Shure

The Beta 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.          FEATURESThe Beta 98 H/C and WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.The Beta98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmittersTailored frequency response for open, natural sound reproductionCompact, lightweight construction provides a low degree of visibilityGooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioningLegendary Shure ruggedness and reliability

Shure A15HP Passive High Pass Filter (100Hz/12dB) Plug Adaptor, XLR in/out.

The Shure A15TG Tone Generator is a battery-powered 700 Hz signal source used to troubleshoot audio systems by checking microphone lines for correct patching and detecting unusual noise that is present. The output level of the A15TG is approximately -42 dBV. This allows it to be used with either microphone level or line level inputs and the barrel design allows it to be connected to a microphone cable or directly to a mixer input. The A15TG can tolerate the presence of phantom power or a short circuit in the line that it is driving. Additional features of the A15TG include a recessed On-Off switch, a Male XLR output connector, and a removable end cap allowing for easy battery installation and removal. Battery life is 1,000 hours of continuous use.

The Shure A96F transformer connects microphones with an XLR-type connector to the 3.5 mm inputs found on camcorders and other recording devices. It increases the signal level from the microphone, provides a balanced input, and prevents distortion due to the DC bias voltage typically found in camcorder microphone inputs. The A96F can be modified for microphones rated at 150 ohms. This modification is only necessary if the output level from the A96F is insufficient for your recording device. It features a female XLR connector on the microphone end and .6 meter (2 ft) cable with 3.5 mm phono plug on the recorder end.

Pouch for Shure Microphones .

Vinyl zipper bag for Shure handheld transmitter.

 The Shure A85F is a low- to high-impedance microphone-matching transformer that provides 24 dB of signal increase gain. It has balanced female XLR and unbalanced high impedance male 1/4'' phone plug connectors, and may be used in reverse. The A85F is typically used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder. NOTE: Not for connection to the balanced line-level output of a mixer.

A carrying case for a Shure PGX system.Components not included.

Foam windscreen for Shure's SM94, 849, BG4.1, KSM109/SL, and PG81 microphones.

The Shure A32WS Windscreen is designed with acoustically transparent foam to reduce unwanted breath and wind noise without affecting the sound quality. It is particularly effective in reducing pops and ticks caused by talking or singing closely into the microphone as well as reducing wind noise when using the microphones in outdoor applications. For use with Shure KSM27, KSM32 and KSM44 microphones.

Beta 57 Locking Gray Foam Windscreen

Shure 95B2207C PG58 Replacement Grille

Conference One metal Flight caseIt can hold 1 main unit-1 chairman console + 4 delegates consoles & cables.

Shure made the KSM353 ribbon microphone to give you the smooth ribbon performance you love, but added a bonus: a ribbon element that can stand up to high SPLs. Hand-assembled in the USA, the KSM353 is capable of working over a wide frequency range, without losing the natural characteristics that make ribbon mics desirable. You'll appreciate the tough, proprietary Roswellite ribbon material Shure uses in this mic; it can handle up to 146dB, so you know it's tough enough to put on everything from vocals to instruments. Built to sound great and to last, the KSM353 makes an instant essential for your mic locker! Features:Roswellite ribbon elementIf the fear of damaging a ribbon mic's fragile ribbon element has made you hesitant about adding one to your locker, worry no more. Shure's KSM353 uses a stronger element made of Roswellite material, which has better "shape memory" than conventional materials. This means the KSM353 can withstand high SPLs without ill effects — and still give you the smooth ribbon-mic character you're looking for.Premium constructionIn addition to its Roswellite ribbon element, the KSM353 comes packed with premium components. Inside, for example, you'll find a double-shielded transformer, which gives you robust output while minimizing RF and magnetic interference. This is a must for modern recording situations. A custom ribbon motor assembly tailors bass response without attenuating the overall output, so you get full lows and mids. You also get great upper-range presence from this mic. This hand-assembled mic includes high-quality machined steel, silver, gold, and aluminum materials throughout, and you can expect it to remain a mainstay in your studio for years to come. You get classic, smooth performance, even on loud sourcesYou'll definitely be able to put this mic's figure-8 pickup pattern to work in your studio setup. The KSM353 delivers completely symmetrical audio on axis, while its off-axis rejection is stellar. Like other great ribbon mics, the KSM353 provides smooth character, but it also gives you plenty of articulation and detail. Unlike other great ribbon mics, however, this one can handle serious SPLs.  

Shure A400SM Shock Mount for Gooseneck Microphones

The Shure A202BB Desk Stand is designed to permit using the Shure Model MX202 Overhead Microphone on a flat horizontal surface.

Shure A400SMXLR Wired Microphone Accessory The A400SMXLR is an accessory that allows permanent installation of a quick-release shock mount for use with a wide variety of gooseneck.

Securely attaches a Shure Beta98 to a brass instruments and saxophones 

Drum Mount Kit for SM98

Allows attachment and positioning of Beta 98 and Beta 98A to the side of a drum.

Pin mount for Shure WL50 microphone.

Dual microphone mount for Shure 545 Series, SM57 and Beta 57A.

Shock Stopper isolation mount/swivel adapter, reduces transmission of mechanical noise and vibration by more than 20 decibels. Compatible with Shure models 849, SM81, SM94, VP64, KSM137, KSM141, or any 3/4 inch (1.875 cm) microphone.

Quick-release microphone mounting accessory for versatile and secure placement and removal.

Isolation Mount for Shure VP88 MicThe Shure Model A88SM Microphone Isolation Mount is designed especially for use where exceptional freedom from mechanically transmitted noise is a necessity. Through its use of Shure's highly effective Shock-Stopper half-mount isolators and secure cable locking design, the A88SM eliminates most noise associated with stands, booms, and cable movement. Designed expressly for Shure's VP88 MS Stereo Condenser Microphone, the A88SM can also be used with any microphone with a handle diameter of approximately 27 mm (1-1/16").The A88SM offers several features that make it a versatile accessory for studio and location miking. As supplied, the mount contains a locking "foot"-type slide-in mount for instant attachment to most ENG cameras with a mounting "shoe." A simple twist knob - which also provides positive-locking vertical angle adjustment - permits removal of the foot and attachment of a swivel with both 5/8"-27 and 3/8"-16 tapped threads for attachment to most microphone stands and booms.

Shock mount for SM89 shotgun microphone, or any microphone with a 3/4-inch diameter handle. Reduces mechanical noise transmission by more than 20 decibels.

Reduces unwanted breath and wind noise. For use with Shure Microflex Gooseneck Microphones. Available in black.

Foam windscreen for SM85, SM86, SM87A, Beta

The Shure A58WS Windscreen is designed with acoustically transparent foam to reduce unwanted breath and wind noise without affecting the sound quality. It is particularly effective in reducing pops and ticks caused by talking or singing closely into the microphone as well as reducing wind noise when using the microphones in outdoor applications. For use with all larger Shure "ball-type" microphones including the SM58, Beta58A, SM48, and the 565SD microphones.

 The KSM313 is best suited to amplified instruments or for intimate vocal applications.Bi-directional polar pattern delivers premier audio with superior off-axis rejection True Dual-Voice tuned specifically for user’s for choice of response - warm and full for amplifiers, or swivel for bright and flattering vocalsRevolutionary Roswellite™ proprietary ribbon material replaces traditional foil ribbons with high tensile strength, toughness and shape memory that provides superior resilience at extreme SPLsCustom-sourced components for superior presence, minimized signal loss and maximized output.146dB SPL across 30 – 15,000 Hz frequency response ideal for capturing fast transients in vocals, acoustic instruments and concert hallsLegendary Shure quality and superior construction from hand-assembly of machined steel, silver, gold and aluminum materialsMonocle stand mount custom swivel mount for fully versatile placement and orientationProtective wood case included for storage when not in use  TECHNICAL SPECIFICATIONS:Transducer Type : RibbonPolar Pattern: BidirectionalFrequency Response: 30 Hz - 15 kHzSensitivity (1 kHz): -54,5 dBV/Pa / 1,88 mV/PaSound Pressure: 146 dBWeight: 400 g 

The FP1 Bodypack Transmitter features a lightweight and durable design for use with TA4F-connection microphones including lavaliers and headsets.Ideal for use with FP Wireless and SLX Wireless.FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. Features :Automatic transmitter setup that instantly syncs the transmitter to the receiver frequencyLED indicator for control lockout, IR RF sync, and low batteryAudio input gain for adjustment of audio level4-Pin microphone input jack for use with lavaliers or headset microphones with TA4F connectors108 mm x 64 mm x 19 mm (H x W x D)81 g (3 oz.), without batteriesMolded polycarbonate case2 AA batteries, 1.5 VUp to 12 hours (alkaline) 

The Shure Beta 181 is an ultra-compact, small-diaphragm side-address condenser microphone, designed for discreet placement and control in live and studio environments. Featuring interchangeable cardioid, supercardioid, omnidirectional and bidirectional capsule options for superior versatility, the small diaphragm design provides superior audio with consistent, textbook polar responses in a form factor small enough to get close to the source in the tightest conditions..Application recommendations: BETA 181/O (omnidirectional) for ambient/room, instrument ensemble applicationsSpecifications BETA 181/O (omnidirectional) for ambient/room, instrument ensemble applicationsInterchangeable polar pattern capsules attach to a compact preamplifier with integrated XLR connections for the ultimate in low-profile application flexibility (Each Beta 181 ships with one polar pattern capsule and one XLR preamplifier. Capsules available separately for custom flexibility.)Precision-engineered, compact side-address design features innovative locking ring to provide secure connection between capsule and preamplifierFrequency response tailored for wide dynamic range applications for use in high SPL environmentsFurnished with stand adapter, windscreen and carrying case (carrying case will securely protect up to four polar pattern capsules)

Shure Beta 98 A/C Miniature Condenser Microphone - suitable for drums, percussion, piano, brass and strings, cardioid polar pattern, warm natural sound with nice high tone, frequency response: 20Hz-20kHz, 11-52V phantom power, 4-pole TQG connection. Includes elastic holder (RK 282) with 3/8" thread, windscreen, bag, 7.6m cable (TA3F to TA4F) and RPM626 phantom adapter. Optional clip available for brass instruments (A98KCS).

Shure Beta 98 Amp/C Miniature Condenser Microphone - designed especially for drums and percussion, cardioid, warm natural sound with nice highs, 20Hz-20kHz, 11-52V phantom power, internal phantom adapter. Includes A57M clip, bag and windscreen.

Shure Beta 98 AD/C Miniature Condenser Microphone - includes special clip for snare and toms, cardioid, warm natural  sound with nice high tone, 20Hz-20kHz, requires 11-52V phantom power, 4-pole TQG connection. Includes A98D drum clip, windscreen, bag, 4.5m cable (TA3F to TA4F) and RPM626 phantom adapter, optional clips available for other applications.

The Shure Beta 27 is a large diaphragm condenser microphone. Developed for discerning live sound professionals, the Beta 27 accurately targets sources like acoustic, wind and electric instruments for concise, accurate sound with a minimum of bleed.The Shure Beta 27’s super-cardioid polar pattern and smooth flat frequency response is designed to provide excellent off-axis rejection for natural sound reproduction and optimal control in professional live sound reinforcement applications. The tight polar pattern also ensures high gain-before-feedback and maximum isolation from other sound sources. The Beta 27 features a -15dB switchable attenuator that handles extremely high SPLs with ease and makes the Beta 27 the optimal choice for electric instruments, such as guitar and bass amplifiers, drum and percussion overheads, piano and horn applications.The Shure Beta 27 Features:Superior transient response from a low-mass, externally-biased, ultra-thin 24 karat gold-layered Mylar diaphragmReduction of unwanted low frequency noise and proximity effect for consistent, extended low-end through a 3-position switchable low-frequency filterReduction of wind and breath noise by an internal pop filter with three separate mesh layersPremium electronic components and gold-plated internal and external connectors

Shure PG81-XLR  is a condensor microphone with cardioid polar pattern, suitable for overheads and instruments. Can be powered via  phantom power or via optional battery, includes 5mtrs XLR cable. Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.Powered by AA battery or phantom power supply.Internal shock mount for reduced handling noise.Durable metal construction.On/off switch for onstage control. 

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.One cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image separation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production.Specifications : Time-coherent, Mid-Side (M-S) design for optimal stereo imagingBuilt-in stereo matrix for direct control of the stereo spread; direct M-S outputs availableMono compatibility ideal for broadcast applicationsLow noise and distortionWide dynamic rangeSwitch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise & stand vibrationOperates on phantom power or a 6V camera batteryLED power indicatorInternal shock mount for reduced stand vibration and handling noiseBuilt-in "pop" screenIncludes windscreen, swivel adapter, and Y-cable

Shure 55 SH Series II, Dynamic Vocal-Microphon,"Elvismic", fitted with Switch, cardioid polar pattern, stand adapter built into the housing.

Shure EP2T Wireless TransMixerWireless TransMixer for PSM 200 Wireless Personal Monitor System, Euro VersionThe EP2T TransMixer is a breakthrough design for in-ear monitoring. It allows the user to connect two line-level or mic–level inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs, use line outputs from a mixing console, or connect it to Shure’s Aux-Pander[TM].Shure EP2T Wireless TransMixer Features:•2 mic/line XLR/1/4-inch combo inputs•XLR SPLIT OUT connectors•Input level controls•Tri-color LED input level indicators Shure EP2T Wireless TransMixer Specifications:Modulation Limiter : Internal peak limiter (>10:1 hard knee compression)Antenna : 1/4 Wavelength, semi-rigid, PCB MountCurrent : 170 mA maximumAudio Input - Connector Type : XLR/1/4-inch comboAudio Input - Configuration : electronically balancedAudio Input - Actual Impedance : 1 kohmsAudio Input - Nominal Input Level : –25 dBu @ 1/2 volume (12 o’clock)Audio Input - Maximum Input Level : –5 dBu @ 1/2 volume (12 o’clock)Audio Input - Pin Assignments : XLR: 2=hot; 3=cold, 1=ground 1/4: Tip = hot, Ring = cold, Sleeve=groundAudio Input - Phantom Power Protection : Yes, Up to 52 VdcAudio Output - Connector Type : XLRAudio Output - Configuration : electronically balancedAudio Output - Pin Assignments : 2 = hot ; 3 = cold, 1 = groundAudio Output - Phantom Power Protection : Yes, Up to 52 VdcOperating Voltage : 12-18 VDCDimensions : 8.6 x 5.6 x 1.7 inch 220 x 140 x 40 mmNet Weight : 13 oz 370 g

Detachable cable, 64"(1.60m). Works with SE215, SE315, SE425 & SE535.Clear or black colour.Email/call us for your choise

 Camera shoe mount for FP5 Portable Receiver. 

Belt clip and protective skin for UR3 Plug-on Wireless Microphone Transmitter. 

Shure SE215 Sound Isolation Earphones - Featuring a newly developed Dynamic MicroDriver and a detachable cable. The Shure SE215 offers detailed sound with enhanced bass, and its design blocks out up to 90% of outside sound with unmatched comfort.The SE215 Earphones are ideal for performing on stage with an in ear monitoring system and also serve as the perfect upgrade for MP3 players.The Shure SE215 Main Features:Single Dynamic MicroDriverKevlar-reinforced Detachable CableDetailed sound with enhanced bassBlocks out up to 90% of outside soundIdeal for performing on stage with an in ear monitoring systemPerfect for MP3 players