Technics

Enter the real vinyl culture with the Technics SL-100C Premium Class Turntable System. Using technologies acquired through the development of the SL-1200 Series and the Reference Class flagship SL-1000R, the SL-100C uses the latest coreless direct drive brushless DC motor provides high-level accuracy in rotation and signal for smooth, stable playback. With an interchangeable pre-installed cartridge, auto-lift function and high-quality, elegant design, the SL-100C is true a hallmark of the Technics tradition.Coreless direct drive brushless DC motor, achieves stable rotation that is free from coggingHighly sensitive S-shaped aluminum tonearm accurately reads record groovesHigh-rigidity cabinet and high-damping insulator for thorough shut-out of vibrations, ensuring a smooth vinyl-tracking processPre-installed Audio-Technica AT-VM95C pickup cartridge for easy setup; interchangeable for upgradesAuto-lift tonearm minimizes needle wear-out and preserves recordsThe Latest Coreless Direct Drive Motor Achieves High- precision Stable RotationThe technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminum die-cast platter to eliminate the rotation irregularity called cogging.Accurately Reads Signals from the Groove on the RecordThe tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. The aluminumdie-cast chassis is rigidly integrated with a special material consisting of ABS-mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics.Equipped with Audiophile-Grade CartridgeThe SL-100C comes preinstalled with an Audio-Technica AT-VM95C cartridge, so you can listen to your favorite tunes in high fidelity with minimal set up. The tone arm height can be easily adjusted within a range of 6 mm, enabling the use of various other phono cartridges.Auto Lifter Minimizes Wear on Records and StylusWhen the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritizes sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.

A collaboration between Technics and Automobili Lamborghini - the SL-1200M7B achieves the highest possible sound quality and wide-ranging DJ functions to expand audio possibilities.As the go-to choice of DJs the world over, the SL-1200 Series offers the SL-1200M7B, a collaboration between Technics and Automobili Lamborghini that brings together the brands’ concepts and sound-making initiatives. Includes a vinyl record featuring the engine sounds of flagship Automobili Lamborghini cars, a slipmat, and stickers with exclusive designs, plus the highest possible sound quality and wide-ranging DJ functions.Two Brands Collaborate in Excellence: The aesthetic & sound of Automobili Lamborghini; Technics' legendary audioAudiophile-grade DJ Turntable: Coreless direct drive motor with a highly sensitive, robust tonearmAutomobili Lamborghini's iconic colors: Arancio Apodis, Verde Shock, and Giallo AthonIncludes vinyl record with the engine sounds of flagship Automobili Lamborghini cars, a slipmat, and stickersThe vinyl itself is a picture disc with an image of a tire from Automobili Lamborghini's latest model, the Revuelto.

A collaboration between Technics and Automobili Lamborghini - the SL-1200M7B achieves the highest possible sound quality and wide-ranging DJ functions to expand audio possibilities.As the go-to choice of DJs the world over, the SL-1200 Series offers the SL-1200M7B, a collaboration between Technics and Automobili Lamborghini that brings together the brands’ concepts and sound-making initiatives. Includes a vinyl record featuring the engine sounds of flagship Automobili Lamborghini cars, a slipmat, and stickers with exclusive designs, plus the highest possible sound quality and wide-ranging DJ functions.Two Brands Collaborate in Excellence: The aesthetic & sound of Automobili Lamborghini; Technics' legendary audioAudiophile-grade DJ Turntable: Coreless direct drive motor with a highly sensitive, robust tonearmAutomobili Lamborghini's iconic colors: Arancio Apodis, Verde Shock, and Giallo AthonIncludes vinyl record with the engine sounds of flagship Automobili Lamborghini cars, a slipmat, and stickersThe vinyl itself is a picture disc with an image of a tire from Automobili Lamborghini's latest model, the Revuelto.

A collaboration between Technics and Automobili Lamborghini - the SL-1200M7B achieves the highest possible sound quality and wide-ranging DJ functions to expand audio possibilities.As the go-to choice of DJs the world over, the SL-1200 Series offers the SL-1200M7B, a collaboration between Technics and Automobili Lamborghini that brings together the brands’ concepts and sound-making initiatives. Includes a vinyl record featuring the engine sounds of flagship Automobili Lamborghini cars, a slipmat, and stickers with exclusive designs, plus the highest possible sound quality and wide-ranging DJ functions.Two Brands Collaborate in Excellence: The aesthetic & sound of Automobili Lamborghini; Technics' legendary audioAudiophile-grade DJ Turntable: Coreless direct drive motor with a highly sensitive, robust tonearmAutomobili Lamborghini's iconic colors: Arancio Apodis, Verde Shock, and Giallo AthonIncludes vinyl record with the engine sounds of flagship Automobili Lamborghini cars, a slipmat, and stickersThe vinyl itself is a picture disc with an image of a tire from Automobili Lamborghini's latest model, the Revuelto.

Technics SH-TB10, base for arms dedicated to the Technics SL-1000R turntable.Available versionsSH-TB10TC1-S Technics EPA-100mk2SH-TB10SM1-S SME M2-9RSH-TB10SM2-S SME M2-12RSH-TB10RT1-S Ortofon AS-212S and RS-212DSH-TB10RT2-S Ortofon AS-309S and RS-309DSH-TB10KD1-S IKEDA IT-345 CR-1SH-TB10KD2-S IKEDA IT-3407 CR-1

Πλήρης ψηφιακός ενισχυτής, JENO Engine (Εξάλειψη jitter και βελτιστοποίηση διαμόρφωσης θορύβου)Το SA-C600 χρησιμοποιεί έναν πλήρως ψηφιακό ενισχυτή που ενσωματώνει τη φημισμένη τεχνολογία ψηφιακού ήχου της Technics. Το ψηφιακό σύστημα μετάδοσης επεξεργάζεται τα σήματα πλήρως ψηφιακά σε όλα τα στάδια από την είσοδο έως την έξοδο. Σε σύγκριση με την αναλογική μετάδοση, το σύστημα αυτό είναι λιγότερο ευαίσθητο στην υποβάθμιση του σήματος που προκαλείται από εξωτερικό θόρυβο, εξασφαλίζοντας ακριβέστερη μετάδοση σήματος. Η ακριβής επεξεργασία σήματος όχι μόνο παρέχει ψηφιακό ήχο υψηλής ανάλυσης, αλλά διατηρεί επίσης την απαλή απόδοση που είναι εγγενής στις αναλογικές ηχογραφήσεις.Σχεδίαση ανεξάρτητης διπλής τροφοδοσίαςH σχεδίαση του τροφοδοτικού είναι εξαιρετικά κρίσιμη σε συστήματα ήχου που περιέχουν συσκευές αναπαραγωγής CD, ενισχυτές, ψηφιακά κυκλώματα και άλλα τέτοια εξαρτήματα. Για να εξαλειφθούν τυχόν δυσμενείς επιπτώσεις στον ενισχυτή, το SA-C600 είναι εξοπλισμένο με ένα αποκλειστικό τροφοδοτικό για τα κυκλώματα του ενισχυτή που είναι ανεξάρτητο από όλα τα άλλα κυκλώματα, τροφοδοτώντας με ρεύμα τους δύο ανεξάρτητους μετασχηματιστές. Οι συνδέσεις καλωδίωσης μεταξύ των δύο ειδικών μετασχηματιστών και των κυκλωμάτων του ενισχυτή είναι επίσης βελτιστοποιημένες για τη μείωση του θορύβου.Καθαρά τροφοδοτούμενη γεννήτρια χρονισμούΤο τροφοδοτικό για το κύκλωμα χρονισμού του JENO Engine χρησιμοποιεί το ίδιο κύκλωμα καταστολής θορύβου που χρησιμοποιείται στο κορυφαίο μοντέλο πικάπ της Technics, το SL-1000R, προκειμένου να βελτιωθεί η μείωση του θορύβου. Παρέχει εξαιρετικά εστιασμένο ήχο και απόδοση ευρείας ηχητικής εικόνας.Ενσωματωμένος προενισχυτής Phono συμβατός με κεφαλές MMΟ ενσωματωμένος προενισχυτής phono υποστηρίζει κεφαλές MM. Ο προενισχυτής phono χρησιμοποιεί ένα ειδικό τροφοδοτικό και είναι εξοπλισμένος με ένα κύκλωμα τροφοδοσίας που είναι διαφορετικό από το κύκλωμα ελέγχου για βελτιωμένη μείωση του θορύβου. Το κύκλωμα του προενισχυτή διαθέτει επίσης θωρακισμένη κατασκευή για να αποκλείει τις επιδράσεις του εξωτερικού θορύβου και επιτρέπει την ενίσχυση του σήματος χωρίς καμία απώλεια πιστότητας.Space Tune™Το SA-C600 είναι εξοπλισμένο με τη λειτουργία Space Tune, η οποία επιτρέπει την προσαρμογή του ήχου στο περιβάλλον και τη θέση της μονάδας, ώστε να μπορεί ο καθένας να απολαμβάνει εξαιρετική αναπαραγωγή μουσικής. Χρησιμοποιώντας την εφαρμογή Technics Audio Centre* για tablet και smartphones ή επιλέγοντας μία από τις τέσσερις προεπιλογές στην κύρια μονάδα - Free, Wall, Corner and Shelf - ο χρήστης μπορεί να επιτύχει την καταλληλότερη αναπαραγωγή ήχου για τη συγκεκριμένη ακουστική του περιβάλλοντα χώρου.Η λειτουργία L/R Custom επιτρέπει στους χρήστες να εισάγουν ξεχωριστές ρυθμίσεις για κάθε ηχείο ξεχωριστά, προσαρμόζοντας την εγκατάσταση σε διαφορετικές συνθήκες και αναδεικνύοντας την καλύτερη ποιότητα ήχου για κάθε περιβάλλον.Σχεδιασμένο για εκλεπτυσμένη εμπειρία ακρόασηςΓια να εξασφαλιστεί η συνοχή της εμφάνισης, η σχεδίαση του SA-C600 ενσωματώνει στοιχεία από τα πικάπ της Technics, όπως το χρώμα, την υφή και τις διαστάσεις, βελτιώνοντας την αισθητική του συστήματος. Το επάνω μέρος από αλουμίνιο διαθέτει ενσωματωμένο CD player με χειροκίνητο καπάκι για ευκολία στη χρήση και λειτουργική ομορφιά.

Πλήρης ψηφιακός ενισχυτής, JENO Engine (Εξάλειψη jitter και βελτιστοποίηση διαμόρφωσης θορύβου)Το SA-C600 χρησιμοποιεί έναν πλήρως ψηφιακό ενισχυτή που ενσωματώνει τη φημισμένη τεχνολογία ψηφιακού ήχου της Technics. Το ψηφιακό σύστημα μετάδοσης επεξεργάζεται τα σήματα πλήρως ψηφιακά σε όλα τα στάδια από την είσοδο έως την έξοδο. Σε σύγκριση με την αναλογική μετάδοση, το σύστημα αυτό είναι λιγότερο ευαίσθητο στην υποβάθμιση του σήματος που προκαλείται από εξωτερικό θόρυβο, εξασφαλίζοντας ακριβέστερη μετάδοση σήματος. Η ακριβής επεξεργασία σήματος όχι μόνο παρέχει ψηφιακό ήχο υψηλής ανάλυσης, αλλά διατηρεί επίσης την απαλή απόδοση που είναι εγγενής στις αναλογικές ηχογραφήσεις.Σχεδίαση ανεξάρτητης διπλής τροφοδοσίαςH σχεδίαση του τροφοδοτικού είναι εξαιρετικά κρίσιμη σε συστήματα ήχου που περιέχουν συσκευές αναπαραγωγής CD, ενισχυτές, ψηφιακά κυκλώματα και άλλα τέτοια εξαρτήματα. Για να εξαλειφθούν τυχόν δυσμενείς επιπτώσεις στον ενισχυτή, το SA-C600 είναι εξοπλισμένο με ένα αποκλειστικό τροφοδοτικό για τα κυκλώματα του ενισχυτή που είναι ανεξάρτητο από όλα τα άλλα κυκλώματα, τροφοδοτώντας με ρεύμα τους δύο ανεξάρτητους μετασχηματιστές. Οι συνδέσεις καλωδίωσης μεταξύ των δύο ειδικών μετασχηματιστών και των κυκλωμάτων του ενισχυτή είναι επίσης βελτιστοποιημένες για τη μείωση του θορύβου.Καθαρά τροφοδοτούμενη γεννήτρια χρονισμούΤο τροφοδοτικό για το κύκλωμα χρονισμού του JENO Engine χρησιμοποιεί το ίδιο κύκλωμα καταστολής θορύβου που χρησιμοποιείται στο κορυφαίο μοντέλο πικάπ της Technics, το SL-1000R, προκειμένου να βελτιωθεί η μείωση του θορύβου. Παρέχει εξαιρετικά εστιασμένο ήχο και απόδοση ευρείας ηχητικής εικόνας.Ενσωματωμένος προενισχυτής Phono συμβατός με κεφαλές MMΟ ενσωματωμένος προενισχυτής phono υποστηρίζει κεφαλές MM. Ο προενισχυτής phono χρησιμοποιεί ένα ειδικό τροφοδοτικό και είναι εξοπλισμένος με ένα κύκλωμα τροφοδοσίας που είναι διαφορετικό από το κύκλωμα ελέγχου για βελτιωμένη μείωση του θορύβου. Το κύκλωμα του προενισχυτή διαθέτει επίσης θωρακισμένη κατασκευή για να αποκλείει τις επιδράσεις του εξωτερικού θορύβου και επιτρέπει την ενίσχυση του σήματος χωρίς καμία απώλεια πιστότητας.Space Tune™Το SA-C600 είναι εξοπλισμένο με τη λειτουργία Space Tune, η οποία επιτρέπει την προσαρμογή του ήχου στο περιβάλλον και τη θέση της μονάδας, ώστε να μπορεί ο καθένας να απολαμβάνει εξαιρετική αναπαραγωγή μουσικής. Χρησιμοποιώντας την εφαρμογή Technics Audio Centre* για tablet και smartphones ή επιλέγοντας μία από τις τέσσερις προεπιλογές στην κύρια μονάδα - Free, Wall, Corner and Shelf - ο χρήστης μπορεί να επιτύχει την καταλληλότερη αναπαραγωγή ήχου για τη συγκεκριμένη ακουστική του περιβάλλοντα χώρου.Η λειτουργία L/R Custom επιτρέπει στους χρήστες να εισάγουν ξεχωριστές ρυθμίσεις για κάθε ηχείο ξεχωριστά, προσαρμόζοντας την εγκατάσταση σε διαφορετικές συνθήκες και αναδεικνύοντας την καλύτερη ποιότητα ήχου για κάθε περιβάλλον.Σχεδιασμένο για εκλεπτυσμένη εμπειρία ακρόασηςΓια να εξασφαλιστεί η συνοχή της εμφάνισης, η σχεδίαση του SA-C600 ενσωματώνει στοιχεία από τα πικάπ της Technics, όπως το χρώμα, την υφή και τις διαστάσεις, βελτιώνοντας την αισθητική του συστήματος. Το επάνω μέρος από αλουμίνιο διαθέτει ενσωματωμένο CD player με χειροκίνητο καπάκι για ευκολία στη χρήση και λειτουργική ομορφιά.

Direct Drive Turntable System SL-1500CThe Latest Coreless Direct Drive Motor Achieves High-precision Stable RotationThe technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.Complete Turntable with a Built-in Phono Equalizer and CartridgeComplete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More ComfortablyWhen the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.Simple Design with Functional BeautyThe SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.　

Direct Drive Turntable System SL-1500CThe Latest Coreless Direct Drive Motor Achieves High-precision Stable RotationThe technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.Complete Turntable with a Built-in Phono Equalizer and CartridgeComplete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More ComfortablyWhen the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.Simple Design with Functional BeautyThe SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.　

Newly Developed Speaker Units & Acoustic Lens The 8-cm woofer unit offers significantly better basic characteristics as a result of various improvements made, such as the reduced weight of the voice coil, enhanced airflow and increased rigidity of the diaphragm. The woofer provides superb response and sound clarity to reproduce mid- and high-frequency sound comfortable to the ear. The high-res-ready 2-cm dome tweeter unit features a lighter silk diaphragm to provide beautiful lingering sound. What’s more, the acoustic lens is optimised for the new tweeter shape and enhances the expansiveness of reproduced sound. 3 JENO Engines In order to faithfully reproduce the information of rich sounds with the 2.1ch configuration, three “JENO Engine” full digital amplifier units have been equipped. In addition to utilising the excellent processing capacity of the three units and faithfully driving the left and right channels and subwoofer, “Space Tune”, which optimises the sound quality depending on the installation status, has been realised. Space Tune™ The SC-C70MK2 features Space Tune™ Auto to achieve optimally balanced sound easily with the press of a button. This function measures test tones played through a mic that is built into the SC-C70MK2 to analyse the distance to walls and the effect of reflections. It then automatically optimises the sound field. In addition, the Space Tune™ function includes 3 presets (Free, Near the Wall, and Near the Corner) for easy setting, and uses a Technics Audio Center app to precisely adjust the sound quality to the listening position. iOS device calibration is available for more precise adjustment Measure room acoustic conditions by using microphone integrated in iOS devices. _x000D_ Tune DSP parameters to optimise acoustic performance. Multi-room With a number of Chromecast built-in speakers, the variety of music streaming services can be played in several rooms, or different music can be played from room to room*. In addition, if you use Technics Audio Center app and have another app compatible Technics devices, you can also enjoy other music source in multi-room such as Bluetooth, AUX, Optical input, USB, Internet radio and also OTTAVA™ f SC-C70MK2 compatible streaming music. * The Google Home App is required. Complete Compatibility In addition to CDs and radio, this model is newly compatible with Chromecast built-in, and supports a wide range of music streaming services. Furthermore, it is also compatible with Spotify Connect, Deezer and Internet radio. It is also compatible AirPlay 2, Bluetooth Wi-Fi, network playback, USB memory playback and analogue/optical input to allow you to enjoy various sound sources with one unit. The UI of our iOS/Android smartphone app, “Technics Audio Center App” has also been redesigned, making it easier to use than ever before. Favourite Function Up to 9 presets can be set on the main unit, such as favourite internet radio stations, a DEEZER playlist, and USB songs. This makes it possible to listen to your favourite music without even starting up an app. Functional beauty that has been further refined Following the elegant design of the previous C70 by combining high sound quality and a sophisticated design. The C70MK2 features a dark silver color to create an even more refined design. Furthermore, an all-black variation has been added.The more you use it, the more your enjoyment of experiencing music will deepen.

Grand Class, High-quality Sound Design The New SL-G700 Network / Super Audio CD Player. The SL-G700 is a multi-digital player that covers most of the digital audio media available today, from traditional CD/SACD to the latest high-res and many streaming services, and plays them all back in the highest possible quality. Premium High-grade D/A Converter and Dual Mono Construction D/A Circuit For analogue audio output, the D/A circuit is one of the most important circuit blocks since it recreates the original analogue waveform from a digital source, such as a CD. For the D/A converters, Asahi Kasei Micro devices’ top-of-the-line DAC AK4497, with their high S/N ratio and low distortion, are isolated for the left and right channels. The power supply for the D/A converters is separated into five sections according to the application, and supplied individually. The power supply for the clock employs an original Battery Driven Circuit System to achieve high-accuracy D/A conversion. The Dual Mono Construction and asymmetrical layout eliminate mutual interference between left and right channels, taking the reproduction of sound imaging and sound space recorded in the source to a higher dimension. Discrete AMP Module For analogue audio output, the filter circuit located after the D/A conversion determines the quality of sound. The SL-G700’s filter circuit incorporates not an Opamp IC but an amp module of original discrete construction. The use of low-noise transistors and thin-film resistors suppresses the noise generated inside the circuits. Detailed fine tuning, such as the increase of operating current, has improved the response, S/N ratio and distortion rate. As result, the SL-G700 provides highly linear and faithful sound reproduction without omitting even the smallest nuances recorded in the source. High-speed Silent Hybrid Power Supply The quality of power supply is extremely important for high-fidelity sound reproduction. Power supply noise and supply stability directly affect the quality of sound reproduced from audio signals, particularly for analogue audio output. The SL-G700 is equipped with a dedicated power supply unit for analogue audio output. Its non-feedback switching power supply suppresses switching frequency fluctuation. Combined with the original stabilised power supply circuit, this dedicated power supply unit provides stable power with low noise. The discrete circuit structure does not use any general-purpose ICs, and meticulous tuning provides power optimised for analogue circuits, thus realising a high S/N ratio and superb reproduction, the hallmark of Technics sound. Four-Section Configuration In Digital Audio Player, there are a variety of circuits, such as Switching Power Supply which has big energy and the Digital Interface Circuit which handling high frequency signal, and also analogue circuit. The SL-G700 uses a Four-Section construction with partitions installed between the circuit blocks according to the signal level handled and circuit type.This eliminates interference between circuit blocks, thus achieving clear sound quality. Also, the chassis rigidity due to this construction suppresses the vibration of electrical parts, thereby suppressing deterioration in sound quality. High-Rigidity Drive Mechanism In the playback of a disc, the reading accuracy determines the sound quality. The CD drive mechanism features a triple chassis structure to ensure accurate reading and to prevent the vibration from transmitting to the outside of the mechanism. Moreover, the SL-G700 has a stable, aluminium die-cast disc tray with a high-vibration-damping, quiet structure to ensure high-accuracy disc playback. Supports a Wide Variety of Music Sources and High Connectivity The SL-G700 supports Bluetooth®, Wi-Fi, and AirPlay 2 with its high wireless connectivity. It is also compatible with streaming services, such as Spotify, TIDAL, and Internet Radio, and functions such as the Google Assistant.* * A Google Voice-activated Speaker must be included in the same network. Compatible music streaming services will be supported sequentially through firmware updates. Network content services are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Some content may not be available in the country in which you reside. Registration/subscription may be required. Fees may apply.

Grand Class, High-quality Sound Design The New SL-G700 Network / Super Audio CD Player. The SL-G700 is a multi-digital player that covers most of the digital audio media available today, from traditional CD/SACD to the latest high-res and many streaming services, and plays them all back in the highest possible quality. Premium High-grade D/A Converter and Dual Mono Construction D/A Circuit For analogue audio output, the D/A circuit is one of the most important circuit blocks since it recreates the original analogue waveform from a digital source, such as a CD. For the D/A converters, Asahi Kasei Micro devices’ top-of-the-line DAC AK4497, with their high S/N ratio and low distortion, are isolated for the left and right channels. The power supply for the D/A converters is separated into five sections according to the application, and supplied individually. The power supply for the clock employs an original Battery Driven Circuit System to achieve high-accuracy D/A conversion. The Dual Mono Construction and asymmetrical layout eliminate mutual interference between left and right channels, taking the reproduction of sound imaging and sound space recorded in the source to a higher dimension. Discrete AMP Module For analogue audio output, the filter circuit located after the D/A conversion determines the quality of sound. The SL-G700’s filter circuit incorporates not an Opamp IC but an amp module of original discrete construction. The use of low-noise transistors and thin-film resistors suppresses the noise generated inside the circuits. Detailed fine tuning, such as the increase of operating current, has improved the response, S/N ratio and distortion rate. As result, the SL-G700 provides highly linear and faithful sound reproduction without omitting even the smallest nuances recorded in the source. High-speed Silent Hybrid Power Supply The quality of power supply is extremely important for high-fidelity sound reproduction. Power supply noise and supply stability directly affect the quality of sound reproduced from audio signals, particularly for analogue audio output. The SL-G700 is equipped with a dedicated power supply unit for analogue audio output. Its non-feedback switching power supply suppresses switching frequency fluctuation. Combined with the original stabilised power supply circuit, this dedicated power supply unit provides stable power with low noise. The discrete circuit structure does not use any general-purpose ICs, and meticulous tuning provides power optimised for analogue circuits, thus realising a high S/N ratio and superb reproduction, the hallmark of Technics sound. Four-Section Configuration In Digital Audio Player, there are a variety of circuits, such as Switching Power Supply which has big energy and the Digital Interface Circuit which handling high frequency signal, and also analogue circuit. The SL-G700 uses a Four-Section construction with partitions installed between the circuit blocks according to the signal level handled and circuit type.This eliminates interference between circuit blocks, thus achieving clear sound quality. Also, the chassis rigidity due to this construction suppresses the vibration of electrical parts, thereby suppressing deterioration in sound quality. High-Rigidity Drive Mechanism In the playback of a disc, the reading accuracy determines the sound quality. The CD drive mechanism features a triple chassis structure to ensure accurate reading and to prevent the vibration from transmitting to the outside of the mechanism. Moreover, the SL-G700 has a stable, aluminium die-cast disc tray with a high-vibration-damping, quiet structure to ensure high-accuracy disc playback. Supports a Wide Variety of Music Sources and High Connectivity The SL-G700 supports Bluetooth®, Wi-Fi, and AirPlay 2 with its high wireless connectivity. It is also compatible with streaming services, such as Spotify, TIDAL, and Internet Radio, and functions such as the Google Assistant.* * A Google Voice-activated Speaker must be included in the same network. Compatible music streaming services will be supported sequentially through firmware updates. Network content services are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Some content may not be available in the country in which you reside. Registration/subscription may be required. Fees may apply.

Coreless Direct Drive Motor The motor that forms the heart of the direct drive turntable is based on the coreless direct drive motor that was developed for the SL-1200G launched in 2016, and further improved. The double coil twin rotor-type coreless direct drive motor that was newly developed for this purpose had coils on both sides for 12-pole, 18-coil drive, with high enough torque to drive the heavyweight-class platter (approximately 7.9-kg). Offsetting the coils on both sides 60 degrees improved the rigidity of the substrate, suppressing fine vibrations and reducing self-inductance. These improvements achieved stable rotation of 0.015% wow and flutter or less, which is considered to be the measurement limit. Also, the thrust bearings supporting the heavyweight-class platter use a special engineering plastic to provide both high rigidity and reliability. Suppressing Unwanted Motor Vibration The motor that was developed for the SL-1200G served as the platform for the direct drive motor. The double coil, reinforced thrust bearings, and a chassis with increased rigidity achieved a stabilised motor with low centre of gravity. By positioning two stainless steel weights with high rigidity and high specific gravity at the bottom of the chassis, the rigidity and low centre of gravity are maintained. These thorough measures to prevent unwanted vibration help to achieve overwhelming rotary precision and improve S/N. Heavyweight-class Turntable Platter The turntable platter positions tungsten weights, which have an extremely high specific weight and are difficult to process, on the outer periphery of a 10-mm-thick brass weight. The brass weight is laminated onto the aluminium die-cast, giving the platter a total weight of approximately 7.9 kg and an inertial mass of approximately 1 ton·cm. A deadening rubber for eliminating unwanted vibration is also attached to the rear surface to form a 3-layer construction and achieve high rigidity and excellent vibration damping characteristics. Separate Control Unit The control unit is separated from the main unit to suppress the effects of unwanted noise on the main unit. In order to achieve a power supply circuit that provides good regulation for high torque, a switching power supply is used. To reduce the noise reaching the pickup, the switching power supply is equipped with a unique technology that provides a voltage supply with minimal noise by a newly developed "unwanted noise reduction circuit". Also, to minimise the noise even during communication, a highly reliable system that resists the effects of external noise is used for communication between the main unit and the control unit. These thorough noise-reduction measures achieve the world's highest-level S/N. Minute Adjustment and Indication of Rotations This turntable supports not only LP (33 1/3 rpm) and EP (45 rpm) analogue records, but also SP (78 rpm). Rotation (rpm) can also be set down to two decimal places (maximum ±16%) from the control unit. The OLED display is also capable of displaying rotation with accuracy down to two decimal places, so the user can both hear and see extremely precise rotation. SP-10MK2 and SP-10MK3 Compatibility In order to enable users to continue using the turntable base and tonearm of systems including the SP-10MK2 and SP-10MK3, the shape and screw positions of the SP-10R base plate are designed to allow mounting onto the SP-10MK2 and SP-10MK3 for complete backward compatibility. The control unit is also the same shape and size as the SP-10MK2 power unit for trouble-free replacement.

Advanced Phase Precision Driver To reproduce music with enhanced spatial sound expressivity requires that the wavefronts of sounds coming from the speaker unit are all aligned when they reach the listener regardless of the listening position. The concept of point sound source is one of the ideal approaches to achieve it. To realise the point sound source reproduction, the coaxial configuration was adopted and then it was combined with the originally shaped Linear Phase Plug for aligning phases and the Smooth Flow Diaphragm formed with a shallow-shape diaphragm and smooth edge shape for minimum sound reflection. The SB-G90M2’s 2-way coaxial speaker unit was newly developed for the reproduction of the mid- to high-frequency range in order to realise the clear sound image localisation and high sound quality to deliver smooth, emotion-rich music, while inheriting the concepts of point sound source and linear phase that Technics pursues relentlessly. Linear Phase Plug The originally shaped acoustic plug is positioned on the front side of the tweeter diaphragm and provides a high-resolution sound reproduction capability and a wide sound stage. The tip of the Linear Phase Plug is made from a high-modulus, high-density brass material. It prevents the plug from vibrating unnecessarily due to the effect of the vibration of the mid-range unit, thus delivering clear and low-distortion sound. Smooth Flow Diaphragm When sound wave propagates along an irregular surface, its wavefront becomes disturbed due to the surface irregularities and results in the degradation of frequency characteristics.This affects particularly the characteristics of high frequencies with short wavelengths. The diaphragm of the mid-range unit, which is part of the coaxial speaker unit, has a shallow shape with a smooth edge to reduce sound reflections so that the disturbance to the sounds radiated from the diaphragm is minimised, resulting in excellent frequency response, phase characteristic and wide directivity. This configuration achieves a wide sound stage and smooth and rich mid- to high-frequency range. Stationary Construction To reproduce the sound of music with a high S/N ratio, sources of all undesirable or unwanted sound have been eliminated completely. To that end, the balanced driver mounting architecture adopted by the previous SB-G90 model was further optimised through the extensive CAE analysis and the speaker mount baffle was newly developed for the secure mounting of the speaker units. In addition, the rigidity of the entire cabinet was strengthened to take advantage of the balanced driver mounting architecture. The strength and shape of each and every one of the parts composing the coaxial speaker was reviewed painstakingly in order to remove unwanted vibrations and noise as completely as possible. What’s more, a sound path structure is provided inside the cabinet. This new and unique structure effectively eliminate standing waves that cause a resonance peak. Balanced Driver Mounting Architecture Unwanted vibrations generated by the speaker mount baffle have been further reduced by improving the vent holes using CAE and by allowing the one-piece woofer amount baffle to penetrate the bottom board for achieving higher rigidity. What’s more, the optimised vent holes improve the distribution of sound radiated from the back sides of speakers for enhanced response. In addition, the coaxial speaker mount baffle is separated from the woofer mount baffle to eliminate the mutual interference. Together, they further enhance the crispness of sound and three dimensional presentation of sound field. Standing Wave Termination Structure A resonance called standing wave is usually generated inside the speaker cabinet by the sound of a certain frequency determined by the cabinet size. The most common method to eliminate the standing wave is to install a sound absorbing material inside the cabinet. However, since sound absorbing material also absorbs sound at frequencies other than the one that generates a standing wave, it somewhat removes dynamism or vividness from the reproduced sound. As a countermeasure, a sound path structure is provided at the bottom of the woofer cabinet to guide the standing waves. Sound absorbing material is installed at the location in the sound path where the speed of sound becomes fastest. This enables the efficient removal of standing waves, which are the cause of resonance peaks, with a minimum amount of sound absorbing material. (Patented) This structure allows the use of all information necessary for accurately reproducing music so the speaker system realises more vivid and natural medium- and low-frequency sound.

Premium Class Audio Player Effectively removes noise to deliver a pure listening experience. Network Audio Player ST-C700D Digital Noise Isolation Architecture Just like the R1 series, the ST-C700 employs a jitter remover, a common mode filter for its LAN input, and a pulse transformer for its digital interface, thus improving the purity of its sound by blocking the entry of external noise. Virtual Battery Operation Virtual Battery Operation reduces noise generated by the power supply circuit by using the reference potential generating circuit for charging the capacitor. Optimally Activated Circuit System The Optimally Activated Circuit System shuts down unneeded digital modules, such as those for display, network, USB and digital interfaces, to minimise the noise generated during playback. Technics Music App for Smartphones The Technics Music App enables you to select a music source and playback equipment, and create playlists easily and comfortably on the screen of a tablet or smartphone. The Music App screen displays the music stored on a connected DLNA-compatible server, content stored on the device running the App, and music files on connected USB memory devices, giving you integrated playback control. Used with the SE-R1 or SU-C700, the Technics Music App not only allows you to control the volume and playback operations, but also lets you adjust the Bass, Mid and Treble levels. High Res Re-master Technics High Res Re-master converts an audio source to a high-resolution signal of up to 192 kHz/32 bits, pushing the effects of any digital noise beyond the audible band, and allowing natural and expressive sound, closer to the original music. Ultra Low Distortion Oversampling Digital Filter The oversampling digital filter incorporating Technics' original algorithm accurately removes the image to the -160 dB level or lower by using an oversampling digital filter, thus reproducing sound rich with spatial expression. High Quality Analog Circuit The ST-C700 uses Technics’ low-noise Digital Noise Isolation Architecture, a high-precision clock, and a high-precision D/A converter (Burr-Brown PCM1795(Texas Instruments)). The analogue circuits use high-quality components for the purest possible sound.

A Heritage of Excellence. Indulge in Superior Sound. Backed by Technics' legendary sound quality, EAH-AZ60 earbuds feature industry-leading noise cancelling, exceptional comfort, and sparkling call clarity for home, work, and travel. Unleash a true high-fidelity sound experience in comfortable earbuds. Technics True Wireless Noise Cancelling Earbuds with Multipoint Bluetooth®, AZ60 Hear Every Detail he unique design of the Technics acoustic chamber, harmonizer, and 8mm drivers delivers exceptionally rich, expansive sound that you don’t just hear, but feel. Supports LDAC™ high resolution wireless audio* for uncompromised sound quality. *Delivered in 96 kHz/24 bit LDAC when connected by Bluetooth®. Speak with Clarity With 8 individual mics and advanced wind noise reduction, EAH-AZ60 transmits your voice clearly on each call; JustMyVoice™ Technology* isolates and amplifies words and minimizes surrounding noise. *Feature under continuous development; varying environmental conditions may affect performance. Immerse Yourself in Sound With industry-leading* noise cancelling, EAH-AZ60 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for truly high-fidelity listening. *As of Aug. 14, 2021, According to research by Panasonic Corporation, measured using JEITA-compliant guidelines in the True Wireless style noise cancelling headphones market. Comfort Fit for Your Every Move Compact, lightweight earbuds fit snugly and comfortably; 7 sizes of silicone earpieces (XS1, XS2, S1, S2, M, L, and XL) give a customizable fit and ensure immersive sound with IPX4 water resistance*. *Only the earbuds are compatible with the IPX4 equivalent. It does not include the charging cradle. Control the Sound Around You Natural Ambient Mode Natural ambient mode comprehensively captures voices and other surrounding sounds, leading to a more natural sound similar to not wearing headphones at all. Captures wide range of sound from low to high frequencies. Attention Mode Attention mode reduces unwanted external noise to make it easier to hear people‘s voices. It’s perfect when you need to hear airport announcements, etc. Personalized Your Sound for All-Day Wear Technics Audio Connect App* New Technics Audio Connect app* makes pairing easy, helps tailor noise cancelling and sound mode settings to your exact specifications, and assists in finding your headphones. *Compatible with smartphones and tablets that are equipped with Android™ 6.0 or higher and that support Google Play, or an iPhone®, iPad® and iPod Touch® equipped with iOS 12 or higher. Long Battery Life Get up to 7 hours on a single charge with ANC on, with a total charge of up to 24 hours in the compact charging case. Quick charge for 70 minutes of playback. Charge and take your earbuds in and out easily from the case. Convenient Functions Bluetooth® Multipoint Pairing Multipoint pairing allows you to be connected to two Bluetooth® devices at the same time. Voice Assistants Activate your preferred voice assistant, Amazon Alexa or Siri® by pressing the earbud’s touch sensor. IPX4 Water Resistance* With IPX4-equivalent water resistance*, sudden showers are not a problem. *Only the earbuds are compatible with the IPX4 equivalent. It does not include the charging cradle. 8 High-performance MEMS microphones Cancel the noise from outside, together with arithmetic processing using software control. In addition, wind noise reduction is structured to suppress air vibrations.

A Heritage of Excellence. Indulge in Superior Sound. Backed by Technics' legendary sound quality, EAH-AZ60 earbuds feature industry-leading noise cancelling, exceptional comfort, and sparkling call clarity for home, work, and travel. Unleash a true high-fidelity sound experience in comfortable earbuds. Technics True Wireless Noise Cancelling Earbuds with Multipoint Bluetooth®, AZ60 Hear Every Detail he unique design of the Technics acoustic chamber, harmonizer, and 8mm drivers delivers exceptionally rich, expansive sound that you don’t just hear, but feel. Supports LDAC™ high resolution wireless audio* for uncompromised sound quality. *Delivered in 96 kHz/24 bit LDAC when connected by Bluetooth®. Speak with Clarity With 8 individual mics and advanced wind noise reduction, EAH-AZ60 transmits your voice clearly on each call; JustMyVoice™ Technology* isolates and amplifies words and minimizes surrounding noise. *Feature under continuous development; varying environmental conditions may affect performance. Immerse Yourself in Sound With industry-leading* noise cancelling, EAH-AZ60 combines Dual Hybrid feedforward & feedback noise cancelling with analog & digital processing for truly high-fidelity listening. *As of Aug. 14, 2021, According to research by Panasonic Corporation, measured using JEITA-compliant guidelines in the True Wireless style noise cancelling headphones market. Comfort Fit for Your Every Move Compact, lightweight earbuds fit snugly and comfortably; 7 sizes of silicone earpieces (XS1, XS2, S1, S2, M, L, and XL) give a customizable fit and ensure immersive sound with IPX4 water resistance*. *Only the earbuds are compatible with the IPX4 equivalent. It does not include the charging cradle. Control the Sound Around You Natural Ambient Mode Natural ambient mode comprehensively captures voices and other surrounding sounds, leading to a more natural sound similar to not wearing headphones at all. Captures wide range of sound from low to high frequencies. Attention Mode Attention mode reduces unwanted external noise to make it easier to hear people‘s voices. It’s perfect when you need to hear airport announcements, etc. Personalized Your Sound for All-Day Wear Technics Audio Connect App* New Technics Audio Connect app* makes pairing easy, helps tailor noise cancelling and sound mode settings to your exact specifications, and assists in finding your headphones. *Compatible with smartphones and tablets that are equipped with Android™ 6.0 or higher and that support Google Play, or an iPhone®, iPad® and iPod Touch® equipped with iOS 12 or higher. Long Battery Life Get up to 7 hours on a single charge with ANC on, with a total charge of up to 24 hours in the compact charging case. Quick charge for 70 minutes of playback. Charge and take your earbuds in and out easily from the case. Convenient Functions Bluetooth® Multipoint Pairing Multipoint pairing allows you to be connected to two Bluetooth® devices at the same time. Voice Assistants Activate your preferred voice assistant, Amazon Alexa or Siri® by pressing the earbud’s touch sensor. IPX4 Water Resistance* With IPX4-equivalent water resistance*, sudden showers are not a problem. *Only the earbuds are compatible with the IPX4 equivalent. It does not include the charging cradle. 8 High-performance MEMS microphones Cancel the noise from outside, together with arithmetic processing using software control. In addition, wind noise reduction is structured to suppress air vibrations.

Coreless Direct Drive Motor Achieving Stable Rotation The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1200MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1200MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record. Diverse New Functions Adapt to Various Playing Styles Torque / Brake Speed Adjustment The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps. The Pitch Control Function The pitch control function allows fine adjustment of the rotation speed within ±8 % / ±16 %. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment. Reverse Play Function The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1200 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported. *The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit. High Sensitive Tonearm The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1200MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching. Stylus Illuminator Featuring a High-brightness and Long-life White LED The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment. Power / Phono Cable Terminals The power and phono cable terminals allow detachment of the cables. The phono terminals are gold-plated to minimise sound quality degradation. Since the terminals allow disconnection of the cables, maintenance of the cables is easier. High-rigidity Cabinet and High-damping Insulator The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Coreless Direct Drive Motor Achieving Stable Rotation The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1210MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1210MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record. Diverse New Functions Adapt to Various Playing Styles Torque / Brake Speed Adjustment The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps. The Pitch Control Function The pitch control function allows fine adjustment of the rotation speed within ±8% / ±16%. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment. Reverse Play Function The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1210 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported. *The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit. High Sensitive Tonearm The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1210MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching. Stylus Illuminator Featuring a High-brightness and Long-life White LED The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment. Power / Phono Cable Terminals The power and phono cable terminals allow detachment of the cables. The phono terminals are gold-plated to minimise sound quality degradation. Since the terminals allow disconnection of the cables, maintenance of the cables is easier. High-rigidity Cabinet and High-damping Insulator The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

Fusing Technics' traditional analogue and leading-edge digital technologies Launched in 2016, the SL-1200G combined Technics‘ traditional analogue technology and advanced digital technology, while redesigning parts throughout. Its outstanding performance literally rocked the hi-fi market and redefined the reference for direct-drive turntables. Parts that were inherited from the SL-1200G were newly developed for the SL-1210GR, beginning with the coreless direct-drive motor and precise motor control technology that eliminated the cogging that originated from rotation irregularity, and including a low-vibration, high-rigidity platter and high-sensitivity tonearm. By these measures, the level of performance clearly outperforms the usual standards of its class. The SL-1210GR invites more audio enthusiasts to enjoy music with the rich, robust sound of analogue records. Coreless Direct-Drive Motor Achieving Stable Rotation In 1970, Technics commercialized the world‘s first direct-drive turntable, and the system took the world by storm. Unlike belt-drive and other systems, direct-drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement. And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1210GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging. High-precision Motor Control for Ideal Rotation Conditions The rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray disc devices, just as that used by the SL-1200G. Sine waves stored in ROM are used for the control waveforms at constant speed, and this achieves smoother and more stable rotation compared with using the simple sine wave generation with an external coil as in the conventional SL-1200MK5. In addition, the electrical circuitry has had tuning performed so that the newly developed motor of the SL-1210GR achieves maximum performance. The starting torque achieves 2.2 kg x cm with only a single rotor. The same startup time of 0.7 s (at 33 1/3 rpm) as the SL-1200G has been achieved. Pursuing Rigidity and Vibration Damping Characteristics The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound. To increase the inertial mass and reduce vibration, the shape of the aluminium die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1210GR platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5. Tonearm Achieving High Initial-Motion Sensitivity The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe. With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced. In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell)) High-quality Terminals for Both Sound and Appearance The turntable uses gold-plated phono terminals for detachable cables, and so a wide variety of cables can be selected. Also, the use of metal shielding construction inside the case reduces the effects of external noise. High-rigidity Body and High-damping Silicon Insulators for Smooth Sound and Isolation from Various Vibrations The SL-1210GR ensures high rigidity by using a body with a two-layered construction solidly unifying the BMC and the aluminium die-cast chassis. For the insulators supporting the body, as with the SL-1200G, the SL-1210GR uses special silicon rubber that ensures both high vibration damping characteristics and long-term reliability. Vibration in the horizontal direction is absorbed by reinforcement with cylindrical tubes using microcell polymers. While inheriting the technology of the SL-1200G, the insulators have had tuning performed specifically for the SL-1210GR. Also, the installation section of the insulators is equipped with a vertical adjustment mechanism using screws. This eliminates the rattle that occurs when the turntable is installed in a rack or the like, and prevents unwanted vibration. In addition, exact horizontal adjustment of the platter and record surface reduces rotation irregularity due to slanting, thereby enabling more stable record playing.

Fusing Technics' traditional analogue and leading-edge digital technologies Launched in 2016, the SL-1200G combined Technics‘ traditional analogue technology and advanced digital technology, while redesigning parts throughout. Its outstanding performance literally rocked the hi-fi market and redefined the reference for direct-drive turntables. Parts that were inherited from the SL-1200G were newly developed for the SL-1200GR, beginning with the coreless direct-drive motor and precise motor control technology that eliminated the cogging that originated from rotation irregularity, and including a low-vibration, high-rigidity platter and high-sensitivity tonearm. By these measures, the level of performance clearly outperforms the usual standards of its class. The SL-1200GR invites more audio enthusiasts to enjoy music with the rich, robust sound of analogue records. Coreless Direct-Drive Motor Achieving Stable Rotation In 1970, Technics commercialized the world‘s first direct-drive turntable, and the system took the world by storm. Unlike belt-drive and other systems, direct-drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement. And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging. High-precision Motor Control for Ideal Rotation Conditions The rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray disc devices, just as that used by the SL-1200G. Sine waves stored in ROM are used for the control waveforms at constant speed, and this achieves smoother and more stable rotation compared with using the simple sine wave generation with an external coil as in the conventional SL-1200MK5. In addition, the electrical circuitry has had tuning performed so that the newly developed motor of the SL-1200GR achieves maximum performance. The starting torque achieves 2.2 kg x cm with only a single rotor. The same startup time of 0.7 s (at 33 1/3 rpm) as the SL-1200G has been achieved. Pursuing Rigidity and Vibration Damping Characteristics The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound. To increase the inertial mass and reduce vibration, the shape of the aluminium die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1200GR platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5. Tonearm Achieving High Initial-Motion Sensitivity The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe. With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced. In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell)) High-quality Terminals for Both Sound and Appearance The turntable uses gold-plated phono terminals for detachable cables, and so a wide variety of cables can be selected. Also, the use of metal shielding construction inside the case reduces the effects of external noise. High-rigidity Body and High-damping Silicon Insulators for Smooth Sound and Isolation from Various Vibrations The SL-1200GR ensures high rigidity by using a body with a two-layered construction solidly unifying the BMC and the aluminium die-cast chassis. For the insulators supporting the body, as with the SL-1200G, the SL-1200GR uses special silicon rubber that ensures both high vibration damping characteristics and long-term reliability. Vibration in the horizontal direction is absorbed by reinforcement with cylindrical tubes using microcell polymers. While inheriting the technology of the SL-1200G, the insulators have had tuning performed specifically for the SL-1200GR. Also, the installation section of the insulators is equipped with a vertical adjustment mechanism using screws. This eliminates the rattle that occurs when the turntable is installed in a rack or the like, and prevents unwanted vibration. In addition, exact horizontal adjustment of the platter and record surface reduces rotation irregularity due to slanting, thereby enabling more stable record playing.

Coreless Direct Drive Motor Conventional analogue turntables have problems with degradation in sound quality caused by factors such as minute speed vibration during rotation and rotation irregularity called “cogging.” In the SL-1200G, the use of a newly developed coreless direct-drive motor with no iron core eliminates cogging. Also, the twin-rotor construction reduces the bearing load while maintaining high torque and also reduces minute vibration during rotation. These factors enable reproduction of the warm, exquisitely detailed sound etched on analogue records. High-precision Motor Control Technology The application of motor control technology developed for Blu-ray devices and switching the drive mode depending on the operational status of the motor achieve a high-starting torque and highspeed stability. Three-layered Turntable Platter The turntable has a three-layered construction with a rigidly combined brass and aluminium die-cast platter. With a deadening rubber covering its entire rear surface to eliminate unnecessary resonance, thereby achieving high rigidity and vibration damping. This delivers smooth rotational stability and inertial mass surpassing the SP-10MK2, the direct-drive turntable standard used by broadcast stations worldwide, as well as having more than twice the inertial mass of the SL-1200MK5. High-level Balance Adjustment When the weight distribution of the turntable is uneven, excess vibration or noise occurs during rotation, which causes degradation in sound quality. Therefore, the balance of the turntable is adjusted at the factory by using specialized high-precision balance adjustment equipment for each and every item after the turntable is assembled. Turntables that have undergone adjustment are labelled with a sticker reading “BALANCED” to indicate that adjustment has been done. High-sensitive Tonearm The tonearm employs lightweight magnesium which has a high damping effect, with cold drawing improving the characteristics of the material and achieving the high-precision required. In addition, high initial-motion sensitivity is attained by employing the traditional Technics gimbal suspension construction with horizontal rotation axis and the vertical rotation axis intersecting at a single central point, as well as high-precision bearings using a cut-processed housing. Four-layered Cabinet Construction A hairline-processed, 10-mm-thick top panel of immaculate aluminium has been added to the previous three-layered construction of aluminium die-cast, BMC, and heavyweight-class rubber on the SL-1200MK5. This four-layered construction combines high rigidity with a high-quality finish and feel. High-quality Terminals The use of brass-milled, gold-plated phono terminals and ground terminals prevent degradation in sound quality while enabling the easy attaching and detaching of cables. Also the use of metal shielding construction inside the case reduces the effects of external noise.

Coreless Direct Drive Motor Conventional analogue turntables have problems with degradation in sound quality caused by factors such as minute speed vibration during rotation and rotation irregularity called "cogging." In the SL-1200G, the use of a newly developed coreless direct-drive motor with no iron core eliminates cogging. Also, the twin-rotor construction reduces the bearing load while maintaining high torque and also reduces minute vibration during rotation. These factors enable reproduction of the warm, exquisitely detailed sound etched on analogue records. High-precision Motor Control Technology The application of motor control technology developed for Blu-ray devices and switching the drive mode depending on the operational status of the motor achieve a high-starting torque and high-speed stability. Three-layered Turntable Platter The turntable has a three-layered construction with a rigidly combined brass and aluminium die-cast platter. With a deadening rubber covering its entire rear surface to eliminate unnecessary resonance, thereby achieving high rigidity and vibration damping. This delivers smooth rotational stability and inertial mass surpassing the SP-10MK2, the direct-drive turntable standard used by broadcast stations worldwide, as well as having more than twice the inertial mass of the SL-1200MK5. High-level Balance Adjustment When the weight distribution of the turntable is uneven, excess vibration or noise occurs during rotation, which causes degradation in sound quality. Therefore, the balance of the turntable is adjusted at the factory by using specialized high-precision balance adjustment equipment for each and every item after the turntable is assembled. Turntables that have undergone adjustment are labelled with a sticker reading "BALANCED" to indicate that adjustment has been done. High-sensitive Tonearm The tonearm employs lightweight magnesium which has a high damping effect, with cold drawing improving the characteristics of the material and achieving the high-precision required. In addition, high initial-motion sensitivity is attained by employing the traditional Technics gimbal suspension construction with horizontal rotation axis and the vertical rotation axis intersecting at a single central point, as well as high-precision bearings using a cut-processed housing. Four-layered Cabinet Construction A hairline-processed, 10-mm-thick top panel of immaculate aluminium has been added to the previous three-layered construction of aluminium die-cast, BMC, and heavyweight-class rubber on the SL-1200MK5. This four-layered construction combines high rigidity with a high-quality finish and feel. High-quality Terminals The use of brass-milled, gold-plated phono terminals and ground terminals prevent degradation in sound quality while enabling the easy attaching and detaching of cables. Also the use of metal shielding construction inside the case reduces the effects of external noise.

Direct Drive Turntable System SL-1000R. Coreless Direct Drive Motor The motor that forms the heart of the direct drive turntable is based on the coreless direct drive motor that was developed for the SL-1200G launched in 2016, and further improved. The double coil twin rotor-type coreless direct drive motor that was newly developed for this purpose had coils on both sides for 12-pole, 18-coil drive, with high enough torque to drive the heavyweight-class platter (approximately 7.9-kg). Offsetting the coils on both sides 60 degrees improved the rigidity of the substrate, suppressing fine vibrations and reducing self-inductance. These improvements achieved stable rotation of 0.015% wow and flutter or less, which is considered to be the measurement limit. Also, the thrust bearings supporting the heavyweight-class platter use a special engineering plastic to provide both high rigidity and reliability. Suppressing Unwanted Motor Vibration The motor that was developed for the SL-1200G served as the platform for the direct drive motor. The double coil, reinforced thrust bearings, and a chassis with increased rigidity achieved a stabilised motor with low centre of gravity. By positioning two stainless steel weights with high rigidity and high specific gravity at the bottom of the chassis, the rigidity and low centre of gravity are maintained. These thorough measures to prevent unwanted vibration help to achieve overwhelming rotary precision and improve S/N. Heavyweight-class Turntable Platter The turntable platter positions tungsten weights, which have an extremely high specific weight and are difficult to process, on the outer periphery of a 10-mm-thick brass weight. The brass weight is laminated onto the aluminium die-cast, giving the platter a total weight of approximately 7.9 kg and an inertial mass of approximately 1 ton·cm. A deadening rubber for eliminating unwanted vibration is also attached to the rear surface to form a 3-layer construction and achieve high rigidity and excellent vibration damping characteristics. Separate Control Unit The control unit is separated from the main unit to suppress the effects of unwanted noise on the main unit. In order to achieve a power supply circuit that provides good regulation for high torque, a switching power supply is used. To reduce the noise reaching the pickup, the switching power supply is equipped with a unique technology that provides a voltage supply with minimal noise by a newly developed "unwanted noise reduction circuit". Also, to minimise the noise even during communication, a highly reliable system that resists the effects of external noise is used for communication between the main unit and the control unit. These thorough noise-reduction measures achieve the world's highest-level S/N. Minute Adjustment and Indication of Rotations This turntable supports not only LP (33 1/3 rpm) and EP (45 rpm) analogue records, but also SP (78 rpm). Rotation (rpm) can also be set down to two decimal places (maximum ±16%) from the control unit. The OLED display is also capable of displaying rotation with accuracy down to two decimal places, so the user can both hear and see extremely precise rotation. High-sensitivity Tonearm To enable the tonearm to precisely track the record's rotation, Technics has traditionally used the static balance, S-type universal tonearm with a lightweight, high damping magnesium tonearm pipe. The gimbal suspension construction tonearm uses high-precision bearings. Highly skilled Japanese craftsmen handle all assembly and adjustment to achieve a high initial-motion sensitivity to precisely trace the grooves cut into the records. OFC is used for internal wiring, so the music signal relayed from the cartridge is not dampened and the musical energy cut into the record is not lost, thereby producing highly vivid sounds. Tonearm Base The tonearm base, to which the tonearm is mounted, is strongly integrated with the turntable part. Comparing the turntable base part with the tonearm mounting construction, the relationship of the tonearm bearings, turntable bearings, and needle position is always constant, providing a structure in which the vibration caused by the rigidity of the turntable base materials has minimal effect, and the tonearm performance is maximized. An optional tonearm base can also be purchased, enabling, in addition to the standard tonearm, an existing short or long-type tonearm from SME or Ortofon to be mounted (up to three including the standard tonearm). High-quality Terminal A gold-plated 5-Pin DIN terminal is used, enabling the user to select the desired PHONO cable. An integrated, machined, high-rigidity aluminum housing also suppresses external noise from reaching the pickup. A Rigid Cabinet and High Damping Silicon Insulator The cabinet has a 2-layer construction consisting of BMC (bulk molding compound) and a 30-mm-thick aluminium top panel. The turntable part is a 3-layer construction comprising BMC, aluminium die-cast, and a 25-mm-thick aluminium top panel. This gives the system a construction of 5 layers of different materials to ensure sufficient rigidity. The insulator that supports the cabinet is a special silicon rubber that combines high vibration damping characteristics and long-term reliability. Reinforcement with a cylindrical tube made of a microcell polymer absorbs vibrations in the horizontal direction. These parts are contained in a zinc die-cast housing with high specific gravity, for isolation from external vibrations.

Πλήρως ψηφιακός ενισχυτής, Επεξεργαστής JENO Engine(Εξάλειψη jitter και βελτιστοποίηση διαμόρφωσης θορύβου)O SU-GX70 χρησιμοποιεί έναν πλήρως ψηφιακό ενισχυτή που ενσωματώνει τη φημισμένη τεχνολογία ψηφιακού ήχου της Technics. Το ψηφιακό σύστημα μετάδοσης επεξεργάζεται τα σήματα πλήρως ψηφιακά σε όλα τα στάδια από την είσοδο έως την έξοδο. Σε σύγκριση με την αναλογική μετάδοση, το σύστημα αυτό είναι λιγότερο ευαίσθητο στην υποβάθμιση του σήματος που προκαλείται από εξωτερικό θόρυβο, εξασφαλίζοντας ακριβέστερη μετάδοση. Η ακριβής επεξεργασία σήματος όχι μόνο παρέχει ψηφιακό ήχο υψηλής ανάλυσης, αλλά διατηρεί επίσης τον απαλό ήχο που παράγουν οι αναλογικές ηχογραφήσεις.Επιπλέον, έχει χρησιμοποιηθεί ο επεξεργαστής JENO Engine στο HDMI ARC (Audio Return Channel), το οποίο έχει εγκατασταθεί για πρώτη φορά σε προϊόν της Technics. Αυτό συμβάλλει στη μείωση οποιασδήποτε υποβάθμισης της ποιότητας του ήχου που προκαλείται από το jitter κατά τη μετάδοση των ψηφιακών σημάτων ήχου (S/PDIF), εξασφαλίζοντας απαράμιλλα επίπεδα ευκρίνειας στον τηλεοπτικό ήχο.Ιδανική παλμική απόκριση μέσω LAPC (Βαθμονόμηση φάσης προσαρμογής φορτίου)Η αντίσταση των ηχείων αλλάζει με κάθε συχνότητα και απαιτείται ένας ενισχυτής ισχύος για την οδήγηση των ηχείων ώστε να μην επηρεάζεται από τα χαρακτηριστικά του ηχείου. Ωστόσο, οι συμβατικοί ψηφιακοί ενισχυτές συνδέονται με τα ηχεία μέσω ενός χαμηλοπερατού φίλτρου στο στάδιο εξόδου, οπότε επηρεάζονται ακόμη πιο έντονα από τα χαρακτηριστικά της αντίστασης των ηχείων. Επιπρόσθετα, αν και τα χαρακτηριστικά πλάτους των συμβατικών ενισχυτών λόγω αρνητικής ανάδρασης βελτιώθηκαν, τα χαρακτηριστικά φάσης δεν μπόρεσαν να βελτιωθούν.Έτσι, αναπτύξαμε έναν αλγόριθμο προσαρμοζόμενης βελτιστοποίησης της σύνθετης αντίστασης των ηχείων, ο οποίος πραγματοποιεί διόρθωση της ιδανικής κρουστικής απόκρισης μέσω ψηφιακής επεξεργασίας σήματος, μετρώντας τα χαρακτηριστικά πλάτους-φάσης συχνότητας του ενισχυτή με τα συνδεδεμένα ηχεία. Αυτή η τεχνική επιτρέπει την εξομάλυνση των χαρακτηριστικών συχνότητας του πλάτους και της φάσης, η οποία δεν είχε επιτευχθεί προηγουμένως από τους ενισχυτές, ενώ παράλληλα παρέχει έναν ήχο με πλούσια έκφραση.Σχεδίαση ανεξάρτητης διπλής τροφοδοσίαςH σχεδίαση του τροφοδοτικού είναι εξαιρετικά σημαντική σε συστήματα ήχου που περιέχουν ενισχυτές, ψηφιακά κυκλώματα και άλλα παρόμοια εξαρτήματα. Για να εξαλειφθούν τυχόν δυσμενείς επιπτώσεις στον ενισχυτή, o SU-GX70 είναι εξοπλισμένο με αποκλειστικό τροφοδοτικό για τα κυκλώματα του τελικού ενισχυτή, το οποίο είναι ανεξάρτητο από όλα τα άλλα κυκλώματα. Ως εκ τούτου, οι ίδιοι ηλεκτρολυτικοί πυκνωτές που είναι εγκατεστημένοι σε μοντέλα υψηλών προδιαγραφών έχουν χρησιμοποιηθεί στο τροφοδοτικό του ειδικού ενισχυτή και στα εξαρτήματα του ενισχυτή ισχύος.O SU-GX70 χρησιμοποιεί ένα τροφοδοτικό υψηλής ταχύτητας μεταγωγής περίπου 130 kHz. Με την αύξηση της συχνότητας μεταγωγής, μειώνονται οι παρεμβολές θορύβου στο εύρος ζώνης αναπαραγωγής μουσικής. Αυτό επιτρέπει την παροχή ενέργειας με υψηλή απόκριση για τα μουσικά σήματα και σημαντική δυνατότητα οδήγησης ηχείων.Ήχος υψηλής ποιότητας μέσω εξόδου βίντεο HDMI χαμηλής παρεμβολήςΓια να μπορέσει o SU-GX70 να λάβει σήματα ήχου μέσω του HDMI ARC (Audio Return Channel), λόγω των προδιαγραφών, πρέπει πρώτα να εξέλθουν σήματα βίντεο από τον SU-GX70. Ωστόσο, η έξοδος αυτών των σημάτων μπορεί να προκαλέσει ανεπιθύμητο θόρυβο.Ως εκ τούτου, τα σήματα βίντεο εξάγονται από τον SU-GX70 με χαμηλότερο ρυθμό και η ψηφιακή τιμή του χρώματος κάθε pixel ρυθμίζεται στο μηδέν. Αυτό διασφαλίζει λειτουργία χαμηλού φορτίου μεταξύ του πομπού και του δέκτη HDMI, αποτρέποντας οποιαδήποτε ανεπιθύμητη δημιουργία θορύβου από τα σήματα βίντεο. Αυτό μειώνει επίσης τυχόν επιπτώσεις στην ποιότητα του ήχου. Επιπλέον, η μετάδοση των σημάτων από την τηλεόραση στoν επεξεργαστή JENO Engine μέσω της συντομότερης δυνατής διαδρομής ελαχιστοποιεί κάθε περαιτέρω επίπτωση από το jitter. Αυτός είναι ένας μηχανισμός που κατέχει μόνο η Panasonic/Technics ως δικαιοπάροχος HDMI.Λειτουργία καθαρής ενίσχυσης (Pure Amplification)Στη λειτουργία Pure Amplification (Καθαρή ενίσχυση), η διακοπή της τροφοδοσίας ρεύματος στα κυκλώματα δικτύου και HDMI απομακρύνει κάθε θόρυβο από τη συσκευή ή την κεραία. Αυτό εξασφαλίζει αναπαραγωγή μουσικής με ακόμη καλύτερη ευκρίνεια.*Τα κυκλώματα δικτύου και HDMI μπορούν επίσης να απενεργοποιηθούν μεμονωμένα.Αναλογική είσοδος με χρήση κυκλωμάτων διακριτών ενισχυτώνΤο κύκλωμα του διακριτού ενισχυτή που χρησιμοποιείται στον SU-GX70 επανασχεδιάστηκε και προσαρμόστηκε από το κύκλωμα που χρησιμοποιήθηκε στον SU-R1000 και χρησιμοποιήθηκε η ίδια συμμετρική διάταξη.Επιπλέον, έχουν υιοθετηθεί και άλλα εξαρτήματα ήχου της ίδιας υψηλής ποιότητας με αυτά που χρησιμοποιούνται στον SU-R1000, όπως FET χαμηλού θορύβου, αντιστάσεις λεπτού φιλμ, πυκνωτές φιλμ και ηλεκτρολυτικοί πυκνωτές. Με αυτόν τον τρόπο, η συσκευή έχει ρυθμιστεί προσέχοντας κάθε λεπτομέρεια.

Speaker System SB-C700 Realises high transparency and a precise sound image, building on our linear-phase, point-sound-source concept. Point Sound Source Speaker System Technics’ newly developed flat coaxial two-way speaker unit combines a tweeter for high frequencies and a woofer for mid-range and bass. Because the tweeter is at the centre of the woofer, the speaker acts as a point sound source, providing a coherent, integrated sound across the frequency range, without directional anomalies. As a result, the Technics Speaker System deliver a live superb soundstage focus, excellent imaging and the ambience required to deliver the ‘live music’ experience. Phase Precision Driver (Flat Coaxial 2-Way Speaker Unit) The flat coaxial two-way speaker drive unit is an original Technics development, designed for the faithful reproduction of mid-range and high-frequency sound. The flat woofer diaphragm has a sandwich-structure using lightweight, high-rigidity carbon fibre skins and a honeycomb core, and is designed for a highly accurate pistonic motion over a frequency range extending beyond the crossover frequency with the tweeter, thus ensuring smooth integration. The flat design eliminates the frequency anomalies due to the cavity effect caused by conventional cone diaphragms, while the magnetic circuit employs a large magnet, copper cap and shorting ring, and a short voice coil with concentrated edgewise winding for high power with low distortion. The drive unit chassis is in highly rigid die-cast aluminium, with the chassis ‘legs’ having a resonance dispersing structure to eliminate even the smallest unwanted vibration, to help the drive unit deliver accurate and powerful bass. High Rigidity Entasis Form Cabinet The SB-C700 cabinet is designed to support the Point Source drive units securely, preventing unwanted resonance and ensuring a smooth flow of sound without diffraction or reflection. The front baffle is designed for maximum stiffness and resonance-damping, while the side panels are convex high-rigidity boards with a maximum 42-mm thickness, designed to damp down resonance while also preventing internal reflections. The monocoque cabinet offers high rigidity, as each side of the cubic structure reinforces the adjacent panels. This reduces unwanted resonance by controlling the movement of the individual panels, as well as that of the structure as a whole, while internal acoustic absorbent material was selected, and its position optimised, to suit both a drive unit and the cabinet volume, thus suppressing undesired standing waves. The bass reflex port on the rear panel is of a ‘parabola’ design, its curvature continuously varying from the inlet to the outlet to suppress turbulence at the exit as well flow-noise within the port, thus delivering smooth and powerful bass sound with minimum noise. The glossy cabinet is created by repeated coating, sanding, polishing and finishing with a high degree of craftsmanship. This creates a cabinet not just attractive to look at, but also able to suppress fine vibrations generated at the enclosure surface, thus contributing to the accuracy of its sound. High Quality Network Circuit The High-quality Network Circuit was created as a result of extensive designing and listening, in order to maximise the performance of each speaker unit and achieve a balanced sound. To prevent interference between the drive units and minimise the effect of vibration, separate network boards for woofer and tweeter are optimally arranged inside the cabinet. Ultra Wide Range Reproduction The Technics Speaker System is capable of reproducing sound over the ultra-wide frequency range of up to 100 kHz to deliver the vast frequency spectrum offered by high-quality, high-resolution music sources. The result is a faithful reproduction of audio signals with all nuances intact.

Speaker System SB-C700 Realises high transparency and a precise sound image, building on our linear-phase, point-sound-source concept. Point Sound Source Speaker System Technics’ newly developed flat coaxial two-way speaker unit combines a tweeter for high frequencies and a woofer for mid-range and bass. Because the tweeter is at the centre of the woofer, the speaker acts as a point sound source, providing a coherent, integrated sound across the frequency range, without directional anomalies. As a result, the Technics Speaker System deliver a live superb soundstage focus, excellent imaging and the ambience required to deliver the ‘live music’ experience. Phase Precision Driver (Flat Coaxial 2-Way Speaker Unit) The flat coaxial two-way speaker drive unit is an original Technics development, designed for the faithful reproduction of mid-range and high-frequency sound. The flat woofer diaphragm has a sandwich-structure using lightweight, high-rigidity carbon fibre skins and a honeycomb core, and is designed for a highly accurate pistonic motion over a frequency range extending beyond the crossover frequency with the tweeter, thus ensuring smooth integration. The flat design eliminates the frequency anomalies due to the cavity effect caused by conventional cone diaphragms, while the magnetic circuit employs a large magnet, copper cap and shorting ring, and a short voice coil with concentrated edgewise winding for high power with low distortion. The drive unit chassis is in highly rigid die-cast aluminium, with the chassis ‘legs’ having a resonance dispersing structure to eliminate even the smallest unwanted vibration, to help the drive unit deliver accurate and powerful bass. High Rigidity Entasis Form Cabinet The SB-C700 cabinet is designed to support the Point Source drive units securely, preventing unwanted resonance and ensuring a smooth flow of sound without diffraction or reflection. The front baffle is designed for maximum stiffness and resonance-damping, while the side panels are convex high-rigidity boards with a maximum 42-mm thickness, designed to damp down resonance while also preventing internal reflections. The monocoque cabinet offers high rigidity, as each side of the cubic structure reinforces the adjacent panels. This reduces unwanted resonance by controlling the movement of the individual panels, as well as that of the structure as a whole, while internal acoustic absorbent material was selected, and its position optimised, to suit both a drive unit and the cabinet volume, thus suppressing undesired standing waves. The bass reflex port on the rear panel is of a ‘parabola’ design, its curvature continuously varying from the inlet to the outlet to suppress turbulence at the exit as well flow-noise within the port, thus delivering smooth and powerful bass sound with minimum noise. The glossy cabinet is created by repeated coating, sanding, polishing and finishing with a high degree of craftsmanship. This creates a cabinet not just attractive to look at, but also able to suppress fine vibrations generated at the enclosure surface, thus contributing to the accuracy of its sound. High Quality Network Circuit The High-quality Network Circuit was created as a result of extensive designing and listening, in order to maximise the performance of each speaker unit and achieve a balanced sound. To prevent interference between the drive units and minimise the effect of vibration, separate network boards for woofer and tweeter are optimally arranged inside the cabinet. Ultra Wide Range Reproduction The Technics Speaker System is capable of reproducing sound over the ultra-wide frequency range of up to 100 kHz to deliver the vast frequency spectrum offered by high-quality, high-resolution music sources. The result is a faithful reproduction of audio signals with all nuances intact.

Compact Disc Player SL-C700 Realises accurate and high-quality music reproduction, drawing out the full potential inherent in a music CD. Ultra Low Distortion Oversampling Digital Filter The oversampling digital filter uses Technics' original algorithm to ensure the most accurate conversion of the digital signal. High Res Re-master Technics High Res Re-master converts audio signals to up to 176.4 kHz/32 bits before digital to analogue conversion, allowing a natural and expressive sound. High-Precision Master Clock A clock generated by high-precision crystal operates the CD reading, Audio DSP, and D/A converters to achieve highly precise digital synchronisation, resulting in accurate playback. Independent high-precision Burr-Brown PCM1795 (Texas Instruments) digital to analogue converters are used for each channel. High Quality Analog Circuit A symmetrical analogue layout eliminates interference between the left and right channels, while keeping signal paths as short as possible to prevent signal loss during transmission. High Rigidity Metal Double Chassis To reduce vibration and noise that degrade the purity of sound, the Premium Series features a High Rigidity Metal Double Chassis, using inner and outer steel plates. High Quality Parts The high-quality electrolytic capacitors and film capacitors used in the power supply and audio circuits were carefully selected through listening tests. 1x playback To minimise the noise generated by the mechanisms and motors, the disc is played back at 1x speed, minimising audio-affecting power supply fluctuations.

JENO Engine (Jitter Elimination and Noise-shaping Optimization) In order to faithfully transmit the massive amount of audio data sent to the speakers without loss, the SU-G700M2 power amp section uses full digital amplification employing the JENO Engine, based on the design concept of reference systems. In order to solve the issue of sound quality degradation due to jitter, which poses problems for conventional digital amplifiers, the SU-G700M2 has an original jitter reduction circuit that eliminates jitter over the entire audible frequency range. Also, a unique, high-precision PWM (Pulse Width Modulation) conversion circuit is used for PWM conversion, which is important for sound quality. By optimising items such as the noise-shaping speed, degree, and quantization number through our unique expertise, data even in the wide dynamic range contained in high-resolution sound sources is converted to PWM signals without loss. These technologies provide reproduction of natural and finely detailed sound, enabling perception even of delicate music nuances. LAPC (Load Adaptive Phase Calibration) Speaker impedance changes with each frequency and a power amplifier is required to drive speakers without being affected by the speaker’s characteristics. However, conventional digital amplifiers are connected to speakers through a low-pass filter at the output stage, so they are even more strongly affected by the speaker impedance characteristics. Also, although the amplitude characteristics of conventional amplifiers due to negative feedback were improved, the phase characteristics could not be enhanced. We thus developed a speaker impedance adaptive optimisation algorithm that performs correction to the ideal impulse response through digital signal processing by measuring the frequency amplitude-phase characteristics of the amplifier with the speakers connected. This new technique enables flattening the frequency characteristics of amplitude and phase, which had previously not been achieved by amplifiers, as well as delivering a sound with rich spatial expression. Advanced Speed Silent Power Supply The power supply technology incorporated in the reference-class model SU-R1000 has been employed for improved speaker drive power and a greater feel of energy. The switching frequency has been increased from the conventional 100kHz band to the 400kHz band to ensure stable supply of voltage and current and to reduce adverse effects of modulation noise on the audio quality. The device is equipped with the same GaN FET and SiC SBD as those mounted in the SU-R1000 to deliver maximum performance from the high-speed switching power supply system. What’s more, a Super Low Noise Regulator is provided in the later stage. It prevents the decrease of regulation due to fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a low-noise and high-response power supply that maximises the performance of the digital amplifier. Three-section Configuration In integrated amplifiers there are a variety of circuits, including circuits that handle the micro-signals of inputs and those that handle a large current, such as output circuits and power-supply circuits. The SU-G700M2 uses a three-section construction with partitions installed between the circuit blocks according to the signal level handled. This eliminates interference between circuit blocks, thus achieving clear sound quality. In addition to the three-section construction, the SU-G700M2 comes with a bottom chassis featuring a two-layer construction with 1.2-mm-thick and 2-mm-thick steel plates, a top panel made of a 1.6-mm-thick steel plate and a 7-mm-thick aluminium front panel for improved vibration damping. Low-noise PHONO Input PHONO MC input is now supported. The PHONO input achieves low noise by using a differential parallel connection configuration of a first-stage, low-noise FET. In addition, four-level gain adjustment enables selection of the best gain according to the cartridge output. This enables optimal playback of high-grade analogue recorded sound sources tailored to the user’s environment. Class AA Headphone Amplifier The SU-G700M2 uses a Class AA headphone amplifier with separate amplifier circuits for voltage amplification and current amplification of the audio signal. The voltage is amplified by a high-grade operational amplifier, the current is amplified by an operational amplifier with high current-supply capability, and the high-grade PWM signal output from the JENO Engine is converted to analogue with high precision, thus enabling headphones to be ideally driven. This makes it possible to reproduce music with low distortion and a wide frequency range no matter what the load impedance of the headphones is.

JENO Engine (Jitter Elimination and Noise-shaping Optimization) In order to faithfully transmit the massive amount of audio data sent to the speakers without loss, the SU-G700M2 power amp section uses full digital amplification employing the JENO Engine, based on the design concept of reference systems. In order to solve the issue of sound quality degradation due to jitter, which poses problems for conventional digital amplifiers, the SU-G700M2 has an original jitter reduction circuit that eliminates jitter over the entire audible frequency range. Also, a unique, high-precision PWM (Pulse Width Modulation) conversion circuit is used for PWM conversion, which is important for sound quality. By optimising items such as the noise-shaping speed, degree, and quantization number through our unique expertise, data even in the wide dynamic range contained in high-resolution sound sources is converted to PWM signals without loss. These technologies provide reproduction of natural and finely detailed sound, enabling perception even of delicate music nuances. LAPC (Load Adaptive Phase Calibration) Speaker impedance changes with each frequency and a power amplifier is required to drive speakers without being affected by the speaker’s characteristics. However, conventional digital amplifiers are connected to speakers through a low-pass filter at the output stage, so they are even more strongly affected by the speaker impedance characteristics. Also, although the amplitude characteristics of conventional amplifiers due to negative feedback were improved, the phase characteristics could not be enhanced. We thus developed a speaker impedance adaptive optimisation algorithm that performs correction to the ideal impulse response through digital signal processing by measuring the frequency amplitude-phase characteristics of the amplifier with the speakers connected. This new technique enables flattening the frequency characteristics of amplitude and phase, which had previously not been achieved by amplifiers, as well as delivering a sound with rich spatial expression. Advanced Speed Silent Power Supply The power supply technology incorporated in the reference-class model SU-R1000 has been employed for improved speaker drive power and a greater feel of energy. The switching frequency has been increased from the conventional 100kHz band to the 400kHz band to ensure stable supply of voltage and current and to reduce adverse effects of modulation noise on the audio quality. The device is equipped with the same GaN FET and SiC SBD as those mounted in the SU-R1000 to deliver maximum performance from the high-speed switching power supply system. What’s more, a Super Low Noise Regulator is provided in the later stage. It prevents the decrease of regulation due to fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a low-noise and high-response power supply that maximises the performance of the digital amplifier. Three-section Configuration In integrated amplifiers there are a variety of circuits, including circuits that handle the micro-signals of inputs and those that handle a large current, such as output circuits and power-supply circuits. The SU-G700M2 uses a three-section construction with partitions installed between the circuit blocks according to the signal level handled. This eliminates interference between circuit blocks, thus achieving clear sound quality. In addition to the three-section construction, the SU-G700M2 comes with a bottom chassis featuring a two-layer construction with 1.2-mm-thick and 2-mm-thick steel plates, a top panel made of a 1.6-mm-thick steel plate and a 7-mm-thick aluminium front panel for improved vibration damping. Low-noise PHONO Input PHONO MC input is now supported. The PHONO input achieves low noise by using a differential parallel connection configuration of a first-stage, low-noise FET. In addition, four-level gain adjustment enables selection of the best gain according to the cartridge output. This enables optimal playback of high-grade analogue recorded sound sources tailored to the user’s environment. Class AA Headphone Amplifier The SU-G700M2 uses a Class AA headphone amplifier with separate amplifier circuits for voltage amplification and current amplification of the audio signal. The voltage is amplified by a high-grade operational amplifier, the current is amplified by an operational amplifier with high current-supply capability, and the high-grade PWM signal output from the JENO Engine is converted to analogue with high precision, thus enabling headphones to be ideally driven. This makes it possible to reproduce music with low distortion and a wide frequency range no matter what the load impedance of the headphones is.

A Wide Soundstage from a Compact Body Two 1.6-cm tweeters deliver high-res sound up to 50 kHz. This combines with a front-firing 12-cm long-stroke subwoofer and a straight, large-diameter, long port. A total of 5 units in the rigid, glass fibre reinforced body produce powerful sound from the 2.1-channel amplifier. Accurate and Rich Sound Reproduction The SC-C30 is equipped with three units of Technics’ original JENO Engine (Jitter Elimination and Noise-shaping Optimization) full-digital amp. The JENO Engine drives each speaker unit accurately and powerfully. Furthermore, the impulse response improvement technology, LAPC (Load Adaptive Phase Calibration), realises ideal speaker drive to deliver accurate and information-rich sound. Faithful Sound Reproduction from Bluetooth® and Compressed Audio Sources A technology is utilised that reproduces high-quality sound from compressed audio sources used in streaming music services, Internet radio and Bluetooth®. Technics’ Re-master technology that uses a proprietary algorithm reproduces signals as close to the original audio source as possible, thus eliminating sound quality degradation that normally occurs in the reproduction of audio signals from compressed audio sources. Elegant and Timeless Design The OTTAVA™ S SC-C30 combines practical function with elegant design. The thick aluminium top panel increases the rigidity of the chassis, and the iconic OLED is surrounded by ring keys for easy operation. Rear louvers add further elegance while enhancing the function of an internal heat-reducing mechanism. And the beautiful arc form, which helps to eliminate unwanted vibration and standing wave in the chassis, incorporates acoustic technology to achieve a wide sound stage. This lets you freely place the OTTAVA™ S SC-C30 to suit the listening position. And you can also choose a black or white colour to match your room. Complete Compatibility In addition to USB playback and analogue/optical input, the OTTAVA™ S SC-C30 supports Bluetooth®, AirPlay 2, Chromecast built-in, Spotify, Tidal, Deezer, Internet Radio and Network Playback, allowing comfortable playback of a diverse range of music sources from a single unit. High connectivity also supports multi-room, stereo pairs, and Wi-Fi, as well as iOS and Android control apps. Multi-room and Stereo Pairing With a number of Chromecast built-in speakers, the variety of music streaming services can be played in several rooms, or different music can be played from room to room. (The Google Home App is required.) In addition, if you use Technics Audio Center app and have another app compatible Technics / Panasonic devices, you can also enjoy other music source in multi-room such as Bluetooth, AUX, Optical input, USB, Internet radio and also OTTAVA™ SC-C30 compatible streaming music. If two OTTAVA™ S SC-C30s are arranged and set to stereo, you can enjoy highly ambient stereo sound. Broad selection of streaming services, easy-to-use controls Chromecast built-in Chromecast built-in supports a wide variety of music streaming services for easy casting from a smartphone app. And since the data is streamed directly to the main unit, there is no degradation in sound quality, and the user can select from a diverse range of music. Works with the Google Assistant If a Google Assistant-enabled device is included in the same network, the Google Assistant can be used to operate OTTAVA™ S SC-C30 music playback and other functions. When the user doesn't have a smartphone app in hand, or when hands are full, music can be easily played using just your voice.

A Wide Soundstage from a Compact Body Two 1.6-cm tweeters deliver high-res sound up to 50 kHz. This combines with a front-firing 12-cm long-stroke subwoofer and a straight, large-diameter, long port. A total of 5 units in the rigid, glass fibre reinforced body produce powerful sound from the 2.1-channel amplifier. Accurate and Rich Sound Reproduction The SC-C30 is equipped with three units of Technics’ original JENO Engine (Jitter Elimination and Noise-shaping Optimization) full-digital amp. The JENO Engine drives each speaker unit accurately and powerfully. Furthermore, the impulse response improvement technology, LAPC (Load Adaptive Phase Calibration), realises ideal speaker drive to deliver accurate and information-rich sound. Faithful Sound Reproduction from Bluetooth® and Compressed Audio Sources A technology is utilised that reproduces high-quality sound from compressed audio sources used in streaming music services, Internet radio and Bluetooth®. Technics’ Re-master technology that uses a proprietary algorithm reproduces signals as close to the original audio source as possible, thus eliminating sound quality degradation that normally occurs in the reproduction of audio signals from compressed audio sources. Elegant and Timeless Design The OTTAVA™ S SC-C30 combines practical function with elegant design. The thick aluminium top panel increases the rigidity of the chassis, and the iconic OLED is surrounded by ring keys for easy operation. Rear louvers add further elegance while enhancing the function of an internal heat-reducing mechanism. And the beautiful arc form, which helps to eliminate unwanted vibration and standing wave in the chassis, incorporates acoustic technology to achieve a wide sound stage. This lets you freely place the OTTAVA™ S SC-C30 to suit the listening position. And you can also choose a black or white colour to match your room. Complete Compatibility In addition to USB playback and analogue/optical input, the OTTAVA™ S SC-C30 supports Bluetooth®, AirPlay 2, Chromecast built-in, Spotify, Tidal, Deezer, Internet Radio and Network Playback, allowing comfortable playback of a diverse range of music sources from a single unit. High connectivity also supports multi-room, stereo pairs, and Wi-Fi, as well as iOS and Android control apps. Multi-room and Stereo Pairing With a number of Chromecast built-in speakers, the variety of music streaming services can be played in several rooms, or different music can be played from room to room. (The Google Home App is required.) In addition, if you use Technics Audio Center app and have another app compatible Technics / Panasonic devices, you can also enjoy other music source in multi-room such as Bluetooth, AUX, Optical input, USB, Internet radio and also OTTAVA™ SC-C30 compatible streaming music. If two OTTAVA™ S SC-C30s are arranged and set to stereo, you can enjoy highly ambient stereo sound. Broad selection of streaming services, easy-to-use controls Chromecast built-in Chromecast built-in supports a wide variety of music streaming services for easy casting from a smartphone app. And since the data is streamed directly to the main unit, there is no degradation in sound quality, and the user can select from a diverse range of music. Works with the Google Assistant If a Google Assistant-enabled device is included in the same network, the Google Assistant can be used to operate OTTAVA™ S SC-C30 music playback and other functions. When the user doesn't have a smartphone app in hand, or when hands are full, music can be easily played using just your voice.

4 JENO Engine Four JENO Engines produce optimal performance, with superior sound imaging through subwoofer,　midrange, and tweeter alignment. This achieves excellent tuning and optimises sound spaces to fit　individual listening environments using Space Tune. LAPC LAPC is an original Technics speaker load adaptive technology. It measures the amp's frequency amplitude phase characteristics with speakers connected to the unit, and performs digital signal processing to achieve the ideal impulse response. Characteristic parameters optimised for the low-frequency and high-frequency speaker load characteristics of speakers are already pre-set in the LAPC computation circuit of the unit to realise ideal frequency and phase characteristics over the entire frequency range. Space Tune™ To provide the OTTAVA™ S SC-C50's excellent sound in every room and listening position, Space Tune optimises the listening environment to the sound space. In addition to offering 3 preset modes to suit the mounting location, a microphone built into the main unit enables an Auto function to optimise the sound and an iOS device can also be used to measure and compensate the frequency response with greater precision. This allows the user to enjoy higher sound quality regardless of where the unit is placed. Complete Compatibility In addition to USB playback and analogue/optical input, the OTTAVA™ S SC-C50 supports Bluetooth®, AirPlay 2, Chromecast built-in, Spotify, Tidal, Deezer, Internet Radio and Network Playback, allowing comfortable playback of a diverse range of music sources from a single unit. High connectivity also supports multi-room, stereo pairs, and Wi-Fi, as well as iOS and Android control apps. Elegant and Timeless Design The OTTAVA™ S SC-C50 combines practical function with elegant design. The thick aluminum top panel increases the rigidity of the chassis, and the iconic OLED is surrounded by ring keys for easy operation. Rear louvers add further elegance while enhancing the function of an internal heat-reducing mechanism. And the beautiful arc form, which helps to eliminate unwanted vibration and standing wave in the chassis, incorporates acoustic technology to achieve a wide sound stage. This lets you freely place the OTTAVA™ S SC-C50 to suit the listening position. A Compact Body with a Wide Sound Stage The arc-shaped body houses 3 midranges, 3 tweeters and 1 subwoofer, while left- and right-angled speakers and a centre speaker create rich stereo imaging and crisp vocals. A “directivity-control horn” eliminates mutual speaker interference to achieve wide directivity, and a coaxial midrange and tweeter ensure vertical directivity with less frequency disorder from the compact body. Truly Powerful Architecture Three 1.6-cm tweeters deliver high-res sound up to 50 kHz. This combines with a front-firing 12-cm long-stroke subwoofer and a straight, large-diameter, long port. A total of 7 units in the rigid, glass fiber reinforced body produce powerful sound from the 3.1-channel amplifier. Twin Power Supply Circuit System Regular power supplies use one transformer to supply power to the amp, and digital circuits, and so if there is any load fluctuation or if noise occurs on a circuit, other circuits are affected, which results in degradation of the sound quality. This power supply system includes independently installed switch mode power supply circuitry for the amp and the other circuits, which eliminates mutual interference, thereby reducing degradation of sound quality caused by noise or power supply fluctuations. In addition, a layout with dedicated transformer and amp circuits enables the shortest possible connection to further reduce noise. Broad selection of streaming services, easy-to-use controls Chromecast built-in The Chromecast built-in function supports a wide variety of music streaming services for easy casting from a smartphone app. And since the data is streamed directly to the main unit, there is no degradation in sound quality, and the user can select from a diverse range of music. Works with the Google Assistant If a Google Assistant built-in device is included　in the same network, Google Assistant can be used to operate OTTAVA™ S SC-C50 music playback and other functions. When the user doesn't have a smartphone app in hand, or when hands are full, music can be easily played by voice command. Multi-room and Stereo Pairing* With a number of Chromecast built-in speakers, the variety of music streaming services can be played in several rooms, or different music can be played from room to room. In addition, if you use Technics Audio Center app and have another app compatible Technics devices, you can also enjoy other music source in multi-room such as Bluetooth, AUX, Optical input, USB, Internet radio and also OTTAVA™ S SC-C50 compatible streaming music. If two OTTAVA™ S SC-C50s are arranged and set to stereo, you can enjoy highly ambient stereo sound*. *The Google Home App is required.

JENO Engine Jitter is a major cause of distortion in digital systems, and is caused by mis-timing in the master clocks used in digital-to-analogue conversion. To eliminate the degradation of sound caused by jitter, Technics has developed an original jitter reduction circuit, comprising a clock generator in the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter for suppressing jitter in the high-frequency range. Thus it reduces jitter in an ideal way over the entire frequency range. This works with original high-precision PWM (Pulse Width Modulation) conversion circuit, optimising the noise-shaping speed, the degree and re-quantisation number, and the PWM gradation, in order to convert high-resolution signals to PWM without causing any damage to the dynamic range. These technologies enable Technics digital amplifier designs to reproduce the natural and delicate nuances of music. ADCT (Active Distortion Cancelling Technology) The Active Distortion Cancelling Technology newly developed by Technics accurately extracts and removes distortion in the power output stage which is generated by the speaker’s counter electromotive force and voltage drops. In the Hi-Fi audio market where an unlimited number of audio systems can be configured by combining various products, high-end audio amplifiers need to optimally drive a diversity of speakers. The Active Distortion Cancelling Technology accurately extracts distortion by determining the difference between the speaker terminal output and JENO output and then applies correction to the output digital signal, thus correcting the conventional digital amp system. This provides powerful speaker driving force and acoustic energy while offering the superior benefits of a digital amplifier, such as low noise, precise sound image and expansive sound ambience, regardless of the types of connected speakers. Advanced Speed Silent Power Supply The SU-R1000 uses a switching power supply system to ensure a stable supply of voltage and current required by the digital amp. In a conventional switching power supply system, the ON time of the switching operation was controlled in order to stabilise the voltage, and this causes the switching frequency to fluctuate according to the load, resulting in a modulation noise to affect the sound quality. The Advanced Speed Silent Power Supply has eliminated this noise by fixing the switching frequency in the 400kHz band. Furthermore, a Super Low Noise Regulator is provided in the later stage. This prevents the decrease of regulation resulting from the fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a high-response power supply that results in the best performance from the digital amplifier. Four Independent Power Supply Units In the SU-R1000, every element comprising the power supply has been diligently studied and revised for higher sound quality. What’s more, four independent power supply units are provided for different circuit blocks for further enhancement of sound quality. Since the SU-R1000 is an integrated amplifier, the internal circuits consist of a pre-amp stage and power amp stage in a mix of analogue and digital circuits. The Phono-EQ section which processes minute analogue signals is particularly susceptible to the effect of noise transmitted through the power supply line. The SU-R1000 uses separate power supply units for the analogue circuits and digital circuits in the pre-amp stage. It also uses separate power supply units for the right and left channels in the power amp stage that requires large electrical power. With the four independent power supply units, the SU-R1000 prevents power-line-induced interference among the circuit blocks and realises a high S/N ratio and superb separation. High-grade Digital/Analog I/O Circuit The phono input section and analogue input section feature a full-discrete circuit design. Technics has realised an ideal, symmetrical circuit layout and performed meticulous tuning. The new circuits prevent interference between the right and left channels and achieve excellent channel separation. Furthermore, the phono input section and XLR input section employ completely balanced transmission to ensure high-purity signal transmission with minimum effect of noise. The USB input circuit in the digital input section is equipped with a capacitor of high-quality ruby mica and a power conditioner with nonmagnetic carbon film resistors for blocking electrical noise e.g. from a PC and for minimising the effect of external noise. The A/D converter incorporates a high-performance chip made by Asahi Kasei Microdevices (AKM) for high-precision A/D conversion. Thus, the SU-R1000 reproduces outstanding sound quality from any analogue or digital input sources. High Rigidity Chassis and Design The rigidity of the chassis has been enhanced extensively to suppress the enclosure vibration that is also a source of noise. The inner chassis features a double-deck separated structure. Mounted on the upper deck is the power amp section consisting of the amplification circuit and its power supply circuit. Installed on the lower deck is the pre-amp section which is comprised of the analogue input section, including the phono equaliser, and the digital input section as well as the power supply circuits for those circuits. Not only the upper and lower decks but also individual circuit blocks are separated from one another by steel shield plates. These steel shield plates also serve as reinforcing plates for strengthening the rigidity of the entire chassis. On the outside, the front panel is 10-mm thick, while the side panels and top panel are made of 6-mm-thick alumite-treated aluminum plates.They have also improved the rigidity and vibration resistance. The insulators that support the chassis are made of cast iron with excellent signal attenuation characteristics. All in all, the above parts and materials enhance the quality of internal signals and eliminate the effects of external vibrations at highest levels. Input and output terminals made of meticulously selected high-quality parts - Speaker terminals designed to allow connection of extra-large diameter speaker cables - Y-lug terminals for ensuring reliable cable connection - Neutrik-manufactured analogue balance input terminals and PHONO XLR input terminals (exclusively for MC) - Analogue input terminals with gold-plated, machined brass parts Technics’ refined design - Attractive front panel embellished with high-quality hairline surface finish and equipped with an iconic, large dual-needle meter - Volume dial and selector knob made of parts machined from solid aluminum blocks and spin-finished Intelligent Phono EQ The Intelligent Phono EQ mounted in the SU-R1000 utilises the sound quality improvement technology for DSP, which Technics has accumulated through the development of LAPC, in order to realise high sound quality not possible with analogue Phono-EQ. This technology consists of three parts: 1. Accurate EQ Curve, 2. Crosstalk Canceller and 3. Response Optimiser. These functions can be turned ON/OFF to suit the user’s preference. Accurate EQ Curve – Made possible by hybrid analogue/digital circuit design An accurate EQ curve is achieved by a hybrid analogue-digital system. The high-gain low-pass filter (LPF) performs analogue processing, while high frequencies are raised after the A/D conversion. The use of the 40-dB LPF(Low-pass filter) in the analogue region suppresses the bit loss during digital filter processing, and high frequencies are raised with high accuracy in the digital region to achieve a high S/N ratio. Crosstalk Canceller - For measurement and improvement of crosstalk characteristic unique to each cartridge This function measures the crosstalk characteristic of the installed cartridge by using the crosstalk measuring signal recorded on the Calibration Record bundled with the SU-R1000. It then performs reverse-correction using the built-in DSP to achieve significant improvement of the crosstalk characteristic. This results in a more precise sound image and a wider sound ambience. Phono Response Optimiser - For correction of disturbance in cartridge frequency characteristics This function measures the frequency characteristics of the installed pickup cartridge by using a TSP (Time Stretched Pulse) signal recorded on the bundled Calibration Record, and corrects characteristics disturbance. It corrects the effect of impedance matching between the pickup cartridge and the phono equaliser to reveal the true sound quality of the cartridge. This technology aims to improve sound quality by avoiding a selector such as a switch in the high-sensitivity phono input line for the removal of the possibility of noise disturbance. *Although the record may be warped depending on the production method or its characteristics, this record passed the test for proper signal reading and is shipped. *The record may be warped depending on the storage environment in your house. Please note a badly warped record may not only disturb the measurement but also hurt the cartridge.

JENO Engine Jitter is a major cause of distortion in digital systems, and is caused by mis-timing in the master clocks used in digital-to-analogue conversion. To eliminate the degradation of sound caused by jitter, Technics has developed an original jitter reduction circuit, comprising a clock generator in the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter for suppressing jitter in the high-frequency range. Thus it reduces jitter in an ideal way over the entire frequency range. This works with original high-precision PWM (Pulse Width Modulation) conversion circuit, optimising the noise-shaping speed, the degree and re-quantisation number, and the PWM gradation, in order to convert high-resolution signals to PWM without causing any damage to the dynamic range. These technologies enable Technics digital amplifier designs to reproduce the natural and delicate nuances of music. ADCT (Active Distortion Cancelling Technology) The Active Distortion Cancelling Technology newly developed by Technics accurately extracts and removes distortion in the power output stage which is generated by the speaker’s counter electromotive force and voltage drops. In the Hi-Fi audio market where an unlimited number of audio systems can be configured by combining various products, high-end audio amplifiers need to optimally drive a diversity of speakers. The Active Distortion Cancelling Technology accurately extracts distortion by determining the difference between the speaker terminal output and JENO output and then applies correction to the output digital signal, thus correcting the conventional digital amp system. This provides powerful speaker driving force and acoustic energy while offering the superior benefits of a digital amplifier, such as low noise, precise sound image and expansive sound ambience, regardless of the types of connected speakers. Advanced Speed Silent Power Supply The SU-R1000 uses a switching power supply system to ensure a stable supply of voltage and current required by the digital amp. In a conventional switching power supply system, the ON time of the switching operation was controlled in order to stabilise the voltage, and this causes the switching frequency to fluctuate according to the load, resulting in a modulation noise to affect the sound quality. The Advanced Speed Silent Power Supply has eliminated this noise by fixing the switching frequency in the 400kHz band. Furthermore, a Super Low Noise Regulator is provided in the later stage. This prevents the decrease of regulation resulting from the fixed switching frequency and impedes the mixing of noise component into high frequencies. The result is a high-response power supply that results in the best performance from the digital amplifier. Four Independent Power Supply Units In the SU-R1000, every element comprising the power supply has been diligently studied and revised for higher sound quality. What’s more, four independent power supply units are provided for different circuit blocks for further enhancement of sound quality. Since the SU-R1000 is an integrated amplifier, the internal circuits consist of a pre-amp stage and power amp stage in a mix of analogue and digital circuits. The Phono-EQ section which processes minute analogue signals is particularly susceptible to the effect of noise transmitted through the power supply line. The SU-R1000 uses separate power supply units for the analogue circuits and digital circuits in the pre-amp stage. It also uses separate power supply units for the right and left channels in the power amp stage that requires large electrical power. With the four independent power supply units, the SU-R1000 prevents power-line-induced interference among the circuit blocks and realises a high S/N ratio and superb separation. High-grade Digital/Analog I/O Circuit The phono input section and analogue input section feature a full-discrete circuit design. Technics has realised an ideal, symmetrical circuit layout and performed meticulous tuning. The new circuits prevent interference between the right and left channels and achieve excellent channel separation. Furthermore, the phono input section and XLR input section employ completely balanced transmission to ensure high-purity signal transmission with minimum effect of noise. The USB input circuit in the digital input section is equipped with a capacitor of high-quality ruby mica and a power conditioner with nonmagnetic carbon film resistors for blocking electrical noise e.g. from a PC and for minimising the effect of external noise. The A/D converter incorporates a high-performance chip made by Asahi Kasei Microdevices (AKM) for high-precision A/D conversion. Thus, the SU-R1000 reproduces outstanding sound quality from any analogue or digital input sources. High Rigidity Chassis and Design The rigidity of the chassis has been enhanced extensively to suppress the enclosure vibration that is also a source of noise. The inner chassis features a double-deck separated structure. Mounted on the upper deck is the power amp section consisting of the amplification circuit and its power supply circuit. Installed on the lower deck is the pre-amp section which is comprised of the analogue input section, including the phono equaliser, and the digital input section as well as the power supply circuits for those circuits. Not only the upper and lower decks but also individual circuit blocks are separated from one another by steel shield plates. These steel shield plates also serve as reinforcing plates for strengthening the rigidity of the entire chassis. On the outside, the front panel is 10-mm thick, while the side panels and top panel are made of 6-mm-thick alumite-treated aluminum plates.They have also improved the rigidity and vibration resistance. The insulators that support the chassis are made of cast iron with excellent signal attenuation characteristics. All in all, the above parts and materials enhance the quality of internal signals and eliminate the effects of external vibrations at highest levels. Input and output terminals made of meticulously selected high-quality parts - Speaker terminals designed to allow connection of extra-large diameter speaker cables - Y-lug terminals for ensuring reliable cable connection - Neutrik-manufactured analogue balance input terminals and PHONO XLR input terminals (exclusively for MC) - Analogue input terminals with gold-plated, machined brass parts Technics’ refined design - Attractive front panel embellished with high-quality hairline surface finish and equipped with an iconic, large dual-needle meter - Volume dial and selector knob made of parts machined from solid aluminum blocks and spin-finished Intelligent Phono EQ The Intelligent Phono EQ mounted in the SU-R1000 utilises the sound quality improvement technology for DSP, which Technics has accumulated through the development of LAPC, in order to realise high sound quality not possible with analogue Phono-EQ. This technology consists of three parts: 1. Accurate EQ Curve, 2. Crosstalk Canceller and 3. Response Optimiser. These functions can be turned ON/OFF to suit the user’s preference. Accurate EQ Curve – Made possible by hybrid analogue/digital circuit design An accurate EQ curve is achieved by a hybrid analogue-digital system. The high-gain low-pass filter (LPF) performs analogue processing, while high frequencies are raised after the A/D conversion. The use of the 40-dB LPF(Low-pass filter) in the analogue region suppresses the bit loss during digital filter processing, and high frequencies are raised with high accuracy in the digital region to achieve a high S/N ratio. Crosstalk Canceller - For measurement and improvement of crosstalk characteristic unique to each cartridge This function measures the crosstalk characteristic of the installed cartridge by using the crosstalk measuring signal recorded on the Calibration Record bundled with the SU-R1000. It then performs reverse-correction using the built-in DSP to achieve significant improvement of the crosstalk characteristic. This results in a more precise sound image and a wider sound ambience. Phono Response Optimiser - For correction of disturbance in cartridge frequency characteristics This function measures the frequency characteristics of the installed pickup cartridge by using a TSP (Time Stretched Pulse) signal recorded on the bundled Calibration Record, and corrects characteristics disturbance. It corrects the effect of impedance matching between the pickup cartridge and the phono equaliser to reveal the true sound quality of the cartridge. This technology aims to improve sound quality by avoiding a selector such as a switch in the high-sensitivity phono input line for the removal of the possibility of noise disturbance. *Although the record may be warped depending on the production method or its characteristics, this record passed the test for proper signal reading and is shipped. *The record may be warped depending on the storage environment in your house. Please note a badly warped record may not only disturb the measurement but also hurt the cartridge.

4 JENO Engine Four JENO Engines produce optimal performance, with superior sound imaging through subwoofer,　midrange, and tweeter alignment. This achieves excellent tuning and optimises sound spaces to fit　individual listening environments using Space Tune. LAPC LAPC is an original Technics speaker load adaptive technology. It measures the amp's frequency amplitude phase characteristics with speakers connected to the unit, and performs digital signal processing to achieve the ideal impulse response. Characteristic parameters optimised for the low-frequency and high-frequency speaker load characteristics of speakers are already pre-set in the LAPC computation circuit of the unit to realise ideal frequency and phase characteristics over the entire frequency range. Space Tune™ To provide the OTTAVA™ S SC-C50's excellent sound in every room and listening position, Space Tune optimises the listening environment to the sound space. In addition to offering 3 preset modes to suit the mounting location, a microphone built into the main unit enables an Auto function to optimise the sound and an iOS device can also be used to measure and compensate the frequency response with greater precision. This allows the user to enjoy higher sound quality regardless of where the unit is placed. Complete Compatibility In addition to USB playback and analogue/optical input, the OTTAVA™ S SC-C50 supports Bluetooth®, AirPlay 2, Chromecast built-in, Spotify, Tidal, Deezer, Internet Radio and Network Playback, allowing comfortable playback of a diverse range of music sources from a single unit. High connectivity also supports multi-room, stereo pairs, and Wi-Fi, as well as iOS and Android control apps. Elegant and Timeless Design The OTTAVA™ S SC-C50 combines practical function with elegant design. The thick aluminum top panel increases the rigidity of the chassis, and the iconic OLED is surrounded by ring keys for easy operation. Rear louvers add further elegance while enhancing the function of an internal heat-reducing mechanism. And the beautiful arc form, which helps to eliminate unwanted vibration and standing wave in the chassis, incorporates acoustic technology to achieve a wide sound stage. This lets you freely place the OTTAVA™ S SC-C50 to suit the listening position. A Compact Body with a Wide Sound Stage The arc-shaped body houses 3 midranges, 3 tweeters and 1 subwoofer, while left- and right-angled speakers and a centre speaker create rich stereo imaging and crisp vocals. A “directivity-control horn” eliminates mutual speaker interference to achieve wide directivity, and a coaxial midrange and tweeter ensure vertical directivity with less frequency disorder from the compact body. Truly Powerful Architecture Three 1.6-cm tweeters deliver high-res sound up to 50 kHz. This combines with a front-firing 12-cm long-stroke subwoofer and a straight, large-diameter, long port. A total of 7 units in the rigid, glass fiber reinforced body produce powerful sound from the 3.1-channel amplifier. Twin Power Supply Circuit System Regular power supplies use one transformer to supply power to the amp, and digital circuits, and so if there is any load fluctuation or if noise occurs on a circuit, other circuits are affected, which results in degradation of the sound quality. This power supply system includes independently installed switch mode power supply circuitry for the amp and the other circuits, which eliminates mutual interference, thereby reducing degradation of sound quality caused by noise or power supply fluctuations. In addition, a layout with dedicated transformer and amp circuits enables the shortest possible connection to further reduce noise. Broad selection of streaming services, easy-to-use controls Chromecast built-in The Chromecast built-in function supports a wide variety of music streaming services for easy casting from a smartphone app. And since the data is streamed directly to the main unit, there is no degradation in sound quality, and the user can select from a diverse range of music. Works with the Google Assistant If a Google Assistant built-in device is included　in the same network, Google Assistant can be used to operate OTTAVA™ S SC-C50 music playback and other functions. When the user doesn't have a smartphone app in hand, or when hands are full, music can be easily played by voice command. Multi-room and Stereo Pairing* With a number of Chromecast built-in speakers, the variety of music streaming services can be played in several rooms, or different music can be played from room to room. In addition, if you use Technics Audio Center app and have another app compatible Technics devices, you can also enjoy other music source in multi-room such as Bluetooth, AUX, Optical input, USB, Internet radio and also OTTAVA™ S SC-C50 compatible streaming music. If two OTTAVA™ S SC-C50s are arranged and set to stereo, you can enjoy highly ambient stereo sound*. *The Google Home App is required.

Premium Class Amplifier Employs innovative fully-digitised processing that delivers a pure and accurate signal to the speakers. Stereo Integrated Amplifier SU-C700 JENO Engine (Jitter Elimination and Noise-shaping Optimization) Just like the R1, the SU-C700 is a fully-digital amplifier and delivers high-resolution digital signals without any distortion being introduced between the input stage and output to the speakers. Technics has developed an original jitter-reduction circuit, avoiding the sound quality degradation due to jitter common to conventional digital amps. It uses a clock generator for the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter to suppress jitter in the high-frequency range. LAPC (Load Adaptive Phase Calibration) Technics has developed a speaker impedance optimisation algorithm, using digital signal processing to flatten both the amplitude and phase-frequency response to make the most of your speakers. The result is a sound with better focus, spaciousness and definition. High-speed Silent Linear Power Supply Using a large-current Schottky-barrier diode, a rectifier circuit with electrolytic capacitors, and a stabilised power supply circuit, the SU-C700 ensures ample power supply at all times, even when dynamic music demands high current. Battery Driven Clock Generator Technics used battery power for low-noise applications in analogue amplifiers in the past: here, this same technology is used to improve digital clock precision, enhancing the definition of the sound. High Rigidity Metal Double Chassis To reduce vibration and noise that degrade the purity of sound, the Premium Series features a High Rigidity Metal Double Chassis, using inner and outer steel plates. Various Inputs The SU-C700 supports a wide range of inputs, such as SPDIF, Analogue and Phono, as well as USB-DAC for connection of a PC. The digital input terminal supports coaxial 192-kHz/24-bit PCM and optical 96-kHz/24-bit. The USB DAC input terminal supports 192-kHz 32-bit PCM and 2.8-MHz/5.6-MHz DSD native playback (analogue output) and asynchronous transmission. The SU-C700 converts analogue signals to high-precision 192-kHz/24-bit PCM signals using the A/D converter. The full-digital system achieves high-purity reproduction from any content.