MENU
Θα σας ειδοποιήσουμε αμέσως μόλις το προϊόν υπάρχει σε stock στην αποθήκη μας! Η εκτέλεση των παραγγελιών θα γίνει με σειρά προτεραιότητας και δεν εγγυούμαστε ότι η τιμή θα παραμείνει η ίδια.
SPL Phonitor e Red
SKU: APA2020-00949
-
Δωρεάν Μεταφορικά -
36 Δόσεις
-
2 Έτη Εγγύηση
-
Δωρεάν Μεταφορικά
-
36 Δόσεις
-
2 Έτη Εγγύηση
1.425 €
Κατόπιν Παραγγελίας
Ειδοποιήστε με όταν υπάρχει σε απόθεμα
Προσθήκη στο καλάθι
List
All essential functions in a stylish, slim housing.
The Phonitor e offers Phonitor Matrix, volume remote control, connection also for balanced headphones, DA converter option and the all superior VOLTAiR technology.
For all headphones
The Phonitor e offers connections for standard headphones with jack plug and for balanced headphones a 4-pin XLR connector.
Thanks to the high output power, all headphones are driven effortlessly.
Volume with remote control
The volume is adjusted with a milled all-aluminium rotary knob. The Alps RK27 “Big Blue” potentiometer provides a pleasant “spoon in honey” turning feeling.
The volume can be adjusted with any infrared remote control. The Phonitor e learns their commands. To do this, press the IR programming button on the back and then the buttons for louder and softer.
Source selection
A total of five sources can be connected to Phonitor e:
XLR, Cinch, USB, Coax, and Optical
Phonitor e is equipped with RCA connectors and balanced XLR connectors for the analog inputs.
The optional DAC768xs adds three more digital sources: USB, Coax and Optical.
The optional DAC768xs
The converter chip used in the optional digital-to-analog converter is the highly acclaimed AKM AK4490 Velvet Sound™ premium DAC chip, which thanks to its new architecture reproduces the finest sound details.
It converts PCM audio with a resolution of 32 bits and a sampling rate of up to 768kHz, which corresponds to 16 times the CD resolution. Direct Stream Digital is also supported up to a resolution of DSD4 or DSD256.
The Revolution
in the headphone amplifier is the Phonitor Matrix, with switchable crossfeed, thanks to which you can listen to music with headphones as if you are listening to speakers.
The tiring super stereo effect and the exaggerated reproduction of reverberation rooms and effects are a thing of the past.
Enjoy your music without tiring and exactly as it should be heard.
The Phonitor Matrix, in its largest expansion stage, has three adjustment parameters: Crossfeed, Speaker Angle and Center Level.
In Phonitor e the center level is preset to -1 dB and the speaker angle to 30°.
These are the most common values.
The crossfeed function determines the crosstalk of the channels, the so-called interaural level difference. There are two switch positions C1 and C2 for the intensity of the crossfeed.
Specifications:
Analog Inputs: XLR (balanced), RCA
- Maximum input gain: 32.5 dBu
- Input impedance: 20 kΩ
Digital Inputs: DAC768xs (optional)
- Coaxial SPDIF (RCA), PCM sample rates: 44.1/48/88.2/96/176.4/192 kHz
- Optical SPDIF (Toslink F06), PCM sample rates: 44.1/48/88.2/96/with Glass fibre <1m: 176.4/192 kHz
- USB (B), PCM sample rates: 44.1/48/88.2/96/176.4/192/352.8/384/705.6/768 kHz
- USB (B), DSD over PCM (DoP), sample rates: 2.8 (DSD64), 5.6 (DSD128), 11.2 (DSD256) MHz
- 0 dBFS calibrated to: 15 dBu
Balanced Headphones Output: 4-pol XLR (balanced)
- Pin wiring: 1 = L (+), 2 = L (-), 3 = R (+), 4 = R (-)
- Source impedance: 0.36 Ω
- Damping factor (40 Ω): 180
- Frequency range (-3 dB): 10 Hz – 300 kHz
- Crosstalk (1 kHz): -90 dB
- THD + N (10 Hz – 22 kHz, 0 dBu): 0.00091 %
- Noise (A-weighted): -98 dBu
- Output power (1 kHz, 1% THD, 600 Ω): 2 x 8 W
- Output power (1 kHz, 1% THD, 300 Ω): 2 x 3.5 W
- Output power (1 kHz, 1% THD, 32 Ω):2 x 0.7 W
- Dynamic range: 130.5 dBu
Standard Headphones Output: 6.35 mm (1/4") TRS Jack
- Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
- Source impedance: 0.18 Ω
- Damping factor (40 Ω): 180
- Frequency range (-3 dB): 10 Hz – 300 kHz
- Crosstalk (1 kHz): -90 dB
- THD + N (10 Hz – 22 kHz, 0 dBu): 0.00091 %
- Noise (A-weighted): -103 dBu
- Dynamic range: 135.5 dB
- Output power (1 kHz, 1% THD, 600 Ω): 2 x 2.7 W
- Output power (1 kHz, 1% THD, 300 Ω): 2 x 5 W
- Output power (1 kHz, 1% THD, 32 Ω): 2 x 1 W
Internal Linear Power Supply with Shielded Toroidal Transformer
- Operating voltage for analog audio: +/- 60 V
- Operating voltage for relays and LEDs: + 12 V
- Operating voltage for optional DAC768xs: +7 V, +3.3 V
Netzteil
- Mains voltage (selectable, see fuse chamber): 230 V AC / 50; 115 V AC / 60 Hz
- Fuse for 230 V: T 500 mA
- Fuse for 115 V: T 1 mA
- Power consumption: max. 40 VA
- Stand-by power consumption: < 0.3 W
Dimensions & Weight
- W x H x D (width x height incl. feet x depth): 278 x 100 x 300 mm
- Unit weight: 3.8 kg
- Shipping weight (incl. packaging): 5 kg
Γράψτε τη δική σας αξιολόγηση
Πως βαθμολογείτε αυτό το προϊόν;
Ακολουθήστε μας στα Social Media
Μην χάσετε τα νέα προϊόντα και events του Athens Pro Audio.
Ειδοποίηση Αποθέματος
SPL Phonitor e Red
