Βάσεις - Clamp μικροφώνων

Microphone clip mounts a handheld transmitter.

Ανταλλακτικό Clip για Πιάνο

Βασικά χαρακτηριστικά :Κλιπ ασύρματου πομπού GO για ρούχαΤο μαγνητικό κλιπ κρατά τα ρούχα στη θέση τουςΠαρέχει πλήρη ευελιξίαΜετατρέψτε τον ασύρματο πομπό σας GO σε ένα κομμάτι φορητής τεχνολογίας με το RODE MagClip GO, ένα μαγνητικό κλιπ που σας επιτρέπει να τοποθετήσετε τον πομπό σε σχεδόν οποιοδήποτε ρούχο. Στηρίξτε τον πομπό σε γραβάτα, γιακά πουκάμισου και άλλα.

Bάση για δύο μικρόφωνα για stereo ηχοληψία Χαρακτηριστικά: Bάρος:45gm Διαστάσεις:170mmH x 240mmW x 70mmD

Μπάρα στήριξης δύο μικρόφώνων που μπορεί να εφαρμοστεί σε μία βάση μικροφώνου εδάφους ή γραφείου .Η βάση προσφέρει τη δυνατότητα να διαμορφωθεί  η απόσταση μεταξί των μικροφώνων . 

Precision stereo microphone positioning made simple, reliable and repeatable The Spacebar microphone positioner allows for precise and repeatable setting of microphone capsule spacing, angle of incidence, and rotation around the x axis. With precision scales for angle and distance engraved on the Spacebar components, it becomes easy to make perfectly measured and repeatable stereo microphone setups. As well as being able to precisely set microphones in standard stereo configurations (i.e. XY, ORTF, NOS, and AB 50cm), the Spacebar allows for exact settings through the entire continuum of angle and spacing. This allows the user to adjust the stereo microphone array and tailor the pickup field to suit virtually any recording environmentWe highly recommend The Stereophonic Zoom by Michael Williams, a technical paper that provides detailed information on the relationship between angle of incidence, capsule spacing, and the effective angle of the recorded sound field. It is a very useful reference that can greatly increase the flexibility of your stereo microphone techniques.The Stereophonic Zoom can be downloaded from: http://www.microphone-data.com/pdfs/Stereo%20zoom.pdf The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel.Each system consists of a center stand clamp, horizontal bar, and microphone holders.The SB-30 and SB-66 are both supplied with two microphone holder assemblies and an additional tall microphone holder. The taller microphone holder body can be used to raise one microphone to avoid interference if the mic spacing requires that the microphone bodies overlap.The Spacebar system comes in two versions – the SB-30 and the SB-66, which provide the following microphone spacing: model minimum spacing maximum spacing SB-30 7cm (2.75”) 26cm (10.2”) SB-66 7cm (2.75”) 61cm (24”) Also available is a hanging bar (SB-HB-30/66) for installations where the positioner is hung from above.This accessory consists of a tube which mounts to the center clamp through which the microphone cable is threaded. This enables the spacebar to be hung by the microphone cable and positioned via side mounted guide wires.See detailed photo here.The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel. If properly cared for it will last a lifetime.

Precision stereo microphone positioning made simple, reliable and repeatable The Spacebar microphone positioner allows for precise and repeatable setting of microphone capsule spacing, angle of incidence, and rotation around the x axis.With precision scales for angle and distance engraved on the Spacebar components, it becomes easy to make perfectly measured and repeatable stereo microphone setups. As well as being able to precisely set microphones in standard stereo configurations (i.e. XY, ORTF, NOS, and AB 50cm), the Spacebar allows for exact settings through the entire continuum of angle and spacing.This allows the user to adjust the stereo microphone array and tailor the pickup field to suit virtually any recording environment We highly recommend The Stereophonic Zoom by Michael Williams, a technical paper that provides detailed information on the relationship between angle of incidence, capsule spacing, and the effective angle of the recorded sound field. It is a very useful reference that can greatly increase the flexibility of your stereo microphone techniques.The Stereophonic Zoom can be downloaded from: http://www.microphone-data.com/pdfs/Stereo%20zoom.pdf The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel.Each system consists of a center stand clamp, horizontal bar, and microphone holders.The SB-30 and SB-66 are both supplied with two microphone holder assemblies and an additional tall microphone holder. The taller microphone holder body can be used to raise one microphone to avoid interference if the mic spacing requires that the microphone bodies overlap.The Spacebar system comes in two versions – the SB-30 and the SB-66, which provide the following microphone spacing: model minimum spacing maximum spacing SB-30 7cm (2.75”) 26cm (10.2”) SB-66 7cm (2.75”) 61cm (24”) Also available is a hanging bar (SB-HB-30/66) for installations where the positioner is hung from above.This accessory consists of a tube which mounts to the center clamp through which the microphone cable is threaded. This enables the spacebar to be hung by the microphone cable and positioned via side mounted guide wires.See detailed photo here.The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel. If properly cared for it will last a lifetime.

Precision stereo microphone positioning made simple, reliable and repeatable The Spacebar microphone positioner allows for precise and repeatable setting of microphone capsule spacing, angle of incidence, and rotation around the x axis.With precision scales for angle and distance engraved on the Spacebar components, it becomes easy to make perfectly measured and repeatable stereo microphone setups. As well as being able to precisely set microphones in standard stereo configurations (i.e. XY, ORTF, NOS, and AB 50cm), the Spacebar allows for exact settings through the entire continuum of angle and spacing.This allows the user to adjust the stereo microphone array and tailor the pickup field to suit virtually any recording environment We highly recommend The Stereophonic Zoom by Michael Williams, a technical paper that provides detailed information on the relationship between angle of incidence, capsule spacing, and the effective angle of the recorded sound field. It is a very useful reference that can greatly increase the flexibility of your stereo microphone techniques.The Stereophonic Zoom can be downloaded from: http://www.microphone-data.com/pdfs/Stereo%20zoom.pdf The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel.Each system consists of a center stand clamp, horizontal bar, and microphone holders.The SB-30 and SB-66 are both supplied with two microphone holder assemblies and an additional tall microphone holder. The taller microphone holder body can be used to raise one microphone to avoid interference if the mic spacing requires that the microphone bodies overlap.The Spacebar system comes in two versions – the SB-30 and the SB-66, which provide the following microphone spacing: model minimum spacing maximum spacing SB-30 7cm (2.75”) 26cm (10.2”) SB-66 7cm (2.75”) 61cm (24”) Also available is a hanging bar (SB-HB-30/66) for installations where the positioner is hung from above.This accessory consists of a tube which mounts to the center clamp through which the microphone cable is threaded. This enables the spacebar to be hung by the microphone cable and positioned via side mounted guide wires.See detailed photo here.The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel. If properly cared for it will last a lifetime.

Σετ αξεσουάρ για πρόσδεση μικροφώνων Shotgun που περιλαμβάνει: Shock Mount για μικρόφωνα διαμέτρου 20.8~24mm, αντάπτορα Hot-Shoe σε σπείρωμα για φωτογραφική μηχανή, Hot-shoe mount για μικρόφωνα διαμέτρου 12~30mm, Hot-Shoe κλιπ με ανάρτηση, κλιπ πρόσδεσης σε Boom Pole με ανάρτηση.Χαρακτηριστικά: Shock mount for microphone diameters of 20.8~24mm with 5/8"x27 (15.88mm) threaded insert and 3/8" (9.53mm) threaded insert adapterHot-shoe adapter with 5/8"x27 studHot-shoe mount suspension clip for microphone diameters of 17~30mmHot-shoe shock mount for microphone diameters of 12~30mmSuspension clip for microphone diameters of 17~30mm with 5/8"x27 (15.88mm) threaded insert and 3/8" (9.53mm) threaded insert adapter

Ανταλλακτικό Clip για Drums  κ.α.

Clothing clip, plastic (black). Rotatable microphone position.

Audio Technica  AT8662Intended for use with gooseneck microphones mounted on lecterns, pulpits, conference tables and similar surfacesEffectively isolates microphone from noise, shock and vibration transmitted through the mounting surfaceEliminates pickup of low-frequency resonances caused by mechanical coupling

Audio Technica  AT8405aFits microphones with 21 mm body diameterCompatible with 5/8"-27 threaded stands

Audio Technica  AT8471Provides effective reduction of stand-transmitted noiseDependably maintains positioning while securely holding the microphoneCompatible with 5/8"-27 threaded stands

Audio Technica  AT8459Dual swivels provide unlimited number of positions for exact microphone placementCompatible with 5/8"-27 threaded standsFor use with any microphone using a stand clamp

Shure A400SM βάση για μικρόφωνα gooseneck .  

Σπιράλ πνευστών του BETΑ98/SM98.

Βραχίονας με σπιράλ BETA98/SM98 για τύμπανα.

Βραχίονας με σπιράλ & δαγκάνα για στήριξη στα τύμπανα ή και αλλού - μόνο για τα ΒΕΤΑ98/SM98.

Διπλή βάση για τα μικρόφωνα  Shure 545 Series, SM57 and Beta 57A.

Universal βάση μικροφώνου

Belt Clip και προστατευτικό κάλυμμα για το πομπό  FP3.

Πιστολοειδής λαβή για τα μικρόφωνα VideoMic και Stereo VideoMic 

Δαχτυλίδι για τα μικρόφωνα ΝΤ-2Α, ΝΤ-1000, ΝΤ-2000, ΝΤΚ, Κ2, Classic II, BroadCaster.

Το Α 25D είναι ένα άθραυστο clip μικροφώνου, κατάλληλο για τα M58, SM57, SM87A, Beta 87A, Beta 87C και όλα τα μικρόφωνα με διάμετρο ¾ της ίντσας και μεγαλύτερη.

Το Α 57F είναι ένα άθραυστο clip μικροφώνου, κατάλληλο για τα KSM137, KSM141, SM63, SM63L, SM63LB, SM81, VP64A, VP64AL, MX412, MX418, MX412S, MX418S, MX412SE, και MX418SE μικρόφωνα της Shure.

Bass microphone holder for DPA 4099 Bass microphone, black

Βάση μικροφώνου από μαλακό πλαστικό , που πιάνει πάνω στο στεφάνι του τυμπάνου.

DPA CC 4099, Cello microphone holder for DPA 4099 Cello microphone, black

DPA VC 4099, Violin holder for DPA 4099 microphone, black