Πικάπ
Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net
Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net
Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net
Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net
Δομικά, το X2 υποστηρίζεται από τη μεγάλη, βαριά, πυκνή και άκαμπτη δομή MDF, μειώνοντας τους ανεπιθύμητους συντονισμούς σε σχεδόν ανεπαίσθητα επίπεδα. Με την προσθήκη αυτής της επιπλέον μάζας, το X2 είναι ακόμη πιο αθόρυβο, επιτρέποντας την αναπαραγωγή του βινυλίου να γίνει πιο λεπτομερής και ακριβής. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net
Quartz-Controlled HiFi Πικάπ με high torque, Brushless Direct Drive DC Motor, Static-balanced S shaped βραχίονας με VTA προσαρμογή και κόκκινη Ortofon 2M κεφαλή. Διαθέτει υψηλής ποιότητας Phono και επίχρυσες εξόδους ήχου. Χαρακτηριστικά: Πικάπ: Type: Direct Drive Manual Turntable System Drive: Quartz driven upper-torque direct drive Motor: 16pole, 3phase, brushless DC motor Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm) Starting Torque: 4500 g/cm Start-up time / rpm change: less than 0.2 sec. Wow and flutter: 0.01% WRMS S/N Ratio: More than 55dB (DIN-B) Brake system: electronic brake Βραχίονας: Type: Universal Static Balanced S-Shaped Effective Length: 230mm Overhang: 15mm Tracking Error Angle: Less than 3 degree Adjustable Tonearm Base (VTA): 0-6 mm Applicable Cartridge Weight: 3.5~8.5g (including headshell is 13~18g) Anti-Skating Range: 0 – 3g Effective tonearm mass: 30g Turntable Platter: Material: aluminium die-cast Diameter: 332mm Weight: About 1.8kg (including rubber mat) Terminals: 1x PHONO Out (gold-plated) 1x GND Earth Terminal Παρελκόμενα συσκευασίας:Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable with earth lead, AC power supply cord, Rubber Mat, Instruction Manual, Ortofon 2M Red cartridge & headshell Τροφοδοσία: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)Κατανάλωση: 9WΔιαστάσεις WxDxH: 458 x 368.3 x 162.4 mmΒάρος: 12.8kg
Το ποιό θρυλικό πικάπ της Rega, πολυβραβευμένου πέντε φορές από το ειδικό περιοδικό What Hi-Fi και προϊόν της χρονιάς (RP3) δεν επρόκειτο ποτέ να είναι ένας εύκολος στόχος για τους ανταγωνιστές μας. Χρειάστηκε μια ομάδα σχεδιαστές με επικεφαλής τον Roy Gandy και δύο χρόνια για να αναπτύξει το ολοκαίνουριο «Rega 3» με νέο σχεδιασμό. Η ομάδα μας έχει εργαστεί ακούραστα για να βελτιώσει κάθε πτυχή αυτού του πικάπ που προσφέρει βελτιωμένη εργονομία, χρηστικότητα και πρώτα απ 'όλα, ηχητικό performance. Το νέο σας προσφέρει νέο επίπεδο στην ακρόαση.Είναι πραγματικά μια νέα προσέγγιση για πικάπ του 2017Το πικάπ έρχεται χωρίς κεφαλή, επικοινωνήστε μαζί μας για να σας προτείνουμε κεφαλές που ταιριάζουν Χαρακτηριστικά:Πικάπ χειροποίητης κατασκευήςΤεχνολογία Πλατό – Υποπλατό με σύστημα Double Brace για μηδενικούς συντονισμούςΣύγχρονο μοτέρ AC 24V ψυχόμενο και νέα πλακέτα PCB υψηλών προδιαγραφών χαμηλού θορύβουPulley αλουμινίου για μηδενικό θόρυβο και καλύτερη ακρίβεια στροφώνΕιδικό πηγάδι μηδενικών ανοχών (new patent) Φ 11mmΧειροκίνητη επιλογή ταχυτήτων 33 1/3 rpm, 45 rpmΠλατό βελτιωμένης ακριβείας τύπου float glass ‘Optiwhite’ πάχους 12mmΧειροποίητος βραχίονας RB330 μηδενικών τριβών (new patent)Προστατευτικό καπάκι από διάφανο plexiglassΝέου τύπου στήριξη 3 σημείων για τέλεια ηχητική απομόνωσηΕργονομικός διακόπτης On/Off κάτω από το πικάπΔιαθέσιμα φινιρίσματα: Black Gloss, White GlossΔιαστάσεις (W x H x D): 450.0 mm x 117.0 mm x 360.0 mmΒάρος: 7 kg
Το DEBUT πρωτοεμφανίστηκε στα τέλη των 90's.Για πρώτη φορά, μετά την είσοδο του Cd στην ζωή μας, παρουσιάστηκε ένα πικ-απ υψηλής ποιότητας που μπορούσαν όλοι οι μουσικόφιλοι να αγοράσουν. Το ΝΕΟ Debut Carbon DC αποτελεί την συνέχιση της παράδοσης του τότε μοντέλου με προδιαγραφές και υλικά του σήμερα. Βραχίονας από ανθακονήματα για αυξημένη ακαμψία και απόσβεση στους ανεπιθύμητους συντονισμούς. Αύξηση της μάζας του πλατό για σταθερότερη περιστροφή. AC κινητήρας χαμηλού θορύβου και speed box με επιλογέα 33/45 και δυνατότητα για 78 στοφές με τροφοδοτικό DC για μείωση των ανεπιθύμητων δονήσεων. Το καπάκι συμπεριλαμβάνεται. Προδιαγραφές:Lifestyle for vinyl fans 8,6” carbon tonearm Heavy non resonant acrylic platter New DC power supply with ultra precision frequency DCdriven AC generator (like Speed Box) for ultimate speed stability Precision belt drive with synchronous motor New TPE motor suspension Magnetic cartridge 2M red from Ortofon Χαρακτηριστικά:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm acrylic platterMains bearing : stainless steelWow & flutter : +/- 0,10%Speed drift : +/- 0,80%Signal to noise : - 68dBTonearm : 8,6”, CarbonEffective arm length : 218,5 mmEffective arm mass : 6,0 gOverhang : 18,5mmTracking force : 10 - 30mNIncluded accessories : RCA cable, lidPower connection : 110/120 or 230/240 Volt - 50 or 60 HzDimensions : 415 x 118 x 320mm (WxHxD) lid closed / Weight : 5,6 kg netCartridge : Ortofon 2Mred
Cut the cord, keep the vinyl. The AT-LP60XBT gives you all the great features of the redesigned AT-LP60X fully automatic belt-drive stereo turntable with the added convenience of Bluetooth® wireless connectivity. So you can set up your turntable in one room and listen to it in another without having to run a bunch of cables. The turntable pairs with speakers, headphones or other wireless devices. With its CSR BT chipset, the turntable is even able to connect to devices that support the aptX codec, which offers much-improved sound quality over the standard SBC codec. Of course, the AT-LP60XBT can also be operated just like a regular turntable with a traditional wired connection. Either way – wired or wireless – you get outstanding audio with the ease of automatic operation controlled by front-panel start, stop and tonearm lift buttons. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup. The AT-LP60XBT plays both 33-1/3 and 45 RPM records and comes with a 45 RPM adapter, a detachable dual RCA output cable (for wired connection) and a removable hinged dust cover. The turntable is available in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black (AT-LP60XBT-RD). * The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners. Features : High-fidelity audio with Bluetooth wireless technology Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable Compatible with aptX codec Fully automatic operation with two speeds: 33-1/3 and 45 RPM Anti-resonance, die-cast aluminum platter Redesigned tonearm base and headshell for improved tracking and reduced resonance Integral Dual Moving Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L) AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain Built-in switchable phono pre-amplifier for phono- or line-level output Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover Available in black (AT-LP60XBT-BK), white/black (AT-LP60XBT-WH), and red/black (AT-LP60XBT-RD) Specifications : Type Belt drive turntable, fully automatic Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable Platter Aluminum Wow and Flutter Less than 0.25% (WTD) @ 3 kHz Signal-to-Noise Ratio >50 dB (DIN-B) Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized Power Supply Requirements 100 to 240V, 50/60 Hz,0.6 A Max. Power Consumption 1.5 W Dimensions 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D Weight 2.6 kg (5.73 lbs.) Accessories Included Dust cover, felt mat, platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9')) AC adapter: 12 V, 2 A Replacement Stylus: ATN3600L Communication System: Bluetooth Version 5.0 Maximum Communication Range: Line of sight - approx. 10 m (33') Compatible Bluetooth Profile: A2DP Support Codec: SBC, Qualcomm aptX
AT-LP60XUSBFully Automatic Belt-Drive Turntable (Analog & USB) Experience high-fidelity audio of vinyl & convert records to digital files Fully automatic belt-drive turntable with two speeds: 33-1/3, 45 RPM Built-in switchable phono pre-amplifier for phono- or line-level output Improved tracking and reduced resonance for smoother sound Integral Dual Magnet™ phono cartridge with replaceable diamond stylus Free download of the Mac & PC compatible Audacity recording software AudioTechnicaAT-LP120X-USBBlack Specifications: Drive Method Belt-drive Type fully automatic Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM Turntable Platter Aluminium Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS) Signal-to-Noise Ratio >50 dB (DIN-B) Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 1 W Dimensions 359.5 mm x 97.5 mm x 373.3 mm Weight 2.6 kg Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable 45 RPM adapter Removable hinged dust cover 1.9 m (6.2') USB cable Cartridge & Stylus Replacement Stylus ATN3600L
AT-LP120XManual Direct-Drive Turntable (Analogue & USB) Direct-drive, DC servo motor Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Convert records to digital files via the USB output Professional anti-resonance, die-cast aluminium platter with felt mat Specifications: Type fully manual Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch Variation +/-8% or +/-16% Turntable Platter Die-cast aluminum Starting Torque >1.0 kgf.cm Braking System Electronic brake Wow and Flutter 50 dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 2.75 W Dimensions 141,6 x 452 x 352 (H x W x D mm) Weight 8.0kg Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter Cartridge & Stylus Replacement Stylus VM95 Series
AT-LP120XManual Direct-Drive Turntable (Analogue & USB) Direct-drive, DC servo motor Fully manual operation Adjustable dynamic anti-skate control Selectable 33/45/78 RPM speeds Convert records to digital files via the USB output Professional anti-resonance, die-cast aluminium platter with felt mat Specifications: Type fully manual Motor DC servo-controlled Speeds 33-1/3 RPM, 45 RPM, 78 RPM Pitch Variation +/-8% or +/-16% Turntable Platter Die-cast aluminum Starting Torque >1.0 kgf.cm Braking System Electronic brake Wow and Flutter 50 dB Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec Phono Pre-Amp Gain 36 dB nominal, RIAA equalized USB Function PC or Mac with an available USB port (USB1.1 or higher) Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above Power Supply Requirements 115/230V AC, 60/50 Hz Power Consumption 2.75 W Dimensions 141,6 x 452 x 352 (H x W x D mm) Weight 8.0kg Accessories Included AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter Cartridge & Stylus Replacement Stylus VM95 Series
The Planar 6 has one goal, to reproduce your vinyl as accurately as possible. We have engineered every aspect of this turntable to extract as much detail from the vinyl surface as possible. Advanced materials and engineering solutions have been used throughout the design to ensure the greatest level of performance.The Neo PSU offers electronic speed change, advanced anti-vibration control and user adjustable electronic fine speed adjustment only found on the RP10 until now. See 'product details' tab below for full information. The Planar 6 will be available with the recommended *Ania MC factory fitted as an attractive package. The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim. The Planar 6 now benefits from a single piece, machined aluminum sub-platter, a new 24v motor hand tuned and matched to its own NEO power supply and custom drive pulley fitted with our upgrade drive belt as standard. The Neo PSU uses the RP10 DSP (digital signal processing) generator built upon a high stability crystal. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed. The DSP generator will also produce a near perfect sinusoidal waveform to drive the motor. This, along with an efficient drive amplifier, generates a 24V AC balanced signal of less than 0.15% distortion, which is completely un-affected by any changes in the mains/line voltage and conditions. This then drives the turntables anti-vibration circuit, which is situated beneath the turntable. Key Features: NEO power supply. Super lightweight foam core plinth. Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin. Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim. Upgrade white drive belt fitted as standard. Custom dual layer smoked / clear float glass platter. Single piece aluminium sub platter. Custom machined high precision drive pulley. Patent pending, ultra-low friction central brass hub. Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy. RB330 handmade precision tonearm with custom stainless weight. New high spec Rega 24v low noise synchronous motor – each motor matched by hand to its own NEO PSU ensuring optimum anti-vibration control. New smoked dust cover. New aluminium foot trims and Planar style feet. Dimensions Turntable Width 448mm Depth 365mm Height 120mm (Dustcover closed) Weight 5.2kg Dimensions Neo PSU Width 180mm Depth 155m Height 50mm Weight 0.6Kg
Το ποιό θρυλικό πικάπ της Rega, πολυβραβευμένου πέντε φορές από το ειδικό περιοδικό What Hi-Fi και προϊόν της χρονιάς (RP3) δεν επρόκειτο ποτέ να είναι ένας εύκολος στόχος για τους ανταγωνιστές μας. Χρειάστηκε μια ομάδα σχεδιαστές με επικεφαλής τον Roy Gandy και δύο χρόνια για να αναπτύξει το ολοκαίνουριο «Rega 3» με νέο σχεδιασμό. Η ομάδα μας έχει εργαστεί ακούραστα για να βελτιώσει κάθε πτυχή αυτού του πικάπ που προσφέρει βελτιωμένη εργονομία, χρηστικότητα και πρώτα απ 'όλα, ηχητικό performance. Το νέο σας προσφέρει νέο επίπεδο στην ακρόαση.Είναι πραγματικά μια νέα προσέγγιση για πικάπ του 2017Το πικάπ έρχεται χωρίς κεφαλή, επικοινωνήστε μαζί μας για να σας προτείνουμε κεφαλές που ταιριάζουν Χαρακτηριστικά:Πικάπ χειροποίητης κατασκευήςΤεχνολογία Πλατό – Υποπλατό με σύστημα Double Brace για μηδενικούς συντονισμούςΣύγχρονο μοτέρ AC 24V ψυχόμενο και νέα πλακέτα PCB υψηλών προδιαγραφών χαμηλού θορύβουPulley αλουμινίου για μηδενικό θόρυβο και καλύτερη ακρίβεια στροφώνΕιδικό πηγάδι μηδενικών ανοχών (new patent) Φ 11mmΧειροκίνητη επιλογή ταχυτήτων 33 1/3 rpm, 45 rpmΠλατό βελτιωμένης ακριβείας τύπου float glass ‘Optiwhite’ πάχους 12mmΧειροποίητος βραχίονας RB330 μηδενικών τριβών (new patent)Προστατευτικό καπάκι από διάφανο plexiglassΝέου τύπου στήριξη 3 σημείων για τέλεια ηχητική απομόνωσηΕργονομικός διακόπτης On/Off κάτω από το πικάπΔιαθέσιμα φινιρίσματα: Black Gloss, White GlossΔιαστάσεις (W x H x D): 450.0 mm x 117.0 mm x 360.0 mmΒάρος: 7 kg
Με τη στιβαρή, εκλεπτυσμένη σχεδίασή του και τον επανα-σχεδιασμένο βραχίονα με αυτόματη ανύψωση και σταμάτημα αναπαραγωγής, το DP-400 της Denon αναπαράγει αγαπημένα άλμπουμ, πιστά στην αυθεντική εγγραφή. Ξανα-ανακαλύψτε το πάθος σας για το βινύλιο με το Hi-Fi πικάπ DP-400 της Denon με αυτόματο αισθητήρα ταχύτητας για ακριβή αναπαραγωγή ήχου. Στιβαρή κατασκευή και κομψός σχεδιασμός συνδυάζονται αρμονικά με την υφιστάμενη Denon Design Series. Ο καμπύλος βραχίονας Σχήματος-S ανυψώνεται αυτόματα και σταματά το πλατό, όταν ο δίσκος βινυλίου φτάνει στο τέλος αναπαραγωγής. Το ζυγοσταθμισμένο, κινούμενο-με-ιμάντα πλατό υποστηρίζει δίσκους 33 1/3 rpm, 45 rpm ή 78 rpm με ακρίβεια, αντάξια της αυθεντικής εγγραφής. Ενσωματωμένος ισοσταθμιστής κεφαλής πικάπ δημιουργεί μία ανοιχτή, περιβάλλουσα ηχητική βαθμίδα για τα αγαπημένα σας άλμπουμ με λεπτομερή και ακριβή αναπαραγωγή. Περιλαμβάνει κεφαλή MM. Αποκλειστικό, αφαιρούμενο κάλυμμα σκόνης μπορεί να χρησιμοποιηθεί και ως βάση παρουσίασης. Ειδικά Σχεδιασμένος Βραχίονας Σχήματος-S Διαθέτει προσεκτικά σχεδιασμένο καμπύλο βραχίονα Σχήματος-S με βελτιστοποιημένη γωνία ανάγνωσης της αυλάκωσης του δίσκου σε οποιοδήποτε σημείο του δίσκου, αυτόματη ανύψωση στο τέλος των δίσκων και σταμάτημα αναπαραγωγής. Όταν ο δίσκος βινυλίου φτάνει στο τέλος της αναπαραγωγής, ο βραχίονας ανυψώνεται αυτόματα, διατηρώντας την άριστη κατάσταση του άλμπουμ σας και της κεφαλής σας. Η σχεδίαση του καμπύλου βραχίονα Σχήματος-S μειώνει, επίσης, την αρμονική παραμόρφωση, διασφαλίζοντας κρυστάλλινα καθαρά ηχητικά σήματα κάθε φορά που ακούτε. Στιβαρή Κατασκευή Η στιβαρή κατασκευή έχει την απαραίτητη αντοχή καθώς και την απαιτούμενη υψηλή-πυκνότητα για να αναπαραγάγει τη μουσική με όλες τις λεπτομέρειες, χωρίς συντονισμούς. Τα χοντρά τοιχώματα του περιβλήματος και το ζυγοσταθμισμένο πλατό παρέχουν τη βέλτιστη επιφάνεια για τη δική σας συλλογή δίσκων βινυλίου, μειώνοντας εξωτερικούς κραδασμούς. Συνδυάστε το DP-400 με την υπόλοιπη Denon Design Series για ένα ολοκληρωμένο σύστημα υψηλής-ποιότητας. Επιλογέας Ταχύτητας Υποστηρίζει αναπαραγωγή στις 33 1/3 rpm, 45 rpm και 78 rpm. Παίξτε εύκολα όλη σας τη συλλογή δίσκων βινυλίου και απολαύστε τη σε όλο της το εύρος — ακόμα και τα αγαπημένα σας, τα παλιά 78-άρια. Εύκολη Ρύθμιση και Χειρισμός Χρειάζονται λίγα λεπτά για να το αποσυσκευάσετε και να το λειτουργήσετε. Αυτό αφορά τόσο τους αρχάριους όσο και τους έμπειρους οπαδούς του βινυλίου. Συνδέστε το DP-400 με τον αγαπημένο σας ενισχυτή ή σύστημα, συμπεριλαμβανομένης της Denon Design Series, κι αμέσως επανα-συνδεθείτε με τη συλλογή σας δίσκων βινυλίου — είναι τόσο απλό. Αποκλειστικό, Αφαιρούμενο Διπλού-σκοπού Κάλυμμα Σκόνης Το αφαιρούμενο κάλυμμα σκόνης έχει μοντέρνο σχεδιασμό, αναβαθμίζοντας τη συνολική αισθητική του DP-400, ενώ ταυτόχρονα καταστέλλει κραδασμούς που επηρεάζουν την ποιότητα της μουσικής που έχει να κάνει με τα προσαρμοσμένα καλύμματα. Λειτουργώντας ως βάση παρουσίασης για το κάλυμμα του άλμπουμ σας, τοποθετήστε το κάλυμμα σκόνης όρθιο στη συμπεριλαμβανόμενη βάση και δείξτε το με υπερηφάνεια σε φίλους και μέλη της οικογένειας. Ισοσταθμιστής Κεφαλής Πικάπ Ο ενσωματωμένος ισοσταθμιστής κεφαλής πικάπ δημιουργεί μία ανοιχτή, περιβάλλουσα ηχητική βαθμίδα που δίνει ζωή στην αγαπημένη σας συλλογή δίσκων βινυλίου, ενώ παραμένει πιστή με την αυθεντική εγγραφή, όπως ο καλλιτέχνης σκόπευε να ακούγεται. Συνδέστε το απ’ ευθείας σε mini συσκευή ή ολοκληρωμένο ενισχυτή για αδιάλειπτη χρήση. Επιλογές Κεφαλής Διατίθεται με κεφαλή MM για ακριβέστερη ακρόαση και πρόσθετες μουσικές λεπτομέρειες. Ως κατασκευαστής της διαχρονικότερης-προς-πώληση στην αγορά κεφαλής, απολαύστε το πικάπ DP-400 της Denon με εμπιστοσύνη. Αν επιθυμείτε ακρόαση μέσω κεφαλής MC, αλλάξτε εύκολα την υφιστάμενη κεφαλή MM, ώστε να ταιριάζει με τις ηχητικές προτιμήσεις. Απολαύστε τη μνημειώδη ποιότητα ήχου της Denon, με οποιονδήποτε τρόπο επιλέξετε να ακούσετε. Ζυγοσταθμισμένο, Οδηγούμενο-με-ιμάντα Πλατό με Αυτόματο Αισθητήρα Ενσωματωμένος αυτόματος αισθητήρας ελέγχει το πλατό με ακρίβεια, αποτρέποντας ανεπιθύμητες αυξομειώσεις στην ταχύτητα κατά την αναπαραγωγή — απολαύστε αναπαραγωγή ήχου ακριβώς όπως ο καλλιτέχνης σκόπευε. Κομψό Μέγεθος Με πλάτος 41 cm, το DP-400 είναι κατασκευασμένο ώστε να ταιριάζει αρμονικά με το υφιστάμενος Hi-Fi σύστημά σας. Παρά το κομψό μέγεθος, εξακολουθεί να παρέχει τον δυναμικό, λεπτομερειακό ήχο που θα αναμένατε από την Denon. Εκλεπτυσμένη Αισθητική της Denon Design Series Συνδυαζόμενο αρμονικά με τη δημοφιλή Denon Design Series, το DP-400 διαθέτει εκλεπτυσμένη μορφή και στιβαρή κατασκευή. Ανθεκτικά υλικά αλουμινίου προσφέρουν μοντέρνα αισθητική. Συνδυάστε το με την υπόλοιπη Denon Design Series για να συμπληρώσετε το κομψά σχεδιασμένο Hi-Fi σύστημά σας. 100+ Χρόνια Γεμάτα Πρωτιές στην Τεχνολογία Ήχου Ιδρυθείσα το 1910, η Denon φέρει μια βαριά κληρονομιά “πρωτιών” στην τεχνολογία ήχου — από τον πρώτο κατασκευαστή ηλεκτρονικών ηχητικών συσκευών της Ιαπωνίας, μέχρι την παραγωγή των πρώτων εμπορικών CDs στον κόσμο. Αυτή η εστιασμένη επένδυση στην Έρευνα & Ανάπτυξη στον τομέα του ήχου σας εξασφαλίζει την πιο σύγχρονη τεχνολογία και την υψηλότερη ποιότητα με κάθε εμπειρία ακρόασης.Weight in kg : 5.8 (w/ Dust cover)
Το DEBUT πρωτοεμφανίστηκε στα τέλη των 90's.Για πρώτη φορά, μετά την είσοδο του Cd στην ζωή μας, παρουσιάστηκε ένα πικ-απ υψηλής ποιότητας που μπορούσαν όλοι οι μουσικόφιλοι να αγοράσουν. Το ΝΕΟ Debut Carbon DC αποτελεί την συνέχιση της παράδοσης του τότε μοντέλου με προδιαγραφές και υλικά του σήμερα. Βραχίονας από ανθακονήματα για αυξημένη ακαμψία και απόσβεση στους ανεπιθύμητους συντονισμούς. Αύξηση της μάζας του πλατό για σταθερότερη περιστροφή. AC κινητήρας χαμηλού θορύβου και speed box με επιλογέα 33/45 και δυνατότητα για 78 στοφές με τροφοδοτικό DC για μείωση των ανεπιθύμητων δονήσεων. Το καπάκι συμπεριλαμβάνεται. Προδιαγραφές:Lifestyle for vinyl fans 8,6” carbon tonearm Heavy non resonant acrylic platter New DC power supply with ultra precision frequency DCdriven AC generator (like Speed Box) for ultimate speed stability Precision belt drive with synchronous motor New TPE motor suspension Magnetic cartridge 2M red from Ortofon Χαρακτηριστικά:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm acrylic platterMains bearing : stainless steelWow & flutter : +/- 0,10%Speed drift : +/- 0,80%Signal to noise : - 68dBTonearm : 8,6”, CarbonEffective arm length : 218,5 mmEffective arm mass : 6,0 gOverhang : 18,5mmTracking force : 10 - 30mNIncluded accessories : RCA cable, lidPower connection : 110/120 or 230/240 Volt - 50 or 60 HzDimensions : 415 x 118 x 320mm (WxHxD) lid closed / Weight : 5,6 kg netCartridge : Ortofon 2Mred
Semi-automatic turntable with electronical stop-function. Succeed from the „big brother“, the CS 550, it has the same massive wooden chassis (but in black colour only), motor unit and bearing. Approved configuration also on the tonearm – it ist he arm of the CS 505-4.Tonearm technology:Cardan bearing with massless stylus force set by a high-precision torsion spring. Rigid headshell made of carbon fiber with ½-inch fixing-holes. Adjustable tracking force and anti-skating. Viscosity damped tonearm lift.Chassis technology:Vibration damping solid wood chassis. Vibration damped aluminium platter with anti-static, thick felt mat.Drive technology:Belt driven by a precision flat belt. DC motor with electronic speed control. Special hardened 7mm axle. Cartridge Ortofon OM 10 is included.Χαρακτηριστικά:Speed r/min.: 33/45Speed accuracy: 0,06%Rumple unweightet signal-to-noise ratio: 48dBRumple weighted signal-to-noise: 72dBCartridge system: Orotofon OM 10Frequency Response: 22 Hz - 22 kHzConnectors: 1 x RCA Stereo Socket, 1 x Ground SocketDimensions (BxHxT): 440x112x370 mmWeight: 6,7kgColour: BlackPower supply: 12 V DCCartridge Ortofon OM 10 is included.
Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity.The stiffness is important to be a super rigid base for the tonearm/cartridge and bearing/platter as there must be 100 % no moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter / bearing is directed in the TPE columns. On opposite the TPE avoid that any unwanted energie of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge.The bearing is an oversized inverted with a inert, resonance free ceramic ball on top Around the bearing we set a super heavy 700g mass point which sucks up all energy arround.The stiff carbon subchassis helps to transport all vibration in this mass point.So vibrations are transferred in heat The platter intself is from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energie.The belt is made from special anti-static rubber. It's glued and then polished.The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50%The tube is again out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of more tighter mounting of Highend MC cartridges.An external DC powersupply unit with an AC Generator creates new total clean power for the motors . For sure you have also 33 /45 electronic switching.A HIGHEND solution as the whole table. Technical Specifications:Nominal speed: 33/45 rpm, driven by microprocessor, separate control panel, lighted control buttonsSpeed Variance: 33 rpm: ± < 0,08%, 45 rpm: ± < 0,09%Signal to noise: S/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -70 dBDownforce range: 0 – 30 mNSupplied counterweights: without additional insert → for cartridge 5 – 9g (125g), with additional insert → for cartridge 8,5 – 13g (142g)Effective tonearm mass: 16.5 gEffective tonearm lenght: 254 mmOverhang: 16 mmPower consumption: 8,5 W max / 0,5 W stanbyVoltage: Universal swith mode power supply 15 V DC / 1,6 A, 90-264 V AC, 47 – 63HzDimensions (W × H × D): 500 × 400 × 115mm without connectors, 500 × 435 × 115mm with connectors in the rear panelWeight (without box): 13,5 kg + 0,5 kg Separated control panel
EAT's E-Flat is a new, forward-thinking turntable supplied with a revolutionary flat tonearm. Although flat arms have been seen in the past, none have been able to offer the rigidity necessary to deliver the stable performance expected of modern tonearms. Thanks to the continued evolution of carbon fibre, Forte has been able to create an arm with the practical and aesthetic benefits of a flat form, but without the weaknesses.E-Flat's mission is to bring to the music lover the highest quality performance, but in a user-friendly design. Ultra-flat, ultra-light and ultra-rigid, the E-Flat tonearm measures 10in long. A unipivot bearing supports the E-Flat, its fully (and easily) adjustable counterweight decoupled by energy- and vibration-absorbing Sorbothane. The E-Flat's unipivot system is extremely precise and accurately balanced, thanks to components endowed with especially hard metal surfaces. Unwanted motion often attributed to lesser unipivot designs is eliminated by the high mass of unipivot housing and the added security of two metal guides.A further valuable benefit is that its carbon-fibre arm "tube" can be changed by the user to address to specific cartridge requirements, with either lighter or heavier tubes to establish different arm/cartridge resonant frequencies. Adjustable anti-skating and a damped cueing lever are also fitted.A flat arm tube opens up a number of possibilities for the designer – and the listener. Its shape encourages the design of a flatter platter with easier, visible arm levelling, and there is no taper to accommodate. With perfect integration to the unipivot design pillar, no hollow tube to suffer the inevitable echo effects or ringing, greater stiffness, a new and superior hanging counterweight design with very high damping properties, the E-Flat tonearm's performance is truly quiet and incredibly "fast."This handsome and innovative arm is fitted to a turntable that adheres to the basic principles established by the existing models in the Forte family. A belt-drive design, it features two motors, like its 'bigger sisters'. The two motors do not run in parallel, but act like a virtual 24-pole motor. The belt encircles an inner sub-platter, which is fitted with inside bearing made out of bronze bushings. The main platter rests on an inverted bearing and a ceramic ball, with a Teflon lining on the underside of the main platter.As with the larger Forte record decks, the diameter of the platter is oversized compared to those on most competitors' turntables. 33cm was chosen because the moving mass is twice that of a standard 30cm platter. Forte fits a vinyl mat made of recycled LP records to create a surface with properties sympathetic to the LPs it supports. The platter is filled underneath with Sorbothane to stop resonance, while Sorbothane is also used to damp the bearing housing, tonearm base and magnetic feet. In addition to the isolation provided by the magnetic feet, the bearing assembly and platter aperture are suspended. Also in common with the dearer Forte turntables, the Forte E-Flat exhibits an ideal balance between mass-loading and thoughtful subchassis design. Technical Specifications:Dimensions: (WxHxD) 500x400x145mmTurntable weight: 18,7kgPlatter weight: 6,9kgPlatter diameter: 340mmWow and Flutter: +-0,01Tonearm: Flat, CarbonEffective length: 254mm, 10 InchMounting distance: 238mmOverhang: 16mmEffective mass: 4mm 19.5gEffective mass: 3mm 12.5g
Belt-driven Hi-Fi πικάπ, με Low vibration DC motor, ίσιο βραχίονα και βελόνα Ortofon OM10. Διαθέτει ενσωματωμένο σύστημα ελέγχου κινητήρα με διακόπτη ταχύτητας για εύκολη επιλογή δύο διαφορετικών ταχυτήτων 33 / 45 rpm.Χαρακτηριστικά:Turntable Platter:Material: aluminium die-castDiameter: 300mmWeight: 550gΚατανάλωση: 6WΔιαστάσεις WxDxH: 420 x 340 x 121 mmΒάρος: 4.6kgΠικάπ:Type: Belt-Driven Analogue Turntable SystemDrive: Belt driveMotor: DC MotorTurntable Speeds: 2 speeds (33 1/3, 45)Wow and flutter: 0.2% WRMSS/N Ratio: >65 dB (a-weight)Βραχίονας:Type: Static Balanced Straight TonearmEffective Length: 224mmOverhang: 19mmTracking Error Angle: 25°Tracking Force: 1.5gApplicable Cartridge Weight: 4~6gAnti-Skating Range: 0 – 3gTerminals:1x Phono Out (gold-plated)1x GND Earth TerminalΠαρελκόμενα συσκευασίας:Turntable Platter, Dust Cover, 2x Dustcover hinges, Balance Counter Weight, PHONO RCA Cable4, DC power supply with international plugs, Felt Mat, Instruction Manual, Ortofon OM10 cartridge, headshellΤροφοδοσία: DC 12V, 500mA
Το 2Xperience SB S-Shape βασίζεται στην ιδέα της κίνησης ιμάντα του 2Xperience, η οποία ενσωματώνει πάνω από 25 χρόνια εμπειρίας σχεδιασμού πικάπ. Η προσθήκη ελέγχου ακριβείας του κινητήρα με ηλεκτρονική αλλαγή ταχύτητας και ένα βραχίονα από αλουμίνιο υψηλής ακρίβειας 9 "S.Αυτό σημαίνει ότι η ποιότητα αναπαραγωγής έχει βελτιωθεί σημαντικά.Το βαρύ σασί είναι κατασκευασμένο από MDF χρησιμοποιώντας μια αντικραδασμική τεχνική κατασκευής.Η πλατφόρμα είναι κατασκευασμένη με βαρύ σφυρηλατημένο υλικό σε μια ακριβή ισορροπημένη διαμόρφωση σάντουιτς.Ένα στρώμα βινυλίου ενεργεί ως το τέλειο στρώμα περιστρεφόμενου δίσκου.Ένα βιδωτό, ακριβείας κομμένο με διαμάντι και ελαφρύς σφιγκτήρας δίσκου καταργεί τους ανεπιθύμητους κραδασμούς του δίσκου και rumling του κύριου ρουλεμάν του πλατό. Το τελικό προϊόν ωφελείται από το πλατό χωρίς συντονισμό, αποφεύγοντας το φαινόμενο κουδουνίσματος κοινών μεταλλικών και γυάλινων πλατό. Περιλαμβάνεται επίσης ένα ακρυλικό κάλυμμα σκόνης. Ο κορυφαίος βραχίονας αλουμινίου με σχήμα S, πείθει με έναν αρμονικό, μουσικό και συναρπαστικό ήχο.Λόγω του αποσπώμενου shell κεφαλής είναι πολύ εύκολο να αντικαταστήσετε τη κεφαλή. Για την καθημερινή σας χρήση μπορείτε να χρησιμοποιήσετε ένα σύστημα MM και για την καθαρή ευχαρίστηση ακρόασης μπορείτε να αλλάξετε με μια κεφαλή MC. Specifications:Speed: 33, 45 (electronic speed change)Drive principle: belt drivePlatter: 300mm MDFMains bearing: stainless steelWow & flutter: +/- 0,08%Speed drift: +/- 0,5%Signal to noise: - 70dBEffective arm length: 230 mmEffective arm mass: 8,5 gOverhang: 18 mmTracking force: 10 - 30mNIncluded accessories: 15 volts DC / 800 mA power supply, dust coverPower connection: 110/120 or 230/240 Volt - 50 or 60 HzPower consumption: 4 watt max / < 0,5 watt standbyDimensions: 460 x 160 x 360 mm (WxHxD) lid closedWeight: 7,7 kg net
Tο νέο Planar 1 είναι το πιο φιλικό προς το χρήστη Rega πικάπ μέχρι σήμερα. Τώρα με προκαθορισμένο βάρος ανάγνωσης, με τον ολοκαίνουργιο RB110 βραχίονα,το Planar 1 θα εγκατασταθεί μέσα σε λίγα δευτερόλεπτα μετά την απο-συσκευασία του. Απλώς σύρτε το βάρος στο πίσω μέρος του βραχίονα όσο θα πάει, αφαιρέστε το προστατευτικό της βελόνας και αφήστε να γυρίζει το αγαπημένο σας βινύλιο. Κάθε πτυχή του Planar 1 έχει σχεδιαστεί προσεκτικά για να βελτιώσει τις επιδόσεις του. Για πρώτη φορά η κίνηση γίνετε με ένα 24v, (με χαμηλά επίπεδα θορύβου), σύγχρονο κινητήρα για τη μείωση της μεταφοράς κραδασμών σε συνδυασμό με τον ολοκαίνουργιο βραχίονα RB110 .Είναι εξοπλισμένο με ειδικής παραγγελίας έδρανα απο τη Rega με μηδέν τριβή, αυτό είναι πραγματικά ένα νέο πικάπ για το 2016.Χαρακτηριστικά:Τεχνολογία: Πλατό - ΥποπλατόΛειτουργία Plug and Play Σύγχρονο μοτέρ AC 24V ψυχόμενο και νέα πλακέτα PCB υψηλών προδιαγραφών χαμηλού θορύβουPulley αλουμινίου για μηδενικό θόρυβο και καλύτερη ακρίβεια στροφώνΕιδικό πηγάδι μηδενικών ανοχών (new patent) Χειροκίνητη επιλογή ταχυτήτων 33 1/3 rpm, 45 rpmΠρεσαριστό πλατό ειδικής κατασκευής πάχους 23mmΧειροποίητος βραχίονας RB110 μηδενικών τριβών (new patent) Εργοστασιακή κεφαλή ΜΜ (Moving Magnet), μοντέλο CarbonΠροστατευτικό καπάκι από διάφανο plexiglass Νέου τύπου στήριξη 3 σημείων για τέλεια ηχητική απομόνωσηΕργονομικός διακόπτης On/Off κάτω από το πικάπΔιαθέσιμα φινιρίσματα : Black Gloss, White GlossΔιαστάσεις : (W x H x D): 450.0 mm x 115.0 mm x 385.0 mmΒάρος: 5.5 kgΠροαιρετικά (optional): αναβάθμιση με το σετ Performance Pack
Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover. Essential III comes in the aesthetic high gloss colors black, red and white. Χαρακτηριστικά:Digital (Phono + A/D Converter) and Ortofon OM10eBelt drive with synchronous motor and silicone belt Diamond cut aluminum drive pulley Chassis & platter made of resonance in-sensitive MDF Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability Low tolerance platter bearing with strainless steel spindle 8,6” aluminium tonearm with sapphire bearings Ortofon OM10 cartridge pre-mounted High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included Special decoupling feet Dust cover included High-gloss colour options: black, red, white Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net
Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover. Essential III comes in the aesthetic high gloss colors black, red and white. Χαρακτηριστικά:Speed Box and Ortofon OM10eBelt drive with synchronous motor and silicone belt Diamond cut aluminum drive pulley Chassis & platter made of resonance in-sensitive MDF Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability Low tolerance platter bearing with strainless steel spindle 8,6” aluminium tonearm with sapphire bearings Ortofon OM10 cartridge pre-mounted High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included Special decoupling feet Dust cover included High-gloss colour options: black, red, white Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net
Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover. Essential III comes in the aesthetic high gloss colors black, red and white. Χαρακτηριστικά:Bluetooth, Phono and Ortofon OM10eBelt drive with synchronous motor and silicone belt Diamond cut aluminum drive pulley Chassis & platter made of resonance in-sensitive MDF Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability Low tolerance platter bearing with strainless steel spindle 8,6” aluminium tonearm with sapphire bearings Ortofon OM10 cartridge pre-mounted High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included Special decoupling feet Dust cover included High-gloss colour options: black, red, white Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net
Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover. Essential III comes in the aesthetic high gloss colors black, red and white. Χαρακτηριστικά:Record Master (Speed Box, Phono, A/D Converter) and Ortofon OM10eBelt drive with synchronous motor and silicone belt Diamond cut aluminum drive pulley Chassis & platter made of resonance in-sensitive MDF Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability Low tolerance platter bearing with strainless steel spindle 8,6” aluminium tonearm with sapphire bearings Ortofon OM10 cartridge pre-mounted High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included Special decoupling feet Dust cover included High-gloss colour options: black, red, white Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net
The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analog product re-emerged in the “mass market” – something all music lovers could afford. The new Debut RecordMaster has been designed to set new standards in this category for the coming decade – perfectly timed as analog today is again a respected source, while the demand for good turntables with all speeds is growing fast! It comes with improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilizing TPE), ultra precision frequency DC-driven AC generator for ultimate speed stability.Ultimate convenience is achieved, because of electronic speed change („Speed Box“) and the possibility of playing 78rpm. A simple exchange of stylus to OM78 (not included) and a drive belt turnover to the larger diameter of a pulley is required, that´s all! Because Debut RecordMaster comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hi-fi system and recording of vinyl to PC/Mac easily can be done simultaneously! Χαρακτηριστικά:Precision belt drive with synchronous motor Electronic speed control with 33/45 rpm (78) speed change, which acts as “Speed Box” with ultimate speed stability 8,6‘‘ aluminum tonearm Steel platter weighing 1,3 kg with a felt mat Built-in MM phono preamplifier with USB out Simultaneously connection with amplifier & PC/Mac OM 10 moving-magnet cartridge fitted Available in 3 high-gloss finishes (piano-black, red or white) and walnut matt
Tο 1 Xpression III Comfort από την Pro-ject Audio, είναι ένα πικάπ Hi-Fi, belt drive, με γυαλιστερή ανθρακί επιφάνεια, βάση από MDF, ακρυλικό πλατώ βάρους 0,9 kg, βραχίονα 8,6" από ανθρακόνημα και κεφαλή από αλουμίνιο.Το 1 Xpression III Comfort δίνει την επιλογή προσαρμογής ύψους από αλουμινένιους κώνους, εναλλαγής ταχύτητας ανάμεσα σε 22 και 45 rpb, ενω έχει και τη δυνατότητα αυτόματης διακοπής στο τέλος του δίσκου. Στη συσκευασία περιλαμβάνεται και βελόνα Ortofon 2M red.Χαρακτηριστικά:Fitted cartridge: optional Ortofon 2M RedBelt drive design with low noise AC motor Type Select 2 Plinth out of MDF with high gloss anthracite surface Acrylic 0,9 kg platter Platter bearing Type Block 2: Low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing Motor decoupled to reduce vibration Integrated Speed Box allows electronically switchable speed between 33 and 45 Upm Automatic cutoff at the end of the record Height adjustable rubber-damped aluminum cones Gold-plated RCA phono sockets 8.6 Carbon fiber tone-arm with aluminum headshell Conical arm tube avoids standing wave reflections Inverted tonearm bearing comprises inverted hardened stainless-steel and sapphire thrust-pads Solid arm base permits accurate height adjustment of arm tube and VTA (vertical tracing angle) Single-screw fixing of arm tube allows rotation for easy adjustment of needle azimuth despite fixed headshell Highly flexible top-grade copper internal wiring Silicon damped tone-arm lift Resonance optimized counterweight construction
W with 2M Silver phono cartridge This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor.The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Χαρακτηριστικά:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightAvailable with 2M Silver phono cartridgeClassic wooden chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dust cover included
This special collaboration between Pro-Ject Audio Systems and the Universal Music Group features one of the most influencing artists of modern history, former Beatles member George Harrison! The turntable used is Essential III, the evolution of a milestone. It features high quality and audiophile components, such as an Ortofon OM10 cartridge, a precision diamond cut aluminum pulley, top notch MDF chassis, an acrylic platter or a completely redesigned motor control. Its sound is both lively and relaxing, musical and detailed just like the music from George Harrison, therefore they are perfect partners in crime. The artwork on the turntable was created by Studio Number One. The original design was created by Shepard Fairey, one of the most respected street artists around, for the Harrison family. It features a distinctive portrait of George Harrison and forms together with the Indian patterns and the analog mixing console (below the acrylic platter) with a unique look. This one of a kind masterpiece is limited to 2500 pieces worldwide. Προδιαγραφές:Special edition of Essential III Limited to 2500 pieces worldwide! Acrylic platter Artwork by respected street artist Shepard Fairey! Belt drive with synchronous motor and silicone belt Diamond cut aluminum drive pulley Chassis made of resonance in-sensitive MDF Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability Low tolerance platter bearing with stainless steel spindle 8,6” aluminum tonearm with sapphire bearings Ortofon OM10 cartridge pre-mounted High-quality semi-balanced Connect it E phono interconnect With gold-plated RCA connectors included Special decoupling feet Dust cover included Χαρακτηριστικά:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,70% 45: 0,60%Wow & flutter: 33: 0,21% 45: 0,19%Platter: 300mm acrylic with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net
Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phono graphic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover. Essential III comes in the aesthetic high gloss colors black, red and white. Χαρακτηριστικά:Belt drive with synchronous motor and silicone belt Diamond cut aluminium drive pulley Chassis & platter made of resonance in-sensitive MDF Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability Low tolerance platter bearing with strainless steel spindle 8,6” aluminium tonearm with sapphire bearings Ortofon OM10 cartridge pre-mounted High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included Special decoupling feet Dust cover included High-gloss colour options: black, red, white Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net
Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover. Essential III comes in the aesthetic high gloss colors black, red and white. Χαρακτηριστικά:Phono and Ortofon OM10eBelt drive with synchronous motor and silicone belt Diamond cut aluminum drive pulley Chassis & platter made of resonance in-sensitive MDF Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability Low tolerance platter bearing with strainless steel spindle 8,6” aluminium tonearm with sapphire bearings Ortofon OM10 cartridge pre-mounted High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included Special decoupling feet Dust cover included High-gloss colour options: black, red, white Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net
This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor.The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Χαρακτηριστικά:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightOptionally available with 2M Silver phono cartridgeClassic wooden chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dust cover included
W with 2M Silver phono cartridge This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor.The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Χαρακτηριστικά:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightAvailable with 2M Silver phono cartridgeClassic wooden chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dust cover included
The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic subchassis suspension system avoids parasitic noise normally caused by con-ventional spring mechanism.A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter's outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change. The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections.Προδιαγραφές:Acrylic Plinth Sub-chassis made from Corian with magnetic suspension Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat Inverted main bearing with ceramic ball/plate Belt drive with AC motor with DC driven AC generator Electronic speed control with 33/45 rpm switching Pre-mounted 9" tonearm 9 cc Evolution Tonearm bearings with ABEC 7 ballraces 5P Connect it Phono CC cable with RCA plugs
This turntable makes use of traditional frame design which was established by the famous turntable manufacturers of the 50's and 60's. It uses a compact simple and elegant form factor.The Classic incorporates a combination of approved belt drive design using a low noise AC motor with an ultra-precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability. Advanced technology is used for decoupling and the completely new designed tone-arm Χαρακτηριστικά:Belt drive with manual speed control 33/45 rpmHeight adjustable decoupling feetPrecision balanced TPE*-damped aluminium-platter / felt matMetal/MDF sandwich chassis floating on TPE* suspension9” carbon/aluminium tonearm with MM & MC capabilityJapanese ball bearing (base of tonearm)Integrated central vertical cable outlet for unhindered arm movementUltra low friction Zircon pin-point cardan bearings (top & side)Azimuth and VTA fully adjustableTPE damped counterweightOptionally available with 2M Silver phono cartridgeClassic wooden chassis in 3 matt finishes (walnut, rose nut, eucalyptus)Dust cover included
Φορητό πικάπ με διακόπτη scratch, ενσωματωμένο ηχείο, εξόδους RCA, σύνδεση USB και δυνατότητα αυτόνομης λειτουργίας με μπαταρίες (δεν περιλαμβάνονται).Χαρακτηριστικά:3 ταχύτητες 33 1/3, 45 και 78 στροφέςΠροστατευτικό κάλυμμα και ενσωματωμένη χειρολαβήΕνσωματωμένο ηχείοΘύρα USB για τη σύνδεση και εγγραφή σε υπολογιστήΈξοδος ακουστικών και είσοδος aux 1/8”
A turntable set-up does not need to be complicated like rocket-science, our VTE turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users.The VTE turntable can be positioned on a table or mounted on a wall. The fastest installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set.Προδιαγραφές:Vertical standing or wall mount option included Choose “R” (right-handed) or “L” (left-handed) version Instant playback with super-easy setup Record clamp for secure record fixing Belt drive with silicone belt Low vibration synchronous motor & DC power supply 8,6” aluminium tonearm Ortofon OM5e cartridge, pre-mounted Pre-adjusted tracking force & anti-skating force Special mechanism for perfect tracking in vertical position Pre-mounted gold-plated RCA interconnect cable Χαρακτηριστικά:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,8% 45: 0,7%Wow & flutter: 33: 0,29% 45: 0,27%Signal to noise: - 65dBPlatter: 300mm MDF with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mN (OM5 18mN pre-adjusted)Included accessory: power supply, record clampPower consumption: 4,5 wattsDimensions (standing on table): 430 x 345 x 245mm (WxHxD)Dimensions (mounted on wall): 430 x 310 x 130mm (WxHxD)Weight: 2,8 kg net
A turntable set-up does not need to be complicated like rocket-science, our VTE turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users.The VTE turntable can be positioned on a table or mounted on a wall. The fastest installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set.Προδιαγραφές:Vertical standing or wall mount option included Choose “R” (right-handed) or “L” (left-handed) version Instant playback with super-easy setup Record clamp for secure record fixing Belt drive with silicone belt Low vibration synchronous motor & DC power supply 8,6” aluminium tonearm Ortofon OM5e cartridge, pre-mounted Pre-adjusted tracking force & anti-skating force Special mechanism for perfect tracking in vertical position Pre-mounted gold-plated RCA interconnect cable Χαρακτηριστικά:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,8% 45: 0,7%Wow & flutter: 33: 0,29% 45: 0,27%Signal to noise: - 65dBPlatter: 300mm MDF with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mN (OM5 18mN pre-adjusted)Included accessory: power supply, record clampPower consumption: 4,5 wattsDimensions (standing on table): 430 x 345 x 245mm (WxHxD)Dimensions (mounted on wall): 430 x 310 x 130mm (WxHxD)Weight: 2,8 kg net
A turntable set-up does not need to be complicated like rocket-science, our VTE turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users.The VTE turntable can be positioned on a table or mounted on a wall. The fastest installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set.Προδιαγραφές:Vertical standing or wall mount option included Choose “R” (right-handed) or “L” (left-handed) version Instant playback with super-easy setup Record clamp for secure record fixing Belt drive with silicone belt Low vibration synchronous motor & DC power supply 8,6” aluminium tonearm Ortofon OM5e cartridge, pre-mounted Pre-adjusted tracking force & anti-skating force Special mechanism for perfect tracking in vertical position Pre-mounted gold-plated RCA interconnect cable Χαρακτηριστικά:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,8% 45: 0,7%Wow & flutter: 33: 0,29% 45: 0,27%Signal to noise: - 65dBPlatter: 300mm MDF with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mN (OM5 18mN pre-adjusted)Included accessory: power supply, record clampPower consumption: 4,5 wattsDimensions (standing on table): 430 x 345 x 245mm (WxHxD)Dimensions (mounted on wall): 430 x 310 x 130mm (WxHxD)Weight: 2,8 kg net
A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board. Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface. Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data. Χαρακτηριστικά:Belt drive with silicone belt Low vibration synchronous motor Integrated motor control with DC power supply secures silent running Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom 8,6” aluminium tonearm with sapphire bearings Ortofon OM5e cartridge, pre-mounted Pre-mounted gold-plated RCA interconnect cable Built-in MM phono stage Connections: line-level RCA to amp & USB to PC/Mac (simultaneously) Special turntable feet for effective decoupling Colour options: Black, Red, White
A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board. Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface. Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data. Χαρακτηριστικά:Belt drive with silicone belt Low vibration synchronous motor Integrated motor control with DC power supply secures silent running Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom 8,6” aluminium tonearm with sapphire bearings Ortofon OM5e cartridge, pre-mounted Pre-mounted gold-plated RCA interconnect cable Built-in MM phono stage Connections: line-level RCA to amp & USB to PC/Mac (simultaneously) Special turntable feet for effective decoupling Colour options: Black, Red, White
A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board. Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface. Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data. Χαρακτηριστικά:Belt drive with silicone belt Low vibration synchronous motor Integrated motor control with DC power supply secures silent running Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom 8,6” aluminium tonearm with sapphire bearings Ortofon OM5e cartridge, pre-mounted Pre-mounted gold-plated RCA interconnect cable Built-in MM phono stage Connections: line-level RCA to amp & USB to PC/Mac (simultaneously) Special turntable feet for effective decoupling Colour options: Black, Red, White
Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems.The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in white.Προδιαγραφές:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio Perfect solution if only a digital input is available Easy set-up Belt drive with silicone belt and low vibration motor 8,6” aluminium tonearm with sapphire bearings Ortofon OM5e cartridge pre-mounted Built-in phono pre-amplifier with analogue & digital out Gold-plated RCA interconnect cable included Special turntable feet for effective decoupling Χαρακτηριστικά:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)
Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems.The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in black.Προδιαγραφές:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio Perfect solution if only a digital input is available Easy set-up Belt drive with silicone belt and low vibration motor 8,6” aluminium tonearm with sapphire bearings Ortofon OM5e cartridge pre-mounted Built-in phono pre-amplifier with analogue & digital out Gold-plated RCA interconnect cable included Special turntable feet for effective decoupling Χαρακτηριστικά:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)