Adapters

The MuxLab Digital Audio Extender Kit (500086) allows one (1) Digital Coax (S/PDIF) or Digital Optical (TOSLINK) source to be connected to a Digital Audio Receiver that supports either Digital Coax (S/PDIF), or Digital Optical ( TOSLINK) inputs. The audio transmission signal can be distributed up to 150m point-to-point with a Cat5e/6.

Stereo Audio Hi-Fi Balun from RCA plug to Cat5 plug. High quality audio signal transfer (20Hz - 20kHz) via UTP (Cat5) cable. Used in pairs. Signal transmission up to 990m.

Balun για μεταφορά stereo αναλογικού σήματος ήχου από βύσμα (RCA) μέσω ενός καλωδίου UTP (Cat5/Cat6). Για μεταφορά σήματος line. Δυνατότητα λειτουργίας σε συνδυασμό με τα baluns 500019, 500001, 500012, 500017, και 500200. Μεταφορά σήματος ήχου έως 1.5Km.

Adapter cable to transform the mini XLR connector of PRODIPE series 21 micro instruments into connector (TA4F) for UHF SHURE ® system.Mini XLR male / TA4F female cable adapter to transform the Prodipe 21 Serie instruments mics mini connector XLR into connector (TA4F) for system UHF SHURE ®.

Connecting to your Android device with a cable should provide a decent connection. But what if it could be even better?  iFi’s audiophile grade OTG cables provide a super stable connection that supplies superior sound. On-the-go iFi understand the need for quality in every single component of your system. On-the-go (OTG) cables should be no exception. If fact, these actually need extra care and attention. Their very name suggests they will suffer more wear and tear than if they were sat at home! Simply the best OTG cables go between your phone and your DAC. We produce both the USB C and the micro version. They transfer the digital signal from your phone into your DAC. This connection must be stable. That’s why we use a USB 3.0 ‘A’ female connector. It is proven to be a much more mechanically reliable connection. We believe you guys deserve the best, even in the small stuff. Superior signal We also make our cables from top-notch materials. They are constructed from pure OFHC continuous cast copper – an excellent conductor – to deliver a superior, clean signal from your phone to your DAC. This, is turn, delivers the best sound to you to keep you and your music on-the-go, go, go! Perfect for use with Android phones. Our OTG cables extract a digital signal with ease. We offer both micro USB and USB C options. The USB C version is 3.0 standard. The USB 3.0 ‘A’ female connector provides a much more mechanically reliable connection, a factor that not many manufacturers take into account. This fits directly into a flat Type A USB port of the micro or nano iDSD Black Label and ensures a strong and steady audio connection. Our audiophile grade OTG cables are constructed from pure OFHC continuous cast copper, which conducts clean sound between your Android and DAC. And it’s not just the insides that get the iFi treatment. The cables are not only sonically superior but also super smart looking with a sexy ceramic finish to add that touch of class.

The DragonTail USB adaptor activates USB Host Mode on most Android devices, allowing the devices to transmit USB digital audio to an outboard digital-to-analog converter (DAC).Using DragonTail to connect to an external USB DAC, such as an AudioQuest DragonFly, will provide greatly improved audio performance. SEMI-SOLID 5% SILVER CONDUCTORS CARBON-BASED NOISE-DISSIPATION SYSTEM MINIMIZES RF INTERFERENCE HARD-CELL FOAM INSULATION ENSURES CRITICAL GEOMETRY STABILITY ALL METAL DIRECTION-CONTROLLED FOR REDUCED RF NOISE

Added flexibility for when a headphone (3.5mm) output requires a flexible extension of 6 in. to a pair of female RCA connectors, allowing for the use of a pre-existing set of RCA interconnects. Male stereo 3.5 mm. to 2 x Female RCAMetal: Solid PSC+Length: 15 cm. (6 in.) SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS Solid conductors prevent both electrical and magnetic interaction strand-to-strand interaction, major sources of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the fields within a conductor, and for the magnetic fields that extend outside the conductor. The astonishingly smooth and pure surface of all AudioQuests’s Perfect-Surface metals nearly eliminates harshness and greatly increases clarity compared to lesser materials. Extremely high-purity Perfect-Surface Copper+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.

Hicon HI-JS6JS3-MF Adapter from Female 3,5mm Mini TRS to Male 6,3mm TRS - Chrome

Low cost solution for unbalanced/balanced line conversion and passive DI applications, where no earth or gain switching is required.Features:The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applicationsRugged aluminium extrusion housing for best reliabilitySpecifications:Audio transformer 1:1Impedance ratio: 200:200Source/load impedance in Ohm: 200/2k, (600/10k)Max. Input level (@ 50 Hz, 1% THD): -3 dBu 

Low cost solution for unbalanced/balanced line conversion and passive DI applications, where no earth or gain switching is required.Features:The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applicationsRugged aluminium extrusion housing for best reliabilityColour coding on all RCA typesSpecifications:Audio transformer 1:1Impedance ratio: 200:200Source/load impedance in Ohm: 200/2k, (600/10k)Max. Input level (@ 50 Hz, 1% THD): -3 dBu 

Adapter XLR female to RCA/Cinch male

Adapter XLR male to 6.3 mm Jack male.

Adapter XLR male to 6.3 mm Jack male balanced.

Adapter XLR female to 6.3 mm Jack male.

Adapter XLR female to 6.3 mm Jack male balanced.

Adapter RCA/Cinch female to 6.3 mm Jack male.

Adaptor jack 3.5 stereo female – jack 6.3 stereo male

Adaptor 2 RCA θηλυκά - jack 3.5 stereo αρσενικό.

Shure A15HP Passive High Pass Filter (100Hz/12dB) Plug Adaptor, XLR in/out.

 The Shure A85F is a low- to high-impedance microphone-matching transformer that provides 24 dB of signal increase gain. It has balanced female XLR and unbalanced high impedance male 1/4'' phone plug connectors, and may be used in reverse. The A85F is typically used to connect a balanced low-impedance microphone output to an unbalanced high impedance input on a mixer or recorder. NOTE: Not for connection to the balanced line-level output of a mixer.

Adaptor 2 jack 6.3 stereo θηλυκό - jack 6.3 stereo αρσενικό.