Ηχεία Ενεργά

ART 710-A MK5 is a unique product in its category. The 1.75" compression driver offers unique vocal clarity and sound projection. The 10” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections.Features129 dB Max SPL1400 WATT 2-way peak power90° x 70°, Wide dispersion constant directivity hornInnovative DSP Processing1,75" Compression Driver10" WooferFiRPHASE TechnologyXBOOST Low Frequencies Enhancer

SRT21010" 1600W Professional Powered LoudspeakerDesigned for bands and gigging DJs with real-world “throw and go” situations in mind, the Mackie SRT210 Professional Powered Loudspeaker combines our Advanced Impulse DSP acoustic tuning technology, an ultra-powerful 1600W Class-D amplifier, custom transducers, and Bluetooth streaming to create the ultimate workhorse loudspeaker. Pro Without the PricetagWith Mackie SRT210 10-inch powered speakers, you can be amplified and ready to rock within minutes. Time-saving features like the SRT Mix Control™ built-in 4-channel digital mixer with Bluetooth® and Advanced Impulse™ DSP tuning help you get your Mackie SRT210 Loudspeakers dialed in for clear, consistent sound at any venue. And with transparent system protection, your system will keep the party going all night . It all adds up to create a daily driver loudspeaker you can trust. SYM-X™ HORNThe custom horn within each loudspeaker was designed with the goal to bring out the very best from the HF transducer while maintaining the flattest response possible at the crossover point. Surprise surprise... we nailed it. The special design of this horn allows the compression driver to operate at near maximum efficiency. This means it gets louder and sounds better with less effort. The transition between the LF and HF is a symmetrical, flat response which is what helps make the incredibly smooth midrange possible.TRANSPARENT SYSTEM PROTECTIONOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.Product featuresThe ultimate workhorse loudspeakerIndustry-leading 1600W Class-D amplifier with transparent system limiting and protectionSuperior sound with Advanced Impulse™ DSP tuningCustom transducers and SymX™ Horn for unmatched clarity and accuracySRT Mix Control™ built-in 4-channel digital mixer with Bluetooth®Complete wireless control via the SRT Connect™ appWirelessly link 2 SRT speakers together for music streaming applications plus controlDual-angle pole mount plus angled design for use as a floor monitor

SRT21212" 1600W Professional Powered LoudspeakerDesigned with real-world “throw and go” situations in mind, Mackie SRT212 12-inch powered speakers bundle our Advanced Impulse DSP acoustic tuning technology with an ultra-powerful 1600W Class-D amplifier, custom transducers, and Bluetooth® streaming to create the ultimate workhorse loudspeaker.A LOUDSPEAKER UPGRADE THAT MAKES SENSEBe amplified to rock within minutes. The Mackie SRT212 12-inch powered speakers is loaded with time-saving features like the SRT Mix Control™ built-in 4-channel digital mixer with Bluetooth and Advanced Impulse™ DSP tuning to help you get up and running quickly with crystal clear sound. And with its transparent system protection, the amplifier won't give up when it matters most—because the show must go on. SYM-X™ HORNThe custom horn within each loudspeaker was designed with the goal to bring out the very best from the HF transducer while maintaining the flattest response possible at the crossover point. Surprise surprise... we nailed it. The special design of this horn allows the compression driver to operate at near maximum efficiency. This means it gets louder and sounds better with less effort. The transition between the LF and HF is a symmetrical, flat response which is what helps make the incredibly smooth midrange possible.TRANSPARENT SYSTEM PROTECTIONOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.Product featuresThe ultimate workhorse loudspeakerIndustry-leading 1600W Class-D amplifier with transparent system limiting and protectionSuperior sound with Advanced Impulse™ DSP tuningCustom transducers and SymX™ Horn for unmatched clarity and accuracySRT Mix Control™ built-in 4-channel digital mixer with Bluetooth®Complete wireless control via the SRT Connect™ appWirelessly link 2 SRT speakers together for music streaming applications plus controlDual-angle pole mount plus angled design for use as a floor monitor

SRT21515" 1600W Professional Powered LoudspeakerThe Mackie SRT215 Professional Powered Bluetooth Loudspeaker is built for bands, DJs, singer/songwriters and venues who need clear, powerful sound with minimal setup time. Full Throttle PerformanceSometimes soundcheck is the first song. Mackie SRT215 Professional Powered Loudspeakers help you dial in great sound in a hurry with time-saving features like the built-in SRT Mix Control™ 4-channel digital mixer with Bluetooth® and Advanced Impulse™ DSP tuning for consistent, accurate and reliable sound at every gig. Plus, its transparent system protection defends against power surges and loud pops—because everybody forgets a mute button now and then. SYM-X™ HORNThe custom horn within each loudspeaker was designed with the goal to bring out the very best from the HF transducer while maintaining the flattest response possible at the crossover point. Surprise surprise... we nailed it. The special design of this horn allows the compression driver to operate at near maximum efficiency. This means it gets louder and sounds better with less effort. The transition between the LF and HF is a symmetrical, flat response which is what helps make the incredibly smooth midrange possible.TRANSPARENT SYSTEM PROTECTIONOther loudspeakers feature some sort of protection and limiting to help them squeeze a dB or two out of the speaker. This is almost always at the expense of sound quality and is commonly experienced as diminished bass response and the "pumping" sound of the internal limiter having a bad day.When operating at very high levels (ears beware), the processor-controlled system monitoring analyzes the audio signal and identifies the problem areas, then dynamically applies multi-band compression to those specific frequencies rather than lowering the overall output. This keeps your levels where you want them and maintains the sound quality you expect.Product featuresThe ultimate workhorse loudspeakerIndustry-leading 1600W Class-D amplifier with transparent system limiting and protectionSuperior sound with Advanced Impulse™ DSP tuningCustom transducers and SymX™ Horn for unmatched clarity and accuracySRT Mix Control™ built-in 4-channel digital mixer with Bluetooth®Complete wireless control via the SRT Connect™ appWirelessly link 2 SRT speakers together for music streaming applications plus controlDual-angle pole mount plus angled design for use as a floor monitor

SRM210 V-Class10" 2000W High-Performance Powered LoudspeakerThe Mackie SRM210 V-Class 10-inch powered speaker delivers industry-leading sound, power, and reliability for mobile DJs and musicians who need uncompromising performance in an easily portable form factor. Don't Be Fooled By its Small SizeMore power. Studio level fidelity. Incredibly reliable. Smart features. SRM210 | V-Class combines our most reliable amplifier platform, premium transducers and a built-in mixer with the latest DSP technology to create the ultimate all-in-one premium loudspeaker for bands, DJs and venues. It may be ultra-portable, but there is a beast inside waiting to be unleashed. SYM-X™ HORNThe custom horn within each loudspeaker was designed with the goal to bring out the very best from the HF transducer while maintaining the flattest response possible at the crossover point. Surprise surprise... we nailed it. The special design of this horn allows the compression driver to operate at near maximum efficiency. This means it gets louder and sounds better with less effort. The transition between the LF and HF is a symmetrical, flat response which is what helps make the incredibly smooth midrange possible.WIRELESS CONTROL & STREAMINGWith the SRM Connect™ app available for iOS and Android® devices, you get complete control over everything and then some for up to 2 speakers simultaneously. Quickly access levels, EQ, meters, and configuration. Plus, you can save memory presets to streamline setup at your next gig.When you link to another SRM | V-Class speaker, you get control over the entire system in the app, all in one view. No additional pairing or swapping back and forth on your device is required.For an incredibly simple music playback system, you can stream music directly from any Bluetooth enabled device.Product featuresBest performance, sound quality, and reliability in its classIndustry-leading 2000W Class-D amplifier with transparent system limiting and protectionSuperior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracySRM Mix Control™ built-in 4-channel digital mixer with Bluetooth®Complete wireless control via the SRM Connect™ appWirelessly link 2 SRM | V-Class speakers together for music streaming applications plus controlDual-angle pole mount plus angled design for use as a floor monitor

SRM212 V-Class12" 2000W High-Performance Powered LoudspeakerThe SRM212 | V-Class High-Performance Powered Loudspeaker features robust transducers, cutting-edge DSP, and a rock-solid amplifier for unmatched clarity, output, and versatility. This is THE portable loudspeaker for DJs, bands, venues, and Houses of Worship that demand high output and uncompromising sound quality.Power and Sound quality that just doesn't quitMeet the next generation 12" SRM loudspeaker. Packed with more power, sound quality, and reliability than ever before. We combined our most rock-solid amplifier platform ever, premium transducers, and the best acoustic tuning in the industry – the result is a new level of performance that just begs to be pushed. From DJs to venues to rental, SRM212 | V-Class delivers the next level sound you need to stand out.SYM-X™ HORNThe custom horn within each loudspeaker was designed with the goal to bring out the very best from the HF transducer while maintaining the flattest response possible at the crossover point. Surprise surprise... we nailed it. The special design of this horn allows the compression driver to operate at near maximum efficiency. This means it gets louder and sounds better with less effort. The transition between the LF and HF is a symmetrical, flat response which is what helps make the incredibly smooth midrange possible.WIRELESS CONTROL & STREAMINGWith the SRM Connect™ app available for iOS and Android® devices, you get complete control over everything and then some for up to 2 speakers simultaneously. Quickly access levels, EQ, meters, and configuration. Plus, you can save memory presets to streamline setup at your next gig.When you link to another SRM | V-Class speaker, you get control over the entire system in the app, all in one view. No additional pairing or swapping back and forth on your device is required.For an incredibly simple music playback system, you can stream music directly from any Bluetooth enabled device.Product featuresBest performance, sound quality, and reliability in its classIndustry-leading 2000W Class-D amplifier with transparent system limiting and protectionSuperior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracySRM Mix Control™ built-in 4-channel digital mixer with Bluetooth®Complete wireless control via the SRM Connect™ appWirelessly link 2 SRM | V-Class speakers together for music streaming applications plus controlDual-angle pole mount plus angled design for use as a floor monitor

SRM215 V-Class15" 2000W High-Performance Powered LoudspeakerMackie SRM215 | V-Class 15-inch high-performance loudspeaker offers superior amplification and advanced DSP technology that performers and venues demand for professional live sound applications. BECOME LEGEND. Wield The Ultimate Loudspeaker.We built the SRM215 | V-Class with optimized power, improved sound quality and tour-ready reliability to give venues and performers a new class of all-in-one premium professional loudspeakers. Experience our superior amplifier platform, premium transducers, built-in 4-channel digital mixer, wireless control via our SRM Connect™app and cutting-edge acoustic tuning for next-level performance you’ll want to see (and hear) for yourselfSYM-X™ HORNThe custom horn within each loudspeaker was designed with the goal to bring out the very best from the HF transducer while maintaining the flattest response possible at the crossover point. Surprise surprise... we nailed it. The special design of this horn allows the compression driver to operate at near maximum efficiency. This means it gets louder and sounds better with less effort. The transition between the LF and HF is a symmetrical, flat response which is what helps make the incredibly smooth midrange possible.WIRELESS CONTROL & STREAMINGWith the SRM Connect™ app available for iOS and Android® devices, you get complete control over everything and then some for up to 2 speakers simultaneously. Quickly access levels, EQ, meters, and configuration. Plus, you can save memory presets to streamline setup at your next gig.When you link to another SRM | V-Class speaker, you get control over the entire system in the app, all in one view. No additional pairing or swapping back and forth on your device is required.For an incredibly simple music playback system, you can stream music directly from any Bluetooth enabled device.Product featuresBest performance, sound quality, and reliability in its classIndustry-leading 2000W Class-D amplifier with transparent system limiting and protectionSuperior sound with Advanced Impulse™ DSP tuning and Intelligent Bass Management™High-performance transducers and custom SymX™ Horn for unmatched clarity and accuracySRM Mix Control™ built-in 4-channel digital mixer with Bluetooth®Complete wireless control via the SRM Connect™ appWirelessly link 2 SRM | V-Class speakers together for music streaming applications plus controlDual-angle pole mount plus angled design for use as a floor monitor

ART 735-A MK5 is a unique product in its category. The 3,0" compression driver offers unique vocal clarity and sound projection. The 15” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections.Features132 dB Max SPL1400 WATT 2-way peak power90° x 60°, Wide dispersion constant directivity hornInnovative DSP Processing3,0" Titanium diaphragm Compression Driver15" WooferFiRPHASE TechnologyXBOOST Low Frequencies EnhancerPowerful Class D AmplifiersRCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. ART 7 amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the ART 7 amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.Legendary TransducersSuperior Compression DriversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent WooferThe low-frequency transducer is a high-power 15’’ woofer with a 3" voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.

Mackie Thump210, αυτοενισχυόμενο ηχείο, 10 ιντσών, ισχύος 1400W Class D, απόκριση συχνότητας 52Hz – 23kHz και maximum SPL 127dB. Ηχείο με επιλογή λειτουργίας για εσωτερική και εξωτερική χρήση. Διαθέτει λειτουργίες Music Ducking & Feedback Eliminator ενώ υπάρχει η δυνατότητα επιλογής ηχητικών προφίλ. Μπορεί να συνδεθεί ενσύρματα με δεύτερο ηχείο Τhump 210. Διαθέτει φωλιά για τοποθέτηση σε τρίποδο και χερούλια για την εύκολη μεταφορά του.

Αυτοενισχυόμενο ηχείο 2 δρόμων σε πλαστική καμπίνα με woofer 15" και κόρνα 1,4"Ενισχυτής 1000W RMS class D με limiter (διασπορά 90 Χ 60)Απόκριση συχνότητας 42-20000Hz, 129dB max SPLΔιαθέτει σύνδεση BLUETOOTH για χειρισμό μέσω εφαρμογής (QuickSmart app) και StreamingΕνσωματωμένη ψηφιακή κονσόλα DYNACORD μίξης 3 καναλιώνΟι 2 είσοδοι μίξης με Line Balanced XLR combo/ jack με Phantom power 24V και επιπλέον HiZ in στην έισοδο 2. 1 κανάλι μίξης Bluetooth. Link out με Balanced XLRΔιαθέτει επεξεργαστή DSP (Color LCD Screen) με επιλεγόμενη ρύθμιση τοποθέτησης (monitor, kickback, pole, bracket)Επιλογή λειτουργίας 5 θέσεων (Music, Live, Speech, club, Full Range Flat), ρύθμιση high pass (80Hz, 100Hz, 120Hz, 150Hz, ELX200-12SP, ELX200-18SP, EKX-15SP, EKX-18SP) και eq 3 περιοχώνInput preset 15 επιλογών για μικρόφωνα, όργανα & LineDigital effect 30 επιλογών (Reverb, Delay, Chorus, Echo)Επιλογή γραφικού Eq 7 περιοχών ή παραμετρικού Eq 7 Περιοχών στο MasterΔιαθέτει φωλιά για βάση στήριξης

Αυτοενισχυόμενο ηχείο 2 δρόμων σε πλαστική καμπίνα με woofer 8" και κόρνα 1,4"Ενισχυτής 1000W RMS class D με limiter (διασπορά 90 Χ 60)Απόκριση συχνότητας 50-20000Hz, 126dB max SPLΔιαθέτει σύνδεση BLUETOOTH για χειρισμό μέσω εφαρμογής (QuickSmart app) και StreamingΕνσωματωμένη ψηφιακή κονσόλα DYNACORD μίξης 3 καναλιώνΟι 2 είσοδοι μίξης με Line Balanced XLR combo/ jack με Phantom power 24V και επιπλέον HiZ in στην έισοδο 2. 1 κανάλι μίξης Bluetooth. Link out με Balanced XLRΔιαθέτει επεξεργαστή DSP (Color LCD Screen) με επιλεγόμενη ρύθμιση τοποθέτησης (monitor, kickback, pole, bracket)Επιλογή λειτουργίας 5 θέσεων (Music, Live, Speech, club, Full Range Flat), ρύθμιση high pass (80Hz, 100Hz, 120Hz, 150Hz, ELX200-12SP, ELX200-18SP, EKX-15SP, EKX-18SP) και eq 3 περιοχώνInput preset 15 επιλογών για μικρόφωνα, όργανα & LineDigital effect 30 επιλογών (Reverb, Delay, Chorus, Echo)Επιλογή γραφικού Eq 7 περιοχών ή παραμετρικού Eq 7 Περιοχών στο MasterΔιαθέτει φωλιά για βάση στήριξης

Αυτοενισχυόμενο ηχείο 2 δρόμων σε πλαστική καμπίνα με woofer 12" και κόρνα 1,4"Ενισχυτής 1000W RMS class D με limiter (διασπορά 90 Χ 60)Απόκριση συχνότητας 48-20000Hz, 127dB max SPLΔιαθέτει σύνδεση BLUETOOTH για χειρισμό μέσω εφαρμογής (QuickSmart app) και StreamingΕνσωματωμένη ψηφιακή κονσόλα DYNACORD μίξης 3 καναλιώνΟι 2 είσοδοι μίξης με Line Balanced XLR combo/ jack με Phantom power 24V και επιπλέον HiZ in στην έισοδο 2. 1 κανάλι μίξης Bluetooth. Link out με Balanced XLRΔιαθέτει επεξεργαστή DSP (Color LCD Screen) με επιλεγόμενη ρύθμιση τοποθέτησης (monitor, kickback, pole, bracket)Επιλογή λειτουργίας 5 θέσεων (Music, Live, Speech, club, Full Range Flat), ρύθμιση high pass (80Hz, 100Hz, 120Hz, 150Hz, ELX200-12SP, ELX200-18SP, EKX-15SP, EKX-18SP) και eq 3 περιοχώνInput preset 15 επιλογών για μικρόφωνα, όργανα & LineDigital effect 30 επιλογών (Reverb, Delay, Chorus, Echo)Επιλογή γραφικού Eq 7 περιοχών ή παραμετρικού Eq 7 Περιοχών στο MasterΔιαθέτει φωλιά για βάση στήριξης

Mackie Thrash212 GO, αυτοενισχυόμενο ηχείο 12" ιντσών με ισχύ 300W και απόκριση συχνότητας 52Hz - 20kHz στα -10dB. Το νέο Thrash212 GO είναι εύκολο στη μεταφορά του, έχει Bluetooth και επαναφορτιζόμενη μπαταρία που αλλάζει εύκολα με αυτονομία που φτάνει τις 10 ώρες. Διαθέτει ενισχυτή τάξης D ενώ η λειτουργία Bluetooth πέρα από τό streaming μουσικού περιεχομένου προσφέρει την δυνατότητα σύνδεσης με δεύτερο Thrash212 GO. Είναι κατασκευασμένο με τη γνωστή φιλοσοφία της Mackie, Built-Like-A-Tank για να αντέχει την σκληρή χρήση και τις συχνές μετακινήσεις ενώ ταυτόχρονα διατηρεί χαμηλό βάρος. Στην πίσω πλευρά υπάρχουν όλες οι απαραίτητες ενδείξεις που αφορούν την μπαταρία και τις συνδέσεις με Bluetooth, είσοδοι και έξοδοι και έλεγχος έντασης Master αλλά και κάθε καναλιού.Πληροφορίες ΜπαταρίαςΤύπος Μπαταρίας: Lithium IonΔιάρκεια μπαραρίας: μέχρι 10 ώρεςΔιάρκεια φόρτισης: 5 ώρες (χωρίς σήμα) / 7 ώρες (με σήμα)Χωρητικότητα: 12500mAhΤάση: 11.1VΕύρος θερμοκρασίας λειτουργίας: –10 ~ 40?C // 14 ~ 104?FΕύρος θερμοκρασίας φόρτισης: –10 ~ 45?C // 14 ~ 113?F

Mackie ShowBox, φορητό αυτοενισχυόμενο ηχείο με μπαταρία και αποσπώμενο μίκτη 6 καναλιών, με ισχύ 400W, max SPL 122dB και απόκριση συχνότητας 48Hz-20KHz στα -10dB. Σχεδιασμένο για τον δρόμο το ηχείο αυτό αποτελεί ένα ολοκληρωμένο σύστημα PA στο οποίο μπορούν να συνδεθούν κιθάρες αλλά και μικρόφωνο.Το Showbox δίνει τον απόλυτο έλεγχο με τον αποσπώμενο μίκτη 6 καναλιών που φιλοξενεί στην μία του πλευρά. Επίπεδα εντάσεων για μικρόφωνα και όργανα, εφέ, EQ, looper, tuner και πολλές άλλες ρυθμίσεις είναι μερικές από τις δυνατότητες που προσφέρει το νέο αυτό ηχείο.Η επαναφορτιζόμενη μπαταρία του μπορεί να τροφοδοτήσει το ηχείο για 12 ώρες ενώ στη πίσω του πλευρά υπάρχει θύρα για SD κάρτα στην οποία μπορεί να γίνει εγγραφή του live και USB-C θύρα για σύνδεση σε υπολογιστή ή για live stream.Το Showbox διαθέτει δύο επιλογές λειτουργίας PA και AMP, εφέ για κιθάρα αλλά και για φωνή, FX loop για πετάλια και ρυθμίσεις για λειτουργία σε εσωτερικούς ή εξωτερικούς χώρους. Επισης περιλαμβάνονται ξεχωριστά 3-band παραμετρικά EQ και compressor σε κάθε κανάλι με το πάτημα ενός κουμπιού.

Το Rcf ART 715-A MK5 το Best Seller της RCF ανεβαίνει επίπεδο με την 5η γενιά της σειράς 7. Είναι εξαιρετικής ποιότητας ηχείο, κατάλληλο για κάθε εφαρμογή. Μοναδικό στην κατηγορία του. Το Driver με ειδικά σχεδιασμένο θόλο και πηνίο υψηλής ισχύος προσφέρει μοναδική καθαρότητα και απόλυτη κάλυψη . Το 15’’ Woofer προσφέρει φοβερά γραμμική απόκριση και ακριβή χειρισμό στις χαμηλές συχνότητες σε όλο το φάσμα. Ο ενισχυτής είναι 1400Watt και ελέγχεται από DSP που διαχειρίζεται το Crossing το Equalizer τον έλεγχο φάσης αλλά μεταξύ άλλων και Soft Limiting για την προστασία του μεγαφώνου. 

With more powerful performance, S1 Pro+ gets even louder than its predecessor. So you can be a vibe any time you bring this portable PA system to a gig.An integrated 3-channel mixer lets you bring the loud:Channels 1 and 2 for mics and instrumentsChannel 3 for Bluetooth streaming or AUX inputPortable with a handle, it’s easy to go from your car to the curb to the venue — if it’s the neighborhood bar or your neighbor’s backyard. Or make it both with this battery-powered PA system that offers up to 11 hours of play time.*An audio engineer in your pocketControl this professional Bluetooth speaker with the Bose Music app, plus get the entire ToneMatch presets library and keep track of Bluetooth connections.Everything you need for a great showCycle through volume, treble, and bass for each channel and access ToneMatch presets and reverb settings for Channels 1 and 2. Change positions and the OLED displays automatically rotate.Mix work & PLAYBetween shows, stream music with your phone to add professional sound to your party. The S1 Pro+ is our most powerful Bluetooth party speaker. And if your friends think they can sing better than you, connect a mic, throw a karaoke night, and prove them wrong.Be ready for any venue with four positioning options and Auto EQ, which senses the orientation to adjust settings for the best performance.TILTED BACK ON FLOORVERTICALLY ON TABLEMOUNTED ON STANDMONITOR MODELive Stream mode allows the system to be recognized as an audio interface when you connect it to your computer using a USB-C® cable. This lets you perform live for an online audience or record audio directly to your computer’s digital audio workstation (DAW).When Live Stream mode is enabled, the system passes a dual mono mix of Channels 1, 2, and 3 to a connected computer. In this mode, the channel volume controls behave like faders on a mixer. Adjusting channel volume using either the channel controls or the Bose Music app, adjusts the level of that channel within the mix being sent to your computer.A monitor volume control also appears on Channel 3, allowing you to adjust the master volume of the system speakers without affecting the computer mix. Once you enable Live Stream mode, it stays enabled until you disable it, or the system powers off.

Το νέο Thump 215XT της Mackie είναι ενεργό ηχείο 15" με ενσωματωμένο ενισχυτή Class-D 1400W, απόκριση συχνότητας 40 Hz – 23 kHz και Max SPL: 129 dB. Είναι εξοπλισμένα με Feedback Eliminator και λειτουργία Music Ducking για μείωση των ανεπιθύμητων θορύβων. Διαθέτει bluetooth για streaming, σύνδεση ηχείων και έλεγχο τους.

Το νέο Thump 212XT της Mackie είναι ενεργό ηχείο 12" με ενσωματωμένο ενισχυτή Class-D 1400W, απόκριση συχνότητας 47 Hz – 23 kHz και Max SPL: 128 dB.Είναι εξοπλισμένα με Feedback Eliminator και λειτουργία Music Ducking για μείωση των ανεπιθύμητων θορύβων. Διαθέτει bluetooth για streaming, σύνδεση ηχείων και έλεγχο τους.

Το νέο Thump 215 της Mackie είναι ενεργό ηχείο 15" με ενσωματωμένο ενισχυτή Class-D 1400W, απόκριση συχνότητας 40 Hz – 23 kHz και Max SPL: 129 dB.Είναι εξοπλισμένα με Feedback Eliminator και λειτουργία Music Ducking για μείωση των ανεπιθύμητων θορύβων.

Το νέο Thump 212 της Mackie είναι ενεργό ηχείο 12" με ενσωματωμένο ενισχυτή Class-D 1400W, απόκριση συχνότητας 47 Hz – 23 kHz και Max SPL: 128 dB. Τα νέα αυτοενισχυόμενα ηχεία Mackie Thump είναι η εξέλιξη της απίστευτα δημοφιλούς σειράς, γεμάτα με περισσότερη ισχύ και δυνατότητες. Πλήρως επανασχεδιασμένα από την αρχή για αυξημένη αντοχή και φορητότητα, τα Thump διαθέτουν heavy-duty μεγάφωνα, ενισχυτές 1400W και ισχυρά εργαλεία για να κάνουν την επόμενη συναυλία σου πιο εύκολη από ποτέ. Είναι εξοπλισμένα με Feedback Eliminator και λειτουργία Music Ducking για μείωση των ανεπιθύμητων θορύβων.

Mackie Thump GO, ενεργό ηχείο με bluetooth και μπαταρία ιδανικό για να το πας παντού! Φτιάχτηκε για να κάνει τη ζωή σου πολύ πιο εύκολη, καθώς σοτάρετε πολύ γρήγορα και προσφέρει εξαιρετικό ηχητικό αποτέλεσμα και μεγάλη ευελιξία. Ελέγχεται ασύρματο μέσω της εφαρμογής Thump Connect 2 app.

DescriptionART 945-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of neodymium transducers - 4" titanium compression driver, 15" woofer - two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 135 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND940 Compression Driver in pure Titanium with a 4 inches voice coil allows a crossover point at only 650 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 15’’ neodymium woofer with a 3.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.Ready for heavy-duty applicationsThe highly innovative entertainment industry is permanently evolving accompanied by increasing demands on interconnection systems. Particular environmentally sealed connectors are highly requested for heavy-duty and harsh environment applications of entertainment equipment. ART 945-A features True Outdoor Protection (TOP) PowerCON TRUE1 power input connectors. These ruggedized sealed connectors feature not only IP protection but also UV resistance approved according to UL50E.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 935-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 3" titanium/neodymium compression driver, 15" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 133 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 15’’ woofer with a 3" voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 915-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 15" woofer, two-channel 2100W amplifier, and a constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 131 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 910-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 10" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control (BMC) DSP processing, perfectly tuned for each model, audiences will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss.ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels.All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: A new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 932-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 3" titanium/neodymium compression driver, 12" woofer - two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 132 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available. Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacoustisThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 12" woofer with a 2.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 912-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 12" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available. Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacoustisThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

Περιγραφή Ενεργό ηχείο 12” ισχύος 1300W προσφέρει δυνατό καθαρό ήχο. Κατάλληλο για μουσικούς, μικρές μπάντες, street performers, animater και άλλους που θέλουν ένα δυνατό και εύκολο setup. Διαθέτει: Class D ενισχυτή 1300WΣτιβαρή κατασκευή (Built-Like-A-Tank™)Ιδιαίτερα ελαφρύ (κατάλληλο για mobile χρήση)Απόκριση Συχνότητας: 52Hz – 20kHz (-10dB)Μax SPL: 125 dBΕυελιξία στη συνδεσιμότητα: Διαθέτει 2 εισόδους mic/line με combo (XLR/TRS) βύσμα και μία έξοδο mix out (XLR male) 12” Woofer1” Compression driver τιτανίουΦωλιά Standard για τοποθέτηση σε τρίποδο4 χειρολαβές (στο πάνω, κάτω μέρος και στα πλάγια) για εύκολη μετακίνησηΚαμπίνα με διπλή γωνία για τοποθέτηση ως monitorΣήμα ηχείου περιστρεφόμενο

ΠεριγραφήΕνεργό ηχείο 15” ισχύος 1300W προσφέρει δυνατό καθαρό ήχο. Κατάλληλο για μουσικούς, μικρές μπάντες, street performers, animater και άλλους που θέλουν ένα δυνατό και εύκολο setup. Διαθέτει: Class D ενισχυτή 1300WΣτιβαρή κατασκευή (Built-Like-A-Tank™)Ιδιαίτερα ελαφρύ (κατάλληλο για mobile χρήση)Απόκριση Συχνότητας: 38Hz – 20kHz (-10dB)Μax SPL: 126 dBΕυελιξία στη συνδεσιμότητα: Διαθέτει 2 εισόδους mic/line με combo (XLR/TRS) βύσμα και μία έξοδο mix out (XLR male) 15” Woofer1” Compression driver τιτανίουΦωλιά Standard για τοποθέτηση σε τρίποδο4 χειρολαβές (στο πάνω, κάτω μέρος και στα πλάγια) για εύκολη μετακίνησηΚαμπίνα με διπλή γωνία για τοποθέτηση ως monitorΣήμα ηχείου περιστρεφόμενο

Aυτοενισχυόμενο πλαστικό ηχείο 2way, 1x15in, 1x1,4in, 90x60 διασπορά, 50Hz-20KHz,  ισχύς Dynamic: 1000W (LF:800W, HF:200W), Continuous: 465W (LF:400W, HF:65W),  (class-D), με DSP. Κλίση καμπίνας 50ο για χρήση monitor.  Διαθέτει 2 εισόδους, 1xMIC/Line combo XLR, 1x/Line combo XLR/RCA L/R και XLR LINK OUT. Δυνατότητα rigging 2x Bottom, 1xRear, M8, Μax SPL 132dB, διαστάσεις 45.5x70x37.8cm. Βάρος 19.3 Kgr.     ΠΡΟΣΟΧΗ :Η τιμή αφορά Τεμάχιο και όχι Ζεύγος

Αυτοενισχυόμενο ηχείο 2 δρόμων με 10" μεγάφωνο και bass reflex σχεδίαση. 

Αυτοενισχυόμενο ηχείο 2 δρόμων με 12’’ μεγάφωνο και bass reflex σχεδίαση. 

Compact διαστάσεων με ισχυρή απόδοση, 1000 W peak power Class-D amplifier module. Εύκολα επιλέξιμα προγράμματα για τις πιο συνήθης εφαρμογές.Προδιαγραφές:Compact διαστάσεων με ισχυρή απόδοση1000 W peak power Class-D amplifier moduleΕύκολα επιλέξιμα προγράμματα για τις πιο συνήθης εφαρμογέςAdvanced DSP με Intrinsic Correction™ για εξαιρετική ποιότητα ηχου και προστασία των ηχείωνDirectivity Matched Transition™ (DMT) για σταθερή απόκριση συχνότητας σε όλη την περιοχή κάλυψης.Εξαιρετικά ελαφρύ κατάλληλο για φορητές εφαρμογέςΚομψό designΚατάλληλο για χρήση σαν main PA, stage monitor αλλά και σαν ενισχυτής μουσικών οργάνων35 mm pole socketΔιαθέσιμα αξεσουάρ: yoke, τσάντα μεταφοράς (tote), και κάλυμμα (outdoor cover) – δεν περιλαμβάνονται στη συσκευασία.Πληροφορίες για EASE και CAD διαθέσιμες στο διαδίκτυο3- χρόνια εγγύηση με registrationΧαρακτηριστικά:LF Driver: 12", coneHF Driver: 1,4" Compression driverFrequency Response (-6 dB): 49 - 20 kHzFrequency Response (-10 dB): 47 - 20 kHzNominal Coverage Angle: 75° AxisymetricMaximum Rated SPL1: 126 dBAmplifier: Class D, Peak: 800 W (LF), 200 W (HF)Controls: Power, 2 x Gain, Mic Boost Push Switch, 6-way Contour Selection SwitchIndicators: Power LED, 2 x Input Signal LED, Input B MIC selected LED, Limiter active LEDConnectors: 2 x locking XLR/F 1/4" combo (Line Input and Mic/Line input), 1 x 3.5 mm TRS (Stereo Input), 1 x XLR/M (Mix Output), 1 x IEC power connectorEnclosure Material: PolypropyleneAttachment Points: M10 threaded insertColor: Black (RAL 9011)Grille: 18 Gauge powder-coated steelDimensions: 516 x 350 x 323 mmNet Weight: 13,7kgShipping Weight: 16,5kgRegulatory: EMC, UL, CBOptional Accessories: CP12 Tote, CP12 Outdoor Cover, CP12 Yoke

Compact διαστάσεων με ισχυρή απόδοση, 1000 W peak power Class-D amplifier module. Εύκολα επιλέξιμα προγράμματα για τις πιο συνήθης εφαρμογές.Προδιαγραφές:Compact διαστάσεων με ισχυρή απόδοση1000 W peak power Class-D amplifier moduleΕύκολα επιλέξιμα προγράμματα για τις πιο συνήθης εφαρμογέςAdvanced DSP με Intrinsic Correction™ για εξαιρετική ποιότητα ηχου και προστασία των ηχείωνDirectivity Matched Transition™ (DMT) για σταθερή απόκριση συχνότητας σε όλη την περιοχή κάλυψης.Εξαιρετικά ελαφρύ κατάλληλο για φορητές εφαρμογέςΚομψό designΚατάλληλο για χρήση σαν main PA, stage monitor αλλά και σαν ενισχυτής μουσικών οργάνων35 mm pole socketΔιαθέσιμα αξεσουάρ: yoke, τσάντα μεταφοράς (tote), και κάλυμμα (outdoor cover) – δεν περιλαμβάνονται στη συσκευασία.Πληροφορίες για EASE και CAD διαθέσιμες στο διαδίκτυο3- χρόνια εγγύηση με registrationΧαρακτηριστικά:Τύπος: Two-way acticeLF Driver: 8", coneHF Driver: 1,4" Compression driverFrequency Response (-6 dB): 56 - 20 kHzFrequency Response (-10 dB): 53 - 20 kHzNominal Coverage Angle: 90° AxisymetricMaximum Rated SPL1: 124 dBAmplifier: Class D, Peak: 800 W (LF), 200 W (HF)Controls: Power, 2 x Gain, Mic Boost Push Switch, 6-way Contour Selection SwitchIndicators: Power LED, 2 x Input Signal LED, Input B MIC selected LED, Limiter active LEDConnectors: 2 x locking XLR/F ?” combo (Line Input and Mic/Line input), 1 x 3.5 mm TRS (Stereo Input), 1 x XLR/M (Mix Output), 1 x IEC power connectorEnclosure Material: PolypropyleneAttachment Points: M10 threaded insertColor: Black (RAL 9011)Grille: 18 Gauge powder-coated steelDimensions: 411 x 273 x 256 mmNet Weight: 9,5kgShipping Weight: 11,5kgRegulatory: EMC, UL, CBOptional Accessories: CP8 Tote, CP8 Outdoor Cover, CP8 Yoke

AIR12: Ευέλικτο, κομψό και εύκολο στη μεταφορά.Τα συμπαγή και ελαφριά, ενεργά ηχεία AIR10 παρέχουν πλούσια χαμηλή περιοχή και φυσικά πρίμα, σε ένα στιβαρό πλαίσιο που θα χωρέσει εύκολα στο πίσω κάθισμα ενός μικρού αυτοκινήτου. Διαθέτει έναν δυνατό ενισχυτή 1200 W Class D / Class AB με εύχρηστες λειτουργίες μέσω του ψηφιακού DSP, το AIR12 σας δίνει όλη την ισχύ και τα εργαλεία που χρειάζεστε τόσο για φορητή όσο και για μόνιμη εγκατάσταση.Το Αir 12 χρησιμοποιεί διαφορετικούς τύπους ενισχυτών για κάθε οδηγό.Τα AIR12 διαθέτουν ενισχυτές Class D και Class A / B για να παρέχουν τη βέλτιστη απόκριση σε όλο το εύρος συχνοτήτων.Ένας ενισχυτής class D 500W οδηγεί το μεγάφωνο 12 ιντσών, παρέχοντας αποτελεσματική ένταση όταν το χρειάζεστε. Ένας ενισχυτής 200W (RMS), Class AB, τροφοδοτεί τον οδηγό υψηλής συχνότητας 1 ίντσας, παρέχοντας έναν απίστευτα φυσικό ήχο. Ο συνδυασμός μπορεί να αποδώσει έως και 121 dB SPL γλυκό, καθαρό ήχο μεταξύ 66 Hz και 20 kHz.Γρήγορη και εύκολη τοποθέτηση.Το AIR12 είναι εξοπλισμένο με έναν εύκολο στη χρήση επεξεργαστή σήματος, ο οποίος διευκολύνει την προσαρμογή του ήχου με το πάτημα ενός κουμπιού. Οι προεπιλογές προσαρμόζουν την απόκριση του AIR12 για οποιαδήποτε χρήση, ως stage monitors, για αναπαραγωγή μουσικής (π.χ. για DJs), ακόμα και για την κάλυψη εκδηλώσεων μουσικής και ομιλίες.Τα χειριστήρια πρίμων και μπάσων σας επιτρέπουν να αυξήσετε ή να μειώσετε κατά 10 dB για να ισοσταθμίσετε το ηχείο σε οποιονδήποτε χώρο.Ευέλικτη τοποθέτηση για ποικίλες εφαρμογές.Η πλαστική καμπίνα του AIR12 μπορεί να τοποθετηθεί με διάφορους τρόπους, παρέχοντας τεράστια ευελιξία.Μπορεί να τοποθετηθεί σε μία βάση τοίχου , όρθιο ή στο πλάι σαν stage monitor.Τα μεγάφωνα AIR προσφέρουν μια επιλογή εισόδων έτσι ώστε να μπορείτε να τα χρησιμοποιήσετε με διάφορες πηγές. Διαθέτει δύο combo εισόδους XLR mic / TRS line, κάθε μία με προενισχυτή μικροφώνου Class A και ανεξάρτητο έλεγχο gain. Μία είσοδος mini Jack 1/8 "δέχεται σήματα από smartphones, tablet και άλλες συσκευές ήχου.Αλλά το καλύτερο για τα ηχεία AIR-series είναι ο καθαρός, φυσικός τους ήχος «AIR-y».Έξι χρόνια χωρίς προβλήματα. Με Εγγύηση.

AIR10: Ευέλικτο, κομψό και εύκολο στη μεταφορά. Τα συμπαγή και ελαφριά, ενεργά ηχεία AIR10 παρέχουν πλούσια χαμηλή περιοχή και φυσικά πρίμα, σε ένα στιβαρό πλαίσιο που θα χωρέσει εύκολα στο πίσω κάθισμα ενός μικρού αυτοκινήτου. Διαθέτει έναν δυνατό ενισχυτή 1200 W Class D / Class AB με εύχρηστες λειτουργίες μέσω του ψηφιακού DSP, το AIR10 σας δίνει όλη την ισχύ και τα εργαλεία που χρειάζεστε τόσο για φορητή όσο και για μόνιμη εγκατάσταση. Το Αir 10 χρησιμοποιεί διαφορετικούς τύπους ενισχυτών για κάθε οδηγό. Τα AIR10 διαθέτουν ενισχυτές Class D και Class A / B για να παρέχουν τη βέλτιστη απόκριση σε όλο το εύρος συχνοτήτων.Ένας ενισχυτής class D 500W οδηγεί το μεγάφωνο 10 ιντσών, παρέχοντας αποτελεσματική ένταση όταν το χρειάζεστε. Ένας ενισχυτής 200W (RMS), Class AB, τροφοδοτεί τον οδηγό υψηλής συχνότητας 1 ίντσας, παρέχοντας έναν απίστευτα φυσικό ήχο. Ο συνδυασμός μπορεί να αποδώσει έως και 121 dB SPL γλυκό, καθαρό ήχο μεταξύ 66 Hz και 20 kHz. Γρήγορη και εύκολη τοποθέτηση. Το AIR10 είναι εξοπλισμένο με έναν εύκολο στη χρήση επεξεργαστή σήματος, ο οποίος διευκολύνει την προσαρμογή του ήχου με το πάτημα ενός κουμπιού. Οι προεπιλογές προσαρμόζουν την απόκριση του AIR10 για οποιαδήποτε χρήση, ως stage monitors, για αναπαραγωγή μουσικής (π.χ. για DJs), ακόμα και για την κάλυψη εκδηλώσεων μουσικής και ομιλίες. Τα χειριστήρια πρίμων και μπάσων σας επιτρέπουν να αυξήσετε ή να μειώσετε κατά 10 dB για να ισοσταθμίσετε το ηχείο σε οποιονδήποτε χώρο. Ευέλικτη τοποθέτηση για ποικίλες εφαρμογές. Η πλαστική καμπίνα του AIR10 μπορεί να τοποθετηθεί με διάφορους τρόπους, παρέχοντας τεράστια ευελιξία.Μπορεί να τοποθετηθεί σε μία βάση τοίχου , όρθιο ή στο πλάι σαν stage monitor.Τα μεγάφωνα AIR προσφέρουν μια επιλογή εισόδων έτσι ώστε να μπορείτε να τα χρησιμοποιήσετε με διάφορες πηγές.  Διαθέτει δύο combo εισόδους XLR mic / TRS line, κάθε μία με προενισχυτή μικροφώνου Class A και ανεξάρτητο έλεγχο gain. Μία είσοδος mini Jack 1/8 "δέχεται σήματα από smartphones, tablet και άλλες συσκευές ήχου. Αλλά το καλύτερο για τα ηχεία AIR-series είναι ο καθαρός, φυσικός τους ήχος «AIR-y». Έξι χρόνια χωρίς προβλήματα. Με Εγγύηση. Χαρακτηριστικά: Ρύθμιση 2 δρόμων Εύρος συχνοτήτων (-3 dB) 66 Hz έως 20 kHz Εύρος συχνοτήτων (-10 dB) 55 Hz έως 20 kHz Crossover Frequency 2.2 kHz Μέγιστη έξοδος 121 dB SPL Ονομαστική διασπορά (HxV) 90˚x 60˚ LF Driver 10" HF Driver 1" Ενισχυτής Τύπος ενισχυτή Class D (LF), Class AB (HF) Συνολική ισχύς συστήματος 1,200W (μέγιστο) LF Power 900W HF Power 300W Συνδέσεις και στοιχεία ελέγχου Είσοδοι 2 x Combo / Line XLR / TRS. 1 στερεοφωνικό TRS 1 x 1/8 " Εξόδους 1 x XLR Mix Out

AIR15: Ευέλικτο, κομψό και εύκολο στη μεταφορά. Τα συμπαγή και ελαφριά, ενεργά ηχεία AIR15 παρέχουν πλούσια χαμηλή περιοχή και φυσικά πρίμα, σε ένα στιβαρό πλαίσιο που θα χωρέσει εύκολα στο πίσω κάθισμα ενός μικρού αυτοκινήτου. Διαθέτει έναν δυνατό ενισχυτή 1200 W Class D / Class AB με εύχρηστες λειτουργίες μέσω του ψηφιακού DSP, το AIR15 σας δίνει όλη την ισχύ και τα εργαλεία που χρειάζεστε τόσο για φορητή όσο και για μόνιμη εγκατάσταση. Το Αir 15 χρησιμοποιεί διαφορετικούς τύπους ενισχυτών για κάθε οδηγό. Τα AIR15 διαθέτουν ενισχυτές Class D και Class A / B για να παρέχουν τη βέλτιστη απόκριση σε όλο το εύρος συχνοτήτων.Ένας ενισχυτής class D 500W οδηγεί το μεγάφωνο 15 ιντσών, παρέχοντας αποτελεσματική ένταση όταν το χρειάζεστε. Ένας ενισχυτής 200W (RMS), Class AB, τροφοδοτεί τον οδηγό υψηλής συχνότητας 1 ίντσας, παρέχοντας έναν απίστευτα φυσικό ήχο. Ο συνδυασμός μπορεί να αποδώσει έως και 124 dB SPL γλυκό, καθαρό ήχο μεταξύ 47 Hz και 20 kHz. Γρήγορη και εύκολη τοποθέτηση. Το AIR15 είναι εξοπλισμένο με έναν εύκολο στη χρήση επεξεργαστή σήματος, ο οποίος διευκολύνει την προσαρμογή του ήχου με το πάτημα ενός κουμπιού. Οι προεπιλογές προσαρμόζουν την απόκριση του AIR15 για οποιαδήποτε χρήση, ως stage monitors, για αναπαραγωγή μουσικής (π.χ. για DJs), ακόμα και για την κάλυψη εκδηλώσεων μουσικής και ομιλίες.Τα χειριστήρια πρίμων και μπάσων σας επιτρέπουν να αυξήσετε ή να μειώσετε κατά 10 dB για να ισοσταθμίσετε το ηχείο σε οποιονδήποτε χώρο. Ευέλικτη τοποθέτηση για ποικίλες εφαρμογές. Η πλαστική καμπίνα του AIR15 μπορεί να τοποθετηθεί με διάφορους τρόπους, παρέχοντας τεράστια ευελιξία.Μπορεί να τοποθετηθεί σε μία βάση τοίχου , όρθιο ή στο πλάι σαν stage monitor. Τα μεγάφωνα AIR προσφέρουν μια επιλογή εισόδων έτσι ώστε να μπορείτε να τα χρησιμοποιήσετε με διάφορες πηγές. Διαθέτει δύο combo εισόδους XLR mic / TRS line, κάθε μία με προενισχυτή μικροφώνου Class A και ανεξάρτητο έλεγχο gain. Μία είσοδος mini Jack 1/8 "δέχεται σήματα από smartphones, tablet και άλλες συσκευές ήχου. Αλλά το καλύτερο για τα ηχεία AIR-series είναι ο καθαρός, φυσικός τους ήχος «AIR-y». Έξι χρόνια χωρίς προβλήματα. Με Εγγύηση. Χαρακτηριστικά: Ρύθμιση 2 δρόμων Εύρος συχνοτήτων (-3 dB) 47 Hz έως 20 kHz Εύρος συχνοτήτων (-10 dB) 40 Hz έως 20 kHz Crossover Frequency 1.6 kHz Μέγιστη έξοδος 124 dB SPL Ονομαστική διασπορά (HxV) 90˚x 60˚ LF Driver 15" HF Driver 1.35" Ενισχυτής Τύπος ενισχυτή Class D (LF), Class AB (HF) Συνολική ισχύς συστήματος 1,200W (μέγιστο) LF Power 900W HF Power 300W Συνδέσεις και στοιχεία ελέγχου Είσοδοι 2 x Combo / Line XLR / TRS. 1 στερεοφωνικό TRS 1 x 1/8 " Εξόδους 1 x XLR Mix Out

Παθητικό ηχείο 2 δρόμων, τύπου bass reflex, 12" woofer + 3" HF driver με μαγνήτη νεοδυμίου. Ισχύς 800WRMS, 1600W program, 3200W peak, 8 Ωhm, max SPL 135dB, απόκριση συχνότητας 57Hz- 20kHz (-3dB), διασπορά 90° x 50°. Στιβαρή κατασκευή από 18mm plywood και duraflex επένδυση, διαθέτει 3 χερούλια μεταφοράς, 12 σημεία στήριξης Μ10, υποδοχή 36mm για τρίποδα και ειδικά πόδια για χρήση ως μόνιτορ (γωνία 50°). Input και loop thru NL4 neutrik connectors. Ιδανικό για εταιρίες ενοικιάσεως ήχου, DJ sets, μόνιμες εγκαταστάσεις. Διαστάσεις 638 x 415x 429 (Υ x Π x Β), βάρος 24.9 kg, χρώμα μαύρο. Χαρακτηριστικά:Δυνατότητα Σύνδεσης με Bluetooth: NoImpedance: OhmEN54-24 Certified: NoLow Speaker Size: 12"Freq From (Hz): 57Freq Up to (Hz): 20000Shell Material: Birch-PlywoodΠοσότητα Παραγγελίας: 1Power Rating Continuous Watt/Ohm: 1600Max SPL Output (dB): 135Coverage Pattern: 90 X 50Nominal Impedance (Ohms): 8Speaker Type: Passive/ΠαθητικόΚατάλογος: ΕπαγγελματικάSpeaker System: Two WayWidth (cm): 41.5Depth (cm): 42.9Height (cm): 63.8Βάρος (Kg): 24.9

Παθητικό ηχείο 3 δρόμων, τύπου bass reflex, 15" woofer + 3" HF driver με μαγνήτη νεοδυμίου. Ισχύς 800W Cont., 1600W program, 3200W Peak. 8Ω, 137dB, Passive ή Bi-Amp mode, LF Driver: 2275F, MF Driver: 2107H, HF Driver: 2432H, Crossover Frequency: 330Hz & 2.4kHz, Απόκριση συχνότητας (-3dB): 43Hz - 17kHz, 476mm x 544mm x 984mm, 43.1 Kg.Χαρακτηριστικά:Impedance: OhmLow Speaker Size: 15"Freq From (Hz): 43Freq Up to (Hz): 20000Shell Material: WoodΠοσότητα Παραγγελίας: 1Power Rating Continuous Watt/Ohm: 800Max SPL Output (dB): 137Coverage Pattern: 60 x 40Nominal Impedance (Ohms): 8Speaker Type: Passive/ΠαθητικόΚατάλογος: ΕπαγγελματικάSpeaker System: Three WayWidth (cm): 54.4Color: Black/ΜαύροPower Rating: 2000 W PeakΜήνες Εγγύησης: 12Depth (cm): 47.6Mid Speaker Size: 6.5''Height (cm): 98.4Βάρος (Kg): 43.09High Speaker Size: 3"

he HD 12-A offers an extremely linear response and a precise, deep low frequency control. The 12” woofer guarantee a superior sound projection indoor and outdoor. It is the ideal speaker for main front of house in small PA systems, for high power monitoring and it is the best solution where higher power is required for various applications in larger venues.Προδιαγραφές:1200 WATT PEAK, 600 WATT RMSDigital Bi-ampDSP Sound ProcessingRCF Precision Transducers130 dB MAX SPLΧαρακτηριστικά:Frequency Response -3 dB: 45 Hz ÷ 20000 HzMax SPL: 130 dBHorizontal coverage angle: 90°Vertical coverage angle: 60°Compression Driver: 1", 1.7" voice coilWoofer: 12", 2.5" voice coilTotal power: 1200 W PEAK

Ενεργό ηχείο 2 δρόμων 10", 1.34" tweeter, 80W RMS, 94dB.Χαρακτηριστικά:Speaker System: Two WayΔυνατότητα Σύνδεσης με Bluetooth: YesLow Speaker Size: 10"Freq From (Hz): 55Freq Up to (Hz): 20000Shell Material: Plastic/SyntheticPower Rating Continuous Watt/Ohm: 80Max SPL Output (dB): 121Speaker Type: Active/ΕνεργόΜήνες Εγγύησης: 12Depth (cm): 32.5Height (cm): 51.5Βάρος (Kg): 7.8High Speaker Size: 1"Width (cm): 37.5Color: Black/Μαύρο

Ενεργό ηχείο 2 δρόμων 15", 1.75" tweeter, 250W RMS, 96dB.Χαρακτηριστικά:Speaker Type: Active/ΕνεργόΔυνατότητα Σύνδεσης με Bluetooth: YesLow Speaker Size: 15"Freq From (Hz): 50Freq Up to (Hz): 20000Shell Material: Plastic/SyntheticΠοσότητα Παραγγελίας: 1Power Rating Continuous Watt/Ohm: 250Max SPL Output (dB): 123Μήνες Εγγύησης: 12Depth (cm): 37.0Height (cm): 70.0Βάρος (Kg): 22.0High Speaker Size: 0.5"Speaker System: Two WayWidth (cm): 47.0Color: Black/Μαύρο

The NX 32-A is an active speaker specifically designed to be the everyday tool for rental companies and professional musicians. It’s one of the most flexible speaker for deploying high-quality sound as a stand-alone FOH system or as a satellite (with subwoofer) but either as a stage monitor or a or a front, down or side fill speaker.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Προδιαγραφές:1400 W 2-way class-D amplifier131 dB SPL Max50 – 20000 Hz Frequency Range90° x 60° constant directivity coverage12" woofer, 2.5" voice coilHorn loaded 3.0''neodymium c. driverMultiple rigging pointsΧαρακτηριστικά:RCF NX 32-A active speakerPower capacity: Peak: 1400 WMax. SPL: 131 dBFrequency response: 50 Hz - 20 kHzDispersion: 90 x 60°Wofer: 12 in, 3-inch voice coilTweeter: 1.4 in, 3-inch voice coilInput: XLR, jackOutput: XLRCrossover frequencies: 700 HzProtection: thermal, RMSLimiter: soft limiterControls: Volume, Boost, Mic/LineDimensions: 60 x 36.5 x 37.8 cmWeight: 21.1 kg 

The 4PRO 1031-A is a two-way active bass reflex loudspeaker offering extraordinary compact size, high output and vocal fidelity. It provides low distortion and consistent polar response in a flyable lightweight enclosure. The 4PRO 1031-A comprises a 10” woofer and a 1.4” voice coil compression driver that is mounted to a 90° x 60° constant directivity horn.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Προδιαγραφές:800 WATT PEAK, 400 WATT RMS127 dB max spl90 x 60, Wide dispersion constant directivity horn10" woofer, 2" voice coil1" HF driver,1.4" voice coilΧαρακτηριστικά:Frequency Response -3 Db: 50 Hz � 20000 HzMax Spl: 127 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 60°Compression Driver: 1", 1.4" Voice CoilWoofer: 10", 2" Voice CoilInput/output SectionInput Signal: Bal / UnbalInput Connectors: Combo Xlr-jckOutput Connectors: XlrInput Sensitivity: - 2 Dbu / +4 DbuProcessor SectionCrossover Frequencies: 1800 HzProtections: Thermal, RmsLimiter: Fast LimiterControls: Volume, Eq Shape, Mic/lineAmplifier SpecificationsTotal Power: 800 W Peak 

The 4PRO 2031-A is a two-way active bass reflex loudspeaker offering exceptional full range and accurate reproduction. The 12” woofer delivers a fast and accurate reproduction of the midbass frequency range and controlled deep bass while the 1” compression driver offers a very open and natural midrange sound and extreme precision high frequencies reproduction.The 4PRO 2031-A comprises a 12” woofer and a 1.7” voice coil compression driver that is mounted to a 90° x 60° constant directivity horn.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Προδιαγραφές:1200 WATT PEAK, 600 WATT RMS129 dB max spl90 x 60, Wide dispersion constant directivity horn12" woofer, 2.5" voice coil1" HF driver,1.7" voice coilΧαρακτηριστικά:Frequency Response -3 Db: 45 Hz � 20000 HzMax Spl: 129 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 60°Compression Driver: 1", 1.7" Voice CoilWoofer: 12", 2.5" Voice CoilInput/output SectionInput Signal: Bal / UnbalInput Connectors: Combo Xlr-jckOutput Connectors: XlrInput Sensitivity: - 2 Dbu / +4 DbuProcessor SectionCrossover Frequencies: 1700 HzProtections: Thermal, RmsLimiter: Fast LimiterControls: Volume, Eq Shape, Mic/lineAmplifier SpecificationsTotal Power: 1200 W PeakHigh Frequencies: 400 W PeakLow Frequencies: 800 W PeakTotal Power: 600 W Rms​