. go to top icon

Balanced Cables

Filters
38  Products

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

32 €
12 Interest Free Instalments 2,67€ / month
In Stock

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

36 €
12 Interest Free Instalments 3,00€ / month
In Stock

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

78 €
12 Interest Free Instalments 6,50€ / month
Upon Order

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

59 €
12 Interest Free Instalments 4,92€ / month
Upon Order

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

54 €
12 Interest Free Instalments 4,50€ / month
Upon Order

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

49 €
12 Interest Free Instalments 4,08€ / month
Upon Order

Balanced male jack to female XLRCable cross-section: 2 x 0.20 mm²With Neutrik (Rean) connectorsGold-plated contactsCasing: black metalHand-solderedLength: 3 m

10 ,6 €
36 Instalments 0,37€ / month
Upon Order

Μicrophone Cable 1XLR3F->1J2P63M, 2m

10 ,89 €
36 Instalments 0,38€ / month
In Stock

Καλώδιο Jack male stereo - σε - XLR male. 1.5 μέτρα.

11 ,5 €
36 Instalments 0,40€ / month
In Stock

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

45 €
12 Interest Free Instalments 3,75€ / month
In Stock

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

41 €
12 Interest Free Instalments 3,42€ / month
In Stock

Pro Series - Studio & Live TRS Cable 20' (6.1 meters)

50 €
12 Interest Free Instalments 4,17€ / month
In Stock

Pro Series - Studio & Live TRS Cable 510 (3.0 meters)

39 €
12 Interest Free Instalments 3,25€ / month
In Stock

Pro Series - Studio & Live TRS Cable 5' (1.5 meters)

35 €
12 Interest Free Instalments 2,92€ / month
Upon Order

Pro Series - Studio & Live TRS Cable 3' (0.9 meters)

27 €
12 Interest Free Instalments 2,25€ / month
In Stock

Pro Series - Studio & Live XLR Male to TRS Male 6' (1.8 meters)

27 €
12 Interest Free Instalments 2,25€ / month
In Stock

Pro Series - Studio & Live XLR Male to TRS Male 3' (0.9 meters)

24 €
12 Interest Free Instalments 2,00€ / month
In Stock

Cable for electronic devices - Ø 6,3 mm stereo jack - Ø 3,5 mm stereo jack

6 ,09 €
36 Instalments 0,21€ / month
In Stock

Cable for electronic devices - Ø 6,3 mm stereo jack - Ø 3,5 mm stereo jack -3m

7 ,43 €
36 Instalments 0,26€ / month
In Stock

Cable line XLR male-Line jack balanced 3 meters

8 €
36 Instalments 0,28€ / month
In Stock

d+ series bring the highest quality and a cool designed in your sound system such as DJ gears, audio interface, speaker, mixer, effector, synthesizer and all sound gears.About the product planning for the d+ series, we contemplated the best combination of materials and the structure for today’s music and situations.You might already have seen d+ class B series somewhere. That’s why they always have a desire to improve the sound quality and the cable’s transmission influences the total sounds. Many professionals are using the d+ series and you can easily get the goodness on your sound system.Specifications:Structure: Flat (Inverted concentric structure) Conductor: 18AWG high purity oxygen-free copperInsulator: Polyolefin Exterior sheath: Flex PVC Housing: PBT + Glass FiberTerminal: RCA plug , 1 /4 inch phone plug , 1/4TRS plug , XLR plug (24K gold-plated bronze alloy coating )

37 ,76 €
36 Instalments 1,30€ / month
In Stock

d+ series bring the highest quality and a cool designed in your sound system such as DJ gears, audio interface, speaker, mixer, effector, synthesizer and all sound gears.About the product planning for the d+ series, we contemplated the best combination of materials and the structure for today’s music and situations.You might already have seen d+ class B series somewhere. That’s why they always have a desire to improve the sound quality and the cable’s transmission influences the total sounds. Many professionals are using the d+ series and you can easily get the goodness on your sound system.Specifications:Structure: Flat (Inverted concentric structure) Conductor: 18AWG high purity oxygen-free copperInsulator: Polyolefin Exterior sheath: Flex PVC Housing: PBT + Glass FiberTerminal: RCA plug , 1 /4 inch phone plug , 1/4TRS plug , XLR plug (24K gold-plated bronze alloy coating )

42 €
36 Instalments 1,45€ / month
In Stock

Cable Jack Stereo Male 6.3mm-XLR Male to Neutrik connectors and cable Cordial CMX222 with dimension 2.50m.

22 ,07 €
36 Instalments 0,76€ / month
Upon Order

Cable Jack Stereo Male 6.3mm-XLR Male to Neutrik connectors and cable Cordial CMX222 with dimension 5m.

25 ,67 €
36 Instalments 0,89€ / month
Upon Order

Cable Jack Stereo Male 6.3mm - Jack Stereo Male 6.3mm with Neutrik connectors and cable Cordial CMX222 with dimension 2.50m.

23 ,44 €
36 Instalments 0,81€ / month
Upon Order

d+ series bring the highest quality and a cool designed in your sound system such as DJ gears, audio interface, speaker, mixer, effector, synthesizer and all sound gears.About the product planning for the d+ series, we contemplated the best combination of materials and the structure for today’s music and situations.You might already have seen d+ class B series somewhere. That’s why they always have a desire to improve the sound quality and the cable’s transmission influences the total sounds. Many professionals are using the d+ series and you can easily get the goodness on your sound system.Specifications:Structure: Flat (Inverted concentric structure) Conductor: 18AWG high purity oxygen-free copperInsulator: Polyolefin Exterior sheath: Flex PVC Housing: PBT + Glass FiberTerminal: RCA plug , 1 /4 inch phone plug , 1/4TRS plug , XLR plug (24K gold-plated bronze alloy coating )

37 ,76 €
36 Instalments 1,30€ / month
In Stock

XLR male to 6.3 mm Jack male stereo.

14 €
36 Instalments 0,48€ / month
In Stock

Μicrophone Cable 1XLR3M->1J3P63M 0.6m.

8 ,69 €
36 Instalments 0,30€ / month
In Stock

Μicrophone Cable 1XLR3M->1J3P63M 5m.

15 €
36 Instalments 0,52€ / month
In Stock

Cable 1XLR3M->1J3P63M 1m.

12 €
36 Instalments 0,41€ / month
In Stock

1XLR3M->J3P63M 2m PROEL.

15 ,84 €
36 Instalments 0,55€ / month
In Stock

Μicrophone Cable 1XLR3M->1J3P63M 3m.

11 ,99 €
36 Instalments 0,41€ / month
In Stock

XLR male to JACK 6.3 mm stereo male 5m.

14 €
36 Instalments 0,48€ / month
In Stock

Jack male Stereo - to - Jack male Stereo 5 meter

11 ,1 €
36 Instalments 0,38€ / month
Upon Order

2x XLR Male - to -  2x Jack Male - 2 meter

14 €
36 Instalments 0,48€ / month
Upon Order

Jack male Stereo - to- Jack male Stereo 3 meter

10 ,9 €
36 Instalments 0,38€ / month
In Stock

19 ,8 €
36 Instalments 0,68€ / month
In Stock

16 ,94 €
36 Instalments 0,58€ / month
In Stock