Rega

Rega Nd3The Rega Nd3 phono cartridge is a moving magnet (MM) model with an elliptical diamond. It is the entry-level model in the Rega Nd series. The latter is characterized by the use of a N55 neodymium magnet, the most powerful on the market, usually reserved for moving coil (MC) cartridges. The Rega Nd3 hifi cartridge promises rich and detailed reproduction as well as a wide soundstage.The Rega Nd3 moving magnet cartridge provides detailed reproduction and a wide soundstage to rediscover your favourite vinyl records.3-point fixingThe Rega Nd3 phono cartridge replaces the Rega Elys 2 model. Like the latter, it is designed to preserve the integrity of the musical signal by eliminating losses due to vibrations and resonances. Its internal design and its three-point fixing system, specific to the British manufacturer, ensure a perfect connection with the tonearm. The cartridge-tonearm couple is now one, the mechanical vibrations outside the signal are evacuated from the cartridge to the tonearm and then from the tonearm to the turntable, producing a resonance path which moves away from the record and preserves all the reading acuity of the cartridge.The Rega Nd3 phono cartridge uses the 3-point fixing standard used by the British manufacturer in order to benefit from perfect stability and an optimal connection with the tonearm.Elliptical diamond, aluminum cantileverThe Rega Nd3 phono cartridge features an elliptical diamond. This is mounted on an aluminium cantilever. A lightweight and rigid material that ensures perfect tracking of the grooves in order to extract every detail. The pivoting pads of the Rega Nd3 cartridge improve sonic performance by eliminating the mechanical joint between the stylus and the main body. The result is better tracking of the grooves and more playback stability.Wide and detailed soundstageThe Rega Nd3 cartridge shines with its sound reproduction. The soundstage is wide and precise. Indeed, this phono cartridge benefits from an optimized space between the poles. Thus, the Rega Nd3 guarantees excellent linearity and superior crosstalk characteristics, which allows to obtain a very wide soundstage. Another new feature is the miniaturized parallel winding using a 38 micron wire with only 1275 turns which optimizes the inductance and impedance in order to maximize the response in the high frequencies.

Rega Nd5The Rega Nd5 phono cartridge is a moving magnet (MM) model with a bare elliptical diamond belonging to the Rega Nd series. The latter is characterized by the use of a N55 neodymium magnet, the most powerful on the market, usually reserved for moving coil (MC) cartridges. The Rega Nd5 hifi cartridge promises clear and detailed reproduction as well as a wide soundstage.The Rega Nd5 moving magnet cartridge guarantees clear reproduction and a wide soundstage ideal for rediscovering your favourite vinyl records.3-point fixingThe Rega Nd5 phono cartridge replaces the Rega Elys 2 model. Like the latter, it is designed to preserve the integrity of the musical signal by eliminating losses due to vibrations and resonances. Its internal design and its three-point fixing system, specific to the British manufacturer, ensure a perfect connection with the tonearm. The cartridge-tonearm couple is now one, the mechanical vibrations outside the signal are evacuated from the cartridge to the tonearm and then from the tonearm to the turntable, producing a resonance path which moves away from the record and preserves all the reading acuity of the cartridge.The Rega Nd5 phono cartridge uses the 3-point fixing standard used by the British manufacturer in order to benefit from perfect stability and an optimal connection with the tonearm.Bare elliptical diamondThe Rega Nd5 phono cartridge is equipped with a bare elliptical diamond, which justifies the upgrade compared to the Nd3 model with an elliptical diamond. The bare elliptical diamond benefits from a stylus cut from a single piece. Thus, its lower mass offers better precision in tracking the groove. The sound is richer and more detailed, transients are better respected. This diamond is mounted on an aluminum cantilever. A light and rigid material that ensures perfect tracking of the grooves in order to extract every detail.Wide and detailed soundstageThe Rega Nd5 cartridge shines with its musical reproduction. The soundstage is wide and precise. Indeed, this phono cartridge benefits from an optimized space between the poles. Thus, the Rega Nd5 guarantees excellent linearity and superior crosstalk characteristics, which allows to obtain a very wide soundstage. Another new feature is the miniaturized parallel winding using a 38 micron wire with only 1275 turns which optimizes the inductance and impedance in order to maximize the response in the high frequencies.

Rega Nd7The Rega Nd7 phono cartridge is a moving magnet (MM) model with a Fine Line stylus. It tops the Rega Nd series. The latter is characterized by the use of a N55 neodymium magnet, the most powerful on the market, usually reserved for moving coil (MC) cartridges. The Rega Nd7 hifi cartridge promises clear and detailed reproduction as well as a wide soundstage.The Rega Nd7 moving magnet cartridge guarantees a very rich reproduction thanks to its Fine Line tip bare diamond.3-point fixingThe Rega Nd7 phono cartridge replaces the Rega Elys 2 model. Like the latter, it is designed to preserve the integrity of the musical signal by eliminating losses due to vibrations and resonances. Its internal design and its three-point fixing system, specific to the British manufacturer, ensure a perfect connection with the tonearm. The cartridge-tonearm couple is now one, the mechanical vibrations outside the signal are evacuated from the cartridge to the tonearm and then from the tonearm to the turntable, producing a resonance path which moves away from the record and preserves all the reading acuity of the cartridge.The Rega Nd7 phono cartridge uses the 3-point fixing standard used by the British manufacturer in order to benefit from perfect stability and an optimal connection with the tonearm.Fine Line PointThe Rega Nd7 phono cartridge is equipped with a bare diamond with a Fine Line tip. This high-end stylus adopts a specific profile, offering a larger contact surface with the groove. Listening gains in details and micro-information. High frequencies are reproduced with more finesse, the frequency response is wider and the distortion level lower.Wide and detailed soundstageThe Rega Nd7 cartridge shines with its musical reproduction. The soundstage is wide and precise. Indeed, this phono cartridge benefits from an optimized space between the poles. Thus, the Rega Nd7 guarantees excellent linearity and superior crosstalk characteristics, which allows to obtain a very wide soundstage. Another new feature is the miniaturized parallel winding using a 38 micron wire with only 1275 turns which optimizes the inductance and impedance in order to maximize the response in the high frequencies.

Ειδικό ανοξείδωτο παξιμάδι σύσφιξης για παλαιούς βραχίονες Rega

AYA NEWDeveloped over ten years by a team of Rega designers headed up by our founder Roy Gandy, the AYA loudspeakers promise to deliver a detailed, balanced performance no matter which genre of music you decide to play. Using Rega designed, handmade drivers, coupled with our ZRR high frequency tweeter and a new crossover, our engineers have fine-tuned every aspect to deliver the best possible performance. The sculptured cabinets and stand create an attractive, floating effect which adds to the unique appearance.Breaking the mouldAfter a decade of trials and development, the Rega AYA loudspeakers are born. Housed in a unique, UK manufactured cabinet moulded from GRC, (glass reinforced cement) the glass fibres that make up the construction reduce the weight whilst increasing the structural integrity of this 2.5 way band pass design. This technique creates the perfect loudspeaker enclosure that enhances performance whilst offering exceptional value for money. Thanks to the combination of the new enclosure and drive unit configuration, the AYA loudspeakers deliver a tight accurate bass response and the Rega signature midrange and detailed highs. KEY FEATURESCustom GRC cabinet (glass reinforced cement)Band pass cabinet design2.5 way systemRega designed ZRR high frequency unit5" Handmade MX-125 Bass mid driver7" Handmade RR7.8 Bass driver*Optional loudspeaker grillesLifetime warranty against manufacture defectsSteel GreySTEEL GREY FRONT PANEL WITH DARK GREY GRC CABINETIf Rega was to continue with our customer promise to deliver exceptional performance and value for money, the ever-increasing cost of real wood veneered MDF cabinets meant we had no choice but to investigate other options. After a decade of trials and development, the AYA loudspeakers are housed in a unique, UK manufactured cabinet moulded from glass-reinforced cement. The glass fibres that make up the construction reduce the weight whilst increasing the structural integrity of this 2.5 way band pass enclosure.This technique creates the perfect loudspeaker enclosure that enhances performance whilst offering exceptional value for money. The process of moulding the AYA loudspeaker cabinets was developed alongside a UK-based company who are best known for bespoke concrete furniture and installations.Rega fans out there will know that we have always questioned the marketing and science surrounding turntables. Experiments and research have allowed us to debunk most commonly held beliefs and use real engineering to produce world beating sound quality at sensible prices. However, the loudspeaker market is very different because a valid scientific and engineering discipline exists which in turn has created hundreds of competitors in the loudspeaker marketplace. The success of many loudspeakers depends on powerful marketing, eye watering advertising budgets (of which Rega spends zero) and financial inducements to retailers. The funds that most loudspeaker companies would spend on marketing, Rega has put it all into research and development to achieve a totally unique cabinet construction.*Loudspeaker grilles are available as an optional extra and will be supplied separately. To keep costs as low as possible and avoid unnecessary waste, we have chosen not to include the grilles as standard as the majority of customers choose not to use them. These grilles are simple attached by magnet to the front plate screws to prevent cone or tweeter damage. They are covered in quality speaker cloth material minimising any impact a fitted grille may have. Images of the grille are available in the gallery section.Not unlike real wood veneer, GRC has its own characteristics. Each cabinet will be uniquely different due to the manufacturing process. Changes in shade and small surface holes in the cement are common and an expected part of the design and are not a fault. We feel these features add character to these unique cabinets.

Custom made high-quality Advanced EBLT drive belt.ADVANCED EBLT UPGRADE DRIVE BELTThe advanced EBLT drive belt is fitted as standard to all Planar 1, Planar 1 Plus, Planar 2, Planar 3 and Planar 6 models.Each belt is moulded on our highly accurate custom tooling using a unique secret blend. Once moulded, the belts are cryogenically frozen and barrelled to remove any excess flash in order to create perfect cross-sectional roundness which is critical for accurate speed and stability. In normal use and conditions, the lifespan of the EBLT drive belt is 50% longer than the previous model.Below you can see a direct comparison taken from our custom test software. You can compare the old belt (top) versus the latest EBLT reference belt (bottom). We have used the same Planar 1 turntable. The only part that has changed is the drive belt. You can clearly see a notable reduction in weighted peak Wow / Flutter measurements produced by the increased accuracy and cross-sectional roundness of the EBLT belt. The standard belt measures 0.253% / the Advanced EBLT measures 0.162% and the Reference EBLT measures 0.075%

Ιμάντας αναβάθμισης για όλα τα πικάπ Rega.Κατασκευασμένος με την μεγαλύτερη δυνατή ανοχή, ο ιμάντας κίνησης αναβάθμισης βελτιώνει την ταχύτητα οδήγησης, τη σταθερότητα και την εκκίνηση.Κάθε ιμάντας κατασκευάζεται από ένα μοναδικό και πολύπλοκο τύπο πολυχλωροπρενίου, ένα υλικό που παρουσιάζει καλή χημική σταθερότητα και διατηρεί ευελιξία σε ένα ευρύ φάσμα θερμοκρασιών.Εγγυημένος για βελτίωση της απόδοσης, ο ιμάντας κίνησης αναβάθμισης περιλαμβάνεται ως στάνταρ με τα RP8 και RP10 και περιλαμβάνεται επίσης στο πακέτο RP1.

A dedicated system remote designed for the latest ‘R’ range of Rega remote controllable products. Lightweight and ergonomically designed to fit comfortably in the hand whilst presenting the most commonly used button at your fingertips.The Solaris is backwards compatible with all* older IR Rega products.NB. Supplied as standard with the Elicit-R and Saturn-R CD DAC player.*Not compatible with Rega Radio 3 or Radio R products.

The Rega Couple 3 is designed to complement the performance of any hi-fi audio system.The low capacitance cable used for the Couple 3 is constructed using oxygen free copper (OFC) with an ultra-flexible jacket. This cable was originally developed as a critical component used inside our award-winning reference level Aura phono stage. The 80pF capacitance of this cable is matched to our custom tonearm cables used throughout the Rega range. This feature will optimise performance when used between phono stage and amplifier.Terminated with ergonomically engineered high quality Neutrik RCA plugs to maximise signal transfer, they also benefit from mechanical strain relief which protects against accidental damage.The Couple 3 is meticulously hand assembled in house to our exacting standards to ensure the highest possible quality and comes with the Rega lifetime warranty against manufacture defects.Available in 1m 1.5m and 2.0m lengths

Καλώδιο ηχείων κατασκευασμένο από χαλκό καθαρότητας 99.99%Διατομή κάθε αγωγού 4mm2

The all new Elicit MK5 stereo integrated amplifier is designed and built to the highest standard. Housed in our latest custom case to match the rest of the Rega range, the new MK5 builds on previous Rega designs by using our multi-award-winning Class A/B power amplifier circuit to deliver a powerful 105 W per channel into 8 Ω loads (127 W into 6 Ω). Our engineers have designed a new Rega DAC circuit offering digital connectivity and greater integration with a variety of other products. We have taken great care to incorporate a high quality MM phono stage and the headphone input has been configured such that the speaker switching is performed by the output mute relay to avoid obstructing the signal path.The heart of your musicThe new Elicit MK5 calls on decades of electronic design experience. It is a complex blend of three of our most successful products which promises to deliver big on sound, power, features and style. The Elicit MK5 is capable of driving difficult loudspeakers with ease and will integrate perfectly into any audio system by offering a wide range of connectivity options. In addition to line, digital, and a high-quality moving magnet (MM) phono input, you will also find pre-out, Direct in, Record loop functionality and the high-performance headphone input.Key Features105 W per channel into 8 ΩHigh quality moving magnet phono stage2 x Digital inputs - 1 x optical and 1 x Co-AxialHigh performance Rega DAC circuit for digital inputs4 Line level inputsHeadphone outputDirect InputRecord inputNew advanced pre-amplifierAlps volume potentiometerThermal Cut-OutLifetime warranty against manufacture defects

Κεφαλή Dual Magnet (ΜΜ) Made in England με πηνία υψηλών προδιαγραφών παράλληλου τυλίγματος και ελλειπτικό διαμάντι

Ειδικό felt mat κατασκευασμένο εξ’ολοκλήρου από 100% φυσικό μαλλί.Συνίσταται για τα P3/P5/P7 PL3 PL6 PL8

REFERENCE MAINS POWER LEAD The Rega Reference mains power cable is constructed in the UK to the highest quality. Supplied as standard with the Osiris amplifier, Isis CDP and Aura MC phono.Ideal upgrade for the Saturn CDP, Planar 10 PSU, Elicit and Aethos amplifiers.Available in UK / Euro / Australian / USA & Canada / Swiss versions.

Some other manufacturers cartridges may have a deeper body than Rega cartridges, these will sometimes require the use of the three-point spacer to allow clearance of the rear of the cartridge from the vinyl.When Rega arms are fitted to turntables from other manufacturers it may be necessary to add our Rega arm spacers to achieve the correct arm height.Note: On Rega turntables, spacers should not be necessary unless you are you using an exceptionally deep-bodied cartridge from another manufacturer.Arm height or V.T.A adjustment can be a controversial subject. Rega believes that the integrity of the arm fixing onto the arm mounting board is much more important than the questionable facility of arm adjustment. The arm should be reasonably parallel to the record surface or slightly lower at the mounting. The only time a spacer is necessary to raise the arm height is if the rear of a cartridge is hitting the record whilst playing.

Ακρυλικό καπάκι για όλα τα πικάπ Rega,συμπεριλαμβανομένων των μεντεσέδων στήριξης της Rega.

The Ultimate in Rega PerformanceThe Planar 10 is also fitted with a bespoke ceramic oxide platter which is diamond cut during manufacture for ultimate accuracy and speed stability. The Rega 24 V synchronous motor is controlled by our most advanced outboard power supply, the P10-PSU. This supply delivers the ultimate in motor vibration reduction, electronic fine speed adjustment and the convenience of electronic speed change. The Planar 10 is designed to deliver the ultimate in Rega performance by extracting more information from the vinyl groove than ever before.KEY FEATURESRB3000 tonearmApheta 3 or Aphelion 2 factory fitted (optional)Ceramic Oxide diamond cut platterDB technology with ceramic top braceTancast 8 foamcore plinthP10 custom matched PSUEBLT Advanced drive beltLifetime warranty against manufacture defectsULTRA-LIGHTWEIGHT PLINTHThe Planar 10 is the third Rega turntable constructed using our latest technology the ultra-lightweight Tancast 8 polyurethane foam core (a material developed for the aerospace industry). This material is sandwiched between two layers of HPL (high-pressure laminate). HPL is exceptionally thin and extremely rigid.This new construction makes the new Planar 10 skeletal plinth 30% lighter than the original RP10 while offering increased rigidity over the previous model.DB TECHNOLOGY (DOUBLE BRACE TECHNOLOGY)“Mass absorbs energy - lost energy equals lost music”! A super lightweight plinth combined with a ceramic top brace and phenolic resin bottom brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound, “stressed beam,” assembly.This rigid plinth design prevents energy absorption and unwanted resonances which will add unnatural distortions to the music. Equally, heavier mass can transfer more unwanted energy such as motor or bearing noise directly into the rotating record. The tonearm and cartridge must be able to read accurately, directly from the platter. This unique Rega double brace solution enables this.The use of braces instead of the complete skin allows increased thickness in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.RB3000 TONEARMRega is renowned for the quality of its tonearm bearing assemblies. In particular the accurate manufacturing of our bearing housing and bearing spindles. Technical characteristics such as “roundness” and “parallelity” are critical.Over the past three years, Rega has found a new manufacturing process which improves on all these characteristics resulting in a micron perfect bearing fit. The RB3000 is the first Rega arm to benefit from these improvements. The entire tonearm structure is designed to have the minimum of mechanical joints while using the stiffest materials in all critical areas.The tolerance of the RB3000 tonearm is so tight that no adhesive is used at any point throughout the construction. Our latest low mass, precision engineered, vertical bearing assembly has been manufactured to further complement the inherent design philosophy of the Planar 10 turntable.The RB3000 tonearm uses our advanced, preloaded zero tolerance bearing assembly adjusted to less than 1000th of a mm. This gives friction-free movement and zero levels of unwanted play. Simply put, friction-free bearings with no play enable ridges in the record groove of less than a micron to be read.The RB3000 also uses our latest award-winning, aluminium, Rega arm tube (each one of which is meticulously hand polished, keeping mass to an absolute minimum) which was redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.HUB BEARING ASSEMBLYThis latest design demonstrates attention to detail and modern CNC engineering advances. This allows new compromises, bringing Rega’s main bearing design closer than ever to the unachievable ideal.The Planar 10 uses a new low mass central bearing assembly. A single piece machined aluminium sub-platter and hardened tool steel spindle run inside a custom brass housing designed with improved mechanical integrity. The complete assembly is cleverly mounted within the chassis to eradicate unwanted potential energy being transferred or stored in the plinth.CERAMIC PLATTERThe P10 uses a custom ceramic, flywheel effect platter. The platter is produced from ceramic oxide powder which is compressed, fired and diamond cut to ensure perfect accuracy and flatness across the surface. The latest platter features a modified construction with improved coupling to the sub-platter.24 V LOW NOISE MOTOR ASSEMBLYThe Planar 10 uses Rega’s latest generation, 24 V, synchronous, low vibration motor technology. Uniquely mounted using the highest level of coupling while retaining higher vibration isolation than any previous model, this new motor mounting technique (mounted from the bottom) has been taken directly from the ultimate Rega turntable, the Naiad. This unique mounting method removes all stress from the motor body whilst holding the drive pulley perfectly still. This enables better speed stability and accuracy from the turntable.The reduced vibration and more rigid mounting delivers superior drive from the new EBLT drive belts. Each motor is hand-tuned to match its own custom-matched PL10 PSU power supply before fitting to the turntable to optimise the anti-vibration circuit.EBLT DRIVE BELTSFor three years Rega has been researching and developing with chemists the use of a bespoke new rubber compound for drive belts. Using a specialised curing system, the new drive belt offers superior consistency of modulus (a constant representing the degree to which a substance has a particular property, especially elasticity).These new belts are manufactured on Rega designed, state of the art, super-accurate tools (inspired by working with the manufacturer of high-tech Formula 1 engine parts) which produce ‘perfectly round’ and ‘dimensionally accurate’ belts, critical for perfect speed stability.PL10 PSUThe PL10 PSU offers the ultimate in motor control stability, convenient electronic speed change, advanced anti-vibration control and user adjustable electronic fine speed adjustment to ensure total accuracy and control over the life of the motor.Housed in Rega’s latest custom-designed case, the PL10 PSU is dedicated to running our 24v, low noise motor as quietly and as accurately as possible. The speed and control of the motor is achieved by using a new DSP (Digital Signal Processing) generator built upon a high stability crystal. This device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed.The DSP core will also generate a near perfect sinusoidal waveform to power the motor. Factory set vibration removal and fine speed adjustments are then made to the power supply to tune each motor for optimal performance.DUST COVERThe outer frame of the previous model has now been removed and a new stylish, removable, single piece dustcover has been introduced further reducing the overall mass of the turntable.

Adaptor για τους δίσκους 45 στροφών ,απο τη Rega σε μια κομψή σχεδίαση.

The Elex MK4 is a high performance stereo integrated amplifier designed to deliver the purest musical performance. Housed in a brand new case to match the rest of the Rega range, the MK4 builds on previous Rega designs using our multi-award winning class A/B power amplifier circuit which delivers an impressive 72W per channel into 8Ω loads (90W into 6Ω). New rear connectivity options are available with the Elex MK4 now including a Rega DAC circuit with two digital inputs and a high quality headphone output conveniently located on the front panel.KEY FEATURES72 W per channel into 8 Ω / 90 W into 6 ΩHigh quality moving magnet phono stageHigh performance Rega DAC circuit for digital inputs2 x Digital inputs – 1 x optical and 1 x Co-AxialHeadphone output4 Line level inputsNew custom design caseThermal Cut-Out

The Elex MK4 is a high performance stereo integrated amplifier designed to deliver the purest musical performance. Housed in a brand new case to match the rest of the Rega range, the MK4 builds on previous Rega designs using our multi-award winning class A/B power amplifier circuit which delivers an impressive 72W per channel into 8Ω loads (90W into 6Ω). New rear connectivity options are available with the Elex MK4 now including a Rega DAC circuit with two digital inputs and a high quality headphone output conveniently located on the front panel.KEY FEATURES72 W per channel into 8 Ω / 90 W into 6 ΩHigh quality moving magnet phono stageHigh performance Rega DAC circuit for digital inputs2 x Digital inputs – 1 x optical and 1 x Co-AxialHeadphone output4 Line level inputsNew custom design caseThermal Cut-Out

We are celebrating our 50th Anniversary with a very special edition of the legendary Rega Planar 3. A turntable package designed and developed to maximise the performance from this model. As part of the celebration, we have put this anniversary package together at an incredible price that won't be repeatable, contact your dealer for details.Presented in the hugely popular new walnut effect finish, the 50th anniversary Planar 3 is supplied with a hand tuned Neo PSU MK2 and the handmade Rega Exact moving magnet cartridge factory fitted. The drive system uses our Reference EBLT drive belt and our 24V motor fitted with a custom CNC’d aluminium drive pulley to deliver the absolute best in performance and accuracy. The Anniversary Edition is badged with exclusive aluminium plinth and lid badges for the finishing touch.Celebrating 50 Years of Rega Research Ltd.From humble beginnings in 1973, making just a handful of turntables for friends, Rega has since grown into a multimillion-pound audio engineering company making world-class, award-winning hi-fi products that are supplied across the globe.Since inception, our expertise in mechanical and electrical engineering was combined with three core values; to create products that perform beyond expectation, deliver unrivalled value for money, and offer lifelong reliability. These same values are upheld today and are key factors in our continued growth and success. 

DescriptionThe IO has been designed to offer exceptional Rega performance at an affordable price point. It uses the same amplifier stage as the multi-award winning Brio now designed to run at 30 W per channel into 8 Ω. The IO features two line level inputs, a high specification Rega moving magnet phono stage, and a dedicated high quality headphone output. The IO will integrate seamlessly into any home audio system whilst remaining simple to use and easy to set up. A must for demonstration.Because music mattersThe IO uses the same power amplifier and phono stage as its larger brother, the multi-award winning Brio. The IO aims to deliver exceptional sound quality in a smaller and more cost effective package. The class A/B circuit shares its DNA with the rest of Rega’s amplifiers, and as usual, great care has been taken in component selection. Sanken output transistors and an Alps volume potentiometer and a linear power supply that enables an output of 30 watts per channel into 8 Ω. Two line level inputs and a high quality moving magnet phono input are available as sources. There is a headphone output provided on the front of the unit for powering standard hi-fi headphones; this is driven from the power amplifier stage of the unit through relays to avoid signal degradation when headphones are inserted or the product is muted. A new redesigned mini remote handset is included.Key Features: Integrated phono stageHeadphone socketMini remote controlAll new custom designed chasisLifetime warranty against manufacture defects 

DescriptionThe Rega Aethos stereo amplifier is housed in a brand new, custom designed case. Employing four 160 W 16 Amp output transistors per channel, this delivers 156 W per channel into 6 Ω. The Aethos is a dual mono design using a custom wound toroidal transformer and regulated supplies for the sensitive amplification and driver stages. The pre-amplifier stage uses class-A discrete circuitry throughout. The Aethos is a no compromise product with one goal, to deliver your music as faithfully as possible.Design InnovationOur time, effort and money have been spent on developing the circuit and construction, utilizing the highest specification of components throughout. As part of the design we have included useful features such as the switchable direct input and preamplifier output, to enable the new Aethos amplifier to be used in a wide combination of systems. The headphone socket has been integrated such that the speaker switching is performed by the output mute relay as so not to obstruct the signal path and degrade the sound quality.We have taken the design concepts underpinning the multi award winning and hugely successful Elex-R and Elicit-R and propelled the performance to the next level and beyond with a 125watt dual mono design with features such as fully discrete FET based line amplifier, polypropylene capacitors throughout the signal path, K-Power reservoir capacitors, power amplifier regulated supply and a high current output stage comprising of four 160w Sanken output transistors per channel.Key Features:156 W per channel into 6 Ω (125 W per channel into 8 Ω)Dual mono design5 Line inputsHeadphone socketRemote controlDirect inputRecord outPre-amp outLifetime warranty against manufacture defects

DescriptionThe new Saturn MK3 is re-housed in our very latest case designed to match the rest of the Rega range. The Saturn MK3 CD-DAC player offers complete flexibility and integration into any audio system. Essentially two products in one, the Saturn MK3 houses an independent DAC circuit and a high specification CD transport. Both sections are fully remote controllable via the supplied Solaris remote handset.Digital masteredYou will find plenty of connectivity options, up to and including 24bit-192 kHz. The Saturn MK3 has two optical inputs, two Co-Axial inputs, a fully asynchronous USB and an added ‘direct’ digital output from the CD playback section. This ensures the Saturn MK3 integrates perfectly into any system and provides the perfect partner for the forthcoming Rega Elicit MK5 integrated amplifier.Key FeaturesDual Wolfson WM8742 DAC'sUSB 192 kHz - 24 bits asynchronousEnhanced output amplifier circuitEnhanced digital power suppliesRedeveloped analogue & digital outputsSolaris system remote includedLifetime warranty against manufacture defectsCDP FeaturesThe Saturn MK3 uses our proven digital to analogue converter and analogue output amplifier technology coupled with a pair of Wolfson WM8742 digital to analogue converter ICs. The Saturn MK3 utilises our own CD section power supply which was a result of the research & development of our reference CD player along with the improved microcontroller and display drivers.TechnologyThe Saturn MK3 uses a high stability master clock and high capacity power supply in the CD circuitry, high performance PLL digital interface receiver, isolated digital inputs and high performance power supply architecture in the DAC circuitry. Signal switching between the CD and DAC functions are performed in the digital to analogue converter stage. The signal path of the CD section in CD mode is kept to a minimum.USB 192KHZ-24BITS AsynchronousThe DAC USB input has been improved with asynchronous operation at sample rates of 44.1 to 192 kHz with a bit rate of up to 24 bits. The USB input has the same galvanic isolation as used in the Rega DAC-R. The USB uses dedicated drivers in the computer, enabling full ASIO operation, thus eliminating signal degradation caused by generic windows based drivers.Saturn MK3 XMOS USB Driver V2.15.0Before you can use the USB function of the Saturn MK3 you must first download the Rega USB Windows driver and install it on your PC. Access via the downloads section on this web page. Follow the instruction for installation. Once installed, USB will be ready to use. This driver is not required for MAC OS.PLEASE ENSURE THAT YOUR SYSTEM IS CONFIGURED CORRECTLY TO OUTPUT HIGH RESOLUTION FILES WITHIN YOUR CHOSEN AUDIO/MEDIA PLAYBACK SOFTWARE.If your PC does not default to the connected USB audio device you must select the XMOS AUDIO DEVICE FROM THE DROP DOWN LIST.

DescriptionThe Rega Fono Mini A2D-V2 is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D-V2 is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D-V2 benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.

DescriptionThe Rega Fono MC disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.

Το phono stage Fono MM MK5 έχει σχεδιαστεί για να είναι αποτελεσματικό, εύκολο στη χρήση και πάνω απ' όλα για αναπαραγωγή μουσικής. Το Fono MM MK5 χρησιμοποιεί μια πλήρως διακριτή, διαδοχική, συμπληρωματική βαθμίδα εισόδου ενισχυτή, μια διαμόρφωση που έχει σχεδιαστεί για να βελτιστοποιεί την απόδοση κεφαλής κινούμενου μαγνήτη. Τώρα στεγάζεται σε μια ολοκαίνουργια επανασχεδιασμένη θήκη για να ταιριάζει με το νέο Fono MC και την τελευταία σειρά ηλεκτρονικών εξαρτημάτων της Rega που προσφέρουν μια μοντέρνα εμφάνιση που εγγυάται την ενσωμάτωση σε οποιοδήποτε σύστημα hi-fi.

Το πιο πρόσφατο μέλος της σειράς κεφαλών Rega MC, η Ania Pro χρησιμοποιεί την προηγμένη ακίδα γυμνού διαμαντιού προφίλ Vital. Αυτό το προφίλ έχει σχεδιαστεί για να εξάγει όσο το δυνατόν περισσότερες λεπτομέρειες από την επιφάνεια του βινυλίου. Η Ania Pro προσφέρει σφιχτά μπάσα, ζεστή μεσαία περιοχή και ακριβείς υψηλές συχνότητες για να προσφέρει μια καλά ισορροπημένη και λεπτομερή απόδοση.Ακούστε σαν επαγγελματίαςΧρησιμοποιώντας το μοναδικό μας χειροποίητο πηνίο μικροτύλιξης που βρίσκεται και στην υπόλοιπη σειρά MC, η Ania Pro στεγάζεται σε ένα μοναδικό εξαιρετικά άκαμπτο σώμα, εξασφαλίζοντας ακριβή κατασκευή και τη μέθοδο στερέωσης τριών σημείων της Rega που προσφέρει βέλτιστη σύνδεση με το κέλυφος κεφαλής.

Βραχίονας ευθύγραμμου τύπου Made in EnglandΕνεργό μήκος 9’’Μοναδική χυτοπρεσαριστή κατασκευή εξ’ ολοκλήρου από κράμα αλουμινίουΜονοκόμματο μπράτσο με ειδική σκλήρυνση, θερμική βαφή και κατεργασία στο χέριΈδραση και κίνηση όλων των μερών με ρουλεμάν υψηλής ακριβείας μηδενικών ανοχών κατασκευασμένων από χρωμονικελιούχο χάλυβαΤα ρουλεμάν έδρασης επιλέγονται αυστηρά ανά ταιριασμένο ζεύγος για κάθε βραχίοναΠλήρη κατανομή μάζας με υψηλή ακρίβεια και ισορροπία

Βραχίονας ευθύγραμμου τύπου Made in EnglandΜοναδική χυτοπρεσαριστή κατασκευή εξ’ ολοκλήρου από αλουμίνιοΜονοκόμματο μπράτσο με ειδική σκλήρυνση και θερμική βαφήΈδραση και κίνηση όλων των μερών με ρουλεμάν ακριβείαςΚατανομή μάζας μεγάλης ακριβείας

Βραχίονας ευθύγραμμου τύπου Made in England. Ενεργό μήκος 9’’, Μοναδική χυτοπρεσαριστή κατασκευή εξ’ ολοκλήρου από αλουμίνιο. Μονοκόμματο μπράτσο με ειδική σκλήρυνση .Έδραση και κίνηση όλων των μερών με ρουλεμάν ακριβείας .Κατανομή μάζας μεγάλης ακριβείας.

Πικάπ χειροποίητης κατασκευής Made in EnglandΤεχνολογία Πλατό - Υποπλατό.

Το στάδιο αναφοράς Aura MC είναι το αποκορύφωμα δεκαετιών ανάπτυξης ηλεκτρονικού σχεδιασμού.  Ο απόλυτος, πλήρως ρυθμιζόμενος, τριών σταδίων, όλα συμμετρικός προ-ενισχυτής που έχει σχεδιαστεί αποκλειστικά για να εξαγάγει την καλύτερη δυνατή απόδοση από την κασέτα κινούμενων μερών και το σύστημα αναπαραγωγής βινυλίου. Χτισμένο σε μια τελείως ανανεωμένη προσαρμοσμένη θήκη, η Aura είναι αφιερωμένη στη μετακίνηση των κασετών των πηνίων και παραμένει χωρίς κανένα συμβιβασμό. Έχουμε αποφύγει να συμπεριλάβουμε τυχόν περιττές λειτουργίες καθώς παρεμποδίζουν τη διαδρομή σήματος και υποβαθμίζουν την ποιότητα του ήχου. Ο προ-ενισχυτής Aura phono ενσωματώνει αξιόλογες και πρωτοποριακές ιδέες σχεδίασης. Εάν είστε γνώστης βινυλίου, τότε το Aura MC είναι απόλυτη ανάγκη για επίδειξη.

Χειροποίητη Reference κεφαλή κατόπιν ειδικής παραγγελίας Made in England.

Χειροποίητη Reference κεφαλή κατόπιν ειδικής παραγγελίας Made in England.

Χειροποίητη κεφαλή Moving Coil, Made in England.

Το νέο Planar 2 αναπτύχθηκε τα τελευταία δύο χρόνια παράλληλα με το πρόσφατα κυκλοφορήσαν Planar 3. Διαθέτοντας τον ολοκαίνουργιο βραχίονα RB220, με πρωτοποριακή νέα σχεδίαση.Ένας νέος κινητήρας 24v, χαμηλού θορύβου, ακρυλικό έλασμα, νέο σχεδιασμένο κεντρικό έδρανο και πολλά άλλα. Κάθε χαρακτηριστικό αυτού του καινοτόμου νέου πικάπ έχει σχεδιαστεί για να εξάγει το μέγιστο όγκο πληροφοριών και λεπτομερειών από τη συλλογή βινυλίου σας !Χαρακτηριστικά:Re-designed feet - New improved foot assembly to increase stability and reduce vibration transfer.Carbon cartridge - supplied as standard on all Planar 2’s for simple plug and play convenience.Motor cover tray - with integrated cooling.Optional lid / plinth protectors - supplied to prevent marks on the plinth and keep it looking its best.Instructions - Easy to use multi-lingual quick start guide for easy set up.Packaging - New improved packaging.Dimensions (lid closed) H 11.7 x W 44.7 x D 36 cmWeight 5.5kg 

Πλήρως αναλογικό Hi-End Phono stage Made in EnglandΚατασκευή Dual mono με διακριτά υλικά και πυκνωτές πολυπροπυλενίουPhono to Line, Phono stage με εισόδους για κεφαλές Moving Magnet και Moving Coil.

Το Planar 8 εμπνεύστηκε από τον τελικό πικάπ Rega, το «Naiad». Αποφασίσαμε νωρίς ότι αντί για μια εξέλιξη του προηγούμενου RP8, το νέο Planar 8 θα πρέπει να αναπτυχθεί και να σχεδιαστεί ώστε να ενσωματώνει την ουσία του «Naiad» σε προσιτή τιμή. Στόχος μας ήταν να επιτύχουμε ένα επίπεδο απόδοσης πολύ πέρα ​​από αυτό που έχει επιτευχθεί σε αυτό το σημείο τιμών πριν. Κάθε πτυχή του Planar 8 είναι σχεδιασμένη ώστε να εξάγει όσο το δυνατόν περισσότερες λεπτομέρειες από την επιφάνεια του βινυλίου. Χρησιμοποιήσαμε τα πιο εξελιγμένα υλικά και τεχνικές λύσεις που κατασκευάστηκαν γύρω από ένα εξαιρετικά ελαφρύ πέλμα για να εξασφαλιστεί το μέγιστο επίπεδο απόδοσης. Το Planar 8 συνοδεύεται από το νέο R8880 και το Neo PSU ως στάνταρ που προσφέρει ηλεκτρονική αλλαγή ταχύτητας, προηγμένο έλεγχο κατά των κραδασμών και ρυθμιζόμενη από τον χρήστη ηλεκτρονική λεπτή ρύθμιση ταχύτητας για να εξασφαλιστεί η ολική ακρίβεια και ο έλεγχος του κινητήρα. Το εξωτερικό πλαίσιο του προηγούμενου μοντέλου έχει πλέον αφαιρεθεί και έχει εισαχθεί ένα νέο, κομψό, αφαιρούμενο, κάλυμμα σκόνης ενιαίου τεμαχίου, μειώνοντας περαιτέρω τη συνολική μάζα του πικάπ. Σημείωση: Το νέο μικρότερο αποτύπωμα του Planar 8 δεν ταιριάζει στο τρέχον στήριγμα τοίχου του περιστρεφόμενου δίσκου Rega. Έχουμε αναπτύξει ένα νέο ελαφρύ custom Wall Planar 8 για αυτό το μοντέλο.

The Planar 10 was inspired by the ultimate Rega turntable, the Naiad. Built around our ultra-light skeletal plinth, constructed from Tancast 8 core and covered in a high-pressure laminate (HPL) skin. The Planar 10 is the first production turntable to use ceramic bracing which provides the ultimate rigid surface for mounting the precision reference RB3000 tonearm and custom central bearing assembly. The Planar 10 is also fitted with a bespoke ceramic oxide platter which is diamond cut during manufacture for ultimate accuracy and speed stability. The Rega 24 V synchronous motor is controlled by our most advanced outboard power supply, the P10-PSU. This supply delivers the ultimate in motor vibration reduction, electronic fine speed adjustment and the convenience of electronic speed change. The Planar 10 is designed to deliver the ultimate in Rega performance by extracting more information from the vinyl groove than ever before. Key Features RB3000 tonearm Apheta 3 or Aphelion 2 factory fitted (optional) Ceramic Oxide diamond cut platter DB technology with ceramic top brace Tancast 8 foamcore plinth P10 custom matched PSU EBLT Advanced drive belt Lifetime warranty against manufacture defects

Tο νέο Planar 1 είναι το πιο φιλικό προς το χρήστη Rega πικάπ μέχρι σήμερα. Τώρα με ενσωματωμένο phono ,προκαθορισμένο τη δύναμη βάρους, με το ολοκαίνουργιο RB110 βραχίονα,το Planar 1 θα εγκατασταθεί μέσα σε λίγα δευτερόλεπτα μετά την απο-συσκευασία του. Απλώς σύρτε το βάρος στο πίσω μέρος του βραχίονα όσο θα πάει, αφαιρέστε το προστατευτικό της βελόνας και αφήστε να γυρίζει το αγαπημένο σας βινύλιο. Κάθε πτυχή του Planar 1 έχει σχεδιαστεί προσεκτικά για να βελτιώσει τις επιδόσεις του. Για πρώτη φορά η κίνηση γίνετε με ένα 24v, (με χαμηλά επίπεδα θορύβου), σύγχρονο κινητήρα για τη μείωση της μεταφοράς κραδασμών σε συνδυασμό με τον ολοκαίνουργιο βραχίονα RB110 .Είναι εξοπλισμένο με ειδικής παραγγελίας έδρανα απο τη Rega με μηδέν τριβή.

Tο νέο Planar 1 είναι το πιο φιλικό προς το χρήστη Rega πικάπ μέχρι σήμερα. Τώρα με ενσωματωμένο phono ,προκαθορισμένο τη δύναμη βάρους, με το ολοκαίνουργιο RB110 βραχίονα,το Planar 1 θα εγκατασταθεί μέσα σε λίγα δευτερόλεπτα μετά την απο-συσκευασία του. Απλώς σύρτε το βάρος στο πίσω μέρος του βραχίονα όσο θα πάει, αφαιρέστε το προστατευτικό της βελόνας και αφήστε να γυρίζει το αγαπημένο σας βινύλιο. Κάθε πτυχή του Planar 1 έχει σχεδιαστεί προσεκτικά για να βελτιώσει τις επιδόσεις του. Για πρώτη φορά η κίνηση γίνετε με ένα 24v, (με χαμηλά επίπεδα θορύβου), σύγχρονο κινητήρα για τη μείωση της μεταφοράς κραδασμών σε συνδυασμό με τον ολοκαίνουργιο βραχίονα RB110 .Είναι εξοπλισμένο με ειδικής παραγγελίας έδρανα απο τη Rega με μηδέν τριβή.

Το ποιό θρυλικό πικάπ της Rega, πολυβραβευμένου πέντε φορές από το ειδικό περιοδικό What Hi-Fi και προϊόν της χρονιάς (RP3) δεν επρόκειτο ποτέ να είναι ένας εύκολος στόχος για τους ανταγωνιστές μας. Χρειάστηκε μια ομάδα σχεδιαστές με επικεφαλής τον Roy Gandy και δύο χρόνια για να αναπτύξει το ολοκαίνουριο «Rega 3» με νέο σχεδιασμό. Η ομάδα μας έχει εργαστεί ακούραστα για να βελτιώσει κάθε πτυχή αυτού του πικάπ που προσφέρει βελτιωμένη εργονομία, χρηστικότητα και πρώτα απ 'όλα, ηχητικό performance. Το νέο  σας προσφέρει νέο επίπεδο στην ακρόαση.Είναι πραγματικά μια νέα προσέγγιση για πικάπ του 2017Το πικάπ έρχεται χωρίς κεφαλή, επικοινωνήστε μαζί μας για να σας προτείνουμε κεφαλές που ταιριάζουν Χαρακτηριστικά:Πικάπ χειροποίητης κατασκευήςΤεχνολογία Πλατό – Υποπλατό με σύστημα Double Brace για μηδενικούς συντονισμούςΣύγχρονο μοτέρ AC 24V ψυχόμενο και νέα πλακέτα PCB υψηλών προδιαγραφών χαμηλού θορύβουPulley αλουμινίου για μηδενικό θόρυβο και καλύτερη ακρίβεια στροφώνΕιδικό πηγάδι μηδενικών ανοχών (new patent) Φ 11mmΧειροκίνητη επιλογή ταχυτήτων 33 1/3 rpm, 45 rpmΠλατό βελτιωμένης ακριβείας τύπου float glass ‘Optiwhite’ πάχους 12mmΧειροποίητος βραχίονας RB330 μηδενικών τριβών (new patent)Προστατευτικό καπάκι από διάφανο plexiglassΝέου τύπου στήριξη 3 σημείων για τέλεια ηχητική απομόνωσηΕργονομικός διακόπτης On/Off κάτω από το πικάπΔιαθέσιμα φινιρίσματα: Black Gloss, White GlossΔιαστάσεις (W x H x D): 450.0 mm x 117.0 mm x 360.0 mmΒάρος: 7 kg 

The Planar 6 has one goal, to reproduce your vinyl as accurately as possible. We have engineered every aspect of this turntable to extract as much detail from the vinyl surface as possible. Advanced materials and engineering solutions have been used throughout the design to ensure the greatest level of performance.The Neo PSU offers electronic speed change, advanced anti-vibration control and user adjustable electronic fine speed adjustment only found on the RP10 until now. See 'product details' tab below for full information. The Planar 6 will be available with the recommended *Ania MC factory fitted as an attractive package. The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim. The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard. The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable. Key Features: NEO power supply. Super lightweight foam core plinth. Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin. Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim. Upgrade white drive belt fitted as standard. Custom dual layer smoked / clear float glass platter. Single piece aluminium sub platter. Custom machined high precision drive pulley. Patent pending, ultra-low friction central brass hub. Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy. RB330 handmade precision tonearm with custom stainless weight. New high spec Rega 24v low noise synchronous motor – each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control. New smoked dust cover. New aluminium foot trims and Planar style feet. Dimensions Turntable Width 448mm Depth 365mm Height 120mm (Dustcover closed) Weight 5.2kg Dimensions Neo PSU Width 180mm Depth 155m Height 50mm Weight 0.6Kg