Καλώδια Μικροφώνων

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Στερεοφωνικό καλώδιο υψηλής ποιότητας XLR-XLR κλάσης Β, 5.0 mΤα καλώδια της σειράς d+ Class B προσφέρουν τον τέλειο συνδυασμό υψηλής ποιότητας και όμορφου σχεδιασμού. Συνδέοντας τα επάνω σε εξοπλισμό DJ όπως CDJ, Traktor και Serato, κάρτα ήχου, ηχείο, μίκτη, συνθεσάιζερ και σε άλλα μηχανήματα, έχετε αυτομάτως ένα τεράστιο πλεονέκτημα στην ποιότητα του ήχουΌσον αφορά στον σχεδιασμό τους ,η σειρά d + Class B έχει πετύχει το τέλειο “πάντρεμα” δομής και υλικού, δίνοντας ιδιαίτερη προσοχή στην μόνωση, την θωράκιση, το εξωτερικό περίβλημα και τα βύσματα.Ο αγωγός των καλωδίων της σειράς d+ class B είναι από 18 AWG pure oxygen free copper, που αποτρέπει την απώλεια σήματος και μεταφέρει την πληροφορία σας μεταξύ συστημάτων ατόφια. Το πλατύ σε σχήμα καλώδιο αποτρέπει τα τσακίσματα που μπορεί να προκαλέσουν απώλεια σήματος, και προστατεύει το σήμα από εξωτερικό / εσωτερικό θόρυβο και ηλεκτρο-μαγνητικά κύματα.Το μαλακό εξωτερικό περίβλημα από PVC και ο ειδικός σχεδιασμός του εξασφαλίζουν μακροχρόνια χρήση.Η σειρά d+ class B παρέχει παρόμοια ποιότητα με hi-end καλώδια ήχου αλλά σε πολύ πιο προσιτή τιμή.

Στερεοφωνικό καλώδιο υψηλής ποιότητας XLR-XLR κλάσης Β, 3.0 mΤα καλώδια της σειράς d+ Class B προσφέρουν τον τέλειο συνδυασμό υψηλής ποιότητας και όμορφου σχεδιασμού. Συνδέοντας τα επάνω σε εξοπλισμό DJ όπως CDJ, Traktor και Serato, κάρτα ήχου, ηχείο, μίκτη, συνθεσάιζερ και σε άλλα μηχανήματα, έχετε αυτομάτως ένα τεράστιο πλεονέκτημα στην ποιότητα του ήχουΌσον αφορά στον σχεδιασμό τους ,η σειρά d + Class B έχει πετύχει το τέλειο “πάντρεμα” δομής και υλικού, δίνοντας ιδιαίτερη προσοχή στην μόνωση, την θωράκιση, το εξωτερικό περίβλημα και τα βύσματα.Ο αγωγός των καλωδίων της σειράς d+ class B είναι από 18 AWG pure oxygen free copper, που αποτρέπει την απώλεια σήματος και μεταφέρει την πληροφορία σας μεταξύ συστημάτων ατόφια. Το πλατύ σε σχήμα καλώδιο αποτρέπει τα τσακίσματα που μπορεί να προκαλέσουν απώλεια σήματος, και προστατεύει το σήμα από εξωτερικό / εσωτερικό θόρυβο και ηλεκτρο-μαγνητικά κύματα.Το μαλακό εξωτερικό περίβλημα από PVC και ο ειδικός σχεδιασμός του εξασφαλίζουν μακροχρόνια χρήση.Η σειρά d+ class B παρέχει παρόμοια ποιότητα με hi-end καλώδια ήχου αλλά σε πολύ πιο προσιτή τιμή.

Στερεοφωνικό καλώδιο υψηλής ποιότητας XLR-XLR κλάσης Β ,2.0 mΤα καλώδια της σειράς d+ Class B προσφέρουν τον τέλειο συνδυασμό υψηλής ποιότητας και όμορφου σχεδιασμού. Συνδέοντας τα επάνω σε εξοπλισμό DJ όπως CDJ, Traktor και Serato, κάρτα ήχου, ηχείο, μίκτη, συνθεσάιζερ και σε άλλα μηχανήματα, έχετε αυτομάτως ένα τεράστιο πλεονέκτημα στην ποιότητα του ήχουΌσον αφορά στον σχεδιασμό τους ,η σειρά d + Class B έχει πετύχει το τέλειο “πάντρεμα” δομής και υλικού, δίνοντας ιδιαίτερη προσοχή στην μόνωση, την θωράκιση, το εξωτερικό περίβλημα και τα βύσματα.Ο αγωγός των καλωδίων της σειράς d+ class B είναι από 18 AWG pure oxygen free copper, που αποτρέπει την απώλεια σήματος και μεταφέρει την πληροφορία σας μεταξύ συστημάτων ατόφια. Το πλατύ σε σχήμα καλώδιο αποτρέπει τα τσακίσματα που μπορεί να προκαλέσουν απώλεια σήματος, και προστατεύει το σήμα από εξωτερικό / εσωτερικό θόρυβο και ηλεκτρο-μαγνητικά κύματα.Το μαλακό εξωτερικό περίβλημα από PVC και ο ειδικός σχεδιασμός του εξασφαλίζουν μακροχρόνια χρήση.Η σειρά d+ class B παρέχει παρόμοια ποιότητα με hi-end καλώδια ήχου αλλά σε πολύ πιο προσιτή τιμή.

Καλώδιο μικροφώνου 5m Mogami 2534 τερματισμένο με επίχρυσους connectors της Neutrik, από την ίδια την Mogami στην Ιαπωνία.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Grimm Audio TPR ‘Twisted Pair Reference’ cables are developed with physics in mind. Their design focuses on high RF immunity and low microphonics. The perfect symmetry of the cross-section and heavy shielding contribute to high RF immunity. Low microphonics is provided by a special interface layer under the shield and other construction details.

XLR male - σε - XLR female -  10 μέτρα

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Pro Series - Studio & Live XLR Female to TRS Male 6' (1.8 meters)

Pro Series - Studio & Live XLR Female to TRS Male 3' (0.9 meters)

Pro Series - Studio & Live XLR Cable 50' (15.2 meters)

Pro Series - Studio & Live XLR Cable 25' (7.6 meters)

Pro Series - Studio & Live XLR Cable 20' (6.1 meters)

Pro Series - Studio & Live XLR Cable 15' (4.6 meters)

Pro Series - Studio & Live XLR Cable 10' (3.0 meters)

Pro Series - Studio & Live XLR Cable 6' (1.8 meters)

Pro Series - Studio & Live XLR Cable 3' (0.9 meters)

Καλώδιο μικροφώνου XLR-XLR , 3 μέτρων

Καλώδιο μικροφώνου XLR-XLR , 2 μέτρων

Κορυφαίο balanced Mic/Line καλώδιο Mogami MOD. 2549-00 3m.  με εξαιρετικής ποιότητας θωράκιση συνδυασμένη με πολύ χαμηλή χωρητικότητα.Η χωρητικότητα μεταξύ των αγωγών Hot και Cold είναι ίση με 11 pF/m (πολύ χαμηλότερη από τη συντριπτική πλειοψηφία των μικροφωνικών - line καλωδίων), ενώ η χωρητικότητα μεταξύ του κάθε αγωγού και της γείωσης είναι ίση με 76 pF/m. Χρησιμοποιούνται καλώδια Mogami  και στόν τερματισμό του χρησιμοποιούνται επίχρυσα βύσματα της Neutrik.                                 

Κορυφαίο balanced Mic/Line καλώδιο Mogami MOD. 2549-00 5m.  με εξαιρετικής ποιότητας θωράκιση συνδυασμένη με πολύ χαμηλή χωρητικότητα.Η χωρητικότητα μεταξύ των αγωγών Hot και Cold είναι ίση με 11 pF/m (πολύ χαμηλότερη από τη συντριπτική πλειοψηφία των μικροφωνικών - line καλωδίων), ενώ η χωρητικότητα μεταξύ του κάθε αγωγού και της γείωσης είναι ίση με 76 pF/m. Χρησιμοποιούνται καλώδια Mogami  και στόν τερματισμό του χρησιμοποιούνται επίχρυσα βύσματα της Neutrik.                                 

Κορυφαίο balanced Mic/Line καλώδιο Mogami MOD. 2549-00 1m.  με εξαιρετικής ποιότητας θωράκιση συνδυασμένη με πολύ χαμηλή χωρητικότητα.Η χωρητικότητα μεταξύ των αγωγών Hot και Cold είναι ίση με 11 pF/m (πολύ χαμηλότερη από τη συντριπτική πλειοψηφία των μικροφωνικών - line καλωδίων), ενώ η χωρητικότητα μεταξύ του κάθε αγωγού και της γείωσης είναι ίση με 76 pF/m. Χρησιμοποιούνται καλώδια Mogami  και στόν τερματισμό του χρησιμοποιούνται επίχρυσα βύσματα της Neutrik.                 

Καλώδιο μικροφώνου XLR-XLR μήκους 0,5 μέτρων

Καλώδιο μικροφώνου XLR-XLR, μήκους 10 μέτρων.

Καλώδιο μικροφώνου XLR-XLR, μήκους 15 μέτρων.

Καλώδιο μικροφώνου XLR-XLR, μήκους 20 μέτρων.

Καλώδιο μικροφώνου XLR-XLR, μήκους 5 μέτρων.

Καλώδιο μικροφώνου XLR-XLR, μήκους 3 μέτρων.

Καλώδιο μικροφώνου XLR-XLR Neutrik, 1 μέτρου

Καλώδιο Jack Stereo Male 6.3mm – XLR Female με βύσματα Neutrik και καλώδιο Cordial CMX222 με διάσταση 5m.

Καλώδιο XLR M – XLR F με βύσματα Neutrik και καλώδιο Cordial CMFLEX 222 με διάσταση 1,5m.

Καλώδιο XLR M – XLR F με βύσματα Neutrik και καλώδιο Cordial CMFLEX 222 με διάσταση 5m.

Καλώδιο XLR M – XLR F σε Λευκό χρώμα με βύσματα Neutrik και καλώδιο Cordial White με διάσταση 2.5m.

Καλώδιο XLR M – XLR F με βύσματα Neutrik και καλώδιο Cordial με υφασμάτινη επένδυση με διάσταση 5m.

Καλώδιο Jack Stereo Male 6.3mm – XLR Female με βύσματα Neutrik και καλώδιο Cordial CMX222 με διάσταση 2.50m.

Καλώδιο μικροφώνου με μεταλλικά βύσματα  XLR-RFV -XLR-3MV ( αρσενικό - θυληκό ) , 5 μέτρων .

Καλώδιο XLR M – XLR F με βύσματα Neutrik και καλώδιο Cordial CMFLEX 222 με διάσταση 3m.

Καλώδιο μικροφώνου με μεταλλικά βύσματα 1XLR3M->1XLR3F , 3 μέτρων .

Καλώδιο, XLR αρσενικό σε XLR θηλυκό, 1 μέτρο.

Καλώδιο, XLR αρσενικό σε XLR θηλυκό, 2 μέτρα.

Καλώδιο, XLR αρσενικό σε XLR θηλυκό, 10 μέτρα.

Καλώδιο, XLR αρσενικό σε XLR θηλυκό, 3 μέτρα.