Connectors

Furutech FT-SWS-D NCF (R)Dual Schuko Main Socket Rhodium Plated Copper NCFThe Furutech FT-SWS-D NCF (R) is a dual wall socket with Schuko high-end connectors. Its high design quality allows it to provide an undegraded AC electrical signal that greatly contributes to the audio reproduction quality of your system.The contacts of these sockets are made of pure Copper with Rhodium plating, ensuring excellent signal conductivity. In addition, these contacts are processed Alpha (α). The facade of the socket is covered with a magnificent Carbon and Fiberglass cladding.Nano Crystal² Formula (NCF)Integrated in a selection of Furutech products, NCF is based on a special crystalline material with two active properties. First, the NCF generates negative ions that eliminate static electricity. Second, it converts thermal energy into infrared. Furutech combines this material with ceramic nanoparticles and carbon powder for their piezoelectric damping properties. Furutech thus obtains the optimal electrical and mechanical damping material.

This FURUTECH FI-50 (R) connector is dedicated to the realization of high-end mains cable. Its conductors in Pure Copper plated Rhodium "Furutech Alpha α" make it a highly audiophile connector.

Speakon 2 πόλων, για καλώδια διατομής 6-12mm

4 pole speakON cable connector, screw terminal assembly, chuck type strain relief for cable diameters 6 to 12 mmspeakON connectors are the industry-standard for loudspeaker connections. This product series offers extremely reliable and robust cable connectors with a proven twist lock system. speakON cable connectors feature solid contacts with screw-type terminals including a stranded wire protection

Καρφί θηλυκό stereo προεκτάσεως

Hicon HI-J63MA05 Αρσενικό Γωνιακό Βύσμα Καρφί 6,3mm TS 2 Πόλων για Καλώδιο - Μαύρο

The e-TP80 is a sophisticated, luxuriously made power distributor that eliminates many common problems found with audio and video components caused by massively contaminated electrical power.The AC waveform becomes severely distorted by ground noise, voltage spikes and sags, high frequency power supply noise from other components in your own system,plus radiated high frequency digital noise from processors and digital interconnects.There are also distortion products at the top and bottom of the AC waveform created by switch-mode power supplies in electronic devices on the same circuit. Additionally, you’re never alone; your residential AC mains supply is shared with other apartments,homes, and businesses on the same utility transformer. That’s why many audio and video enthusiasts notice their systems are more enjoyable late at night or on weekends!The beautifully crafted special grade aluminum chassis effectively shields against another common problem, RFI (Radio Frequency Interference), and a layer of Formula GC-303 blocks EMI (Electro Magnetic Interference).Internal wiring is FURUTECH μ-14 wire（14 AWG） that guarantees low resistance. Furutech Hyper Quality Audio Grade Receptacles are wired to the IEC AC input of the e-TP80. Receptacles feature 24K gold-plated phosphor bronze, non-magnetic conductors for stable, long lasting, optimized power transfer. Formula GC-303GC-303 is a special material Furutech bonds to the interior bottom-plate of the chassis that absorbs EMI(Electromagnetic Interference) generated by the internal fittings of the unit. Furutech’s Two-Stage Cryogenic and Demagnetizing Alpha ProcessUsing cutting-edge technology and materials, Furutech developed a low-temperature two-stage process that significantly improves every facet of audio and video performance. The treatment begins during the manufacturing process with a deep, conditioning cryogenic freeze of all metal parts. Using high-end refrigerants -- liquid N2 or He -- Furutech achieves temperatures of between -196 to -250°C. The treated parts actually change their molecular structure at these extremes of temperature relieving internal stress. The molecules bond together more tightly and the overall structure becomes more stable. This improves electrical conductivity and so power and signal transfer.Step two in the Alpha Process exposes these same parts to the patented Ring Demagnetization treatment. Ordinary high power magnets used for this purpose often increase magnetic effects; they leave some areas more magnetized than others. This patented process uses controlled attenuation to completely eliminate magnetization for immediately more vivid and colorful improvements. Ring Demagnetization further enhances conductivity of all treated materials.ALL metallic parts used in Furutech products go through the Alpha Process treatment to keep all connectors, conductors, and metal parts in a perfect stress-free, stable and highly conductive state.The Final ResultThe 2-Step Alpha Cryogenic and Demagnetizing Process works in tandem with other designed-in features to create the most optimized AC power transfer possible. Furutech’s scientific outlook, total awareness and devotion to detail results in a greater sense of power, dynamics, and resolution, with cleaner, blacker backgrounds and a larger, more stable soundstage, vivid tonal colors and deeper extension at both ends of the frequency range. The e-TP80 will allow the delicacy, refinement and nuance of a performance through, along with micro- and macro-dynamics that will leave you breathlessly engaged. Displays of all types will exhibit greater, sharper resolution with less ghosting, color shift, “snow”, or vertical and horizontal lines.

3-pin αρσενικό προεκτάσεως (Συσκ.50τεμ)

Speaκon προεκτάσεως 4 επαφών (Συσκ.25τεμ)

Furutech’s Pure Transmission FI-50 Piezo Ceramic series connector bodies and housings feature several breakthrough construction techniques. A multilayer nonmagnetic stainless steel and carbon fiber shell incorporates a special damping and insulating acetal copolymer. Furutech settled on stainless and carbon fiber for the outer housing after extensive listening sessions with Japanese industry figures and audiophiles. The body of the connectors combines two “active” materials: Nano-sized ceramic particles and powdered carbon. (Only nano-sized ceramic particles effectively couples with carbon powder.) Nylon and fiberglass are incorporated as well forming an extremely effective, well damped, mechanically and electrically nonresonant connector body. That’s correct, they’re electrically damped as well. Piezoelectric effects are the key. Furutech’s breakthrough in design and materials is based on employing nano-sized polycrystalline ferroelectric ceramic particles exhibiting electro-generative properties; mechanical pressure creates an electrical charge forming a bridge between electrical and mechanical oscillation. Carbon powder exhibits thermal-conductive characteristics that interact with the charged ferro-ceramic particles converting their energy into heat that’s conducted away and released from the surface of the connector body! These carefully chosen and tested “active” materials mechanically and electrically damp the connector and receptacle as they “interconvert” thermal, mechanical, and electrical energy for the finest Furutech Pure Transmission signal imaginable.SPECIFICATIONS•α (Alpha) Pure copper Rhodium plated Conductor•Nylon/fiberglass body incorporating nano sized ceramic particles for absorption of vibration resonance.•Multi layered nonmagnetic stainless steel and carbon fiber housing and incorporating acetal copolymer. The best of dampingand insulation materials for improvements in frequency extension and tonal quality..•Specified for cable diameters from 6mm to 20mm•Dimensions: Body length 56.6mm x 40.5mm diameter x 93mm overall length•Metal cable clamp for improved grip and reduction of mechanically and electrically induced distortion.

High quality Achromatic Z 4mm connector. Grub screw fixing.  Atlas is first and foremost an engineering company, so in designing our products, we not only listen very carefully, we test, measure and test again.

The WireWorld Banana plugs are made from copper alloy plated with either gold over silver or a very thick layer of silver, which they call ‘silver-clad’, to provide lower loss and cleaner sound than the common gold over nickel, ‘costume jewellery' plating used by most competitors. Specification: Sold in 1 pair, 1 Black & 1 Red Screwloc termination provides secure cable connection Copper Alloy plated with Gold Colour coded and insulated barrels ensure correct phasing and prevent amplifier damage

Uni-Term Interchangeable Termination System Speakers and components may come and go, but your favorite cables should be able to move with your ever changing system — hassle free.   Interchangeable spades and bananas in Silver-clad OFC or Silver+Gold plated OFC, make it easy to change connectors to suit your evolving needs. Convenient, fast and well-constructed with premium materials.   All Wireworld speaker cables come standard with Uni-Term connectors except Horizon.

Uni-Term Interchangeable Termination System Speakers and components may come and go, but your favorite cables should be able to move with your ever changing system — hassle free.   Interchangeable spades and bananas in Silver-clad OFC or Silver+Gold plated OFC, make it easy to change connectors to suit your evolving needs. Convenient, fast and well-constructed with premium materials.   All Wireworld speaker cables come standard with Uni-Term connectors except Horizon.

Our proprietary, low-mass, non-magnetic aluminium alloy Z-plug. Crimp or Grub Screw Z Plug, 4mm connector.

DIY SCREW-ON SPEAKER CONNECTORS 4 PCS Versatile and easy-to-assemble DIY gold plated connectors. They offer high quality contact over long periods of intensive use and are very effective in keeping oxidation away. 24 carat gold plated, screw-on, solderless connectors  Available in packs of four angled spades (fork) or banana plugs with red or blue rings for polarity identification  Only suitable for multi-strand loudspeaker cable and wire types. Minimum values: AWG 12 (Ø2 mm), for the bare conductor, and Ø 6.5 mm for jacket diameter    The banana and the angled fork spade screw-on terminals are WBT binding post fitting. Both offer excellent mating properties and minimal contact resistance.  The high pressure clamping ensures low loss electrical connection and maximum signal transfer  Spades terminal (standard Ø4 mm pin)  Angled fork spade terminal fits studs from Ø 6.0 mm to Ø 8.5 mm.  Easy assembly instructions (4 steps):  Strip off 14mm of the multi-strand cable/wire jacket Insert the stripped end through the screw-on collar Fan out the strands and evenly fold them encircling the collar Insert the banana pin/spade blade and screw-on to the collar

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88 mm jack pitch).The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.Features:Extra slim 1/4" plug for highest packing densityRobust diecast shell in stylish designProven chuck type strain relief for reliable cable retentionSleek design for best handling conveniencePrecision machined one-piece contacts - avoid hook up of tip contact

Neutrik NL4 MMX Speakon-Speakon Barrel adapter, 4-pole, to connect two speakON cables, suitable for 2 and 4 Pol Speakon connectors

New versionFor cable assembly4-Pin with lockCable diameter 6 - 14 mmMax. rated current 50 AMax. conductor area 6 mm²

2 conductor shielded RCA straight plug, solid pin cable up to 0.203" (5.16mm) diameter, solder cup on center. Long handle & cable clamp, Black Handle, Gold Plug.

3.5MM (1/8" mini) Stereo Plug, gold finger, black handle, 0.175" cable diameter.

Right Angle Cable Mount RCA Plug, Gold Pin / Black Body.

3.5MM (1/8" mini) Right Angle Stereo Plug, solder terminals, black shielded, gold-plated finger.

Connector pair RCA/Cinch female.

Connector pair RCA/Cinch male.

3-pole cable connector, female, rear insert. Unique cage type female contact with 7 independent contact springs. New improved chuck type strain relief. Additional ground spring contacts. (black)

3-pole cable connector, male, rear insert. New improved chuck type strain relief. Improved locking area. Black shell/silver contacts.

2 pole 1/4" professional right-angle phone plug, gold contacts, black shell.Features:All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protectionExtra slim 1/4" plug for highest packing densityRobust diecast shell in stylish designProven chuck type strain relief for reliable cable retentionSleek design for best handling conveniencePrecision machined one-piece contacts - avoid hook up of tip contact

1/4" professional right-angle phone plug, 2 pole, nickel contacts, nickel shell.Features:All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protectionExtra slim 1/4" plug for highest packing densityRobust diecast shell in stylish designImproved chuck type strain relief for reliable cable retention Sleek design for best handling convenience

Neutrik NYS228, a stereo 3-Pole 1/4" Phone Plug.Features:Long Die-Cast HandleNickel-Shell PlatingNickel-Plated Contacts

3-pole cable connector, male, rear insert. New improved chuck type strain relief. Improved locking area. (gold-plated/black shell) .

3 pole right angle female cable connector, nickel housing, silver contactsFeatures: Extra slim right-angle connector5 selectable cable outlet positionsUnique cage design of female contact for low contact resistance and high integrityFemale contact incorporates a solder barrier to prevent solder running into the contact mating areaFemale connector with improved solid metal latch which is larger and easier to handleAdditional ground spring contacts for better shell ground continuityImproved chuck type strain relief provides higher pull-out force and makes assembly easier and fasterBoot with polyurethane gland gives high protection to cable bending stressesColoured rings and boots available for coding or identificationSleek and ergonomic design - valuable and handyBranded with unique hologram - guarantees genuine and authentic Neutrik product

2 pole right-angle 1/4" professional phone plug, nickel contacts, black shell.Features:All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protectionExtra slim 1/4" plug for highest packing densityRobust diecast shell in stylish designProven chuck type strain relief for reliable cable retentionSleek design for best handling conveniencePrecision machined one-piece contacts - avoid hook up of tip contact

2 pole 1/4" professional right-angle phone plug, gold contacts, black shell.Features:All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protectionExtra slim 1/4" plug for highest packing densityRobust diecast shell in stylish designProven chuck type strain relief for reliable cable retentionSleek design for best handling conveniencePrecision machined one-piece contacts - avoid hook up of tip contact

3-pole cable connector, female, rear insert. Unique cage type female contact with 7 independent contact springs. New improved chuck type strain relief. Additional ground spring contacts. (gold-plated).

DIY SCREW-ON SPEAKER CONNECTORS 4 PCSVersatile and easy-to-assemble DIY gold plated connectors. They offer high quality contact over long periods of intensive use and are very effective in keeping oxidation away.24 carat gold plated, screw-on, solderless connectors Available in packs of four angled spades (fork) or banana plugs with red or blue rings for polarity identification Only suitable for multi-strand loudspeaker cable and wire types. Minimum values: AWG 12 (Ø2 mm), for the bare conductor, and Ø 6.5 mm for jacket diameter   The banana and the angled fork spade screw-on terminals are WBT binding post fitting. Both offer excellent mating properties and minimal contact resistance. The high pressure clamping ensures low loss electrical connection and maximum signal transfer Banana terminal (standard Ø4 mm pin) Angled fork spade terminal fits studs from Ø 6.0 mm to Ø 8.5 mm. Easy assembly instructions (4 steps): Strip off 14mm of the multi-strand cable/wire jacketInsert the stripped end through the screw-on collarFan out the strands and evenly fold them encircling the collarInsert the banana pin/spade blade and screw-on to the collar

3 pole female cable connector, black metal housingFeatures:Built in noiseless ON-OFF switch short-circuiting contacts 2 + 3For use on a microphone without switchRugged zinc diecast shell, long lasting and durableRugged metal bootChuck type strain relief system for secure clamping of cablesBoot with rubber gland gives high protection against bending stresses

4 pole cable connector, chuck type strain relief, dark grey bushing,Features:Current rating 40 A rms continuousUp to 50 A audio signal, duty cycle 50%Only 3 parts, easy to assembleHigh impact materials - long-lasting and reliableEasy and extremely precise locking system "Quick Lock"Improved grip on latch1 piece strain relief, chuck for 7 to 14.5 mm cable O.D.Color coding possibleImproved screw-type termination for highest pull-out forceIntegrated design guarantees "Made by Neutrik®" 

3 pole 1/4" professional phone plug, Nickel housing, Nickel contacts.Features:Rugged diecast metal shellChuck type strain relief for optimum cable protectionPrecision machined one-piece contacts - avoid hook up of tip contactMeets all prevailing standards

3 pole 1/4" professional phone plug, nickel contacts, black shell.Features:Extra slim 1/4" plug for highest packing densityRobust diecast shell in stylish designProven chuck type strain relief for reliable cable retentionSleek design for best handling conveniencePrecision machined one-piece contacts - avoid hook up of tip contact

1/4" professional right-angle phone plug, 2 pole, nickel contacts, nickel shell.Features:All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protectionExtra slim 1/4" plug for highest packing densityRobust diecast shell in stylish designProven chuck type strain relief for reliable cable retentionSleek design for best handling conveniencePrecision machined one-piece contacts - avoid hook up of tip contact  

3 pole 3.5 mm audio plug, solder termination, chuck type strain relief, bushing, black housing, gold contacts,Features:All metal housing - robust and reliableChuck type cable clamp and rubber gland - excellent cable protectionSlim design - space saving

3-pole cable connector, female, rear insert. Unique cage type female contact with 7 independent contact springs. New improved chuck type strain relief. Additional ground spring contacts. Silver contacts/ VI shell. .

3-pole cable connector, male, rear insert. New improved chuck type strain relief. Improved locking area. Silver contacts/VI shell.