Adapters

Καλώδιο line mini jack stereo - 2 rca male 3 meters.

Furutech FT-SWS-D NCF (R)Dual Schuko Main Socket Rhodium Plated Copper NCFThe Furutech FT-SWS-D NCF (R) is a dual wall socket with Schuko high-end connectors. Its high design quality allows it to provide an undegraded AC electrical signal that greatly contributes to the audio reproduction quality of your system.The contacts of these sockets are made of pure Copper with Rhodium plating, ensuring excellent signal conductivity. In addition, these contacts are processed Alpha (α). The facade of the socket is covered with a magnificent Carbon and Fiberglass cladding.Nano Crystal² Formula (NCF)Integrated in a selection of Furutech products, NCF is based on a special crystalline material with two active properties. First, the NCF generates negative ions that eliminate static electricity. Second, it converts thermal energy into infrared. Furutech combines this material with ceramic nanoparticles and carbon powder for their piezoelectric damping properties. Furutech thus obtains the optimal electrical and mechanical damping material.

This FURUTECH FI-50 (R) connector is dedicated to the realization of high-end mains cable. Its conductors in Pure Copper plated Rhodium "Furutech Alpha α" make it a highly audiophile connector.

Wireless Subwoofer Adapter KitComprising a discreet transmitter and receiver, KEF KW1 works with the Kube, KC62 and KC92 subwoofers. It allows KEF subs to be optimally placed, and not limited by cables. High-quality wireless transmission delivers every ounce of detail and impact from your favourite films and music.The receiver is also available separately, allowing two KEF subwoofers to receive the same signal wirelessly from the same transmitter.Features:Lossless Audio – 5.2 & 5.8GHz selectable digital wireless link for near lossless audioAdvanced Algorithm – Advanced RF Selection AlgorithmWide Range – Up to 15 meter (30m/ 100 ft line of sight) operational distance between transmitter and receiverLow Latency – Designed with latency of

Features:Lossless Audio – 5.2 & 5.8GHz selectable digital wireless link for near lossless audioAdvanced Algorithm – Advanced RF Selection AlgorithmWide Range – Up to 15 meter (30m/ 100 ft line of sight) operational distance between transmitter and receiverLow Latency – Designed with latency of

Metro Audio Systems επαγγελματικό καλώδιο PY-020/0.5M, τύπου Y, 1 x RCA αρσενικό σε 2 x RCA αρσενικά, 0.5m. Το καλώδιο είναι επενδυμένο με PVC μαύρου χρώματος, διαθέτει θωράκιση, είναι OFC και μήκους 0.5 μέτρων.

Speakon 2 πόλων, για καλώδια διατομής 6-12mm

4 pole speakON cable connector, screw terminal assembly, chuck type strain relief for cable diameters 6 to 12 mmspeakON connectors are the industry-standard for loudspeaker connections. This product series offers extremely reliable and robust cable connectors with a proven twist lock system. speakON cable connectors feature solid contacts with screw-type terminals including a stranded wire protection

Καρφί θηλυκό stereo προεκτάσεως

Cable 1J3P35M->2RCAM 3m

Cable from one straight mini jack 3.5mm stereo male to two straight jacks 6.3mm mono male 2m.The junction of the two wires ending in the two large jacks is located near the small stereo stud at a distance of 10 centimeters from the plug and each leg is approximately 1.90 meters long. This design allows the connection of speakers or other devices that accept a large jack and are located at a distance from each other.

Line cable 3 mt (jack stereo 6,3mm to 2 x jack mono 6,3mm).

Hicon HI-J63MA05 Αρσενικό Γωνιακό Βύσμα Καρφί 6,3mm TS 2 Πόλων για Καλώδιο - Μαύρο

The MuxLab Digital Audio Extender Kit (500086) allows one (1) Digital Coax (S/PDIF) or Digital Optical (TOSLINK) source to be connected to a Digital Audio Receiver that supports either Digital Coax (S/PDIF), or Digital Optical ( TOSLINK) inputs. The audio transmission signal can be distributed up to 150m point-to-point with a Cat5e/6.

This HDMI extender enables you to extend the 4K 60Hz signal from a TV decoder or other HDMI source over 1 CAT 5e/6 cable up to 120 metres to a TV or beamer at a location of your choice, such as a shop window or lecture hall. The HDBaseT protocol supported by the set ensures perfect image transmission. You can control a connected decoder remotely using CEC's IR return function. This set is also equipped with EDID, bidirectional PoC, loopthrough, HDR, RS-232 & passthrough.4K60 Ultra HDExtension to 120mIR Return Function18 GbpsExtend a 4K video signal up to 120 metres using a single CAT5e/CAT6 cable.Suitable for Ultra HD 4K60 resolution (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color and 4:4:4 chroma colours.Operate AV equipment remotely using the integrated infrared return channel or Consumer Electronics Control (CEC).Built-in Power over Cable (PoC) for use of a single power adapter (transmitter or receiver).Supports High Definition LPCM 7.1 CH, Dolby TrueHD, Dolby Atmos, DTS:X and DTS-HD Master Audio.HDMI loopthrough outputs a copy of the AV signal to feed a local display or projector.De-embed 2.0CH analogue audio from the receiver to connect to a seperate audio system.

Stereo Audio Hi-Fi Balun from RCA plug to Cat5 plug. High quality audio signal transfer (20Hz - 20kHz) via UTP (Cat5) cable. Used in pairs. Signal transmission up to 990m.

Metro Audio Systems professional cable PY-030/0.5M, type Y, 1 x RCA female to 2 x RCA male, 0.5m. The cable is coated with black PVC, has OFC shielding and is 3 meters long.

Balun για μεταφορά stereo αναλογικού σήματος ήχου από βύσμα (RCA) μέσω ενός καλωδίου UTP (Cat5/Cat6). Για μεταφορά σήματος line. Δυνατότητα λειτουργίας σε συνδυασμό με τα baluns 500019, 500001, 500012, 500017, και 500200. Μεταφορά σήματος ήχου έως 1.5Km.

A professional IR extender to operate an unlimited number of devices from a large distance, using your own remote control. Operate a set-top box from up to 300 metres away. Use your existing remote control and a UTP cable (max. length 300 m). The IR Control 10 XTRA can be positioned virtually invisibly and has blaster LEDs. Decide from your office what patients in the waiting room get to watch on a TV.

The e-TP80 is a sophisticated, luxuriously made power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.The AC waveform becomes severely distorted by ground noise, voltage spikes and sags, high frequency power supply noise from other components in your own system,plus radiated high frequency digital noise from processors and digital interconnects.There are also distortion products at the top and bottom of the AC waveform created by switch-mode power supplies in electronic devices on the same circuit. Additionally, you’re never alone; your residential AC mains supply is shared with other apartments,homes, and businesses on the same utility transformer. That’s why many audio and video enthusiasts notice their systems are more enjoyable late at night or on weekends!The beautifully crafted special grade aluminum chassis effectively shields against another common problem, RFI (Radio Frequency Interference), and a layer of Formula GC-303 blocks EMI (Electro Magnetic Interference).Internal wiring is FURUTECH μ-14 wire（14 AWG） that guarantees low resistance. Furutech Hyper Quality Audio Grade Receptacles are wired to the IEC AC input of the e-TP80. Receptacles feature 24K gold-plated phosphor bronze, non-magnetic conductors for stable, long lasting, optimized power transfer. Formula GC-303GC-303 is a special material Furutech bonds to the interior bottom-plate of the chassis that absorbs EMI(Electromagnetic Interference) generated by the internal fittings of the unit. Furutech’s Two-Stage Cryogenic and Demagnetizing Alpha ProcessUsing cutting-edge technology and materials, Furutech developed a low-temperature two-stage process that significantly improves every facet of audio and video performance. The treatment begins during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using high-end refrigerants -- liquid N2 or He -- Furutech achieves temperatures of between -196 to -250°C. The treated parts actually change their molecular structure at these extremes of temperature relieving internal stress. The molecules bond together more tightly and the overall structure becomes more stable. This improves electrical conductivity and so power and signal transfer.Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization treatment. Ordinary high power magnets used for this purpose often increase magnetic effects; they leave some areas more magnetized than others. This patented process uses controlled attenuation to completely eliminate magnetization for immediately more vivid and colorful improvements. Ring Demagnetization further enhances conductivity of all treated materials.ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable and highly conductive state.The Final ResultThe 2-Step Alpha Cryogenic and Demagnetizing Process works in tandem with other designed-in features to create the most optimized AC power transfer possible. Furutech’s scientific outlook, total awareness and devotion to detail results in a greater sense of power, dynamics, and resolution, with cleaner, blacker backgrounds and a larger, more stable soundstage, vivid tonal colors and deeper extension at both ends of the frequency range. The e-TP80 will allow the delicacy, refinement and nuance of a performance through, along with micro- and macro-dynamics that will leave you breathlessly engaged. Displays of all types will exhibit greater, sharper resolution with less ghosting, color shift, “snow”, or vertical and horizontal lines.

3-pin αρσενικό προεκτάσεως (Συσκ.50τεμ)

Speaκon προεκτάσεως 4 επαφών (Συσκ.25τεμ)

Furutech’s Pure Transmission FI-50 Piezo Ceramic series connector bodies and housings feature several breakthrough construction techniques. A multilayer nonmagnetic stainless steel and carbon fiber shell incorporates a special damping and insulating acetal copolymer. Furutech settled on stainless and carbon fiber for the outer housing after extensive listening sessions with Japanese industry figures and audiophiles. The body of the connectors combines two “active” materials: Nano-sized ceramic particles and powdered carbon. (Only nano-sized ceramic particles effectively couples with carbon powder.) Nylon and fiberglass are incorporated as well forming an extremely effective, well damped, mechanically and electrically nonresonant connector body. That’s correct, they’re electrically damped as well. Piezoelectric effects are the key. Furutech’s breakthrough in design and materials is based on employing nano-sized polycrystalline ferroelectric ceramic particles exhibiting electro-generative properties; mechanical pressure creates an electrical charge forming a bridge between electrical and mechanical oscillation. Carbon powder exhibits thermal-conductive characteristics that interact with the charged ferro-ceramic particles converting their energy into heat that’s conducted away and released from the surface of the connector body! These carefully chosen and tested “active” materials mechanically and electrically damp the connector and receptacle as they “interconvert” thermal, mechanical, and electrical energy for the finest Furutech Pure Transmission signal imaginable.SPECIFICATIONS•α (Alpha) Pure copper Rhodium plated Conductor•Nylon/fiberglass body incorporating nano sized ceramic particles for absorption of vibration resonance.•Multi layered nonmagnetic stainless steel and carbon fiber housing and incorporating acetal copolymer. The best of dampingand insulation materials for improvements in frequency extension and tonal quality..•Specified for cable diameters from 6mm to 20mm•Dimensions: Body length 56.6mm x 40.5mm diameter x 93mm overall length•Metal cable clamp for improved grip and reduction of mechanically and electrically induced distortion.

Adapter cable to transform the mini XLR connector of PRODIPE series 21 micro instruments into connector (TA4F) for UHF SHURE ® system.Mini XLR male / TA4F female cable adapter to transform the Prodipe 21 Serie instruments mics mini connector XLR into connector (TA4F) for system UHF SHURE ®.

High quality Achromatic Z 4mm connector. Grub screw fixing.  Atlas is first and foremost an engineering company, so in designing our products, we not only listen very carefully, we test, measure and test again.

This small accessory allows to 2 IBus together with one remote control. Simplicity and ergonomy.

4N Oxygen- free copper ultimate conductivity and corrosion resistance. 5N Platinum pure silver minimal skin effect and impeccable audio signal transmission. RoHS compliant super-soft polymer for protection. Making it a multiple channels shielded cable. Braided for low-resistance path to ground. iFi’s own smooth surface connector and copper edge cut in a sharp angle to protect the 4.4 socket and extend lifetime. 1mm raised lip for precise connection. iFi connector aluminium alloy pins and PVC. Minimum resistance, flawless balance.

The WireWorld Banana plugs are made from copper alloy plated with either gold over silver or a very thick layer of silver, which they call ‘silver-clad’, to provide lower loss and cleaner sound than the common gold over nickel, ‘costume jewellery' plating used by most competitors. Specification: Sold in 1 pair, 1 Black & 1 Red Screwloc termination provides secure cable connection Copper Alloy plated with Gold Colour coded and insulated barrels ensure correct phasing and prevent amplifier damage

Uni-Term Interchangeable Termination System Speakers and components may come and go, but your favorite cables should be able to move with your ever changing system — hassle free.   Interchangeable spades and bananas in Silver-clad OFC or Silver+Gold plated OFC, make it easy to change connectors to suit your evolving needs. Convenient, fast and well-constructed with premium materials.   All Wireworld speaker cables come standard with Uni-Term connectors except Horizon.

Uni-Term Interchangeable Termination System Speakers and components may come and go, but your favorite cables should be able to move with your ever changing system — hassle free.   Interchangeable spades and bananas in Silver-clad OFC or Silver+Gold plated OFC, make it easy to change connectors to suit your evolving needs. Convenient, fast and well-constructed with premium materials.   All Wireworld speaker cables come standard with Uni-Term connectors except Horizon.

Our proprietary, low-mass, non-magnetic aluminium alloy Z-plug. Crimp or Grub Screw Z Plug, 4mm connector.

Connecting to your Android device with a cable should provide a decent connection. But what if it could be even better?  iFi’s audiophile grade OTG cables provide a super stable connection that supplies superior sound. On-the-go iFi understand the need for quality in every single component of your system. On-the-go (OTG) cables should be no exception. If fact, these actually need extra care and attention. Their very name suggests they will suffer more wear and tear than if they were sat at home! Simply the best OTG cables go between your phone and your DAC. We produce both the USB C and the micro version. They transfer the digital signal from your phone into your DAC. This connection must be stable. That’s why we use a USB 3.0 ‘A’ female connector. It is proven to be a much more mechanically reliable connection. We believe you guys deserve the best, even in the small stuff. Superior signal We also make our cables from top-notch materials. They are constructed from pure OFHC continuous cast copper – an excellent conductor – to deliver a superior, clean signal from your phone to your DAC. This, is turn, delivers the best sound to you to keep you and your music on-the-go, go, go! Perfect for use with Android phones. Our OTG cables extract a digital signal with ease. We offer both micro USB and USB C options. The USB C version is 3.0 standard. The USB 3.0 ‘A’ female connector provides a much more mechanically reliable connection, a factor that not many manufacturers take into account. This fits directly into a flat Type A USB port of the micro or nano iDSD Black Label and ensures a strong and steady audio connection. Our audiophile grade OTG cables are constructed from pure OFHC continuous cast copper, which conducts clean sound between your Android and DAC. And it’s not just the insides that get the iFi treatment. The cables are not only sonically superior but also super smart looking with a sexy ceramic finish to add that touch of class.

Bespeco SLYMSJ180 Silos Series 3.5 mm TRS to Dual 1/4 inch TS Stereo Breakout Cable FEATURES Packaging : Blister Cable Type : Shielded Cable Length : 3 m Cables Colors : Black / Orange Connectors : Jack Stereo - 2 x Jack Mono

Bespeco SLYMSJ180 Silos Series 3.5 mm TRS to Dual 1/4 inch TS Stereo Breakout Cable FEATURES Packaging : Blister Cable Type : Shielded Cable Length : 1.80 mt Cables Colors : Black / Orange Connectors : Jack Stereo - 2 x Jack Mono

The DragonTail USB adaptor activates USB Host Mode on most Android devices, allowing the devices to transmit USB digital audio to an outboard digital-to-analog converter (DAC).Using DragonTail to connect to an external USB DAC, such as an AudioQuest DragonFly, will provide greatly improved audio performance. SEMI-SOLID 5% SILVER CONDUCTORS CARBON-BASED NOISE-DISSIPATION SYSTEM MINIMIZES RF INTERFERENCE HARD-CELL FOAM INSULATION ENSURES CRITICAL GEOMETRY STABILITY ALL METAL DIRECTION-CONTROLLED FOR REDUCED RF NOISE

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Super Slim 3.5mm Jacks Allow usage with any generation iPhone,iPod, iMac 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

Added flexibility for when a headphone (3.5mm) output requires a flexible extension of 6 in. to a pair of female RCA connectors, allowing for the use of a pre-existing set of RCA interconnects. Male stereo 3.5 mm. to 2 x Female RCAMetal: Solid PSC+Length: 15 cm. (6 in.) SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS Solid conductors prevent both electrical and magnetic interaction strand-to-strand interaction, major sources of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the fields within a conductor, and for the magnetic fields that extend outside the conductor. The astonishingly smooth and pure surface of all AudioQuests’s Perfect-Surface metals nearly eliminates harshness and greatly increases clarity compared to lesser materials. Extremely high-purity Perfect-Surface Copper+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.

DIY SCREW-ON SPEAKER CONNECTORS 4 PCS Versatile and easy-to-assemble DIY gold plated connectors. They offer high quality contact over long periods of intensive use and are very effective in keeping oxidation away. 24 carat gold plated, screw-on, solderless connectors  Available in packs of four angled spades (fork) or banana plugs with red or blue rings for polarity identification  Only suitable for multi-strand loudspeaker cable and wire types. Minimum values: AWG 12 (Ø2 mm), for the bare conductor, and Ø 6.5 mm for jacket diameter    The banana and the angled fork spade screw-on terminals are WBT binding post fitting. Both offer excellent mating properties and minimal contact resistance.  The high pressure clamping ensures low loss electrical connection and maximum signal transfer  Spades terminal (standard Ø4 mm pin)  Angled fork spade terminal fits studs from Ø 6.0 mm to Ø 8.5 mm.  Easy assembly instructions (4 steps):  Strip off 14mm of the multi-strand cable/wire jacket Insert the stripped end through the screw-on collar Fan out the strands and evenly fold them encircling the collar Insert the banana pin/spade blade and screw-on to the collar

The VC1 is a 3m (10') 3.5 mm stereo audio extension cable, featuring two core shielding and a gold plated jack and socket. It is ideal for use to connect a RØDE VideoMic, Stereo VideoMic or VideoMic Pro when the microphone is mounted on a boompole, or away from the camera or recorder. The VC1 can also be used as a high quality headphone extension cable.Specifications:Weight: 52.00gDimensions: 3000.00mmH x 3.00mmW x 3.00mmDWarranty: 1 year

Jack Male Stereo - to - 2x Jack Male Mono - 3 meter

Jack Male Stereo - to - 2x Jack Male Mono - 1.5 meter