Nagaoka

Replacement stylus Nagaoka MP-110 JN-P110, Tonar article 6821 Cantilever: aluminum alloyStylus: 0.4 x 0.7 Mil bonded elliptical diamond stylus tip

Nagaoka is a world-renowned manufacturer of record needles, celebrating its 80th anniversary this year. The MP cartridge, which has been used around the world for many years, has been redesigned and the new MM cartridges JT-80/JT-1210 have been released. We will continue to support the analog record culture that will be loved by record lovers all over the world.Design Points1. Continuous design from tonearm to the stylus tip. The slanted front panel allows for easy viewing of the tip and easy stylus replacement.2. The small cylinder on the mounting surface makes it easy to put the stylus on and the light body plays sound as it slides on the board.3. The upper part is blocky to match with the tonearm, contrasting with the columnar shape of the stylus.The slim and simple design gives a sense of continuity from the tonearm to the stylus tip. Reducing the number of parts leads to a reduction in vibration. In addition, the bare screws that join the head shell on previous products have been integrated inside the body to reduce exposure and resonance. Besides traditional listeners, these evolutions are also oriented well towards modern pop and jazz, supported by a wide range of genres.Size：Width 18.1mm X Length 26.2mm (Terminal Pin included）X Height 18.5mm、Weight 6.7g Materials: ABS resin, Comparing with our long seller, MP (Moving Permalloy) type cartridge 8g weight Reducing weight by using cylindrical structure、as a MM (Moving Magnet) cartridge , succeeded in improving the sound quality.With a worldwide following, this product combines ease of use and design at a high level. Designed to enhance the visibility of the stylus and ease of operation when replacing The thin handle designed for dropping the stylus on the record gently and the simple construction of the body were highly praised. The functional design and the high perfection of each component will satisfy the users as well.In order to get closer as possible to the ideal frequenxy response, Nagaoka adjusted the hardnss of the damper rubber and core materials. You can feel the difference between the MP and MM. While the MP and MM have the same power generator, the structues of the cantilever are different. Also by selecting and adjusting the damper rubber and stylus tip, Nagaoka found the best balance.

Your phonograph stylus also needs cleaning and care. Due to air pollution caused by both outside influences (traffic) and domestic influences (kitchen, smoking) a sticky film is deposited over time on to your records. During playback the stylus will scrape this deposit from the groove which in turn causes a sticky film to form around the stylus tip which in turn traps other dirt and dust found on your record. This easily visible thick deposit not only influences the quality of the sound but may even cause damage to your favorite records.The special formula of the Nagaoka AM-801 efficiently dissolves all the sticky substance caught on the stylus and removes this as well as the dirt trapped.

The Nagaoka MP-150 phonograph cartridge offers superior clarity, detail and dynamic contrast and offers fine solid bass, superb fluidity across the frequency spectrum, and sweet highs.Features:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Hardened, low-mass taperedStylus type: Superfine elliptical diamondWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 4.5mVFrequency response: 20Hz-20kHzChannel balance 1kHz: > 1.5dBChannel separation: 1kHz: > 24dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0 g

The Nagaoka MP-200 phonograph cartridge offers superior clarity, detail and dynamic contrast.Features:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: High-strength BoronStylus type: Superfine elliptical diamondWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 4mVFrequency response: 20Hz-23kHzChannel balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 25dBRecommended loading: 47k ohmsDynamic compliance: 7.2 x 10-6 cm/dyneStatic compliance: 20 x 10-6 cm/dyne Tracking force range: 1.5 - 2.0 g

The Nagaoka MP-300 phonograph cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phonograph cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300 is an advanced technology cartridge that is destined to become a classic out of the box.Features:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine polished special eliptical bonded diamond stylusPowerfull samarium cobalt magnetHardened low-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Output voltage: 3mVFrequency response: 20 to 25,000HzChannel separation: 27dBChannel balance: 1.0dB or lessLoad resistance: 47K ohmsCantilever: boronStylus tip: 0.4 x 0.7 mil, diamondStylus pressure: 1.3 to 1.8gCartridge weight: 8gHeadshell weight: 13.5g

The Nagaoka MP-500 phonograph cartridge offers the highest musical and creative expression of the new MP series. It expertly extracts and reproduces with vivid, colorful and dimensional clarity what others miss. Meet our little friend - the Nagaoka MP-500 phonograph cartridge - the master of the grooves.Features:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine line contact diamond stylusPowerfull samarium cobalt magnetLow-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casing  Specifications:Type: Moving magnetCantilever: High-strength boronStylus type: Superfine line contact diamondOutput voltage: 1kHz,5cm/sec: 3mVFrequency response: 20Hz-25kHzChannel balance: 1kHz: > 1dBChannel separation: 1kHz: > 27dBRecommended loading: 47k ohmsDynamic compliance: 8.5 x 10-6 cm/dyneTracking force range: 1.3 - 1.8 gWeight: 8 g

The Nagaoka MP-100H  phonograph cartridge offers musical clarity and expression beyond its price and competitors splendid upward start toward long term musical enjoyment.Features:Superfine polished conical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: Lightweight aluminum alloyStylus Type: Conical diamond with .0006 inch radiusCartridge weight: 6.5gHead shell's weight: 9.5Output Voltage: 1kHz, 5cm/sec: 5mVFrequency response: 20Hz-20 kHzChannel Balance: 1kHz: > 2dBChannel separation: 1kHz: > 22dBRecommended loading: 47k ohmsDynamic compliance: 5.5 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.8 - 2.3g

The Nagaoka MP-110H the successor to the highly acclaimed and classic Nagaoka MP11 phonograph cartridge, the new Nagaoka MP-110 H phonograph cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detail  refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.Features:Superfine polished eliptical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantilever for high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: Aluminum alloyStylus Type: Superfine polished elliptical bonded diamond with 0.4 x 0.7 mil radiusCartridge weight: 6.5gHead shell's weight: 9.5Output Voltage: 1kHz, 5cm/sec: 5mVFrequency response: 20Hz-20 kHzChannel Balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 23dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0g

The Nagaoka MP-150H phonograph cartridge offers superior clarity, detail and dynamic contrast.Features:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: Hardened, low-mass tapered aluminum alloyStylus Type: Superfine elliptical diamond with 0.4 x 0.7 mil Cartridge weight: 6.5gHead shell's weight: 9.5Output Voltage: 1kHz, 5cm/sec: 4.5mVFrequency response: 20Hz-20 kHzChannel Balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 24dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0g

The Nagaoka MP-200H phonograph cartridge offers superior clarity, detail and dynamic contrast.Features:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: High-strength Boron Stylus Type: Superfine elliptical diamond with 0.4 x 0.7 mil Cartridge weight: 6.5gHead shell's weight: 9.5Output Voltage: 1kHz, 5cm/sec: 4mVFrequency response: 20Hz-23 kHzChannel Balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 25dBRecommended loading: 47k ohmsDynamic compliance: 7.2 x 10-6 cm/dyneStatic compliance: 20 x 10-6 cm/dyneTracking force range: 1.5 - 2.0g

The Nagaoka MP-300H phonograph cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phonograph cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP-300H is an advanced technology cartridge that is destined to become a classic out of the box.Features:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine polished special eliptical bonded diamond stylusPowerfull samarium cobalt magnetHardened low-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving permalloyCantilever: High-strength Boron Stylus Type: Superfine polished elliptical bonded diamond with 0.4 x 0.7 mil Cartridge weight: 8gHead shell's weight: 13.5gOutput Voltage: 1kHz, 5cm/sec: 3mVFrequency response: 20Hz-25 kHzChannel Balance: 1kHz: > 1dBChannel separation: 1kHz: > 25dBRecommended loading: 47k ohmsDynamic compliance: 7.2 x 10-6 cm/dyneStatic compliance: 20 x 10-6 cm/dyneTracking force range: 1.3 - 1.8g

The Nagaoka MP-500H phonograph cartridge offers the highest musical and creative expression of the new MP series. It expertly extracts and reproduces with vivid, colorful and dimensional clarity what others miss. Meet our little friend - the Nagaoka MP-500 phonograph cartridge - the master of the grooves.Features:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine line contact diamond stylusPowerfull samarium cobalt magnetLow-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casing  Specifications:Type: Moving permalloyCantilever: High-strength Boron Stylus Type: Superfine line contact diamondCartridge weight: 8.0gHead shell's weight: 13.5gOutput Voltage: 1kHz, 5cm/sec: 3mVFrequency response: 20Hz-25 kHzChannel Balance: 1kHz: > 1dBChannel separation: 1kHz: > 27dBRecommended loading: 47k ohmsDynamic compliance: 8.5 x 10-6 cm/dyneTracking force range: 1.3 - 1.8g

The Nagaoka MP-100 phonograph cartridge offers musical clarity and expression beyond its price and competitors splendid upward start toward long term musical enjoyment.Half-inch system with conical diamond on lightweight aluminum cantilver. The Nagaoka MP-100 phone cartridge offers musical clarity and expression beyond its price and competitors - a plendid upwards start toward long term musical enjoymentFeatures:Superfine polished conical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Lightweight aluminum alloyStylus type: Conical diamond with .0006 inch radiusWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 5mVFrequency response: 20Hz-20kHzChannel balance  1kHz: > 2dBChannel separation: 1kHz: > 22dBRecommended loading: 47k ohmsDynamic compliance: 5.5 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.3 g

Nagaoka MP-110 the successor to the highly acclaimed and classic Nagaoka MP11 phono cartridge, the new Nagaoka MP-110 phono cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detailed refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.Features:Superfine polished eliptical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantilever for high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Aluminum alloyStylus type: Superfine polished elliptical bonded diamond with 0.4 x 0.7 mil radiiWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 5mVFrequency response: 20Hz-20kHzChannel balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 23dBRecommended loading: 47k ohmsDynamic compliance: 6.0 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.0 g