ART

Problem: A performer needs to hear him/herself through headphones exclusively or mixed with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the mic signal, however, should be going to the main mixer.Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic and line Monitor levels can then be adjusted for mix and volume through the headphones. Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered, the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or condenser mics can be used since phantom power would come through the Mic Thru jack from the mixer or other source.Specifications:Maximum Input Level: -20dB mic, 40dB MonitorOutput Impedance: 10 ΩSignal To Noise Ratio: 90dBGain: 15dB (1/4 in), 50dB (XLR)Power: LED indicatorDimensions: 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)Weight: 1.3lb (590g)Power Requirements: 12V DC (Adapter included) or one 9V battery

The HeadAmp4 offers 1/8th-inch as well as 1/4-inch inputs and outputs as well as lower noise, lower distortion and more output in a new custom extruded stackable metal case.Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source.Individual level controls for the four headphone outs, 1/4-inch and now 1/8th-inch connections allow the HeadAmp4 to connect to virtually any source, and drive any headphone configuration including studio phones, in-ear monitors or custom ear pieces or any combination of the above.Features:4 Output Channels Each with Individual Volume ControlStereo ¼-inch & 1/8-inch Inputs (Wired Parallel)Can be Connected to Any Line-Level Source or Headphone OutputFour Stereo ¼-inch & Four 1/8-inch Headphone OutputsPower "On" LEDSpecifications:Maximum Input Level: +14dBVInput Impedance: 90.9k ΩMaximum Output Level: +14dBuMaximum Gain: 20dBOutput Impedance: 47 Ω (each output)Frequency Response: 20 - 20 kHzSignal To Noise Ratio: > 90dB (ref 0dBu)Total Harmonic Distortion: