SME

The Model 6 is a class leading integrated turntable delivering a unique sonic performance. Audio engineering excellence is achieved with technologically advanced new materials whilst maintaining the definitive craftsmanship that SME is famous for.Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables. A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range.The Model 6 is equipped with an improved version of the highly acclaimed SME M2-9 tonearm which is internally dampened with a unique single element balance system catering for cartridges weighing 5 to 12 grams and suitably designed for both MM and MC cartridges. The headshell is magnesium alloy for lightness and its ingenious design provides rigidity and allows azimuth correction.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.

Synergy is a precision engineered integrated turntable with built-in phono stage, factory matched
moving coil cartridge and premium grade audio cables from world class partners, delivering the
ultimate vinyl replay experience without compromise. The MK2 Synergy is equipped with a new highly advanced drive system providing improved speed control, accuracy and stability. Synergy is a precision-made turntable equipped with the highly acclaimed SME Series IV tonearm, Ortofon’s ‘exclusive series’ MC Windfeld Ti cartridge, a custom designed phono stage by NAGRA and mono crystal silver wire by Crystal Cable. The collective sum of these components is award winning and class leading. Integrated and factory configured requiring minimal user set-up. Design is compact, sleek, modern and pure SME with precision engineered components, high attention to detail and crafted from the finest materials to the strictest tolerances. All of which contribute to an extraordinary vinyl listening experience.The MK2 Synergy is a precision turntable of high mass made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet. The sub-chassis is suspended on an advanced isolation system for primary resonance control and houses the main bearing, platter and tonearm. Four fully adjustable feet are mechanically de-coupled from the main chassis by isolators providing base resonance control. The main spindle is 19mm precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotation. The platter is machined from aluminium alloy and weighs over 4.6kg. Extensionally dampened with the top surface iso-damp, diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present. Synergy motor conforms to the highest standards of silent running and the turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability.Speed ControlThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet aluminium. A separate mains Power Unit keeps the transformer away from the SCU and importantly separated from the turntable audio signal cables.TonearmThe MK2 Synergy comes equipped with the SME Series IV magnesium tonearm, a precision instrument of extreme quality. Internal audio wiring is premium grade from Crystal Cable.Crystal Cable WiringSynergy is equipped with a premium grade signal cable from Crystal Cable. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.

The MK2 Model 30 is a unique precision turntable of uncompromising quality and engineering excellence.
Once independently judged as ‘the best turntable of all time.
Construction is heavy mass; dampening is extensional and non-vibration from moving parts ensures excellent
dynamics and pitch stability. A new sophisticated drive system provides a significant advancement in speed control
and accuracy, transforming the new generation Model 30 into a new league.The Model 30 is the former SME flagship turntable delivering an outstanding performance and for many years considered to be the world’s reference standard turntable. This accolade is achieved from an ingenious design, precision engineering, intelligent damping and fundamental physics. The net result of the immense care taken in the design and execution of these components is the Model 30, audio engineering excellence evolved over six decades.The Model 30 is effortless in controlling and managing vibration, resonance, mechanical energy and electrical fields. Weighing over 42kg it is significant in relation to its size and density. The main and sub-chassis’ resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The outstanding performance Model 30 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring.CONSTRUCTIONThe MK2 Model 30 is a precision turntable made to exacting engineering standards for extreme performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis is stiffened with a lateral brace for improved chassis flex and vibration control. The suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. In addition, the sub-chassis motion is finely disciplined by fluid dampers within the four suspension columns. All four feet are fully adjustable and mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 30 sub-chassis is suspended on 60 purpose made suspension rings meeting all the requirements of high-density construction, enabling an outstanding and dynamic performance.DUMPINGFour suspension column fluid-dampers disciplines sub-chassis movement and eliminates overshoot to give almost zero Q recovery. The isolation needed to prevent acoustic feedback is bridged by the resistive coupling of the damping fluid through which unwanted reacted energy is conducted away to ‘ground’. This function is adjustable through trimmers which can be used in conjunction with a gauge to give recommended settings or varied to suit individual conditions. This extreme level of control is instrumental in the design and performance of the Model 30.[v/c_column_text]PLATTERThe platter is machined from aluminium alloy and weighs 7.5kg and 330mm in diameter. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 30 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 30 is a unique precision turntable of uncompromising quality and engineering excellence.
Once independently judged as ‘the best turntable of all time.
Construction is heavy mass; dampening is extensional and non-vibration from moving parts ensures excellent
dynamics and pitch stability. A new sophisticated drive system provides a significant advancement in speed control
and accuracy, transforming the new generation Model 30 into a new league.The Model 30 is the former SME flagship turntable delivering an outstanding performance and for many years considered to be the world’s reference standard turntable. This accolade is achieved from an ingenious design, precision engineering, intelligent damping and fundamental physics. The net result of the immense care taken in the design and execution of these components is the Model 30, audio engineering excellence evolved over six decades.The Model 30 is effortless in controlling and managing vibration, resonance, mechanical energy and electrical fields. Weighing over 42kg it is significant in relation to its size and density. The main and sub-chassis’ resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The outstanding performance Model 30 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring.CONSTRUCTIONThe MK2 Model 30 is a precision turntable made to exacting engineering standards for extreme performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis is stiffened with a lateral brace for improved chassis flex and vibration control. The suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. In addition, the sub-chassis motion is finely disciplined by fluid dampers within the four suspension columns. All four feet are fully adjustable and mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 30 sub-chassis is suspended on 60 purpose made suspension rings meeting all the requirements of high-density construction, enabling an outstanding and dynamic performance.DUMPINGFour suspension column fluid-dampers disciplines sub-chassis movement and eliminates overshoot to give almost zero Q recovery. The isolation needed to prevent acoustic feedback is bridged by the resistive coupling of the damping fluid through which unwanted reacted energy is conducted away to ‘ground’. This function is adjustable through trimmers which can be used in conjunction with a gauge to give recommended settings or varied to suit individual conditions. This extreme level of control is instrumental in the design and performance of the Model 30.[v/c_column_text]PLATTERThe platter is machined from aluminium alloy and weighs 7.5kg and 330mm in diameter. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 30 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 20 is a finely engineered precision turntable. High density construction, extensional damping of major
surfaces and lack of vibration from moving parts ensures exceptional detail, resolution and uncoloured performance.
Equipped with a new highly advanced drive system provides a significant improvement to speed control, accuracy and
stability, making the new generation Model 20 far superior to the highly acclaimed original.The Model 20 has superb instrument quality machining allied with fundamental physics, the higher the mass and stiffness of the body the less it will flex and vibrate; the duration of a vibration is shortened by advanced damping treatment. The Model 20 effortlessly addresses the problems of extraneous vibrations which emanate from numerous sources including air and structural vibration from loudspeakers, groove modulation, stray electrical fields and mechanical energy from moving parts. Weighing 26kg is significant in relation to its size as density matters. The main and sub-chassis plate thicknesses are 16mm and resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. The definitive performance Model 20 is available with or without a tonearm. The tonearm option is the flagship SME Series V with contrasting Silver Printed Detail and Crystal Cable internal wiring.CONSTRUCTIONThe MK2 Model 20 is a precision turntable made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet and acoustically treated. The sub-chassis suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. Four fully adjustable feet are mechanically de-coupled from the main chassis by way of isolators.The main spindle is 19mm in diameter, precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotational control.SUSPENSIONWith no sonic footprint, the Model 20 sub-chassis is suspended on 40 purpose made suspension rings meeting all the requirements of high density construction, enabling a detailed resolution and uncoloured performance.DUMPINGA large central fluid-damper disciplines sub-chassis movement with a pleasing sense of security when handling records on the platter, offering a resistive ground-path for acoustic signals. In addition to a cartridge’s electrical output, mirror image acoustic signals reacted in the tonearm and record, will pass into the sub-chassis in the course of dissipation. However, the usual closed loop design does not address the problem of their differing phase, so in the Model 20 the structural interfaces concerned have received special attention to provide paths of the required impedance. This control of vibration is fundamental to the design of the Model 20 and goes a long way to explaining the stunning tonal and dynamic neutrality that it exhibits.PLATTERThe platter is machined from aluminium alloy and weighs 6.5kg. Extensionally dampened and the top surface iso-damp mat is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 20 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin with machined aluminium fascia, chassis base and rear panel.POWER UNITAn independent mains Power Unit keeps the transformer separated from the Speed Control Unit and importantly away from the audio signal cables.

The MK2 Model 15 takes its inspiration from the Model 20 with its high-density construction but with a compact footprint. In seeking to emulate the engineering excellence of its bigger brother, the Model 15 is a precision turntable
delivering a dynamic audio performance. The new highly advanced drive system provides significantly improved speed
control, accuracy and stability, the Model 15 just got better.Designed with simplicity of operation that has come to be expected from all SME turntables, the Model 15 is engineered and precision made from the finest materials and to the strictest tolerances contributing to an outstanding musical performance. It’s clever styling makes it a credible addition to any sound system which will astound and amaze listeners for many years.The high-performance Model 15 is available with three SME tonearm options of Series 309, Series IV, Series V, or without a tonearm (turntable only). All tonearm options come complete with internal Crystal Cable wiring as standard.CONSTRUCTIONThe MK2 Model 15 is a precision turntable made to exacting engineering standards for high performance. The chassis and sub-chassis are CNC machined from premium grade aluminium billet. The sub-chassis suspended suspension system provides definitive resonance control and houses the main bearing, platter and tonearm. Three fully adjustable feet are mechanically de-coupled from the main chassis by isolators providing base resonance control.The main spindle is 19mm (3/4″) precision machined from high chrome tool steel, ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed for precise bearing and platter rotation.SUSPENSIONThe Model 15 sub-chassis is suspended on 30 purpose made suspension rings and weighs together with the platter more than 11kg (24lb), thus meeting all the requirements of high-density construction required to enable a dynamic sound free from colouration.DUMPINGSub-chassis motion is controlled by a central fluid damper which offers a resistive ground path for acoustic signals, eliminates overshoot and gives almost zero ‘Q’ recovery.PLATTERThe platter is machined from aluminium alloy and weighs over 4.6kg (10lb). The platter is extensionally dampened and the top surface iso-damp is diamond-turned with a fine scroll for acoustic performance. This method of finishing upsets a myriad of tiny fibres which Interface with the underside of the vinyl record. A substantial record clamp operating on the reflex principle ensures the largest possible platter contact even when appreciable record warp is present.MOTORThe Model 15 turntable is driven by a custom made bi-phase AC synchronous motor controlled by a highly advanced speed control unit providing precise speed accuracy and stability. The motor conforms to the highest standards of silent running.SPEED CONTROLThe Speed Control Unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance.The speed range is 33.33 and 45 rpm with independent memory settings via a switched encoder. Fine pitch speed increments/decrements of +/-0.01% of the selected speed are made by a rotary control on the Speed Control Unit fascia. The SCU case is CNC machined from billet polymer resin.POWER UNITA remotely separate mains Power Unit keeps the transformer well away from the Speed Control Unit and importantly away from the audio signal cables.

The Model 60 is the most technically advanced SME turntable ever made, evolved from 75 years of engineering
excellence, innovation and perfection, delivering precise and pure audio reproduction. Extremely high build quality, close tolerance precision engineered componentry, striking design and a range of none painted uniquely engineered finishes.Introduced 60 years after SME entered the elite high end audio world, the Model 60 is far superior than the highly credible Model 30 which has been the reference precision turntable for over 3 decades. The new flagship is an entirely new turntable design with clever engineering and technological advancement. Design features include: de-coupled adjustable feet with multipoint isolation, an intelligent suspended suspension system with horizontal and vertical control, hydraulically dampened main bearing, acoustically treated main chassis, sub-chassis and platter, sophisticated new generation drive system with highly accurate speed control, AC motor and independent power transformer. The Model 60 is equipped with the new Series VA tonearm which is an advanced version of the famous Series V tonearm which has been extensively sonically improved by use of a non-metallic tonearm CNC machined from an advanced polymer resin material with high density and high rigidity properties. The Series VA tonearm tube is acoustically inert with a significantly reduced resonance signature, optimised effective mass and a wide cartridge balance weight rangeTest ResultsTurntable Speed Error at 33.33rpm: 33.33rpm (-0.005%)Time to Audible Stabilisation: 5 – 6 seconds
PeakWow/Flutter (Peak wtd): 0.01% / 0.02%Rumble (silent groove, DIN B wtd): -75dB (-75.4 dB with Clamp)Rumble (through bearing, DIN B wtd): -76.5dBHum & Noise (unwtd, rel to 5cm/sec): -62.5dBPower Consumption: 18w (1w standby)Drive System & Speed RangeThe turntable is driven by a custom made bi-phase AC synchronous motor. The speed control unit uses a dedicated DSP engine to generate two independent pure mathematical sine waves which provide total control of frequency, phase relationship and amplitude. These in turn are matched (tuned) to the motor for accuracy to obtain the best possible performance. The output driver stage is a 2 channel, class AB Bi-polar design with low distortion and relay coupled directly to the motor. The entire design is implemented using high quality surface mount technology on a gold plated FR4 PCB. The speed range is 33.33 and 45rpm with independent memory settings via a switched encoder.

The Model 6 is a class leading integrated turntable delivering a unique sonic performance. Audio engineering excellence is achieved with technologically advanced new materials whilst maintaining the definitive craftsmanship that SME is famous for.Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables. A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range.The Model 6 is equipped with an improved version of the highly acclaimed SME M2-9 tonearm which is internally dampened with a unique single element balance system catering for cartridges weighing 5 to 12 grams and suitably designed for both MM and MC cartridges. The headshell is magnesium alloy for lightness and its ingenious design provides rigidity and allows azimuth correction.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.

The MK2 Model 12 mkII is designed and precision engineered for pure audio reproduction. The all new highly advanced drive system provides much improved speed control, accuracy and stability. This best-selling and very capable precision turntable has evolved to deliver the perfect listening experience.The Model 12A has been designed for those who would prefer to select their own unique combination of phono stage and cartridge for a more personalised listening experience. This introductory model benefits from the finest materials and craftsmanship found throughout the entire SME turntable and tonearm range. Every component part has been precision engineered in-house to the strictest tolerances to contribute to an outstanding musical performance This exciting entry level turntable uses the unique styling of Synergy and comes complete with the highly acclaimed SME 309 tonearm and internal Crystal Cable wiring as standard. The Model 12A is available in three paint finishes of traditional SME Black, Dark Grey and Dark Blue with contrasting detailing.Speed ControlThe electronic control unit uses a high-performance microprocessor, optimised for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Speed ranges are 33.3, 45 & 78 rpm, with fine pitch speed adjustment allowing increments/decrements of +/-0.01% of the selected speed. The electronic control circuitry and power supply unit are housed in an external one-piece CNC machined case. This new design offers complete isolation and support and is the perfect environment for the electronics. Speed selection controls are mounted on the front facia panel with LED indicators.TonearmDesigned to compliment the Model 309 tonearmCrystal Cable WiringThe Model 12A is equipped with a premium grade signal cable from Crystal Cable which is installed inside the tonearm, connected to phono stage and coupled with the cartridge. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.

As a member of the M2 family this tonearm is built by enthusiasts for enthusiasts and among its extensive features include, vertical and horizontal tracking adjustment, tungsten balance weights housed in satin chromed brass sleeves. Double draw-pin detachable headshell with azimuth adjustment and height adjustment by thumb wheel enabling its use with wide range of both cartridges and turntables.BuildS2-R Aluminium shell detachable and interchangeable without disturbing cartridge or wiring. Double draw-in pin bayonet fitting design ensures a rigid junction with the tone-arm. Stainless steel ground horizontal spindle carried in substantial yoke in lOmm diameter precision ball race bearings. Stainless steel ground vertical spindle with integral 16mm diameter flange to couple the spindle with the yoke. The 23mm diameter steel pillar is heat treated, ground, internally honed and carries two 17mm diameter precision ball race bearings widely spaced to resist tilt. Internal wiring is Silver Litz.DampingInternal constrained layer damps minute residual vibrations making the tone-arm acoustically inert.AdjustmentsUnique headshell to tone-arm coupling readily allows cartridge azimuth adjustment. The Anti-Skate control operates through an Anti-Skate weight and filament and is adjustable for up to 5g of cartridge vertical tracking force (VTF). The lowering/raising control gives a smooth positive action and allows for the lifting height of the cartridge above the record to be adjusted. Tungsten-alloy balance weight inserts allow for maximum centre of gravity shift to balance a greater range of cartridges. Up to 38g in S2-R headshell and direct plug-in heads up to 46g. Precise vertical tracking force up to 5g is applied in 0.5 increments via the rider weight and graduated wayrod. Thumbwheel cartridge vertical tracking angle (VTA), height adjustment. Bedplate affords +/- 12.0mm movement to facilitate horizontal tracking angle (HTA) adjustment.

An internally damped precision tonearm of highly polished stainless steel provides sparkling uncoloured reproduction offering pivot-stylus dimensions covering virtually all turntable requirements. The M2 Series tonearm is available in 9, 10 & 12 inch versions and offers at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings and a level of stiffness and rigidity to suit all types of cartridge. These precision made tonearms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance. The headshell is pressure die-cast in magnesium for lightness and rigidity. A collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tighteningBuildThe M2-9 shell is pressure die-cast in magnesium for lightness and rigidity. Series M2-9 is the standard arm having a pivot-stylus dimension of 233.2 mm (9.18”) and will therefore be the one most frequently used. Series M2-10 is identical except that the pivot-stylus dimension is 239.3 mm (9.42”) a difference that suits the layout of some decks. Series M2-12 has a pivot-stylus dimension of 308.8 mm (12.16”). Distortion caused by lateral tracking error is at least 25% less than possible with a nine or inch arm. However effective mass will be typically 12.0 grams. Also, a turntable designed for 12-inch arms must be selected.DampingThe internally damped tonearm of highly polished stainless steel provides sparkling uncoloured reproduction. A unique single element balance system caters for cartridges weighing 5 to 12 grams. After balancing tracking force is applied by forward movement of the weight ensuring the lowest system inertia. The weight moves on a precision screw thread with backlash eliminator allowing exact setting of vertical tracking force.AdjustmentsA collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tightening. 1.0 gram per revolution tungsten weight sub-graduated 0.25 and 0.025 gram moving on a precision screw with backlash eliminator.
220mm (48”) D501 balanced audio lead. Engineered in the best camera quality with satin chrome finish Fluid damped lift/lower control.
Low friction, fully shielded races for both axes.
Sliding base for tracking adjustment.
Thumbwheel height adjustment.
Traditional pattern anti-skate. 

The Model 6 Classic is a class leading integrated turntable delivering unique sonic performance, engineering excellence and definitive SME craftsmanship. Primary features include a CNC machined chassis made from a unique polymer high density resin material providing high mass, small footprint and superb resonance absorption. Main bearing, spindle and drive pulleys are precision made to the same exact standards as all SME high-end turntables.A new generation highly sophisticated electronic speed control unit provides fine pitch speed adjustment within a wide band range. Machined aluminium finishers fitted to the isolation feet complete the look of the Classic.The Model 6 Classic is complimented with the M2-9R tonearm with extensive features including thumbwheel vertical tracking adjustment, tungsten balance weights, double draw-pin detachable headshell with azimuth adjustment. The tungsten alloy balance weight allows for a maximum centre of gravity shift to balance a greater range of cartridges up to 38 grams and with a direct plug-in head up to 46 grams.Design and engineering excellence built by audio enthusiasts for audio enthusiasts.

An internally damped precision tonearm of highly polished stainless steel provides sparkling uncoloured reproduction offering pivot-stylus dimensions covering virtually all turntable requirements. The M2 Series tonearm is available in 9, 10 & 12 inch versions and offers at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings and a level of stiffness and rigidity to suit all types of cartridge. These precision made tonearms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance. The headshell is pressure die-cast in magnesium for lightness and rigidity. A collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tighteningBuildThe M2-9 shell is pressure die-cast in magnesium for lightness and rigidity. Series M2-9 is the standard arm having a pivot-stylus dimension of 233.2 mm (9.18”) and will therefore be the one most frequently used. Series M2-10 is identical except that the pivot-stylus dimension is 239.3 mm (9.42”) a difference that suits the layout of some decks. Series M2-12 has a pivot-stylus dimension of 308.8 mm (12.16”). Distortion caused by lateral tracking error is at least 25% less than possible with a nine or inch arm. However effective mass will be typically 12.0 grams. Also, a turntable designed for 12-inch arms must be selected.DampingThe internally damped tonearm of highly polished stainless steel provides sparkling uncoloured reproduction. A unique single element balance system caters for cartridges weighing 5 to 12 grams. After balancing tracking force is applied by forward movement of the weight ensuring the lowest system inertia. The weight moves on a precision screw thread with backlash eliminator allowing exact setting of vertical tracking force.AdjustmentsA collet of ingenious design affords ‘one-piece’ rigidity and allows azimuth correction to be made before final tightening. 1.0 gram per revolution tungsten weight sub-graduated 0.25 and 0.025 gram moving on a precision screw with backlash eliminator.
220mm (48”) D501 balanced audio lead. Engineered in the best camera quality with satin chrome finish Fluid damped lift/lower control.
Low friction, fully shielded races for both axes.
Sliding base for tracking adjustment.
Thumbwheel height adjustment.
Traditional pattern anti-skate. 

As a member of the M2 family this tonearm is built by enthusiasts for enthusiasts and among its extensive features include, vertical and horizontal tracking adjustment, tungsten balance weights housed in satin chromed brass sleeves. Double draw-pin detachable headshell with azimuth adjustment and height adjustment by thumb wheel enabling its use with wide range of both cartridges and turntables.BuildS2-R Aluminium shell detachable and interchangeable without disturbing cartridge or wiring. Double draw-in pin bayonet fitting design ensures a rigid junction with the tone-arm. Stainless steel ground horizontal spindle carried in substantial yoke in lOmm diameter precision ball race bearings. Stainless steel ground vertical spindle with integral 16mm diameter flange to couple the spindle with the yoke. The 23mm diameter steel pillar is heat treated, ground, internally honed and carries two 17mm diameter precision ball race bearings widely spaced to resist tilt. Internal wiring is Silver Litz.DampingInternal constrained layer damps minute residual vibrations making the tone-arm acoustically inert.AdjustmentsUnique headshell to tone-arm coupling readily allows cartridge azimuth adjustment. The Anti-Skate control operates through an Anti-Skate weight and filament and is adjustable for up to 5g of cartridge vertical tracking force (VTF). The lowering/raising control gives a smooth positive action and allows for the lifting height of the cartridge above the record to be adjusted. Tungsten-alloy balance weight inserts allow for maximum centre of gravity shift to balance a greater range of cartridges. Up to 38g in S2-R headshell and direct plug-in heads up to 46g. Precise vertical tracking force up to 5g is applied in 0.5 increments via the rider weight and graduated wayrod. Thumbwheel cartridge vertical tracking angle (VTA), height adjustment. Bedplate affords +/- 12.0mm movement to facilitate horizontal tracking angle (HTA) adjustment.

The Model 12A has been designed for those who would prefer to select their own unique combination of phono stage and cartridge for a more personalised listening experience. This introductory model benefits from the finest materials and craftsmanship found throughout the entire SME turntable and tonearm range. Every component part has been precision engineered in-house to the strictest tolerances to contribute to an outstanding musical performance This exciting entry level turntable uses the unique styling of Synergy and comes complete with the highly acclaimed SME 309 tonearm and internal Crystal Cable wiring as standard. The Model 12A is available in three paint finishes of traditional SME Black, Dark Grey and Dark Blue with contrasting detailing.Speed ControlThe electronic control unit uses a high-performance microprocessor, optimised for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Speed ranges are 33.3, 45 & 78 rpm, with fine pitch speed adjustment allowing increments/decrements of +/-0.01% of the selected speed. The electronic control circuitry and power supply unit are housed in an external one-piece CNC machined case. This new design offers complete isolation and support and is the perfect environment for the electronics. Speed selection controls are mounted on the front facia panel with LED indicators.TonearmDesigned to compliment the Model 309 tonearmCrystal Cable WiringThe Model 12A is equipped with a premium grade signal cable from Crystal Cable which is installed inside the tonearm, connected to phono stage and coupled with the cartridge. Pure mono-crystal silver conductors in miniature format. Providing precious metal in its most pure version, lifting the musical performance to a higher level.