Focusrite

DescriptionScarlett 18i16 is the complete compact studio hub for all your instruments and outboard gear. Perfect for producers, 18i16 is equipped with enough I/O to connect all your studio gear. Four of our most detailed ultra-low-noise mic preamps. Hi-Z, line, and MIDI connections for your guitars, keys, synths, grooveboxes, and controllers. With 18i16 your headphones, monitors, and line outs each get their own mix, so you can match the studio setup to the session. Expand your channel count using the S/PDIF or ADAT connections.Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Auto Gain and Clip Safe make sure you'll never need to worry about your levels. The Hitmaker Expansion software bundle has all the tools you need to record, produce, and release your tracks. And the Focusrite Control 2 desktop and mobile apps enable you to remotely control your Scarlett anywhere in the studio. 18i16 can be powered directly from a computer's USB-C port (3A), so no extra power supply is needed.Producers. This is your Scarlett.Four of our most detailed, ultra-low-noise preamps.Plug into 18i16’s 4th-Generation remote-controlled preamps — Scarlett’s most transparent and detailed ever. 69dB of gain range provides all of the headroom you'll need to get the best result from the most dynamic performances. Control preamp levels from anywhere in the studio using the Focusrite Control 2 apps, giving you the freedom to adjust settings remotely.Auto Gain and Clip Safe.Let 18i16 handle your levels. Auto Gain sets your levels and Clip Safe keeps them in the sweet spot, automatically tweaking the gain if you’re in danger of clipping. You'll never lose a take again.

DescriptionScarlett 16i16 is a compact, all-in-one studio hub for your instruments and outboard gear. Ideal for artists and producers, 16i16 is equipped with enough I/O to connect all your studio gear. Two of our most detailed ultra-low-noise mic preamps. Hi-Z, line, and MIDI connections for your guitars, keys, synths, grooveboxes, and controllers. With 16i16 your headphones, monitors, and line outs each get their own mix, so you can match the studio setup to the session. Expand your channel count using the S/PDIF or ADAT connections.Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Auto Gain and Clip Safe make sure you'll never need to worry about your levels. The Hitmaker Expansion software bundle has all the tools you need to record, produce, and release your tracks. And the Focusrite Control 2 desktop and mobile apps enable you to remotely control your Scarlett anywhere in the studio. 16i16 can be powered directly from a computer's USB-C port (3A), so no extra power supply is needed.Artists and producers. This is your Scarlett.Two of our most detailed, ultra-low-noise preamps.Plug into 16i16’s 4th-Generation remote-controlled preamps — Scarlett’s most transparent and detailed ever. 69dB of gain range provides all of the headroom you'll need to get the best result from the most dynamic performances. Control preamp levels from anywhere in the studio using the Focusrite Control 2 apps, giving you the freedom to adjust settings remotely.Auto Gain and Clip Safe.Let 16i16 handle your levels. Auto Gain sets your levels and Clip Safe keeps them in the sweet spot, automatically tweaking the gain if you’re in danger of clipping. You'll never lose a take again.

How do you get the broadcast sound your podcast deserves? The answer has never been clearer. Get incredible sound with more than enough gain for any XLR mic ? for you and a guest. Capture the conversation in the studio, over the phone or online. Set levels, enhance your sound with one click, and stand out with Vocaster Two in seconds. Get your podcast sounding pro with Auto Gain, Enhance, two mic and two headphone connectors, Bluetooth audio from your phone, and more.Key FeaturesBroadcast-quality sound — Get studio sound in seconds from Vocaster's high quality mic input and microphone.Over 70dB of gain — Get the best out of any mic, no booster needed.Auto Gain — Set your level in seconds, just push the button, start talking, and let Auto Gain do the rest.Enhance — Select one of three podcaster-approved presets and reveal the true quality of your voice.Two mics, two headphones — Vocaster Two gives both presenters their own headphone output and Show Mix.Mute — Just hit the button and cut out coughs, sneezes and any other unwanted interruptions.Bluetooth Phone Connectivity — Connect your phone via Bluetooth or with a single TRRS cable and capture the whole conversation, or play music and other high quality audio from your device straight onto your show.Camera Connectivity — Send Vocaster's high quality audio straight to your camera with a single TRS cable and level-up your vlog.Stereo Loopback — Grab audio from your computer and stream straight onto your show. Great for intros, outros, music and more.Easy Start — It's never been easier to get recording. Focusrite's tried-and-tested Easy Start tool will have you on air in minutes.All the tools you need — Includes Hindenburg Lite, and six months of Acast Influencer.Vocaster Hub — Set your levels, enhance your sound, route audio from your phone and computer, and hear your Show Mix.

Scarlett 4i4 is the complete compact studio hub for all your instruments. Perfect for multi-instrumentalists and collaborators, 4i4 is loaded with I/O for everything. Two of our most detailed ultra-low-noise mic preamps. Hi-Z, line and MIDI connections for your keys, guitars, synths, grooveboxes and controllers. With 4i4 your headphones, monitors, and line outs each get their own mix, so you can match the studio setup to the session. Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Auto Gain and Clip Safe make sure you'll never need to worry about your levels. And the Hitmaker Expansion software bundle includes all the tools you need to record, produce and release your tracks.Bringing big studio sound to wherever you make music. Studio-grade converters, with a huge 120dB dynamic range deliver the audio performance you'd find in a pro studio. Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Solo’s amped-up headphone output with independent volume control drives your favourite headphones loud and clear.

Scarlett 2i2 Studio is everything you need to record your music to release-ready standards. Hook up the CM25 MkIII condenser microphone to our most detailed ultra-low-noise mic preamps. Plug guitars straight in to 2i2's Hi-Z inputs. Connect keys and synths to the super-high-quality line ins. Then listen in detail with the SH-450 headphones. Two of our most detailed ultra-low-noise mic pres. Hi-Z and super-high-quality line inputs for guitars, keys and synths. Bringing big studio sound to wherever you make music, Scarlett 2i2 makes it easier than ever to record and release your songs. Perfectly crafted for today's music makers, just plug in, record, and produce finished tracks with the best sound you've ever had.Studio-grade converters, with a huge 120dB dynamic range deliver the audio performance you'd find in a pro studio. Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Solo’s amped-up headphone output with independent volume control drives your favourite headphones loud and clear. Need software? The Hitmaker Expansion software bundle includes all the tools you need to record, produce and release your tracks.

The original studio-quality 2-in, 2-out interface, has been remastered for the artist. Two of our most detailed ultra-low-noise mic pres. Hi-Z and super-high-quality line inputs for guitars, keys and synths. Bringing big studio sound to wherever you make music, Scarlett 2i2 makes it easier than ever to record and release your songs. Perfectly crafted for today's music makers, just plug in, record, and produce finished tracks with the best sound you've ever had.Studio-grade converters, with a huge 120dB dynamic range deliver the audio performance you'd find in a pro studio. Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Solo’s amped-up headphone output with independent volume control drives your favourite headphones loud and clear. Need software? The Hitmaker Expansion software bundle includes all the tools you need to record, produce and release your tracks.

Bringing big studio sound to wherever you make music, Scarlett Solo makes it easier than ever to record and release your songs. Perfectly crafted for today's music makers, just plug in, record, and produce finished tracks with the best sound you've ever had. Scarlett Solo Studio is everything you need to make your first hit record, right now. Connect the CM25 MkIII studio condenser mic to Solo’s detailed, ultra-low-noise mic pre and it sounds great right away. Plug a guitar into the Hi-Z instrument input, it feels just like an amp. Then listen in stunning clarity with the SH-450 headphones.Studio-grade converters, with a huge 120dB dynamic range deliver the audio performance you'd find in a pro studio. Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Solo’s amped-up headphone output with independent volume control drives your favourite headphones loud and clear. Need software? The Hitmaker Expansion software bundle includes all the tools you need to record, produce and release your tracks.

Bringing big studio sound to wherever you make music, Scarlett Solo makes it easier than ever to record and release your songs. Perfectly crafted for today's music makers, just plug in, record, and produce finished tracks with the best sound you've ever had. Hook a mic up to Solo’s detailed mic pre and it sounds great right away. Plug your guitar into the high-headroom Hi-Z instrument input, it feels just like an amp.Studio-grade converters, with a huge 120dB dynamic range deliver the audio performance you'd find in a pro studio. Air mode, with Presence and Harmonic Drive, gives you that big console sound wherever you record. Solo’s amped-up headphone output with independent volume control drives your favourite headphones loud and clear. Need software? The Hitmaker Expansion software bundle includes all the tools you need to record, produce and release your tracks.

Scarlett interfaces sit at the heart of more music-making, recording and production spaces than any other range, and 18i20 is Scarlett’s most versatile interface. The rack-mountable 3rd Generation 18i20 gives you 18 inputs and 20 outputs of incredible sound quality. Enough to make any space into a fully-fledged recording studio. SUPPORTED SAMPLE RATES 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz MICROPHONE INPUTS Frequency Response: 20Hz - 20kHz ± 0.1dB Dynamic Range: 111dB (A-weighted) THD+N:  INSTRUMENT INPUTS Frequency Response: 20Hz - 20kHz ± 0.1dB Dynamic Range: 110dB (A-weighted) THD+N:  HEADPHONE OUTPUTS Dynamic Range: 104dB (A-weighted) THD+N: 

High-quality 24-bit / 192kHz USB (TypeC) audio interface (3rd Generation). Inputs 4x TRS / XLR mic and 4X TRS with improved Focusrite, AIR switch, phantom power 48v, direct monitoring, SPDIF, Optical input and MIDI IN / OUT preamplifiers. 4 Jack outlets and 2 headphone outputs with volume control. Metal platinum rotary knobs. Super Low Latency. Visual indication of the input signal (green, orange, red) at the input of each channel. The monitoring system has listening possibilities from the direct incoming signal to the fully processed track that goes to the speakers. The package includes ProTools First, Ableton Live Lite, 2GB Loopmasters sample content, Focusrite RED Plug-in Suite, plug-in collector, XLN Audio Addictive Keys, softube time and tone bundle. Ideal for home / project studio. Weight 1.3Kgr.

Playing a part in the production of more tracks than any other audio interface in history, Scarlett makes turning your musical vision into sonically pristine reality totally hassle-free. For Scarlett 3rd Gen, we’ve added our best-ever Scarlett mic preamps, additional fixed line inputs, refined monitoring features and enhanced performance, ensuring professional-quality recording results every time. The Scarlett 3rd Gen line-up comprises six interfaces: Solo, 2i2, 4i4, 8i6, 18i8 and 18i20, plus two Studio bundles – Solo Studio and 2i2 Studio. Whether you’re looking to perfectly capture every nuance of your guitar and vocals, or bring together your studio’s ever-expanding array of synths, drum machines, outboard and effects, there’s a model in the Scarlett 3rd Gen range for you. With its exceptional design and rock-solid build quality, Scarlett is already loved by guitarists, singer-songwriters, electronic musicians and engineers as a truly versatile and reliable recording solution – but Scarlett 3rd Gen takes every element of it a step further… OUR BEST SCARLETT PREAMPS EVER Focus on your music without worrying about your recordings. Feeding into class-leading 24-bit/192kHz converters, the Scarlett 3rd Gen mic preamp is high in gain, low in noise and supremely transparent. We’ve been making preamps for 30 years, and our decades of experience mean Scarlett sounds just like you.   THERE'S SOMETHING IN THE AIR Activate the Air circuit on Scarlett 3rd Gen’s upgraded mic preamps to make your guitars and vocals sound instantly brighter and more spacious, giving them a lustrous sheen that can make all the difference in the mix. Air emulates the technology of the same name from our legendary ISA preamp – just ask your local hit record producer how big a deal that is.   I/OS AND HALOS From the compact 2i2’s two inputs and two outputs, to the rack-mount 18i20’s immense 18 analogue and ADAT digital inputs, and 20 outputs, Scarlett 3rd Gen caters to all I/O requirements, no matter how simple or expansive. You get instrument inputs with sky-high headroom, ultra-clean balanced line level inputs, balanced TRS outputs for doing away with speaker hum, headphone outputs (two of them with the 8i6, 18i8 and 18i20), and MIDI I/O for hooking up external synths. Focusrite’s signature Gain Halos, meanwhile, light up around gain knobs to indicate input levels, making monitoring visually intuitive and guaranteeing distortion-free recordings. FAST AND EASY No audio interface is easier to get up and running with than Scarlett 3rd Gen. The QuickStart tool speeds you through registration and setup, while USB-C connectivity lets you plug into your laptop whenever and wherever the recording muse takes you, with latency so low you won't even notice it.   FULL CONTROL Take command of your Scarlett 3rd Gen interface from your Mac®, PC, iPad®, iPhone® or iPod touch®. Our Focusrite Control application makes light work of audio and cue routing, monitor mixing and more.   THE PERFECT PACKAGE Every Scarlett 3rd Gen interface comes with a package of software tools to start you on your recording and production journey, including two comprehensive digital audio workstations – Ableton® Live Lite™ and Pro Tools® First Focusrite Creative Pack – Softube’s Time and Tone Bundle; Focusrite’s Red Plug-in Suite; and a choice of one of four of XLN Audio’s Addictive Keys virtual keyboard instruments. Additionally, the Solo Studio and 2i2 Studio bundles also include the CM25 MkIII condenser microphone, an XLR cable, and the HP60 MkIII closed-back headphones – literally everything you need to make pro-quality recordings right out of the box. As with all Focusrite products, registering your Scarlett 3rd Gen automatically makes you a member of our Plug-in Collective, offering free software downloads every couple of months and generous discounts, as well as a two-year warranty and award-winning customer support. Let’s stay together! Check out the Scarlett 3rd Gen product pages for in-depth information on each interface.

The Scarlett OctoPre Dynamic comprises eight natural sounding, low noise preamps with plenty of gain; eight line inputs and two high headroom instrument inputs, coupled with high quality digital  conversion to ADAT format. You can now expand your studio set-up or live rig by adding Focusrite quality mic preamps and conversion to any interface with ADAT I/O.The Scarlett OctoPre Dynamic has both digital and analogue outputs: in addition to dual ADAT optical ports it also provides a balanced line output from each channel, enabling you to connect it directly to any analogue device.Features:8-channel mic/line preamp expansion with ADAT I/O8 x 2nd-generation Scarlett mic/line presPer-channel soft-knee VCA compression8 line outputs: fed directly from the mic inputs or sourced from ADAT inputUp to 24-bit/192kHz AD/DA for high-resolution audioADAT I/O to expand any ADAT-equipped interfaceMic pres and rear-panel instrument inputs engineered with generous headroom5-segment LED metering and channel clip indicators48-volt phantom power available across all inputs (switchable: 1-4, 5-8) 

Scarlett OctoPre gives you eight additional inputs. It's the ideal way to expand your Scarlett - or any other interface with an ADAT input.Scarlett OctoPre features eight 2nd Generation Scarlett mic inputs - balanced line inputs too - all running through Focusrite precision 24-bit conversion at up to 192 kHz resolution with 109dB dynamic range.Two high-headroom instrument inputs will handle high output guitar pickups and are right there on the front panel for easy access. With high-headroom inputs and a pad on every channel, Scarlett OctoPre is ideal for tracking drums as well guitars, keyboards, vocals - and more.Eight balanced line outputs, sourced directly from the inputs allow Scarlett OctoPre to be used in a live situation whilst capturing the recording via the digital ADAT output. ADAT is a simple and easy way of expanding your analogue inputs. ADAT uses inexpensive "light-pipe" optical cables to carry up to eight channels of audio. Just connect the ADAT output on the OctoPre to the ADAT input on your interface, set your sample rate and clock source and you're ready to go. ADAT input is available on many Focusrite and third-party interfaces.If you need more inputs as well as more outputs check out the Scarlett OctoPre Dynamic - everything you see here, plus eight channels of pristine D-A conversion and analogue compression on every input. It might be just what you're looking for.​

RedNet D64R provides the link between a Dante Ethernet-based audio system and any MADI / AES10 setup. D64R supports up to 64 channels of both coaxial and optical MADI interfaces and is completely bi-directional, allowing the use of any Dante components including RedNet’s high quality interface products with a MADI system – or MADI components with a Dante system. D64R features a sample rate converter (SRC) on each input and output allowing interfacing between MADI and Dante irrespective of the sample rate at which either system is operating. Connect a Dante network to MADI-based digital consoles, computer cards, converters and much more. In addition to both coax and optical MADI interfaces, RedNet D64R provides Word Clock in and out. The D64R features a rugged, roadworthy exterior and high internal build quality, with Ethernet and power supply redundancy. In addition, it offers a compact 1U rack-mount form factor for a full 64 channels of I/O. Features:Connects a MADI system and a Dante network seamlessly together. Connect Dante to digital mixing consoles, interfaces and cards that use MADI; or extend a MADI system with RedNet’s versatile, superb-quality audio interfaces and connectivity – or any other Dante compatible devices.Built-in redundancy with dual locking power and etherCON network connectors.Supports both coax and optical interfaces – connect simply to any MADI equipment.Slave either the Dante system or MADI streams to an external clockSupports up to 64 channels of digital audio I/O at standard sample rates (44.1/48kHz) from a MADI system, 32 channels at 96kHz and 16 at 192kHz.Sample rate conversion (SRC) on each input and output, allowing MADI and Dante systems to operate simultaneously at different sample rates.Simple 1U rack-mount module with the classic red aluminium faceplate.RedNet Control and Dante software allow remote routing and control from the audio computer system via a software control panel – no hardware patching required.​Specifications:Computer Connectivity: IP NetworkForm Factor: RackmountSimultaneous I/O: 64 x 64Digital Inputs: 1 x BNC (MADI Coaxial), 1 x Optical (MADI)Digital Outputs: 1 x BNC (MADI Coaxial), 1 x Optical (MADI)Clock I/O: 1 x Word Clock (In), 1 x Word Clock (Out)Data I/O: 2 x etherCON EthernetRack Spaces: 1U

A valuable addition to Focusrite’s RedNet range of audio-over-IP interfaces, RedNet AM2 is a compact, flexible Dante-compatible stereo monitoring unit combining headphone and line outputs for monitoring of signals from the Dante network wherever required. RedNet AM2 features a ¼" front-panel TRS headphone socket plus a pair of rear-mounted balanced line outputs with male XLR connectors for loudspeaker monitoring and other applications.Designed to drive high or low impedance headphones at high levels, the headphone output delivers significant audio output power. The compact unit, mounted in an enclosure based around a sturdy road-worthy aluminium extrusion, is fitted with non-slip feet, and can either sit securely on a flat surface or be mounted on top of a mic stand using the standard threaded bush incorporated in the base.RedNet AM2 includes the latest two-channel Dante receiver and provides high-quality digital to analogue conversion at up to 96kHz for accurate monitoring on loudspeakers or headphones. Two large volume control knobs are provided for Headphone and Line output levels, the latter featuring a mute button with associated LED. Other indicators show the presence of power, network and signal level.Dual locking etherCON connectors are included to connect the network and to daisy-chain to additional network devices. The unit is powered via Power over Ethernet (PoE) or via the rear-panel barrel connector and included DC power supply. Features:Cost-effective headphone/loudspeaker stereo monitoring solution for Dante offers lower system deployment costsSuperb digital to analogue conversion at up to 96kHz provides transparent and accurate audio qualityPowerful headphone amp delivers plenty of level even with high-Z headphones for maximum high-quality audibilityIndependent headphone/line output level controls for maximum controlLine output mute switch instantly kills the signal to external speakers or power ampsIntegrated Gigabit Ethernet switch allows connection of a second device for simpler cablingBuilt-in mic stand mount plus non-slip feet – mount RedNet AM2 to a mic stand or place securely on a surface​Specifications:Computer Connectivity: DanteForm Factor: DesktopSimultaneous I/O: 2 x 2Analog Outputs: 2 x XLR, 1 x 1/4" (headphones)Digital Inputs: 2 x EtherCON DantePower Supply: Power over Ethernet or 12V DC power supplySample Rate: 44.1kHz - 96kHzManufacturer Part Number: AM2​​

RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output. RedNet A8R offers high quality 192kHz/24-bit A-D and D-A digital conversion with up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network.RedNet A8R provides 24-bit conversion at 44.1, 48, 88.2, 96, 176.4 and 192kHz sample rates (remotely-selectable) and includes pull-up/down capability. Electronically-balanced analogue audio I/O is provided on DB25 connectors wired to AES59 specifications. Internal signals are balanced throughout. Inputs and outputs are remotely configurable for 0dBFS= +18dBu or +24dBu signal levels. In addition, two channels of AES/EBU I/O are provided on XLR connectors, with sample rate conversion on the input. The clock source for the unit may be internal, or external via Word Clock or DARS (via the XLR input). RedNet A8R also outputs Word Clock.RedNet A8R features power and network redundancy, with two separate universal (100–240V) PSUs, which include IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors. These ports can be configured remotely to Redundant or Switched (daisy-chain) mode.Specifications:Eight channels of high-quality line-level analogue I/O24-bit precision Focusrite conversion up to 192kHz119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dBInternally balanced throughoutDante-based remote-controlled audio-over-IP connectivityDual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliabilityWord Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU I/OAnalogue I/O to AES59 standard on DB25 connectorsComprehensive front-panel indicatorsSoftware-based routing and control – no hardware patching required

RedNet 1 connects to your network with a single Ethernet cable. It’s remotely controlled via the network and can be placed anywhere in your facility. It offers eight channels of line-level analogue in and out, with Focusrite’s precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz.\The rear panel includes standard DB25 connectors for analogue patchbay or breakout cable interfacing.RedNet 1 can be used simply as a means of converting 8 channels of audio and delivering it somewhere else on the network at near-zero latency. If you need to connect RedNet 1 to your computer there are three methods:The RedNet PCIe card for Core Audio and ASIO applications such as Logic and Nuendo RedNet 5 for Pro Tools HD, Pro Tools HDX and Pro Tools HD Native via DigiLink connectorsDirectly to your computer’s Ethernet port using a standard Ethernet cable (with “Dante Virtual Soundcard”)​Specifications:Reliable, robust digital audio networking for the studio24-bit operation at up to 192kHz sampling rateUp to 128 inputs and 128 outputs at 48 and 96kHzSuperb audio quality with a dynamic range of 119dBProven Dante networking technology uses standardnetworking componentsJetPLLTM technology provides ultra-low-jitter in all I/O unitsUnits are hot-swappable, detected and configured automaticallyon plug-inRedNet 1 Features:Dynamic Range: 119dBTHD+Noise (input and output)

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.Features:Eight high-quality Focusrite 'RedNet' mic preampsDC-coupled signal path for characteristically open and transparent sound Selectable line and DI inputs for input flexibilityRemote-controllable Gain, Phantom Power and High-Pass Filter from Yamaha CL and QL Series Consoles.Dynamic range: 119dB THD+Noise:

The Focusrite iTrack Pocket iOS interface makes creating HD videos for YouTube easy, with outstanding sound quality that will set your video apart.  The iTrack Pocket captures rich stereo sound from its built-in microphones, or from the guitar input that's ready for your instruments. You even get a slew of realistic amplifier models via the Focusrite Impact app, making the Focusrite iTrack Pocket an appropriate iPhone recording solution for any guitarist. The iTrack Pocket is compatible with iPhone 5, iPhone 5C, iPhone 5S, iPhone 6, and iPhone 6 Plus..Features:Stereo audio interface for iPhone with Lightning connectorPerfect for recording HD video on your phone with exceptional sound qualityPowered by your iPhone for true portabilityGuitar input for recording your instrumentsIdeal for singer/songwriter videosSpecifications:Computer Connection: iOS (Lightning)Form Factor: PocketSimultaneous I/O: 2 x 0Built-in DSP/FX: YesAudio Inputs: 1 x 1/4"Bus Powered: YesDepth: 1.57"Width: 4.88"Height: 1.69"Weight: 0.4 lbs.

Plug ins collection in PRO TOOLS enviroment, with FOCUSRITE algorithm (ISA 110 & ISA 130). Includes plug ins: ISA 110 Equalizer, ISA 130 Multichannel Surround Compressor, ISA 130 Expander, ISA 130 Gate, ISA 130 De-esser.

Focusrite ISA Two - 2-channel preamp, Lundahl LL1538 mic input transformer, Variable input impedance, Up to 80 dB of gain, Variable cut-off high-pass filter, 2x Mic In XLR, 2x Line-In 1/4" TR, 2x Instrument In 1/4" TR, Insert, Line output XLR, switchable impedance, LED meter, 48V phantom power, 19" 1HE

The ISA828 eight-channel microphone preamplifier provides eight original ISA transformer-based preamps in a single robust 2U chassis, offering the Focusrite signature sound at its lowest cost per channel to date. Eight ISA series transformer-based preampsNew eight-channel 192kHz A-D converter Convenient 25 pin D-type connectors Switchable impedanceDirect instrument inputsInserting available on every channel High pass filter, phase reverse and phantom power Six LED input meter

The ISA microphone pre-amplifier was first introduced back in 1985. This transformer-based pre-amplifier formed the first half of the ISA110 mic-pre and EQ module on Focusrite's critically acclaimed Forte console. This console, and the later Studio console were hailed by many as the finest sounding consoles ever built. The ISA microphone pre-amplifier went on to form the cornerstone of all ISA and RED Focusrite products.  The topology has never changed, except for the addition of a variable impedance circuit, allowing ISA users to either perfectly match the pre-amp with any microphone, thus maximizing level, or to use different settings creatively to shape the sound of the microphone being used. The original ISA110 setting was supplemented by three further impedance settings. The Focusrite pre amp is renowned for its transparency, but there's also that subtle warmth that transformer core saturation contributes. This seeming contradiction of warmth plus beautifully open, unrestricted high frequencies, is a classic hallmark of the mid 80's Focusrite designs.           FEATURESISA Series Transformer-based Pre-amplifier Flexible Independent D.I. Channel Switchable Impedance Optional Stereo 192kHz ADC Rugged Custom Flight Case Headphone Output with Volume Control Dedicated Insert Point

Powerful Studio-Grade 18-IN / 20-Out Audio Interface For The Established Producer Clarett+ 8Pre is a high-performance and immensely capable studio centrepiece for PC and Mac, which inspires producers, engineers and artists to create their best work. Eight  High-Performance Clarett+ Preamps Eight high-headroom, low-noise, low-distortion Clarett+ mic preamps — featuring All-analogue Air with impedance switching and relay control — capture vocals, drums and acoustic instruments with precise clarity. Two JFET instrument inputs preserve the natural tone of guitars, just like plugging into an amplifier. New And Improved A-D And D-A Converters Independent A-D and D-A converters bring recording artists closer than ever to their music, with extremely wide dynamic range, low noise and low distortion. Greatly improved D-A dynamic range brings every detail into focus, so engineers and producers can embrace no-compromise audio quality in abundance. Incredibly low A-D converter distortion lets you capture signals with more clarity, for greater transparency and sonic accuracy. Two powerful and transparent headphone outputs inspire artists to hear every nuance of their sound on any type of headphones, customise their foldback mix, and perform their best.  Anything, Anywhere Whether you’re multi-tracking a drum kit or connecting to synths and outboard equipment, Clarett+ 8Pre lets you constantly develop your musical ideas while always maintaining analogue purity and extreme audio clarity. Expand via ADAT to add eight inputs and outputs using Clarett OctoPre, and connect to MIDI and S/PDIF equipment to maximise your creative potential. Hitmaker Expansion Create studio quality vocals, powerful guitars, luscious keys and huge drums, then mix and master with iconic Focusrite studio hardware – all in the box. Every new Scarlett 3rd Gen, Clarett and Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business. Hitmaker Expansion – available with every Scarlett 3rd Gen, Clarett+, Clarett USB and Red interface purchased and registered on or after October 1st 2021 – is built to get you creating records immediately. These are all the plug-ins you need to write, produce, mix and master your music in studio quality. Hitmaker Expansion features exclusive content from legendary Auto-Tune® creators Antares®, along with Brainworx®, Softube®, XLN Audio®, Relab and more. Emulate Iconic Focusrite Hardware Get the full Focusrite sound with three classic processors from Focusrite’s 40 year legacy of precision studio sound. Brainworx bx_console Focusrite SC is an authentic emulation of the classic ISA 110 module found in Focusrite Studio Console. ISA 110 was created when Sir George Martin asked Rupert Neve for custom modules for AIR Montserrat studios. The Red 2 & Red 3 Plug-in Suite accurately models Focusrite’s classic Red range equaliser and compressor hardware. Coveted by producers and engineers for their exceptional clarity and versatility, the original Red 2 and Red 3 remain prized fixtures in professional recording studios the world over. Now, you can use these revered pieces, easily and flexibly, in your own mixes.

64X64 ALL-IN-ONE INTERFACE, 32X32 DANTE I/O Red 16Line is a 64-in/64-out Pro Tools | HD and dual Thunderbolt 3 audio interface with ultra-low latency A-D/D-A conversion, Red Evolution mic preamps, up to 121dB dynamic range, ultra-low round trip latency, and expansion over Ethernet for networked audio. Since Red 16Line provides both DigiLink™ connectors and Thunderbolt connections, it's now easier than ever to switch from Pro Tools | HD to a second DAW, without the need to reconfigure option cards in the interface. Simply change the host mode either in the RedNet Control software, or on the device front panel and change DAWs in seconds. The Easiest Way To Work In Pro Tools | HD™ And A Second DAW Since Red 16Line provides both DigiLink™ connectors and Thunderbolt™ connections, it's now easier than ever to switch from Pro Tools | HD™ to a second DAW, without the need to reconfigure option cards in the interface. Simply change the host mode either in the RedNet Control software, or on the device front panel and change DAWs in seconds. Our Best Conversion High-performance audio conversion with over 118dB dynamic range A-D and 121dB dynamic range D-A (A-weighted). These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency in our best-quality audio interface. Revolutionise Your Workflow Red's ultra-low round trip latency completely transforms your workflow. If you're used to having to build two different mixes – one using input monitoring to overdub, the other using the DAW for playback – the good news is that now, one is enough. Build your mix on the DAW and use it whether you're overdubbing (monitoring the input you're recording with the RedNet Control software mixer) or playing back, with all your plug-ins in place, all the time. Extensive Analogue I/O Red 16Line features 16 line inputs on D-sub, coupled with 16 line outputs and two main monitor outputs. Two Of Our Best Preamps The two digitally-controlled Red Evolution mic preamps provide up to 63dB of ultra-clean gain along with stereo linking, individual phantom power, high-pass filter, phase reverse and Air mode: the name we give to the sonic signature of the classic transformer ISA preamp. Networked Audio-Enabled Out Of The Box With dual-port Dante™ connectivity, you will be able to expand your studio over Ethernet for more channels at higher sample rates, anywhere in your network, at lower latency and lower cost. Software Mixer With Hardware-Focused Workflow RedNet Control is our software mixer designed primarily for ease of use in quickly setting up both simple and complex monitoring and routing configurations, together with the ability to control your preamps remotely. The Sound Of Red Across Your Mix Every Red interface comes with our Red 2 and Red 3 EQ and compression plug-ins. AAX/AU/VST-compatible, these plug-ins faithfully reproduce the sonic qualities of the original hardware, allowing you to take advantage of the classic Red sound – the sound of professional recording studios all over the world – across your entire mix. The Focusrite Studio Console Reborn In Your DAW The Focusrite Studio Console defined countless hits of the 80s and 90s, thanks in large part to its ISA 110 Equaliser and ISA 130 Dynamics Modules. Brainworx's bx_console Focusrite plug-in brings you stunningly accurate emulations of both in a single plug-in, perfectly capturing the famously warm, open sound of two of the most revered pieces of studio hardware ever made. Hitmaker Expansion Improve your sound with studio quality vocals, powerful guitars, rich keys and huge drums, then mix and master with iconic Focusrite studio hardware — all in the box. Every new Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business. Hitmaker Expansion — available with every newly registered Red interface — is built to get you mixing and mastering release-ready music immediately. These are all the plug-ins you need to take your studio-quality tracks to the next level and achieve professional results.

58-In, 64-Out Thunderbolt™ 3 Audio Interface With Two Red Evolution Mic Pres, Analogue Line-Level, DigiLink, Dante®, ADAT & S/PDIF Connectivity Red 8Line is a 58-input, 64-output, Thunderbolt™ 3 audio interface that features two Red Evolution mic pres, independent L/R monitor outs, eight balanced line inputs and outputs on DB25 connectors; 32 channels of Dante® I/O; 16-channel ADAT input and output (at 48kHz), and stereo S/PDIF input and output. As with other Red interfaces, it has professional-grade 24-bit/192kHz A-D and D-A conversion for no-compromise recording and audio playback. With 119dB dynamic range A-D and 121dB dynamic range D-A (A-Weighted), the converters have been expertly selected and calibrated by Focusrite to provide the best balance of sound quality, dynamic range and conversion latency. The Focusrite Red range is the best choice for professionals who work in Pro Tools™ | HD and other DAWs — on both Mac and PC. With both mini-DigiLink and Thunderbolt 3 connections, it's possible to instantly switch between Pro Tools and other DAW applications without the need to reconfigure your audio settings. Simply change the host mode either in RedNet Control software, or using the Red 8Line front panel, to change DAWs in seconds. This ability to quickly switch between production environments means you'll never lose that moment of inspiration, or leave your clients waiting. Red 8Line features the latest implementation of Thunderbolt 3, with Focusrite's session-proven, ultra-low-latency, rock-solid Thunderbolt drivers. This speed provides the flexibility to use DAW plug-ins in real time, so you can harness the processing power of your DAW to track through plug-ins and record virtual instruments. With two Thunderbolt 3 ports as standard, it's also possible to daisy-chain Thunderbolt devices, such as third-party plug-in accelerators, hard drives, external 4K displays, processing units and Thunderbolt hubs. On-board Dante connectivity enables Red 8Line to communicate with industry-standard Audio-over-IP equipment from hundreds of manufacturers. Dante makes it easy to expand your system, embrace new ways of working, and discover rapid system expansion using Focusrite RedNet interfaces or devices from third parties such as Neve, Yamaha and DiGiCo. Red 8Line has built-in monitor control for mono, stereo and multi-channel monitoring environments up to 7.1.2. Compatibility with the new Focusrite RedNet R1 desktop remote controller allows even greater flexibility, and customised presets for immersive monitoring environments including Dolby Atmos®. Hitmaker Expansion Improve your sound with studio quality vocals, powerful guitars, rich keys and huge drums, then mix and master with iconic Focusrite studio hardware — all in the box. Every new Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business. Hitmaker Expansion — available with every newly registered Red interface — is built to get you mixing and mastering release-ready music immediately. These are all the plug-ins you need to take your studio-quality tracks to the next level and achieve professional results.

64x64 Premium Audio Interface For Pro Tools | HD™ And Thunderbolt™ 2 Workflows, Featuring Eight Red Evolution Mic Pres And 32x32 Dante™ Audio-Over-IP Connectivity Red 8Pre features both Thunderbolt 2 connectivity and dual mini-DigiLink ports allowing you the best of both Core Audio and Pro Tools | HD workflows. Take Red 8Pre on the road for location recording over Thunderbolt then connect the same interface to Pro Tools|HDX or Pro Tools|HD Native back at the studio for mixdown. Switch easily between Pro Tools | HD and any Thunderbolt-connected DAW with Host Mode. The combination of low-latency conversion and driver technology allows real-time foldback mixes to be created in the DAW while you continue to use your native plug-ins. Unlike many interfaces, both mini-DigiLink and Thunderbolt 2 connectivity comes as standard, so there's no need to buy an additional option card. Eight Red Evolution Mic Pres Focusrite's Red Evolution mic pres draw on many decades of design prowess as well as many of the elements behind the incredibly popular RedNet mic pre used in many studios, broadcast facilities and live performances around the world. The digitally-controlled mic pres deliver a clear and honest sound with very low noise and plenty of gain available for the most-quiet of sources. They can be controlled from the front panel or remotely over Thunderbolt using RedNet Control. Additionally the mic pre settings can be saved and recalled allowing you to quickly re-setup for your next session. They also include our unique 'Air' effect, recreating the sound of the transformer-based mic preamps in the ISA and original Red ranges. When 'Air' is enabled, the microphone impedance is lowered and the sound is given a subtle mid-high boost – all in the analogue domain. Parallel Path Conversion Focusrite has been designing digital converters for over 20 years. From the original Blue 245 and 260 mastering-grade A-D and D-A, through the Liquid Channel and more recently RedNet, digital conversion is a key part of our design heritage and philosophy. Every converter we design starts with the same objectives: low latency, high dynamic range and a flat, wide frequency response. Red 8Pre's conversion achieves just that, lightning fast performance, a dynamic range of 118dB A-D and 121dB D-A and a flat response to 35kHz. By using “parallel path summing" we have achieved even greater noise-performance than ever. Room For Expansion While Red 8Pre has enough I/O for many scenarios, sometimes more is needed. That's why Red 8Pre includes two ADAT ports, for up to 16 additional inputs and outputs. Simply connect any ADAT equipment, such as the Focusrite Octopre, using light pipes. However in today's modern studio, audio networking is taking over. Focusrite's RedNet range is the world's most popular modular audio-over-IP platform. We've brought some of that technology to Red 8Pre, allowing up to 32 channels of Dante inputs and outputs to be connected. Simply plug in an Ethernet cable and add additional mic pres or line I/O with ease. Alternatively arrive at the studio or venue and simply connect one Ethernet cable to Red 8Pre to gain access to the whole network. The possibilities are huge. Hugely Flexible Since Red 8Pre allows the user to assign any physical input or output to any driver/Pro Tools|HD channel, it's easier than ever to customise the interface layout and integrate hardware inserts. Simply open RedNet Control software and reallocate the channels as required. Simple Switching Between DAWs Switch between Pro Tools | HD and a DAW connected to the Thunderbolt interface using the Host Mode setting in the included RedNet Control software. For example, you can switch quickly and easily between Pro Tools | HD and Ableton, Logic or Pro Tools software - just keep both connected at all times and make the switch whenever you need. Ultra-Low Latency Monitoring latency is the enemy of any performer and if the performance isn't excellent, the final mix won't be either. By utilising the lowest-latency conversion available, coupled with a high-performance Core Audio driver, Red 8Pre's analogue round trip latency is kept to an exceptionally low minimum of 1.67ms. Included Software Red 8Pre includes the new RedNet Control software, providing a straightforward and intuitive way to set up mixes and monitoring - and more! Control the mic pres – recall settings, assign stereo pairs, adjust gain and enable features such as highpass filtering and phantom power. Switch quickly between Pro Tools | HD and a Thunderbolt-connected DAW with the Host Mode setting. In addition, Red 8Pre is packaged with Hitmaker Expansion. The Focusrite Studio Console Reborn In Your DAW The Focusrite Studio Console defined countless hits of the 80s and 90s, thanks in large part to its ISA 110 Equaliser and ISA 130 Dynamics Modules. Brainworx's bx_console Focusrite plug-in brings you stunningly accurate emulations of both in a single plug-in, perfectly capturing the famously warm, open sound of two of the most revered pieces of studio hardware ever made. Hitmaker Expansion Improve your sound with studio quality vocals, powerful guitars, rich keys and huge drums, then mix and master with iconic Focusrite studio hardware — all in the box. Every new Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business. Hitmaker Expansion — available with every newly registered Red interface — is built to get you mixing and mastering release-ready music immediately. These are all the plug-ins you need to take your studio-quality tracks to the next level and achieve professional results.

Whether recording vocals and instruments or composing in the box, Clarett+ 2Pre is the pure-sounding, bus-powered* USB-C interface for PC and Mac to take with you on your creative journey. CLARETT⁺ MIC PREAMPS Two Clarett+ mic preamps — featuring All-analogue Air with impedance switching and relay control — capture superbly clear recordings with high headroom, low distortion and ultra-low noise. Two JFET instrument inputs let you plug straight in and preserve the natural tone of your guitar, just like plugging into an amplifier. INDEPENDENT A-D AND D-A CONVERTERS Independent A-D and D-A converters bring you closer than ever to your music and let you hear the truth, whether you’re in the studio or on the road. Greatly improved D-A dynamic range enables you to hear every detail and have greater control over your mix. Lower A-D converter distortion lets you capture signals with more clarity, for greater transparency and sonic accuracy. ANYTHING, ANYWHERE Big recording session? Use ADAT to add 8 mic pres with Clarett OctoPre for a 10-input tracking environment. Keeping it simple? 15W USB bus-power Clarett 2Pre; hook up your mics or guitar and go. HITMAKER EXPANSION Create studio quality vocals, powerful guitars, luscious keys and huge drums, then mix and master with iconic Focusrite studio hardware – all in the box. Every new Scarlett 3rd Gen, Clarett and Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business. Hitmaker Expansion – available with every Scarlett 3rd Gen, Clarett+, Clarett USB and Red interface purchased and registered on or after October 1st 2021 – is built to get you creating records immediately. These are all the plug-ins you need to write, produce, mix and master your music in studio quality. Hitmaker Expansion features exclusive content from legendary Auto-Tune® creators Antares®, along with Brainworx®, Softube®, XLN Audio®, Relab and more. EMULATE ICONIC FOCUSRITE HARDWARE Get the full Focusrite sound with three classic processors from Focusrite’s 40 year legacy of precision studio sound. Brainworx bx_console Focusrite SC is an authentic emulation of the classic ISA 110 module found in Focusrite Studio Console. ISA 110 was created when Sir George Martin asked Rupert Neve for custom modules for AIR Montserrat studios. The Red 2 & Red 3 Plug-in Suite accurately models Focusrite’s classic Red range equaliser and compressor hardware. Coveted by producers and engineers for their exceptional clarity and versatility, the original Red 2 and Red 3 remain prized fixtures in professional recording studios the world over. Now, you can use these revered pieces, easily and flexibly, in your own mixes.

ERSATILE AND SONICALLY TRUE 18-IN/8-OUT AUDIO INTERFACE FOR THE COMPLETE CREATORClarett+ 4Pre is the studio-grade audio interface for PC and Mac, designed for music makers who demand the highest quality while recording and mixing their audio creations. CLARETT⁺ MIC PREAMPSFour high-headroom, low-noise, low-distortion Clarett+ mic preamps — featuring All-analogue Air with impedance switching and relay control — capture vocals, drums and acoustic instruments with immense clarity. Two JFET instrument inputs let you plug straight in and preserve the natural tone of your guitar, just like plugging into an amplifier. INDEPENDENT A-D AND D-A CONVERTERSIndependent A-D and D-A converters bring creators and collaborators closer than ever to their music, with extremely wide dynamic range and low distortion. Greatly improved D-A dynamic range enables you to hear every detail and have greater control over your mix. Incredibly low A-D converter distortion lets you capture signals with more clarity, for greater transparency and sonic accuracy. Two powerful and true-to-life headphone outputs inspire artists to hear every nuance, customise their foldback mix, and perform their best. ANYTHING, ANYWHEREClarett+ 4Pre brings collaborators together, with options to record up to 18 input channels simultaneously. Expand via ADAT using the Clarett OctoPre or other outboard hardware. Four analogue outputs and MIDI input and output makes Clarett+ 4Pre the centrepiece of the evolving recording studio. HITMAKER EXPANSIONCreate studio quality vocals, powerful guitars, luscious keys and huge drums, then mix and master with iconic Focusrite studio hardware – all in the box. Every new Scarlett 3rd Gen, Clarett and Red interface comes with an unbeatable range of tried-and-tested studio tools from some of the biggest names in the business. Hitmaker Expansion – available with every Scarlett 3rd Gen, Clarett+, Clarett USB and Red interface purchased and registered on or after October 1st 2021 – is built to get you creating records immediately. These are all the plug-ins you need to write, produce, mix and master your music in studio quality. EMULATE ICONIC FOCUSRITE HARDWAREGet the full Focusrite sound with three classic processors from Focusrite’s 40 year legacy of precision studio sound. Brainworx bx_console Focusrite SC is an authentic emulation of the classic ISA 110 module found in Focusrite Studio Console. ISA 110 was created when Sir George Martin asked Rupert Neve for custom modules for AIR Montserrat studios. The Red 2 & Red 3 Plug-in Suite accurately models Focusrite’s classic Red range equaliser and compressor hardware. Coveted by producers and engineers for their exceptional clarity and versatility, the original Red 2 and Red 3 remain prized fixtures in professional recording studios the world over. Now, you can use these revered pieces, easily and flexibly, in your own mixes.