Motu

28 x 32 USB3 audio interface for Mac, Windows and iOS with mixing and effects.Audio Performance: Superb analog audio qualityRenowned ESS Sabre32™ DAC technology delivers 125 dB dynamic range and extremely low harmonic distortion. Analog performance is driven by decades of engineering expertise in audio interface technology.USB-C: Universal connectivity for Mac, PC and iOSConnect to your Mac, PC or iOS device with 5 Gbps USB 3 (compatible with USB 2), with up to 60 audio channels (28 in and 32 out). Class-compliant firmware means you can plug-and-play with Mac or iOS hosts, no driver needed. Industry standard high-performance drivers work with any audio apps. Connect directly to your iPad™ via USB-C or a standard camera connection kit (Lightning adapter).Connectivity: 60 simultaneous audio channelsConnect all your studio gear, including microphones, guitars, synths, keyboards, drum machines, outboard processors, MIDI gear, optical expanders — even a foot pedal. All 28 inputs and 32 outputs are available simultaneously.High Performance Driver: Ultra-low latency performanceOptimized drivers for both Mac and PC deliver renowned, ultra-low latency performance. With a high-performance DAW such as Digital Performer, the 828 delivers an astonishing round trip latency (RTL) of ~2 ms (milliseconds) over USB (2 or 3) at 96 kHz with a 32-sample host buffer.Mic Inputs: Transparent mic channels and hi-Z guitar inputsCapture your recorded material in its truest, most natural form with -113 dB THD+N, 115 dB dynamic range and -129 dBu EIN performance. Each mic channel has individual preamp gain, pad, 48V phantom power and remote control from your computer or iOS device. Each combo jack alternately provides a 1/4-inch high - impedance TS guitar input for DI tracking and reamping.Hi-Z Guitar Inputs: DIY guitar re-ampingDI your guitar to the front-panel input, use CueMix's near-zero latency to loop to any output (with a re-amp adapter, if needed), and record both the dry signal and your mic’d up amp simultaneously. Then re-amp the dry signal later with different amps and cabs — or amp modeling plug-ins — to experiment with different tones. No need to re-plug cables between recording and re-amping. Channel 1-2 Inserts: Extra line inputs when you need themDo you work with compressors and other outboard gear? Each 828 mic input offers a dedicated analog send/return loop, allowing for both mono or stereo mic channel outboard processing via fully balanced connections. If nothing is plugged in to a mic input, its return serves as an extra line input with identical signal characteristics to all other line inputs.Monitor Group: Control up to ten analog outputsControl your 5.1 or 7.1 surround speaker system with a single fader. The Monitor Group gives you the flexibility to choose any analog outputs you wish to control.Control Room: A/B speaker select and talkbackTake control of your recording sessions with the front-panel talkback switch. Connect two sets of monitors and check your mixes instantly with front-panel A/B select buttons.CueMix™ 5: Monitor Mixing with EffectsCueMix 5 for Mac, Windows and iOS gives you simple, yet comprehensive graphic control over your mix with attractive graphic mixing, graphic editing of parametric EQ, and a convenient touch-friendly interface (on iOS) for quick access to all mixing features, digitally controlled trims and other settings.Wireless Control: CueMix 5 for iOSControl all settings and mixing from your USB host or from an iPhone or iPad running the CueMix 5 app. You can even use multiple iOS devices simultaneously. Set a password for your 828 for network security.Loopback and live streamingWith 828 loopback channels, you can easily route computer output back to the computer, where you can mix it with live mics and/or guitar inputs from the 828 in your host software for live streaming or podcasting.Optical I/O and optical expansionTwo optical banks provide 16 channels of ADAT optical at 48 kHz, 8 channels of S/MUX optical I/O at 96 kHz, with optional stereo TOSLink at rates up to 96kHz. Expand your 828 with other gear, or use it as an optical expander.S/PDIF digital I/OThe 828's standard RCA S/PDIF input and output make stereo digital transfers a snap, with optional external clocking and support for sample rates up to 96 kHz. Choose any source signal for the S/PDIF output.MIDI I/O with MIDI ThruConnect MIDI gear without the need for a separate MIDI interface. MIDI Thru mode lets you loop MIDI directly from IN to OUT, bypassing the computer (or with no computer connected).Foot switch inputConnect a standard foot pedal switch (sold separately) for hands-free punch-in while recording. Or map the pedal to any keystroke function in your host software.DC-coupled TRS outputsAll analog outputs are DC-coupled. This means you can use the 828 to manipulate and sequence modular synthesizers from a host DAW using control voltage (CV).Two headphone outputsEach headphone output can be programmed with the same or different mixes, with independent volume control from the front-panel or CueMix 5.Balanced analogThe 828's balanced I/O connections are well-protected against RF interference, AC hum, and other noise-producing environmental factors.Meter ViewsNot using the optical I/O? Or any digital I/O? The 828 provides customized meter views for analog I/O only, digital I/O only and other combinations to best support your workflow.Start making music right away with included workstation software, virtual instruments and loopsConnect the 828 to your Mac or PC and start laying down tracks with the included Performer Lite production software, plus hundreds of loops, one-shots and sounds from industry leaders Big Fish Audio, Lucidsamples and Loopmasters.Performer LitePerformer Lite provides everything you need to record, edit, mix, process and master your own music tracks quickly and easily. Plug in your mic, guitar and MIDI keyboard and start tracking with over 100 virtual instruments, dozens of effects plug-ins, guitar FX processing and much more.100+ InstrumentsPerformer Lite includes over 100 virtual instruments, including acoustic and electric pianos, guitars, basses, drums, organs synths, orchestral instruments, choirs, world instruments and much more. Take your musical muse wherever it wants to go.6 GB of free loops and sample packsPerformer Lite includes 6 GB of free loops and sample packs from leading sample content providers to help you start making music right away. From Performer Lite's Content Browser, choose from dozens of musical styles, click to audition, then drag and drop in your projects timeline to build your track quick.

DescriptionFour mic inputs with best in class audio quality, speed and metering.Audio QualityEquipped with the same ESS Sabre32 Ultra™ DAC Technology found in audio interfaces costing thousands, the M6 delivers an astonishing 120 dB Dynamic Range on its main outputs. ESS converters also drive the headphone outputs, which rivals dedicated headphone amplifiers costing hundreds. Ultra-clean preamp circuits produce a measured -129 dBu EIN on the mic inputs. Capture and monitor your audio with pristine clarity.ESS Sabre32 Ultra™ DAC Technology for superb analog soundThe same converter technology used in audio interfaces costing thousandsMeasured 120 dB dynamic range on outputsMeasured -129 dBu EIN on mic inputsESS-driven headphone outputsSpeedThe M6 provides best-in-class speed for monitoring live inputs (mic, guitar or keyboard) through your computer, thanks to MOTU's expertly engineered USB drivers, which deliver class-leading, ultra-low 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer).MeteringWhen recording and mixing, nothing is more critical than achieving optimum levels. The M6 is the only audio interface in its class with a full color LCD featuring clear, detailed level meters for all inputs and outputs. Enjoy professional-level volume control and feedback to get your sound just right.LoopbackThe M6 driver provides convenient loopback channels to your host computer, so you can easily route computer output back to the computer, where you can mix it with up to four mics (and/or guitars) from the M6 in your host software for live streaming or podcasting. Streaming and podcasting has never been easier and better-sounding!A/B Monitor SwitchThe M6 is the only audio interface in its class to offer A/B monitor switching. Connect two pairs of monitors and quickly check your mixes on each pair with the push of a button.Stand-alone operationWith the included multi-blade international DC power adapter connected, you can power the M6 when the computer is turned off (or completely disconnected from the M6). This allows you to monitor any live inputs you may have (mics, guitars, keyboards, etc.) without a host computer or iOS device needed.A tradition of engineering excellenceDecades of award-winning product engineering for hit songs, mega tours, primetime shows and blockbuster movies goes into every MOTU audio interface.Workstation software, virtual instruments and loops to get you making music right awayConnect the M6 to your Mac or PC and start laying down tracks with the included Performer Lite or Live Lite production software, plus hundreds of loops, one-shots and sounds from industry leaders Big Fish Audio, Lucidsamples and Loopmasters.MOTU Performer LitePerformer Lite provides everything you need to record, edit, mix, process and master your own music tracks quickly and easily. Plug in your mic, guitar and MIDI keyboard and start tracking with over 100 virtual instruments, dozens of effects plug-ins, guitar FX processing and much more. Ableton Live LiteLive Lite 11 is a lightweight version of Ableton Live 11. It comes with all of Live’s essential workflows, instruments and effects – everything you need to record songs, create hands-on with your controller, take music made in your apps further and so much more. 100+ Virtual InstrumentsPerformer Lite includes over 100 virtual instruments, including acoustic and electric pianos, guitars, basses, drums, organs synths, orchestral instruments, choirs, world instruments and much more. Take your musical muse wherever it wants to go.Loops and soundsYou get 6 GB of free loops and sample packs from leading sample content providers to help you start making music right away. Choose from dozens of musical styles, then drag and drop in your project's timeline to build your track quickly.

Get inspired, then refine your mix — all in a singular workflow. Digital Performer 11 delivers inspirational features devised to ignite your creative muse, combined with state-of-the-art studio production technologies engineered for the most demanding, world-class recording and production environments. Articulation Maps Articulation maps allow you to dynamically apply variation to the output of a MIDI track using remote triggers that affect the output of the track. For example, you could create an articulation map called Basic Articulations with separate triggers for Legato, Staccato and Marcato, and then expressively switch among them, on the fly, as you record or play the track. You can import or create custom maps for many popular orchestra sound libraries. Articulation symbols appear in the QuickScribe Editor, linked to their articulation map, where they can be further edited and inserted. You can also edit articulations for a track in lanes in the Graphic Editor and QuickScribe Editor. Audio Retrospective Record DP11 adds audio to its Retrospective Recording capabilities. Now, DP always listens to both MIDI and audio input sources, capturing everything, even if you’re not recording. Like magic, you can immediately recall any audio or MIDI material you’ve recently played. For both MIDI and audio input, Digital Performer frees your creativity and ensures you'll never lose that precious, fleeting creative moment. Clip Triggering With NovationTM and AkaiTM Pad Controllers Gain complete hands-on control of DP’s extensive Clips window with a pad controller like the NovationTM LaunchpadTM Pro mk3 or AkaiTM APC-40. Trigger individual clips or entire scenes (sections of songs). Apply filter sweeps and other effects processing as you go: Digital Performer is now a powerhouse live performance platform that can take your shows wherever you can imagine. Live Performance Mode When performing live, you want all effects processing to be done in real time, rather than pre- generated, for instant responsiveness. Live Performance Mode ensures that your computer feels like an extension of your hands. Chunk Folders and Playlists DP’s unique Chunks feature allows you to create and manage multiple sequences, songs and V-Racks in a single DP project file, from cues for a movie score to set lists for live shows. In DP11, you can now organize your chunks into folders and playlists. Folders are for perfect for organizing your chunks, while playlists serve perfectly as set lists for your next live show. Chunks List Split View Split the chunk list in two sections for improved chunk list management. For example, you could search for a chunk in one list section and then drag it into a folder or playlist in the other. Managing your chunks has never been easier. Multi-channel MIDI Tracks You can now record and play multiple channels of MIDI data in a single track. When setting MIDI track input and output assignments, instead of choosing a specific channel, you can choose ‘any.’ When you choose any for input, you can record all 16 MIDI channels into the track at once. The channels are stored with the MIDI events in the track. When you choose ‘any’ in the track's output assignment, the events will be played out on the same channel they were recorded. Enhanced View Filtering Show and hide individual MIDI channel data using new ‘Channel Selection’ section in the Track Selector. Use the ‘Event Type Selector’ section to show and hide specific event types. Support for MPE and Per-Note CCs MIDI Polyphonic Expression (MPE) is here! In DP 11, you can record multi-channel output from an MPE controller — such as a RoliTM SeaboardTM — as regular MIDI notes containing MPE expression data. Instead of a slew of note and controller data splayed across dozens of tracks, you see a single stream of normal MIDI notes that each contain their own note-specific controllers, for easy and intuitive editing. Hide and show the contained per-note controller and pitch-change events in DP’s familiar piano roll. Zoom in the note grid for finer detail. Zoom per- note data independently of the notes that contain them. Select a number of notes and simply drag vertically on their per-note data with the new "Scale" tool to increase or reduce the amount of expression. MPE-enabled virtual synths The following virtual synth instruments that are included with DP support MPE: Bassline,Modulo, MX4, Nanosampler 2.0, Polysynth and Proton. Per-note Expression Data Lanes Add separate lanes in the Sequence Editor to view and edit per-note MPE expression data with DP’s familiar and powerful continuous controller (CC) editing tools. A check box in each lane allows you to easily toggle the lane between track data and per-note data. With zero learning curve, you’ll master the editing of per-note expression data. New Scale Tool Quickly scale per-note expression data by simply dragging vertically with the new Scale Tool. New Control Surface plug-ins for Native InstrumentsTM and IconTM DP 11 includes new control surface plug-ins for the current Native InstrumentsTM Komplete KontrolTM lineup, including the M32, A-Series, and S-Series MK2 controller lines, and the hot new iCON ControlTM mixing worksurfaces like the QConTM Pro G2/EX, Pro X/XS, Platform Nano and Platform M/X series. These state-of-the-art control surfaces empower your DP workflow so you can work faster and more intuitively. Enhanced AvidTM EuConTM Support DP’s EuCon plug-in has been substantially updated, including support for the Avid S6TM console. In addition, you can now use your EuCon worksurface with DP running on Windows 10. Enhanced Support for MCU and HUI-compatible Control Surfaces A new plug-in called “MCU Compatible” improves support for third-party control surfaces that are Mackie Control Universal-compatible. Substantial improvements have been made to DP’s Mackie Control Universal (MCU) and HUI control surface plug-ins, which can be used with any control surface that supports those protocols, including improved automation toggling, scrub modes, send mode, loop toggle and much more. More Control Surface Enhancements For all control surfaces that support these features: V-Racks can now be displayed on all control surfaces. New track pinning modes (Pin to Mixer, Pin to Focus Window and All Tracks) significantly improve the way corresponding tracks are displayed in DP and on the control surface, so that you always see the tracks you need. New track indicator lights in the Sequence Editor and Mixing Board show which tracks are currently active on any control surface. Track and Clip Effects Every audio track, MIDI track and clip now has a basic transpose setting that you can use to transpose the content of that track or clip by an interval on playback, leaving the original data unaffected. You can conveniently change the setting at any time. MIDI tracks and clips also have a quantize setting, in addition to transpose. Intelligent Audio Interface Selection On macOS, if you haven’t yet selected the audio hardware you wish to use with DP, DP finds the best option for you. If you have a MOTU interface, or other professional interface, DP uses it. If not, DP uses whatever input and output devices you have selected in the System Preferences Sound Panel, and will follow your selection there if you change it. Of course, if you do choose an interface from within DP, DP uses it. Clips Window Enhancements The new ‘Empty Clips Scene’ command makes a new scene and fills it with new empty clips. The ‘Double Clip Loop’ feature doubles the length of the looped portion in a clip and repeats the material to fill the new loop, so you can easily creates changes that you hear every other time through the looped material. List Font Scaling Now you can resize the text in DP’s list windows, independent of the scaling for the rest of the UI. Control three new font size preferences: List, Project Notes and Lyrics. Text Rendering and dialog box scaling on Windows Taking advantage of the latest text rendering engine in Windows 10, DP’s text appears significantly crisper. Numerous additional text alignment tweaks improve DP’s look on Windows. DP now also uses Windows 10's DPI-awareness setting, allowing DP to resize system dialogs and menus appropriately for the size and resolution of your computer screen. Dynamically Resizable Channel Strips DP's faders resize when you make the Mixing Board and Channel Strip windows taller (or shorter). Support for macOS Big Sur and Apple silicon Macs DP11 is fully qualified for macOS Big Sur (11.x) and the latest generation Apple silicon Macs. DP’s audio engine is fully optimized for multi-core performance on Apple silicon, prioritizing audio threads on high-speed cores and reserving CPU bandwidth for critical, time-sensitive processing. ‘Transpose Exclude’ option A new track setting (column) in the Track List allows you to exclude tracks from the Transpose region command. There are also new commands to turn it on and off.

The UltraLite-mk5 includes renowned ESS Sabre32™ DAC technology, featuring the ES9026PRO DAC, to deliver measured 125 dB dynamic range and -114 dB THD+N. Renowned drivers deliver rock-solid performance and industry-leading low latency.

A High-quality Audio Interface That Won’t Break the Bank Looking for a high-quality audio interface that won’t break the bank? The MOTU M4 fits that description to a T. This 4-in/4-out USB-C audio interface includes ESS Sabre32 Ultra DAC technology for top-shelf sound, along with optimized drivers that yield impressive low-latency performance. Two great-sounding mic preamps include individual gain adjustment and phantom power, while 1-touch hardware monitoring ensures smooth tracking. You’ll also benefit from convenient front-panel metering, by way of the M4’s full-color LCD screen. Podcasters will appreciate the built-in loopback functionality, which includes a mix knob for balancing your live input with your computer’s playback. Bus-powered for the ultimate in portability, the MOTU M4 packs a lot of performance into a compact, high-powered audio interface. Best-in-class D/A, low latency, and ample I/O Sweetwater and MOTU have enjoyed a long-standing relationship, due to MOTU's products offering our customers superb sound and solid performance. The M4 follows suit, packing top-notch sound, impressively low latency, and ample I/O into a single-rack enclosure. Renowned ESS Sabre32 Ultra DAC technology delivers 120dB of dynamic range, ensuring that the M4's analog audio quality can hang with the most impressive gear on the market. Optimized drivers yield round-trip latency as low as 2.5ms at 24-bit/96kHz with a 32 sample buffer. The M4 includes all of the essential connections, including two mic preamps, four DC-coupled analog outputs, and an ESS-driven stereo headphone output. MIDI I/O is also included. Loopback functionality makes live internet streaming easy If you do live streaming or podcasting, you’ll appreciate the MOTU M4’s loopback functionality. Loopback blends your mic or other input signals with the output from your computer, then sends the blended signal back to your computer. This enables you to record your computer’s output, along with the inputted material. The M4 also includes a mix knob for balancing your live input with your computer’s playback. Hardware monitoring offers zero-latency operation Latency can really take the mojo out of a performance — it’s a jarring sensation. That’s why the M4 includes 1-touch hardware monitoring. This feature enables all of the interface’s analog inputs to be routed directly to its analog outputs, resulting in zero-latency operation. This means that there is no delay between what you play and/or sing and what you hear in your headphones. The M4’s inputs can also be recorded simultaneously, allowing you to monitor with zero latency while tracking — a must for achieving a natural-sounding performance. MOTU M4 USB-C Audio Interface Features: 4-in/4-out USB-C audio interface ESS Sabre32 Ultra DAC technology delivers 120dB of dynamic range and superb audio quality Optimized drivers yield round-trip latency as low as 2.5ms at 24-bit/96kHz with a 32 sample buffer Full-color LCD screen supplies convenient front-panel metering 2 great-sounding microphone preamps with individual gain and phantom power 1-touch hardware monitoring on all inputs Loopback for live streaming and podcasting Mix knob for balancing live input with your computer’s playback USB bus-powered for the ultimate in portability 6+GB of free loops, samples, and 1-shots from industry-leading libraries Tech Specs Computer Connectivity:USB 2.0 Form Factor:Desktop Simultaneous I/O:4 x 4 Number of Preamps:2 Phantom Power:Yes A/D Resolution:Up to 24-bit/192kHz Analog Inputs:2 x XLR-1/4" TRS (mic/line/Hi-Z), 2 x 1/4" (line) Analog Outputs:2 x 1/4" TRS (DC coupled, monitor), 2 x 1/4" TRS (DC coupled, line), 1 x Dual RCA Stereo (monitor), 1 x Dual RCA Stereo (line) Headphones:1 x 1/4" MIDI I/O:In/Out/USB USB:1 x USB-C Software:MOTU Performer Lite, Ableton Live 10 Lite, Bundled Loops/Sounds OS Requirements - Mac:OS X 10.11 or later OS Requirements - PC:Windows 7 SP1 or later Bus Powered:Yes Power Supply:USB bus powered Height:1.75" Width:8.25" Depth:4.25" Weight:1.55 lbs. Manufacturer Part Number:3140

A High-quality Audio Interface That Won’t Break the Bank Looking for a high-quality audio interface that won’t break the bank? The MOTU M2 fits that description to a T. This 2-in/2-out USB-C audio interface includes ESS Sabre32 Ultra DAC technology for top-shelf sound, along with optimized drivers that yield impressive low-latency performance. Two great-sounding mic preamps include individual gain adjustment and phantom power, while 1-touch hardware monitoring ensures smooth tracking. You’ll also benefit from convenient front-panel metering, by way of the M2’s full-color LCD screen. Podcasters will appreciate the built-in loopback functionality. Bus-powered for the ultimate in portability, the MOTU M2 packs a lot of performance into a compact, high-powered audio interface. Best-in-class D/A, low latency, and ample I/O Sweetwater and MOTU have enjoyed a long-standing relationship, due to MOTU's products offering our customers superb sound and solid performance. The M2 follows suit, packing top-notch sound, impressively low latency, and ample I/O into a single-rack enclosure. Renowned ESS Sabre32 Ultra DAC technology delivers 120dB of dynamic range, ensuring that the M2's analog audio quality can hang with the most impressive gear on the market. Optimized drivers yield round-trip latency as low as 2.5ms at 24-bit/96kHz with a 32 sample buffer. The M2 includes all of the essential connections, including two mic preamps, two DC-coupled analog outputs, and an ESS-driven stereo headphone output. MIDI I/O is also included.     Loopback functionality makes live internet streaming easy If you do live streaming or podcasting, you’ll appreciate the MOTU M2’s loopback functionality. Loopback blends your mic or other input signals with the output from your computer, then sends the blended signal back to your computer. This enables you to record your computer’s output, along with the inputted material. Hardware monitoring offers zero-latency operation Latency can really take the mojo out of a performance — it’s a jarring sensation. That’s why the M2 includes 1-touch hardware monitoring. This feature enables all of the interface’s analog inputs to be routed directly to its analog outputs, resulting in zero-latency operation. This means that there is no delay between what you play and/or sing and what you hear in your headphones. The M2’s inputs can also be recorded simultaneously, allowing you to monitor with zero latency while tracking — a must for achieving a natural-sounding performance. MOTU M2 USB-C Audio Interface Features: 2-in/2-out USB-C audio interface ESS Sabre32 Ultra DAC technology delivers 120dB of dynamic range and superb audio quality Optimized drivers yield round-trip latency as low as 2.5ms at 24-bit/96kHz with a 32 sample buffer Full-color LCD screen supplies convenient front-panel metering 2 great-sounding microphone preamps with individual gain and phantom power 1-touch hardware monitoring on all inputs Loopback for live streaming and podcasting USB bus-powered for the ultimate in portability 6+GB of free loops, samples, and 1-shots from industry-leading libraries Tech Specs Computer Connectivity:USB 2.0 Form Factor:Desktop Simultaneous I/O:2 x 2 Number of Preamps:2 Phantom Power:Yes A/D Resolution:Up to 24-bit/192kHz Analog Inputs:2 x XLR-1/4" combo (mic/line/Hi-Z) Analog Outputs:2 x 1/4" TRS (DC coupled), 1 x Dual RCA Stereo Headphones:1 x 1/4" MIDI I/O:In/Out/USB USB:1 x USB-C Software:MOTU Performer Lite, Ableton Live 10 Lite, Bundled Loops/Sounds OS Requirements - Mac:OS X 10.11 or later OS Requirements - PC:Windows 7 SP1 or later Bus Powered:Yes Power Supply:USB bus powered Height:1.75" Width:7.5" Depth:4.25" Weight:1.35 lbs. Manufacturer Part Number:3120

The LP32 provides four independent banks of 8-channel ADAT optical I/O, 64 channels of USB I/O, 32 channels of AVB-TSN network I/O and a headphone output, for a total of 258 simultaneous I/O channels.High-performance computer connectivityNew, optimized drivers for both Mac and PC deliver ultra-low latency performance. With a high-performance DAW such as Digital Performer, the LP32 delivers an astonishing round trip latency (RTL) of 1.70 ms (milliseconds) on OS X and 1.71 ms on Windows over USB (at 96 kHz with a 32-sample host buffer).DSP mixing and effects processingThe LP32's 48-input digital mixer delivers 7 stereo aux busses, 3 groups, access to 64 network inputs, and DSP effects, including classic reverb, EQ modeled after British analog console EQs and compression modeled after the legendary LA-2A compressor. If you know your way around a large-format mixing console, you'll feel right at home. With 32-bit floating point processing, the LP32's DSP engine delivers virtually unlimited headroom and the utmost in sound quality.Web app controlThe software that you use to control the LP32 doesn't reside on your hard drive. It's a web app served from the hardware itself. This means you can control the LP32'son-board DSP, mixing, and device settings from the web app software running in your favorite web browser on the computer, or even a tablet or smartphone on the same Wi-Fi network as your computer.Audio analysis toolsAnalyze and scope your audio with advanced diagnostic tools, including a full-screen real-time FFT display, spectrogram "water- fall" display, full-featured oscilloscope, X-Y plot and phase analyzer.AudioDeskIncludes AudioDesk workstation software for Mac and Windows with 24-bit recording, sample-accurate editing and 32-bit mixing and mastering.Specifications:Connectivity: USB, EthernetForm Factor: DesktopDigital Inputs: 4 x Optical Toslink (ADAT, SMUX)Digital Outputs: 4 x Optical Toslink (ADAT, SMUX)Data I/O: 1 x Ethernet (AVB)Headphones: 1 x 1/4"USB: 1 x Type BClock I/O: In/Out

The 8D provides universal connectivity to your Mac or PC through USB or AVB/TSN. Renowned drivers deliver industry-leading ultra-low latency and proven rock solid performance.High-performance computer connectivityNew, optimized drivers for both Mac and PC deliver ultra-low latency performance. With a high-performance DAW such as Digital Performer, the 8D delivers an astonishing round trip latency (RTL) of 1.70 ms (milliseconds) on OS X and 1.71 ms on Windows over USB (at 96 kHz with a 32-sample host buffer).DSP mixing and effects processingThe 8D's 48-input digital mixer delivers 7 stereo aux busses, 3 groups, access to 64 network inputs, and DSP effects, including classic reverb, EQ modeled after British analog console EQs and compression modeled after the legendary LA-2A compressor. If you know your way around a large-format mixing console, you'll feel right at home. With 32-bit floating point processing, the 8D's DSP engine delivers virtually unlimited headroom and the utmost in sound quality.Web app controlThe software that you use to control the 8D doesn't reside on your hard drive. It's a web app served from the hardware itself. This means you can control the 8D'son-board DSP, mixing, and device settings from the web app software running in your favorite web browser on the computer, or even a tablet or smartphone on the same Wi-Fi network as your computer.Audio analysis toolsAnalyze and scope your audio with advanced diagnostic tools, including a full-screen real-time FFT display, spectrogram "water- fall" display, full-featured oscilloscope, X-Y plot and phase analyzer.AudioDeskIncludes AudioDesk workstation software for Mac and Windows with 24-bit recording, sample-accurate editing and 32-bit mixing and masteringSpecifications:Connectivity: USB, EthernetForm Factor: DesktopDigital Inputs: 2 x Coax (S/PDIF), 2 x XLR (AES/EBU)Digital Outputs: 2 x Coax (S/PDIF), 2 x XLR (AES/EBU)Data I/O: 1 x Ethernet (AVB)Headphones: 1 x 1/4"USB: 1 x Type BClock I/O: In/Out  

Motu 624 hybrid audio interface packs high-end sound, ultra-low latency, and generous I/O into a portable half-rack unit. ESS Sabre32 DAC technology delivers an impressive 123dB of dynamic range on balanced, DC-coupled analog outputs. Experience round-trip latency as low as 1.6ms at 96kHz via Thunderbolt and 1.9ms via USB. 32 total channels of audio I/O make connecting your instruments, microphones, and outboard gear easy. An onboard DSP mixer provides latency-free routing, along with an array of powerful digital effects. Use the 624 as a standalone mixer, or control it wirelessly from your tablet, smartphone, and laptop. Both onstage and in the studio, the MOTU 624 delivers.The 624 follows suit, packing top-notch sound, impressively low latency, and ample I/O into a portable half-rack enclosure. Renowned ESS Sabre32 DAC technology delivers 123dB of dynamic range, ensuring the 624's analog audio quality can hang with the most impressive gear on the market. Optimized drivers yield round-trip latency as low as 1.6ms at 96kHz via Thunderbolt and 1.9ms via USB. Packed with connectivity, the 624 includes 8-in/8-out of analog I/O with two stellar microphone preamps, two hi-Z guitar inputs, 4 x 6 line ins/outs, and a stereo headphone output. The 624 also supplies you with eight channels of digital I/O via ADAT.It's built-in digital mixer delivers large-console-style mixing with 48 channels (via AVB expansion), 12 stereo buses, and 32-bit floating-point effects processing, so building complex, latency-free routing schemes is a piece of cake. And routing is extremely flexible — send any input to any output, or even multiple outputs. Add Classic Reverb, with lengths up to 60 seconds, sculpt your sound with a 4-band British parametric EQ, and apply vintage compression that's modeled after the legendary LA-2A. The 624's mixing and effects DSP engine exhibits virtually unlimited headroom and outstanding sound quality.If you connect a wireless router to your 624, you can access all of its internal mixing functions, including effects and processing on your tablet, smartphone, or laptop, turning this powerful audio interface into a fully capable standalone mixer. Best of all, the control software is web-based. It runs in your favorite web browser on Mac, Windows, Linux, iOS, or Android — basically anything — as long as it's on the same network. Specifications16-in/16-out hybrid audio interface for studio and live soundESS Sabre32 DAC technology delivers 123dB of dynamic range and superb audio qualityOptimized drivers yield round-trip latency as low as 1.6ms at 96kHz via Thunderbolt and 1.9ms via USB2 pristine microphone preamps offer clear and transparent sound8 channels of ADAT optical digital I/O expands your system with additional gearOnboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your laptop, tablet, or smartphoneMOTU's AVB audio networking expands your system with additional AVB-equipped audio interfacesCreate an AVB network via optional AVB Switches with support for up to 5 compatible interfaces

If you're looking for an audio interface with high-end sound, ultra-low latency, and generous I/O, you're in luck. The MOTU 8A exhibits excellent sound with an impressive 123dB of dynamic range, by virtue of ESS Sabre32 DAC technology. Round-trip latency as low as 1.6ms at 96kHz via Thunderbolt and 1.9ms via USB make recording a trouble-free endeavor. Connecting your line-level gear is easy, with 34 total channels of I/O on tap. Employ the 8A as a standalone mixer, or enjoy wireless control from your tablet, smartphone, and laptop. The MOTU 8A hybrid audio interface also features a DSP mixer for latency-free routing, and a range of useful digital effects.The 8A follows suit, packing top-notch sound, impressively low latency, and ample I/O into a portable half-rack enclosure. Renowned ESS Sabre32 DAC technology delivers 123dB of dynamic range, ensuring that the 8A's analog audio quality can hang with the most impressive gear on the market. Optimized drivers yield round-trip latency as low as 1.6ms at 96kHz via Thunderbolt and 1.9ms via USB. Packed with connectivity, the 8A includes eight analog inputs, eight analog outputs, and a stereo headphone output. The 8A also supplies you with eight channels of digital I/O via ADAT.MOTU 8A's built-in digital mixer delivers large-console-style mixing with 48 channels (via AVB expansion), 12 stereo buses, and 32-bit floating-point effects processing, so building complex, latency-free routing schemes is a piece of cake. And routing is extremely flexible. Send any input to any output, or even multiple outputs. Add Classic Reverb, with lengths up to 60 seconds. Sculpt your sound with a 4-band British parametric EQ. Apply vintage compression that's modeled after the legendary LA-2A. The 8A's mixing and effects DSP engine exhibits virtually unlimited headroom and outstanding sound quality. Specifications16-in/18-out hybrid audio interface for studio and live soundESS Sabre32 DAC technology delivers 123dB of dynamic range and superb audio qualityOptimized drivers yield round-trip latency as low as 1.6ms at 96kHz via Thunderbolt and 1.9ms via USB8 analog inputs accommodate a wide variety of line-level gear8 channels of ADAT optical digital I/O expands your system with additional gearOnboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your laptop, tablet, or smartphoneMOTU's AVB audio networking expands your system with additional AVB-equipped audio interfacesCreate an AVB network via optional AVB Switches with support for up to 5 compatible interfaces 

As a stage box or audio interface for your DAW, the MOTU Stage-B16 combines ample I/O with ultra-low latency and networking capabilities via AVB Ethernet connectivity. Built-in DSP means you can add modeled analog EQ, vintage compression, and outstanding reverb to inputs and outputs, while mixing up to 48 channels and 12 stereo buses. You get 16 stellar mic preamps, and you can link multiple Stage-B16s via Ethernet if you need more I/O. For studio recording on your Mac or with your iOS device, connect via USB 2.0 for high-quality audio recording up to 192kHz.Audio Video Bridging over Ethernet (AVB) is a way to transmit digital audio and video over an Ethernet cable and allows you to network devices together for better system management and higher capacity. You can connect the MOTU Stage-B16 directly to the Ethernet port on your Mac computer, or you can connect it to a network switch like MOTU's AVB Switch so that any device on the network can access it. Basically, AVB allows for high channel counts, ultra-low latency, and network audio over a simple Ethernet cable.Like all MOTU equipment, the Stage-B16 is reassuringly rugged for reliable performance on the road. Connect your mics and stage monitors, then run a single Ethernet cable to your Mac or your MOTU AVB Switch. You'll have control over all functionality from any computer, iOS, or Android device that can access the network, no matter where you are in the venue.Features:16 x 8 digital mixer, stage box, and AVB/USB audio interfaceBuilt-in DSP for EQ, compression, and reverb on all inputs and outputsEthernet connectivity offers ultra-low latency, even with 100m cable runsA smart way to add more audio channels to your AVB networkMultiple units can be daisy-chained for higher channel countsStellar sound quality with up to 192kHz resolutionPowerful mixer with up to 48 channels and 12 stereo busesCan be used as an iOS audio interface via USB (requires Camera Connection Kit)Built ruggedly to withstand stage useControl all functionality with the web-based app from any computer or device connected to the network

If you're looking for a system that can meet the needs of a wide range of professional audio applications, then check out the MOTU 16A hybrid audio interface. With 16 balanced analog inputs and outputs, the 16A serves as an excellent conduit for your outboard microphone preamplifiers and other studio gear, and an additional 16 channels of I/O on ADAT optical ports provides you with plenty of expansion for multi-channel mic pres and more. Thanks to its Thunderbolt connectivity, latency is no hurdle for the 16A, though the onboard DSP mixer offers latency-free routing for monitoring and mixing. MOTU's AVB Ethernet lets you network multiple AVB interfaces to your 16A, and advanced capabilities even let you use it as a standalone, iPad-controlled digital mixer if you like. MOTU 16A Hybrid Audio Interface at a Glance:Classic MOTU audio quality with the shockingly low latency of Thunderbolt connectivityDSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsExpand your production system with additional AVB networkable audio interfacesClassic MOTU audio quality with the shockingly low latency of Thunderbolt connectivityThe 16A is no exception. With a mere -110dB THD+N of self noise, this 16A's 16-channel analog I/O offers you some of the cleanest audio around, and an additional 16 channels of digital I/O via ADAT optical ports brings your total channel count to 32 x 32. To go with this impressive selection of high-quality I/O, MOTU gave the 16A ultra-fast Thunderbolt connectivity (in addition to USB 2.0), so you get epically low system latency too. DSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsGranted, with the MOTU 16A's extremely fast Thunderbolt connection, system latency isn't much of an issue to begin with, but the onboard DSP mixer still offers a number of advantages you'll find useful in a variety of settings, such as when you're connected via USB. For starters, this digital mixer supports up to 48 inputs (via AVB expansion) and 12 stereo busses, allowing you to set up extremely complex routing schemes completely independent of your computer.In fact, if you connect a wireless router to your 16A, you can access all of its internal mixing functions, including effects and processing, via an app on your iOS device, turning this powerful audio interface into a fully capable standalone mixer. Speaking of onboard processing and effects, whether you're in the studio or onstage with your 16A, you'll find a ton of uses for its DSP EQ, compression, gate, and reverb. Expand your production system with additional AVB networkable audio interfacesAnother extremely cool use of the 16A's Ethernet connection is the ability to link more MOTU AVB equipped audio interfaces to it. You can do this in one of two ways: directly via a simple Ethernet cable or as part of an audio network via one or more MOTU AVB Switch. If you go with just a single Ethernet cable, you can easily link a second 16A or other AVB ready device directly to your first one. With MOTU AVB Switches, you can create an audio network of up to five units, potentially linking hundreds of channels of I/O across multiple rooms. And since it's all over standard Cat-5e Ethernet cable, latency or cable runs aren't any kind of issue. MOTU 16A Hybrid Audio Interface Features:A fantastic 32-in/32-out hybrid audio interface for studio and live sound applicationsADAT optical digital I/O lets you expand your system with additional gearChoose from ultra-low-latency Thunderbolt or high-speed USB 2.0 computer connectivityOnboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your iOS device - no computer needed!MOTU's AVB audio networking lets you easily expand your system and additional AVB equipped audio interfacesCreate an AVB network via optional AVB Switches for support for up to five compatible interfacesSpecifications:Computer Connection Type: Thunderbolt, USB 2.0Form Factor: RackmountSimultaneous I/O: 32 x 32A/D Resolution: 24-bit/192kHzBuilt In DSP/FX: YesNumber of Audio Inputs: 16Audio Input Types: 16 x TRSNumber of Audio Outputs: 16Audio Output Types: 16 x TRSNumber of Digital Inputs: 16Digital Input Types: 2 x ADAT opticalNumber of Digital Outputs: 16Digital Output Types: 2 x ADAT opticalNumber of Mic Preamps: 0Phantom Power: NoMIDI I/O: NoClock I/O: In, OutBus Powered: NoRack Units: 1UWidth: 19"Height: 1.75" 

So we were all a bit blown away when the groundbreaking MOTU 8M hybrid audio interface came out, and we're sure you'll feel the same way, when you get a look at what it's got going on under the hood. For starters, the 8M include eight magnificently clear MOTU preamps onboard, which each sport V-Limit protection to ensure clipping doesn't ruin your sound. And each of the 8M's combo inputs accommodate balanced line-level and unbalanced instrument-level signal as well, so you can comfortably hook up all of your gear. An additional 16 channels of I/O on ADAT optical ports provides you with plenty of expansion options too. Thanks to its Thunderbolt connectivity, latency isn't an issue for the 8M, and a standalone DSP mixer onboard offers routing for monitoring, mixing, and more.MOTU 8M Hybrid Audio Interface at a Glance:Classic MOTU audio quality with the shockingly low latency of Thunderbolt connectivityDSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsExpand your production system with additional AVB networkable audio interfacesClassic MOTU audio quality with the shockingly low latency of Thunderbolt connectivityThe 8M hybrid Thunderbolt/USB 2.0 audio interface continues a tradition of high-quality audio that many of us here at Sweetwater have come to expect. With a mere -110dB THD+N of self noise, this 8M's offers you some of the cleanest audio around. Eight amazingly transparent microphone preamps include MOTU's V-Limit protection, which offers a 9dB buffer to prevent digital clipping. An additional 16 channels of digital I/O via ADAT optical ports brings your total channel count to 24 x 24. To go with this impressive selection of high-quality I/O, MOTU gave the 8M ultra-fast Thunderbolt connectivity (in addition to USB 2.0), so you get epically low system latency too. DSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsGranted, with the MOTU 8M's extremely fast Thunderbolt connection, system latency isn't much of an issue to begin with, but the onboard DSP mixer still offers a number of advantages you'll find useful in a variety of settings, such as when you're connected via USB. For starters, this digital mixer supports up to 48 inputs (via AVB expansion) and 12 stereo busses, allowing you to set up extremely complex routing schemes completely independent of your computer.In fact, if you connect a wireless router to your 8M, you can access all of its internal mixing functions, including effects and processing, via an app on your iOS device, turning this powerful audio interface into a fully capable standalone mixer. Speaking of onboard processing and effects, whether you're in the studio or onstage with your 8M, you'll find a ton of uses for its DSP EQ, compression, gate, and reverb. Expand your production system with additional AVB networkable audio interfacesAnother extremely cool use of the 8M's Ethernet connection is the ability to link more MOTU AVB equipped audio interfaces to it. You can do this in one of two ways: directly via a simple Ethernet cable or as part of an audio network via one or more MOTU AVB Switch.If you go with just a single Ethernet cable, you can easily link a second 8M or other AVB ready device directly to your first one. With MOTU AVB Switches, you can create an audio network of up to five units, potentially linking hundreds of channels of I/O across multiple rooms. And since it's all over standard Cat-5e Ethernet cable, latency or cable runs aren't any kind of issue. MOTU 8M Hybrid Audio Interface Features:A fantastic 24-in/24-out hybrid audio interface for studio and live sound applications8 pristine microphone preamplifiers offer clear and transparent sound of any kind of microphoneV-Limit overload protection offers 9dB of headroom to prevent digital clippingADAT optical I/O lets you expand your system with additional outboard gearChoose from ultra-low-latency Thunderbolt or high-speed USB 2.0 computer connectivityOnboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your iOS device - no computer needed!MOTU's AVB audio networking lets you easily expand your system and additional AVB equipped audio interfacesCreate an AVB network via optional AVB Switches for support for up to five compatible interfacesSpecifications:Computer Connection Type: Thunderbolt, USB 2.0Form Factor: RackmountSimultaneous I/O: 24 x 24A/D Resolution: 24-bit/192kHzBuilt In DSP/FX: YesNumber of Audio Inputs: 8Audio Input Types: 8 x XLR comboNumber of Audio Outputs: 8Audio Output Types: 8 x TRSNumber of Digital Inputs: 16Digital Input Types: 2 x ADAT opticalNumber of Digital Outputs: 16Digital Output Types: 2 x ADAT opticalNumber of Mic Preamps: 8Phantom Power: YesMIDI I/O: NoClock I/O: In, OutBus Powered: NoRack Units: 1UWidth: 19"Height: 1.75" 

The MOTU Monitor 8 gives you three-in-one functionality: monitor mixer, headphone amp, and audio interface - all with exceptional audio fidelity. Monitor 8 lets you mix 24 inputs, multichannel computer audio, and dozens of AVB audio network channels to eight stereo monitor groups. Monitor 8's extensive routing grid lets you effortlessly patch inputs to outputs, or splits your inputs to multiple destinations. You can use Monitor 8 as a standalone mixer and control everything from its web app running on your iPad, iPhone, tablet, smartphone, or laptop. Connect another MOTU AVB interface with a simple Ethernet cable. Read on to discover the many cool ways you can use the wonderfully innovative MOTU Monitor 8!Eight stereo output groups, extensive connectivityOperates standalone or as an interfaceMix and match, build your networkMonitor 8 sports eight stereo output groups: Main, Aux, and Monitor Groups A through F. The XLR Main Outs and balanced 1/4" Aux Outs can feed primary and secondary studio monitors or PA speakers. You can then set up six additional, independent monitor groups - each with multiple mirrored outputs that include front and rear panel 1/4" headphone outputs, a summed 1/4" Mono Output, and on groups A-D, balanced stereo 1/4" outputs. In total, monitor mixes can be sent to 12 sets of headphones, six stage monitors, four stereo in-ear modules (or other stereo line-level destinations), and two sets of powered speakers. If that's not enough, two banks of ADAT optical input let you connect digital mixers, optical expanders, or other gear (16 channels at 44.1/48kHz or 8 channels at 88.2/96kHz). MOTU designed Monitor 8 to have the versatility your modern audio production methods require. You can use it without a computer, as a standalone mixer and headphone amp, but it also makes a superb AVB (Audio Video Bridging) or USB 2.0 interface that is USB 3.0 and iOS compatible. Beefy DSP gives you large-format console-style mixing with 48 channels, 12 stereo busses, and 32-bit floating point effects processing, including modeled analog equalization, vintage-style compression, and classic reverb. For standalone mixing, you can control Monitor 8 via Wi-Fi from web app software running in your browser on your iPad, iPhone, tablet, smartphone, or laptop. And for multi-user control of Monitor 8's multiple mix busses, you can even run it on several devices concurrently.You can mix and match Monitor 8 with other MOTU AVB interfaces (such as the 1248, 8M, 16A, 24Ai or 24Ao) using readily-available, inexpensive Cat-5e cables. They all have complementary I/O configurations that make it easy for you to build a customized, state-of-the-art AVB audio network system. Add more I/O with the MOTU AVB Switch (available separately). Build an AVB audio network with multiple switches and sub-millisecond latency - even over long cable runs. Stream hundreds of channels among devices and computers on your network. Onstage or in the studio, Monitor 8 delivers truly amazing sound quality and rock-solid, cutting-edge performance.Features:24 x 16 x 8 monitor mixer6-channel headphone ampUSB/AVB audio interfaceSuperb audio quality24 inputs and 8 stereo bus outputsTwo banks of ADAT opticalSix monitor groups with flexible outputsUniversal connectivityLarge-format console-style mixingOn-board 32-bit floating point DSPSystem expansion via Cat-5e cablesAVB audio networkingFlexible matrix routing and splittingStandalone mixing with wireless controlIncludes AudioDesk workstation software for Mac and WindowsWeb app control from your laptop, tablet, or smartphoneSupports multi-user, concurrent-device control

The MOTU 112D is an incredibly flexible device. A digital audio interface, router, format converter, and stand-alone mixer - all in a roadworthy, rackmount 1U chassis, the 112D connects to your host computer through ultra-fast Thunderbolt technology, AVB Ethernet, or class compliant, high-speed USB 2.0 (with USB 3.0 and iOS compatibility). The 112D rocks 24 channels of AES/EBU digital I/O, 24 channels of ADAT optical digital I/O and 64 channels of MADI - that's a whopping total of 112 simultaneous digital I/O channels! Freely route anything, anywhere - all with near-zero latency. Whether you work your audio magic in the studio or onstage, you owe it to yourself to check out the MOTU 112D.112 simultaneous digital I/O channelsProdigious router and converterBig-console-style mixingRule your networkYou read that right. And all channels can be active simultaneously. Check it out: 64 channels of MADI - the 112D operates as a near-zero latency 64-channel MADI-to-AVB converter with flexible routing and splitting to/from your AVB network. Cool, but the plot thickens, with 24 channels of AES/EBU and ADAT up to 96kHz: three 8-channel banks (on D-sub) of AES/EBU at all sample rates up to 96kHz. Then there's ADAT optical, with three 8-channel banks at rates up to 48kHz and six banks (24 channels) of ADAT at 2x sample rates.With the MOTU 112D, you can route any input to any (or multiple) outputs - again, with vanishingly low latency. Freely route all 112 audio channels to and from your Mac or PC over Thunderbolt, or to/from any devices on the AVB network. So, we see that the 112D is indeed a prodigious router, but it's also a rockin' format converter that lets you convert any format to any other. Compatible formats include AES/EBU, optical, MADI, AVB, and computer audio (Thunderbolt or USB). MOTU endowed the 112D with robust DSP that offers you big-console-style mixing with 48 channels, 12 stereo busses, and 32-bit floating-point effects processing that includes modeled analog EQ, vintage-style compression, and classic reverbs. You can even use the 112D as a stand-alone mixer and control the whole shebang from its innovative web app running on your tablet, smart phone, or laptop. Connect a second MOTU AVB interface (such as a 1248, 8M, 16A or another 112D) to the 112D with a simple Ethernet cable. You can add more I/O with the optional MOTU AVB Switch. Build your AVB audio network with multiple switches and sub-millisecond latency, even over lengthy cable runs. Stream hundreds of channels among the devices and computers on the network. In the studio or onstage, the 112D gives you flexible digital routing/conversion, state-of-the-art performance, and rock-solid reliability. You need it.Features:112 simultaneous digital audio channels: 24 channels of AES/EBU I/O24 channels of ADAT optical I/O64 channels of MADI I/OUniversal computer connectivity: ThunderboltAVB EthernetAudio-class-compliant high-speed USB 2.0 (USB 3.0/iOS compatible)On-board 32-bit floating point DSP with big-console-style mixing and effectsFlexible 48-input digital mixer with 12 stereo busses and DSP effectsWeb app control of DSP, mixing, device settings, and network audio routingDiscovery app and web app software works alongside your host audio softwareWeb app control from laptop, tablet, or smart phone connected to your LAN by wire or Wi-FiFlexible system expansion and audio networking with ultra-low network latency

If you're looking for an easy way to network your 1248, 16A, 8M or other AVB-ready MOTU gear, then this MOTU AVB Switch is just what you need. With a single MOTU AVB Switch, you can easily network up to five AVB-compatible devices (including additional switches), to create a vast network of high-quality, high-definition audio for studio or live use. Network-wide clock and sync offer nanosecond-level accuracy, so each of the AVB Switch's five 1-Gigabit Ethernet ports offer near-zero latency via Cat 5e or Cat 6 cable over distances up to 328'. What's more, there's an additional port for connecting to standard Ethernet or a wireless router, in case you want to control your MOTU AVB-equipped devices via your iOS device.Features:Industry standard IEEE 802.1 Audio Video Bridging (AVB) Ethernet switchAutomatic device discovery and bandwidth management with AVB devices makes setup easyUses standard CAT-5e or CAT-6 Ethernet cables for runs up to 100 meters1-Gigabit operation supports high audio channel counts with extremely low latencyMaintains quality of audio and video streams, regardless of other network trafficNetwork-wide clock and sync provides pinpoint accuracy down to the nanosecondBridging port provides compatibility with standard Ethernet for internet and Wi-Fi

The 8pre provides eight microphone/instrument preamps with pristine 96kHz analog recording and playback, combined with 8 channels of ADAT optical digital I/O.The 8pre audio interface delivers everything you need to turn your computer into a powerful 24-bit, 96kHz digital audio workstation.  Expand your system by connecting additional 8pres or other MOTU audio interfaces.Turn your computer into a powerful digital audio workstation with eight mic inputs. Or add eight high-quality mic/instrument inputs to your current system.The 8pre as your primary audio interfaceUse the included CueMix™ software to mix all 16 inputs from your computer. Eight channels of ADAT optical I/O make the 8pre an ideal companion for a digital mixer. Two ADAT lightpipe connections work together to support a full 8 channels of optical digital I/O at any sample rate up to 96kHz.Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Then monitor all of these live inputs via the 8pre’s main outs or headphone jack — with virtually no monitoring latency and no processor drain on your computer. You can even create separate monitor mixes for the main outs and headphones. Control everything, including talk-back and listen-back, from the included CueMix Console™ software, just like a large studio console.The 8pre includes a 16-channel MIDI interface. Simply connect the 8pre to your computer with any USB cable, and both MIDI and audio are ready to go. Connect any MIDI device, such as a controller keyboard, synth module, automated control surface or drum machine. Timing is sample-accurate with supporting software.The 8pre provides cross-platform compatibility with Mac OS X (10.6 or higher), Windows (8/7/Vista) and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac OS, with 24-bit recording/editing and 32-bit mixing/processing/mastering.The 8pre as a microphone preamp expansion interfaceThe 8pre is really two products in one. When it is not connected to a computer via USB, the 8pre functions as an eight-channel analog to digital (optical) converter. Connect the 8pre to your MOTU 828, 896, Traveler or even another 8pre via the optical “lightpipe” connection to add eight high-quality microphone pre-amps to your system. Since the connection is digital, 100% pristine sound is maintained, down to the very last sample.  The 8pre is the perfect way to instantly add eight more mic inputs to any audio interface or digital mixer with optical I/O. If you have a MOTU interface with on-board CueMix DSP mixing, such as the 828 (mkII or mk3), 896 (HD or mk3) or Traveler (original or mk3), the 8pre inputs appear directly in the host interface's CueMix mixer to becomes a transparent extension of your system, operating together with your primary interface as a single, integrated unit — even when the host interface is not connected to a computer and is instead operating as a stand-alone mixer.If you have an 828mk3, 896mk3, 2408mk3, digital mixer or other audio device that supports 96kHz optical and also has two optical inputs, the 8pre connects to it via both optical ports to provide a full eight channels of analog to optical conversion at the 88.2 or 96kHz sample rates.

Built with MOTU’s award-winning MIDI interface technology, the micro express is a compact, bus-powered MIDI interface and time code synchronizer that provides expandable, plug-and-play connectivity to any USB-equipped Mac or Windows computer.The micro express is a mini version of the MIDI Express XT. It has many of the same features as the Express XT  except that it is smaller, bus-powered, and even more affordable. The micro express provides 4 MIDI inputs, 6 MIDI outputs, 96 MIDI channels and compatibility with all Mac and Windows software. Sixteen convenient, one-touch presets (8 factory and 8 user programmable) give you instant front-panel access to multiple operational configurations. The included ClockWorks console software for Mac OS X and Windows 7/Vista provides comprehensive MIDI routing, merging and muting.As a professional-grade SMPTE time code synchronizer, the micro express converts and stripes time code in all frame formats (23.976*, 24, 25, 29.97 drop and non-drop, and 30). SMPTE “jam sync” with adjustable freewheeling provides glitch-free sync. The micro express also supports MIDI Machine Control (MMC), with the ability to serve as either an MMC master or slave. The micro express can distribute MMC transport commands to all other connected MMC devices.The micro express takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for “hot-swapping” and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. Because it's bus--powered, you can take the micro express anywhere. No other MIDI interface offers this much value and performance at such an affordable price.

Within minutes after you begin using MachFive 3, you'll appreciate the years of user interface design and engineering that have gone into this 3rd-generation release. From the configurable part list to the full-screen envelope editor, MachFive 3 has been designed to spur your creative muse while delivering state-of-the-art virtual instrument technology in a streamlined, efficient environment. After all, music, sound design, and audio production are creative endeavors that deserve a worthy partner in creativity.

BPM unites drum machine-style operation with advanced virtual instrument technology to give you the ultimate rhythm programming experience. Combine kits, patterns, and loops with instrument sounds, advanced mixing, and DSP effects to realize your rhythmic vision. Browse a massive library of over 19 GB of rhythm sounds. They sound massive, too, thanks to renowned mastering engineer Chris Gehringer at Sterling Sound, NYC. Mix and match thousands of patterns, kits, loops, and hits inspired by dozens of musical styles.BPM 1.5 adds Beat Box Anthology: authentic sounds from every classic, iconic drum machine that ever mattered during the 70s, 80s, and 90s. You get 80 legendary models (10,000 samples) from the likes of Oberheim, Dynacord, Simmons, Alesis, Korg, Roland, Yamaha, Akai, and others. With enhanced MIDI control features, BPM 1.5 lets you choose your favorite pad controller, MIDI keyboard, or other controller for the ultimate personalized tactile rhythm programming experience. With hundreds of compatible models to choose from, it’s your call.Co-producer on Michael Jackson's Dangerous album and many other multi-platinum releases, Teddy Riley is one of the most successful R&B producers of all time and is widely recognized as the father of New Jack Swing. Teddy uses BPM in his daily work, most recently on the posthumous Michael Jackson album Michael.

Any hardware device with a control voltage (CV) input can be placed under precise digital control from your favorite audio workstation software. You can play and automate modulars, analog synths - even effects processors. Imagine being able to play and automate your CV-equipped analog gear from Digital Performer, Logic Pro, or Live with the same level of control, precision and convenience as a virtual instrument.Whether you’re a seasoned modular synthesizer devotee or simply a computer-based studio owner dreaming of adding that rich, coveted sound only true analog synths can deliver, Volta finally enables you to easily incorporate CV-equipped analog gear into your computer-based studio with all the control, precision and convenience of a virtual instrument.Here are just a few examples of what you can do with Volta:Perform MIDI sequencing with external modular synths with sample-accurate precision (if your host sequencer supports sample-accurate MIDI).Automatically calibrate and tune oscillators with the click of a button.Use ramp automation in your host audio software to control filters, envelope generators, effects processors and other voltage-controlled external gear.Apply LFOs, step sequencers and pattern sequencers to CV inputs and tempo-sync them to your host software timeline.

Electric Keys is a cross-platform virtual instrument that delivers authentic sounds of 50 classic, vintage electric keyboard instruments from the last 40 years. This massive 40GB sound library includes over 20,000 meticulously crafted 24-bit 96 kHz multi samples of legendary electric pianos, electric organs, clavinets, Wurlitzers, tape samplers, string machines, keyboard basses and other rare and exotic electric keyboard instruments.Recreate the popular keyboard sounds and riffs you know so well from your favorite recordings of the last four decades of rock, pop, funk and jazz, or create your own unique style with an intriguing assortment of rare electric keyboard instruments never before offered in a virtual keyboard product - and sure to delight even vintage keyboard devotees. Electric Keys supports all major plug-in formats on Mac OS X and Windows (XP and Vista), including VST, DXi, MAS, Audio Units and RTAS. It also runs as a stand-alone application, turning any laptop or desktop computer into the ultimate electric keyboard instrument.Electric Keys is beautiful to look at and easy to use on screen. Load, save and combine factory or custom presets. Use the virtual effects rack  to combine, apply and save chained multi-effects, including chorus, reverb, delay and more. It’s easy, fast and fun to play and layer professional, authentic electric keyboard sounds. Advanced software features include MIDI control of nearly all parameters, 256-note polyphony per instrument, ultra-low latency, efficient disk streaming for fast preset loading, world-renowned UVI Engine for superb sound quality, universal plug-in compatibility and stand-alone operation. You can even load and play Electric Keys sounds using MachFive for convenient, consolidated operation with your other sound libraries.

Start with a massive 8GB library of brand new sounds from world class orchestras and musicians, recorded with pristine audio fidelity and careful attention to detail. Quality and variety abound. Now add a simple, easy to understand, single-window interface to personalize your instruments. Adjust your sound quickly and intuitively. The MOTU Symphonic Instrument is compatible with all major plug in formats for Macintosh OS X and Windows (VST, Audio Units, DXi, MAS and RTAS).To further enhance the stunning realism of your compositions, the MOTU Symphonic Instrument includes a built-in convolution reverb processor to produce the most realistic room ambiences available. Use authentic acoustic spaces, from orchestra sound stages to renowned concert halls to majestic cathedrals. The MOTU Symphonic Instrument is a CPU-efficient plug-in that saves with your host application document for instant recall. Nothing could be easier.

ZBox matches the output impedance (”Z”) of your guitar to the impedance of a non-amp input, such as the mic/instrument preamp inputs on your audio interface. Without proper impedance matching, your guitar won’t sound natural or “feel right”. If you use Digital Performer's Custom 59 amp model plug-in, or a third-party guitar plug-in product like IK Multimedia Amplitube, Waves GTR, Native Instruments Guitar Rig, or similar guitar modeling software, use ZBox to further enhance the authenticity of the tones you play from these products.ZBox’s unique advantage? Authentic matching circuits that emulate the two-jack switching network found on many classic amplifiers, complete with analog simulation of the input tube grid. Only ZBox delivers the most authentic amplifier impedance matching available for the absolute truest sound and “feel” from your guitar. ZBox is the “missing link” for digital guitar processing, providing the hardware-driven input characteristics required to truly emulate a real guitar amp.

Built from the same technology found in MOTU's flagship MIDI Timepiece, the MIDI Express 128 is a professional MIDI interface that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer. The Express 128 provides 8 MIDI IN, 9 MIDI OUT, 128 MIDI channels and compatibility with all Macintosh and Windows software.The MIDI Express 128 takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for "hot-swapping" and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express 128 is powered by USB – no wall wart or AC plug.No other MIDI interface offers this much value and performance at such an affordable price.FeaturesMIDI connectivity - Provides eight independent MIDI inputs and outputs for a total of 128 MIDI channels.Expansion - MOTU MIDI interfaces grow with you. Expansion is simple. Add additional MIDI ports by plugging in another MOTU MIDI interface.Compatibility - Works with your favorite software. Includes drivers for Mac OS X and Windows. High-speed USB connection.USB-Powered - Bus-powered from USB connection. No additional power necessary.Rack mountable - With rack ears attached, fits standard 19 inch (48.26 cm) rack at 1U high. Excluding rack ears, chassis dimensions are 19 × 7 × 1.75 inches (48.26 × 17.78 × 4.45 cm).

Ethno Instrument Version 2 delivers expressive ethnic instrument sounds combined with authentic world music loops and phrases in one window. This massive 21GB library delivers all the exotic textures you need to take your recordings to the four corners of the globe. Place your music in real acoustic spaces, from primordial caves to towering forests to remote canyons, all faithfully reproduced with stunning realism by Ethno’s built-in convolution reverb processor.Start with a huge library of multisample instruments from all over the world, recorded with pristine audio fidelity. Browse and search by category or geographic region. Now add hundreds of authentic loops and phrases, instantly tempo-locked to your host software time line. Slice loops with one click to trigger each beat from your keyboard, or drag & drop them directly into your host software tracks. Play authentic non-western tunings and scales using your favorite MIDI controller. Adjust sounds quickly with Ethno’s intuitive controls.Create entire songs with unlimited parts and mix them in Ethno or your host software via multiple outputs. Run Ethno stand-alone to turn your computer into a world instrument powerhouse with disk streaming and multiple outputs. Or load it as a plug-in that saves all settings with your host software sessions for instant recall. Co-producer on Michael Jackson's Dangerous album and many other multi-platinum releases, Teddy Riley is one of the most successful R&B producers of all time and is widely recognized as the father of New Jack Swing. Teddy uses Ethno in his daily work, most recently on the posthumous Michael Jackson album Michael.

24bit/192kHz FireWire / USB 2.0 Audio Interface and 28/16 digital mixer with FX, DSP (EQ, compressor and reverb), new CueMix console, 2x mic/guitar inputs with internal hardware limiter, 48V phantom power, 8x balanced line I/Os & 2x XLR main outputs, 2x sends, 2x ADAT I/O, S/PDIF RCA I/O (24bit/96kHz), MIDI I/O, Word Clock I/O, 2x headphone outputs. Compatible with Mac & PC. Dimensions: 19" x 1U.

Upgraded DAC, Dual Full-color Displays, and AVB NetworkingMOTU's 8pre-es outclasses its predecessor with an ESS Sabre32 DAC and dual full-color displays. Experience pristine audio playback, with an outstanding 123dB of dynamic range. This interface's recording performance is impressive, with round-trip latency as low as 1.6ms at 96kHz. A superb complement of I/O includes 52 simultaneous audio channels, eight great-sounding mic preamps, a range of digital options, and AVB networking. Use the 8pre-es as a standalone mixer, or enjoy wireless control from your tablet, smartphone, and laptop. The 8pre-es's powerful DSP-driven mixer gives you 48-channel mixing, along with a range of great-sounding digital effects. The 8pre-es makes a fine centerpiece for any studio.High-end converters, ultra-low latency, and ample I/O offer top-shelf performanceThe 8pre-es follows suit, packing top-notch sound, impressively low latency, and ample I/O into a single-rack enclosure. Renowned ESS Sabre32 DAC technology delivers 123dB of dynamic range, ensuring that the 8pre-es's analog audio quality can hang with the most impressive gear on the market. Optimized drivers yield round-trip latency as low as 1.6ms at 96kHz via Thunderbolt and 1.9ms via USB. Packed with connectivity, the 8pre-es includes eight mic preamps, eight analog outputs, and a pair of stereo headphone outputs. The 8pre-es also supplies you with 16 channels of ADAT and word clock I/O.DSP-fueled mixer with EQ, compression, and effectsThe MOTU 8pre-es's built-in digital mixer delivers large-console-style mixing with 48 channels, 7 stereo buses, 3 groups, access to 32 network inputs, and 32-bit floating-point effects processing, so building complex, latency-free routing schemes is a piece of cake. And routing is extremely flexible. Send any input to any output, or even multiple outputs. Add Classic Reverb, with lengths up to 60 seconds. Sculpt your sound with a 4-band British parametric EQ. Apply vintage compression that's modeled after the legendary LA-2A. The 8pre-es's mixing and effects DSP engine exhibit virtually unlimited headroom and outstanding sound quality. Specifications:Computer Connectivity:USB, Thunderbolt 2, AVBForm Factor:RackmountSimultaneous I/O:24 x 28A/D Resolution:Up to 24-bit/192kHzBuilt In DSP/FX:DSP Effects, ModelingNumber of Preamps:8Phantom Power:YesAnalog Inputs:8 x XLR-1/4" combo (mic/line/Hi-Z)Analog Outputs:8 x 1/4"Digital Inputs:2 x Optical Toslink (ADAT)Digital Outputs:2 x Optical Toslink (ADAT)Headphones:2 x 1/4"USB:1 x Type B 2.0Thunderbolt:1 x Thunderbolt 2Data I/O:1 x Ethernet (AVB)Other I/O:Built-in Talkback MicClock I/O:In, Out/ThruRack Spaces:1UPower Supply:Standard IEC AC connector

The M64 is a flexible MADI interface, router, repeater, splitter, converter and mixer with AVB/TSN networking. It is ideal for routing MADI digital audio streams in live performance systems, network installations or recording studios of any size.High-performance computer connectivityNew, optimized drivers for both Mac and PC deliver ultra-low latency performance. With a high-performance DAW such as Digital Performer, the M64 delivers an astonishing round trip latency (RTL) of 1.70 ms (milliseconds) on OS X and 1.71 ms on Windows over USB (at 96 kHz with a 32-sample host buffer). DSP mixing and effects processingThe M64's 48-input digital mixer delivers 7 stereo aux busses, 3 groups, access to 64 network inputs, and DSP effects, including classic reverb, EQ modeled after British analog console EQs and compression modeled after the legendary LA-2A compressor. If you know your way around a large-format mixing console, you'll feel right at home. With 32-bit floating point processing, the M64's DSP engine delivers virtually unlimited headroom and the utmost in sound quality.Stand-alone operation with wireless controlConnect an Apple® Airport™orother Wi-Fi router with a standard Ethernet cable for wireless control of device settings, powerful 48-channel mixing and DSP effects.Web app controlThe software that you use to control the M64 doesn't reside on your hard drive. It's a web app served from the hardware itself. This means you can control the M64'son-board DSP, mixing, and device settings from the web app software running in your favorite web browser on the computer, or even a tablet or smartphone on the same Wi-Fi network as your computer.Mix and match with other MOTU gearAn included mounting bracket kit joins the M64 side-by-side with any other MOTU half-rack unit to create a single rack-space configuration consisting of customized analog, digital and/or MIDI I/O configuration tailored just for you.Audio analysis toolsAnalyze and scope your audio with advanced diagnostic tools, including a full-screen real-time FFT display, spectrogram "water- fall" display, full-featured oscillioscope , X-Y plot and phase analyzer.Specifications:Computer Connectivity: USB, EthernetForm Factor: DesktopDigital Inputs: 1 x BNC Coax (MADI), 1 x Optical (MADI)Digital Outputs: 2 x BNC Coax (MADI), 1 x Optical (MADI)Data I/O: 1 x Ethernet (AVB)Headphones: 1 x 1/4"USB: 1 x Type BClock I/O: In/OutPower Supply: 15V DC power supply (included)    

Whether you're recording in the studio, taking direct output feeds off of an analog mixer, or capturing audio onstage, the MOTU 24Ai USB 2.0 audio interface gives you the high channel count and low latency you need. Like the rest of MOTU's popular AVB-equipped audio interfaces, the 24Ai lets you send a ton of audio across a standard network. The internal mixer also includes all kinds of DSP processing, summing, and routing options too, and between its high-speed USB 2.0 connectivity and additional 24 channels of ADAT optical I/O, you can easily expand the capabilities of your MOTU 24Ai.Tons of high-quality connections packed into a single-rackspace audio interfaceDSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsExpand your production system with additional AVB networkable audio interfacesIt doesn't matter if you prefer DB-25 D-subs or Phoenix plugs, the MOTU 24Ai makes connecting up to 24 analog line channels a piece of cake. With so many high-quality inputs packed into a single rack space, the A24i is idea for taking direct outputs off of an analog mixing console or capturing signal onstage in a live environment. What's more, there are three pairs of ADAT optical ports onboard, offering an additional 24 channels of digital I/O via USB 2.0 or AVB network.The MOTU 24Ai's onboard DSP mixer offers a number of advantages you'll find useful in a variety of settings. For starters, this digital mixer supports up to 48 inputs and 12 stereo busses, allowing you to set up extremely complex routing schemes completely independent of your computer.In fact, if you connect a wireless router to your 24Ai, you can access all of its internal mixing functions, including effects and processing, via an app on your iOS device, turning this powerful audio interface into a fully capable standalone mixer. Speaking of onboard processing and effects, whether you're in the studio or onstage with your 24Ai, you'll find a ton of uses for its DSP EQ, compression, gate, and reverb.Another extremely cool use of the 24Ai's Ethernet connection is the ability to link more MOTU AVB equipped audio interfaces to it. You can do this in one of two ways: directly via a simple Ethernet cable or as part of an audio network via one or more MOTU AVB Switch.If you go with just a single Ethernet cable, you can easily link a second 24Ai or other AVB ready device directly to your first one. With MOTU AVB Switches, you can create an audio network of up to five units, potentially linking hundreds of channels of I/O across multiple rooms. And since it's all over standard Cat-5e Ethernet cable, latency or cable runs aren't any kind of issue.Features:A versatile 48-in/24-out network audio interface for studio and live sound applicationsChoose from ultra-low-latency AVB ethernet or high-speed USB 2.0 computer connectivity24 high-quality analog inputs are available on both DB-25 D-sub connectors and Phoenix connectors24-channels of ADAT optical digital I/O lets you expand your system with additional gearOnboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your iOS device - no computer needed!AVB audio networking lets you easily expand your system and additional AVB equipped audio interfacesCreate an AVB network via optional AVB Switches for support for up to five compatible interfaces

Whether you're recording in the studio, taking direct output feeds off of an analog mixer, or capturing audio onstage, the MOTU 24Ao USB 2.0 audio interface gives you the high channel count and low latency you need. Like the rest of MOTU's popular AVB-equipped audio interfaces, the 24Ao lets you send a ton of audio across a standard network. The internal mixer also includes all kinds of DSP processing, summing, and routing options too, and between its high-speed USB 2.0 connectivity and additional 24 channels of ADAT optical I/O, you can easily expand the capabilities of your MOTU 24Ao.Tons of high-quality connections packed into a single-rackspace audio interfaceDSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsExpand your production system with additional AVB networkable audio interfacesIt doesn't matter if you prefer DB-25 D-subs or Phoenix plugs, the MOTU 24Ao makes connecting up to 24 analog line channels a piece of cake. With so many high-quality inputs packed into a single rack space, the A24o is idea for taking direct outputs off of an analog mixing console or capturing signal onstage in a live environment. What's more, there are three pairs of ADAT optical ports onboard, offering an additional 24 channels of digital I/O via USB 2.0 or AVB network.The MOTU 24Ao's onboard DSP mixer offers a number of advantages you'll find useful in a variety of settings. For starters, this digital mixer supports up to 48 inputs and 12 stereo busses, allowing you to set up extremely complex routing schemes completely independent of your computer.In fact, if you connect a wireless router to your 24Ao, you can access all of its internal mixing functions, including effects and processing, via an app on your iOS device, turning this powerful audio interface into a fully capable standalone mixer. Speaking of onboard processing and effects, whether you're in the studio or onstage with your 24Ao, you'll find a ton of uses for its DSP EQ, compression, gate, and reverb.Another extremely cool use of the 24Ao's Ethernet connection is the ability to link more MOTU AVB equipped audio interfaces to it. You can do this in one of two ways: directly via a simple Ethernet cable or as part of an audio network via one or more MOTU AVB Switch.If you go with just a single Ethernet cable, you can easily link a second 24Ao or other AVB ready device directly to your first one. With MOTU AVB Switches, you can create an audio network of up to five units, potentially linking hundreds of channels of I/O across multiple rooms. And since it's all over standard Cat-5e Ethernet cable, latency or cable runs aren't any kind of issue.Features:24 channels (balanced/unbalanced)Choose from ultra-low-latency AVB ethernet or high-speed USB 2.0 computer connectivity24 high-quality analog outputs are available on both 3x DB-25 D-sub and 6x 12-pin Phoenix Max level: +20 dBu (digitally adjustable -24 to 0 dB) Onboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your iOS device - no computer needed!AVB audio networking lets you easily expand your system and additional AVB equipped audio interfacesCreate an AVB network via optional AVB Switches for support for up to five compatible interfaces

Built with MOTU’s award-winning MIDI interface technology, the MIDI Express XT is a professional MIDI interface and SMPTE synchronizer that provides plug-and-play connectivity to any USB-equipped Mac or Windows computer. The Express XT provides 8 MIDI IN, 9 MIDI OUT, 128 MIDI channels and compatibility with all Mac and Windows software. Sixteen convenient, one-touch presets (8 factory and 8 user programmable) give you instant front-panel access to multiple operational configurations.The included ClockWorks console software for Mac OS X and Windows provides comprehensive MIDI routing, merging and muting. As a professional-grade SMPTE time code synchronizer, the Express XT converts and stripes SMPTE in all frame formats (23.976*, 24, 25, 29.97 drop and non-drop, and 30). SMPTE “jam sync” with adjustable freewheeling provides glitch-free sync. The Express XT also supports MIDI Machine Control (MMC), with the ability to serve as either an MMC master or slave. The Express XT can distribute MMC transport commands to all other connected MMC devices.The MIDI Express XT takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for “hot-swapping” and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the Express XT’s internal international power supply delivers reliable performance and professional operation.Connect a foot switch to the convenient front-panel pedal input and then program it to generate MIDI data when pressed. Send the data to any connected devices. For example, you could send MIDI patch changes to synths and sound modules during live performance. No other MIDI interface offers this much value and performance at such an affordable price.

The MicroBook IIc provides simultaneous inputs for a microphone, a guitar, and a keyboard or other stereo line level device. The mic preamp delivers neutral coloration and pristine sound, with -20 dB pad and 48V phantom power for condenser mics. Programmable outputs provide flexible monitoring options.The MicroBook IIc is an impressively small 5.5 by 3.6 by 1.25 inches, which means that it slides easily into your backpack — or a large pocket. It also sits nicely next to your laptop or desktop computer. The MicroBook IIc has been engineered with MOTU’s renowned, award-winning audio interface technology, which delivers the uncompromising audio quality and rock-solid performance MOTU interfaces are known for worldwide. You can always record and mix with confidence, even in the most demanding professional recording situations, knowing that decades of engineering experience are behind you, every step of the way. The MicroBook IIc delivers measured audio specs that rival interfaces costing hundreds more.The MicroBook IIc can record and play all channels simultaneously, and high-speed USB 2.0 provides plenty of bandwidth, even at 96 kHz. As the "c" in its name implies, the MicroBook IIc is USB audio class compliant. Use a standard Lightning to USB Camera Adapter (purchased separately) to connect the MicroBook IIc to your iPad. Then record and monitor high-quality audio with your favorite iOS apps. Power the MicroBook IIc with the included Micro-USB cable and AC wall adapter.The two digital rotary encoders not only look good, they feel good, too. Push the volume knob repeatedly to cycle among the main outs, headphones, or both, as indicated by the LEDs. For the mic input, adjust trim and toggle 48V phantom power or the -20 dB pad. Hands-on control is immediate and intuitive. Specifications:Converters: 24-bitSample Rates: 44.1, 48, 88.2, 96kHzAnalog In: 1 x XLR mic input with preamp , 1 x 1/4" hi-Z guitar , 2 x 1/4" TRS phone (balanced/unbalanced) , 1 x 1/8" stereo, "mini" (unbalanced)Analog Outputs: 2 x 1/4" balanced TRS main out , 1 x 1/8" stereo "mini" line out (unbalanced) , 1 x 1/4" TRS headphoneDigital Input: - none -Digital Output: 1 x RCA coaxial S/PDIFComputer I/O: 1 x USB 2.0 "High-speed"Sync Out: S/PDIFHeadphone Output: 1 x 1/4" TRS phone with volume controlPhantom Power: +48VPower Supply: 1 x Micro-B USBTop panel: 2 x 3-segment ladder LEDs • main outs , 1 x 4-segment LEDs • mic in , 1 x 4-segment LEDs • guitar in , 1 x 3-segment LEDs • line in , 1 x 3-segment LEDs • line out , 1 x LED • 48V phantom power , 1 x LED • -20 dB pad , 2 x LEDs • main/phone vol , 1 x digital rotary encoder • mic trim , 1 x digital rotary encoder • main/phone volumePower Specifications: USB bus power (computer) USB-to-AC: power adapter (iPad) , (USB cable and AC wall adapter included)Dimensions: Length: 5 ½ in / 14 cm , Width: 3 ⅝ in / 9.2 cm , Height: 1 ¼ in / 3.2 cm​​ 

Thanks to MOTU’s Hybrid interface technology, the Audio Express connects to any current Mac or PC via FireWire or high-speed USB 2.0. Connect your mic, guitar, keyboard, and digital input, and you are ready to make pro-quality recordings in your personal studio.Quickly balance the levels of your mic, guitar, keyboard, and a S/PDIF device, right from the front panel. Each instrument has its own volume control. Route inputs directly to any output pair, each with its own unique mix: main outs, line outs, S/PDIF out, and phones.Connect your powered speakers. Plug in your instruments. Adjust their volumes with the front panel knobs. Double-click to install the drivers. What could be easier? The Audio Express is designed to be simple to use, so you can focus on your music and performance.The Audio Express delivers MOTU’s renowned, award-winning audio interface technology to your personal studio with the pristine audio quality, advanced engineering, and rock-solid performance that MOTU interfaces are known for worldwide.Features:6-input, 6-output audio interface for Mac and Windows.6 x 8 physical input/output channels — all channels are available simultaneously and operate independently.Hybrid FireWire/USB 2.0 connectivity — connect to your Mac or PC via either bus-powered Firewire or hi-speed USB2.8-bus digital mixer — routes and mixes all six inputs to any output pair.Four separate mixes — each output pair (main outs, line outs, S/PDIF out, and phones) can have a completely different mix of all six inputs, with or without computer tracks.Two mic/guitar combo jacks — provide hi-Z 1/4” guitar input or XLR mic input with phantom power, 20 dB pad, Precision Digital Trim™, and plenty of gain.Stereo analog inputs — on line-level, balanced TRS quarter-inch jacks. Great for keyboards or other line level-input signals.Stereo main outs — on balanced TRS quarter-inch jacks. Connect directly to powered speakers (or other line-level analog destination).Stereo 24-bit 96kHz S/PDIF digital in/out.Stereo headphone output on quarter-inch jack with independent volume control.Support for standard sample rates up to 96 kHz.Precision Digital Trim™ — digitally controlled analog trim on all inputs provides adjustments in approximately 1 dB increments. Fine-tune the balance of your inputs and then save/recall trim configurations.Front-panel mixing and control — each input has its own dedicated volume knob. Control multiple mixes with clear feedback from front panel LEDs and metering.CueMix FX cross-platform mixing software — attractive on-screen graphic mixing with an instrument tuner and audio analysis tools including real-time FFT display, spectrogram "waterfall" display, oscilloscope, X-Y plot and linear or polar phase analysis.Stand-alone operation — bring the Audio Express to your gig, with or without a computer. Just plug in the included power adapter and you are ready to go. Need to tweak the mix? Just turn the front-panel knobs.Front panel volume control of main outs and headphone jack.Expandable — add additional interfaces for more I/O as your needs grow.Time code support — directly resolves to (or generates) time code via any quarter-inch input or output, without the need for an extra synchronizer.Direct Digital Synthesis™ (DDS) — a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the Audio Express is resolved to an external clock source via SMPTE time code.Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.Foot switch input — connect a standard foot pedal switch (sold separately) for hands-free punch-in and punch-out while recording. Or map the pedal to any keystroke function in your host software.DC-coupled TRS outputs — can be used with Volta (sold separately) to manipulate and sequence voltage-controlled modular synthesizers from a host DAW.Plug-and-play operation with your Mac or PC via FireWire or USB2 — compatible with all current and recent generation Macs and PCs.Includes native 32- and 64-bit drivers for Mac OS X and Windows 8/7/Vista, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software.100% compatible with all host-based effects processing in today's popular audio programs.Includes AudioDesk full-featured sample-accurate workstation software for the Mac with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.Bus-powered FireWire operation. No need for external power when operating as a FireWire interface connected to a computer. A power supply is included for stand-alone operation.Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 9.5 × 7 × 1.75 inches (24.13 × 17.78 × 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits one half of a standard 19 inch (48.26 cm) rack at 1U high. 

Η νέα κάρτα απο την Motu είναι βασισμένη στην δοκιμασμένη 828 mk III  και περιλαμβάνει  πλέον εκτός απο USB2 και  Thunderbolt συνδέσεις  Με ανάλυση  24bit / 192kHz  η κάρτα λειτουργεί αυτόνομα και σαν ψηφιακός μίκτης 28/16 με εφφέ DSP. Διαθέτει δύο εισόδους mic/guitar με ενσωματωμένο limiter και δυνατότητα 48V phantom, 8 εισόδους / εξόδους balanced, στερεοφωνική κύρια έξοδος 2 x XLR, δύο sends, 2 x ADAT I/O, SPDIF I/O, MIDI I/O, WordClock I/O, δύο εξόδους ακουστικών.  Συμβατή με PC/MAC. Technicial Specifications Converters24-bitSample rates44.1, 48, 88.2, 96, 176.4, 192 kHzAnalog inputs2 x XLR/TRS combo-style mic/guitar inputs8 x 1/4" TRS line inputs (balanced/unbalanced)Analog outputs2 x XLR balanced main out8 x 1/4" balanced TRS line out2 x 1/4" TRS stereo headphoneDigital I/O16 channels of ADAT optical at 1x sample rates8 channels of SMUX optical at 2x sample rates2-channel TOSlink (optical S/PDIF) up to 96 kHz2-channel RCA S/PDIF up to 96 kHzTotal I/O28 inputs and 30 outputs at 1x sample rates20 inputs and 22 outputs at 2x sample rates10 inputs and 10 outputs at 4x sample ratesComputer I/O1 x Thunderbolt (compatible with 1 and 2)1 x USB 2.0 (compatible with 3.0)Sync I/O1 x SMPTE time code in (LTC)1 x SMPTE time code out (LTC)1 x word clock in1 x word clock outHeadphone output1 x 1/4" TRS stereo phone (assignable)1 x 1/4" TRS stereo phone (mirrors main outs)Phantom power2 x individual +48VFront panel2 x XLR/TRS combo mic/guitar in2 x 1/4" TRS phone2 x digital rotary encoders • phone/main volume2 x digital rotary encoders • mic trim4 x switches • Pad and 48V Phantom4 x digital rotary encoders for LCD control2 x 16 character LCD8 x 4-segment ladder LEDs • 1/4-inch analog in8 x activity LED • 1/4-inch analog out2 x 4-segment ladder LEDs • RCA S/PDIF in2 x activity LED • RCA S/PDIF out2 x 10-segment LEDs • mic in with V-Limit2 x 5-segment ladder LEDs • main outs6 x LED • sample rate indicator1 x LED • LOCK/TACH indicator2 x activity LEDs • optical bank A/B1 x activity LED • MIDI in/out1 x AC power switchPowerInternational 100-240V autoswitching supply50-60 Hz • 20 Watts 

Built from the same technology found in MOTU’s flagship MIDI Timepiece, the micro lite is a professional MIDI interface that provides portable, plug-and-play connectivity to any USB-equipped Mac or Windows computer. The micro lite provides 5 MIDI IN, 5 MIDI OUT, 80 MIDI channels and compatibility with all Mac and Windows software. Large front-panel LEDs illuminate to indicate MIDI activity.The micro lite takes full advantage of USB, giving you high-speed MIDI throughput, sub-millisecond timing accuracy, support for “hot-swapping” and plug-and-play expansion. Need to connect another sound module or synth? No problem. Just add another MOTU USB MIDI interface via any available USB port. And the micro lite is powered by the USB port — no wall wart or AC plug.With its attractive yet rugged metal casing, the micro lite slides easily into a shoulder bag or briefcase for ultra-compact portability and convenient desktop operation. Removable rack attachments, as well as a custom center-joint fastener, are included and allow you to easily mount two micro lites side by side in a standard 19-inch equipment rack.Features:MIDI connectivity:  Five MIDI inputs and outputs provide 80 MIDI channels.Expansion:  MOTU MIDI interfaces grow with you. Expansion is simple. Add additional MIDI ports by plugging in another MOTU MIDI interface.Compatibility:  Works with your favorite software. Includes drivers for Mac OS X and Windows 7/Vista.USB-powered:  Bus-powered from USB connection. No additional power necessary.Rack mountable:  With rack ears attached, fits one half of a standard 19 inch (48.26 cm) rack at 1U high. Excluding rack ears, chassis dimensions are 9.5 x 7 x 1.75 inches (24.13 x 17.78 x 4.45 cm).

There are tons of cool ways to use the MOTU 1248 hybrid audio interface, ranging from modest one-room studios to multi-room production houses or full-blown live-sound applications. However you put your 1248 to work, we're sure you'll appreciate its exquisite sound quality and extremely flexible I/O. In all, you get 32 inputs and 34 outputs, including a flexible 8 x 12 analog section. Four stellar MOTU preamps provide clean and clear amplification, and extremely high-speed Thunderbolt connectivity makes latency a total nonissue. Onboard the 1248 you'll find a powerful DSP mixer complete with effects, EQ, and dynamics. MOTU AVB Ethernet lets you network multiple interfaces to your 1248, and advanced capabilities even let you use it as a standalone, iPad-controlled digital mixer.MOTU 1248 Hybrid Audio Interface at a Glance:Classic MOTU audio quality with the shockingly low latency of Thunderbolt connectivityDSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsExpand your production system with additional AVB networkable audio interfacesClassic MOTU audio quality with the shockingly low latency of Thunderbolt connectivityThe 1248 follows this legacy without fail, packing a total of 32 inputs and 34 outputs into a great-sounding and fantastically affordable 1U frame. This includes an 8-in/12-out analog I/O with four stellar microphone preamps, two guitar inputs, and a noise rating (-110dB THD+N) that stands up to some of the most impressive gear on the market. On top of that, the 1248 offers you 18 channels of digital I/O on ADAT and S/PDIF, and with its ultra-fast Thunderbolt connectivity (in addition to USB 2.0), you could hardly ask for less system latency.DSP-fueled mixer onboard gives you the added benefit of EQ, compression, and effectsGranted, with the MOTU 1248's extremely fast Thunderbolt connection, system latency isn't much of an issue to begin with, but the onboard DSP mixer still offers a number of advantages you'll find useful in a variety of settings, such as when you're connected via USB. For starters, this digital mixer supports up to 48 inputs (via AVB expansion) and 12 stereo busses, allowing you to set up extremely complex routing schemes completely independent of your computer. In fact, if you connect a wireless router to your 1248, you can access all of its internal mixing functions, including effects and processing, via an app on your iOS device, turning this powerful audio interface into a fully capable standalone mixer. Speaking of onboard processing and effects, whether you're in the studio or onstage with your 1248, you'll find a ton of uses for its DSP EQ, compression, gate, and reverb.Expand your production system with additional AVB networkable audio interfacesAnother extremely cool use of the 1248's Ethernet connection is the ability to link more MOTU AVB equipped audio interfaces to it. You can do this in one of two ways: directly via a simple Ethernet cable or as part of an audio network via one or more MOTU AVB Switch.If you go with just a single Ethernet cable, you can easily link a second 1248 or other AVB ready device directly to your first one. With MOTU AVB Switches, you can create an audio network of up to five units, potentially linking hundreds of channels of I/O across multiple rooms. And since it's all over standard Cat-5e Ethernet cable, latency or cable runs aren't any kind of issue. MOTU 1248 Hybrid Audio Interface Features:A fantastic 32-in/34-out hybrid audio interface for studio and live sound applications4 pristine microphone preamplifiers offer clear and transparent sound of any kind of microphoneADAT optical and S/PDIF digital I/O let you expand your system with additional gearChoose from ultra-low-latency Thunderbolt or high-speed USB 2.0 computer connectivityOnboard 32-bit floating point DSP-driven digital mixer with EQ, dynamics, and effects provides latency-free routingHook up a wireless router and take complete control of the onboard mixer from your iOS device - no computer needed!MOTU's AVB audio networking lets you easily expand your system and additional AVB equipped audio interfacesCreate an AVB network via optional AVB Switches for support for up to five compatible interfacesSpecifications:Computer Connection Type: Thunderbolt, USB 2.0Form Factor: RackmountSimultaneous I/O: 32 x 34A/D Resolution: 24-bit/192kHzBuilt In DSP/FX: YesNumber of Audio Inputs: 8Audio Input Types: 4 x XLR, 8 x TRS, 2 x DINumber of Audio Outputs: 12Audio Output Types: 12 x TRSNumber of Digital Inputs: 18Digital Input Types: 2 x ADAT optical, 1 x S/PDIFNumber of Digital Outputs: 18Digital Output Types: 2 x ADAT optical, 1 x S/PDIFNumber of Mic Preamps: 4Phantom Power: YesMIDI I/O: NoClock I/O: In, OutBus Powered: NoRack Units: 1UWidth: 19"Height: 1.75" 

Connect all your studio gear, including microphones, guitars, synths, keyboards, drum machines, outboard processors, MIDI gear, optical expanders - even a foot pedal. All I/O is available simultaneously. New in the 828es, renowned ESS Sabre32™ DAC technology delivers 123dB dynamic range and the same proven, award-winning audio quality as MOTU's flagship 1248. Connects to your Mac or PC with Thunderbolt™, hi-speed USB 2.0 or AVB/TSN Ethernet for up to 256 audio channels (128 in and 128 out). Class-compliant firmware and industry standard drivers work with any audio apps. Connects to iPad™ with a standard camera connection kit (adapter). Capture your recorded material in its truest, most natural form with -108 dB THD+N, 118dB dynamic range and -128dBu EIN performance. Each mic channel has individual preamp gain, pad, 48V phantom power and digital remote control.  Each 828es mic input offers a pre-converter, hard-wired send for mono or stereo mic channel outboard processing. Take control of your recording sessions with the built-in talkback mic and front-panel talk button. Connect two sets of speakers and check your mixes instantly with front-panel A/B speaker select buttons.  A ull-fledged 48-input digital mixer delivers 7 stereo aux busses, 3 groups, access to 64 network inputs, and DSP effects including reverb, 4-band EQ, gate and compression. If you know your way around a large-format mixing console, you'll feel right at home. If you've ever wished to mix on a large console, the driver's seat is now yours. Specifications:ESS Sabre32 Ultra DAC technologyIntegrated DSP for EQ, Compressor and Reverb2 XLR/Jack 6.3 mm mic/guitar inputs thomann with integrated hardware limiter48V Phantom power8 Balanced line inputs and outputs2 XLR main outputs2 Send2 ADAT inputs and outputsCoaxial S/PDIF inputs and outputs (24 Bit / 96 kHz)MIDI input and outputWord clock input and output2 Headphone outputsThunderbolt connector (compatible with TB 1 and 2)USB 2 connectorFor Win Vista thomann / 7 / 8 and MAC OSX 10.6 or higherBody shape: 19" / 1 RUIncludes software CueMix FX, Motu SMPTE Console and AudioDesk (MAC only)