Dali

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON VOKAL is the ultimate centre loudspeaker. Striking an elegant balance between size and performance, the RUBICON VOKAL is powerful enough to match the RUBICON 8, and still compact enough to fit in most living rooms.The two 6½” low-loss wood fibre woofers deliver a clear and well defined mid-range together with the hybrid tweeter module. It also uses the same soft dome diaphragm and many of the same SMC technologies as used in the EPICON series.The cabinet size helps the RUBICON VOKAL reproduce even the lowest bass frequencies from the gripping action on the screen or stunning musical performances.And like the rest of the RUBICON range, it features gold-plated bi-wiring terminals.The RUBICON VOKAL fits into every RUBICON surround system and can be combined with e.g. a pair of RUBICON 5, a pair of RUBICON 2 and a SUB or a pair of RUBICON 6, a pair of RUBICON LCR and a DALI SUB. In general, we recommend the SUB M-10 D for a RUBICON surround setup.  WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 34.000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 2,700 / 14,000Crossover Principle : 2 + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 36.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : 5 - 100Dimensions With Base (HxWxD) [mm] : 197 x 581 x 400Weight [kg] : 13.8Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers

RUBICON VOKAL is the ultimate centre loudspeaker. Striking an elegant balance between size and performance, the RUBICON VOKAL is powerful enough to match the RUBICON 8, and still compact enough to fit in most living rooms.The two 6½” low-loss wood fibre woofers deliver a clear and well defined mid-range together with the hybrid tweeter module. It also uses the same soft dome diaphragm and many of the same SMC technologies as used in the EPICON series.The cabinet size helps the RUBICON VOKAL reproduce even the lowest bass frequencies from the gripping action on the screen or stunning musical performances.And like the rest of the RUBICON range, it features gold-plated bi-wiring terminals.The RUBICON VOKAL fits into every RUBICON surround system and can be combined with e.g. a pair of RUBICON 5, a pair of RUBICON 2 and a SUB or a pair of RUBICON 6, a pair of RUBICON LCR and a DALI SUB. In general, we recommend the SUB M-10 D for a RUBICON surround setup.  WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 34.000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 2,700 / 14,000Crossover Principle : 2 + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 36.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : 5 - 100Dimensions With Base (HxWxD) [mm] : 197 x 581 x 400Weight [kg] : 13.8Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers

RUBICON VOKAL is the ultimate centre loudspeaker. Striking an elegant balance between size and performance, the RUBICON VOKAL is powerful enough to match the RUBICON 8, and still compact enough to fit in most living rooms.The two 6½” low-loss wood fibre woofers deliver a clear and well defined mid-range together with the hybrid tweeter module. It also uses the same soft dome diaphragm and many of the same SMC technologies as used in the EPICON series.The cabinet size helps the RUBICON VOKAL reproduce even the lowest bass frequencies from the gripping action on the screen or stunning musical performances.And like the rest of the RUBICON range, it features gold-plated bi-wiring terminals.The RUBICON VOKAL fits into every RUBICON surround system and can be combined with e.g. a pair of RUBICON 5, a pair of RUBICON 2 and a SUB or a pair of RUBICON 6, a pair of RUBICON LCR and a DALI SUB. In general, we recommend the SUB M-10 D for a RUBICON surround setup.  WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 34.000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 2,700 / 14,000Crossover Principle : 2 + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 36.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : 5 - 100Dimensions With Base (HxWxD) [mm] : 197 x 581 x 400Weight [kg] : 13.8Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers

The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home.absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves.The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses. The loudspeaker is the result of a passionate, tireless quest to reach perfection.There are musical experiences in life so epic that you wish they would never end. Moments so wonderfully overpowering the very thought of them makes your heart tremble, your mind go wandering and your ears yearn for more. With the new, awe inspiring DALI EPICON 8 loudspeaker you can relive that sensation, again and again.Prepare yourself for musical indulgence like never before – and for a beautifully statuesque design your guests will envy. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 50 - 500Crossover Frequency [Hz] : 550 / 3,100 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome  Midrange driver, Quantity : 1 x 6½"Midrange driver, Diaphragm type : Wood Fibre Cone Low frequency driver, Quantity : 2 x 8"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 28.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : FloorRecommended Distance From Wall [cm] : > 35Dimensions With Base (HxWxD) [mm] : 1262 x 353 x 497Dimensions (HxWxD) [mm] : 1225 x 264 x 485Weight [kg] : 47.5Accessories Included : Base Manual Micro Fibre Cloth Rubber Pads Spikes M10 Terminal Links  

The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home.absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves.The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses. The loudspeaker is the result of a passionate, tireless quest to reach perfection.There are musical experiences in life so epic that you wish they would never end. Moments so wonderfully overpowering the very thought of them makes your heart tremble, your mind go wandering and your ears yearn for more. With the new, awe inspiring DALI EPICON 8 loudspeaker you can relive that sensation, again and again.Prepare yourself for musical indulgence like never before – and for a beautifully statuesque design your guests will envy. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 50 - 500Crossover Frequency [Hz] : 550 / 3,100 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome  Midrange driver, Quantity : 1 x 6½"Midrange driver, Diaphragm type : Wood Fibre Cone Low frequency driver, Quantity : 2 x 8"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 28.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : FloorRecommended Distance From Wall [cm] : > 35Dimensions With Base (HxWxD) [mm] : 1262 x 353 x 497Dimensions (HxWxD) [mm] : 1225 x 264 x 485Weight [kg] : 47.5Accessories Included : Base Manual Micro Fibre Cloth Rubber Pads Spikes M10 Terminal Links  

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear.Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear.Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear.Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear.Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

If you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the speaker – the most diminutive in the EPICON family. Sitting gracefully upon its custom-made stand EPICON 2 produces an astonishingly large and accurate three-dimensional sound that will impress even the most rigorous demands of true audiophiles. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. LINEAR DRIVE MAGNET SYSTEMThe new innovative in-house developed SMC based Linear Drive Magnet System eliminates four distortion factors in the driver motor system. Eddy current, Hysteresis, Flux variations and Voice Coil Inductance. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves. PRODUCT DETAILSIf you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the loudspeaker – the most diminutive in the EPICON family.Sitting gracefully upon its custom-made stand EPICON 2 produces an astonishingly large and accurate three-dimensional sound that will impress even the most rigorous demands of true audiophiles.The Powerful Younger Sibling.The two channel speaker features a 6 ½“ bass driver and a soft cone dome tweeter. In fact, the technological breakthroughs designed for the larger EPICON 6 and EPICON 8models have been channelled into EPICON 2 to create a loudspeaker that performs way beyond its size expectations.EPICON 2 demonstrates perfectly what this new series is all about: Minimal signal degradation… or put bluntly: Transparency and revelation taken to an - until now – unseen level!This speaker demonstrates a highly linear and coherent response, and integrates well with small to medium sized rooms. The woofer roll-off is slow, and the speaker reaches deep into the lowest frequencies. All in all, in most setups this will sound like a much larger speaker than it really is.Within its working range the EPICON 2 will fully match the performance quality of its larger siblings, the EPICON 6 and EPICON 8. This is the new compact loudspeaker for the purist seeking high-performance. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON 2 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible TWEETERLow resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling.This also means superb control of coil movement – even at very high sound pressure levels. Free of artefacts, e.g. resonances and high Q peaks the EPICON 2 tweeter features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: The DALI EPICON 2 woofer are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 2 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 47 - 30,000Sensitivity (2,83 V/1 m) [dB] : 87.0Nominal Impedance [ohms] : 4Maximum SPL [dB] : 108Recommended Amplifier Power [W] : 30 - 200Crossover Frequency [Hz] : 3,100Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 1 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 43.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : Shelf or stand Recommended Distance From Wall [cm] : > 25Dimensions (HxWxD) [mm] : 386 x 214 x 366Weight [kg] : 10.3Accessories Included : Manual Rubber Pads Terminal Links Micro Fibre Cloth​

If you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the speaker – the most diminutive in the EPICON family. Sitting gracefully upon its custom-made stand EPICON 2 produces an astonishingly large and accurate three-dimensional sound that will impress even the most rigorous demands of true audiophiles. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. LINEAR DRIVE MAGNET SYSTEMThe new innovative in-house developed SMC based Linear Drive Magnet System eliminates four distortion factors in the driver motor system. Eddy current, Hysteresis, Flux variations and Voice Coil Inductance. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves. PRODUCT DETAILSIf you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the loudspeaker – the most diminutive in the EPICON family.Sitting gracefully upon its custom-made stand EPICON 2 produces an astonishingly large and accurate three-dimensional sound that will impress even the most rigorous demands of true audiophiles.The Powerful Younger Sibling.The two channel speaker features a 6 ½“ bass driver and a soft cone dome tweeter. In fact, the technological breakthroughs designed for the larger EPICON 6 and EPICON 8models have been channelled into EPICON 2 to create a loudspeaker that performs way beyond its size expectations.EPICON 2 demonstrates perfectly what this new series is all about: Minimal signal degradation… or put bluntly: Transparency and revelation taken to an - until now – unseen level!This speaker demonstrates a highly linear and coherent response, and integrates well with small to medium sized rooms. The woofer roll-off is slow, and the speaker reaches deep into the lowest frequencies. All in all, in most setups this will sound like a much larger speaker than it really is.Within its working range the EPICON 2 will fully match the performance quality of its larger siblings, the EPICON 6 and EPICON 8. This is the new compact loudspeaker for the purist seeking high-performance. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON 2 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible TWEETERLow resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling.This also means superb control of coil movement – even at very high sound pressure levels. Free of artefacts, e.g. resonances and high Q peaks the EPICON 2 tweeter features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: The DALI EPICON 2 woofer are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 2 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 47 - 30,000Sensitivity (2,83 V/1 m) [dB] : 87.0Nominal Impedance [ohms] : 4Maximum SPL [dB] : 108Recommended Amplifier Power [W] : 30 - 200Crossover Frequency [Hz] : 3,100Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 1 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 43.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : Shelf or stand Recommended Distance From Wall [cm] : > 25Dimensions (HxWxD) [mm] : 386 x 214 x 366Weight [kg] : 10.3Accessories Included : Manual Rubber Pads Terminal Links Micro Fibre Cloth​

If you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the speaker – the most diminutive in the EPICON family. Sitting gracefully upon its custom-made stand EPICON 2 produces an astonishingly large and accurate three-dimensional sound that will impress even the most rigorous demands of true audiophiles. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. LINEAR DRIVE MAGNET SYSTEMThe new innovative in-house developed SMC based Linear Drive Magnet System eliminates four distortion factors in the driver motor system. Eddy current, Hysteresis, Flux variations and Voice Coil Inductance. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves. PRODUCT DETAILSIf you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the loudspeaker – the most diminutive in the EPICON family.Sitting gracefully upon its custom-made stand EPICON 2 produces an astonishingly large and accurate three-dimensional sound that will impress even the most rigorous demands of true audiophiles.The Powerful Younger Sibling.The two channel speaker features a 6 ½“ bass driver and a soft cone dome tweeter. In fact, the technological breakthroughs designed for the larger EPICON 6 and EPICON 8models have been channelled into EPICON 2 to create a loudspeaker that performs way beyond its size expectations.EPICON 2 demonstrates perfectly what this new series is all about: Minimal signal degradation… or put bluntly: Transparency and revelation taken to an - until now – unseen level!This speaker demonstrates a highly linear and coherent response, and integrates well with small to medium sized rooms. The woofer roll-off is slow, and the speaker reaches deep into the lowest frequencies. All in all, in most setups this will sound like a much larger speaker than it really is.Within its working range the EPICON 2 will fully match the performance quality of its larger siblings, the EPICON 6 and EPICON 8. This is the new compact loudspeaker for the purist seeking high-performance. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON 2 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible TWEETERLow resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling.This also means superb control of coil movement – even at very high sound pressure levels. Free of artefacts, e.g. resonances and high Q peaks the EPICON 2 tweeter features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: The DALI EPICON 2 woofer are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 2 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 47 - 30,000Sensitivity (2,83 V/1 m) [dB] : 87.0Nominal Impedance [ohms] : 4Maximum SPL [dB] : 108Recommended Amplifier Power [W] : 30 - 200Crossover Frequency [Hz] : 3,100Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 1 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 43.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : Shelf or stand Recommended Distance From Wall [cm] : > 25Dimensions (HxWxD) [mm] : 386 x 214 x 366Weight [kg] : 10.3Accessories Included : Manual Rubber Pads Terminal Links Micro Fibre Cloth​

If you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the speaker – the most diminutive in the EPICON family. Sitting gracefully upon its custom-made stand EPICON 2 produces an astonishingly large and accurate three-dimensional sound that will impress even the most rigorous demands of true audiophiles. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. LINEAR DRIVE MAGNET SYSTEMThe new innovative in-house developed SMC based Linear Drive Magnet System eliminates four distortion factors in the driver motor system. Eddy current, Hysteresis, Flux variations and Voice Coil Inductance. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves. PRODUCT DETAILSIf you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the loudspeaker – the most diminutive in the EPICON family.Sitting gracefully upon its custom-made stand EPICON 2 produces an astonishingly large and accurate three-dimensional sound that will impress even the most rigorous demands of true audiophiles.The Powerful Younger Sibling.The two channel speaker features a 6 ½“ bass driver and a soft cone dome tweeter. In fact, the technological breakthroughs designed for the larger EPICON 6 and EPICON 8models have been channelled into EPICON 2 to create a loudspeaker that performs way beyond its size expectations.EPICON 2 demonstrates perfectly what this new series is all about: Minimal signal degradation… or put bluntly: Transparency and revelation taken to an - until now – unseen level!This speaker demonstrates a highly linear and coherent response, and integrates well with small to medium sized rooms. The woofer roll-off is slow, and the speaker reaches deep into the lowest frequencies. All in all, in most setups this will sound like a much larger speaker than it really is.Within its working range the EPICON 2 will fully match the performance quality of its larger siblings, the EPICON 6 and EPICON 8. This is the new compact loudspeaker for the purist seeking high-performance. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON 2 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible TWEETERLow resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling.This also means superb control of coil movement – even at very high sound pressure levels. Free of artefacts, e.g. resonances and high Q peaks the EPICON 2 tweeter features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: The DALI EPICON 2 woofer are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 2 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 47 - 30,000Sensitivity (2,83 V/1 m) [dB] : 87.0Nominal Impedance [ohms] : 4Maximum SPL [dB] : 108Recommended Amplifier Power [W] : 30 - 200Crossover Frequency [Hz] : 3,100Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 1 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 43.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : Shelf or stand Recommended Distance From Wall [cm] : > 25Dimensions (HxWxD) [mm] : 386 x 214 x 366Weight [kg] : 10.3Accessories Included : Manual Rubber Pads Terminal Links Micro Fibre Cloth​

Turn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. GOLD PLATED TERMINALSEngineered by DALI for ultra low contact resistance, durability and mechanically sturdy construction. High quality gold-plated binding posts. PRODUCT DETAILSTurn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the DALI EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy.We have developed an uncompromising center speaker for all of you multi-channel fans - the DALI EPICON VOKAL. Incorporating 2 x 6½” woofers along with the hybrid tweeter module this speaker promises the same level of transparency and timbre matching with the rest of the series.The EPICON VOKAL will match any of the three main loudspeakers, and it will benefit any setup where the realism and realistic sound pressures are required. Common to all the EPICON loudspeakers is that they work well in both 2.0, 2.1, 5.1 or other multichannel systems.50% of the acoustic energy in a normal movie comes from the center channel. The EPICON VOKAL is up to the real challenge. Meticulous timbre matching and the same ability to render finer details exactly the way they were recorded is an EPICON trademark. Here, e.g. the effortless reproduction of human voices is what sets DALI EPICON VOKAL apart.Note: To mount the EPICON VOKAL securely on the EPICON Stand, the VOKAL should be fastened with the included bolts. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON VOKAL we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON VOKAL.The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter.Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house,DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON VOKAL woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON VOKAL are heated in a process that allows us to press it into an organic shape.This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 6Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 50 - 300Crossover Frequency [Hz] : 2,750 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mm Hybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 46.5Connection Input : Bi-Amping (INT) Recommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : > 5Dimensions With Base (HxWxD) [mm] : 247 x 816 x 349Weight [kg] : 18.4Accessories Included : Connectors Damper Feet Manual Micro Fibre Cloth 

Turn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. GOLD PLATED TERMINALSEngineered by DALI for ultra low contact resistance, durability and mechanically sturdy construction. High quality gold-plated binding posts. PRODUCT DETAILSTurn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the DALI EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy.We have developed an uncompromising center speaker for all of you multi-channel fans - the DALI EPICON VOKAL. Incorporating 2 x 6½” woofers along with the hybrid tweeter module this speaker promises the same level of transparency and timbre matching with the rest of the series.The EPICON VOKAL will match any of the three main loudspeakers, and it will benefit any setup where the realism and realistic sound pressures are required. Common to all the EPICON loudspeakers is that they work well in both 2.0, 2.1, 5.1 or other multichannel systems.50% of the acoustic energy in a normal movie comes from the center channel. The EPICON VOKAL is up to the real challenge. Meticulous timbre matching and the same ability to render finer details exactly the way they were recorded is an EPICON trademark. Here, e.g. the effortless reproduction of human voices is what sets DALI EPICON VOKAL apart.Note: To mount the EPICON VOKAL securely on the EPICON Stand, the VOKAL should be fastened with the included bolts. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON VOKAL we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON VOKAL.The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter.Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house,DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON VOKAL woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON VOKAL are heated in a process that allows us to press it into an organic shape.This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 6Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 50 - 300Crossover Frequency [Hz] : 2,750 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mm Hybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 46.5Connection Input : Bi-Amping (INT) Recommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : > 5Dimensions With Base (HxWxD) [mm] : 247 x 816 x 349Weight [kg] : 18.4Accessories Included : Connectors Damper Feet Manual Micro Fibre Cloth 

Turn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. GOLD PLATED TERMINALSEngineered by DALI for ultra low contact resistance, durability and mechanically sturdy construction. High quality gold-plated binding posts. PRODUCT DETAILSTurn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the DALI EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy.We have developed an uncompromising center speaker for all of you multi-channel fans - the DALI EPICON VOKAL. Incorporating 2 x 6½” woofers along with the hybrid tweeter module this speaker promises the same level of transparency and timbre matching with the rest of the series.The EPICON VOKAL will match any of the three main loudspeakers, and it will benefit any setup where the realism and realistic sound pressures are required. Common to all the EPICON loudspeakers is that they work well in both 2.0, 2.1, 5.1 or other multichannel systems.50% of the acoustic energy in a normal movie comes from the center channel. The EPICON VOKAL is up to the real challenge. Meticulous timbre matching and the same ability to render finer details exactly the way they were recorded is an EPICON trademark. Here, e.g. the effortless reproduction of human voices is what sets DALI EPICON VOKAL apart.Note: To mount the EPICON VOKAL securely on the EPICON Stand, the VOKAL should be fastened with the included bolts. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON VOKAL we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON VOKAL.The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter.Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house,DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON VOKAL woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON VOKAL are heated in a process that allows us to press it into an organic shape.This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 6Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 50 - 300Crossover Frequency [Hz] : 2,750 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mm Hybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 46.5Connection Input : Bi-Amping (INT) Recommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : > 5Dimensions With Base (HxWxD) [mm] : 247 x 816 x 349Weight [kg] : 18.4Accessories Included : Connectors Damper Feet Manual Micro Fibre Cloth 

Turn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. GOLD PLATED TERMINALSEngineered by DALI for ultra low contact resistance, durability and mechanically sturdy construction. High quality gold-plated binding posts. PRODUCT DETAILSTurn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the DALI EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy.We have developed an uncompromising center speaker for all of you multi-channel fans - the DALI EPICON VOKAL. Incorporating 2 x 6½” woofers along with the hybrid tweeter module this speaker promises the same level of transparency and timbre matching with the rest of the series.The EPICON VOKAL will match any of the three main loudspeakers, and it will benefit any setup where the realism and realistic sound pressures are required. Common to all the EPICON loudspeakers is that they work well in both 2.0, 2.1, 5.1 or other multichannel systems.50% of the acoustic energy in a normal movie comes from the center channel. The EPICON VOKAL is up to the real challenge. Meticulous timbre matching and the same ability to render finer details exactly the way they were recorded is an EPICON trademark. Here, e.g. the effortless reproduction of human voices is what sets DALI EPICON VOKAL apart.Note: To mount the EPICON VOKAL securely on the EPICON Stand, the VOKAL should be fastened with the included bolts. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON VOKAL we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON VOKAL.The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter.Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house,DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON VOKAL woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON VOKAL are heated in a process that allows us to press it into an organic shape.This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 6Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 50 - 300Crossover Frequency [Hz] : 2,750 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mm Hybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 46.5Connection Input : Bi-Amping (INT) Recommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : > 5Dimensions With Base (HxWxD) [mm] : 247 x 816 x 349Weight [kg] : 18.4Accessories Included : Connectors Damper Feet Manual Micro Fibre Cloth 

Stand mount for the EPICON 2 - if you dream of fantastic sound experiences the EPICON 2 is the perfect escape. Don’t be fooled by the size of the speaker – the most diminutive in the EPICON family. PRODUCT DETAILSThe solid and sleek EPICON STAND has been designed exclusively for the EPICON 2 and EPICON VOKAL, which includes the design as well as the construction.The EPICON stand is developed with focus on stability and elimination of vibrations, and the height is fitted according to the ideal listening position.The stand base is molded in die-cast zinc to add gravity, while the stand pole and mounting plate is done in aluminium. The inside of the pole is reinforced in a rigid grid formation to avoid distorting vibrations and with the possibility of hidden wiring.Furthermore a rubber membrane separates the mounting plate from the stand pole to reduce the transmission of vibrations.(Loudspeaker is not included)Note: To mount the EPICON 2's or VOKAL securely on the EPICON Stand, they should be fastened with the included bolts. Specifications :Dimensions (HxWxD) [mm] : 531 x 275 x 401Weight Stand Mounted [kg] : 10.4

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm.The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home.absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves.The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses. The loudspeaker is the result of a passionate, tireless quest to reach perfection.There are musical experiences in life so epic that you wish they would never end. Moments so wonderfully overpowering the very thought of them makes your heart tremble, your mind go wandering and your ears yearn for more. With the new, awe inspiring DALI EPICON 8 loudspeaker you can relive that sensation, again and again.Prepare yourself for musical indulgence like never before – and for a beautifully statuesque design your guests will envy. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 50 - 500Crossover Frequency [Hz] : 550 / 3,100 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome  Midrange driver, Quantity : 1 x 6½"Midrange driver, Diaphragm type : Wood Fibre Cone Low frequency driver, Quantity : 2 x 8"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 28.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : FloorRecommended Distance From Wall [cm] : > 35Dimensions With Base (HxWxD) [mm] : 1262 x 353 x 497Dimensions (HxWxD) [mm] : 1225 x 264 x 485Weight [kg] : 47.5Accessories Included : Base Manual Micro Fibre Cloth Rubber Pads Spikes M10 Terminal Links  

The DALI SPEKTOR 2 packs a larger inner volume than the SPEKTOR 1 and thereby delivers an extra bass performance. Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and knowhow, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.The compact SPEKTOR 2 - and its slightly smaller sibling SPEKTOR 1 - are ideal for wall mounting, shelf or stand positioning in combination with any compact Hi-Fi music system. The SPEKTOR 2 will also find itself at home in any surround position, helping you get that fully immersive movie experience.The DALI SPEKTOR 2, like all DALI loudspeakers, has been designed in accordance with our fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live music experience.Frequency range 54 - 26000Sensitivity (dB) 84,5Impedance Ω 6Maximum SPL (dB) 105LW Recom.Power(Watt) 25 - 100High Frequence drivers 25mm Soft DomeLow Frequency drivers 1 x 5¼" Wood Fibre ConeDimmension(HxWxD) cm 29,2 x 17,0 x 23,8

The DALI SPEKTOR 2 packs a larger inner volume than the SPEKTOR 1 and thereby delivers an extra bass performance. Getting this much Hi-Fi performance from a speaker in this price range not only took all of our experience and knowhow, but also hours and hours spent in the listening room, improving the driver and crossover designs to create the perfect audio performance.The compact SPEKTOR 2 - and its slightly smaller sibling SPEKTOR 1 - are ideal for wall mounting, shelf or stand positioning in combination with any compact Hi-Fi music system. The SPEKTOR 2 will also find itself at home in any surround position, helping you get that fully immersive movie experience.The DALI SPEKTOR 2, like all DALI loudspeakers, has been designed in accordance with our fundamental acoustic and electro-acoustic principles, and a strong belief that clarity and an authentic, honest sound reproduction will get you even closer to the full impact of a live music experience.Frequency range 54 - 26000Sensitivity (dB) 84,5Impedance Ω 6Maximum SPL (dB) 105LW Recom.Power(Watt) 25 - 100High Frequence drivers 25mm Soft DomeLow Frequency drivers 1 x 5¼" Wood Fibre ConeDimmension(HxWxD) cm 29,2 x 17,0 x 23,8