Φορητά Audio DAC

FiiO KA17: 2x ES9069Q DACs and XMOS XU316 USB interfaceThe FiiO KA17 portable DAC headphone amplifier features two ESS Technology ES9069Q DAC chips based on a 32bit Hyperstream IV architecture, enabling it to achieve a dynamic range of 130dB and a THD+N of -120dB for pure, detailed sound reproduction. Rarely used on devices of this minimum size, FiiO has nevertheless chosen to integrate an XMOS XU316 USB interface. This well-thought-out set of chips enables the KA17 to support high-resolution PCM 32bit, 768kHz, DSD512 and MQA streams.FiiO KA17: an amplifier stage based on THX AAA 78+ technologyAlready used in the M11 Pro and M11 Plus, THX AAA 78+ technology is also present in the KA17. Here, it is coupled with the use of 8 AOPs working in parallel in a 4-channel symmetrical configuration for high output power and detailed sound reproduction quality. Indeed, its output power reaches up to 2x 650mW on its balanced 4.4mm jack output and up to 2x 270mW on its 3.5mm jack output.Desktop mode brings robust powerThe KA17 is equipped with an innovative Desktop Mode and features an external dedicated Type-C power port. When there is sufficient USB power, or the independent power port is connected to a power adapter, the Desktop Mode will be enabled, and it will automatically adjust the DAC, amp power, and headphone amplifier to a high-performance state, fully unleashing the potential and output power of the device.As a flagship model, the KA17 is FIIO‘s first USB dongle to incorporate the THX headphone amp circuit. It adopts a brand-new THX AAA 78+ headphone amplifier architecture with a configuration of 4 channels fully balanced + 8 channels parallel-connected op-amps. This architecture significantly increases the output power. In Desktop Mode, the KA17’s balanced output power can reach up to 650mW + 650mW, approaching that of a desktop amplifier, with stronger dynamics and better control, and more complete sound reproduction.Top configurations, worth being a flagshipThe KA17 adopts two newly released ESS dual-channel flagship DACs, ES9069Q, based on the fourth-generation 32-bit HyperStream architecture. It achieves higher performance and lower power consumption while further reducing digital noise inside the DAC, achieving a remarkable 130dB dynamic range and -120dB THD+N. The performance is outstanding, and the sound background is purer.The KA17 also features the professional-grade XMOS 16-core chip, XU316, rarely used in USB dongles. It offers lower latency, more stable transmission, better compatibility, and supports up to 768kHz/32bit, native DSD512 decoding, and MQA full decoding. Paired with dual audio crystal oscillators, it can accurately adapt to various sources and sampling rates.Comprehensive experience, flagship styleThe KA17 employs a 0.91-inch dot matrix display that can indicate different functions intuitively. Also, coupling with the physical buttons easily allows you to customize various settings such as screen orientation, filters and display sleep timer.In addition, the KA17 is one of the few USB dongles that supports PEQ adjustment. It supports ten customizable frequency bands, allowing users to fine-tune EQ bands, gain level, and bandwidth through FIIO’s independently developed adjustment algorithm and interface, greatly enhancing playability.The compact body houses a multistage HiFi audio architecture comparable to that of a player, with separate digital and analog boards to prevent crosstalk, a 3-stage 10-rail power supply design, and comes standard with a body-matching leatherette case. It also features built-in temperature detection and output DC detection, with 60 and 120 levels of volume adjustment, supporting SPDIF output…

Forged for Masters of Audio.GO bar Kensei is akin to a legendary sword meticulously forged for a Kensei. Embodying the dedication of a master swordsmith, we focused on purity, balance, and refinement to reveal the true essence of your music.Featuring cutting-edge Japanese audio processing technology: K2HD, and improved power supply and clock circuitry, the Kensei represents the pinnacle of our journey of refinement in the GO bar range.Whether you’re commuting, working remotely, or traveling for pleasure, the GO bar Kensei offers a perfectly portable solution to elevate your headphone experience to heavenly heights.Kensei is a Japanese term that translates to “Sword Saint” in English, a title granted to the elite few who elevate the craft and artistry of swordsmanship beyond even that of the finest swordmasters.Revitalise studio recording sound with legendary K2HD.Despite their pristine clarity, digital recordings sometimes seem emotionally flat and lifeless.Engineers at Victor Studio noticed a lack of emotion between their original masters and digital sub-masters, sparking a quest for a solution. They meticulously compared countless finished recordings with the copy recordings by ear, relying on their instinctive feel and human expertise. Their solution: K2 Technology.The K2 Technology process revives rich, natural harmonics into digital sound, adding an organic quality unlike any other. K2 Technology processing revitalises the studio recording sound, infusing it with life once again.“The K2 parameter values provided by iFi this time are completely new K2 parameter values that have never been used before and were selected by JVCKENWOOD and passed a listening test by studio engineers at Victor Studios. While previous K2 parameter values were set with consideration of correcting the sound quality of the product itself, the K2 parameter values provided this time for iFi are purely the settings for the best K2 effect. In this sense, it can be said that the K2 parameter values allow you to hear the original ideal “K2 sound.” commented, JVCKENWOOD.Tailored. Sweet Sound.Listen the way you like with four bespoke digital filters and two analogue processing modes, each tailored to enhance your enjoyment across different music genres.Bit-Perfect: Delivers natural tones, ideal for all genres.GTO: Enhances sound details and density, particularly suited for Vocal tracks.Minimum Phase: Produces a warmer sound, blending characteristics of Bit-Perfect and Standard, perfect for Soul and Jazz.Standard: Offers a tighter sound with controlled highs, perfect for Pop music and Movie OST.Experience chest-thumping bass with XBass+ and immerse yourself in a spacious sound field with XSpace.Advanced chip. Accurate clock.The DAC section of the GO bar Kensei uses a powerful 16-core XMOS micro controller to process the audio data received at the USB input. Our in-house team has programmed the XMOS firmware to optimise sound quality and ensure a perfect partnership with the 32-bit Cirrus Logic DAC chipset.A customised digital filter minimises pre-echoes and ringing artefacts. Our GMT (Global Master Timing) precision clock system ensures ultra-low jitter.Supports higher-than-streaming audio formats:PCM up to 32-bit/384kHz ​Native DSD playback up to DSD256​2x DXD​Full MQA decodingCompact and Powerful.The GO Bar Kensei is crafted with Japanese stainless steel for maximum rigidity.With its compact dimensions of 65 x 22 x 13.2 mm, it matches the size of a USB flash drive. This makes it the perfect travel companion for your mobile, tablet or MacBook Pro, blending into your life for headphone use.Its USB-C connectivity ensures plug-and-play convenience, allowing for hassle-free use.The GO Bar Kensei offers a maximum output power of up to 477mW, which is about 10 times more powerful than an iPhone 15*.It incorporates two power tuning technologies: iEMatch for high-sensitivity IEMs, and Turbo mode for power-hungry headphones. This allows it to easily drive a wide range of premium earphones and headphones.*Compared to iPhone’s USB-C to 3.5mm Adapter.Cut the Crosstalk.Connect to the GO bar Kensei via 3.5mm S-Balanced or 4.4mm Balanced headphone outputs.iFi’s exclusive 3.5mm S-Balanced* technology cuts crosstalk and noise by 50% with regular single-ended headphones.

The Diablo 2 is the world’s first portable DAC/Amp with Bluetooth 5.4, it supports aptX Lossless, the only Bluetooth codec for lossless CD-quality streaming without sacrificing audio quality.The predecessor of Diablo 2 pioneered support for xMEMS solid-state micro-speaker technology, enhancing IEM and headphone performance with several unique benefits:A 15µsec mechanical response, 150 times faster than typical drivers.A 2° flat phase response for precise sound and precise +/- 1° phase matching for enhanced spatial sound accuracy.A speaker diaphragm made of silicon, 95 times stiffer than plastic, reducing speaker break-up and delivering clearer mid-high frequencies.Due to the high voltage requirements of xMEMS, iFi has partnered with them to integrate this technology into the new Diablo 2. It utilises the piezoelectric effect to create paper-thin solid-state speakers by converting electrical energy into mechanical energy, exciting an integrated silicon membrane to generate powerful acoustic sound waves for enhanced audio output.Click here to read more about the xMEMS earphones application.“It’s got a NOS fogger system and a T4 Turbo, Dominic.”Struggling with your power-hungry headphones? Press the NOS button, and our Diablo goes into beast mode. The Diablo 2 offers three power modes: Normal for IEMs, Turbo for mid-sensitivity headphones, and Nitro for demanding headphones, boasting a 19.2V maximum output.A switch underneath activates iFi’s iEMatch technology. This feature is tailored for high-sensitivity headphones and earphones, greatly benefiting your in-ear monitors (IEMs). It removes background noise and increases the usable volume range.The Diablo 2 accommodates a wide range of headphones, from IEMs to power-hungry over-ears. It features a 6.3mm single-ended headphone socket and a 4.4mm balanced output. Additionally, a 3.5mm to 6.35mm adapter is included for versatile connectivity.Ruling all Bluetooth codec and music formats.The Diablo 2 features the latest Bluetooth 5.4 technology, supporting the new aptX Lossless codec, which provides a maximum bitrate of 1,200kbps. In comparison, aptX Adaptive has a maximum bitrate of 420kbps, while LDACTM offers a higher bitrate of 990kbps.The Diablo 2 used Qualcomm’s new QCC518x Bluetooth audio chip, is qualified to Bluetooth 5.4, supported all* Bluetooth formats including: aptX Lossless, aptX Adaptive, aptX, LDACTM, LHDC/HWA, AAC and SBC.*As of 10 Nov 2023. Check your device for Bluetooth codec support.**LDAC and LDAC logo are trademarks of Sony Corporation.Dual Core Burr Brown chipset provides Bit-Perfect DSD and PCM support at sample rates up to 768kHz, DSD512, and Full MQA decoding. Even as Spotify is moving towards Lossless, don’t get left behind.Wings of Inferno.The Diablo 2 comes with four wings that you can customise to position it horizontally, like a desktop DAC/amp, or vertically to save space.Additionally, it features twenty-two rails for improved cooling performance, with eight of these rails being compatible with the Diablo wings, enabling desktop stand use.Devil in the details.When examining the Diablo 2’s front panel, you’ll find a new Volume Lock switch next to the volume control, preventing accidental adjustments during transport.At the back panel’s left side, there’s a switch for mode selection and Bluetooth pairing. On the right side, two USB-C ports streamline cable management—one for audio and the other for charging.Sound So Moving. Even the Devil May Cry.Diablo 2 features PureWave, Servoless DirectDrive, OptimaLoop, and Advanced Jitter Reduction Technology, delivering exceptionally pure, detailed, and emotionally touching sound, these technologies elevate performance to unparalleled heights, even challenging desktop DAC/amps.PureWave’s full balanced dual-mono circuitry elevates clarity by separating channels and reducing noise. DirectDrive removes the need for coupling capacitors, ensuring purer audio.OptimaLoop employs tailored multiple feedback paths in amplifiers, refining gain control and reducing distortion. The enhanced GMT femto-precision clock with Smart storage cache minimises phase noise for cleaner sound.Diablo 2 is the most formidable DAC/Amp on the planet. Your headphones should be scared.Diablo’s Energy SourcesThe Diablo 2 can be powered by battery or mains.Battery power provides ultra-clean and stable DC current, avoiding mains electricity issues like dips, spikes, and noise inducing RFI/EMI pollution. However, there are sonic downsides due to low output voltage and inconsistent output impedance as batteries discharge.The bundled iPower2 power supply features Active Noise Cancellation II, effectively cancelling out all incoming EMI and RFI noise and making it more than 10 times quieter than most audiophile power supplies.To make less efficient headphones, like planar magnetics, sing, the voltage needs to be stepped up from 3.7V to +/- 15V. We use a step-up converter operating at 1.2MHz – a frequency far beyond audibility and easier to filter than a typical switch-mode supply, ensuring high linearity and ultra-low noise.

It’s head-fi. It’s desk-fi. And it’s hi-fi.The NEO iDSD 2 is our versatile new 3-in-1 DAC/Amp, designed specifically for CAS audiophiles. It pairs effortlessly with your headphones as a Head-Fi DAC/Amp, can be used as a pure DAC with your integrated amplifier, or serve as a DAC/Preamp for your active speakers and power amplifier.It features the latest Bluetooth 5.4, supporting the new aptX Lossless, the only Bluetooth codec capable of streaming lossless CD-quality audio without sacrificing audio quality.The NEO iDSD 2 has improved headphone and line outputs, providing ample power for your high-demanding headphones, as well as power amplifiers.My Blue isn’t your blue. It’s new and Lossless.The NEO iDSD 2 features the latest Bluetooth 5.4 technology, supporting the new aptX Lossless codec, which provides a maximum bitrate of 1,200kbps. In comparison, aptX Adaptive has a maximum bitrate of 420kbps, while LDACTM offers a higher bitrate of 990kbps.However, aptX Lossless is the first and only Bluetooth codec capable of streaming CD-quality audio without using a compression method that degrades sound quality. While other Bluetooth codecs claim to support CD-quality and even hi-res audio, they employ lossy compression during transmission, which negatively affects sound quality.The NEO iDSD 2 used Qualcomm’s new QCC518x Bluetooth audio chip, is qualified to Bluetooth 5.4, supported all* Bluetooth formats including: aptX Lossless, aptX Adaptive, aptX, LDACTM, LHDC/HWA, AAC and SBC.*As of 22 Sep 2023. Check your device for Bluetooth codec support.**LDAC and LDAC logo are trademarks of Sony Corporation.5x more headphone output power than its predecessor.You heard me correctly – the headphone output power of the NEO iDSD 2 is a whopping 5 times more powerful than that of the 1st-gen NEO iDSD. With a maximum headphone output power of 5,551 mW (@ 32Ω), it outperforms even some dedicated headphone amplifiers, making them sweat. The headphone section has seen significant improvement, as we’ve essentially integrated a Diablo headphone circuit into it.It features Auto iEMatch to reduce annoying hiss from high-sensitivity headphones without losing any dynamic range and four gain settings ranging from -12dB to +16dB, making it suitable for all your IEMs and headphone types, from super-sensitive to power-hungry.The NEO iDSD 2 is not only a powerhouse, but it’s also tailored for your ears. The newly added analogue processing modes, XSpace and XBass II, along with the four digital filters, allow you to finetune the sound. Both XSpace and XBass II are pure analogue signal processing modes designed to adjust the soundstage and low-frequency response to match your headphones.Stand by you. No matter up or down.Whether you’re using the NEO iDSD 2 as a Desk-Fi or Hi-Fi, you can position it horizontally or vertically. The new 2-inch colour display automatically rotates to suit the orientation.When using it as a Desk-Fi, you can position it vertically on your desk to save space. Set it to variable output, and with its powerful 19.5V maximum balanced output, it works well with your active speakers with volume control. The volume control is analogue, which is superior to any digital volume control.When using the NEO iDSD 2 as a Hi-Fi, you can place it horizontally. It can serve as a pure DAC, playing all Hi-Res music files from PCM 32-bit/768kHz to DSD512 and full MQA decoding. You can also connect it directly to your power amplifier as a preamplifier, utilising its analogue volume control.GMT Femto-Precision Clock. Upgradable.The internal GMT femto-precision clock, combined with a smart storage cache, forms an advanced jitter reduction system. It effectively reduces jitter in the digital signal, producing cleaner and more accurate sound.If you possess a more accurate external clock, or if you wish to synchronize with other devices such as CD players or network streamers that have an external clock input, you can connect both the NEO iDSD 2 and the other devices to the external clock via the 10MHz External Sync Clock input for even greater clock signal accuracy.It’s rare to find an External Sync Clock input in this price range. Even if you don’t have an external clock, the internal GMT femto-precision clock still offers excellent performance in its class.More than new features. Enhanced circuitry.The NEO iDSD 2’s enhanced PureWave circuit design, with its balanced dual-mono topology and short signal paths, is known for outstanding linearity and minimal noise and distortion, offering you exceptional sonic purity.The results are an improved Signal-to-Noise Ratio (SNR) of >120dB(A), Dynamic Range (DNR) of -120dB(A), and Total Harmonic Distortion plus Noise (THD+N) of

Hi-Fi Sound Anywhere, AK HC3Astell&Kern offers a Hi-Fi USB DAC cable product range for a true Hi-Fi experience on the go. Designed to minimize noise with the ultra-high sound quality of integrated Hi-Fi grade DACs, it addresses the music lovers' desire for a true Hi-Fi experience when mobile. Not content with settling for the status quo, Astell&Kern has endeavored to enable our users to enjoy more features in Hi-Fi quality. Hi-Fi Dual DAC Cable – AK HC3 AK HC3 is the result of these efforts, and is designed to provide all the benefits of its predecessor, AK HC1 (PEE51), while enabling high-quality sound across various settings. AK HC3 features MQA 8X rendering to allow you to play high-quality sound anytime, and the microphone input enables even more entertainment and voice features. The dual-shielded cable and the proprietary Android app will help users experience Hi-Fi effortlessly and with no compromises.ES9219MQ Dual DAC from ESS for true Hi-Fi qualityMQA 8XDual-shielded cableSupports headset microphonesSupports iOS devicesProprietary app for Android (For Detailed Volume Control)Compact but powerfulLED display shows song detailsFull metal housing designSound in ultra-high resolution from Dual DACs, selected for Hi-FiAK HC3 adopts dual ES9219MQ, the SABRE HiFi® DACs from ESS that is highly regarded by audio fans for its ability to playback Hi-Fi sounds such as MQA in ultra-high quality, excellent noise control, and low power consumption. In addition, it supports Native DSD256 and 32 bit/384 kHz, supporting any high-resolution sound to realize Astell&Kern’s unique sound experiences.The Result of AK’s Ultra-Fine Audio Design TechnologyWith its compact size and uncompromising performance, the AK HC3 makes it easy to enjoy real Hi-Fi sound anytime, anywhere. Astell&Kern is adored by countless music lovers thanks to our dedication and meticulous delivery of the original sound with our signature DAPs, or portable high resolution audio players. We included the Astell&Kern technology and know-how that has been accumulated from our DAPs over the years in this small device. We used micro resistors and capacitor parts to achieve the small dimensions without compromising performance. Tailored ultra-small tantalum capacitors, which are used in AK player products to create a stable system and audio performance by controlling the power fluctuations, are also included to create the optimal audio circuit. In addition, the output and audio performance are enhanced with Astell&Kern's unique technology while minimizing current consumption in consideration of the connected device.Noise-Free Rear Output StructureAK HC3 incorporates a rear audio output design to minimize noise. Most USB DAC products have the DAC positioned in the USB terminal that is connected directly to the device to process and output audio. However, with the AK HC3, digital signals from the device go through the dual shielded cable to the audio circuit before being converted to an analog signal by the DAC. By processing the digital signal after, the result is superior, noise-free sound compared to other USB DAC products.Dual Noise Shielded CableThe AK HC3 features a dual shielded cable to minimize noise and deliver more vivid, original sound. The copper core wire is coated with tin to prevent corrosion and strengthen tensile force for enhanced durability. In addition, the entire cable is wrapped in an aluminum film to block noise, the biggest issue in audio, then the tin-coated copper wire is woven to minimize noise interference to sound. MQA 8X Playback in Ultra-high ResolutionAK HC3 is built with a renderer that supports MQA 8X playback in ultra-high quality to deliver sound that's much closer to the original sound.MQA is a high-quality sound source format that requires an external DAC or appropriate playback devices. AK HC3 is the right choice if you want to enjoy MQA anytime. Pair your mobile device with AK HC3 to play any MQA sources up to MQA 8X. With AK HC3 and any device that supports MQA unfolding, anyone can unleash the ultra-high quality of MQA through the proprietary app with network play and streaming features.In order to use AK HC3 as a hardware MQA renderer, a software core decoder that supports MQA unfolding is required.Easy and Convenient — Plug & PlayConnect directly to a Windows PC, Mac, smartphone or tablet with a USB-C port that supports plug & play, without needing a separate conversion adapter, and enjoy high-quality sound. The AK HC3 utilizes power from the connected playback device so it does not need to be charged or be connected to a separate external sound card, AMP or DAC. Just connect AK HC3 to experience high-fidelity sound from a computer or mobile device. The AK HC3 is also compatible with iOS devices using the included USB-C to Lightning adapter.Entertaining experiences with AK HC3 and microphone and controller supportAK HC3 has been improved to be compatible with any 3- or 4-pole 3.5-mm plug earphones and headsets, as well as in-line controller and microphone features of 4-pole earphones and headsets. With AK HC3, you can enjoy a greater range of entertainment experiences with your mobile device. The direct USB connection provides lower latency compared to other wireless solutions, enabling a sound performance that’s perfect for gaming. The voice chat features enhance your gaming experiences, so you can play with others, and the microphone input makes it even more useful for professional web conferencing. Plus, the rich sound capability adds to the utility of AK HC3 by making your video experiences more realistic and immersive. When pairing your AK HC3 with iPhones, recording is supported for microphone input, but not supported for calls.Volume Control Through A Dedicated Android APPAs is common with many USB DACs, compatibility issues can arise such as different connected devices being set automatically to maximum volume output or playback at too low volume. To resolve such issues and offer greater control over the volume and function of the AK HC3, we have developed a companion app for Android OS devices. LED for real-time indicationAK HC3 has an LED indicator that displays song details.Standby: White / PCM: Red / DSD: Blue / MQA: MagentaDesign AK HC3 is super light with a full aluminum housing, and weighs only 20 gr. The compact and lightweight body embodies Astell&Kern’s design philosophy, emphasizing our fundamental ethos toward the music. The design inherits the “light and shadow” concept, which is the identity of Astell&Kern: all of the four sharp sides centered around the traversing centerline are positioned proportionally and converge on a single point, making them uniquely reflective and iridescent. The high-quality finish hides everything except for design factors such as the contours and the logo, preventing any visual distractions for a more immersive music experience.

The missing linkThe GO link is the missing link in your listening experience.Firstly, it will enable corded headphones and earphones to connect to digital devices that don’t have a 3.5mm headphone output.Secondly, even if your device does have a headphone socket, the GO link delivers a big sonic upgrade. This is because its sophisticated DAC (Digital-to-Analogue Converter) and headphone amp circuitry are superior to the audio tech contained within smart devices and computers.Go forward with GO link.Flexible friendAt one end of the GO link is a USB-C connector, and at the other is the DAC and headphone amp circuitry, both housed in robust yet lightweight magnesium alloy enclosures.In between is a 6cm length of flexible cable – this aids practicality, allowing the DAC/amp section to be angled towards the listener and reducing stress on the USB port to which the GO link is connected.DAC’s the ticketAt the heart of the GO link lies a power-efficient, high-performance DAC chip from ESS Technology’s Sabre HiFi series – the ES9219MQ/Q – benefiting from 32-bit HyperStream III architecture.This combines with Quad DAC+ and Time Domain Jitter Eliminator technologies, plus our dedicated clock circuitry utilising a specialised crystal oscillator, to deliver ultra-low distortion, excellent clarity and impressive dynamic range.Rarely implemented high-end features such as adjustable analogue gain with DRE (Dynamic Range Enhancement) plus technologies to minimise THD (Total Harmonic Distortion) and crosstalk are possible due to the DAC chip’s advanced specification.It is also possible to choose between a choice of digital filters via downloadable software.Do the twistThe cable linking both sections together uses silver-plated copper conductors with individual polymer insulation in a ‘twisted pair’ configuration.This rotational twist helps to optimise inductance and capacitance and also aids noise rejection. The GO link’s sound isn’t affected by electromagnetic interference picked up from nearby electrical sources.No distortion means you’re ready to dance without disturbance.Move with the musicUnlike other headphone dongles, the GO link doesn’t rely on the software-based volume controls in connected digital devices. This can adversely affect audio resolution.Instead, adjusting the volume on the connected device controls the volume level in the GO link’s DAC, not in the phone, tablet or computer. This hardware-based volume control is another feature that helps to deliver the GO link’s superior sonic performance.Hi-res in glorious colourThe GO link’s hi-res audio credentials are highly impressive given its diminutive size and price tag.PCM to 32-bit/384kHzDSD to 11.2MHz (DSD256)MQAAn LED changes colour to indicate the incoming audio format – PCM, DSD or MQA – and the PCM/DSD sample rate.Headphone heavenThe GO link’s headphone amp feeds a gold-plated 3.5mm socket, incorporating our S-Balanced configuration to reduce noise and crosstalk.It delivers a power output of 70mW into 32 ohms, and a maximum voltage output of 2.05V into 600 ohms. This gives it plenty of oomph to drive the kind of headphones and earphones likely to be used with the GO link and easily outclasses the headphone outputs built into smart devices and computers.Hi-Res try Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.Discrete ESS Sabre Hyperstream DAC chipset with time domain jitter eliminator, discrete oscillator and 112dB dynamic range for discerning listeners.Extensive jitter-eradication technologies are applied to the digital stage, including our GMT (Global Master Timing) femto-precision clock and intelligent memory buffer. This represents a total ‘out-of-the-box’ systematic digital solution that solves jitter once and for all.In music production, dynamic range means the difference between the loudest and quietest sounds. It’s measured in decibels, or dB for short. In a single audio track, dynamic range means the dB difference between the loudest and quietest moment in the audio file.You can think of the dynamic range in a system as the space between the noise floor and the clipping point. When a sound goes below the noise floor you won’t be able to tell the difference between the signal and the system noise of the medium. When a sound goes above the clipping point, the tops of its waveform will get abruptly cut off, causing harshness and distortion.iFi’s proprietary technology extends the Dynamic Range by 6 dB or more, for an improved listening experience.iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.See our Tech Note to dig deeper.TDK C0G (Class 1 ceramic) capacitors offer high stability and low losses for resonant circuit applications.Getting ever closer to the theoretical ideal of pure, frequency-constant capacitance, these capacitors reduce capacitor-induced distortion to vanishingly low levels.They are pricey but are a perfect addition to our products.muRata control-type, low-ESR high-Q multi-layer capacitors. The ‘ESR control’ aspect of the Murata is something special. Their noise suppression abilities are impressive.

With UA5, we are pushing our UA line into a bit different category. While UA1 and UA2 worked nicely as simple USB Audio dongles, UA5 is quite a bit closer to your bigger portable DAC/AMPs.UA5 adds volume wheel for an independent volume control, small screen for an easy access to multiple settings directly on the device, full-size 4.4mm balanced connector instead of fragile 2.5mm, fully balanced audio circuit, SPDIF digital output for use with other DACs and special Hybrid battery Power mode, to reduce battery drain from your smartphone.UA5 provides a better sound quality for your smartphone and a better user experience when connected to your computer.Hybrid Batter Power modeWhen enabled, certain sections of UA5 will still be running on USB power, like USB Controller and FPGA. But the crucial parts of DAC and amplifier will instead use a cleaner power from the battery.In our testing, this set-up proved helpful in three scenarios:Consistent analog performance and noise floor, independent from the quality of USB power of the connected device.Reduced power drain from the connected device, which can be crucial when running it with smartphone.Reduced power demand allows for a compatibility with certain devices, that are normally unable to provide enough power for USB DAC/Amps.UA5 is of course capable of running in a standard USB Powered mode, in which the battery is completely disconnected and all sections of UA5 runs out of USB power. UA5 will automatically switch to this mode when the battery runs too low. 

UA3 joins our highly popular line of UA models and it marks an important point for Shanling, as it will be our first model using a brand-new DAC from the relaunched line of AKM DACs.For many years, AKM DACs were the core part of Shanling’s audio designs, as they played a crucial role in delivering our house sound to all our fans. But following the fire at AKM’s factory in 2020, we had to look for alternative solutions, being unsure about the AKM’s future. It affected most of our releases in 2021, but we managed to transition successfully, keeping the strict Hi-Fi standards we have been building up for past 34 years.In early 2022, AKM relaunched their line of DACs and we immediately started working on new designs, diving into the possibilities of this updated generation of DACs. UA3 is first of these designs, utilizing a freshly released AK4493SEQ DAC, for the first time bringing the sound of AKM into our UA line of portable DAC/AMPs.UA3 builds upon the popular UA2, but takes over some features from the UA5. Balanced output is now using a more robust 4.4mm connector, we added hardware buttons for volume or playback control and the power output was improved to match the UA5.

Είτε χρησιμοποιείτε ένα smartphone τελευταίας γενιάς που δεν διαθέτει αναλογική έξοδο ήχου ,είτε θέλετε απλώς να βελτιώσετε την πολύ μέση έξοδο ήχου ενός τυπικού τηλεφώνου, το Shanling UA2 είναι μια φορητή και προσιτή λύση για αναπαραγωγή αρχείων ήχου υψηλής ανάλυσης οπουδήποτε χωρίς να μεταφέρετε περισσότερα από όσα χρειάζεται. Αυτή η δεύτερη έκδοση της σειράς UA είναι εξοπλισμένη με αυξημένες δυνατότητες αποκωδικοποίησης με ανεξάρτητο στάδιο ενίσχυσης που προσφέρει επίσης ισορροπημένη έξοδο. Αν και πολύ συμπαγές, το Shanling UA 2 ενσωματώνει ένα ισχυρό κύκλωμα ήχου που βασίζεται σε ένα τσιπ ESS ES9038Q2M, ένα στοιχείο αναφοράς για εφαρμογές High Fidelity που ενσωματώνουν δυνατότητες μετατροπής ψηφιακού σε αναλογικό. Από την πλευρά του DAC, το UA2 είναι σε θέση να αναπαράγει αρχεία ήχου υψηλής ανάλυσης έως 768 kHz / 32 bit και ακόμη και DSD έως και DSD512. Το στάδιο εξόδου είναι χτισμένο γύρω από ένα τσιπ RT6838 ικανό να αναπτύξει ισχύ έως 125 mW στα 32 Ohm με ελάχιστο επίπεδο θορύβου, το οποίο αντιπροσωπεύει ένα ασύγκριτο κέρδος απόδοσης σε σύγκριση με τις παραδοσιακές εξόδους ήχου των φορητών συσκευών πολυμέσων γενικού κοινού.

Portable DAC/Headphone Amplifier Simply without equal. Mojo 2 is the most advanced DAC/headphone amplifier in the world. It plays your favourite music with class-leading detail and clarity, right up to studio-grade levels.Dac And Headphone Amplifier In OneThe British designed, engineered and built Mojo 2 is the most advanced portable DAC and headphone amplifier in the world.Distinctly different from all other devices, Mojo 2 uses proprietary British digital audio technology perfected over more than two decades, coupled to a powerful ‘FPGA’ processor. The result is class-leading sound quality both on the move or at home, with the power to effortlessly drive any headphones. For music just as the artist intended, Mojo 2 brings you closer to the music than any other portable.Unique Fpga Technology For more than 20 years, Chord Electronics has exclusively used powerful programmable (FPGA) circuits with custom coding to provide the most advanced digital-to-analogue conversion performance in the world. With digital audio technologies perfected over two decades, Mojo 2 contains more digital audio know-how than any other small DAC, resulting in unrivalled sound quality, all backed by peerless technical measurements from the lab.Compatible With Poly For Streaming Completely compatible with our Wireless streaming module Poly, Poly allows for wireless integration to your system…Mojo 2 offers several ways to connect to digital devices, including smartphones, tablets and laptops, plus two 3.5 mm headphone outputs, meaning two can listen simultaneously. Digital inputs include fast-transfer USB-C, Micro-USB, optical and coaxial, with charging via a separate dedicated Micro-USB input.Mojo polychromatic light-up buttons offer simple control with an additional visual guide to the device’s settings. A new menu button offers navigation through a new range of features, including the all-important completely transparent UHD DSP function.

Φορητό DAC/ ενισχυτής ακουστικών με επαναφορτιζόμενη μπαταρία και Bluetooth DSD, DXD, PCM, MQA DAC 500mW Direct Drive ενισχυτής ακουστικών.

Το Audioengine D3 Premium 24-Bit DAC (μετατροπέας από ψηφιακό σε αναλογικό σήμα) σας επιτρέπει να παρακάμψετε την κάρτα ήχου του υπολογιστή σας ή την έξοδο των ακουστικών σας και να στείλετε τον ήχο μέσω USB. Το D3 είναι ο τέλειος ψηφιακός αντάπτορας μεταξύ του υπολογιστή σας και του μουσικού σας συστήματος. Η εγκατάσταση είναι εύκολη. Το D3 συνδέεται απευθείας σε μια θύρα USB του υπολογιστή σας, ώστε να μην απαιτείται εξωτερική παροχή ρεύματος ή καλώδια. Η έξοδος του συνδέεται με ακουστικά, αυτοενισχυόμενα ηχεία ή οποιοδήποτε σύστημα ήχου. Το D3 DAC είναι ο ιδανικός τρόπος για να έχετε υπέροχη μουσική όχι μόνο από τον υπολογιστή σας μέχρι τα ακουστικά, αλλά και από τον υπολογιστή σας σε οποιοδήποτε μουσικό σύστημα. Σχεδιασμένο Για Τους Λάτρεις Της Μουσικής Ο ενισχυτής ακουστικών υψηλής απόδοσης σχεδιάστηκε για ένα ευρύ φάσμα ακουστικών για να ικανοποιήσει ακόμα και τον πιο απαιτητικό λάτρη της μουσικής με την υψηλή απόδοση και τον αποκαλυπτικό του ήχο. 

Super light. Super sound. The new GO blu, pocket-rocket portable HD DAC/amp, is diminutive enough to take with you wherever you go! It gives you best sound from wired but the convenience of wireless as you no longer need to have a cable connection to your smartphone. Whether you’re exercising at the gym with your Apple watch clocking your every step or catching up on your MacBook at your favourite coffee shop, the GO blu is the perfect companion. It pairs wirelessly with your source device via Bluetooth with no need to worry about whether you’ve got the right cable for your Android or Apple device. Just pair … and GO! Superior sound. Unbound. Wireless headphones or earphones of any kind integrate Bluetooth processing, D/A conversion and amplification onto one, standard ‘off the shelf’ chip. There is a ceiling to the sound quality that can be achieved. Team good corded headphones or in-ear monitors, with a separate, high-quality portable DAC/headphone amp, and your sound quality will beat any pair of wireless headphone or earphones hands down. Using the GO blu means no compromise on sound quality. Pair the GO blu to your Apple/Android. Connect your favourite corded headphones to the GO blu and then tuck it away –  it’s so petite it will slip into your running gear or suit pocket. It’s also gorgeous enough to show off by leaving it on the table at your favourite coffee shop! GO blu. Go beyond. With its lightweight, soft-touch polymer enclosure (great for Bluetooth reception, unlike signal-blocking metal), copper-coloured trim and ChronoDial watch crown-style control, the GO blu is a pleasure to use wherever you go. iFi has even incorporated a high-quality chip-based (CMOS-MEMS) microphone, enabling hands-free calls, voice chat for gaming and access to voice assistants such as Apple Siri and Google Assistant. Further flexibility is provided by the USB-C charging port, which doubles as an audio input enabling USB connection from source devices that don’t offer Bluetooth connectivity. Hi-res PCM audio data up to24-bit/96kHz is supported when the GO blu is connected in this way. HD Bluetooth 5.1 The way iFi implements Bluetooth is anything but ‘run of the mill’ and despite its diminutive size the GO blu is no exception. The use of Qualcomm’s latest four-core QCC5100 Bluetooth processing chip ensures that every current high-definition Bluetooth audio format is supported. aptX Adaptive and aptX HD LDAC and HWA/LHDC regular aptX and aptX Low Latency AAC SBC (plain vanilla Bluetooth) This means that every possible source device is handled at the highest audio resolution its Bluetooth specification allows – no other pocket-size DAC/amp delivers such comprehensive codec support, or such high-quality sound over Bluetooth. The GO blu is Bluetooth v5.1-compliant, ensuring the best possible range, stability and performance, and its ‘Bluetooth engine’ can be updated over the air. Three. Unique. Stages. Bluetooth. DAC. Amplifier. Most pocket-size Bluetooth DAC/headphone amps incorporate all-in-one ‘system on a chip’ solutions to deliver input processing, digital-to-analogue signal conversion and amplification. These are simple and cost-effective, but they cannot compare with expertly designed, individually optimised circuit stages when it comes to sound quality. Uniquely for a device of this type and size, the GO blu’s clever design packs in separate Bluetooth + DAC + Amp stages, each engineered in distinct blocks to deliver the ideal combination of cutting-edge specification and superb sound. Others just don’t this level of execution. The Bluetooth stage makes full use of Qualcomm’s latest four-core QCC5100 Bluetooth chip and supports every current high definition format. This then feeds the DAC stage with a Cirrus Logic 32-bit DAC chip at its heart. This is coupled with a customised digital filter to minimise pre-echoes and ringing artefacts, and a precision clock system to ensure ultra-low jitter, thus reducing errors and distortion in the digital audio signal. The amp circuitry benefits from symmetrical twin-mono signal paths and utilises iFi’s Direct Drive design concept – direct-coupled to ensure a clean signal path without distortion-inducing output coupling capacitors. The amp stage delivers up to 5.6V (twice the voltage of others) – considerably more power than other similarly sized devices – handling even relatively tough headphone loads with ease. To ensure signal strength suits the sensitivity of the connected headphones or earphones, auto-gain adjusts output up or down by 6dB.

COBALT'S PRECEDENT-SETTING PERFORMANCE IS MADE POSSIBLE BY MULTIPLE SIGNIFICANT UPGRADES: New, more advanced ESS ES9038Q2M DAC chip with a minimum-phase slow roll-off filter for more natural sound. Microchip's superb PIC32MX274 microprocessor draws less current and increases processing speed by 33%. Improved power-supply filtering that specifically increases immunity to WiFi, Bluetooth, and cellular noise. Includes a form-fitting DragonTail female USB-A to male USB-C Adaptor.All DragonTails use AQ's Carbon-level USB cable. AUDIOQUEST, GORDON RANKIN: A BEAUTIFUL PARTNERSHIP Like all previous DragonFly models, Cobalt uses Gordon Rankin's precedent-setting StreamLength® asynchronous-transfer USB code. Further, in Gordon's monoClock® technology, a single ultra-low-jitter clock generated from the ESS ES9038Q2M DAC chip runs the ESS chip functions as well as all microcontroller functions. This superior clock enables DragonFly Cobalt to provide greater resolution and clarity than DACs with multiple clocks. WHY THE "SLOW ROLL...?" Cobalt employs ESS's new flagship ES9038Q2M DAC chip. While the chips used in DragonFlys Black and Red are unbeatable for the price, the minimum-phase slow roll-off filter in the 9038 results in naturally expressive sound that is always emotionally engaging and never fatiguing—a beautiful combination of warmth and detail that we find equally exciting and soothing. KILLING THE NOISE In Cobalt, we've taken what we've learned from our recent research and development in noise dissipation to employ power-supply filtering specifically designed to dramatically reduce the increasingly prevalent noise from WiFi, Bluetooth, and cellular signals. Successfully combating this noise is absolutely crucial to the preservation of the lowest-level musical details, particularly when it comes to high-res audio—and especially when applied to a portable-audio device such as DragonFly. BIT-PERFECT VOLUME CONTROL AND 2.1-VOLT OUTPUT Cobalt features the same ESS Sabre 9601 headphone amp and bit-perfect volume control that give DragonFly Red its unique combination of power and grip over the music. This solution ensures maximum fidelity, thrilling dynamic contrast, and excellent signal-to-noise ratio. The 2.1-volt output makes Cobalt and Red compatible with a wide range of headphones, including power-hungry, low-efficiency models. FIRMWARE UPGRADEABLE DragonFlys Black, Red, and Cobalt are firmware upgradeable via our free Desktop Device Manager. In today's fast-paced digital world, longevity in a hi-fi component is increasingly rare—at any price. AudioQuest believes that today's digital devices should evolve as technology itself evolves, thereby delivering musical pleasure for many years to come. Our Desktop Device Manager will also allow you to identify your DragonFly's serial number and software version to ensure that the device is up to date. BEAUTIFUL SOUND IN A SMALLER PACKAGE... AND NOW WITH A TAIL All this goodness is packed into a sleek new case that measures just 2.26" x 0.73" x 0.47" (57.5mm x 18.6mm x 11.9mm), making the latest DragonFly 10% smaller and even a bit more pocket-friendly. Finally, to easily accommodate the increasing number of electronic devices that feature USB-C ports, DragonFly Cobalt comes with AudioQuest's USB-A to USB-C adaptor. THE REST OF THE DRAGONFLY FLEET: DRAGONFLYS BLACK AND RED While the original DragonFly created a new category of portable DAC, its USB power draw made it compatible with computers only. Black and Red answered the call of music lovers everywhere for DragonFlys that could be used with Apple iOS mobile devices and Android smartphones and tablets. These DACs proved for once and for all that convenience and performance need no longer be mutually exclusive. All current-production DragonFly models incorporate 32-bit ESS Sabre DAC chips. The DAC chips we’ve selected are remarkably powerful and sophisticated, yet we’ve intentionally limited DragonFly’s processing capabilities to 24-bit/96kHz resolution. This makes using DragonFly as simple as it’s always been: All models are fully compatible with PCs without having to download and install new drivers. Most importantly, DragonFly is designed to honor the music you already own and love. Whether you’re listening to Spotify, YouTube, Tidal, Qobuz, ripped CDs, or state-of-the-art high-resolution files, DragonFly will deliver a more emotionally compelling and enjoyable experience. STREAM TIDAL MASTERS EVERYWHERE DragonFlys Black, Red, and Cobalt support Tidal Masters (MQA) playback from iPhones and Android smartphones. MQA's technology folds high-resolution files into smaller files that can be streamed on the go. As MQA Renderers, DragonFlys Black, Red, and Cobalt complete the unfolding process, allowing music lovers to enjoy a wider selection of high-res music. STREAM QOBUZ’S VAST CATALOG OF OUTSTANDING HI-RES MUSIC DragonFlys Black, Red, and Cobalt support Qobuz high-res playback from iPhones, Android smartphones, and MacOS and Windows computers. Qobuz streams and downloads music in bit-perfect FLAC, the most widely used format for mastering and archiving, at resolutions of up to 24-bit/192kHz. With DragonFlys Black, Red, and Cobalt, listeners can enjoy more than 40 million tracks in lossless 16-bit CD resolution and over 2 million hi-res files. NATURALLY BEAUTIFUL SOUND IS RIGHT AT YOUR FINGERTIPS Whatever music turns you on, wherever you are, an AudioQuest DragonFly USB DAC delivers inspiring, dynamic, and beautiful sound to earbuds, headphones, powered speakers, or complete audio systems. With a DragonFly, music appreciation and exploration are limitless: Plug into an Apple or Windows® computer or connect to an iOS® or Android mobile device. Play YouTube or Vimeo videos. Go hunting on Bandcamp or SoundCloud. Explore playlists on Spotify or Pandora. Stream high-res audio from Tidal or Qobuz. No matter the choice of musical pleasure, DragonFly delivers beautiful sound, unraveling the emotional expression and nuance that makes music and movies so enjoyable. Now, more than ever before, naturally beautiful sound is right at your fingertips—however you want it, whenever you want it.

Το DragonFly Black είναι ένας ψηφιακός αναλογικός μετατροπέας USB (DAC) που έχει σχεδιαστεί για να παρέχει καθαρότερο,σαφέστερο, πιο φυσικό ήχο από οποιονδήποτε υπολογιστή, smartphone ή tablet.Ο μοναδικός σχεδιασμός του DragonFly Black επιτρέπει την αναπαραγωγή οποιουδήποτε τύπου αρχείου ανεξάρτητα από την ανάλυση. Το DragonFly Black είναι ικανό να αποκωδικοποιεί δεδομένα 24 bit / 96 kHz. (Για αρχεία με υψηλότερους ρυθμούς δειγματοληψίας, του υπολογιστή ή της κινητής συσκευή σας, σε συνδυασμό με την αναπαραγωγή τουλογισμικού, θα επαναλάβει τα δεδομένα σε συμβατή ανάλυση.Το DragonFly Black χρησιμοποιεί ένα μοναδικό σύστημα ρολογιών που ονομάζεται Hybrid-PLL.Το Υβριδικό-PLL εκτελεί ίσο ή καλύτερο από πολλά διακεκριμένα συστήματα ρολογιών.Το DragonFly Black έχει σχεδιαστεί για να είναι "plug and play" με όλα τα λειτουργικά συστήματα, όπως το Android, η Apple και η Microsoft.

Το DragonFly συνδέεται στη θύρα USB ενός υπολογιστή για να παρακάμψει τα κυκλώματα ήχου του υπολογιστή και να προσφέρει πιο καθαρό,πιο φυσικό ήχο στα ακουστικά, τα ηχεία και τα πλήρη ηχητικά συστήματα. Μικρό, προσιτό, εύκολο στη χρήση και εξαιρετικά αποτελεσματικό. Για μεγαλύτερη συνολική απόδοση, τα νέα μοντέλα DragonFly ενσωματώνουν επίσης βελτιωμένες μάρκες ESS Sabre DAC 32-bit οι οποίες χρησιμοποιούν φιλτράρισμα ελάχιστης φάσης για φυσικό λεπτομερέστερο και πιο αυθεντικό ήχο.Tο DragonFly Red περιλαμβάνει τον τελευταίο ενισχυτή ακουστικών ESS και ένα κομψό ψηφιακό έλεγχο έντασης που βρίσκεται στο τσιπ DAC 9016 - μια εξελιγμένη εφαρμογή που εξασφαλίζει τη μέγιστη πιστότητα, τη δυναμική αντίθεση και τη σχέση σήματος προς θόρυβο.Το πιο σημαντικό, το DragonFly έχει σχεδιαστεί για να τιμήσει τη μουσική που ήδη κατέχετε και αγαπάτε. Είτε ακούτε το Spotify, το YouTube, το Tidal, τα τραγανισμένα CD ή τα υπερσύγχρονα αρχεία υψηλής ανάλυσης, το DragonFly θα σας προσφέρει μια πιο συναρπαστική και ευχάριστη εμπειρία.

Φορητός προενισχυτής (DAC) υψηλής ποιότητας 24bit/192kHz για ακουστικά. Σύνδεση USB με PC/Mac. Ενσωματωμένη τεχνολογία Constant Current Drive η οποία δίνει στα περισσότερα ακουστικά του εμπορίου ομοιόμορφο ηχητικό αποτέλεσμα με πλούσιο συχνοτικό εύρος, Quad Sum DAC τεχνολογία για χαμηλά επίπεδα θορύβου και εξάλειψη της παραμόρφωσης.Μέγιστη έξοδος 225mW στα 30 Ohm. Διαθέτει 2 knobs για την ρύθμιση της έντασης, 3 led για τις ενδείξεις της στάθμης και έξοδο ακουστικών. Ελαφρύ σώμα από αλουμίνιο. Κατασκευασμένο στις ΗΠΑ.

hiFace DAC 384/32 φορητός ασύγχρονος ψηφιοαναλογικός μετατροπέας. Υποστηρίζει ασύγχρονη σύνδεση με τον υπολογιστή και αναπαραγωγή έως 384kHz-32 bits και μπορεί να συνδεθεί απευθείας με ενισχυτή ή ευαίσθητα ακουστικά. Είσοδος: USB. Έξοδος: stereo jack. Output voltage: 2.0Vrms @10kOhms. THD+N: 112dB (@ 1kHz, A-weighted) Συμβατότητα Windows:Direct Sound, Kernel Streaming, WASAPI και ASIO. Συμβατότητα Mac: Integer mode και Direct mode. Συμβατότητα Linux.Χαρακτηριστικά:Connections: Input 1 x USB A type maleOutput 1 x 3.5mm stereo jack socket
I/OStandard: Input USB 2.0 Audio Format, Output stereo analogSampling Frequency 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4khZ, 192kHz, 352.8kHz, 384kHz
Resolution 16 up to 32 bitOutput voltage: 2.0Vrms @10kOhmsFrequency response: 5-22kHz (fs=44.1kHz) - 5-150kHz (fs=384kHz)THD+N: 112dB (@ 1kHz, A-weighted)Dimensions:8.8(d) x 1.4(h) x 2(w)
Power Supply:5V DC from USB bus
Temperature: 0°C to 70°C
Weight: 20gr approx.