Pro-Ject

The XA B balanced acrylic turntable is a gorgeous, high-performance edition to the X Series. It implements a 10″ one-piece aluminum tonearm with a balanced 5-pin DIN output. Also utilizing a balanced balanced MM phono cartridge (the first of its kind!) it brings you one step closer to balanced operation. You need only a DIN > Mini XLR or DIN to XLR cable with which to connect the turntable to any of our Phono Box S3 B, Phono Box DS3 B, Tube Box DS3 B, or Phono Box RS2 balanced phono preamps.A Clearer PictureFor over 30 years we’ve designed & built turntables that focus on sound quality over convenience-oriented features. Along the way we’ve experimented with materials that vary in their resonance properties, and acrylic has remained . Our first ever acrylic turntable (the 6.9Perspective) was a huge success. 6PerspeX variants have been around for 15+ years too, not to mention a host of 2Xperience variants in acrylic. Needless to say, the limited run of our Perspective Final Edition turntable sold out swiftly as well. We take pride in how these turntables take advantage of both the aesthetic & sonic virtues of acrylic in hi-fi, but using acrylic in manufacturing not as easy as you might think. True, it’s anti-resonant, but the rest of the turntable too must lend sonic value to the equation. Measurement & critical listening reveal that acrylic can actually over-damp sonics if it’s not used thoughtfully. XA B uses an aluminum tonearm & platter, the Pick it PRO Balanced cartridge & purpose-selected isolation feet to render music in a lively, dynamic & detail-rich manner… an experience that becomes doubly immersive when you decide to take the plunge into the world of balanced phono.Premium 10″ TonearmThe XA B turntable features a premium 10“ one-piece aluminum armtube. The single-piece tube heightens rigidity while the 10″ length widens the tonearm’s arc, reducing tracing error. The low-friction 4-pinpoint cardanic bearing assembly guarantees precise, stable & accurate tracking. We’ve selected the aluminum armtube over carbon fiber for its sonic merits when paired with the resonant frequency of the acrylic plinth. The tonearm also offers audiophiles full control over their adjustment parameters. One can fine-tune not only tracking force & anti-skate, but also VTA & azimuth if needed. Listeners with cartridge-mounting skills are encouraged to try various cartridges and/or record mats to achieve their desired sonics!Our classic anti-skating system (adaptive anti-skating) changes with the skating force, which varies across a record side as groove conditions change. The TPE-damped counterweight significantly reduces unwanted armtube resonance. We use high-precision stainless steel cardanic tonearm bearings, meaning there’s minimal friction as the tonearm moves and absolutely no ‘play’ (or wiggle) in the bearing structure. This allows the stylus & cartridge to do their jobs unimpeded.True BalancedThe Pro-Ject Pick it PRO Balanced cartridge allows for “True Balanced” signal transmission. A revised version of the Pick it PRO, we re-route the grounding so that it sends a symmetrical signal. The big advantage of a balanced connection is its ability to remove accrued noise and interference from the transmission line (not to mention +6dB gain!). In short, you get more music & less noise – the improvement is not subtle.Our True Balanced cable range offers several options for connecting your XA B to our Phono Box S3 B, Phono Box DS3 B, Tube Box DS3 B or Phono Box RS2 phono stages. Any phono preamp with mini XLR or XLR inputs will do the trick! With XA B’s DIN output, you’d require either an DIN > mini XLR or DIN > XLR cable.High-Quality DIN > RCA CableCables cannot add any information back to a given signal, rather, they’re responsible for allowing as much musical information as possible through to the receiving device. This is why we include our Connect it Phono E 5P > RCA cable. Optimized for phono applications, we’ve implemented quality metals & careful configuration to ensure lossless signal transmission.TPE-Damped Die-Cast PlatterThe 1.7kg (3.75lbs) die-cast aluminum platter is precision-balanced with additional machining after casting. This facilitates perfect platter rotation while playing records. The heavy aluminum platter also adds a TPE (thermoplastic elastomer) damping ring & corresponding cutout on the underside, muting any resonance created by the metal record platter and contributing to the flywheel effect.Damped, Height-Adjustable FeetThe XA B stands on three damped & height-adjustable feet for excellent isolation. By using 3 feet we are able to increase stability on uneven surfaces for optimal leveling – a critical setup parameter in terms of maximizing the performance of a tonearm & cartridge.Sophisticated DC/AC GeneratorOur turntables use switch-mode power supplies for good reason. They take the unrefined AC power from your wall and convert it to DC. That DC power is then fed to DC/AC generator within the turntable, which in turn powers the AC motor. The advantage is that a completely new sine wave is created by the generator, fully decoupling your turntable from the dirty AC power coming from your outlet. This amounts to steady power being fed to the motor thereby enhancing speed stability.Two Upgrades in One BoxClean & stable power is critical for phono setups. The included power supply is a great starting point but you can take it a step further. Power Box S3 Phono provides power for the Debut PRO B (15V) as well as your Pro-Ject phono stage (18V). Its two outputs are specifically engineered to power Pro-Ject turntables and phono preamps simultaneously. The sophisticated DC filtration can have a dramatic impact on overall sound quality. In addition to the sonic improvements, Power Box S3 Phono also offers users a cleaner cable solution (only one wall-wart needed for the PSU).

THE NEW CD BOX S3The CD Box S3 is our first product of the new S3 line. In contrast to DVD or Blu-ray Disc players, a pure CD player is frequently better in playback of stereo CDs. The drive in the CD Box S3 enables 1:1 bit-accurate CD playback. The new DAC chip provides the best digital analog conversion with a bit depth & sampling rate up to 32bit/384kHz. The slot in mechanism smoothly draws in the CD and after a few seconds it is ready to play.New DesignNot only the circuit design was reworked, also the case has been significantly changed & the CD Box S3 introduces our completely new S3 size. Besides the new beautiful full aluminium casework, it also features a 1,54“ display with colour inversion function.Analog & DigitalWe provide you bothUse the internal DAC & connect your CD Box S3 with the RCA Line output to any preamp. For even more versatility, the S/PDIF coaxial output can feed an external DAC.True Red BookDigital Audio Compact Discs (CDDA)The drive is specifically optimized for 1:1 playback of the Red Book CDDA standard. It is put in a fully aluminium torsion-resistant cabinet.1,54" DisplayWith colour inversion functionThe new display shows you all relevant information you need to enjoy your favourite CDs.Handmade in EUSince 1991Made in Europe by technicians, engineers and designers with decades of experience. Expert craftsmanship. Sustainable products with a long lifetime. Audiophile audio performance.

CD BOX DS3 - A HIGH END CD PLAYERThe CD Box DS3 introduces our completely new DS3 line. We picked the best features of its predecessors and added the Texas Instruments PCM1796 DAC to provide you the perfect CD player with all the features you really need. Easily control the CD player with the buttons on the front, or with the supplied remote control and the high contrast dot-matrix display shows you all relevant information you need to enjoy your favourite CDs.Rigid Aluminium HousingStandard sheet metal housings are not torsion-resistant and mechanical accurate enough to mount a sensitive CD drive where the laser position has to be correct all the time. Our massive aluminium chassis provides the best basis for the CD drive and our Blue Tiger CD-80 servo developed by Stream Unlimited is the most advanced on the market.SuspensionA perfect resonance derivativeThree soft points isolate the drive from external vibration and one hard point leads high frequent vibration caused by the fast movement of the laser into the massive chassis.True Red BookDigital Audio Compact Discs (CDDA)The drive is specifically optimized for 1:1 playback of the Red Book CDDA standard. Pure CD players are, in contrast to DVD or Bluray Disc players, frequently better in playback of stereo CDs.Analog & DigitalWe provide you bothUse the internal TI PCM1796 DAC & connect your CD Box with the RCA Line output to any preamp. For even more versatility, the S/PDIF coaxial & optical output can feed an external DAC.Handmade in EUSince 1991Made in Europe by technicians, engineers and designers with decades of experience. Expert craftsmanship. Sustainable products with a long lifetime. Audiophile audio performance.

High-precision cartridge alignment tool with super-fast workflowCartridge alignment with easy, fast and accurate workflowAlign it PRO gives you access a totally unique and effective workflow that makes aligning cartridges incredibly fast and efficient.You can set the Align it PRO up for the exact length of your tonearm and fix it to the center of your tonearm bearing. For Pro-Ject tonearms, the fixing rod has two sides. A pointed end – excellent for any type of tonearm or bearing. And a second flat end, which fits exactly into the center screw of our higher-end tonearms and their bearings (X1, X2, CC and CC Evo, …).With this approach the exact distance for the overhang is set up in no time – with unmatched accuracy on top. You do not need to go back and forth between the inner and outer null-points for a 100% accurate overhang distance, like you would have to with other kinds of alignment protractors! This is also the reason why only the inner null-point is printed on the Align it PRO!For beginners or pros, the Align it PRO comes with detailed instructions and background knowledge to equip you with all the information you need to maximise your vinyl playback.Baerwald GeometryThe Align it PRO uses the Baerwald geometry. Baerwald is an excellent allrounder that many people choose to start their alignment journey with. It strikes an ideal balance of inner and outer grooves tracking, while maintaining excellent linearity in the middle part of your vinyl. The music industry nowadays tends to go back to shorter lengths (20 min or lower per side), and uses 2 records – 4 sides – per album. Baerwald is a perfect choice for this trend and works universally well for many other styles too. Align it PRO is suitable for all Pro-Ject turntables and many other manufacturer‘s turntables and tonearms depending on their pivot to spindle distance.

A2 technologyThe A2 continues the success of our fully mechanical automatic turntables. With the A2, you can now select the drop off point for 7“ (singles) or 12“ (LPs) for 45 RPM records. We have also added 78 RPM to the system allowing you to dig back into old shellac collections. To enjoy listening to your A2, just press start and the tonearm automatically moves to the lead in groove of the record. Once playing, the automatics are completely taken out of the equation.And because the automatics are working entirely mechanically – no additional electronics needed – they truly do not influence or degrade sound quality during playback! At the end of the record, the tonearm is automatically brought back and gently lowered into its resting position and the motor shut off.Why sub-chassis?Automatic turntables have many small mechanical parts, which means you need more hollow space in the chassis to fit them. Hollow spaces are the biggest problem as they always reinforce resonances. By using a sub-chassis, you decouple the tonearm and drive from the chassis. In other words, a sub-chassis is a MUST for automatic turntables and enables them to reach excellent sound performance.Improved Automatic MechanismWe have invested in a new aluminium diecast top for the whole sub-chassis and automatic mechanism. We have tried to avoid plastic parts from the original German automatic design as much as possible. This is the first time in all the 50 years of its existance that the original automatic design has received an improvement like this. Due to the new aluminium diecast cover and the massive chassis, the whole sub-chassis construction is more effective and isolates unwanted resonance much better.Massless Tracking Force AdjustmentThe A2 uses a new system for setting the tracking force. As usual, you first level out the tonearm with the damped counterweight. Damping the counter- weight makes the tonearm as a whole more robust and decouples the counterweight from the tonearm reducing resonant frequencies. Afterwards the tracking force is set by turning a dial directly on the tonearm bearing. Not only is this system very fast, precise and efficient, it also keeps the center of gravity directly on top of the bearing center. The spring based anti-skating can also be adjusted directly on the tonearm base.Improved Tonearm & Cardanic Bearing The A2 features an 8.3” ultra-light-mass aluminium tonearm with an improved tonearm tube with bigger diameter. The is a perfect match for the slightly heavier Ortofon 2M Red. In combination we retain the super fast response and all transient detail with lots of fine microdynamics, while the new 2M Red adds a lot of body and musical warmth. The tonearm bearing has received a major upgrade, is now made out of aluminium and features a 4-pin-point cardanic construction with steel tip ball bearings from our own production. This allows for unhindered and free tonearm movement with the lowest amount of friction possible. The A2 will track your vinyl records with the utmost of precision and tightness.Why Ultra-Light-Mass Tonearm?Since forever, there has been this technical discussion about light-weight tonearms with high compliance MM cartridges vs. heavy tonearms with low compliance MC cartridges. Both approaches have advantages and disadvantages and you‘ll find detailed analysis in concerned literature. However, when it comes to automatic turntables, we NEED ultra-light-mass tonearms. There is no way around it. We need the automatic mechanics to be like those in mechanical watches: small and precise. A heavy tonearm would result in a rougher mechanical design as much higher masses have to be moved. Therefore, the A2 reaches performance hights like no other automatic turntable on the market.

Audiophile vertical Plug & Play turntable with wall-mount option!A turntable set-up does not need to be as complicated as rocket-science. Our VT-E BT turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users. The fastest possible installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set for the included Ortofon OM 5E cartridge. The VT-E BT turntable can be positioned on a table or mounted on a wall.For further ease of use, it comes with a phono pre-amplifier and BT transmitter. So you can easily connect your VT-E BT via BT to any BT speakers or headphones! You can use both BT and RCA output at the same time. VT-E BT is available in black, red or white high gloss colour.

Precision tonearm with carbon-fibre armtube. The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing. The tonearm fits on turntables or tonearm boards with mounting hole according to Linn standardFeaturesThe headshell and armtube are fashioned from a single piece of carbon-fibre.Conical armtube avoids standing wave reflections.Inverted bearing design with four ABEC7 spec ballraces.Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.Sorbothane® -damped counterweight effectively counteracts unwanted resonances.Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.Straight armtube reduces toe-in error.Silicone-damped armlift can be adjusted to suit arm height.The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.Terminal with phono sockets and earth screw.

Precision tonearm with carbon-fibre armtube. The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing. The tonearm fits on turntables or tonearm boards with mounting hole according to Linn standardFeaturesThe headshell and armtube are fashioned from a single piece of carbon-fibre.Conical armtube avoids standing wave reflections.Inverted bearing design with four ABEC7 spec ballraces.Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.Sorbothane® -damped counterweight effectively counteracts unwanted resonances.Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.Straight armtube reduces toe-in error.Silicone-damped armlift can be adjusted to suit arm height.The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.Terminal with phono sockets and earth screw.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

A Milestone For The Next Decades The Debut PRO brings an absolutely new design to Pro-Ject turntables. The audiophile turntable is convincing in all respects – not only visually, but more importantly also in terms of sound. The precision CNC milled parts are optically perfectly coordinated and lead the Debut PRO to its modern simple, elegant and unprecedented design. The nickel finish of all these aluminium components result in a hard, resistant surface. This process enables us to produce very high-quality and sustainable components and avoid plastics and similar materials that continue to age over time and would more importantly also degrade sound quality. The tonearm bearing is a completely new design. Precision CNC'd out of a single block of aluminium, you can see all the production stages above. The last step is putting a nickel finish on it. This will increase the rigidity of the bearing, ensuring free and fluid movement of the tonearm and precise tracking without material degration in looks or function. Deeply driven The electronically regulated synchronous motor drives the platter and guarantees the most accurate and stable speeds. Change between them easily with the toggle switch. With the supplied round belt for 78 rpm you can also listen to your shellac records. A new platter – a deeper dish The new Debut PRO platter is a first on any Pro-Ject turntable. It features a notch for the record label and together with our Record Puck PRO (available separately) the puck's weight will press your record tightly against the platter. The die-cast aluminium platter is reworked and precision balanced in an extra step to obtain an evenly spinning platter. It is anti-magnetic, allowing MC cartridges to work properly. Delve deep into the vast upgrade path the Debut PRO has to offer! The anti-magnetic heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Our seperately available Record Puck PRO provides an extra level of damping and stability, so it is the perfect add-on for the Debut PRO. Hybrid Tonearm The new Debut PRO features a one-piece carbon-aluminium sandwich tonearm. The carbon layer gives the tonearm a high degree of rigidity, while the inner aluminium tube takes over the damping of the tonearm. This makes the tonearm perfect to be upgraded with higher-end MC cartridges! Azimuth & VTA Adjustment The newly designed tonearm base allows you to adjust both the azimuth and the vertical tracking angle (VTA). The tonearm height can be continuously adjusted by loosening the two grub screws. These settings give you the option of adapting the tonearm to height changes allowing the use of different turntable mats or other cartridges to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges. VTA & Azimuth Fully adjustable The Debut PRO comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your turntable as you want it. 33/45/78 RPM High precision motor control The playback speeds are electronically controlled with precision, which guarantees the most accurate and stable music reproduction. Change between speeds easily with the toggle switch. Bearing block Complete new design The precision CNC milled and nickel coated tonearm bearing parts are completely new and designed just for the PRO. Special Platter TPE damped & anti magnetic The heavy aluminium platter has a ring made of TPE (thermoplastic elastomer) on the inside that helps to dampen all resonances and minimizes wow and flutter. Metal Feet Damped & height adjustable The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback.

Debut Carbon EVO Time for Evolution. We have taken our most popular turntable design and improved every aspect of it. The result is an incredibly refined product. Refined in every aspect. Suspension Improved motor suspension The Debut Carbon EVO features our new designed motor suspension. We have improved the old design to consistently reduce the vibrations better than before. Metal Feet Damped & height adjustable The new Debut Carbon Evo stands on three height adjustable damped aluminium feet to guarantee the perfect stand. 1,7 kg Platter Heavy steel and TPE damped We added a TPE (thermoplastic elastomer) ring on the inside of the platter. The result is an even quieter and noiseless operation with less wow and flutter. 33/45/78 RPM High precision motor control The rocker switch on the bottom of the turntable allows you to change speeds with the push of only a single button. The Evolution The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. This turntable is built to last you a lifetime! Redesigned motor suspension We used our technology and experience gained from the past and fit damping techniques of highend turntables into the Debut Carbon EVO. Looking at more advanced TPE damping and highmass sandwich constructions we were able to come up with a new motor and suspension solution for the Debut Carbon EVO. Anytime the perfect stand Our new Debut Carbon EVO does not just look great - it also always stands perfectly level. It uses 3 height adjustable heavy-duty metal feet to ensure a level positioning on every surface. Controlled playback speeds Besides being able to effortlessly change replay speeds with the push of a button, the playback speed is electronically controlled with the utmost precision, which results in the most accurate and stable speeds. Damped From The Inside Our previous metal platter was already heavier than anybody else‘s on the market, but metal platters inherently have a disadvantage: resonance. Our TPE (thermoplastic elastomer) technology now helps to damp the resonance completely and also increases the weight to 1,7 kg. Because the TPE is mounted to the inside of the platter‘s rim, the moving energy will also create a flywheel effect. The result is an even quieter and noiseless operation with less wow and flutter. Clean Look & New Colours You wont find any button, switch or printing on the plinth to ensure the luxurious aesthetics. The speed control switch has been moved to the bottom of the plinth, to keep the clean look the Debut is known for. The Debut Carbon EVO is not only timeless by offering traditional high-gloss black, white and red finishes or our fabled real-wood walnut veneer. Completely new, unique and trend-setting are the beautifully realized satin signature finishes in 5 different variations. From the record to your amplifier. Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) The Tonearm 8,6 inch carbon The new Debut Carbon EVO features the proven 8,6‘‘ one piece Carbon tonearm design. The super stiff, but lightweight tonearm delivers an insane sound quality with a convincing sound stage. Output Gold plated sockets You can always change your RCA output cable and upgrade it with your preffered one. The gold plated connectors will always provide the best connection. Phono Cable Semi-balanced RCA cable To guarantee a perfect connection to your amp you will find a high-quality phono RCA cable in the box. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding.

Tuner Box S2 – A lot of radio in a compact box This small FM-only tuner is fully loaded with high-quality audio and useful features. 99 station presets are more than enough to store your favourite radio stations. Tuner Box S2 can ideally be used in combination with other Box design components. For example, the Trigger In and Out allow you to remotelly power on and off the Tuner Box S2 via a Pre Box S2 Analogue. The included full functional IR-remote and the high-contrast dot-matrix display make this unit a delight to use!

Tuner Box S2 – A lot of radio in a compact box This small FM-only tuner is fully loaded with high-quality audio and useful features. 99 station presets are more than enough to store your favourite radio stations. Tuner Box S2 can ideally be used in combination with other Box design components. For example, the Trigger In and Out allow you to remotelly power on and off the Tuner Box S2 via a Pre Box S2 Analogue. The included full functional IR-remote and the high-contrast dot-matrix display make this unit a delight to use!

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

Compact record cleaning machine The VC-E is a compact and very affordable record cleaning machine. Regardless of its size and price, the VC-E offers a lot of features: The aluminium surface of the VC-E is able to withstand excessive fluid spill without compromising the chassis. The VC-E is super powerful and cleans records in as little as one or two rotations. The very best results are achieved with one rotation forward followed by one backwards. It turns the record superfast within 2 seconds per rotation, which is about 3 times faster than comparable cleaning machines. The result is a much faster and more effective cleaning process. A clamp seales the record label from cleaning fluid and avoids damage on the label. The robust metal arm is easy to use, mechanically stable and focuses all suction power directly onto the record surface. Our eco-friendly and non-alcoholic vinyl cleaning concentrate, Wash-IT, offers very good cleaning results and reduces static charge, so record wear and stylus wear are significantly reduced. If you are looking for a compact and yet affordable record cleaning machine, the VC-E is definitely your choice.

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

The X2 is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise. Inside, it houses a sophisticated DC/AC generator board which, combined with the convenient speed control board, delivers clean and stable power to the silent motor system. To get the best performance out of it, we have improved the motor suspension. Remaining vibrations are damped and eliminated, so they are not transmitted onto the chassis, platter and cartridge. The X2‘s motor chassis is carefully balanced and suspended on a precision tuned TPE belt; this way the motor chassis is effectively decoupled from the main plinth for optimal performance. It is free floating, horizontally completely level and able to operate at the highest performance levels. In the X2, the motor drives a new, heavy, non-resonant Acryl platter via a sub-platter drive system and a premium grade main bearing for liquid smooth rotation. The new 9” carbon/ aluminium sandwich construction tonearm  results in better internal damping. This also means, the entire tonearm bearing is upgraded to compensate for the extra mass; altogether tracking will be more precise, stable and accurate. The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50% Supplied either with or without a premium Pick it 2M-Silver cartridge it can be ready to play within a few minutes of unboxing. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use. Lastly, height-adjustable feet in their Alu/ TPE sandwich construction are a very exclusive but necessary feature to level the turntable and effectively isolate it from the surface it is placed on. Features: Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability Electronically regulated precision motor with improved damping construction for the least amount of vibration and noise Sub-platter with extremely low 0.001mm bearing tolerances Stainless steel platter-bearing with soft bronze bushing and teflon mirrors for lowest rumble and noise, and a stable, accurate speed transmission 9” one-piece tonearm tube with best internal damping by the ultra rigid carbon/alu sandwich construction TPE damped counterweight reduces arm-cartridge resonances by 50% Azimuth and VTA adjustement Pick it 2M Silver super fast, super precise MM cartridge with silver coils Resonance free, 2 kg heavy acryl platter Heavy, 50mm thick, highest quality CNC‘d MDF chassis Luxury 8 layers of painting and hand-polished finish or real-wood, satin-waxed veneer Super shielded, semi-symmetrical, low-capacitance phono cables - purpose designed by Pro-Ject Hight adjustable, alu machined, vibration absorbing feet Handmade in Europe Technical Specifications: Speed 33, 45, 78 (electronic speed change) Principle belt drive Platter 30mm thick acryl, 2 kg heavy acryl Main bearing Stainless steel Speed variance 33: +/-0,25%; 45: +/-0,20% Wow & flutter 33: +/-0,12%; 45: +/-0,10% Signal to Noise 70 dB Tonearm 9” carbon/aluminium sandwich tonearm Effective arm length 9“/230 mm Effective tonearmmass 13.5 g Overhang 18.0 mm Tracking force range 0 - 30mN (18mN recommended for Pick it 2M Silver) Included accessory 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat Power consumption 4.5 W max / 0.3 W standby Dimensions 460 x 150 x 340 mm (WxHxD) lid closed Weight 10 kg net

Tube phono-preamplifier Innovative miniature sized phono preamplifier with tube output and high end sound! Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound. Features:  Suitable for MM and MC cartridges Precise RIAA equalisation in two parts, passive/active Fully discreet circuit design without OpAmps 2x ECC83 tubes (replaceable) Front-sided Subsonic filter button Front-sided Gain control Ultra low noise circuitry with FET input stage Dual mono circuitry for optimized channel separation Polystyrene capacitors used where possible Gold-plated RCA in- and outputs External power adaptor and multiple internal power supplies Well-filtrated high-voltage anode power supply Sandwich alu/metal casing protects from vibrations and electromagnetic interference Available in silver or black Specifications:  Tubes 2 x ECC83 (12AX 7A) Input impedance 10 ohms, 100 ohms, 1 kohm, 2 kohms Input capacitance/impedance 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence! Input gain 40 dB, 43 dB / 50 dB, 60 dB und 63 dB Noise floor 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain THD

Tube phono-preamplifier Innovative miniature sized phono preamplifier with tube output and high end sound! Tube Box S2 is our very first product to feature a fully discreet circuit design without using any operational amplifiers (OpAmps). It also is the first product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his preference. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplifier. It offers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohm input impedance setting is fixed and suited for high output MC cartridges. The aluminium/metal casing is adapted to our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound. Features:  Suitable for MM and MC cartridges Precise RIAA equalisation in two parts, passive/active Fully discreet circuit design without OpAmps 2x ECC83 tubes (replaceable) Front-sided Subsonic filter button Front-sided Gain control Ultra low noise circuitry with FET input stage Dual mono circuitry for optimized channel separation Polystyrene capacitors used where possible Gold-plated RCA in- and outputs External power adaptor and multiple internal power supplies Well-filtrated high-voltage anode power supply Sandwich alu/metal casing protects from vibrations and electromagnetic interference Available in silver or black Specifications:  Tubes 2 x ECC83 (12AX 7A) Input impedance 10 ohms, 100 ohms, 1 kohm, 2 kohms Input capacitance/impedance 47pF, 147pF, 267pF, 367 pF, 487 pF and 587 pF* / 47 kohms, Together with other input impedance settings without any influence! Input gain 40 dB, 43 dB / 50 dB, 60 dB und 63 dB Noise floor 80 dB (A weighted) at 40 dB input gain, 75dB (A weighted) at 50 dB and 63 dB input gain THD

Tube phono-preamplifier Premium phono preamplifier with tube output and highend sound! This precision tube phono pre-amplifier benefits from outstanding circuit technology from Dr. Sykora and uses ultimate components. Compatible with both MM and MC cartridges. It offers connection for two turntables plus two selectable line outputs and a continuously variable selection of input impedance for low output MC cartridges while playing a record! Other features include input capacitance for MM cartridges and switchable subsonic, that prevents your amplifier and speakers of ultra low rumble below 20Hz. All components including tube output and polypropylene capacitors are audiophile-grade and guarantee a breathtaking sound experience. A perfect upgrade for ambitious vinyl lovers! Features: Suitable for MM and MC cartridges Precise RIAA equalisation Ultra low noise circuitry Selection between 2 phono inputs & 2 line outputs Dual mono circuitry for optimized channel separation Selectable input impedance (for MC: fix or variable) Selectable input capacitance (for MM) Selectable subsonic filter Gold-plated RCA in & outputs Sandwich alu/metal casing protects from vibrations and electromagnetic interference Finishes: silver or black, with/without wooden side panels (rosewood, walnut, eucalyptus) Specifications: Tubes 2 x ECC83 (12AX7) Input impedance Variable 10-1000 Ohm, fix 47 kOhm Capacitance 100 / 220 / 320 pF Gain MM / MC 40 / 45 / 50 / 60 / 65 dB Output voltage typically 500 mV/1kHz at 5mV/1kHz (at 40dB) SNR 88 dBA THD < 0.04% RIAA curve accuracy +/- 0.2dB/20Hz - 20kHz Subsonic filter 20Hz @ 12dB/octave Inputs 2 x Phono (RCA) Outputs 2 x Line (RCA) Power supply 18V/1000mA DC Power consumption max 490mA DC / < 0.5 Watt Standby Dimensions B x H x T 206 x 91 x 227 mm (Alu) 240 x 93 x 227 mm (Wood) Weight (without power supply) 1500 g (Alu) 1960 g (Wood)

Tube phono-preamplifier Premium phono preamplifier with tube output and highend sound! This precision tube phono pre-amplifier benefits from outstanding circuit technology from Dr. Sykora and uses ultimate components. Compatible with both MM and MC cartridges. It offers connection for two turntables plus two selectable line outputs and a continuously variable selection of input impedance for low output MC cartridges while playing a record! Other features include input capacitance for MM cartridges and switchable subsonic, that prevents your amplifier and speakers of ultra low rumble below 20Hz. All components including tube output and polypropylene capacitors are audiophile-grade and guarantee a breathtaking sound experience. A perfect upgrade for ambitious vinyl lovers! Features: Suitable for MM and MC cartridges Precise RIAA equalisation Ultra low noise circuitry Selection between 2 phono inputs & 2 line outputs Dual mono circuitry for optimized channel separation Selectable input impedance (for MC: fix or variable) Selectable input capacitance (for MM) Selectable subsonic filter Gold-plated RCA in & outputs Sandwich alu/metal casing protects from vibrations and electromagnetic interference Finishes: silver or black, with/without wooden side panels (rosewood, walnut, eucalyptus) Specifications: Tubes 2 x ECC83 (12AX7) Input impedance Variable 10-1000 Ohm, fix 47 kOhm Capacitance 100 / 220 / 320 pF Gain MM / MC 40 / 45 / 50 / 60 / 65 dB Output voltage typically 500 mV/1kHz at 5mV/1kHz (at 40dB) SNR 88 dBA THD < 0.04% RIAA curve accuracy +/- 0.2dB/20Hz - 20kHz Subsonic filter 20Hz @ 12dB/octave Inputs 2 x Phono (RCA) Outputs 2 x Line (RCA) Power supply 18V/1000mA DC Power consumption max 490mA DC / < 0.5 Watt Standby Dimensions B x H x T 206 x 91 x 227 mm (Alu) 240 x 93 x 227 mm (Wood) Weight (without power supply) 1500 g (Alu) 1960 g (Wood)

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford. The new DEBUT CARBON ESPRIT (DC) was designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance. This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  Features:Lifestyle for vinyl fans  8,6” carbon tonearm  Heavy non resonant acrylic platter  New DC power supply with ultra precision frequency DCdriven AC generator (like Speed Box) for ultimate speed stabilityPrecision belt drive with synchronous motor  New TPE motor suspension  Magnetic cartridge 2M red from Ortofon  Specifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm acrylic platterMains bearing : stainless steelWow & flutter : +/- 0,10%Speed drift : +/- 0,80%Signal to noise : - 68dBTonearm : 8,6”, CarbonEffective arm length : 218,5 mmEffective arm mass : 6,0 gOverhang : 18,5mmTracking force : 10 - 30mNIncluded accessories : RCA cable, lidPower connection : 110/120 or 230/240 Volt - 50 or 60 HzDimensions : 415 x 118 x 320mm (WxHxD) lid closed / Weight : 5,6 kg netCartridge : Ortofon 2Mred 

High fidelity aptX Bluetooth audio receiver Bluetooth Box E: Wireless streaming at an absolute bargain price! Smartphones and tablets offer the possibility to stream music wireless via Bluetooth. The Bluetooth Box E is the cost-effecti­ve solution to use this possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CDquality can be received. Pairing of mobile devices with the Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smart­phones and tablets are memorized. Analogue and digital connections to an amplifier or an external D/A converter are provided for ultimate flexibility. Features Wireless music streaming with almost CD-quality Bluetooth 2.1 + EDR Supports aptX & SBC codecs Easy to install and use Fast auto pairing (3 to 5 seconds) Bluetooth 2.1 + EDR Supports aptX & SBC codecs Easy to install and use Fast auto pairing (3 to 5 seconds) Up to 8 different Bluetooth sources are memorized Works within a range of approximately 10 meters RCA analogue and Toslink digital outputs (switchable) Outboard power supply included Black or White casing

High fidelity aptX Bluetooth audio receiver Bluetooth Box E: Wireless streaming at an absolute bargain price! Smartphones and tablets offer the possibility to stream music wireless via Bluetooth. The Bluetooth Box E is the cost-effecti­ve solution to use this possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CDquality can be received. Pairing of mobile devices with the Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smart­phones and tablets are memorized. Analogue and digital connections to an amplifier or an external D/A converter are provided for ultimate flexibility. Features Wireless music streaming with almost CD-quality Bluetooth 2.1 + EDR Supports aptX & SBC codecs Easy to install and use Fast auto pairing (3 to 5 seconds) Bluetooth 2.1 + EDR Supports aptX & SBC codecs Easy to install and use Fast auto pairing (3 to 5 seconds) Up to 8 different Bluetooth sources are memorized Works within a range of approximately 10 meters RCA analogue and Toslink digital outputs (switchable) Outboard power supply included Black or White casing

CounterWeight for Essential, Debut,RPM turntables

Ιμάντες για τα πλατό Pro-ject (FLATBELT)Επίπεδος ιμάντας 1 mm σε πάχος και πλάτος 4 mmΣυνολικό μήκος = 490 mm  Ιμάντες για τα πλατό Pro-ject (FLATBELT) Επίπεδος ιμάντας 1 mm σε πάχος και πλάτος 4 mm  Συνολικό μήκος =  490 mm

With the Stream Box S2 Ultra we have designed a completely new product in the streaming world. It features never seen control scenarios and unprecedented audio performance. Its main goal is to be a universal device that can get any USB DAC into the network, upgrading your favourite high-end DAC with modern and future proof streaming capabilities.With the gaining ground of internet streaming services, such as TIDAL or Spotify, the consumer‘s interest has shifted towards network enabled devices. Many great sounding products though do not offer any network ability, either because they are too old or their main focus was not on this subject. The solution has often been to replace them with a new and modern device, stream audio via Bluetooth or to comprimise and use a smartphone or tablet via their analogue ouput to feed active speakers or amplifiers.Stream Box S2 Ultra closes the gap, it offers modern connectivity with its network inputs and USB A output.This USB output is perfectionized for audio signals, it uses a dedicated internal power supply and only top audiophile grade components. You won‘t run into file-support issues, as Stream Box S2 Ultra acts as a network bridge, bypassing the files directly to your digital to analogue converter. Since most DACs only have one USB input, we have designed Stream Box S2 Ultra also to be a USB detox device. Simply connect your PC to the micro USB input of the unit and connect our DAC to the audio output. This way you can clean the noisy signal of your PC, while enjoying your music with it.The new remote control iOS and Android App is based on an opensource project and has a large community behind it. This guarantees full support and future improvements. Stream Box S2 Ultra is fully remoteable via smart devices and a regular web-browser. It offers support for the most popular streaming services: Spotify and TIDAL. Both services offer you a sheer endless amount of music, guaranteeing you, that you never run out of music to listen to. By implementing Shoutcast, we also give you the option to listen to various internet radio stations. You can listen to your favourite radio shows, the news and discover new channels from all around the world – with just a few clicks.The back-sided HDMI video output lets you connect your monitor to the Stream Box S2 Ultra. It will then show you the graphic user interface, ready to act on your commands. With the implementation of Shairport we were even able to give the iDevice users out there another possibilty to send data to our Stream Box S2 Ultra.There are two USB inputs on Stream Box S2 Ultra, one front sided and one back sided. Both give you the possibi-lity to connect an external harddrive to the unit. Via one of the various control scenarios (App, Webbrowser, external monitor) you can pick from your own selection of audio. The file system support goes up to PCM 32bit / 352.8 kHz and DSD256.Here at Pro-Ject, we are big supporters of the Roon software, that is why we wanted the Stream Box S2 Ultra to be Roon Ready. This way you can simply pick your Stream Box S2 Ultra in the Roon interface and send bit-perfect audio streams to it over your network. This incredible feature set makes Stream Box S2 Ultra bullet-proof for all future events. Together with Pre Box S2 Digital they become the most versatile and audiophile set in its price class. Features:High resolution network bridgeAudio optimized USB A outputMulti-room enabledDual USB A input for external storageTIDAL supportedSpotifyNetwork-enables any modern DAC with USB inputInternet RadioDLNA enabledBypasses all audio formats to the DACCleans up the audio signal from a PCRoon Ready (in progress)ShairportBluetoothUses dedicated power suppliesHDMI video outputControllable via smart devices and PC/LaptopNew control app!Ethernet and WiFi connectivity 

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford. The new DEBUT CARBON ESPRIT (DC) was designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance. This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  Features:Lifestyle for vinyl fans  8,6” carbon tonearm  Heavy non resonant acrylic platter  New DC power supply with ultra precision frequency DCdriven AC generator (like Speed Box) for ultimate speed stabilityPrecision belt drive with synchronous motor  New TPE motor suspension  Magnetic cartridge 2M red from Ortofon  Specifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm acrylic platterMains bearing : stainless steelWow & flutter : +/- 0,10%Speed drift : +/- 0,80%Signal to noise : - 68dBTonearm : 8,6”, CarbonEffective arm length : 218,5 mmEffective arm mass : 6,0 gOverhang : 18,5mmTracking force : 10 - 30mNIncluded accessories : RCA cable, lidPower connection : 110/120 or 230/240 Volt - 50 or 60 HzDimensions : 415 x 118 x 320mm (WxHxD) lid closed / Weight : 5,6 kg netCartridge : Ortofon 2Mred 

Outstanding performance from a compact and luxurious turntable configuration  2Xperience SB S-Shape is based on the 2Xperience belt-drive concept which incorporates over 25 years of turntable design experience.The addition of precision motor control with electronic speed changing and a highend 9" S-shape aluminium tonearm means playback quality is vastly improved. The heavy chassis is made from MDF using a non-resonant construction technique. The turntable platter is built with heavy, non-resonant materials in a precisely balanced sandwich configuration. A vinyl layer acts as the perfect turntable mat.A screwable, precision diamond cut and light-weight record clamp eliminates unwanted record vibration and rumbling of the main platter bearing. The audio performance of the final product benefits from the resonance-free platter, avoiding the ringing effect of common metal and glass platters. An acrylic dust cover is also included.  The top grade aluminium S-Shaped tonearm convinces with a harmonic, musical and engaging sound. Because of the detachable headshell it is very easy to swap out cartridges. For your daily use you can utilize an MM system and for the pure listening pleasure you can change to an MC system.   Features:Electronic speed control with 33/45 rpm speed change, which acts as “Speed Box” with ultimate speed stability  Precision balanced sandwich-platter with vinyl mat   Record clamp tightens record to platter  MDF chassis  Audiophile grade 9” S-Shape aluminium tonearm  Inverted tonearm bearings (ABEC 7 quality)   Specifications:Speed: 33, 45 (electronic speed change)Drive principle: belt drivePlatter: 300mm MDFMains bearing: stainless steelWow & flutter: +/- 0,08%Speed drift: +/- 0,5%Signal to noise: - 70dBEffective arm length: 230 mmEffective arm mass: 8,5 gOverhang: 18 mmTracking force: 10 - 30mNIncluded accessories: 15 volts DC / 800 mA power supply, dust coverPower connection: 110/120 or 230/240 Volt - 50 or 60 HzPower consumption: 4 watt max / < 0,5 watt standbyDimensions: 460 x 160 x 360 mm (WxHxD) lid closedWeight: 7,7 kg net

Reference class phono preamplifier with unique impedance control   This ultra low noise and distortion preamplifier is made for the audio conniosseur and offers not only breathtaking performance but is capable to adapt to virtually any phono cartridge through variable impedance control. Impedance adjustment can be done while playback! Due to use of best parts, like SSM2019 from Analog Devices as input stages and Linear Technology LT1010 as high current buffer stage, Phono Box RS delivers ultra low levels of distortion and noise. Its very low output impedance makes it insensitive to selection of interconnect cables and lenghts.  Fully passive RIAA and DECCA equalisation is selectable. Phono Box RS offers fully balanced circuitry and both XLR and RCA inputs and outputs. All in all vinyl playback will never have sounded as clear, detailed and smooth, than with this superlative phono stage!   Recommended accessoires:   The addition of linear power supply Power Box RS Phono (SRP € 499,00) adds even more depth and lets you hear all microscopic fine detail.   Features:MM & MC capable  True dual mono design  Balanced XLR & unbalanced RCA In & Outputs  Fully passive RIAA & DECCA equalisation  Unique continously variable input impedance loading,    matches every cartridge (adjustment even while playing)  RCA & XLR In & Out  Superior low noise / low distortion  Classy & elegant dip switches  DC power supply (< 1 watt standby power)  Metal casing protects against vibration and interference  Faceplate silver or black  

Reference class phono preamplifier with unique impedance control   This ultra low noise and distortion preamplifier is made for the audio conniosseur and offers not only breathtaking performance but is capable to adapt to virtually any phono cartridge through variable impedance control. Impedance adjustment can be done while playback! Due to use of best parts, like SSM2019 from Analog Devices as input stages and Linear Technology LT1010 as high current buffer stage, Phono Box RS delivers ultra low levels of distortion and noise. Its very low output impedance makes it insensitive to selection of interconnect cables and lenghts.  Fully passive RIAA and DECCA equalisation is selectable. Phono Box RS offers fully balanced circuitry and both XLR and RCA inputs and outputs. All in all vinyl playback will never have sounded as clear, detailed and smooth, than with this superlative phono stage!   Recommended accessoires:   The addition of linear power supply Power Box RS Phono (SRP € 499,00) adds even more depth and lets you hear all microscopic fine detail.   Features:MM & MC capable  True dual mono design  Balanced XLR & unbalanced RCA In & Outputs  Fully passive RIAA & DECCA equalisation  Unique continously variable input impedance loading,    matches every cartridge (adjustment even while playing)  RCA & XLR In & Out  Superior low noise / low distortion  Classy & elegant dip switches  DC power supply (< 1 watt standby power)  Metal casing protects against vibration and interference  Faceplate silver or black  

Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover.   Essential III comes in the aesthetic high gloss colors black, red and white.   Specifications:Digital (Phono + A/D Converter) and Ortofon OM10eBelt drive with synchronous motor and silicone belt  Diamond cut aluminum drive pulley  Chassis & platter made of resonance in-sensitive MDF  Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability  Low tolerance platter bearing with stainless steel spindle  8,6” aluminum with sapphire bearings  Ortofon OM10 cartridge pre-mounted  High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included  Special decoupling feet  Dust cover included  High-gloss colour options: black, red, white  Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net

Essential III offers a variety of enhancements compared to its successful predecessors, such as a diamond-cut aluminum drive pulley, a resonance-optimized MDF main platter, and MDF chassis. The refined, high-precision platter bearing has significantly lower tolerances than Essential II. Essential III is the audiophile entry turntable! The setup is very simple, the included Phono RCA cable, Connect it E, sounds far above its price range. Equipped with the high-quality pickup OM10 by the phonographic cartridge pioneer Ortofon, Essential III delivers lively, balanced and highly involving sound that will delight every vinyl lover.   Essential III comes in the aesthetic high gloss colors black, red and white.   Specifications:Speed Box and Ortofon OM10eBelt drive with synchronous motor and silicone belt  Diamond cut aluminum drive pulley  Chassis & platter made of resonance in-sensitive MDF  Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability  Low tolerance platter bearing with stainless steel spindle  8,6” aluminum with sapphire bearings  Ortofon OM10 cartridge pre-mounted  High-quality semi-balanced Connect it E phono interconnect with gold-plated RCA connectors included  Special decoupling feet  Dust cover included  High-gloss colour options: black, red, white  Counterweight for mass : 3 - 5,5g (included)Tracking force range: 0 - 25mn (OM5 18mn recommended)Included accessory: power supply, dust coverPower consumption: 4,5 watts maxDimensions: 420 x 112 x 330mm (WxHxD)Weight: 5,0 kg net