Teac

Protect and enhance your vinyl collection with "Un-Ryu Washi" paper, only from TEAC.The TA-TS30UN-BW is an inventional turntable sheet to provide an optimized condition for vinyl record playing.Removing dust on vinyl records with a dust sweeper is one of the most ceremonious things when play music, and it is an emotional moment for the greatest experience that about to begin. However, it may sometimes a bothering process to remove dust persistently sticks on the records due to static, which makes you annoy.In order to provide a comfortable moment of listening to muisc, we considered removing static from records is essential to make this ceremony excite, and tried to find the best material for a turntable sheet from the scratch. Traditionally, silicon rubber, felt or cork is used for turntable sheet, because of its attribute of shock-absorbing. However, we considered the most essential things for turntable sheet is to reduce static, and came to a conclusion of using "WASHI" after dozens tests to find an ideal material that matches the condition."WASHI" is a traditional Japanese paper made from the ?bers of Mulberry trees. With natural durability, it’s been widely used for UKIYO-E printings and paper currency for centuries. Recently, it’s been re-discovered and used for stationary and interior fabrics for its beautiful design and excellent functionality. Particularly, "Un-Ryu Shi" is a unique type of WASHI made using special techniques which, showcasing the skill of the craftsman, can be seen in the characteristic ?ber pattern on the paper. By combining this WASHI with Stone-paper for core material, this turntable sheet gains mass and becomes uniformly flat, while restricting vibration, reducing static electricity, and preventing dust from accumulating.The TA-T30UN is the ultimate turntable sheet that provides an ideal condition for record playing at the highest dimension.Features at a glanceAnti-static WASHI paper for easy dust removalUnique watermark pattern of fiber on “Un-Ryu Shi”Moderate-weighted Stone-paper for core materialReversible design to match atmosphere of the room

This 33/45 RMP replacement stylus is compatible with TEAC turntables MC-D800 LP-P1000/LP-R500/LP-R550.Product weight:0.02 kilograms

TA-HS2 Headshell for TN-280BT, BlackManufacturer number:TA-HS2Product weight:30.0 kilogramsPieces per master carton:1 Piece

This 78 RMP replacement stylus is compatible with TEAC turntables LP-P1000/LP-R500/LP-R550.Product weight:0.01 kilograms

Phono equalizing amplifier with dual monaural and fully-balanced input/output circuit design .The PE-505 is a phono equalizing amplifier with dual monaural and fully-balanced input/output circuits that support balanced MC input.The development of the PE-505 was achieved by relying on TEAC’s audio technology expertise, focusing on recording and playback, with the goal of accurately reproducing the original intent of the recording producers. The PE-505 will amplify even very faint audio signals picked up by the cartridge, process them without coloration, and then deliver them faithfully in order to keep the listener as close as possible to the original sound that was played before it was engraved on the master disc.The high precision RIAA correction circuit, as well as both DECCA and COLUMBIA curves are supported. In addition, selectable load resistance for MC cartridges and load capacity for MM cartridges are present; allowing users to optimize the settings for the type of cartridge used and for the condition of the record.Features at a glanceFull differential inputs/outputs circuitsHigh-precision RIAA EQ circuit achieves less than 0.05dB of deviationIndividual EQ curves for monaural records and ones with EQ from DECCA and COLUMBIABalanced MC inputSwitchable MC impedance (10, 22, 47, 100, 220, 470, 1kΩ)Switchable MM load-impedance capacity (0, 100, 220, 330pF)MC load-impedance measurement functionSwitchable MM/MC gain (High/Low)Subsonic detectionSubsonic filter (17Hz, –24dB/oct.)MONO function that mixes left and right channels as a monaural channelDEMAG function that de-magnetizes cartridge3-position pin-point feetGND terminalRoHS compliantFully-balanced circuit designFrom the head amplifier to the equalizing amplifier sections to the buffer amplifier section on the final output stage; the PE-505 employs a fully-balanced circuit design throughout all stages that amplifies, equalizes, and maintains signal purity of even the most extremely faint audio signals picked up by a cartridge.Even unbalanced signal on the conventional RCA input is converted to the differential processing mode right after the input terminals.Equalizing circuit on the differential cartridge outpAbsorbing errors on the balanced output, the differential output equalizing circuit delivers a more accurate audio signal. The differential output circuit that cross-multiplied the hot and cold outputs each other. As the result, both signals are equalized for a pure and natural audio signal delivery.High-precision RIAA circuitA newly developed NF-type equalizing amplifier achieves less than ±0.05dB of RIAA deviation.(20Hz to 20kHz)High Signal-to-Noise ratioThe PE-505 achieves 106dB on the RCA input*1, and 86dB on the XLR input*2, while the residual noise voltage reaches 10μV on the MM and 85μV on the MC*3 which are sophisticated.*1 MM *2 MC *3 XLR inputHigh-precision OLD EQ curvesAs well as the modern RIAA curve, individual curves on monaural records from DECCA and COLUMBIA issued before the RIAA curve was defined in 1955 are also supported.Versatile settings and unique measuring functionsThe PE-505 equips switchable load-capacity for MM cartridges and switchable load-resistance for MC cartridges. Furthermore, the load-resistance measuring function allows users to select an appropriate load-resistance by pressing the MEASURE key on the front panel to show the total load-resistance value including cable resistance on the gauge.Also, the Subsonic function shows subsonic signals less than 6Hz on the gauge, while the subsonic filter (17Hz, -24dB/octave) cuts unnecessary low frequency out of the hearing range.DEMAG function to refresh the cartridgesWith the quick demagnetize function, both magnetized iron cores of MC cartridges and the step-up transformer are demagnetized by playing back a vinyl record for as short as 30 seconds with the DEMAG position.

Phono equalizing amplifier with dual monaural and fully-balanced input/output circuit design .The PE-505 is a phono equalizing amplifier with dual monaural and fully-balanced input/output circuits that support balanced MC input.The development of the PE-505 was achieved by relying on TEAC’s audio technology expertise, focusing on recording and playback, with the goal of accurately reproducing the original intent of the recording producers. The PE-505 will amplify even very faint audio signals picked up by the cartridge, process them without coloration, and then deliver them faithfully in order to keep the listener as close as possible to the original sound that was played before it was engraved on the master disc.The high precision RIAA correction circuit, as well as both DECCA and COLUMBIA curves are supported. In addition, selectable load resistance for MC cartridges and load capacity for MM cartridges are present; allowing users to optimize the settings for the type of cartridge used and for the condition of the record.Features at a glanceFull differential inputs/outputs circuitsHigh-precision RIAA EQ circuit achieves less than 0.05dB of deviationIndividual EQ curves for monaural records and ones with EQ from DECCA and COLUMBIABalanced MC inputSwitchable MC impedance (10, 22, 47, 100, 220, 470, 1kΩ)Switchable MM load-impedance capacity (0, 100, 220, 330pF)MC load-impedance measurement functionSwitchable MM/MC gain (High/Low)Subsonic detectionSubsonic filter (17Hz, –24dB/oct.)MONO function that mixes left and right channels as a monaural channelDEMAG function that de-magnetizes cartridge3-position pin-point feetGND terminalRoHS compliantFully-balanced circuit designFrom the head amplifier to the equalizing amplifier sections to the buffer amplifier section on the final output stage; the PE-505 employs a fully-balanced circuit design throughout all stages that amplifies, equalizes, and maintains signal purity of even the most extremely faint audio signals picked up by a cartridge.Even unbalanced signal on the conventional RCA input is converted to the differential processing mode right after the input terminals.Equalizing circuit on the differential cartridge outpAbsorbing errors on the balanced output, the differential output equalizing circuit delivers a more accurate audio signal. The differential output circuit that cross-multiplied the hot and cold outputs each other. As the result, both signals are equalized for a pure and natural audio signal delivery.High-precision RIAA circuitA newly developed NF-type equalizing amplifier achieves less than ±0.05dB of RIAA deviation.(20Hz to 20kHz)High Signal-to-Noise ratioThe PE-505 achieves 106dB on the RCA input*1, and 86dB on the XLR input*2, while the residual noise voltage reaches 10μV on the MM and 85μV on the MC*3 which are sophisticated.*1 MM *2 MC *3 XLR inputHigh-precision OLD EQ curvesAs well as the modern RIAA curve, individual curves on monaural records from DECCA and COLUMBIA issued before the RIAA curve was defined in 1955 are also supported.Versatile settings and unique measuring functionsThe PE-505 equips switchable load-capacity for MM cartridges and switchable load-resistance for MC cartridges. Furthermore, the load-resistance measuring function allows users to select an appropriate load-resistance by pressing the MEASURE key on the front panel to show the total load-resistance value including cable resistance on the gauge.Also, the Subsonic function shows subsonic signals less than 6Hz on the gauge, while the subsonic filter (17Hz, -24dB/octave) cuts unnecessary low frequency out of the hearing range.DEMAG function to refresh the cartridgesWith the quick demagnetize function, both magnetized iron cores of MC cartridges and the step-up transformer are demagnetized by playing back a vinyl record for as short as 30 seconds with the DEMAG position.

Employing an ultra-stable, direct-drive motor, a classically designed turntable with knife-edge tonearm bearingsThe TN-4D-SE is a direct-drive, analog turntable with an elegant, low-profile design, made possible by the use of a newly-developed brushless DC servo motor.Its brushless DC motor (with feedback control system) achieves crystal-locked speed stability and smoother rotation while also eliminating cogging*. This low-profile motor allowed us to design a plinth that’s extraordinarily sleek and stylish compared to that of most other direct drive turntables. The new tonearm employs knife-edge, pivot-point bearings, developed in collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer. The result is an insightful, high-resolution sound quality that tonearms with conventional bearings can’t match. Partnering it is a carefully designed PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. A high quality NJM8080 op-amp, specially designed for hi-fi applications by New Japan Radio Corporation, is employed to convey the finest of musical detail.To extract the music from your vinyl, the TN-4D-SE comes with a highly-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Noted for its innate musicality, the cartridge comes pre-installed on the headshell at the factory, allowing near ‘plug and play’ operation. The S-shaped tonearm meanwhile allows for quick cartridge/headshell swaps, so users can alter the sound quality by experimenting with different cartridges, if the desire takes them.The TN-4D-SE is an analog turntable that achieves highly accurate rotational speeds and is very distinctive, for a direct-drive design, thanks to its sleek and stylish aesthetics.Features at a glanceDirect-drive analog turntableCrystal-locked speed stability, thanks to a new brushless DC motor with feedback controlDie-cast aluminium platterKnife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAECMulti-layer piano black or natural walnut veneer finishBuilt-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)Audiophile-grade NJM8080 op-amp used in PHONO EQ stage2-speed drive offering 33-? and 45 rpmGold-plated oxidation-resistant output connectorsOyster MM cartridge by SUMIKOShock-absorbing insulating feetGND terminalRoHS compliantA sleek motor, developed exclusively for direct-drive turntablesThe TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.Knife-edge, pivot-point tone-arm bearingsTN-4D-SEIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D-SE's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)Precision anti-skating and stylus-pressure adjustmentAs you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.Pre-installed Oyster cartridge by SUMIKOThe TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.Built-in PHONO EQ amplifier supporting MM cartridgesThe TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.Die-cast aluminium platterIn conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.2-speed turntable for 33-? and 45 rpmThe TN-4D-SE supports 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Employing an ultra-stable, direct-drive motor, a classically designed turntable with knife-edge tonearm bearingsThe TN-4D-SE is a direct-drive, analog turntable with an elegant, low-profile design, made possible by the use of a newly-developed brushless DC servo motor.Its brushless DC motor (with feedback control system) achieves crystal-locked speed stability and smoother rotation while also eliminating cogging*. This low-profile motor allowed us to design a plinth that’s extraordinarily sleek and stylish compared to that of most other direct drive turntables. The new tonearm employs knife-edge, pivot-point bearings, developed in collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer. The result is an insightful, high-resolution sound quality that tonearms with conventional bearings can’t match. Partnering it is a carefully designed PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. A high quality NJM8080 op-amp, specially designed for hi-fi applications by New Japan Radio Corporation, is employed to convey the finest of musical detail.To extract the music from your vinyl, the TN-4D-SE comes with a highly-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Noted for its innate musicality, the cartridge comes pre-installed on the headshell at the factory, allowing near ‘plug and play’ operation. The S-shaped tonearm meanwhile allows for quick cartridge/headshell swaps, so users can alter the sound quality by experimenting with different cartridges, if the desire takes them.The TN-4D-SE is an analog turntable that achieves highly accurate rotational speeds and is very distinctive, for a direct-drive design, thanks to its sleek and stylish aesthetics.Features at a glanceDirect-drive analog turntableCrystal-locked speed stability, thanks to a new brushless DC motor with feedback controlDie-cast aluminium platterKnife-edge, pivot-point tonearm base, designed by high-end tonearm manufacturer SAECMulti-layer piano black or natural walnut veneer finishBuilt-in PHONO EQ amplifier for high-quality sound (PHONO/LINE switchable)Audiophile-grade NJM8080 op-amp used in PHONO EQ stage2-speed drive offering 33-? and 45 rpmGold-plated oxidation-resistant output connectorsOyster MM cartridge by SUMIKOShock-absorbing insulating feetGND terminalRoHS compliantA sleek motor, developed exclusively for direct-drive turntablesThe TN-4D-SE uses a sleek, brushless DC motor, offering crystal-locked speed accuracy, regulated by a computer-controlled feedback circuit and achieving low wow-and-flutter levels for a direct drive turntable, especially one with such a stylish, low-profile design.Knife-edge, pivot-point tone-arm bearingsTN-4D-SEIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-4D-SE's tonearm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements encountered by this tonearm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tonearm also employs a universal headshell fitting, allowing users to quickly and easily swap cartridges/headshells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)Precision anti-skating and stylus-pressure adjustmentAs you might expect, the tonearm is equipped with a counterweight, for precise stylus-pressure adjustment, and an anti-skating mechanism.Pre-installed Oyster cartridge by SUMIKOThe TN-4D-SE comes with a well-regarded Oyster MM cartridge from SUMIKO – a legendary American cartridge manufacturer. Regardless of the type of music, the Oyster cartridge delivers a powerful but insightful performance.Built-in PHONO EQ amplifier supporting MM cartridgesThe TN-4D-SE comes with a built-in PHONO EQ amplifier that allows you to directly connect the turntable to the line-level inputs of your existing hi-fi system. The NJM8080 IC from New Japan Radio Corporation is employed for op-amp duties, bringing up the level of the tiny signals received via the cartridge up to LINE level strength without any loss of quality.Die-cast aluminium platterIn conjunction with the newly-developed motor, the high inertia, die-cast aluminium platter helps to achieve better speed stability.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics the TN-4D-SE is very resistant to acoustic feedback.2-speed turntable for 33-? and 45 rpmThe TN-4D-SE supports 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.

Analog turntable with Bluetooth® Qualcomm® aptX™ transmitter that streams music from LP Records wirelesslyThe TN-400BT-X is an analog turntable that also enables to playback LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT-X to be connected to a conventional hi-fi audio system not having phono input.A built-in Bluetooth® transmitter codec supports Qualcomm® aptX™ Adaptive. It enables to playback LP records with high-quality audio and low-latency via Bluetooth® headphones or Bluetooth® speakers supporting the Qualcomm® aptX™ Adaptive.For convenience, a quality Japanese-made moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.Features at a glanceRobust high-density MDF plinth provides both vibration isolation and eleganceAvailable in a selection of contemporary matt finishes, or a natural walnut veneer3-speed belt-drive mechanism with aluminum die-cast platter (33-?, 45, 78 rpm)Low-resistance spindle for stable rotational speedStatic-balanced S-shaped tone-arm with universal-type headshellPre-installed MM-type AT95E cartridge from audio-technicaBuilt-in Phono EQ AmplifierHigh-quality Bluetooth® Qualcomm® aptX™ and Qualcomm® aptX™ Adaptive wireless audio transmissionFloating-construction using decoupled feet provides high feedback resistanceMachined aluminum operation knobs and feetGold-plated RCA jacks (for LINE/PHONO output) and tone-arm contactsGND terminal on rear panelRCA audio cable with GND wiring included     *This product does not have a USB digital output.

A new, high-performance standard for belt-drive analog turntablesThe TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier.It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by audio-technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.Features at a glanceBelt-drive mechanism2-speed turntable supporting 33-? and 45 rpmKnife-edge, pivot-point tonearm, designed by high-end tonearm manufacturer SAECAluminum die-cast platterBuilt-in PHONO EQ amplifier compatible with MM-type cartridgesHi-fi grade op-amp, NJM8080, used in PHONO EQ stageAnti-skating mechanismPHONO/LINE analog output (switchable)Gold-plated oxidation-resistant output connectorsPre-installed AT-VM95E cartridge supplied by audio-technicaRigid, high-density MDF plinth with multi-layered lacquer finishShock-absorbing insulating feetGND terminalRoHS compliantKnife-edge, pivot-point tone-arm bearingsIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-3B's tone-arm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements that take place in this tone-arm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tone-arm also employs a universal head-shell fitting, allowing users to quickly and easily swap cartridges/head-shells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)?Precision anti-skating and stylus-pressure adjustmentThe static-balanced, S-shape tone-arm is equipped with a counterweight for precise stylus-pressure adjustment, as well as an anti-skating mechanism for accurate tracking force adjustment, allowing the cartridge to accurately play any quality vinyl disc.Pre-installed VM-series cartridgeA VM-type cartridge the AT-VM95E manufactured by audio-technica exclusive for TEAC with an elliptical-shaped stylus tip comes pre-installed on the head-shell for convenience. After you’ve opened the box, set up the platter and mounted the head-shell on the tonearm, you'll be ready to enjoy your records.* Replacement styli should be available at the retail store where you purchased the unit, or via the TEAC On-line store. (TEAC On-line store is available in selected countries.)* The VM-series cartridge is a MM (Moving Magnet) type design, and is compatible with all conventional MM-type phono EQ amplifiers.Built-in MM-type phono EQ amplifierThe TN-3B-SE incorporates an MM-type phono EQ amplifier, allowing you to connect the turntable to a conventional amplifier/hi-fi system that lacks a PHONO input. A low distortion, hi-fi-grade op-amp, the NJM8080, is employed to boost the low-level signals from the phono cartridge up to LINE level.External belt-drive with aluminum die-cast platterA belt-drive arrangement is employed in order to minimise any motor cogging effects by driving the outer rim of the platter (which has a larger diameter, mass and surface area).Luxurious, multi-layer lacquer paint finishAll internal components are mounted on a robust and high-density MDF plinth for rigidity and vibration-deadening. Thanks to its sleek and stylish design, the TN-3B looks at home in most domestic environments, creating the perfect setting for listening to vinyl records.33-? and 45 rpm 2-speed turntableThe TN-3B-SE supports both 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell, topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics, the TN-3B-SE is very resistant to acoustic feedback.Honeycomb patterned bottom panelIn order to achieve sleek cabinet design without compromising rigidity, the bottom panel is imprinted with a honeycomb pattern that minimises unwanted vibrations.

A new, high-performance standard for belt-drive analog turntablesThe TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier.It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by audio-technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.Features at a glanceBelt-drive mechanism2-speed turntable supporting 33-? and 45 rpmKnife-edge, pivot-point tonearm, designed by high-end tonearm manufacturer SAECAluminum die-cast platterBuilt-in PHONO EQ amplifier compatible with MM-type cartridgesHi-fi grade op-amp, NJM8080, used in PHONO EQ stageAnti-skating mechanismPHONO/LINE analog output (switchable)Gold-plated oxidation-resistant output connectorsPre-installed AT-VM95E cartridge supplied by audio-technicaRigid, high-density MDF plinth with multi-layered lacquer finishShock-absorbing insulating feetGND terminalRoHS compliantKnife-edge, pivot-point tone-arm bearingsIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-3B's tone-arm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements that take place in this tone-arm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tone-arm also employs a universal head-shell fitting, allowing users to quickly and easily swap cartridges/head-shells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)?Precision anti-skating and stylus-pressure adjustmentThe static-balanced, S-shape tone-arm is equipped with a counterweight for precise stylus-pressure adjustment, as well as an anti-skating mechanism for accurate tracking force adjustment, allowing the cartridge to accurately play any quality vinyl disc.Pre-installed VM-series cartridgeA VM-type cartridge the AT-VM95E manufactured by audio-technica exclusive for TEAC with an elliptical-shaped stylus tip comes pre-installed on the head-shell for convenience. After you’ve opened the box, set up the platter and mounted the head-shell on the tonearm, you'll be ready to enjoy your records.* Replacement styli should be available at the retail store where you purchased the unit, or via the TEAC On-line store. (TEAC On-line store is available in selected countries.)* The VM-series cartridge is a MM (Moving Magnet) type design, and is compatible with all conventional MM-type phono EQ amplifiers.Built-in MM-type phono EQ amplifierThe TN-3B-SE incorporates an MM-type phono EQ amplifier, allowing you to connect the turntable to a conventional amplifier/hi-fi system that lacks a PHONO input. A low distortion, hi-fi-grade op-amp, the NJM8080, is employed to boost the low-level signals from the phono cartridge up to LINE level.External belt-drive with aluminum die-cast platterA belt-drive arrangement is employed in order to minimise any motor cogging effects by driving the outer rim of the platter (which has a larger diameter, mass and surface area).Luxurious, multi-layer lacquer paint finishAll internal components are mounted on a robust and high-density MDF plinth for rigidity and vibration-deadening. Thanks to its sleek and stylish design, the TN-3B looks at home in most domestic environments, creating the perfect setting for listening to vinyl records.33-? and 45 rpm 2-speed turntableThe TN-3B-SE supports both 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell, topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics, the TN-3B-SE is very resistant to acoustic feedback.Honeycomb patterned bottom panelIn order to achieve sleek cabinet design without compromising rigidity, the bottom panel is imprinted with a honeycomb pattern that minimises unwanted vibrations.

A new, high-performance standard for belt-drive analog turntablesThe TN-3B-SE is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier.It employs a new tonearm with knife-edge, pivot-point bearings, collaborated with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution. The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation. The TN-3B-SE also employs a VM-type cartridge the AT-VM95E manufactured by audio-technica and a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality.The TN-3B-SE delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.Features at a glanceBelt-drive mechanism2-speed turntable supporting 33-? and 45 rpmKnife-edge, pivot-point tonearm, designed by high-end tonearm manufacturer SAECAluminum die-cast platterBuilt-in PHONO EQ amplifier compatible with MM-type cartridgesHi-fi grade op-amp, NJM8080, used in PHONO EQ stageAnti-skating mechanismPHONO/LINE analog output (switchable)Gold-plated oxidation-resistant output connectorsPre-installed AT-VM95E cartridge supplied by audio-technicaRigid, high-density MDF plinth with multi-layered lacquer finishShock-absorbing insulating feetGND terminalRoHS compliantKnife-edge, pivot-point tone-arm bearingsIn collaboration with SAEC Corporation, a world-famous, high-end tonearm manufacturer, the TN-3B's tone-arm employs a knife-edge, pivot-point bearing. Unlike the case for tonearms with conventional bearings, any fine vertical movements that take place in this tone-arm actually help in delivering a more dynamic sound with excellent resolution. The S-shaped tone-arm also employs a universal head-shell fitting, allowing users to quickly and easily swap cartridges/head-shells, and supports a wide range of cartridge weights (from 14 - 23g / 0.5 - 0.8 oz.)?Precision anti-skating and stylus-pressure adjustmentThe static-balanced, S-shape tone-arm is equipped with a counterweight for precise stylus-pressure adjustment, as well as an anti-skating mechanism for accurate tracking force adjustment, allowing the cartridge to accurately play any quality vinyl disc.Pre-installed VM-series cartridgeA VM-type cartridge the AT-VM95E manufactured by audio-technica exclusive for TEAC with an elliptical-shaped stylus tip comes pre-installed on the head-shell for convenience. After you’ve opened the box, set up the platter and mounted the head-shell on the tonearm, you'll be ready to enjoy your records.* Replacement styli should be available at the retail store where you purchased the unit, or via the TEAC On-line store. (TEAC On-line store is available in selected countries.)* The VM-series cartridge is a MM (Moving Magnet) type design, and is compatible with all conventional MM-type phono EQ amplifiers.Built-in MM-type phono EQ amplifierThe TN-3B-SE incorporates an MM-type phono EQ amplifier, allowing you to connect the turntable to a conventional amplifier/hi-fi system that lacks a PHONO input. A low distortion, hi-fi-grade op-amp, the NJM8080, is employed to boost the low-level signals from the phono cartridge up to LINE level.External belt-drive with aluminum die-cast platterA belt-drive arrangement is employed in order to minimise any motor cogging effects by driving the outer rim of the platter (which has a larger diameter, mass and surface area).Luxurious, multi-layer lacquer paint finishAll internal components are mounted on a robust and high-density MDF plinth for rigidity and vibration-deadening. Thanks to its sleek and stylish design, the TN-3B looks at home in most domestic environments, creating the perfect setting for listening to vinyl records.33-? and 45 rpm 2-speed turntableThe TN-3B-SE supports both 33-? and 45 rpm for LP and EP records. Our insistence on quality engineering can even be seen in the construction of the rotary control for start-up/speed selection, formed of machined aluminium.Insulating feet with excellent shock absorptionThe insulating feet comprise a machined aluminium shell, topped with a rubber cushion that is fixed to the high-density MDF plinth. Thanks to their excellent shock absorption characteristics, the TN-3B-SE is very resistant to acoustic feedback.Honeycomb patterned bottom panelIn order to achieve sleek cabinet design without compromising rigidity, the bottom panel is imprinted with a honeycomb pattern that minimises unwanted vibrations.

A wireless turntable for new way of enjoying vinyl recordsThe TN-280BT-A3 is not only a great-sounding turntable for music enthusiastic who want to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth® capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth® speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.The TN-280BT-A3 also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.The belt-drive motor on the TN-280BT-A3 reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge AT3600L from audio-technica captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.For music enthusiasts who want to hear every sensuous note of their vinyl collection.Features at a glanceBelt-drive turntableBuilt-in Bluetooth® transmitterBuilt-in MM phono equalizing amplifierPHONO, LINE, and Bluetooth® outputsVM cartridge audio-technica AT3600L from audio-technica includedAluminum die-cast platter with felt matAnti-skating mechanism2-speed (33-1/3, 45 rpm)High-density MDF cabinet for better vibration and resonanceSleek design in black or walnut finishBuilt-in Bluetooth® transmitterThe TN-280BT-A3 delivers the sound wirelessly via built-in Bluetooth® transmitter, in addition to conventional RCA output in analog Line or Phono format. The pairing button is located at the right-front side of the cabinet, and pairing indicator tells you the speakers/headphone is successfully connected.A new way of record playingUnlike other turntable units, the TN-280BT-A3 provides you the simplest way of listening to vinyl records via Bluetooth® wireless technology.If you already have a Bluetooth-enable speakers or headphone for your iPhone/Android phone, all you have to do is to install the TN-280BT-A3 in your room – no pricy hi-fi system and complicated wiring are required –. The connection is as simple as ABC, just press the BT pairing button when the Bluetooth® speakers/headphones are ready to the pairing, and once the connection is established, you don't need to repeat the same process every time you listening to vinyl records.The TN-280BT-A3 also provides conventional ways of connection to hi-fi system with or without PHONO input via cable, and an RCA audio cable comes with the TN-280BT-A3.An authentic 2-speed TurntableThe high inertia Aluminum die-cast platter is driven by a high torque DC motor for stable rotation for both 33-? and 45 rpm. A soft felt mat further reduces vibration effectively. The high accuracy of the spindle is maintained by a polished Stainless steel Spindle and highly durable bronze spindle holder.High-density MDF cabinet constructionUnlike other with plastic chassis, the heavy MDF cabinet minimizes vibrations and resonance for clearer sound when you playback your vinyl collection.Built-in MM-type Phono EQ amplifierEnjoy vinyl playback with any amplifier. The TN-280BT-A3 supports both Phono and Line outputs that allow you to enjoy vinyl records with or without phono equalizer.VM-type cartridge pre-installed for quick startA straight tone-arm is employed for high tracking accuracy. The anti-skating mechanism also ensures accurate tracking of vinyl records. An VM-type (equivalent to MM-type) cartridge audio-technica AT3600L is installed at the factory.Anti-skating adjustment for accurate trackingSame as upper models, the TN-280BT-A3’s anti-skating mechanism ensures accurate tracking.

A wireless turntable for new way of enjoying vinyl recordsThe TN-280BT-A3 is not only a great-sounding turntable for music enthusiastic who want to enjoy vinyl record from closet or re-issues. It brings you a totally new way of listening to vinyl records with its Bluetooth® capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth® speakers or headphones you might have for iPhones are required to enjoy the world of vinyl records.The TN-280BT-A3 also accommodates a built-in Phono EQ amplifier that provides Line output, and allows you to connect to almost any sound system regardless type of inputs.The belt-drive motor on the TN-280BT-A3 reduces vibration for sweeter, more accurate sound than direct-drive turntables for DJ, while an aluminum die-cast platter and anti-skating system provide a solid foundation for great-sounding playback. The high-performance, upgradable MM cartridge AT3600L from audio-technica captures every detail on your record, and the static-balanced straight tone-arm ensures clear sound. It’s all housed in a handsome case in black or walnut veneer.For music enthusiasts who want to hear every sensuous note of their vinyl collection.Features at a glanceBelt-drive turntableBuilt-in Bluetooth® transmitterBuilt-in MM phono equalizing amplifierPHONO, LINE, and Bluetooth® outputsVM cartridge audio-technica AT3600L from audio-technica includedAluminum die-cast platter with felt matAnti-skating mechanism2-speed (33-1/3, 45 rpm)High-density MDF cabinet for better vibration and resonanceSleek design in black or walnut finishBuilt-in Bluetooth® transmitterThe TN-280BT-A3 delivers the sound wirelessly via built-in Bluetooth® transmitter, in addition to conventional RCA output in analog Line or Phono format. The pairing button is located at the right-front side of the cabinet, and pairing indicator tells you the speakers/headphone is successfully connected.A new way of record playingUnlike other turntable units, the TN-280BT-A3 provides you the simplest way of listening to vinyl records via Bluetooth® wireless technology.If you already have a Bluetooth-enable speakers or headphone for your iPhone/Android phone, all you have to do is to install the TN-280BT-A3 in your room – no pricy hi-fi system and complicated wiring are required –. The connection is as simple as ABC, just press the BT pairing button when the Bluetooth® speakers/headphones are ready to the pairing, and once the connection is established, you don't need to repeat the same process every time you listening to vinyl records.The TN-280BT-A3 also provides conventional ways of connection to hi-fi system with or without PHONO input via cable, and an RCA audio cable comes with the TN-280BT-A3.An authentic 2-speed TurntableThe high inertia Aluminum die-cast platter is driven by a high torque DC motor for stable rotation for both 33-? and 45 rpm. A soft felt mat further reduces vibration effectively. The high accuracy of the spindle is maintained by a polished Stainless steel Spindle and highly durable bronze spindle holder.High-density MDF cabinet constructionUnlike other with plastic chassis, the heavy MDF cabinet minimizes vibrations and resonance for clearer sound when you playback your vinyl collection.Built-in MM-type Phono EQ amplifierEnjoy vinyl playback with any amplifier. The TN-280BT-A3 supports both Phono and Line outputs that allow you to enjoy vinyl records with or without phono equalizer.VM-type cartridge pre-installed for quick startA straight tone-arm is employed for high tracking accuracy. The anti-skating mechanism also ensures accurate tracking of vinyl records. An VM-type (equivalent to MM-type) cartridge audio-technica AT3600L is installed at the factory.Anti-skating adjustment for accurate trackingSame as upper models, the TN-280BT-A3’s anti-skating mechanism ensures accurate tracking.