and built-in switchable phono preamplifier with USB output, connection to both line-level input of your hifi system and recording of vinyl to PC/Mac easily can be done simultaneously! Debut RecordMaster is offered in high-gloss black, red and walnut matt.

Aluminium tonearm, computer connection & 3 speeds!The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.The new Debut RecordMaster II has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables with all speeds is growing fast! It comes with improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE), ultra precision frequency DC-driven AC generator for ultimate speed stability. Ultimate convenience is achieved, because of electronic speed change („Speed Box“) and the possibility of playing 78rpm. A simple exchange of stylus to OM78 (not included) and a drive belt turnover to larger diameter of pulley is required, that‘s all!Because Debut RecordMaster II comes with pre-mounted cartridge and built-in switchable phono preamplifier with USB output, connection to both line-level input of your hifi system and recording of vinyl to PC/Mac easily can be done simultaneously! Debut RecordMaster is offered in high-gloss black, red and walnut matt.

Aluminium tonearm, computer connection & 3 speeds!The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.The new Debut RecordMaster II has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables with all speeds is growing fast! It comes with improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE), ultra precision frequency DC-driven AC generator for ultimate speed stability. Ultimate convenience is achieved, because of electronic speed change („Speed Box“) and the possibility of playing 78rpm. A simple exchange of stylus to OM78 (not included) and a drive belt turnover to larger diameter of pulley is required, that‘s all!Because Debut RecordMaster II comes with pre-mounted cartridge and built-in switchable phono preamplifier with USB output, connection to both line-level input of your hifi system and recording of vinyl to PC/Mac easily can be done simultaneously! Debut RecordMaster is offered in high-gloss black, red and walnut matt.

Our turntables demand conscious music listening. The Debut PRO S takes this philosophy to the extreme. We finished all parts except for the polished spindle in matte black. The manual controls invite the listener to interact with the turntable: turn it on, place the record on the platter, move and lower the tonearm. The musical reward follows the tactile experience. No unnecessary switches, LEDs, or labeling distract from what is essential.A milestone for the next decadesThe Debut PRO S brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound. The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO S to its modern simple, elegant and unprecedented design. By loading the video, you agree to YouTube’s privacy policy.Deeply drivenThe electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records.A new platter – a deeper dishThe die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing also MC cartridges to work properly.The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. The included Record Puck E provides an extra level of damping and stability.Azimuth & VTA AdjustmentThe newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.PRO FeaturesPick it S2 C - Unheard precision & dynamicsThe perfect combination of components is the key to achieve the great sound of the Pick it PRO S.Alu Sub-Platter - Sustainable componentsThe diamond cut aluminium sub-platter can be machined to much improved and higher tolerances and will be a substantial upgrade to regular sub-platters.10" S-Shape - New tonearm designThis super stiff and uniquely dampened aluminium tonearm ensures perfect tracking of the record groove.VTA & Azimuth - Fully adjustableThe Debut PRO S comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it.33/45/78 RPM - High precision motor controlThe playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch.Bearing block - Complete new designThe precision CNC milled tonearm bearing parts are completely new and designed just for the PRO.Special Platter - TPE damped & anti magneticThe heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter.Metal Feet - Damped & height adjustableThe three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

The Debut EVO 2 focuses on the core aspects that make a turntable sound great. Technically correct design – expert craftsmanship – handmade in the EU.This turntable is built to last you a lifetime!The new Pick it MM EVO cartridge completes the Debut EVO 2 in all respects. It doesn‘t only complement the lightweight tonearm sound-wise, it also looks stunning on the turntable. Our phono specialists again teamed up with the cartridge experts at Ortofon from Denmark to work on this new cartridge. The cartridge is made from a unique combination of technologies. One of which is Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which is comparable to MC cartridges.The gold plated RCA sockets on the Debut EVO 2 will always provide the best connection. The included high Connect it Phono E RCA uses quality core materials like a copper conductor for a signal transmission without losses. This cable is a semi-symmetrical type, which means that the shielding is only connected on one end. Therefore, the yellow marked side should always be connected to the receiving end.Due to the RCA output sockets you can always change and upgrade the phono cable. This allows you to upgrade the Debut EVO 2 to our True Balanced technology. To use our True Balanced Connection, your Debut EVO 2 needs to be equipped with an MC cartridge or Pick it PRO Balanced.TPE damped & anti -magnetic - The heavy aluminium platter uses a TPE ring inside to dampen unwanted resonances.Bearing Block - The massive precise CNC milled alu tonearm bearing block absorbs all unwanted resonances coming from the cartridge.Pick it MM EVO - Lively and robust sound - The new Pick it MM EVO cartridge tops off the new Debut EVO 2.Counterweight - We have added a TPE damping ring to the counterweight as on our high-end players.Adaptive skating force - As the skating force varies between the inner and outer grooves of the vinyl record, our anti-skating mechanism adjusts accordingly.Carbon fiber - Super stiff and lightweight - The new Debut EVO 2 features the a 8,6‘‘ one piece carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage.Premium Bearing - Smooth movement- The precise CNC milled aluminium bearing offers very low friction and best stability.Quality Motor - Sophisticated suspension- Our high quality AC motor is mounted into a porper suspension system which consistently reduces vibrations.Clean Power - DC/AC power generator- The power generator creates a completely clean new sine wave for the motor. This guarantees very clean power which results in enhanced speed stability.Belt Drive - Precision belt - The belt decouples the motor from the big sub platter. This prevents motor vibrations to travel to the needle.33 / 45 RPM - Electronic speed change - The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button.The heavy 1,7 kg die-cast aluminum platter gets reworked and precision balanced in an extra step to obtain a perfect platter. The heavy aluminum platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and thus minimize wow and flutter. The Debut EVO 2 platter is anti-magnetic, which allows you to use MC cartridges and upgrade to our True Balanced Connection technology. Our separately available Record Puck E provides an extra level of damping and stability, so it is the perfect add-on for your Debut EVO 2.The platter features a notch for the record label and together with our Record Puck E (available separately) the puck’s weight will press your record tightly against the platter.

This Image test record is an outstanding adjustment tool, which includes measurements, that everyone will understand and is able to perform. No unnecessary High End voodoo testing! The record only contains essential measurements, that will make your cartridge/tonearm/turntable combo sound best.Perfectly manufactured LP, which marks state-of-the-art reference quality status, referring to mastering tolerances of all available anaologue test records! Comes with german and english instruction.

Align it DS2 is one of the easiest yet most effective alignment tools available. With it you can adjust and align your cartridges with ease. Just put Align it DS2 on your platter and place the arm and cartridge accordingly on the desired protractor. With three available protractors on Align it DS2 you‘re able to adjust all your cartridges.

Linear power supply your turnable & phono preamp. Cleanest power for your phono setup! The power supply is a very important part of the audio path and significantly contributes to the sonic quality of an audio product.With the new Power Box RS2 Phono you can connect both, your turntable and phono preamp, and benefit from the perfect power contribution. The new Power Box is compatible with all of our Phono Boxes and every 15V DC Pro-Ject turntable. A linear power supply consists of a massive toroidal transformer, which avoids penetration of interferences from mains into the audio component. The built-in transformer has a much higher power reserve compared to the standard power adapter. It has very low output impedance and in combination with large filtration capability it can easily manage all power needs. Sound staging, darkness of silent backgrounds and small detail resolution will improve strongly and contribute to a far better overall performance of each component. Power Box RS2 Phono is made in Europe and available in a black or silver full aluminium housing.Premium Connect it Power cables (1m) included!

The Phono Box DS3 B model offers some of the high-end features of the Phono Box RS2 at an affordable price and trusted Pro-Ject quality. One of those is our new True Balanced Connection.The Phono Box DS3 B employs a steel chassis enveloped by aluminium panels. This construction offers very high rigidity and isolation against interferences, which is essential for the new technology inside. Magnetic wooden side panels are available separately as add-ons. You can connect up to two turntables simultaneously – all parameters for each input get stored in the memory. Perfectly match the Phono Box DS3 B to a wide variety of cartridges. Load impedance can be set continuously via a potentiometer, a system invented by Pro-Ject Audio Systems, to adjust the impedance during playback and assess the impact of different loading options in real-time. No other manufacturer implements this feature as elegantly!Cartridges are balanced signal transducers by nature! Due to the internal wiring of MM cartridges, you'll need a MC cartridge to access the entirety of that balanced signal. Together with our new True Balanced Connection cables you'll be able to access high-end features that were previously only available on the most expensive phono stages. And the best: any Pro-Ject turntable with RCA, miniXLR or 5P output can do it!A TECHNICAL DEEP DIVEThe Phono Box DS3 B incorporates a true, fully balanced gain stage design. Whether you're using a single-ended RCA or balanced connection, both times the fully symmetrical gain stage can optimize the signal-to-noise ratios, feeding the fully passive and discrete RIAA equalization stage with the cleanest signal to work its magic on. Entirely split passive equalization allows for better impedance matching and lower deviation from the ideal RIAA curve. The Phono Box DS3 B uses fully discrete audio circuitry. A discrete circuit is composed of disparate, individual electronic components, also called discrete components. Years of experience have proven that even the best Op-Amps do not come close to the neutral, natural, dynamic, and vivid presentations of discrete circuit.TRUE BALANCED CONNECTIONThe symmetrical design is the fundamental standout feature! Connect your turntable via the 5-pin mini XLR cable or standard XLR cables and enjoy the benefits of our new True Balanced Connection. A truly balanced gain stage can extract the final musical information, effectively filtering out any noise from interferences stemming from our noisy, modern homes (household appliances, wifi & Bluetooth, power cables, audio amplifiers).

The XA B balanced acrylic turntable is a gorgeous, high-performance edition to the X Series. It implements a 10″ one-piece aluminum tonearm with a balanced 5-pin DIN output. Also utilizing a balanced balanced MM phono cartridge (the first of its kind!) it brings you one step closer to balanced operation. You need only a DIN > Mini XLR or DIN to XLR cable with which to connect the turntable to any of our Phono Box S3 B, Phono Box DS3 B, Tube Box DS3 B, or Phono Box RS2 balanced phono preamps.A Clearer PictureFor over 30 years we’ve designed & built turntables that focus on sound quality over convenience-oriented features. Along the way we’ve experimented with materials that vary in their resonance properties, and acrylic has remained . Our first ever acrylic turntable (the 6.9Perspective) was a huge success. 6PerspeX variants have been around for 15+ years too, not to mention a host of 2Xperience variants in acrylic. Needless to say, the limited run of our Perspective Final Edition turntable sold out swiftly as well. We take pride in how these turntables take advantage of both the aesthetic & sonic virtues of acrylic in hi-fi, but using acrylic in manufacturing not as easy as you might think. True, it’s anti-resonant, but the rest of the turntable too must lend sonic value to the equation. Measurement & critical listening reveal that acrylic can actually over-damp sonics if it’s not used thoughtfully. XA B uses an aluminum tonearm & platter, the Pick it PRO Balanced cartridge & purpose-selected isolation feet to render music in a lively, dynamic & detail-rich manner… an experience that becomes doubly immersive when you decide to take the plunge into the world of balanced phono.Premium 10″ TonearmThe XA B turntable features a premium 10“ one-piece aluminum armtube. The single-piece tube heightens rigidity while the 10″ length widens the tonearm’s arc, reducing tracing error. The low-friction 4-pinpoint cardanic bearing assembly guarantees precise, stable & accurate tracking. We’ve selected the aluminum armtube over carbon fiber for its sonic merits when paired with the resonant frequency of the acrylic plinth. The tonearm also offers audiophiles full control over their adjustment parameters. One can fine-tune not only tracking force & anti-skate, but also VTA & azimuth if needed. Listeners with cartridge-mounting skills are encouraged to try various cartridges and/or record mats to achieve their desired sonics!Our classic anti-skating system (adaptive anti-skating) changes with the skating force, which varies across a record side as groove conditions change. The TPE-damped counterweight significantly reduces unwanted armtube resonance. We use high-precision stainless steel cardanic tonearm bearings, meaning there’s minimal friction as the tonearm moves and absolutely no ‘play’ (or wiggle) in the bearing structure. This allows the stylus & cartridge to do their jobs unimpeded.True BalancedThe Pro-Ject Pick it PRO Balanced cartridge allows for “True Balanced” signal transmission. A revised version of the Pick it PRO, we re-route the grounding so that it sends a symmetrical signal. The big advantage of a balanced connection is its ability to remove accrued noise and interference from the transmission line (not to mention +6dB gain!). In short, you get more music & less noise – the improvement is not subtle.Our True Balanced cable range offers several options for connecting your XA B to our Phono Box S3 B, Phono Box DS3 B, Tube Box DS3 B or Phono Box RS2 phono stages. Any phono preamp with mini XLR or XLR inputs will do the trick! With XA B’s DIN output, you’d require either an DIN > mini XLR or DIN > XLR cable.High-Quality DIN > RCA CableCables cannot add any information back to a given signal, rather, they’re responsible for allowing as much musical information as possible through to the receiving device. This is why we include our Connect it Phono E 5P > RCA cable. Optimized for phono applications, we’ve implemented quality metals & careful configuration to ensure lossless signal transmission.TPE-Damped Die-Cast PlatterThe 1.7kg (3.75lbs) die-cast aluminum platter is precision-balanced with additional machining after casting. This facilitates perfect platter rotation while playing records. The heavy aluminum platter also adds a TPE (thermoplastic elastomer) damping ring & corresponding cutout on the underside, muting any resonance created by the metal record platter and contributing to the flywheel effect.Damped, Height-Adjustable FeetThe XA B stands on three damped & height-adjustable feet for excellent isolation. By using 3 feet we are able to increase stability on uneven surfaces for optimal leveling – a critical setup parameter in terms of maximizing the performance of a tonearm & cartridge.Sophisticated DC/AC GeneratorOur turntables use switch-mode power supplies for good reason. They take the unrefined AC power from your wall and convert it to DC. That DC power is then fed to DC/AC generator within the turntable, which in turn powers the AC motor. The advantage is that a completely new sine wave is created by the generator, fully decoupling your turntable from the dirty AC power coming from your outlet. This amounts to steady power being fed to the motor thereby enhancing speed stability.Two Upgrades in One BoxClean & stable power is critical for phono setups. The included power supply is a great starting point but you can take it a step further. Power Box S3 Phono provides power for the Debut PRO B (15V) as well as your Pro-Ject phono stage (18V). Its two outputs are specifically engineered to power Pro-Ject turntables and phono preamps simultaneously. The sophisticated DC filtration can have a dramatic impact on overall sound quality. In addition to the sonic improvements, Power Box S3 Phono also offers users a cleaner cable solution (only one wall-wart needed for the PSU).

THE NEXT GENERATION MADE IN EUROPEΤΟ ΝΕΟ CD ​​BOX S3Το CD Box S3 είναι το πρώτο προϊόν της νέας σειράς S3.Σε αντίθεση με τις συσκευές αναπαραγωγής DVD ή Blu-ray Disc, μια καθαρή συσκευή αναπαραγωγής CD είναι συχνά καλύτερη στην αναπαραγωγή στερεοφωνικών CD.Η μονάδα στο CD Box S3 επιτρέπει την αναπαραγωγή CD με ακρίβεια 1:1 bit. Το νέο τσιπ DAC παρέχει την καλύτερη μετατροπή από ψηφιακό σε αναλογικό με λίγο βάθος και ρυθμό δειγματοληψίας έως 32 bit/384 kHz. Ο μηχανισμός τραβάει ομαλά το CD και μετά από λίγα δευτερόλεπτα είναι έτοιμο για αναπαραγωγή.ΝΕΟΣ ΣΧΕΔΙΑΣΜΟΣΗ Pro-Ject Audio Systems όχι μόνο επεξεργάστηκε το σχέδιο του κυκλώματος, αλλά και η θήκη έχει αλλάξει σημαντικά και το CD Box S3 παρουσιάζει το εντελώς νέο μέγεθος S3.Εκτός από τη νέα όμορφη θήκη πλήρους αλουμινίου, διαθέτει επίσης οθόνη 1,54" με λειτουργία αναστροφής χρώματος.

CD BOX DS3 - A HIGH END CD PLAYERΤο CD Box DS3 παρουσιάζει την εντελώς νέα σειρά DS3.Η Pro-Ject Audio επέλεξε τα καλύτερα χαρακτηριστικά των προκατόχων του και πρόσθεσε το Texas Instruments PCM1796 DAC για να σας παρέχει το τέλειο CD player με όλα τα χαρακτηριστικά που πραγματικά χρειάζεστε.Ελέγχετε εύκολα το CD player με τα κουμπιά στο μπροστινό μέρος ή με το παρεχόμενο τηλεχειριστήριο και την οθόνη υψηλής αντίθεσης dot-matrix σας δείχνει όλες τις σχετικές πληροφορίες που χρειάζεστε για να απολαύσετε τα αγαπημένα σας CD.ΑΚΑΜΠΤΟ ΠΕΡΙΒΛΗΜΑ ΑΠΟ ΑΛΟΥΜΙΝΙΟΤα τυπικά περιβλήματα από λαμαρίνα δεν είναι ανθεκτικά στη στρέψη και δεν είναι αρκετά μηχανικά ακριβή για να τοποθετήσουν μια ευαίσθητη μονάδα CD όπου η θέση λέιζερ πρέπει να είναι σωστή όλη την ώρα. Το τεράστιο αλουμινένιο σασί μας παρέχει την καλύτερη βάση για τη μονάδα CD και ο σερβομηχανισμός Blue Tiger CD-80 που αναπτύχθηκε από τη Stream Unlimited είναι ο πιο προηγμένος στην αγορά.

High-precision cartridge alignment tool with super-fast workflowCartridge alignment with easy, fast and accurate workflowAlign it PRO gives you access a totally unique and effective workflow that makes aligning cartridges incredibly fast and efficient.You can set the Align it PRO up for the exact length of your tonearm and fix it to the center of your tonearm bearing. For Pro-Ject tonearms, the fixing rod has two sides. A pointed end – excellent for any type of tonearm or bearing. And a second flat end, which fits exactly into the center screw of our higher-end tonearms and their bearings (X1, X2, CC and CC Evo, …).With this approach the exact distance for the overhang is set up in no time – with unmatched accuracy on top. You do not need to go back and forth between the inner and outer null-points for a 100% accurate overhang distance, like you would have to with other kinds of alignment protractors! This is also the reason why only the inner null-point is printed on the Align it PRO!For beginners or pros, the Align it PRO comes with detailed instructions and background knowledge to equip you with all the information you need to maximise your vinyl playback.Baerwald GeometryThe Align it PRO uses the Baerwald geometry. Baerwald is an excellent allrounder that many people choose to start their alignment journey with. It strikes an ideal balance of inner and outer grooves tracking, while maintaining excellent linearity in the middle part of your vinyl. The music industry nowadays tends to go back to shorter lengths (20 min or lower per side), and uses 2 records – 4 sides – per album. Baerwald is a perfect choice for this trend and works universally well for many other styles too. Align it PRO is suitable for all Pro-Ject turntables and many other manufacturer‘s turntables and tonearms depending on their pivot to spindle distance.

A2 technologyThe A2 continues the success of our fully mechanical automatic turntables. With the A2, you can now select the drop off point for 7“ (singles) or 12“ (LPs) for 45 RPM records. We have also added 78 RPM to the system allowing you to dig back into old shellac collections. To enjoy listening to your A2, just press start and the tonearm automatically moves to the lead in groove of the record. Once playing, the automatics are completely taken out of the equation.And because the automatics are working entirely mechanically – no additional electronics needed – they truly do not influence or degrade sound quality during playback! At the end of the record, the tonearm is automatically brought back and gently lowered into its resting position and the motor shut off.Why sub-chassis?Automatic turntables have many small mechanical parts, which means you need more hollow space in the chassis to fit them. Hollow spaces are the biggest problem as they always reinforce resonances. By using a sub-chassis, you decouple the tonearm and drive from the chassis. In other words, a sub-chassis is a MUST for automatic turntables and enables them to reach excellent sound performance.Improved Automatic MechanismWe have invested in a new aluminium diecast top for the whole sub-chassis and automatic mechanism. We have tried to avoid plastic parts from the original German automatic design as much as possible. This is the first time in all the 50 years of its existance that the original automatic design has received an improvement like this. Due to the new aluminium diecast cover and the massive chassis, the whole sub-chassis construction is more effective and isolates unwanted resonance much better.Massless Tracking Force AdjustmentThe A2 uses a new system for setting the tracking force. As usual, you first level out the tonearm with the damped counterweight. Damping the counter- weight makes the tonearm as a whole more robust and decouples the counterweight from the tonearm reducing resonant frequencies. Afterwards the tracking force is set by turning a dial directly on the tonearm bearing. Not only is this system very fast, precise and efficient, it also keeps the center of gravity directly on top of the bearing center. The spring based anti-skating can also be adjusted directly on the tonearm base.Improved Tonearm & Cardanic Bearing The A2 features an 8.3” ultra-light-mass aluminium tonearm with an improved tonearm tube with bigger diameter. The is a perfect match for the slightly heavier Ortofon 2M Red. In combination we retain the super fast response and all transient detail with lots of fine microdynamics, while the new 2M Red adds a lot of body and musical warmth. The tonearm bearing has received a major upgrade, is now made out of aluminium and features a 4-pin-point cardanic construction with steel tip ball bearings from our own production. This allows for unhindered and free tonearm movement with the lowest amount of friction possible. The A2 will track your vinyl records with the utmost of precision and tightness.Why Ultra-Light-Mass Tonearm?Since forever, there has been this technical discussion about light-weight tonearms with high compliance MM cartridges vs. heavy tonearms with low compliance MC cartridges. Both approaches have advantages and disadvantages and you‘ll find detailed analysis in concerned literature. However, when it comes to automatic turntables, we NEED ultra-light-mass tonearms. There is no way around it. We need the automatic mechanics to be like those in mechanical watches: small and precise. A heavy tonearm would result in a rougher mechanical design as much higher masses have to be moved. Therefore, the A2 reaches performance hights like no other automatic turntable on the market.

Audiophile vertical Plug & Play turntable with wall-mount option!A turntable set-up does not need to be as complicated as rocket-science. Our VT-E BT turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users. The fastest possible installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set for the included Ortofon OM 5E cartridge. The VT-E BT turntable can be positioned on a table or mounted on a wall.For further ease of use, it comes with a phono pre-amplifier and BT transmitter. So you can easily connect your VT-E BT via BT to any BT speakers or headphones! You can use both BT and RCA output at the same time. VT-E BT is available in black, red or white high gloss colour.

Precision tonearm with carbon-fibre armtube. The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing. The tonearm fits on turntables or tonearm boards with mounting hole according to Linn standardFeaturesThe headshell and armtube are fashioned from a single piece of carbon-fibre.Conical armtube avoids standing wave reflections.Inverted bearing design with four ABEC7 spec ballraces.Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.Sorbothane® -damped counterweight effectively counteracts unwanted resonances.Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.Straight armtube reduces toe-in error.Silicone-damped armlift can be adjusted to suit arm height.The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.Terminal with phono sockets and earth screw.

Precision tonearm with carbon-fibre armtube. The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing. The tonearm fits on turntables or tonearm boards with mounting hole according to Linn standardFeaturesThe headshell and armtube are fashioned from a single piece of carbon-fibre.Conical armtube avoids standing wave reflections.Inverted bearing design with four ABEC7 spec ballraces.Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.Sorbothane® -damped counterweight effectively counteracts unwanted resonances.Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.Straight armtube reduces toe-in error.Silicone-damped armlift can be adjusted to suit arm height.The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.Terminal with phono sockets and earth screw.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Το Debut PRO φέρνει έναν εντελώς νέο σχεδιασμό στα πικάπ Pro-Ject. όχι μόνο οπτικά, αλλά το πιο σημαντικό , από την άποψη του ήχου. Τα εξαρτήματα ακριβείας CNC είναι τέλεια συντονισμένα και οδηγούν το Debut PRO στον μοντέρνο απλό, κομψό και πρωτοφανή σχεδιασμό του. Το φινίρισμα από νίκελ όλων αυτών των εξαρτημάτων αλουμινίου έχει ως αποτέλεσμα μια σκληρή, ανθεκτική επιφάνεια.αποφεύγουμε πλαστικά και παρόμοια υλικά που γερνούν με την πάροδο του χρόνου και το πιο σημαντικό, θα υποβαθμίσουν την ποιότητα του ήχου. Ο ηλεκτρονικά ρυθμιζόμενος σύγχρονος κινητήρας οδηγεί το πλατό και εγγυάται τις πιο ακριβείς και σταθερές ταχύτητες. Αλλάξτε εύκολα με τον διακόπτη εναλλαγής. Με την παρεχόμενη στρογγυλή ζώνη για 78 rpm μπορείτε επίσης να ακούσετε τους δίσκους σας από shellac. Το νέο πλατό Debut PRO είναι αντιμαγνητική βαριά αλουμινίου έχει ένα δακτύλιο από TPE (θερμοπλαστικό ελαστομερές) στο εσωτερικό που βοηθά στην απόσβεση όλων των συντονισμών και ελαχιστοποιεί το wow and flutter.. Το ξεχωριστά διαθέσιμο Record Puck PRO παρέχει ένα επιπλέον επίπεδο απόσβεσης και σταθερότητας, επομένως είναι το τέλειο πρόσθετο για το Debut PRO. Διαθέτει ένα μονοκόμματο βραχίονα σάντουιτς από άνθρακα-αλουμίνιο. Η στρώση άνθρακα δίνει στον βραχίονα υψηλό βαθμό ακαμψίας, ενώ ο εσωτερικός σωλήνας αλουμινίου αναλαμβάνει την απόσβεση του βραχίονα. Αυτό κάνει τον βραχίονα τέλειο για αναβάθμιση με κεφαλές MC ανώτερης ποιότητας! Ο βραχίονας μπορεί να ρυθμιστεί αφου στη βάση του υπάρχουν βίδες, ως προς το αζιμούθιο και το VTA.Διαθέτει τη νέα κεφαλή Ortofon Pick-it pro.

Η Project Audio Εξέλιξε Ακόμα Περισσότερο το Πιο Δημοφιλή της Πικάπ! Το Αποτέλεσμα είναι ένα Εντελώς Βελτιωμένο Πικάπ! Το Debut Carbon EVO εστιάζει ακριβώς στα σημεία που κάνουν ένα πικάπ να ακούγεται τέλειο. Τεχνικά έχει σωστό σχεδιασμό, πολύ προσεγμένη εμφάνιση και φυσικά είναι χειροποίητο και φτιαγμένο στην Ευρώπη. Το σώμα του είναι από MDF και με τα 8 περάσματα βαφής στο χέρι έχει τη καλύτερη οπτική και αίσθηση που είχε ποτέ.  Debut Carbon EVO TPE platter Project Audio Το πλατό του, βάρους 1,7kg είναι βαρύτερο από κάθε άλλο πλατό που κυκλοφορεί σε αυτή τη κατηγορία τιμής. Αποτελείται από μέταλλο και στο εσωτερικό του η project έχει βάλει ένα δακτυλίδι από TPE (thermoplastic elastomer). Τα μεταλλικά πλατό έχουν το μειονέκτημα του μεγάλου συντονισμού αλλά με τη χρήση του TPE όχι μόνο κατάφερε να τον εξαλείψει τελείως αλλά και να δημιουργήσει με αυτό το τρόπο μια κινούμενη εσωτερική ενέργεια. Αυτή η ενέργεια είναι το φαινόμενο του flywheel effect! Το αποτέλεσμα είναι η ακόμα πιο ομαλή και αθόρυβη λειτουργία! Στο Debut Carbon EVO έχει επανασχεδιαστεί η ανάρτηση του μοτέρ. Βελτιώθηκε η αρχική σχεδίαση για να μειώσουν ακόμα περισσότερο τους ανεπιθύμητους κραδασμούς. Στο μπροστινό μέρος από τη κάτω μεριά υπάρχει διακόπτης 3 καταστάσεων για να ελέγχεται με ηλεκτρονικό κύκλωμα η ταχύτητα αναπαραγωγής. Τα ολοκαίνουργια αλουμινένια πόδια στήριξης μπορούν να ρυθμιστούν σε 3 ύψη για να ταιριάζει τέλεια σε οποιοδήποτε επιφάνεια. Έρχεται με την πασίγνωστη κεφαλή MM της Ortofon, την 2M Red, η οποία προσφέρει δυναμικό ήχο με μεγάλη έκταση συχνοτήτων και παράλληλα τον ζεστό ήχο της αναλογικής αναπαραγωγής. Ο βραχίονας είναι 8,6”, ενιαίας σχεδίασης, από ανθρακονήματα. Πολύ ελαφρύς, πολύ σταθερός και προσφέρει πολύ καλή ποιότητα ήχου και μεγάλη μουσική σκηνή. Στην έξοδο του συναντάμε τα επίχρυσα RCA για να μπορούμε να βάλουμε όποιο καλώδιο πικάπ θέλουμε αν και ήδη περιέχεται το καλώδιο Connect It E της Project Audio που προσφέρει άριστη σύνδεση μεταξύ του πικάπ και του ενισχυτή ή προενισχυτή Πικάπ.

Tuner Box S2 – A lot of radio in a compact box This small FM-only tuner is fully loaded with high-quality audio and useful features. 99 station presets are more than enough to store your favourite radio stations. Tuner Box S2 can ideally be used in combination with other Box design components. For example, the Trigger In and Out allow you to remotelly power on and off the Tuner Box S2 via a Pre Box S2 Analogue. The included full functional IR-remote and the high-contrast dot-matrix display make this unit a delight to use!

Tuner Box S2 – A lot of radio in a compact box This small FM-only tuner is fully loaded with high-quality audio and useful features. 99 station presets are more than enough to store your favourite radio stations. Tuner Box S2 can ideally be used in combination with other Box design components. For example, the Trigger In and Out allow you to remotelly power on and off the Tuner Box S2 via a Pre Box S2 Analogue. The included full functional IR-remote and the high-contrast dot-matrix display make this unit a delight to use!

Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product.

Compact record cleaning machine The VC-E is a compact and very affordable record cleaning machine. Regardless of its size and price, the VC-E offers a lot of features: The aluminium surface of the VC-E is able to withstand excessive fluid spill without compromising the chassis. The VC-E is super powerful and cleans records in as little as one or two rotations. The very best results are achieved with one rotation forward followed by one backwards. It turns the record superfast within 2 seconds per rotation, which is about 3 times faster than comparable cleaning machines. The result is a much faster and more effective cleaning process. A clamp seales the record label from cleaning fluid and avoids damage on the label. The robust metal arm is easy to use, mechanically stable and focuses all suction power directly onto the record surface. Our eco-friendly and non-alcoholic vinyl cleaning concentrate, Wash-IT, offers very good cleaning results and reduces static charge, so record wear and stylus wear are significantly reduced. If you are looking for a compact and yet affordable record cleaning machine, the VC-E is definitely your choice.

Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net