QSC

The black QSC AcousticDesign AD-S4T Loudspeaker is a surface mounted 70/100V, 4" two-way loudspeaker system, ideally suited for a wide variety of foreground and background sound reinforcement applications. The AD-S4T features a high-quality 4" weather-treated paper cone woofer on a 1" voice coil. It also has a 0.75" silk dome tweeter with a 0.75" voice coil.  Features4.5” weather treated woofer; 0.75” silk dome tweeter120° conical DMT coverage30 watt low-saturation and low-loss 70/100V transformer with 8Ω bypassMaximum peak SPL 110 dB (8 ohm bypass)DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage areaX-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over timeAdvanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-SYS processing or CXD amplifier platformsLightweight ABS enclosures offer long-term durability and lasting good looksSealed input panel cover and powder coated aluminum grilles for added weather resistanceMeets IEC60529 IP-54 for dust and splash resistanceAvailable in black (RAL 9011) or white (RAL 9010)Complete EASE, CF2, CAD, and BIM information available online Specifications:Effective frequency range1: 68 Hz - 20 kHzRated noise power / voltage2: 50 watts / 20 volts (rms)Broadband sensitivity3: 87 dB SPLCoverage angle (-6 dB): 120° conical DMTDirectivity factor (Q): 6Directivity Index: 8 dBMaximum continuous SPL4: 104 dBMaximum peak SPL4: 110 dBRated impedance: 8 ohmsRecommended amplifier power: 100 watts Transformer taps: 70 V: 30, 15, 7.5, 3.75 W and 8Ω bypass, Input connector type: Euroblock connector with parallel output terminalsEnclosure material: Painted ABS polymerGrille material: Powder coated aluminum The price is for 1 speaker.Mounting Bracket Included. Priced as each, Sold in Pairs.

The E118sw is a high-performance direct radiation subwoofer with a single, 800W, 18-inch, aluminum frame woofer. It’s designed to produce crushing low-end for live performance with kick-drum and bass in the PA or for high-level, high-energy dance music. A threaded, M20 pole socket and speaker pole are provided for sub/satellite use with any of the E Series two-way models. For portable applications it includes attachment points for four optional casters. The subwoofer’s 4-ohm impedance means that a single woofer can be optimally powered by a less expensive amplifier. E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.  Features: High output, professional quality sound with  800 W continuous power E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers. E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers: For PLD/CXD visit Amplifier Navigator Software. For GXD visit the GXD Firmware Updater Rugged tour-grade textured paint Foam-lined perforated steel grill E18SW includes speaker pole Model: E118sw Configuration: 1 x 18-inch, subwoofer, non-powered Frequency Response: (-6 dB) 37 Hz to 230 Hz Frequency Range: (-10 dB) 32 Hz to 230 Hz Power capacity1: continuous/peak 800 W / 3200 W Sensitivity: 98 dB, 1 W @ 1 m  Coverage Angle: N/A Ouput2 (peak SPL @ 1 m): 133 dB Drivers: LF: 457 mm (18-inch) driver with 102 mm (4-inch) voice coil, HF: N/A Specificarions: Nominal Impedance: 4Ω Cross-over Recommended: 80 – 120 Hz LPF Input connectors: 2 x NL4, 1 x barrier strip Enclosure: Rectangular, plywood, black texture paint finish. Four side mounted handles. Rear panel provision for optional: 4-inch casters. Perforated, powder-coated steel grille with foam lining. Mounting and suspension: M20 threaded pole-mount socket 24-inch (610 mm) pole included Dimensions: 590 x 616 x 605 mm (WxHxD): 23.2 x 24.2 x 23.8 in Net weight: 43 kg / 95 lbs Shipping weight: 48 kg / 106 lb

The E115 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered. E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.  Features: High output, professional quality sound with E115 – 500 W continuous power E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers. E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers: For PLD/CXD visit Amplifier Navigator Software.For GXD visit the GXD Firmware Updater Titanium diaphragm for high fidelity and long life Rugged tour-grade textured paint Foam-lined perforated steel grill Available U-Style Yoke and M10 rigging kit for permanent installation Dual angle pole socket Model: E115 Configuration: 1 x 15-inch, 2-way, non-powered  Frequency Response: (-6 dB) 55 Hz – 20 kHz Frequency Range: (-10 dB) 43 Hz – 20 kHz Power capacity1: continuous/peak 500 W / 2000 W Sensitivity: 97 dB, 1 W @ 1 m Coverage Angle: 75° conical DMT Output2 (peak SPL @ 1 m): 130 dB Drivers: LF: 381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil. HF: 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver  Specifications: Nominal Impedance: 8Ω Cross-over: Full-range only 1.55 kHz  Input connectors : 2 x NL4, 1 x barrier strip Enclosure: Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining. Dimensions: 16.5 x 28.2 x 17.5 in (WxHxD): 420 x 716 x 445 mm Net weight: 31 kg / 68 lb Shipping weight: 34 kg / 75 lb

The E112 is a trapezoidal, two-way loudspeaker using a 12-inch die cast aluminum woofer with a 3-inch voice-coil. The 15mm, 11-ply enclosure provides enough volume to deliver solid low-frequency extension down to 65 Hz making it an excellent choice for applications in which space or budget preclude the use of a subwoofer. The DMT coverage angle of 85° is ideal for most medium and medium-long throw applications. E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available.Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance.When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.  Features: High output, professional quality sound with 400 W continuous power E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers. E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers: For PLD/CXD visit Amplifier Navigator Software. For GXD visit the GXD Firmware Updater Rugged tour-grade textured paint Foam-lined perforated steel grill Available U-Style Yoke and M10 rigging kit for permanent installation Dual angle pole socket Model: E112 Configuration: 1 x 12-inch, 2-way, non-powered Frequency Response: (-6 dB) 64 Hz – 20 kHz Frequency Range: (-10 dB) 46 Hz – 20 kHz Power capacity1: continuous/peak: 400 W / 1600 W Sensitivity: 96 dB, 1 W @ 1 m Coverage Angle: 85° conical DMT Output2 (peak SPL @ 1m): 128 dB Drivers: LF: 305 mm (12-inch) driver with 76 mm (3-inch) voice coil. HF: 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver  Specifications: Nominal Impedance: 8Ω Cross-over: Full range only, 1.8 kHz Input Connections: 2 x NL4, 1 x barrier strip Enclosure: Trapezoidal, plywood, black texture paint finish. Two side-mounted handles. Perforated, powder-coated steel grille with foam lining. Dimensions: 14.2 x 24.2 x 14.6 in (WxHxD): 360 x 616 x 371 mm Net Weight: 23 kg / 51 lb Shipping Weight: 26 kg / 57.5 lb

QSC E110 Παθητικό ηχείο 10" Χαρακτηριστικά: Frequency Response (-6 dB): 68 Hz – 20 kHz Frequency Range (-10 dB): 50 Hz - 20 kHz Ισχύς: 300 W (RMS) / 1200 W (PEAK) Sensitivity: 95 dB, 1 W @ 1 m Coverage Angle: 85° conical DMT SPL @ 1M: 126 dB Drivers: LF 254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil;              HF 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver Αντίσταση: 8 Ω Cross-ove: Full-range only, 1.8 kHz Είδοσοι: 2 x NL4 1 x barrier strip Καμπίνα: Multi-angle, plywood, black texture paint finish. One top mounted handle. Perforated, powder-coated steel grille with foam lining Mounting: 9 x M8 suspension points, dual angle, 35 mm pole-socket Βάρος: 20 kg Διαστάσεις: 330x560x330 mm

High performance, superior quality and lasting reliability. These are the hallmarks of the QSC brand and the reason why millions of professionals the world-over have come to trust QSC to help them confidently deliver superior experiences and memorable performances. The CP Series follows in that same tradition while also offering an ultra-compact form factor and class-leading value.Features:Compact and powerful performance1000 Watt peak power Class-D amplifier moduleEasily selected contours for commonly-used applicationsAdvanced DSP with Intrinsic Correction™ for superior sound quality and speaker protectionDirectivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage areaLight weight and highly portableProfessional appearance looks great in any applicationUse for main PA, stage monitor, or instrument amplifier35 mm pole socketOptional yoke, tote, and outdoor cover accessoriesComplete EASE and CAD information available online3-Year Warranty*Specifications:LF Driver: 12", coneHF Driver: 1,4" Compression driverFrequency Response (-6 dB): 49 - 20 kHzFrequency Response (-10 dB): 47 - 20 kHzNominal Coverage Angle: 75° AxisymetricMaximum Rated SPL1: 126 dBAmplifier: Class D, Peak: 800 W (LF), 200 W (HF)Controls: Power, 2 x Gain, Mic Boost Push Switch, 6-way Contour Selection SwitchIndicators: Power LED, 2 x Input Signal LED, Input B MIC selected LED, Limiter active LEDConnectors: 2 x locking XLR/F 1/4" combo (Line Input and Mic/Line input), 1 x 3.5 mm TRS (Stereo Input), 1 x XLR/M (Mix Output), 1 x IEC power connectorEnclosure Material: PolypropyleneAttachment Points: M10 threaded insertColor: Black (RAL 9011)Grille: 18 Gauge powder-coated steelDimensions: 516 x 350 x 323 mmNet Weight: 13,7kgShipping Weight: 16,5kgRegulatory: EMC, UL, CBOptional Accessories: CP12 Tote, CP12 Outdoor Cover, CP12 Yoke

High performance, superior quality and lasting reliability. These are the hallmarks of the QSC brand and the reason why millions of professionals the world-over have come to trust QSC to help them confidently deliver superior experiences and memorable performances. The CP Series follows in that same tradition while also offering an ultra-compact form factor and class-leading value.Features:Compact and powerful performance1000 Watt peak power Class-D amplifier moduleEasily selected contours for commonly-used applicationsAdvanced DSP with Intrinsic Correction™ for superior sound quality and speaker protectionDirectivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage areaLight weight and highly portableProfessional appearance looks great in any applicationUse for main PA, stage monitor, or instrument amplifier35 mm pole socketOptional yoke, tote, and outdoor cover accessoriesComplete EASE and CAD information available online3-Year Warranty*Specifications:LF Driver: 8", coneHF Driver: 1,4" Compression driverFrequency Response (-6 dB): 56 - 20 kHzFrequency Response (-10 dB): 53 - 20 kHzNominal Coverage Angle: 90° AxisymetricMaximum Rated SPL1: 124 dBAmplifier: Class D, Peak: 800 W (LF), 200 W (HF)Controls: Power, 2 x Gain, Mic Boost Push Switch, 6-way Contour Selection SwitchIndicators: Power LED, 2 x Input Signal LED, Input B MIC selected LED, Limiter active LEDConnectors: 2 x locking XLR/F ?” combo (Line Input and Mic/Line input), 1 x 3.5 mm TRS (Stereo Input), 1 x XLR/M (Mix Output), 1 x IEC power connectorEnclosure Material: PolypropyleneAttachment Points: M10 threaded insertColor: Black (RAL 9011)Grille: 18 Gauge powder-coated steelDimensions: 411 x 273 x 256 mmNet Weight: 9,5kgShipping Weight: 11,5kgRegulatory: EMC, UL, CBOptional Accessories: CP8 Tote, CP8 Outdoor Cover, CP8 Yoke

The SPA Series amplifiers from QSC are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.Features:Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loadsENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so they reduce operational costs.Bridgeable outputs for higher power — Bridging the outputs of the SPA2-60 and SPA4-60 provide up to 200 watts into low impedance, and up to 250 watts into 70V or 100V providing outstanding flexibility.Auto-Ramp provides quiet startup and power-down — The EnergyStar Auto-Ramp circuitry ensures quiet and fast power up from Standby and seamless power-down following 28 minutes of inactivity, dramatically reducing power consumption.Rack-mountable 1U, half rack width enclosure — The SPA2-60 and SPA4-60 can be mounted in 1/2 RU reducing rack space requirements. In addition their clever joining brackets enable easy under-table and wall-mounting.Specifications:4 channel mode, watts per channel8Ω dynamic, both channels driven: 60 watts4Ω dynamic, both channels driven: 60 watts  Bridged Mode, watts per channel  : 8Ω & 4Ω dynamic: 200 watts70V & 100V: 250 wattsSignal to Noise (A weighted, 20 Hz–20 kHz): >100 dBInput Sensitivity: 1.23 Vrms (+4 dBu)Maximum Voltage Gain: 25.0 dBFrequency Response (20 Hz - 20 kHz): +0.1 dB, -0.1 dBMaximum Input Level: +12.3V (+24 dBu)Front Panel Indicators: Power, per channel Signal, per channel Protect/LimitHighpass Filter: Switchable 80 Hz when Bridged in 70V & 100VControls: 4Ω/8Ω/70V Bridge Highpass On/100V Bridged Highpass On per channel pairDimensions (HWD):: 43 x 220 x 241 mm (1RU)Weight: 1,6 kg 

The SPA Series amplifiers from QSC are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications.Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.Features:Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loadsENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so they reduce operational costs.Bridgeable outputs for higher power — Bridging the outputs of the SPA2-60 and SPA4-60 provide up to 200 watts into low impedance and up to 250 watts into 70V or 100V providing outstanding flexibility.Auto-Ramp provides quiet start-up and power-down — The EnergyStar Auto-Ramp circuitry ensures quiet and fast power up from Standby and seamless power-down following 28 minutes of inactivity, dramatically reducing power consumption.Rack-mountable 1U, half rack width enclosure — The SPA2-60 and SPA4-60 can be mounted in 1/2 RU reducing rack space requirements. In addition, their clever joining brackets enable easy under-table and wall-mounting.Specifications:8Ω dynamic, both channels driven: 60 watts4Ω dynamic, both channels driven: 60 watts Bridged Mode, watts per channel      8Ω & 4Ω dynamic: 200 watts70V & 100V: 250 wattsSignal to Noise: (A weighted, 20 Hz–20 kHz): >100 dBInput Sensitivity: 1.23 Vrms (+4 dBu)Maximum Voltage Gain: 25.0 dBFrequency Response (20 Hz - 20 kHz): +0.1 dB, -0.1 dBMaximum Input Level: +12.3V (+24 dBu)Front Panel Indicators: Power, per channel Signal, per channel Protect/LimitHighpass Filter: Switchable 80 Hz when Bridged in 70V & 100VControls    4Ω/8Ω/70V Bridge Highpass On/100V Bridged Highpass On per channel pairDimensions (HWD):     43 x 220 x 241 mm (1RU)Weight: 1,1 kg​

FeaturesCompact size — up to 2500 watts in two rack spaces, or 5000 watts in three rack spacesHigh-current toroidal transformers, for greater 2-ohm power and low noiseIndependent user-defeatable clip limiters reduce distortionSelectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroomThe 4000-watt RMX4050a operates on a standard 15 amp plug (120V)Both the RMX4050a and the RMX5050a feature a dual mono, high-current power supply for increased reliability and performanceThe RMX4050a's particularly exceptional combination of cooling capacity and electrical efficiency provides robust thermal performance suitable for high continuous power in 2-ohm stereo or 4-ohm bridged applications.Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputsTouch-proof binding post and Neutrik Speakon® outputsFront mounted gain controls for easy accessSignal and clip LED indicators for monitoring performanceIndependent DC and thermal overload protection on each channel automatically protects amplifier and speakers3-year warranty plus optional 3-year extended service contract

The GXD 4 from QSC is a power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 1600W. The GXD 4 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 11.3 lbs. The integrated DSP section includes High and Low-Pass filters (24dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting.Specifications:High peak output power with up to 1600 WPower levels matched to the most popular loudspeakers and optimized for maximum real-world headroom into 4-ohm and 8-ohm speaker systemsClass-D output stage with a universal power supply for high performance and efficiencyExtensive built-in loudspeaker processing, includes high & low-pass filters, 4-band PEQ, limiting, and delayLarge LCD display simplifies amplifier setup and indicates amp statusInputs: Parallel XLR and 1/4” TRS connectors for compatibility with any source while providing convenient loop-thru capabilityPrecision rotary encoders for gain and DSP parameter controlOutputs: Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connectionsDigital Limiting automatically protects the amplifier from damage due to temperature rise or overdriveAdjustable speaker protection to match your loudspeaker’s power and impedanceFront panel LEDs indicate signal presence, input overload, and amplifier clipping

The GDX 8 from QSC is a professional power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 4500W. The GDX 8 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 13.2 lbs. The integrated DSP section includes High and Low-Pass filters (24 dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting. Specifications:4500W Max Power OutputMatched for 4 Ohm and 8 Ohm SpeakersEfficient Class-D Power AmplifierBuilt-In DSP Speaker ProcessorHigh & Low-Pass Filters with 4-Band EQDigital Limiting with Speaker ProtectionLCD DisplayParallel XLR and 1/4" InputsBinding Post and NL4 Speaker ConnectsLightweight: 7.8 kg

QSC RMX 850A. Professional quality performance incorporates road-proven QSC designs.Features: The 4000 watt RMX 4050a operates on a standard 15 amp plug (120V) Both the RMX 4050a and RMX 5050a feature a dual mono, high-current power supply for increased reliability and performance The RMX 4050a provides improved thermal performance yielding higher continuous power in 2 ohm stereo or 4 ohm bridged applications. Compact size — up to 2500 watts in 2 rack spaces or 5000 watts in 3 rack spaces High-current toroidal transformers for greater 2 ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs Touch-proof binding post and Neutrik Speakon® outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract

QSC RMX 2450A. Professional quality performance incorporates road-proven QSC designs. The 4000 watt RMX 4050a operates on a standard 15 amp plug (120V) Both the RMX 4050a and RMX 5050a feature a dual mono, high-current power supply for increased reliability and performance The RMX 4050a provides improved thermal performance yielding higher continuous power in 2 ohm stereo or 4 ohm bridged applications. Compact size — up to 2500 watts in 2 rack spaces or 5000 watts in 3 rack spaces High-current toroidal transformers for greater 2 ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs Touch-proof binding post and Neutrik Speakon outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract

QSC RMX 4050A. Professional quality performance incorporates road-proven QSC designs. The 4000 watt RMX 4050a operates on a standard 15 amp plug (120V) Both the RMX 4050a and RMX 5050a feature a dual mono, high-current power supply for increased reliability and performance The RMX 4050a provides improved thermal performance yielding higher continuous power in 2 ohm stereo or 4 ohm bridged applications. Compact size — up to 2500 watts in 2 rack spaces or 5000 watts in 3 rack spaces High-current toroidal transformers for greater 2 ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs Touch-proof binding post and Neutrik Speakon outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract

QSC RMX 5050A. Professional quality performance incorporates road-proven QSC designs The 4000 watt RMX 4050a operates on a standard 15 amp plug (120V) Both the RMX 4050a and RMX 5050a feature a dual mono, high-current power supply for increased reliability and performance The RMX 4050a provides improved thermal performance yielding higher continuous power in 2 ohm stereo or 4 ohm bridged applications. Compact size — up to 2500 watts in 2 rack spaces or 5000 watts in 3 rack spaces High-current toroidal transformers for greater 2 ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs Touch-proof binding post and Neutrik Speakon outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract

The GX5 uses a Class H system, based on key elements of the PL Series, (PLX, PL3, CX, DCA) almost doubling power in the same size and weight. QSC design expertise allows the output devices to shift from low-power to high-power rails in less than a millionth of a second, ensuring that the output power is always right where it needs to be without excess loss. Both amplifiers use premium toroidal power transformers for reliable "mid-weight" performance. A variable-speed fan moves air crosswise through the amplifier, drawing cool air in over the power transformer, through the fan, and then over the heat sink. This keeps the transformer cool and allows a full size heat sink to fit in a down-sized chassis.Specifications:8 ohms / 1 kHz (both channels driven): 500 W8 ohms / 1 kHz (single channel driven): 600 W4 ohms / 1 kHz (both channels driven): 700 W4 ohms / 1 kHz (single channel driven): 850 W Distortion (1 dB below rated power, 1 kHz): 8 ohms: less than 0.02%, 4 ohms: less than 0.05% Signal to Noise (20 Hz - 20 kHz): 100 dB Input Sensitivity: 1.2 VrmsVoltage Gain (8 ohms): 34.4 dB Output Circuitry: 2-tier Class HPower Requirements (1/8 power, pink noise at 4 ohms, 120V): 6A Frequency Response: 20 Hz - 20 kHz, +0, -1 dB Dynamic Headroom (4 ohms): 2 dB Input Impedance (ohms): Greater than 20k (balanced) Maximum Input Level: +24 dB (16 Vrms) Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced Output Connectors (each channel): Speakon, 1/4", Binding Posts Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection Load protected against DC faults Front Panel Controls and Indicators: Gain controls, 21 detents Red Clip LEDs, proportional, 0.1% THD threshold Green Signal LEDs, threshold -35 dB Blue Power LED, AC on Rear Panel Controls: Full Range / Crossover switch 100 Hz, 3rd order LP (sub), 2nd order HP (top)Dimensions: Height: 3.5" (89 mm) 2RU, Width: 19" (483 mm), Depth: 10.1" (257 mm) Weight: Net: 28 lbs (12.6 kg), Shipping: 32 lbs (14.6 kg)

The GX3 is ideal for speakers in the 300 watt (Program) range, while the GX5 provides full performance for 500 watt (Program) speakers. The GX7 outputs 725 watts into an 8 ohm load. Owners of popular 4 ohm loudspeakers (such as dual-woofer, two-way models) will find the 700 watt (4 ohm) power of the GX5 an ideal match while the GX7's 1000 watts will very capably power many of today's popular subwoofers or two typical 8 ohm speakers per channel.The GX3 uses the latest evolution of the QSC Grounded Collector output system, for optimum cooling of the critical power transistors. A true Class B biasing system combines maximum thermal efficiency with excellent audio performance.Specifications:8Ω / both channels driven / 1 kHz: 300 W8Ω / single channel driven / 1 kHz: 350 W4Ω / both channels driven / 1 kHz; 425 W4Ω / single channel driven / 1 kHz; 500 WDistortion (typical): 20 Hz - 20 kHz: 1 dB below rated power 8Ω: less than 0.05% / 4Ω: less than 0.1%Signal to Noise: (20 Hz - 20 kHz) 100 dBInput Sensitivity: 1.2 VrmsVoltage Gain: (8Ω) 32.2 dBOutput Circuitry: Class BPower Requirements: (1/8 power, pink noise at 4Ω, 120 V) 6.3AFrequency Response: 20 Hz - 20 kHz, +0, 1 dBDynamic Headroom (4Ω): 2 dBDamping Factor: 100Input Impedance (Ω): Greater than 20k (balanced)Maximum Input Level: +24 dB (16 Vrms)Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalancedOutput Connectors (each channel) Speakon®, 1/4", Binding PostsAmplifier and Load Protection: Short circuit, open circuit, thermal, RF protectionLoad protected against DC faultsFront Panel Controls and Indicators: Gain controls, 21 detentsRed Clip LEDs, proportional, 0.1% THD thresholdGreen Signal LEDs, threshold -35 dBBlue Power LED, AC onRear Panel Controls: Full Range / Crossover switch100 Hz, 3rd order LP (sub), 2nd order HP (top)Dimensions (HWD): 3.5" (2RU) x 19" x 10.1" (89 mm x 483 mm x 257 mm)  

The black QSC AcousticDesign AD-S4T Loudspeaker is a surface mounted 70/100V, 4" two-way loudspeaker system, ideally suited for a wide variety of foreground and background sound reinforcement applications. The AD-S4T features a high-quality 4" weather-treated paper cone woofer on a 1" voice coil. It also has a 0.75" silk dome tweeter with a 0.75" voice coil.  Features4.5” weather treated woofer; 0.75” silk dome tweeter120° conical DMT coverage30 watt low-saturation and low-loss 70/100V transformer with 8Ω bypassMaximum peak SPL 110 dB (8 ohm bypass)DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage areaX-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no slippage over timeAdvanced voicing filter sets using QSC Intrinsic Correction™, available through either Q-SYS processing or CXD amplifier platformsLightweight ABS enclosures offer long-term durability and lasting good looksSealed input panel cover and powder coated aluminum grilles for added weather resistanceMeets IEC60529 IP-54 for dust and splash resistanceAvailable in black (RAL 9011) or white (RAL 9010)Complete EASE, CF2, CAD, and BIM information available online Specifications:Effective frequency range1: 68 Hz - 20 kHzRated noise power / voltage2: 50 watts / 20 volts (rms)Broadband sensitivity3: 87 dB SPLCoverage angle (-6 dB): 120° conical DMTDirectivity factor (Q): 6Directivity Index: 8 dBMaximum continuous SPL4: 104 dBMaximum peak SPL4: 110 dBRated impedance: 8 ohmsRecommended amplifier power: 100 watts Transformer taps: 70 V: 30, 15, 7.5, 3.75 W and 8Ω bypass, Input connector type: Euroblock connector with parallel output terminalsEnclosure material: Painted ABS polymerGrille material: Powder coated aluminum The price is for 1 speaker.Mounting Bracket Included. Priced as each, Sold in Pairs.

The QSC K.2 Series represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications. Features:Best in class audio performance2000 Watt Class-D amplifier module Intrinsic Correction™ tuning and  loudspeaker managementDMT™ (Directivity Matched Transition)  design provides excellent power response and consistent performance across the listening areRefined, professional appearance looks great in any applicationRugged ABS enclosure for long life and lasting durabilityDeployment in either main PA or floor monitor positionFactory Presets and savable/recallable Scenes for commonly-used applicationMulti-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contourDual pole cup mounts (standard and 7.5 degree down-tilt)M10 fittings for flown applicationsOptional security panel prevents  unauthorized tampering of controlsComplete EASE and CAD information  available online6-Year Warranty (with product registration)

The QSC K.2 Series represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications. Features:Best in class audio performance2000 Watt Class-D amplifier module Intrinsic Correction™ tuning and  loudspeaker managementDMT™ (Directivity Matched Transition)  design provides excellent power response and consistent performance across the listening areRefined, professional appearance looks great in any applicationRugged ABS enclosure for long life and lasting durabilityDeployment in either main PA or floor monitor positionFactory Presets and savable/recallable Scenes for commonly-used applicationMulti-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contourDual pole cup mounts (standard and 7.5 degree down-tilt)M10 fittings for flown applicationsOptional security panel prevents  unauthorized tampering of controlsComplete EASE and CAD information  available online​

The QSC K.2 Series represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications. Features:Best in class audio performance2000 Watt Class-D amplifier module Intrinsic Correction™ tuning and  loudspeaker managementDMT™ (Directivity Matched Transition)  design provides excellent power response and consistent performance across the listening areRefined, professional appearance looks great in any applicationRugged ABS enclosure for long life and lasting durabilityDeployment in either main PA or floor monitor positionSpecifications:Configuration: Multi-purpose, 2-way powered loudspeakerLF Transducer: 12" (305 mm), coneHF Transducer: 1.4" (35.6 mm) titanium diaphragm compression driverFrequency Response (-6 dB): 50 Hz - 20 kHzFrequency Range (-10 dB): 45 Hz - 20 kHzNominal Coverage Angle: 75° AxisymetricAC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz  AC Power Consumption 1/8th Power2: 100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 AAC Power Consumption - Standby: 2A at any voltage

The KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products.This fixed arcuate, active line array system is ideal for a wide range of portable and permanently installed applications ranging from live entertainment to houses of worship or other venues where a line array system is desired. In addition to DEEP™ DSP algorithm, GuardRail™, Auto Standby, balanced line-level XLR input with an XLR “Thru” connector, Attenuation Control and LED indicators, the KLA181 subwoofer also includes a polarity switch. Features:1,000 watt power module18" vented subwooferHigh acoustic output (135 dB SPL peak)Frequency range down to 33 Hz (-10 dB)Extensive DSP further enhances and protects performancepowerCON® Input and Thru connectionsThreaded pole receptacle for free-standing applications (black models only)Suspension made possible via M10 fittings or KLA12AF Array FrameIntegrated threaded pole mount supports up to two KLA12 enclosures (black models only)Specifications:Powered/Unpowered: PoweredPower Configuration: Single AmpLF Driver Size: 1 x 18"Total Power: 1000WInputs: 1 x XLR (Line, Balanced)Outputs: Dual Balanced XLR Full Range (Line)Impedance: 40k (Balanced), 20k (Unbalanced)Frequency Range: 38Hz (-6dB)Maximum Peak SPL: 135dBEnclosure Material: PlywoodMounting Options: Floor, Fly 

A remarkable new standard for performance in a compact digital mixer, the TouchMix-30 Pro has the features and functionality that will satisfy the most demanding professional while also providing an intuitive workflow that delivers great results, quickly and easily, to users at every level of experience. Perfect for production professionals, musicians and bands as well as live performance venues, its 32 mixing channels (24 Mic/Line, 6 Line, Stereo USB) and 16 outputs offer tremendous signal management flexibility for a wide range of applications.Features:Large (10-inch) multi-touch touchscreen offers more on-screen information while also providing greater hands-on controlAnti-Feedback and Room Tuning Wizards simplify complex equalization tasksTwo real-time analyzers (RTA) provide instantaneous analysis of channel tonal balance and room responseFunction easily duplicates mixes, channels, EQ, dynamics and more.Touch-and-route patch matrix for easy “multing” and rearrangement of inputsEight sub-groups with 6-band full parametric EQ, variable high-pass and low-pass filters and limiter may be linked for stereo32-channel direct-to-hard drive record/playback - capture and recall performances without the need for an external computer32-Channel DAW interface with Apple® computers allows for bidirectional I/O with popular workstation softwareMP3 playback direct from USB24 class-A microphone preamps deliver pristine, studio-quality audioOver 120 live instrument, microphone and other audio source presets created in live environments provide mix-ready channel settingsAll outputs feature 1/3 octave graphic equalization and 6-band parametric EQ plus limiters, delay and 12-band notch filters14 mono mixes may be paired for stereo while two pairs of Auxes can drive wired in-ear monitors (IEM) directlySix stereo effects processors plus pitch-correct offer studio-grade signal enhancements, without sacrificing Auxes or additional channels​​

QSC TouchMix compact digital mixers are designed for musicians, production professionals and live performance venues that need the power and capability of a large “concert” mixing console in a compact, affordable and easy to use form. TouchMix-8 and TouchMix-16 mixers have the functionality to satisfy demanding professionals combined with a range of features and functions that help the less experienced user achieve quality results.The QSC TouchMix Series represents a breakthrough in innovation and digital mixer design - the result of a remarkable collaboration between QSC and industry icons Greg Mackie and Peter Watts (M&W Pro Audio Ltd.) TouchMix not only resets the bar for performance and value, but also redefines the user experience for both professionals and novices alike.Features:Approximately the size and weight of a small laptop computer.Operation via internal color touch-screen and rotary dial, mobile device or both simultaneously.USB Wi-Fi adapter included. No additional network hardware required for remote control.Includes padded carrying case for protection and easy transport.​Eight DCA and eight mute groups.Assign / Un-assign Input to Main Mix*Programmable User-Buttons.*Save your own channel presets and complete mixer scenes to internal memory or USB device.Capturing live performance to multi-track has never been easier. Record 14 tracks (all inputs plus a stereo mix) directly to USB hard-drive. Mix down on TouchMix or import into your favorite DAW.Security Lockout ModesUSB Wi-Fi interface and carrying case are included.

You don’t need a large, complicated mixer to achieve pro-quality live sound, and you don’t need to compromise on power for a simple design that’s easy for anyone to use. With the QSC TouchMix series of digital live sound mixers, you’ve got serious connectivity, routing, and effects processing in an intuitive design. QSC’s TouchMix is versatile enough to manage a wide range of medium- and small-format mixing tasks, while its touchscreen interface and built-in user help make it easy for almost anyone to use. If your goal is to have outstanding sound quality and extensive mix capabilities in the smallest form factor possible, you’ll be impressed with the QSC TouchMix series.Powerful mixers with generous I/O for their compact sizeEasily access all mixing features and processors with the large touchscreen displayEffortless setup thanks to the built-in Wizards, info, and preset librariesPowered aux sends can drive in-ear monitors directlyMix anywhere in the room, thanks to remote control via mobile devices (Wi-Fi interface included)Specifications:20 total inputs: 16 mic, (four with XLR/TRS combo connector) and two stereo line (TRS)Dedicated talkback mic inputStereo Main L/R outputs (XLR)Ample monitor outputs (eight total) with 6 mono auxiliary mixes (XLR) and 2 stereo auxiliary mixes.The 2 stereo aux outputs can drive wired in-ear monitors (IEM) directly.Mono auxiliaries may be linked for stereo use.Superb sound qualityClass-A microphone pre-amps32-bit floating point processing24-bit AD & DA convertorsInput channels are fully-featured:Four-band full parametric EQVariable high-cut and low-cut filtersGateCompressor (with de-esser)Main and auxiliary outputs feature:1/3-octave graphic EQ (four-band parametric EQ on stereo auxiliaries)LimiterDelayNotch filtersFour professional quality stereo DSP effects. Choose from:Two types of reverbMono delayStereo delayChorusPitch-changeA pitch correct processor is assignable to any input channel.Eight DCA and eight mute groups.Color, capacitive touch screen graphical user interface combined with hardware controls for fast and intuitive operation.Great results and easy to useInput channel preset library features over 100 presets developed by experienced concert engineers specifically for live sound applications.Wizards assist with input gain adjustment and effects selection and routing.On board Info system gives you instant access to the user manual.Save your own channel presets and complete mixer scenes to internal memory or USB device.Capturing live performance to multi-track has never been easier. Record 22 tracks (all inputs plus a stereo mix) directly to USB hard-drive. Mix down on TouchMix or import into your favorite DAW.Complete mixer remote control via free iPad® App. Monitor control via iPhone/iPod Touch App. Multiple Wi-Fi Connectivity optionsSecurity Lockout ModesUSB Wi-Fi interface and carrying case are included.

The AcousticDesign Series of installation loudspeaker products from QSC Audio expands with the new AD-S32T surface mount loudspeaker system. Designed for background and general purpose audio playback, the new AD-S32T is attractive, compact and acoustically matched to the entire AD Series. Rated for 30 Watts continuous power handling and able to handle 120 Watt peaks, the AD-S32T is a fully featured loudspeaker system in a very small package.Specifications:3" polypropylene cone woofer0.75" titanium dome tweeter30 Watts continuous power handling, 120 watts peak70/100 volt multitap transformer with 8 ohm bypassIncludes ball mount assembly and yoke mountAvailable in black or white

The QSC AcousticDesign  AD-S10T surface mount loudspeaker.Specifications:250w RMSTransformer taps 70/100v : 100V: 100, 50, 25 watts and 8 ohm bypassDMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage areaPatent pending X-Mount enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over timeOptional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment optionsEuroblock connectors allows pre-wiring of the systemLow saturation 70/100V transformers with 8 ohm bypass (S8T and S10T only)Lightweight ABS enclosures offer long-term durability and lasting good looksSealed input panel cover and powder coated aluminum grilles for added weather resistanceMeets IEC60529 IP-54 for dust and splash resistanceAvailable in black or white

The QSC AcousticDesign  AD-S12T surface mount loudspeaker.Specifications: DMT (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area Patent pending X-Mount enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options Euroblock connectors allows pre-wiring of the system Lightweight ABS enclosures offer long-term durability and lasting good looks Sealed input panel cover and powder coated aluminum grilles for added weather resistance Meets IEC60529 IP-54 for dust and splash resistance Available in black (RAL 9011) or white (RAL 9010) Complete EASE, CAD & BIM information available online

QSC AD-S28Tw Surface Mount Subwoofer 250W, Dual 8 Inch Woofers, 70/100 V Multitap Transformer.Specifications:Dual 8" polypropylene cone woofers.Large port area for extended low-frequency performance.Dual chamber ported bandpass cabinet.Defeatable passive 120 Hz low-pass filter with impedance compensation.250 watts continuous power handling, 700 watts peak.

When we first experienced QSC's super-powerful and amazingly portable active K-series PA speakers, we were blown away, to say the least. Now, here's your chance to change the way you look at live sound; plug into the 1,000-watt KW152 and prepare to be amazed! QSC managed to pack a 2 x 500-watt, Class D power plant into this premium birch enclosure, and very effective onboard DSP lets you get the absolute maximum out of this 15" speaker. You'll love the connection and control options on the KW152's back panel. You'll also love the fact that this loudspeaker is built for the long haul. Plug into the KW152 and you'll be a believer!If it's power you're after, then this is your loudspeaker. QSC built the KW152 to give you big, clean, room-filling performance, to the tune of 1,000 watts. And, thanks to the Class D design, this speaker won't break your back when it's time to set up or tear down! It also puts an array of connection options conveniently at hand. The back panel gives you mic, line, and even RCA inputs plus gain controls, right where you need them. You can even mix up to three audio sources internally and daisy chain to another KW152, via the balanced output.QSC built DSP right into the KW152, so you get the absolute most out of this speaker's formidable wattage. Intrinsic Correction adjusts time, frequency, and amplitude response to give you amazing performance across all frequencies. Guardrail protection keeps the amplifier safe from overloads and minimizes clipping. Hit the DEEP switch and hear just how big this speaker can sound. This isn't just a series of filters and limiters thrown in to enhance the sound; this DSP makes an already outstanding speaker incredibly efficient and perfect for any room.You know that a well-made loudspeaker is only as good as the ruggedness of its enclosure. After all, if it can't take the rigors of the road, then what good is it? That's why QSC made the KW152 extremely tough. You get premium-grade Baltic birch cabinet construction, a tough steel grille, cast-aluminum side handles, and even integrated M10 suspension points for flown installation. If you use speaker stands, then you'll definitely appreciate the Tilt-Direct pole-mounting system. This setup actually lets you dial in a downward tilt, so the speakers point at the audience and not at the back wall. Specifications:K-series performance in a lightweight, birch design 1,000-watt, Class D power module (2 x 500W) Extensive DSP (featuring DEEP and Intrinsic Correction) enhances system performance DMT (Directivity Matched Transition) ensures uniform coverage across the entire sound field Rugged, texture-painted birch enclosures 4-position mic/line gain (full-range models) Tour-grade 16-gauge steel grilles Comfortable ergonomic handles 35mm pole sockets with Tilt-Direct M10 rigging points for suspended installation (full-range models)

When we first experienced QSC's super-powerful and amazingly portable active K-series PA speakers, we were blown away, to say the least. Now, here's your chance to change the way you look at live sound; plug into the 1,000-watt KW153 and prepare to be amazed! QSC packed a 2 x 500-watt, Class D power plant into this speaker's premium birch enclosure, and very effective onboard DSP lets you get the absolute maximum out of its low-, mid-, and high-frequency drivers. You'll love the connection and control options on the KW153's back panel. You'll also love the fact that this loudspeaker is built for the long haul. Plug into the KW153 and you'll be a believer!If it's power you're after, then this is your loudspeaker. QSC built the KW153 to give you big, clean, room-filling performance, to the tune of 1,000 watts. And, thanks to the Class D design, this speaker won't break your back when it's time to set up or tear down! One amp puts 500 watts through the low-frequency 15" driver, while the 6.5" mid driver and the 1/75" HF driver share power from the other 500-watt amp. The result? Big, clean sound across all frequencies! The KW153 also puts an array of connection options conveniently at hand. The back panel gives you mic, line, and even RCA inputs plus gain controls, right where you need them. You can even mix up to three audio sources internally and daisy chain to another speaker, via the balanced output.QSC built DSP right into the KW153, so you get the absolute most out of this speaker's formidable wattage. Intrinsic Correction adjusts time, frequency, and amplitude response to give you amazing performance across all frequencies. Guardrail protection keeps the amplifier safe from overloads and minimizes clipping. Hit the DEEP switch and hear just how big this speaker can sound. This isn't just a series of filters and limiters thrown in to enhance the sound; this DSP makes an already outstanding speaker incredibly efficient and perfect for any room.You know that a well-made loudspeaker is only as good as the ruggedness of its enclosure. After all, if it can't take the rigors of the road, then what good is it? That's why QSC made the KW153 extremely tough. You get premium-grade Baltic birch cabinet construction, a tough steel grille, cast-aluminum side handles, and even integrated M10 suspension points for flown installation. Specifications:15” woofer; 6.5” midrange woofer; 1.75” diaphragm compression driver75° Nominal coverage angleMaximum SPL 134 dB peak1000 watt Class D power modules in all models (2 x 500 W continuous)Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced outputExtensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performanceDMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound fieldRugged, texture-painted birch enclosuresFour-position Mic/Line gainTour-grade 16 gauge steel grillesComfortable ergonomic handles35 mm standard (non-tilt) pole socketM10 rigging points for suspended installation

QSC's incredible KLA12 line array speaker combines astounding power, amazing flexibility, and road-ready dependability in a surprisingly lightweight package that sounds absolutely stunning. The KLA12 is powered by a 500W x 500W module that provides plenty of clean, clear power to the 12" LF driver and the 1.75" HF compression driver. Ar-Q frequency optimization lets you tune the KLA12 to the array; in fact, you can adjust for the number of speakers in your array and get the most out of your KLA12 (it allows for up to five enclosures). You'll also appreciate the SOLO rigging system, which allows you to set up the speaker without tools or hardware. If you choose pole mount the speaker, the onboard Tilt-Direct mount lets you position the KLA12 perfectly for any room. Specifications:500 W x 500 W power moduleRugged, ABS enclosure delivers light-weight durabilitySOLO Rigging System supports deployment without tools or external hardwareAr-Q Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 x KLA12 and 2 x KLA18190° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)High power, 12” low frequency driver provides extension down to 44Hz without subwoofersExtensive DSP further enhances and protects performance1.75” diaphragm compression driver delivers clear and powerful high-frequency reproductionpowerCON Input and Thru connectionsTilt-Direct pole mount assists directivity in single-unit applications

The QSC AcousticDesign AD-S8T surface mount loudspeaker.Specifications:200w RMSTransformer taps 70/100v : 100V: 60, 30, 15 watts and 8 ohm bypassDMT (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage areaPatent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over timeOptional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment optionsEuroblock connectors allows pre-wiring of the systemLow saturation 70/100V transformers with 8 ohm bypass (S8T and S10T only)Lightweight ABS enclosures offer long-term durability and lasting good looksSealed input panel cover and powder coated aluminum grilles for added weather resistanceMeets IEC60529 IP-54 for dust and splash resistanceAvailable in black or white

The QSC MP-M music and paging mixers are fixed architecture mixer/processors offering unprecedented capabilities combined with ease of configuration and operation. The products are intended for retail and hospitality applications in which high-quality audio from various sources is routed to multiple zones. Live mixing functions are also supported for applications requiring reinforcement of entertainment, presentations or conferences. Easy configuration and design: MP Install app gives you an attractive graphic user environment with an intuitive workflow and controls that make it simple to manage all the inputs and outputs. Workflow Wizard: Helps the installer keep track of tasks and easily navigate the mixer. QSC loudspeaker voicings: Apply Intrinsic Correction™ (factory FIR/IIR presets) to QSC loudspeakers to maximize the performance and value of the system. Customized control level: Fine tune controls to allow as much or as little as the installation requires on the available MP-M Series control peripherals. Wired/wireless control options: Use optional MP-MFC wall-mounted controllers with graphic display to control zone source selection, zone output levels, input level selection and scene recall. MP Manage app expands these control options with wireless, more granular controls. In both cases, facility staff may be restricted to only those controls that they are authorized to use. Complimentary aesthetics: MP-M Series mixers match the appearance aesthetic of the QSC MP-A Series music and paging amplifiers for an installation that looks as good as it sounds.

The QSC MP-M music and paging mixers are fixed architecture mixer/processors offering unprecedented capabilities combined with ease of configuration and operation. The products are intended for retail and hospitality applications in which high-quality audio from various sources is routed to multiple zones. Live mixing functions are also supported for applications requiring reinforcement of entertainment, presentations or conferences. Easy configuration and design: MP Install app gives you an attractive graphic user environment with an intuitive workflow and controls that make it simple to manage all the inputs and outputs. Workflow Wizard: Helps the installer keep track of tasks and easily navigate the mixer. QSC loudspeaker voicings: Apply Intrinsic Correction™ (factory FIR/IIR presets) to QSC loudspeakers to maximize the performance and value of the system. Customized control level: Fine tune controls to allow as much or as little as the installation requires on the available MP-M Series control peripherals. Wired/wireless control options: Use optional MP-MFC wall-mounted controllers with graphic display to control zone source selection, zone output levels, input level selection and scene recall. MP Manage app expands these control options with wireless, more granular controls. In both cases, facility staff may be restricted to only those controls that they are authorized to use. Complimentary aesthetics: MP-M Series mixers match the appearance aesthetic of the QSC MP-A Series music and paging amplifiers for an installation that looks as good as it sounds.