Ηχεία Δαπέδου

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

The Spectrum X6 Bluetooth is the active floor-standing model in the Spectrum Series of speakers, which with its powerful 200W stereo built-in amplifier and multiple wired and wireless inputs, can play from a multitude of audio sources. This combination of versatility and latest technology creates the ultimate high quality audio system for any audio video installation in the home.Scandinavian design at its bestThe new Tangent Spectrum speaker series includes both passive and active speakers with a unique Danish design. All models are available in stylish cabinet enclosures in either midnight black or polar white, highly durable matt satin finishes with protective colour matched, integrated mesh grilles.  Contrasting walnut base plinths complete the aesthetic appeal across the range. Danish audio engineeringWith carefully developed and bespoke twin 130mm bass/mid drivers and 25mm tweeters housed in the handsome bass reflex cabinets, the new Tangent Spectrum X6 Bluetooth allows you to enjoy music and movies with the level of performance reserved only for floor standing speakers of this type. Automatic On / OffAn ingenious feature of the new Spectrum X6 Bluetooth speaker is the so-called "wake-on" signal on both Bluetooth and AUX inputs.  This feature allows the speaker to turn on or off when the source turns on or off.  It will then also enter standby mode after 20 minutes without a signal.  So if you’re playing your music via Bluetooth, the speaker will turn off when you stop playing music after 20 minutes.  It will then automatically turn on when the same music source starts playing again. Similarly, you can allow the speaker to turn on and off via the AUX input source (mini jack). Note that this function is limited to the last source that the speaker has played. TV speaker - operate the audio with your TV's remote controlIf your TV has a variable audio output that can be connected via an AUX cable (mini jack), you can use the Tangent Spectrum X6 Bluetooth speakers to improve the sound from your TV for your movie experience. This means you can control the volume of the speakers using your TV remote control.Remote Control for ease of operationA neat and convenient remote control is supplied with Tangent’s new Spectrum X6 Bluetooth speakers, making them easy to switch between sources, adjust volume and pair the speakers with different Bluetooth compatible devices.   Προδιαγραφές:Bluetooth 4.2 aptX"Wake on" AUX & Bluetooth2 x Digital input2 x Analogue inputPhono input (til turntables)Sub out​Χαρακτηριστικά:Input: Bluetooth, 3.5 mm AUX (Mini Jack), Analog RCA, Phono input, Optical Digital In, Coaxial inOutput: Subwoofer Out, Speaker terminals (stereo)Speaker Units: 2 x 5" midrange and bass / 1" tweeterSystem: 3-waysSensitivity: 90 dBFrequency: 50 Hz - 20 000 kHzRemote Control: YesPower: 2 x 60W Class DStandby:

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

Η σειρά Legacy της Elipson ζωντανεύει την εμπειρία HIFI στο σπίτι σας! Για την σχεδίαση αυτής της νέας σειράς, η Elipson εκμεταλλεύτηκε τις καινοτομίες που αναπτύχθηκαν για περισσότερα από 60 χρόνια μέσα από τα εμβληματικά μοντέλα της, όπως το ηχείο La Religieuse, το μοντέλο 4050 και το μοντέλο 1303, σε συνδυασμό με πιο σύγχρονα υλικά κατασκευής της εποχής μας. Η γρήγορη, φωτεινή και πεντακάθαρη απόκριση σε ολόκληρο το συχνοτικό φάσμα, η εκφραστικότητα στην μεσαία περιοχή και η αίσθηση της κίνησης που προσφέρει αυτό το ηχείου θα σας δώσει μια απόλυτα ρεαλιστική εικόνα της μουσικής που ακούτε στο χώρο σας! Όλα αυτά είναι τα βασικά στοιχεία που χαρακτηρίζουν τα ηχεία Legacy.Στο τέλος θα σας μείνει η αίσθηση ότι τα συγκεκριμένα ηχεία σας δίνουν την ευχαρίστηση να ακούτε την αγαπημένη σας μπάντα, σαν να είναι εκεί μπροστά στα μάτια σας! Σχεδιασμένα και κατασκευασμένα στη Γαλλία, η σειρά Legacy αποτελείται από ένα ηχείο βιβλιοθήκης το 3210 για μικρούς σχετικά χώρους και δύο ηχεία δαπέδου, το 3220 και το 3230 τη ναυαρχίδα της σειράς. Χαρακτηριστικά: Τύπος: Ηχείο Δαπέδου Ευαισθησία: 89 dB Αντίσταση: 6 Ohm Φινίρισμα: Καρυδιά + Σατινέ ασημί βελανιδιά + Σατινέ Μαύρο Διαστάσεις (Π x Υ x Β): 1105 × 276 × 360 Βάρος: 32.8 kg Πάχος Καμπίνας: 22-25 mm Bass Reflect: Πίσω Low-mid Woofer: 2x 165 χιλιοστά αλουμίνιο με κεραμική επίστρωση Ισχύς RMS: 150 W Απόκριση συχνότητας: 35Hz-30kHz

Η σειρά Legacy της Elipson ζωντανεύει την εμπειρία HIFI στο σπίτι σας! Για την σχεδίαση αυτής της νέας σειράς, η Elipson εκμεταλλεύτηκε τις καινοτομίες που αναπτύχθηκαν για περισσότερα από 60 χρόνια μέσα από τα εμβληματικά μοντέλα της, όπως το ηχείο La Religieuse, το μοντέλο 4050 και το μοντέλο 1303, σε συνδυασμό με πιο σύγχρονα υλικά κατασκευής της εποχής μας. Η γρήγορη, φωτεινή και πεντακάθαρη απόκριση σε ολόκληρο το συχνοτικό φάσμα, η εκφραστικότητα στην μεσαία περιοχή και η αίσθηση της κίνησης που προσφέρει αυτό το ηχείου θα σας δώσει μια απόλυτα ρεαλιστική εικόνα της μουσικής που ακούτε στο χώρο σας! Όλα αυτά είναι τα βασικά στοιχεία που χαρακτηρίζουν τα ηχεία Legacy.Στο τέλος θα σας μείνει η αίσθηση ότι τα συγκεκριμένα ηχεία σας δίνουν την ευχαρίστηση να ακούτε την αγαπημένη σας μπάντα, σαν να είναι εκεί μπροστά στα μάτια σας! Σχεδιασμένα και κατασκευασμένα στη Γαλλία, η σειρά Legacy αποτελείται από ένα ηχείο βιβλιοθήκης το 3210 για μικρούς σχετικά χώρους και δύο ηχεία δαπέδου, το 3220 και το 3230 τη ναυαρχίδα της σειράς. Χαρακτηριστικά: Τύπος: Ηχείο Δαπέδου Ευαισθησία: 89 dB Αντίσταση: 6 Ohm Φινίρισμα: Καρυδιά + Σατινέ ασημί βελανιδιά + Σατινέ Μαύρο Διαστάσεις (Π x Υ x Β): 1105 × 276 × 360 Βάρος: 32.8 kg Πάχος Καμπίνας: 22-25 mm Bass Reflect: Πίσω Low-mid Woofer: 2x 165 χιλιοστά αλουμίνιο με κεραμική επίστρωση Ισχύς RMS: 150 W Απόκριση συχνότητας: 35Hz-30kHz

Φέρτε το Cinema στο σπίτι σας ...Το Chora 826-D είναι το νέο ηχείο δαπέδου Dolby Atmos της Focal για εξαιρετικά ρεαλιστικά soundtracks και πλήρως τρισδιάστατη αίσθηση του ήχου στις ταινίες που παρακολουθείτε. Τοποθετημένο στην κορυφή του ηχείου, ένα επιπλέον μεγάφωνο πλήρους φάσματος κατευθύνει τον ήχο προς το ταβάνι και με την ανάκλαση υπό γωνία φτάνει πίσω στον ακροατή, διμιουργώντας την 3D αίσθηση του Dolby Atmos. Οι σκηνές δράσης στον αέρα, η βροχή και η βροντές, τώρα ζωντανεύουν ! Την ίδια στιγμή, το κατευθυντικό διάφραγμα του συγκεκριμένου ηχείου, σας επιτρέπει να εντοπίσετε τους ήχους σαν να είχατε ηχεία στην οροφή! Φανταστείτε μια σκηνή σε ένα σπίτι: ακούτε συζητήσεις, αλλά και το θόρυβο των βημάτων ... όλα αυτά σε τρεις διαστάσεις σαν να ήσαστε πραγματικά εκεί! Συνδυάζοντας τη γαλλική φινέτσα στην κατασκευή αλλά και στη σχεδίαση, το ηχείο αυτό ενσωματώνει επίσης μία τεχνολογία εστίασης, και συγκεκριμένα το μεγάφωνο από Slatefiber για τα Mid και Low ή το tweeter Aluminium / Magnesium TNF για μεγαλύτερη ζεστασιά και σαφήνεια στα πρίμα. Το Chora 826-D εγγυάται ένα συγκλονιστικό αποτέλεσμα. Το Tweeter TNFΜία αποκλειστική δημιουργία της Focal που κατασκευάζεται στη Γαλλία αποκλειστικά στα εργαστήρια της από κράμα αλουμινίου / μαγνησίου, αυτό το tweeter προσφέρει πολλά οφέλη, ειδικά στην χωροθέτηση του ήχου.Με αυτό το tweeter, εξασφαλίζεται η αρμονία και η ακρίβεια στον ήχο. Χαρακτηριστικά: Τύπος: 3-way bass-ανακλαστικό μεγάφωνο. Προγράμματα Οδήγησης Ηχείων: Μεγάλο tweeter με ανεστραμμένο θόλο TNF Al / Mg (16,5 cm) Woofer Slatefiber 61/2 "(16,5 cm) Midrange 1" (25 mm). Ευαισθησία (2.83V / 1m): 91dB Απόκριση Συχνότητας (± 3 dB): 48Hz-28kHz Low end (-6 dB): 39Hz Ονομαστική Αντίσταση: 8Ω Ελάχιστη Αντίσταση: 2,9Ω Συνιστώμενη Ισχύς Ενισχυτή: 40 / 250W Συχνότητα Crossover: 270Hz - 2.700Hz Διαστάσεις (ΠxΥxΔ):105,3cmx30,3x38,8cm Καθαρό Bάρος (με μάσκα):22,2 κιλά Διαστάσεις Συσκευασίας (HxWxD): 113x34x48cm Καθαρό βάρος (με συσκευασία): 27 κιλά

Η σειρά Legacy της Elipson ζωντανεύει την εμπειρία HIFI στο σπίτι σας! Για την σχεδίαση αυτής της νέας σειράς, η Elipson εκμεταλλεύτηκε τις καινοτομίες που αναπτύχθηκαν για περισσότερα από 60 χρόνια μέσα από τα εμβληματικά μοντέλα της, όπως το ηχείο La Religieuse, το μοντέλο 4050 και το μοντέλο 1303, σε συνδυασμό με πιο σύγχρονα υλικά κατασκευής της εποχής μας. Η γρήγορη, φωτεινή και πεντακάθαρη απόκριση σε ολόκληρο το συχνοτικό φάσμα, η εκφραστικότητα στην μεσαία περιοχή και η αίσθηση της κίνησης που προσφέρει αυτό το ηχείου θα σας δώσει μια απόλυτα ρεαλιστική εικόνα της μουσικής που ακούτε στο χώρο σας! Όλα αυτά είναι τα βασικά στοιχεία που χαρακτηρίζουν τα ηχεία Legacy.Στο τέλος θα σας μείνει η αίσθηση ότι τα συγκεκριμένα ηχεία σας δίνουν την ευχαρίστηση να ακούτε την αγαπημένη σας μπάντα, σαν να είναι εκεί μπροστά στα μάτια σας! Σχεδιασμένα και κατασκευασμένα στη Γαλλία, η σειρά Legacy αποτελείται από ένα ηχείο βιβλιοθήκης το 3210 για μικρούς σχετικά χώρους και δύο ηχεία δαπέδου, το 3220 και το 3230 τη ναυαρχίδα της σειράς. Χαρακτηριστικά: Τύπος: Ηχείο Δαπέδου Ευαισθησία: 91 dB Αντίσταση: 6 Ohm Φινίρισμα: Καρυδιά + Σατινέ ασημί βελανιδιά + Σατινέ Μαύρο Διαστάσεις (Π x Υ x Β): 1340 × 347 × 450 mm Βάρος: 50 kg Πάχος Καμπίνας: 22-25 mm Mid Woofer: 150mm Bass Woofers: 2 x 210mm Ισχύς RMS: 200 W Απόκριση συχνότητας: 25Hz-30kHz

Η σειρά Legacy της Elipson ζωντανεύει την εμπειρία HIFI στο σπίτι σας! Για την σχεδίαση αυτής της νέας σειράς, η Elipson εκμεταλλεύτηκε τις καινοτομίες που αναπτύχθηκαν για περισσότερα από 60 χρόνια μέσα από τα εμβληματικά μοντέλα της, όπως το ηχείο La Religieuse, το μοντέλο 4050 και το μοντέλο 1303, σε συνδυασμό με πιο σύγχρονα υλικά κατασκευής της εποχής μας. Η γρήγορη, φωτεινή και πεντακάθαρη απόκριση σε ολόκληρο το συχνοτικό φάσμα, η εκφραστικότητα στην μεσαία περιοχή και η αίσθηση της κίνησης που προσφέρει αυτό το ηχείου θα σας δώσει μια απόλυτα ρεαλιστική εικόνα της μουσικής που ακούτε στο χώρο σας! Όλα αυτά είναι τα βασικά στοιχεία που χαρακτηρίζουν τα ηχεία Legacy.Στο τέλος θα σας μείνει η αίσθηση ότι τα συγκεκριμένα ηχεία σας δίνουν την ευχαρίστηση να ακούτε την αγαπημένη σας μπάντα, σαν να είναι εκεί μπροστά στα μάτια σας! Σχεδιασμένα και κατασκευασμένα στη Γαλλία, η σειρά Legacy αποτελείται από ένα ηχείο βιβλιοθήκης το 3210 για μικρούς σχετικά χώρους και δύο ηχεία δαπέδου, το 3220 και το 3230 τη ναυαρχίδα της σειράς. Χαρακτηριστικά: Τύπος: Ηχείο Δαπέδου Ευαισθησία: 91 dB Αντίσταση: 6 Ohm Φινίρισμα: Καρυδιά + Σατινέ ασημί βελανιδιά + Σατινέ Μαύρο Διαστάσεις (Π x Υ x Β): 1340 × 347 × 450 mm Βάρος: 50 kg Πάχος Καμπίνας: 22-25 mm Mid Woofer: 150mm Bass Woofers: 2 x 210mm Ισχύς RMS: 200 W Απόκριση συχνότητας: 25Hz-30kHz

Maestro Utopia Evo has become a three-way floorstanding loudspeaker in order to make it more versatile and easier to install in your listening room. The bass is very consistent but it still retains Maestro’s characteristic dynamic range and punch. The mid-range register hasn’t been neglected: we have integrated our latest technical innovations. In conclusion, each register reproduced by Maestro Utopia Evo has been enhanced for even more precision and dynamic range. Evo stands for evolution... Since 2008, when Utopia III was launched, Focal’s technological heritage has grown enormously. Therefore it was essential to integrate the most recent innovations into this exceptional collection. The sound architecture of Utopia III has been preserved, with the constant intention of reducing harmonic distortion in the fragile mid-range register, which is so very crucial for revealing the artist’s emotions. The two loudspeakers are equipped with Focal’s latest innovations, the NIC (Neutral Inductance Circuit) and the TMD (Tuned Mass Damping) suspension. Maestro Utopia Evo now offers bi amplification, just like Grande Utopia EM and Stella. Discerning music lovers will be able to fine-tune the type of sound, depending on the timbre and the power they’re looking to achieve. The best components from their generation have also found their way into the Utopia III Evo line: cables made in France, denser acoustic materials inside the subwoofer, double terminal boards and separate crossovers. New finishes with distinctive colour-ways offer many options for today’s contemporary spaces. The 2017 edition of Utopia III Evo is an iconic line. They integrate a whole range of innovations and essential detailing, making them completely unique. They are still way ahead of any other line.

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

Το νέο ηχείο της Focal Chora 816, είναι ένα ηχείο δαπέδου 2.5 δρόμων με πλούσια μπάσα. Τα woofer του και ο οδηγός των μεσαίων-χαμηλών, διαθέτουν τον καινούριο κώνο της Focal με την τεχνολογία Slatefiber, δουλεύουν σε τέλεια αρμονία για υπέροχη αναπαραγωγή ήχου και τέλεια απόκριση στα χαμηλά. Ο ήχος απλώνεται ομοιόμορφα στην αίθουσα ακρόασης, με δυναμική μεσαία περιοχή και αξιοσημείωτη ισχύ στις χαμηλές.Η μπροστινή οπή στο μεγάφωνο μειώνει την παραμόρφωση και χάρη στην κλίση της βάσης ,η Time Alignment παρέχει ένα ηχητικό πεδίο εστιασμένο στον ακροατή. Το νέο Chora 816 είναι εξαιρετική επιλογή και για Home Cinema εφαρμογές ακούγοντας έναν πλούσιο και ζεστό ήχο σε δωμάτια μέχρι 30m².Tweeter TNF Αλουμινίου / Μαγνησίου - μαλακά και με ακρίβεια πρίμα. Στην κατασκευή του τοιχώματος του tweeter διαθέτει ένα αφρώδες υλικό που ονομάζεται Poron. Αυτό το υλικό χρησιμοποιείται στο διάσημο tweeter Beryllium του Utopia και μειώνει την παραμόρφωση κατά ένα τρίτο μεταξύ 2.000Hz και 3.000Hz εκεί που έχουμε την μεγαλύτερη ευαισθησία του ανθρώπινου αυτιού. Η πολύ μεγάλη κατευθυντικότητα του ανεστραμμένου θόλου επιτρέπουν την μέγιστη ποιότητα ακρόασης από οποιοδήποτε σημείο του σαλονιού και αν ακούτε.Εξαιρετικά ισορροπημένος ήχος - Ο κώνος από SlatefiberΗ τεχνολογία Slatefiber, αποκλειστικότητα της Focal, περιλαμβάνει τη χρήση ανακυκλωμένων ινών άνθρακα που εφαρμόζονται ως σάντουιτς μεταξύ δύο στρωμάτων θερμοπλαστικού πολυμερούς. Στην προσπάθειά για τελειότητα, οι μηχανικοί της Focal επέλεξαν να χρησιμοποιήσουν ίνες άνθρακα, που καταφέρνουν να επιτύχουν ακόμη μεγαλύτερη ακαμψία και μέγιστη απόσβεση. Κατασκευασμένο στα εργαστήρια μας με τα νέα υπερσύγχρονα εργαλεία της εταιρίας, το μεγάφωνο από "σχιστόλιθο" παρέχει καλύτερη απόσβεση και ακαμψία, σε συνδυασμό με την ελαφρότητα - τα τρία "βασικά" στοιχεία που διακρίνουν ένα καλό μεγάφωνο.Κομψό και μοντέρνο σχέδιοΗ σειρά Chora προσφέρει ένα μοντέρνο σχεδιασμό, με υψηλά σχεδιαστικά standards.Η βάση (προαιρετικά) είναι κεκλιμένη για σωστό Time Alignment και παρέχει βέλτιστη στερεοφωνική εικόνα, πιο εστιασμένη στον ακροατή.

The Prestige Facet 14F is a 2-and-a-half-way floorstanding speaker. Equally clear and detailed in the highs as it is deep and lively in the lows, this speaker will allow you to rediscover your favorite tracks. The Elipson Prestige Facet 14F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 14F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This floorstanding speaker is equipped with a bass driver and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 14F's high sensitivity allows it to be paired with any amplifier with a power rating of 150 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 2½ Power 150 W RMS Tweeter1 " Mid-bass driver 6,5 " Woofer 6,5 " Frequency Response (±3 dB)38 Hz - 25 kHz Sensitivity 92 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)238 x 1026 x 351 mm Weight20,5 kg Dimensions packaging (W x H x D)315 x 1120 x 400 mm Weight with packaging, unit22,6 kg

A tall, 3-and-a-half-way model, the Prestige Facet 24F has a commanding presence thanks to its elegant design and impressive sonic performance, which combines finesse with power. The Elipson Prestige Facet 24F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 24F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-and-a-half-way floorstanding speaker is equipped with two 20 cm bass drivers and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 24F's high sensitivity allows it to be paired with any amplifier with a power rating of 250 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 3 1/2 Power 250 W RMS Tweeter 1 " Mid-bass driver 6,5 " Woofer 2 x 8 " Frequency Response (±3 dB)28 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)274 x 1137 x 383 mm Weight26,5 kg Dimensions packaging (W x H x D)350 x 1225 x 460 mm Weight with packaging, unit29,9 kg

A tall, 3-and-a-half-way model, the Prestige Facet 24F has a commanding presence thanks to its elegant design and impressive sonic performance, which combines finesse with power. The Elipson Prestige Facet 24F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 24F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-and-a-half-way floorstanding speaker is equipped with two 20 cm bass drivers and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 24F's high sensitivity allows it to be paired with any amplifier with a power rating of 250 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 3 1/2 Power 250 W RMS Tweeter 1 " Mid-bass driver 6,5 " Woofer 2 x 8 " Frequency Response (±3 dB)28 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)274 x 1137 x 383 mm Weight26,5 kg Dimensions packaging (W x H x D)350 x 1225 x 460 mm Weight with packaging, unit29,9 kg

A tall, 3-and-a-half-way model, the Prestige Facet 24F has a commanding presence thanks to its elegant design and impressive sonic performance, which combines finesse with power. The Elipson Prestige Facet 24F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 24F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-and-a-half-way floorstanding speaker is equipped with two 20 cm bass drivers and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 24F's high sensitivity allows it to be paired with any amplifier with a power rating of 250 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 3 1/2 Power 250 W RMS Tweeter 1 " Mid-bass driver 6,5 " Woofer 2 x 8 " Frequency Response (±3 dB)28 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)274 x 1137 x 383 mm Weight26,5 kg Dimensions packaging (W x H x D)350 x 1225 x 460 mm Weight with packaging, unit29,9 kg

The Prestige Facet 14F is a 2-and-a-half-way floorstanding speaker. Equally clear and detailed in the highs as it is deep and lively in the lows, this speaker will allow you to rediscover your favorite tracks. The Elipson Prestige Facet 14F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 14F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This floorstanding speaker is equipped with a bass driver and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 14F's high sensitivity allows it to be paired with any amplifier with a power rating of 150 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 2½ Power 150 W RMS Tweeter1 " Mid-bass driver 6,5 " Woofer 6,5 " Frequency Response (±3 dB)38 Hz - 25 kHz Sensitivity 92 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)238 x 1026 x 351 mm Weight20,5 kg Dimensions packaging (W x H x D)315 x 1120 x 400 mm Weight with packaging, unit22,6 kg

The Prestige Facet 14F is a 2-and-a-half-way floorstanding speaker. Equally clear and detailed in the highs as it is deep and lively in the lows, this speaker will allow you to rediscover your favorite tracks. The Elipson Prestige Facet 14F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 14F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This floorstanding speaker is equipped with a bass driver and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 14F's high sensitivity allows it to be paired with any amplifier with a power rating of 150 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 2½ Power 150 W RMS Tweeter1 " Mid-bass driver 6,5 " Woofer 6,5 " Frequency Response (±3 dB)38 Hz - 25 kHz Sensitivity 92 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)238 x 1026 x 351 mm Weight20,5 kg Dimensions packaging (W x H x D)315 x 1120 x 400 mm Weight with packaging, unit22,6 kg

Leveraging over 70 years of acoustic technology, the Klipsch RP-6000F floorstanding speaker delivers incredible acoustic clarity for a premium listening experience. Features: 1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn Dual 6.5" Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Dual binding posts for bi-wire/bi-amp Strong, Flexible Removable Magnetic Grille Dimensions: 39.62” x 9.35” x 17.02” HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the RP-6000F floorstanding speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible. HORN ANATOMYKlipsch Reference Premiere series speakers feature a compressed molded silicon face thats matted to the 90x90 Tractrix horn to reduces horn resonance for a smoother frequency response. Klipsch computer modeled phase plugs acts as a mechanical filter to further ensure a smooth, flat frequency response while protecting the tweeter from damage. ALL-NEW VENTED TWEETERA vented tweeter design reduces standing waves behind the tweeter diaphragm for a smoother high frequency reproduction. The titanium tweeter diaphragm's light weight yet rigid composition exceeds the performance of aluminum, polymer or silk tweeters. Klipsch award-winning Linear Travel Suspension technology leverages a piston motion of the titanium diaphragm that lowers distortion and delivers real-to-life sound. A ceramic magnet housing provides premium performance, Klipsch Reference Premiere tweeters set the standard in acoustic reproduction. CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the RP-6000F floorstanding speaker signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency. WOOFER ANATOMYKlipsch Cerametallic™ cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity. Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution. TRACTRIX® PORT + DUAL TERMINALSThe rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. The RP-6000F floorstanding speaker features dual input terminals so you can bi-wire or bi-amp your speakers for a custom, high-performance experience. FINISHED TO PERFECTIONThe RP-6000F ebony and walnut finishes boast satin painted baffles with a scratch resistant design. The cast aluminum feet provides a modern look with less resonance than MDF or ABS plastic. It is mechanically designed to minimize surface area in contact with the floor, decoupling the speaker for faster, tighter low frequencies and more detail.

Leveraging over 70 years of acoustic technology, the Klipsch RP-6000F floorstanding speaker delivers incredible acoustic clarity for a premium listening experience. Features: 1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn Dual 6.5" Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Dual binding posts for bi-wire/bi-amp Strong, Flexible Removable Magnetic Grille Dimensions: 39.62” x 9.35” x 17.02” HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the RP-6000F floorstanding speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible. HORN ANATOMYKlipsch Reference Premiere series speakers feature a compressed molded silicon face thats matted to the 90x90 Tractrix horn to reduces horn resonance for a smoother frequency response. Klipsch computer modeled phase plugs acts as a mechanical filter to further ensure a smooth, flat frequency response while protecting the tweeter from damage. ALL-NEW VENTED TWEETERA vented tweeter design reduces standing waves behind the tweeter diaphragm for a smoother high frequency reproduction. The titanium tweeter diaphragm's light weight yet rigid composition exceeds the performance of aluminum, polymer or silk tweeters. Klipsch award-winning Linear Travel Suspension technology leverages a piston motion of the titanium diaphragm that lowers distortion and delivers real-to-life sound. A ceramic magnet housing provides premium performance, Klipsch Reference Premiere tweeters set the standard in acoustic reproduction. CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the RP-6000F floorstanding speaker signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency. WOOFER ANATOMYKlipsch Cerametallic™ cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity. Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution. TRACTRIX® PORT + DUAL TERMINALSThe rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. The RP-6000F floorstanding speaker features dual input terminals so you can bi-wire or bi-amp your speakers for a custom, high-performance experience. FINISHED TO PERFECTIONThe RP-6000F ebony and walnut finishes boast satin painted baffles with a scratch resistant design. The cast aluminum feet provides a modern look with less resonance than MDF or ABS plastic. It is mechanically designed to minimize surface area in contact with the floor, decoupling the speaker for faster, tighter low frequencies and more detail.

The Klipsch R-820F floorstanding speaker fills your room with amazing detail and clarity. Leveraging our proprietary horn-loaded technology and featuring dual 8" spun-copper IMG woofers, the R-820F delivers lifelike acoustics that bring your music and movies to life. Features : 1" Aluminum LTS tweeter 90x90 Square Tractrix Horn Dual 8" Spun-Copper IMG Woofers Bass-Reflex via Rear-Firing Tractrix ports Strong, Flexible Removable Magnetic Grille Dimensions: 43" x 10.9" x 17.5" Tractrix Horn TechnologyKlipsch exclusive 90x90º Tractrix horn technology ensures the high frequency energy is aimed at the listener and reduces artificial reverb or filtering caused by indirect sound bouncing off of walls. Using this proprietary focused technology gives you the best clarity, dynamics, and detail from your movies and music. Linear Travel Suspension TweeterKlipsch exclusive Linear Travel Suspension (LTS) aluminum tweeter minimizes distortion for enhanced, detailed performances. Using Kapton, an extremely light and rigid material, in the tweeter suspension provides high efficiency and improve resolution and detail. LTS tweeters are a hallmark of Klipsch speakers, making them some of the best speakers in the world. Spun Copper Img WoofersInjection Molded Graphite (IMG) woofer cones are exceptionally light while being extremely rigid – providing remarkable low frequency response, with minimal cone breakup and distortion. When paired with the Tractrix Horn-Loaded LTS Tweeter, it provides speaker efficiency highest in its class. Rear Tractrix PortThe rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. Sleek DesignExposed fasteners, angled feet, low profile magnetic grilles and a scratch-resistant, textured wood grain vinyl give the speaker a polished, modern appearance. High Quality Cabinet DesignReinforced MDF construction reduces cabinet vibration for less audible coloration and improved sonic accuracy - giving you the ultimate listening experience that's built to last. Scratch-Resistant, Textured Wood Grain VinylStylish aesthetic with absolute durability that results in a seamless integration into any décor. Add Dolby AtmosThe addition of elevation speakers reflects sound from the ceiling to put sound anywhere in your room it needs to be, truly making you feel like you’re in the middle of the action.

The Spectrum X6 Bluetooth is the active floor-standing model in the Spectrum Series of speakers, which with its powerful 200W stereo built-in amplifier and multiple wired and wireless inputs, can play from a multitude of audio sources. This combination of versatility and latest technology creates the ultimate high quality audio system for any audio video installation in the home.Scandinavian design at its bestThe new Tangent Spectrum speaker series includes both passive and active speakers with a unique Danish design. All models are available in stylish cabinet enclosures in either midnight black or polar white, highly durable matt satin finishes with protective colour matched, integrated mesh grilles.  Contrasting walnut base plinths complete the aesthetic appeal across the range. Danish audio engineeringWith carefully developed and bespoke twin 130mm bass/mid drivers and 25mm tweeters housed in the handsome bass reflex cabinets, the new Tangent Spectrum X6 Bluetooth allows you to enjoy music and movies with the level of performance reserved only for floor standing speakers of this type. Automatic On / OffAn ingenious feature of the new Spectrum X6 Bluetooth speaker is the so-called "wake-on" signal on both Bluetooth and AUX inputs.  This feature allows the speaker to turn on or off when the source turns on or off.  It will then also enter standby mode after 20 minutes without a signal.  So if you’re playing your music via Bluetooth, the speaker will turn off when you stop playing music after 20 minutes.  It will then automatically turn on when the same music source starts playing again. Similarly, you can allow the speaker to turn on and off via the AUX input source (mini jack). Note that this function is limited to the last source that the speaker has played. TV speaker - operate the audio with your TV's remote controlIf your TV has a variable audio output that can be connected via an AUX cable (mini jack), you can use the Tangent Spectrum X6 Bluetooth speakers to improve the sound from your TV for your movie experience. This means you can control the volume of the speakers using your TV remote control.Remote Control for ease of operationA neat and convenient remote control is supplied with Tangent’s new Spectrum X6 Bluetooth speakers, making them easy to switch between sources, adjust volume and pair the speakers with different Bluetooth compatible devices.   Προδιαγραφές:Bluetooth 4.2 aptX"Wake on" AUX & Bluetooth2 x Digital input2 x Analogue inputPhono input (til turntables)Sub out​Χαρακτηριστικά:Input: Bluetooth, 3.5 mm AUX (Mini Jack), Analog RCA, Phono input, Optical Digital In, Coaxial inOutput: Subwoofer Out, Speaker terminals (stereo)Speaker Units: 2 x 5" midrange and bass / 1" tweeterSystem: 3-waysSensitivity: 90 dBFrequency: 50 Hz - 20 000 kHzRemote Control: YesPower: 2 x 60W Class DStandby:

    Η τιμή δεν περιλαμβάνει το subwoofer.Το Grimm Audio LS1 είναι το πιο Τεχνολογικά Προηγμένο Σύστημα Ηχείων στον Κόσμο.  H νέα έκδοση με tweeter βιρυλλίου και ακόμα ποιό εξελιγμένα  ηλεκτρονικά μετατρέπει ένα ήδη εξαιρετικό ηχείο σε μια πρωτόγνωρη εμπειρία ακρόασης ! Αρκεί κάποιος να ακούσει μια καλογραμμένη ορχήστρα στα LS1, για να καταλάβει πόσο κοντά στην αληθινή μουσική μπορούμε να φτάσουμε, συνδιάζοντας την γνώση και το μεράκι, με την αιχμή της τεχνολογίας.Ένα πραγματικά καλό ηχείο monitor θα όφειλε να συνδυάζει την υψηλή ακρίβεια με την απαράμιλλη μουσικότητα. Δυστυχώς όμως δεν υπάρχουν πολλά πραγματικά καλά monitor ηχεία  γι'αυτό και υπάρχει η άποψη, πως μπορείς να έχεις τη μία από τις δύο παραπάνω αρετές , αλλά ποτέ και τις δύο μαζί. Το Grimm LS1 είναι το πρώτο ηχείο  που αποδεικνύει ότι η  απαράμιλλη μουσικότητα συμβαδίζει με την απόλυτη ακρίβεια.Ενσωματώνοντας κορυφαίας ποιότητας DSP, μετατροπείς (D/A και A/D) και ενισχυτικές μονάδες σε ένα από τα «πόδια» του ηχείου, η Grimm Audio κατάφερε να «παντρέψει» με ιδανικό τρόπο τεχνολογίες που ποτέ πριν δεν είχαν χρησιμοποιηθεί με τέτοια στρατηγική ακρίβεια. Συνεπώς, το LS1 δεν είναι απλά «ένα ηχείο», αλλά ένα πλήρες ηχητικό σύστημα που απλά χρειάζεται μια ψηφιακή ή αναλογική πηγή για να σας μεταφέρει εκεί ακριβώς που ο μηχανικός ήχου είχε στο μυαλό του αλλά και να απολάυσετε μουσική στο σαλόνι σας όπως κανένα ηχείο δεν κατάφερε έως τώρα.«Το Grimm LS1 είναι ένα ηχείο γι’ αυτούς που αναζητούν την πιο ουδέτερη και διάφανη ηχητική αναπαραγωγή. Κανένας συμβιβασμός δεν έγινε κατά την ανάπτυξή του.»Η επίτευξη πραγματικής ακρίβειας έγκειται στο να μπορείς να αποδώσεις κάθε επιμέρους στοιχείο μιας ηχογράφησης χωρίς ούτε να χάνεις αλλά και ούτε να προσθέτεις το παραμικρό. Το LS1 μπορεί να αναπαραγάγει κάθε ηχογραφημένο γεγονός με όλη του την ομορφιά ανέπαφη, ενώ ταυτόχρονα απεικονίζει κάθε ατέλεια στην πραγματική της διάσταση δίνοντάς σας όλες τις αναγκαίες πληροφορίες ώστε να επιτύχετε γρήγορα και εύκολα το ζητούμενο. Είναι αυτές ακριβώς οι ιδιότητες που καθιστούν το LS1 εκτός από ένα εξαιρετικό ηχείο Hi-Fi, ένα ιδανικό monitor τόσο για mixing όσο και για mastering.Μη σας ξεγελά το μοντέρνο “industrial” look του LS1· το σχήμα του ηχείου προέκυψε ως αποτέλεσμα εκτεταμένων ακουστικών και ψυχοακουστικών μελετών. Το μικρό σε όγκο (μόλις 14 λίτρα) κλειστό κουτί, είναι, σε αντίθεση με τη συντριπτική πλειοψηφία των ηχείων, πολύ πιο πλατύ απ’ ότι βαθύ, ώστε να λειτουργεί σαν οιωνεί άπειρη μπάφλα σχεδόν μέχρι τα 250 Hz. Μ’ αυτόν τον τρόπο, το ηχείο πάνω από τα 250 Hz ακτινοβολεί με αρκετά σταθερή κατευθυντικότητα στον ημιχώρο 2π («στενεύοντας» φυσιολογικά και προοδευτικά την off-axis απόκρισή του στις υψηλές συχνότητες) ελαττώνοντας πολλές από τις αρνητικές επιδράσεις του χώρου ακρόασης (η Ψυχοακουστική μας λέει ότι κάτω από περίπου τα 300 Hz το ανθρώπινο ακουστικό αισθητήριο δε μπορεί να διακρίνει ξεκάθαρα τον απευθείας ήχο από τις πρώτες ανακλάσεις ή το πεδίο αντηχήσεων), ενώ κάτω από τα 250 Hz η ακτινοβολία του μετατρέπεται ομαλά σε παντοκατευθυντική.«Η πολύ φαρδιά μπάφλα ‘’κόβει στο μισό’’ το χώρο στον οποίο ακτινοβολεί το ηχείο, υποδιπλασιάζοντας μ’ αυτόν τον τρόπο και τα προβλήματα προσαρμογής του στο δωμάτιο. Οι ημικυλινδρικές πλευρές περιορίζουν την περίθλαση, εκμηδενίζοντας μ’ αυτόν τον τρόπο την κλασσική ‘’κουτίλα’’.»Η καμπίνα του LS1 αναρτάται από δύο ημικυλίνδρους που περιορίζουν την περίθλαση και λειτουργούν ως μια ακλόνητη βάση. Η ευφυής χρήση DSP «δένει» απόλυτα το 8 ιντσών wooferμε κώνο από μαγνήσιο και το 1 ίντσας tweeter θόλου, ενώ εξασφαλίζει γραμμική απόκριση συχνότητας και επιτρέπει ελεγχόμενη απόδοση στα μπάσα μέχρι τα 35 Hz. Στο ένα από τα δύο πόδια ενός Grimm LS1 βρίσκεται ένας 48/76-bit Ψηφιακός Επεξεργαστής Σήματος (Digital Signal Processor – DSP), ψηφιακές είσοδοι/έξοδοι, μετατροπείς AD/DA, το ίδιο κύκλωμα clocking με το ομόσταυλο CC1 master clock, καθώς και δύο 180W κορυφαίοι ενισχυτές Class D Hypex NCore. Η σύλληψη του LS1 αντλεί τα μέγιστα δυνατά οφέλη από την έξυπνη χρήση της τεχνολογίας DSP. Το βασισμένο σε IIR (Infinite Impulse Response) φίλτρα crossover του ηχείου υλοποιεί ένα 4ης τάξης δικτύωμα διαχωρισμού Linkwitz-Riley με κλίσεις 24 dB/οκτάβα ανά δρόμο στα 1550 Hz, ενώ, στη συνέχεια, η διόρθωση της φάσης επιτυγχάνεται με τη χρήση ενός ιδεατού αντίστροφου ολοπερατού φίλτρου.Το αποτέλεσμα είναι μια γραμμική απόκριση φάσης χωρίς όμως τα pre-echo’s που ευθύνονται για την κακώς εννοούμενη «ψηφιακίλα» στην ηχητική υπογραφή των ηχείων που χρησιμοποιούν κοινά FIR (Finite Impulse Response) φίλτρα είτε για να υλοποιήσουν το crossoverτους στο ψηφιακό πεδίο, είτε απλά για να «αντιστρέψουν τα κακώς κείμενα» της κρουστικής τους απόκρισης.«Το tweeterμε κυματοδηγό (waveguide), το woofer που επιδεικνύει απόλυτα πιστονική συμπεριφορά σε όλο το φάσμα λειτουργίας του (και τα δύο προέρχονται από τη φημισμένη Νορβηγική SEAS), και η πολύ χαμηλή συχνότητα cross, εγγυώνται την ευρύτατη και εντυπωσιακά ομαλή διασπορά του ηχείου. Ο προσεγμένος  ακουστικός σχεδιασμός και η σωστή και ευφυής χρήση DSP, επιτυγχάνουν το απόλυτο δέσιμο των μεγαφώνων και οδηγούν στην πιο ομοιογενή συχνοτική απόδοση και την ταχύτερη κρουστική απόκριση που έχετε ακούσει στη ζωή σας.»Το Grimm LS1 είναι επίσης ένα πολύ πρακτικό και εύκολο στη συμβίωση ηχείο. Οι ψηφιακές του είσοδοι του επιτρέπουν να συνδέεται απευθείας με network playersσαν το Squeezebox ή το  Sonos, ή σε ένα Mac ή PC χρησιμοποιώντας τον ομόσταυλο USB converter.Συμβουλευτείτε τις παρεχόμενες φωτογραφίες για να δείτε μερικές επιλογές σύνδεσης.Παρά το συμπαγές τους μέγεθος, τα Grimm Audio LS1 προορίζονται ξεκάθαρα για χρήση ως main monitors σε mastering studios και mixing rooms όπου υπάρχει δυνατότητα να τοποθετηθούν ηχεία δαπέδου. Oι ελεγχόμενες μέσω DSP αναλογικές έξοδοι για sub επιτρέπουν την εύκολη και απρόσκοπτη ενσωμάτωση δύο subwoofers, γι’ αυτούς που χρειάζονται υψηλά SPL κάτω από τα 40 Hz. Προφανώς, η επιλογή των ομόσταυλων LS1s subwoofers, εγγυάται το ιδανικό ταίριασμά τους με το κυρίως σύστημα των LS1, το οποίο μετατρέπεται σε ένα ολοκληρωμένο και τέλεια «δεμένο» σύστημα 3 δρόμων.Περισσότερες πληροφορίες μπορούν να βρεθούν στις σελίδες των LS1 remote και LS1s subwoofers.Χαρακτηριστικά:Ακτινοβολία στον ημιχώρο 2π με κάτω όριο τα 250 HzΑπόκριση συχνότητας ελεγχόμενη μέσω DSPΟμαλότατη off-axis συμπεριφοράΑναλογική και Ψηφιακές είσοδοιΑναλογική έξοδοςSub ήδη φιλτραρισμένηΑσφαλής λειτουργία χάρη στην ενσωματωμένη θερμική προστασία και τον έλεγχο της μέγιστης διαδρομής των μεγαφώνωνΡύθμιση παραμέτρων και volume control μέσω midiΕνεργή οδήγηση με τους υπερ-χαμηλής παραμόρφωσης class D ενισχυτές Hypex NCoreΥψηλής ποιότητας μεγάφωνα SeasΔυνατότητα τηλεχειρισμούΔυνατότητα επιλογής φινιρίσματοςΠροδιαγραφές:Απόκριση Συχνότητας: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Το κάτω σημείο αποκοπής είναι ρυθμιζόμενο από το χρήστη μεταξύ 35 Hz και 100 Hz, με Q=0.7 ή 0.5)Με την προσθήκη των LS1s Subwoofers, το LS1 μπορεί να κατέβει σχεδόν μέχρι την περιοχή των υποήχων.Απόκλιση από την Ελάχιστη Φάση (Deviation from minimum phase) +/-2°Ισχύς Ενισχυτών: 2x180WMax SPL: 109dB/1mSNR: 114dB (unweighted)Crossover : 1.55 kHz Linkwitz-Riley 4ης τάξης, φασικά διορθωμένο ώστε να προκύπτει σύστημα Ελάχιστης Φάσης.Latency: 2msΕσωτερικός Όγκος: 14 ΛίτραΎψος: 1150mm, 1450mm – κατόπιν παραγγελίας.Πλάτος Χ Βάθος: 520mm Χ 160mmΕπιπλέον στοιχεία (στα Αγγλικά):·         Download the LS1 PC remote software    

    Το Grimm Audio LS1 είναι το πιο Τεχνολογικά Προηγμένο Σύστημα Ηχείων στον Κόσμο.  H νέα έκδοση LS1a είναι το ποιό προσιτό LS1 και η μόνη διαφορά απο το LS1s είναι η χρήση woofer αλουμινίου αντί για woofer απο μαγνήσιο.Αρκεί κάποιος να ακούσει μια καλογραμμένη ορχήστρα στα LS1, για να καταλάβει πόσο κοντά στην αληθινή μουσική μπορούμε να φτάσουμε, συνδιάζοντας την γνώση και το μεράκι, με την αιχμή της τεχνολογίας.Ένα πραγματικά καλό ηχείο monitor θα όφειλε να συνδυάζει την υψηλή ακρίβεια με την απαράμιλλη μουσικότητα. Δυστυχώς όμως δεν υπάρχουν πολλά πραγματικά καλά monitor ηχεία  γι'αυτό και υπάρχει η άποψη, πως μπορείς να έχεις τη μία από τις δύο παραπάνω αρετές , αλλά ποτέ και τις δύο μαζί. Το Grimm LS1 είναι το πρώτο ηχείο  που αποδεικνύει ότι η  απαράμιλλη μουσικότητα συμβαδίζει με την απόλυτη ακρίβεια.Ενσωματώνοντας κορυφαίας ποιότητας DSP, μετατροπείς (D/A και A/D) και ενισχυτικές μονάδες σε ένα από τα «πόδια» του ηχείου, η Grimm Audio κατάφερε να «παντρέψει» με ιδανικό τρόπο τεχνολογίες που ποτέ πριν δεν είχαν χρησιμοποιηθεί με τέτοια στρατηγική ακρίβεια. Συνεπώς, το LS1 δεν είναι απλά «ένα ηχείο», αλλά ένα πλήρες ηχητικό σύστημα που απλά χρειάζεται μια ψηφιακή ή αναλογική πηγή για να σας μεταφέρει εκεί ακριβώς που ο μηχανικός ήχου είχε στο μυαλό του αλλά και να απολάυσετε μουσική στο σαλόνι σας όπως κανένα ηχείο δεν κατάφερε έως τώρα.«Το Grimm LS1 είναι ένα ηχείο γι’ αυτούς που αναζητούν την πιο ουδέτερη και διάφανη ηχητική αναπαραγωγή. Κανένας συμβιβασμός δεν έγινε κατά την ανάπτυξή του.»Η επίτευξη πραγματικής ακρίβειας έγκειται στο να μπορείς να αποδώσεις κάθε επιμέρους στοιχείο μιας ηχογράφησης χωρίς ούτε να χάνεις αλλά και ούτε να προσθέτεις το παραμικρό. Το LS1 μπορεί να αναπαραγάγει κάθε ηχογραφημένο γεγονός με όλη του την ομορφιά ανέπαφη, ενώ ταυτόχρονα απεικονίζει κάθε ατέλεια στην πραγματική της διάσταση δίνοντάς σας όλες τις αναγκαίες πληροφορίες ώστε να επιτύχετε γρήγορα και εύκολα το ζητούμενο. Είναι αυτές ακριβώς οι ιδιότητες που καθιστούν το LS1 εκτός από ένα εξαιρετικό ηχείο Hi-Fi, ένα ιδανικό monitor τόσο για mixing όσο και για mastering.Μη σας ξεγελά το μοντέρνο “industrial” look του LS1· το σχήμα του ηχείου προέκυψε ως αποτέλεσμα εκτεταμένων ακουστικών και ψυχοακουστικών μελετών. Το μικρό σε όγκο (μόλις 14 λίτρα) κλειστό κουτί, είναι, σε αντίθεση με τη συντριπτική πλειοψηφία των ηχείων, πολύ πιο πλατύ απ’ ότι βαθύ, ώστε να λειτουργεί σαν οιωνεί άπειρη μπάφλα σχεδόν μέχρι τα 250 Hz. Μ’ αυτόν τον τρόπο, το ηχείο πάνω από τα 250 Hz ακτινοβολεί με αρκετά σταθερή κατευθυντικότητα στον ημιχώρο 2π («στενεύοντας» φυσιολογικά και προοδευτικά την off-axis απόκρισή του στις υψηλές συχνότητες) ελαττώνοντας πολλές από τις αρνητικές επιδράσεις του χώρου ακρόασης (η Ψυχοακουστική μας λέει ότι κάτω από περίπου τα 300 Hz το ανθρώπινο ακουστικό αισθητήριο δε μπορεί να διακρίνει ξεκάθαρα τον απευθείας ήχο από τις πρώτες ανακλάσεις ή το πεδίο αντηχήσεων), ενώ κάτω από τα 250 Hz η ακτινοβολία του μετατρέπεται ομαλά σε παντοκατευθυντική.«Η πολύ φαρδιά μπάφλα ‘’κόβει στο μισό’’ το χώρο στον οποίο ακτινοβολεί το ηχείο, υποδιπλασιάζοντας μ’ αυτόν τον τρόπο και τα προβλήματα προσαρμογής του στο δωμάτιο. Οι ημικυλινδρικές πλευρές περιορίζουν την περίθλαση, εκμηδενίζοντας μ’ αυτόν τον τρόπο την κλασσική ‘’κουτίλα’’.»Η καμπίνα του LS1 αναρτάται από δύο ημικυλίνδρους που περιορίζουν την περίθλαση και λειτουργούν ως μια ακλόνητη βάση. Η ευφυής χρήση DSP «δένει» απόλυτα το 8 ιντσών wooferμε κώνο από μαγνήσιο και το 1 ίντσας tweeter θόλου, ενώ εξασφαλίζει γραμμική απόκριση συχνότητας και επιτρέπει ελεγχόμενη απόδοση στα μπάσα μέχρι τα 35 Hz. Στο ένα από τα δύο πόδια ενός Grimm LS1 βρίσκεται ένας 48/76-bit Ψηφιακός Επεξεργαστής Σήματος (Digital Signal Processor – DSP), ψηφιακές είσοδοι/έξοδοι, μετατροπείς AD/DA, το ίδιο κύκλωμα clocking με το ομόσταυλο CC1 master clock, καθώς και δύο 180W κορυφαίοι ενισχυτές Class D Hypex NCore. Η σύλληψη του LS1 αντλεί τα μέγιστα δυνατά οφέλη από την έξυπνη χρήση της τεχνολογίας DSP. Το βασισμένο σε IIR (Infinite Impulse Response) φίλτρα crossover του ηχείου υλοποιεί ένα 4ης τάξης δικτύωμα διαχωρισμού Linkwitz-Riley με κλίσεις 24 dB/οκτάβα ανά δρόμο στα 1550 Hz, ενώ, στη συνέχεια, η διόρθωση της φάσης επιτυγχάνεται με τη χρήση ενός ιδεατού αντίστροφου ολοπερατού φίλτρου.Το αποτέλεσμα είναι μια γραμμική απόκριση φάσης χωρίς όμως τα pre-echo’s που ευθύνονται για την κακώς εννοούμενη «ψηφιακίλα» στην ηχητική υπογραφή των ηχείων που χρησιμοποιούν κοινά FIR (Finite Impulse Response) φίλτρα είτε για να υλοποιήσουν το crossoverτους στο ψηφιακό πεδίο, είτε απλά για να «αντιστρέψουν τα κακώς κείμενα» της κρουστικής τους απόκρισης.«Το tweeterμε κυματοδηγό (waveguide), το woofer που επιδεικνύει απόλυτα πιστονική συμπεριφορά σε όλο το φάσμα λειτουργίας του (και τα δύο προέρχονται από τη φημισμένη Νορβηγική SEAS), και η πολύ χαμηλή συχνότητα cross, εγγυώνται την ευρύτατη και εντυπωσιακά ομαλή διασπορά του ηχείου. Ο προσεγμένος  ακουστικός σχεδιασμός και η σωστή και ευφυής χρήση DSP, επιτυγχάνουν το απόλυτο δέσιμο των μεγαφώνων και οδηγούν στην πιο ομοιογενή συχνοτική απόδοση και την ταχύτερη κρουστική απόκριση που έχετε ακούσει στη ζωή σας.»Το Grimm LS1 είναι επίσης ένα πολύ πρακτικό και εύκολο στη συμβίωση ηχείο. Οι ψηφιακές του είσοδοι του επιτρέπουν να συνδέεται απευθείας με network playersσαν το Squeezebox ή το  Sonos, ή σε ένα Mac ή PC χρησιμοποιώντας τον ομόσταυλο USB converter.Συμβουλευτείτε τις παρεχόμενες φωτογραφίες για να δείτε μερικές επιλογές σύνδεσης.Παρά το συμπαγές τους μέγεθος, τα Grimm Audio LS1 προορίζονται ξεκάθαρα για χρήση ως main monitors σε mastering studios και mixing rooms όπου υπάρχει δυνατότητα να τοποθετηθούν ηχεία δαπέδου. Oι ελεγχόμενες μέσω DSP αναλογικές έξοδοι για sub επιτρέπουν την εύκολη και απρόσκοπτη ενσωμάτωση δύο subwoofers, γι’ αυτούς που χρειάζονται υψηλά SPL κάτω από τα 40 Hz. Προφανώς, η επιλογή των ομόσταυλων LS1s subwoofers, εγγυάται το ιδανικό ταίριασμά τους με το κυρίως σύστημα των LS1, το οποίο μετατρέπεται σε ένα ολοκληρωμένο και τέλεια «δεμένο» σύστημα 3 δρόμων.Περισσότερες πληροφορίες μπορούν να βρεθούν στις σελίδες των LS1 remote και LS1s subwoofers.Χαρακτηριστικά:Ακτινοβολία στον ημιχώρο 2π με κάτω όριο τα 250 HzΑπόκριση συχνότητας ελεγχόμενη μέσω DSPΟμαλότατη off-axis συμπεριφοράΑναλογική και Ψηφιακές είσοδοιΑναλογική έξοδοςSub ήδη φιλτραρισμένηΑσφαλής λειτουργία χάρη στην ενσωματωμένη θερμική προστασία και τον έλεγχο της μέγιστης διαδρομής των μεγαφώνωνΡύθμιση παραμέτρων και volume control μέσω midiΕνεργή οδήγηση με τους υπερ-χαμηλής παραμόρφωσης class D ενισχυτές Hypex NCoreΥψηλής ποιότητας μεγάφωνα SeasΔυνατότητα τηλεχειρισμούΔυνατότητα επιλογής φινιρίσματοςΠροδιαγραφές:Απόκριση Συχνότητας: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Το κάτω σημείο αποκοπής είναι ρυθμιζόμενο από το χρήστη μεταξύ 35 Hz και 100 Hz, με Q=0.7 ή 0.5)Με την προσθήκη των LS1s Subwoofers, το LS1 μπορεί να κατέβει σχεδόν μέχρι την περιοχή των υποήχων.Απόκλιση από την Ελάχιστη Φάση (Deviation from minimum phase) +/-2°Ισχύς Ενισχυτών: 2x180WMax SPL: 109dB/1mSNR: 114dB (unweighted)Crossover : 1.55 kHz Linkwitz-Riley 4ης τάξης, φασικά διορθωμένο ώστε να προκύπτει σύστημα Ελάχιστης Φάσης.Latency: 2msΕσωτερικός Όγκος: 14 ΛίτραΎψος: 1150mm, 1450mm – κατόπιν παραγγελίας.Πλάτος Χ Βάθος: 520mm Χ 160mmΕπιπλέον στοιχεία (στα Αγγλικά):·         Download the LS1 PC remote software    

    Το Grimm Audio LS1 είναι το πιο Τεχνολογικά Προηγμένο Σύστημα Ηχείων στον Κόσμο!Αρκεί κάποιος να ακούσει μια καλογραμμένη ορχήστρα στα LS1, για να καταλάβει πόσο κοντά στην αληθινή μουσική μπορούμε να φτάσουμε, συνδυάζοντας την γνώση και το μεράκι, με την αιχμή της τεχνολογίας.Ένα πραγματικά καλό ηχείο monitor θα όφειλε να συνδυάζει την υψηλή ακρίβεια με την απαράμιλλη μουσικότητα. Δυστυχώς όμως δεν υπάρχουν πολλά πραγματικά καλά monitor ηχεία γι'αυτό και υπάρχει η άποψη, πως μπορείς να έχεις τη μία από τις δύο παραπάνω αρετές , αλλά ποτέ και τις δύο μαζί. Το Grimm LS1 είναι το πρώτο ηχείο που αποδεικνύει ότι η απαράμιλλη μουσικότητα συμβαδίζει με την απόλυτη ακρίβεια.Ενσωματώνοντας κορυφαίας ποιότητας DSP, μετατροπείς (D/A και A/D) και ενισχυτικές μονάδες σε ένα από τα «πόδια» του ηχείου, η Grimm Audio κατάφερε να «παντρέψει» με ιδανικό τρόπο τεχνολογίες που ποτέ πριν δεν είχαν χρησιμοποιηθεί με τέτοια στρατηγική ακρίβεια. Συνεπώς, το LS1 δεν είναι απλά «ένα ηχείο», αλλά ένα πλήρες ηχητικό σύστημα που απλά χρειάζεται μια ψηφιακή ή αναλογική πηγή για να σας μεταφέρει εκεί ακριβώς που ο μηχανικός ήχου είχε στο μυαλό του αλλά και να απολάυσετε μουσική στο σαλόνι σας όπως κανένα ηχείο δεν κατάφερε έως τώρα.«Το Grimm LS1 είναι ένα ηχείο γι’ αυτούς που αναζητούν την πιο ουδέτερη και διάφανη ηχητική αναπαραγωγή. Κανένας συμβιβασμός δεν έγινε κατά την ανάπτυξή του.»Η επίτευξη πραγματικής ακρίβειας έγκειται στο να μπορείς να αποδώσεις κάθε επιμέρους στοιχείο μιας ηχογράφησης χωρίς ούτε να χάνεις αλλά και ούτε να προσθέτεις το παραμικρό. Το LS1 μπορεί να αναπαραγάγει κάθε ηχογραφημένο γεγονός με όλη του την ομορφιά ανέπαφη, ενώ ταυτόχρονα απεικονίζει κάθε ατέλεια στην πραγματική της διάσταση δίνοντάς σας όλες τις αναγκαίες πληροφορίες ώστε να επιτύχετε γρήγορα και εύκολα το ζητούμενο. Είναι αυτές ακριβώς οι ιδιότητες που καθιστούν το LS1 εκτός από ένα εξαιρετικό ηχείο Hi-Fi, ένα ιδανικό monitor τόσο για mixing όσο και για mastering.Μη σας ξεγελά το μοντέρνο “industrial” look του LS1· το σχήμα του ηχείου προέκυψε ως αποτέλεσμα εκτεταμένων ακουστικών και ψυχοακουστικών μελετών. Το μικρό σε όγκο (μόλις 14 λίτρα) κλειστό κουτί, είναι, σε αντίθεση με τη συντριπτική πλειοψηφία των ηχείων, πολύ πιο πλατύ απ’ ότι βαθύ, ώστε να λειτουργεί σαν οιωνεί άπειρη μπάφλα σχεδόν μέχρι τα 250 Hz. Μ’ αυτόν τον τρόπο, το ηχείο πάνω από τα 250 Hz ακτινοβολεί με αρκετά σταθερή κατευθυντικότητα στον ημιχώρο 2π («στενεύοντας» φυσιολογικά και προοδευτικά την off-axis απόκρισή του στις υψηλές συχνότητες) ελαττώνοντας πολλές από τις αρνητικές επιδράσεις του χώρου ακρόασης (η Ψυχοακουστική μας λέει ότι κάτω από περίπου τα 300 Hz το ανθρώπινο ακουστικό αισθητήριο δε μπορεί να διακρίνει ξεκάθαρα τον απευθείας ήχο από τις πρώτες ανακλάσεις ή το πεδίο αντηχήσεων), ενώ κάτω από τα 250 Hz η ακτινοβολία του μετατρέπεται ομαλά σε παντοκατευθυντική.«Η πολύ φαρδιά μπάφλα ‘’κόβει στο μισό’’ το χώρο στον οποίο ακτινοβολεί το ηχείο, υποδιπλασιάζοντας μ’ αυτόν τον τρόπο και τα προβλήματα προσαρμογής του στο δωμάτιο. Οι ημικυλινδρικές πλευρές περιορίζουν την περίθλαση, εκμηδενίζοντας μ’ αυτόν τον τρόπο την κλασσική ‘’κουτίλα’’.»Η καμπίνα του LS1 αναρτάται από δύο ημικυλίνδρους που περιορίζουν την περίθλαση και λειτουργούν ως μια ακλόνητη βάση. Η ευφυής χρήση DSP «δένει» απόλυτα το 8 ιντσών wooferμε κώνο από μαγνήσιο και το 1 ίντσας tweeter θόλου, ενώ εξασφαλίζει γραμμική απόκριση συχνότητας και επιτρέπει ελεγχόμενη απόδοση στα μπάσα μέχρι τα 35 Hz. Στο ένα από τα δύο πόδια ενός Grimm LS1 βρίσκεται ένας 48/76-bit Ψηφιακός Επεξεργαστής Σήματος (Digital Signal Processor – DSP), ψηφιακές είσοδοι/έξοδοι, μετατροπείς AD/DA, το ίδιο κύκλωμα clocking με το ομόσταυλο CC1 master clock, καθώς και δύο 180W κορυφαίοι ενισχυτές Class D Hypex NCore. Η σύλληψη του LS1 αντλεί τα μέγιστα δυνατά οφέλη από την έξυπνη χρήση της τεχνολογίας DSP. Το βασισμένο σε IIR (Infinite Impulse Response) φίλτρα crossover του ηχείου υλοποιεί ένα 4ης τάξης δικτύωμα διαχωρισμού Linkwitz-Riley με κλίσεις 24 dB/οκτάβα ανά δρόμο στα 1550 Hz, ενώ, στη συνέχεια, η διόρθωση της φάσης επιτυγχάνεται με τη χρήση ενός ιδεατού αντίστροφου ολοπερατού φίλτρου.Το αποτέλεσμα είναι μια γραμμική απόκριση φάσης χωρίς όμως τα pre-echo’s που ευθύνονται για την κακώς εννοούμενη «ψηφιακίλα» στην ηχητική υπογραφή των ηχείων που χρησιμοποιούν κοινά FIR (Finite Impulse Response) φίλτρα είτε για να υλοποιήσουν το crossoverτους στο ψηφιακό πεδίο, είτε απλά για να «αντιστρέψουν τα κακώς κείμενα» της κρουστικής τους απόκρισης.«Το tweeterμε κυματοδηγό (waveguide), το woofer που επιδεικνύει απόλυτα πιστονική συμπεριφορά σε όλο το φάσμα λειτουργίας του (και τα δύο προέρχονται από τη φημισμένη Νορβηγική SEAS), και η πολύ χαμηλή συχνότητα cross, εγγυώνται την ευρύτατη και εντυπωσιακά ομαλή διασπορά του ηχείου. Ο προσεγμένος ακουστικός σχεδιασμός και η σωστή και ευφυής χρήση DSP, επιτυγχάνουν το απόλυτο δέσιμο των μεγαφώνων και οδηγούν στην πιο ομοιογενή συχνοτική απόδοση και την ταχύτερη κρουστική απόκριση που έχετε ακούσει στη ζωή σας.»Το Grimm LS1 είναι επίσης ένα πολύ πρακτικό και εύκολο στη συμβίωση ηχείο. Οι ψηφιακές του είσοδοι του επιτρέπουν να συνδέεται απευθείας με network playersσαν το Squeezebox ή το Sonos, ή σε ένα Mac ή PC χρησιμοποιώντας τον ομόσταυλο USB converter.Συμβουλευτείτε τις παρεχόμενες φωτογραφίες για να δείτε μερικές επιλογές σύνδεσης.Παρά το συμπαγές τους μέγεθος, τα Grimm Audio LS1 προορίζονται ξεκάθαρα για χρήση ως main monitors σε mastering studios και mixing rooms όπου υπάρχει δυνατότητα να τοποθετηθούν ηχεία δαπέδου. Oι ελεγχόμενες μέσω DSP αναλογικές έξοδοι για sub επιτρέπουν την εύκολη και απρόσκοπτη ενσωμάτωση δύο subwoofers, γι’ αυτούς που χρειάζονται υψηλά SPL κάτω από τα 40 Hz. Προφανώς, η επιλογή των ομόσταυλων LS1s subwoofers, εγγυάται το ιδανικό ταίριασμά τους με το κυρίως σύστημα των LS1, το οποίο μετατρέπεται σε ένα ολοκληρωμένο και τέλεια «δεμένο» σύστημα 3 δρόμων.Περισσότερες πληροφορίες μπορούν να βρεθούν στις σελίδες των LS1 remote και LS1s subwoofers.Χαρακτηριστικά:Ακτινοβολία στον ημιχώρο 2π με κάτω όριο τα 250 HzΑπόκριση συχνότητας ελεγχόμενη μέσω DSPΟμαλότατη off-axis συμπεριφοράΑναλογική και Ψηφιακές είσοδοιΑναλογική έξοδοςSub ήδη φιλτραρισμένηΑσφαλής λειτουργία χάρη στην ενσωματωμένη θερμική προστασία και τον έλεγχο της μέγιστης διαδρομής των μεγαφώνωνΡύθμιση παραμέτρων και volume control μέσω midiΕνεργή οδήγηση με τους υπερ-χαμηλής παραμόρφωσης class D ενισχυτές Hypex NCoreΥψηλής ποιότητας μεγάφωνα SeasΔυνατότητα τηλεχειρισμούΔυνατότητα επιλογής φινιρίσματοςΠροδιαγραφές:Απόκριση Συχνότητας: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Το κάτω σημείο αποκοπής είναι ρυθμιζόμενο από το χρήστη μεταξύ 35 Hz και 100 Hz, με Q=0.7 ή 0.5)Με την προσθήκη των LS1s Subwoofers, το LS1 μπορεί να κατέβει σχεδόν μέχρι την περιοχή των υποήχων.Απόκλιση από την Ελάχιστη Φάση (Deviation from minimum phase) +/-2°Ισχύς Ενισχυτών: 2x180WMax SPL: 109dB/1mSNR: 114dB (unweighted)Crossover : 1.55 kHz Linkwitz-Riley 4ης τάξης, φασικά διορθωμένο ώστε να προκύπτει σύστημα Ελάχιστης Φάσης.Latency: 2msΕσωτερικός Όγκος: 14 ΛίτραΎψος: 1150mm, 1450mm – κατόπιν παραγγελίας.Πλάτος Χ Βάθος: 520mm Χ 160mmΕπιπλέον στοιχεία (στα Αγγλικά):·        Download the LS1 PC remote software    

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm. The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm. The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room. The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room. The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room. The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear. Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear. Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0