Multi Cables

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Top notch 0.5m 8 analog XLR outputs snake cable (channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped), with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 12 pF/m (much lower than the vast majority of single channel microphone - line cables!), while the capacitance value between each signal conductor and shield lies at 130 pF/m.The connectors used consist of Neutrik gold plated Male XLRs, Amphenol DSub-25 plug with gold plated contacts, and a metal DSub-25 Hood. 

Top notch 5m AES/EBU snake with 8 input/output channels in female/male XLR connectors (channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped).This cable features excellent shielding combined with very low capacitance values.The connectors used consist of Neutrik gold plated female/male XLRs, Amphenol DSub-25 plug with gold plated contacts, and an Amphenol metal DSub-25 Hood. 

Top notch 0.5m 8 analog XLR inputs snake cable (channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped), with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 12 pF/m (much lower than the vast majority of single channel microphone - line cables!), while the capacitance value between each signal conductor and shield lies at 130 pF/m.The connectors used consist of Neutrik gold plated Female XLRs, Amphenol DSub-25 plug with gold plated contacts, and a metal DSub-25 Hood. 

Top notch 0.5m 8 analog Jack inputs snake cable (channel numbers are printed and underlined on each core jacket to ensure correct identification, regardless of which end is stripped), with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 12 pF/m (much lower than the vast majority of single channel microphone - line cables!), while the capacitance value between each signal conductor and shield lies at 130 pF/m.The connectors used consist of Neutrik Female 1/4" Jacks, Amphenol DSub-25 plug with gold plated contacts, and a metal DSub-25 Hood.  

Avid offers an array of quality cabling options to ensure the fidelity of audio signals as they travel between the I/O components of your Pro Tools system. Uniquely designed for Avid gear, DigiSnakes are custom colored and labeled, feature a lifetime warranty, and are comprised of 110 ohm "digital grade" cable to accommodate either digital or analog signals. DigiSnakes make connecting your gear a quick, easy process, freeing you to spend your valuable time on your audio projects rather than the wires they travel across.Features:DB25 to 8 balanced TRS connectors for audio input or outputAnalog or digital.Orange jackets on both ends with appropriate labeling.Product MH083; length: 12 feet.

Avid offers an array of quality cabling options to ensure the fidelity of audio signals as they travel between the I/O components of your Pro Tools system. Uniquely designed for Avid gear, DigiSnakes are custom colored and labeled, feature a lifetime warranty, and are comprised of 110 ohm "digital grade" cable to accommodate either digital or analog signals. DigiSnakes make connecting your gear a quick, easy process, freeing you to spend your valuable time on your audio projects rather than the wires they travel across.Features:DB25 to 8 XLR Male; Output snake.Analog or digital.Red jackets on both ends with appropriate labeling.Product MH081 Length: 12 feet.

Avid offers an array of quality cabling options to ensure the fidelity of audio signals as they travel between the I/O components of your Pro Tools system. Uniquely designed for Avid gear, DigiSnakes are custom colored and labeled, feature a lifetime warranty, and are comprised of 110 ohm "digital grade" cable to accommodate either digital or analog signals. DigiSnakes make connecting your gear a quick, easy process, freeing you to spend your valuable time on your audio projects rather than the wires they travel across.Features:DB25 to 4 XLR Male and 4 XLR Female.Below 192 KHz, AES/EBU carries 2 channels per line, so this snake transmits 8 out and 8 in via the 8 XLR connectors.At 192kHz sample rate, the 192 I/O is using dual wire transmission. This means the AES snake transmits 4 out and 4 in at 192 kHz. In this case, the connector labeled "output 1&2" is output 1, "output 3&4" is output 2, and so forth.The 4 XLRF wire jackets are yellow the 4 XLRM jackets are black, all with appropriate labeling.*Product MH080; Length: 12 feet.

Avid offers an array of quality cabling options to ensure the fidelity of audio signals as they travel between the I/O components of your Pro Tools system. Uniquely designed for Avid gear, DigiSnakes are custom colored and labeled, feature a lifetime warranty, and are comprised of 110 ohm "digital grade" cable to accommodate either digital or analog signals. DigiSnakes make connecting your gear a quick, easy process, freeing you to spend your valuable time on your audio projects rather than the wires they travel across. Typically used for communication between any two standard DB25-equipped devices (e.g., PRE out to 192 I/O analog in). Cannot be used for AES/EBU or TDIF digital dubbing. For TDIF dubbing, use the TDIF DigiSnake. For AES/EBU digital dubbing, use two AES/EBU DigiSnakes, connected end to end (XLR to XLR).Features:DB25 to DB25, standard wiring.Green jackets on both ends.Typically used for communication between any two standard DB25-equipped devices; For example, PRE out to 192 I/O analog inCannot be used for AES/EBU or TDIF digital dubbing. For TDIF dubbing, use the TDIF DigiSnake (below). For AES/EBU digital dubbing, use two AES/EBU DigiSnakes, connected end to end (XLR to XLR).Product MH085 Length: 25 feet.

Avid offers an array of quality cabling options to ensure the fidelity of audio signals as they travel between the I/O components of your Pro Tools system. Uniquely designed for Avid gear, DigiSnakes are custom colored and labeled, feature a lifetime warranty, and are comprised of 110 ohm "digital grade" cable to accommodate either digital or analog signals. DigiSnakes make connecting your gear a quick, easy process, freeing you to spend your valuable time on your audio projects rather than the wires they travel across. Typically used for communication between any two standard DB25-equipped devices (e.g., PRE out to 192 I/O analog in). Cannot be used for AES/EBU or TDIF digital dubbing. For TDIF dubbing, use the TDIF DigiSnake. For AES/EBU digital dubbing, use two AES/EBU DigiSnakes, connected end to end (XLR to XLR).Features:DB25 to DB25, standard wiring.White jackets on both ends.Typically used for communication between any two standard DB25-equipped devices; For example, PRE out to 192 I/O analog in.Cannot be used for AES/EBU or TDIF digital dubbing. For TDIF dubbing, use the TDIF DigiSnake (below). For AES/EBU digital dubbing, use two AES/EBU DigiSnakes, connected end to end (XLR to XLR).Product MH084 Length: 12 feet.

The C|24 DB25 Cable Kit includes all the cables you need to connect a C|24 control surface to any Pro Tools|HD system with a 192 I/O audio interface. This 13-cable kit includes the following cables:DB25–DB25 cable (4)Includes four 25-foot cables to connect:Pro Tools Input (Monitor section)Surround Input (Monitor section)Line Outputs 1–8 (mic/line/DI preamps)Line Outputs 9–16 (mic/line/DI preamps)DB25–XLR Male cable (1)Includes one 25-foot cable to connect:5.1 Control Room Out (Monitor section)DB25–XLR Female cable (2)Includes two 25-foot cables to connect:Mic Inputs 1–8 (preamps)Mic Inputs 9–16 (preamps)DB25–TRS cable (6)Includes six 25-foot cables to connect:Submixer Inputs 1–4 (line submixer)Submixer Inputs 5–8 (line submixer)Ext Stereo InputsCue OutputsLine/DI Inputs 1–8Line/DI Inputs 9–16

DigiLink cables are designed to connect an HD I/O peripheral (such as 192 I/O or 96 I/O) to an HD PCI card, or an HD I/O to another HD I/O, as two HD I/O's can be chained together (this makes for a single, clean DigiLink connection between multiple I/O's and the CPU). One 12 foot DigiLink cable is included with an HD core purchase (for connection of the I/O to the CPU), and one 1.5 foot cable is included with each HD I/O (for chaining multiple I/O units together). Purchased separately, longer DigiLink cables ( 25', 50' and 100') are useful for environments in which isolating machine noise-generating CPUs is an issue.

DigiLink cables are designed to connect an HD I/O peripheral (such as 192 I/O or 96 I/O) to an HD PCI card, or an HD I/O to another HD I/O, as two HD I/O's can be chained together (this makes for a single, clean DigiLink connection between multiple I/O's and the CPU). One 12 foot DigiLink cable is included with an HD core purchase (for connection of the I/O to the CPU), and one 1.5 foot cable is included with each HD I/O (for chaining multiple I/O units together). Purchased separately, longer DigiLink cables — 25', 50' and 100'* — are useful for environments in which isolating machine noise-generating CPUs is an issue.*DigiLink 100' does not support sample rates above 96 kHz.

DigiLink cables are designed to connect an HD I/O peripheral (such as 192 I/O or 96 I/O) to an HD PCI card, or an HD I/O to another HD I/O, as two HD I/O's can be chained together (this makes for a single, clean DigiLink connection between multiple I/O's and the CPU). One 12 foot DigiLink cable is included with an HD core purchase (for connection of the I/O to the CPU), and one 1.5 foot cable is included with each HD I/O (for chaining multiple I/O units together). Purchased separately, longer DigiLink cables — 25', 50' and 100'* — are useful for environments in which isolating machine noise-generating CPUs is an issue.*DigiLink 100' does not support sample rates above 96 kHz.

DigiLink cables are designed to connect an HD I/O peripheral (such as 192 I/O or 96 I/O) to an HD PCI card, or an HD I/O to another HD I/O, as two HD I/O's can be chained together (this makes for a single, clean DigiLink connection between multiple I/O's and the CPU). One 12 foot DigiLink cable is included with an HD core purchase (for connection of the I/O to the CPU), and one 1.5 foot cable is included with each HD I/O (for chaining multiple I/O units together). Purchased separately, longer DigiLink cables — 25', 50' and 100'* — are useful for environments in which isolating machine noise-generating CPUs is an issue.*DigiLink 100' does not support sample rates above 96 kHz.

If you choose the right cable you will hear the difference! SOMMER QUANTUM HIGHFLEX is a multi 8 channel cable, one of the best cables with a diameter of only 13,8 mm.

Shuko Power male & XLR female to Euro Power female & XLR male 10 meter