Crown

Meet the new XLS DriveCore™ 2 SeriesThe next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.Join the social conversation: #BeHeardXLS

Τελικός ενισχυτής 2Χ600W/4Ω, 2Χ600W/70V, δυνατότητα bridge λειτουργίας, ρυθμιζόμενο high pass filter, είσοδοι balanced με phoenix connectors, έξοδοι barrier strip, δυνατότητα IQ-PIP modules, level remote control μέσω εντοιχιζόμενων volume, 2U. Κατάλληλος για μόνιμες και σταθερού voltage εγκαταστάσεις. Βάρος 11Kg.

Τελικός ενισχυτής Switching με ισχύ 2X700W/4Ω & 2Χ500W/70V. Δυνατότητα bridge λειτουργίας, εξελιγμένο τροφοδοτικό για λειτουργία σε οποιοδήποτε voltage, LCD οθόνη ενδείξεων στην εμπρόσθια πρόσοψη, με ενσωματωμένο επεξεργαστή DSP με έτοιμα preset για διάφορα ηχεία, EQ, limiting, compression, delay, crossover frequencies και subharmonic synthesizer. Είσοδοι balanced με phoenix connectors έξοδοι με barrier strip. Μεταβλητού βήματος ανεμιστήρες στο σύστημα ψύξης, με σύστημα προστασίας και ελέγχου 5 διαφορετικών σημείων, με 6 led ενδείξεων διαφόρων λειτουργιών. Διαχείριση μέσω με Η/Υ (USB) συμβατότητα με HiQnet. Κατάλληλος για μόνιμες εγκαταστάσεις, ειδικός ενισχυτής για 100V συστήματα πολλαπλών και σύνθετων εγκαταστάσεων. Βάρος 10Kgr.

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost.  Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300BL offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more.  Designed for ease-of-use in a variety of applications, the 4|300BL is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.  The 4|300BL also comes with BLU link, adding the ability to send and receive channels over HARMAN’s digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.Χαρακτηρτιστικά:Signal to Noise Ratio (dB): >103 dBTotal Harmonic Distortion (THD) (full rated power, 20Hz to 20kHz) 85 dB, >55 dBLoad Impedance: OhmPower Output W/8Ω: 375Power Output W/Brigde Mode/8Ω: 1300Voltage Gain (dB): 31 dBInput Sensitivity: 1.4Vrms (for full rated power at 4 ohms)Width (cm): 48.3

Two-channel, 525W @ 4Ω Power AmplifierSpecifications:Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)Higher DSP capabilities: More control; has band pass filter per channel Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venuesSelectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full powerSet sleep mode after specified time without having to press a buttonSecurity setting disables menu buttons; menu locked/unlocked by entering combinationSystem reset allows factory settings to be restoredRemote power triggerPeakx Limiters provide maximum output while protecting your speakersXLR, 1/4", RCA inputs provide flexibilityIntegrated PureBand Crossover System for better performance and controlEfficient forced-air fans prevent excessive thermal buildup

Amplifier 2x800W/4O-520W/8O-1Ch1600W bridge amplifier 8W. Stereo / Parallel / Bridge mode. 0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post.Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 15.2 kg.

Amplifier 2x300W/4O-200W/8O-1Ch600W bridge amplifier 8W. Stereo / Parallel / Bridge mode.0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post. Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 12.2 kg.

Two-channel, 350W @ 4Ω Power AmplifierSpecifications:Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)Higher DSP capabilities: More control; has band pass filter per channel Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venuesSelectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full powerSet sleep mode after specified time without having to press a buttonSecurity setting disables menu buttons; menu locked/unlocked by entering combinationSystem reset allows factory settings to be restoredRemote power triggerPeakx Limiters provide maximum output while protecting your speakersXLR, 1/4", RCA inputs provide flexibilityIntegrated PureBand Crossover System for better performance and controlEfficient forced-air fans prevent excessive thermal buildup

Amplifier 2x450W/4O-330W/8O-1Ch900W bridge amplifier 8W. Stereo / Parallel / Bridge mode. 0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post. Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 13.7 kg.

Amplifier 2x1600W/4O-1250W/8O-1Ch3200W bridge amplifier 8W. Stereo / Parallel / Bridge mode.0.775-1.4v sensitivity. Inputs Outputs XLR/RCA- Speakon + Binding post.Regulatory Level-gain-operation mode. Indicative LED. Ground fault protection for space-charge-delayed start-suppression RF. 2RU Dimensions 8.9 x 48.1 x 38.6cm. Weight 18.7 kg.

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Features Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 700W 2Ω, 500W 4Ω, 275W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 12.25" Weight 18.5 lbs (8.4 kg) Shipping Weight 21.5 lbs (9.8 kg) IEC Power Connector 15A

here's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Features Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 1000W 2Ω, 800W 4Ω, 475W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 100 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 12.25" Weight 18.5 lbs (8.4 kg) Shipping Weight 21.5 lbs (9.8 kg) IEC Power Connector 15A

DSP controlled Power: 2x 1600 W (2 ohm), 1200 W (4 ohm), 650 W (8 ohm), 2400 W bridge (8 ohm), 3200 W bridge (4 ohm) DSP Applications: input EQ with 6 parametric filters per channel with adjustable Q- factor and +/- 15 dB gain Crossover with high and low pass Each channel with 6/ 12/ 18/ 24 dB per octave and switchable polarity Output EQ with 8 parametric filters per channel with adjustable Q- factor and +/- 15 dB gain Delay up to 50 ms Subharmonic synth Peak plus limiter with adjustable threshold, attack and release 50 Presets 3 Switchable fan-mode controls HiQnet band manager and system architect control software via USB port Display for the mains voltage and power supply temperature Connectors: 2x NL4 speaker twist out, binding post out, XLR in/ out Dimensions: 19” (485 mm) x 2 U (89 mm) x 311 mm Weight 8.4 Kg

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat. Features Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application New system monitoring provides software visibility of AC line voltage and power supply temperature Integrated cast-aluminum handles for easy handling and enhanced durability Locking power cord clip provides a secure connection between the amplifier and power cord Updated HiQnet System Architect™ control software Increased number of presets to a total of 50; 49 of which are user definable Specifications Channels 2 Sensitivity 1.4V Rated Power Output (per channel) 3000W 2Ω, 2100W 4Ω, 1200W 8Ω Signal to Noise Ratio (below rated 1 kHz power at 8 ohms) 103 dB (A-weighted) THD < 0.5% Frequency Response (at 1W, 20 Hz - 20 kHz) + 0 dB, -1 dB Crosstalk (below rated power) 20 Hz to 1 kHz >70 dB Dimensions 3.5" x 19" x 16.2" Weight 24 lbs (10.9 kg) Shipping Weight 30 lbs (13.6 kg) IEC Power Connector 20A

Amplifier Switching with power 2X1000W/2Ω, 2X800W/4Ω & 2Χ800W/70V. Bridge operation possibility, power supply for operation in any voltage, LCD screen, embodied DSP processor with ready presets for various speakers, EQ, limiting, compression, delay, crossover frequencies & subharmonic synthesizer. Balanced inputs with phoenix connectors outputs with barrier strip. Management through PC (USB) compatible with HiQnet. Suitable for permanent installations. Weight 10Kgr.