Pro-Ject

Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems. The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in red.Features:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio  Perfect solution if only a digital input is available  Easy set-up  Belt drive with silicone belt and low vibration motor  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge pre-mounted  Built-in phono pre-amplifier with analogue & digital out  Gold-plated RCA interconnect cable included  Special turntable feet for effective decoupling  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included) 

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

Clear acrylic dust cover, suitable for smaller Pro-Ject turntables.Weight: 2,9kg Outside dimensions: 460 x 225 x 365mmInside dimensions: 450 x 220 x 355mm

Dust protection cover. Crystal clear acrylic cover for turntables   4 models protect turntable and needle  Weight: 4,3kg Outside dimensions: 525 x 290 x 425mmInside dimensions: 515 x 285 x 415mm

Carbon-fibre brush for record cleaning.

Turntable mats have been always a big discussion how they influence the sound. The interaction between the record and the surface can be tracked very easily by the supersensitivity of a good pick up cartridge.  Common felt mats give a smooth contact between record and platter but has the disadvantage with static. That means that feltmats often collect a lot of dust which can be then transfered to the record. Also the damping ability is very limited which can be a problem with metal platters. Thick rubbermats overdamp the record and have an isolation effect which leaves the static on the record and hearable noise clicks are the result.  Leather and Cork are 2 different but very interesting options to upgrade the sound quality. Resonances Are damped more effectively than felt, they keep dust away and they have also enough contactivity to avoid static.  What is better depends on taste and the actual platter design.A very costeffectiv way to improve the sound and have less noise by static and dust. You can hear a difference!  

Individual colours give your turntable a very special appearance. 

Clean your valuable vinyls gentle, but efficient! Clean records sound much better and help to protect the  stylus from dust. Spin Clean clears manually and is suitable for all kinds of records: LP‘s, 45‘s, 78‘s  Spin Clean Record washer system includes all necessary parts: 4 oz. (118ml) washer fluid, 2 brushes and dryer cloths. The cleaning process is extremely simple! First you fill distlled water into the basin, than you add washer fluid and insert the record you want to clean.  Both sides of the record are clarified in one go and dust remains at the bottom of the basin. Of course all components of Spin-Clean are available as accessory!  

The Clean it carbon fibre stylus cleaning brush is suitable for daily cleaning of the stylus. The stylus brush is the best tool for quick maintenance and daily cleaning of your needle tip. Clean it gently removes dust and crustification with thousands of the finest carbon fibres. The result is a clean and good sounding diamond stylus that ensures a perfect reproduction of your records.  Specifications: Smooth cleaner for diamant stylus   Conductive carbon fibers   Eliminates static charges   Removes finest dust particles   

Fits all brands and types of turntables and places your 7“ vinyls exactly centrally on the turntable. Adapt it is made from nonmagnetic metal, that makes it look first-class. Unlike cheap plastic solutions, Adapt it is unbreakable and doesn‘t gets lost easily! Specifications: Adaptor for use with 7-inch single records   Locates record centrally on turntable   No plastic - precision CNC-machined   Non-magnetic aluminium   Suitable for all brands and types of record players   2 colour options: black or blue  

Fits all Pro-Ject tonearms and allows qualified personnel to optimise bearing adjustment,when bearings are misadjusted, because of unassured transport of a turntable. If you are not sure about correct adjustment, please contact your local dealer!  CAUTION: Misuse of this adjustment tool may damage tonearm bearings! Specifications: Suitable for all Pro-Ject tonearms   Allows fine adjustment of bearings, if misadjusted   Caution: for qualified personnel only   Includes 2 inserts for different bearings   Full metal (aluminium & brass)  

Control of turntable speed.

Vinyl sound can be significantly improved, when unwanted resonances between record and platter can be reduced, while playback. Therefore surfaces of record and platter should connect tigthly.  Standard record pucks, that use weight to achieve this, have 2 disadvantages:  1) The weight can induce higher levels of rumble, when used with lower cost turntables which have less massive main bearings  2) Instead of tightening the records surface to the platter, heavy weight record pucks can cause the opposite: Vinyl will get shaped like a bowl with no contact of the outer edges of the record to the platter.  Clamp it is the real solution, an accessory with a clamp mechanism around the center spindle, that will not add weight, which would induce rumble. You can fine-adjust pressure according condition of your warped records. Fitting of Clamp it is easily done within seconds. This accessory will not only please your ears, its beautifully machined diamond-cut edges will also look extremely cool on any turntable!  Specifications: Sound improvement for all turntables   Reduces unwanted resonances while playback   Fast and easy mounting  • Fine-adjustment of thightening force   Full metal accessory with leather coating   Diamond cut finish  

The Q UP is a high precision device that safely lifts your tonearm at the end of the record. The Q UP can be installed in minutes, without tools, and is designed to fit on most manual turntables. Based upon a trigger and lift design, now reborn and modernized to work with either classic or contemporary turntable / tonearm combinations. The Q UP can be configured for a variety of tonearm heights, thicknesses and shapes. The Q UP only interacts with the tonearm at the end of record and does NOT adversely effect the tonal quality of your system in any way. No need to worry about falling asleep with your record playing or forgetting it is playing if you get distracted.Specifications: Lifts tonearm, when it moves to the end of a record   Extends stylus life   Suits nearly all tonearms and manual turntables   Includes three stackable platforms for turntables with thick platters   Adjustable trigger sensitivity   No AC or battery power needed   Easy to mount, no additional tools necessary

Spirit level for optimum positioning of a turntable. 

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system&#39;s built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver&#39;s line-level inputs, and you&#39;re ready to enjoy your LP collection all over again. Pro-Ject&#39;s clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications:compatible with moving magnet and moving coil phono cartridgesexternal power supply for reduced noise and interferencegold-plated input and output jacks for solid, corrosion-free connectionsdual-mono circuitry for optimal channel separationsmall size allows placement near turntableinput impedance: 47 kohms/120pF (MM); 100ohms/120pF (MC)gain: 40dB (MM); 60dB (MC)signal-to-noise ratio: 86dB (MM); 68dB (MC)THD: 0.01% (MM); 0.05% (MC)RIAA response accuracy: 0.5dB (20-20,000 Hz)4-1/8"W x 1-1/2"H x 5-3/8"D

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system&#39;s built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver&#39;s line-level inputs, and you&#39;re ready to enjoy your LP collection all over again. Pro-Ject&#39;s clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications: Preamplifier for MM or MC with switch on rear panel   NEW „green“ DC power supply (< 1 watt standby power)   Precise RIAA equalisation   High quality A/D conversion with USB out to PC/Mac   Compatible with Windows®, MacOS®   SMD technology for shortest signal paths   Gold-plated RCA sockets   Output stage with ultra-low impedance   Available in black and silver

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system&#39;s built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver&#39;s line-level inputs, and you&#39;re ready to enjoy your LP collection all over again. Pro-Ject&#39;s clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications: Preamplifier for MM or MC with switch on rear panel   NEW „green“ DC power supply (< 1 watt standby power)   Precise RIAA equalisation   High quality A/D conversion with USB out to PC/Mac   Compatible with Windows®, MacOS®   SMD technology for shortest signal paths   Gold-plated RCA sockets   Output stage with ultra-low impedance   Available in black and silver

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system&#39;s built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver&#39;s line-level inputs, and you&#39;re ready to enjoy your LP collection all over again. Pro-Ject&#39;s clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications:compatible with moving magnet and moving coil phono cartridgesexternal power supply for reduced noise and interferencegold-plated input and output jacks for solid, corrosion-free connectionsdual-mono circuitry for optimal channel separationsmall size allows placement near turntableinput impedance: 47 kohms/120pF (MM); 100ohms/120pF (MC)gain: 40dB (MM); 60dB (MC)signal-to-noise ratio: 86dB (MM); 68dB (MC)THD: 0.01% (MM); 0.05% (MC)RIAA response accuracy: 0.5dB (20-20,000 Hz)4-1/8"W x 1-1/2"H x 5-3/8"D

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours ​​

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.  Belt drive system with low vibration DC motor   Central gravity mass point made from artificial stone   Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom   Low resonance MDF platter with felt mat   8,6” ultra low mass tonearm with straight arm tube   Pre-adjusted tracking force & antiskating   Gold-plated RCA contacts & cartridge pins   Colour options: red-black, white-black, silver-black  Specifications:speed : 33, 45 (manual speed change)Speed variance: 33: 0,2% 45: 0,18%Wow & flutter: 33: 0,14% 45: 0,13%platter: 300mm MDFtonearm: 8,6” metal tubeeffective arm length: 218,5 mmoverhang: 22,0 mmeffective tonearmmass: 8,0grcounterweight for cartridge mass: 3 - 5,5g (included)tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)output: RCA to phono inputincluded accessory: RCA cable, 15V DC power supplypower consumption: 4,0 wattsdimensions: 430 x 90 x 300mm (WxHxD)weight: 2,7 kg net

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.  Belt drive system with low vibration DC motor   Central gravity mass point made from artificial stone   Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom   Low resonance MDF platter with felt mat   8,6” ultra low mass tonearm with straight arm tube   Pre-adjusted tracking force & antiskating   Gold-plated RCA contacts & cartridge pins   Colour options: red-black, white-black, silver-black  Specifications:speed : 33, 45 (manual speed change)Speed variance: 33: 0,2% 45: 0,18%Wow & flutter: 33: 0,14% 45: 0,13%platter: 300mm MDFtonearm: 8,6” metal tubeeffective arm length: 218,5 mmoverhang: 22,0 mmeffective tonearmmass: 8,0grcounterweight for cartridge mass: 3 - 5,5g (included)tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)output: RCA to phono inputincluded accessory: RCA cable, 15V DC power supplypower consumption: 4,0 wattsdimensions: 430 x 90 x 300mm (WxHxD)weight: 2,7 kg net

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

Audiophile 24bit/96kHz D/A-conversion  Precision D/A chip from Texas Instruments  8 times oversampling  3 Inputs; 1x USB, 1x optical (Toslink), 1 x coax (SPDIF)  Gold-plated RCA line level output sockets  Input selector on front  New stylish S-design  Faceplate in silver or black TECHNICAL SPECIFICATIONS: D/A-converterTexas Instruments TLV320DAC23 8 x Oversampling designSampling rates32kHz, 44,1kHz, 48kHz, 96 kHz (opt & coax)THD95dBDigital inputs1 x coax (S/PDIF) 1 x optical (TOSlink®) 1 x Mini-USBAnalogue out1 pair RCA/CinchOutput voltage1,0VeffDimensions W x H x D103 x 36 x 103 103 x 36 x 115 mm (including sockets)Power supply9V DC / 300mAWeight680g without power supply Software  • To take full advantage of the DAC Box S USB features you have to downlod and install: foobar2000, ASIO support andProJect_asio.dllAthensProAudio is not responsible for any programs downloaded.Make sure your computer is equiped with antivirus programs for its safety.