Power Amplifiers

Featuring 6 x 50 watts per channel, the RMB-1506 is a rugged, sophisticated, multichannel amplifier for those with a limited number of zones to fill with music. The RMB-1506 is perfect for less elaborate multizone audio systems and can be mated with our surround receiver or our preamp/processors to add music throughout three additional living areas or “zones” of your home. A buffered link output allows you to link additional amplifiers for larger multizone applications. As with all Rotel custom amplifiers it includes the most wanted custom installation features such as front panel attenuation control, input linking, 12-volt trigger, buffered link output, five-way binding posts and an IEC detachable power cord.

Music everywhere with 8 x 50 watts per channel is the purpose of our rack mountable RKB-850. Rotel has been designing and manufacturing award-winning power amplifiers for over 50 years. That considerable expertise has now been applied to a new generation of rackmount custom installation amplifiers that set new standards for performance, reliability, and ease of installation. The RKB-850 is rated at 8 x 50 Watts RMS into 8 ohms all channels driven, and can double that output into 4 ohms as a result of its sophisticated, efficient Class D design. The amplifier is rugged and extremely reliable, but Rotel has gone one step further to maximize long service life by utilizing dual thermostatically controlled fans to exhaust heat away from the output modules and power supply. One of the many custom-friendly features the RKB-850 offers is input linking. A second input can source from any ‘upstream’ input - so B can source from A, C can source from B and D can source from C. You can create four individual stereo zones, two dual zones or three common zones plus an individual zone. In other words, two Sonos Connects (for instance) might be divided between kitchen and patio (A+B zones) and Master Bedroom and Bath (C+D). Other features include input signal sensing, buffered link output, a sum-to-mono feature, a rear panel RS232 connection allowing connection to automation systems to provide full control and feedback, and four front panel trim pots to allow easy level adjustment to balance zones.

For music enthusiasts who won’t accept compromise, the reference RC-1590 preamplifier is in a class by itself. It’s all about control. The RC-1590 stereo preamplifier has been engineered to the highest audio performance levels and provides an incredible level of control and flexibility for the user. Starting with a high performance power supply consisting of two Rotel custom built toroidal transformers for maximum efficiency and low magnetic fields, these transformers provide low-noise isolation between the analog and digital signals. They are part of a reference grade power supply consisting of individual analog and digital regulator circuits with custom-made slit-foil capacitors. Slit-foil capacitors have very quick charge/discharge times and low signal loss ensuring tight bass performance. Rotel engineers wanted to create a reference quality stereo preamplifier to match with our new RB-1590 stereo power amplifier. Every aspect of component selection and circuit topography was designed and carefully evaluated during multiple listening sessions to ensure the highest fidelity. For example, analog and digital circuits were designed separately, by specialized Rotel teams. Analog inputs are all very low noise circuitry and include a high performance moving magnet phono stage. Digital inputs are fully isolated and feature a precision 32-bit 768kHz Digital to Analog Converter (DAC). The RC-1590 is fully feature-laden with Balanced XLR and Unbalanced RCA inputs and outputs, a TI precision volume control IC, a fixed volume line output, dual mono subwoofer outputs, digital outputs (Coax and Optical), digital inputs (3 Coax and 3 Optical), Aux, CD, and Tuner analog inputs, internal aptX Bluetooth (supports aptX and standard Bluetooth) with rear mounted external antenna, a front USB iPod with 2.1A charging input, and rear panel PC-USB 24-bit 192kHz input supporting DSD (Windows) and DoP (MAC computers DSD over PCM). Other essential features include a remote control, 2 x 12-volt trigger outputs, a dimmable display, an automatic power off function (configurable), RS232 and IP control for automation system integration, internet based software updates, Rotel Link connection, a detachable IEC power cord, an external IR remote input, and a front mounted 3.5mm headphone output jack. For music enthusiasts who won’t accept compromise, the RC-1590 preamplifier is in a class by itself, at a price that belies its incredible performance.

For music enthusiasts who won’t accept compromise, the reference RC-1590 preamplifier is in a class by itself. It’s all about control. The RC-1590 stereo preamplifier has been engineered to the highest audio performance levels and provides an incredible level of control and flexibility for the user. Starting with a high performance power supply consisting of two Rotel custom built toroidal transformers for maximum efficiency and low magnetic fields, these transformers provide low-noise isolation between the analog and digital signals. They are part of a reference grade power supply consisting of individual analog and digital regulator circuits with custom-made slit-foil capacitors. Slit-foil capacitors have very quick charge/discharge times and low signal loss ensuring tight bass performance. Rotel engineers wanted to create a reference quality stereo preamplifier to match with our new RB-1590 stereo power amplifier. Every aspect of component selection and circuit topography was designed and carefully evaluated during multiple listening sessions to ensure the highest fidelity. For example, analog and digital circuits were designed separately, by specialized Rotel teams. Analog inputs are all very low noise circuitry and include a high performance moving magnet phono stage. Digital inputs are fully isolated and feature a precision 32-bit 768kHz Digital to Analog Converter (DAC). The RC-1590 is fully feature-laden with Balanced XLR and Unbalanced RCA inputs and outputs, a TI precision volume control IC, a fixed volume line output, dual mono subwoofer outputs, digital outputs (Coax and Optical), digital inputs (3 Coax and 3 Optical), Aux, CD, and Tuner analog inputs, internal aptX Bluetooth (supports aptX and standard Bluetooth) with rear mounted external antenna, a front USB iPod with 2.1A charging input, and rear panel PC-USB 24-bit 192kHz input supporting DSD (Windows) and DoP (MAC computers DSD over PCM). Other essential features include a remote control, 2 x 12-volt trigger outputs, a dimmable display, an automatic power off function (configurable), RS232 and IP control for automation system integration, internet based software updates, Rotel Link connection, a detachable IEC power cord, an external IR remote input, and a front mounted 3.5mm headphone output jack. For music enthusiasts who won’t accept compromise, the RC-1590 preamplifier is in a class by itself, at a price that belies its incredible performance.

The A2700 power amplifier is the perfect partner for the P1 pre-amplifier. The Elipson A2700 power amplifier is a high-end model capable of delivering a high power output of 400 W RMS under 8 ohms in stereo mode or 1400 W RMS under 8 ohms in mono mode. The Elipson A2700 power amp is thus able to give life and energy to any pair of floorstanding or bookshelf speakers. Its association with a preamplifier is also facilitated by its unbalanced RCA and balanced XLR inputs. It amplifies any signal in its entirety with disconcerting ease thanks to its high amplification capacity: 400 W RMS under 8 Ohms, 700 W RMS under 4 Ohms and especially 900W in impulse mode under 2 Ohms. Modular, it can be bridged in mono and offer 1400 W RMS (2500 W peak) under 8 Ohms, and this, without thermal runaway So this amplifier can drive all the speakers of the market. Beyond its power and its modularity, it is also the techniques used that impress: oriented towards the minimisation of background noise and distortion, as these are essential elements in the respect of the intensity of the notes in the service of musicality. An iron fist in a velvet glove, that's really what characterizes our amplifier, allowing you to find the live experience of a concert in all its complexity and finesse. Our range is entirely made in France in our Burgundy factory.

To meet the expectations of the most demanding music lovers, who pay special attention to the final output of their audio system, and dedicate an important part of their free time listening to music, we designed the Mono power amplifier X -A220. Because of its musical performance together with its smart presentation, the monophonic power amplifier X-A220 is an awesome piece of equipment. A mono amplifier is ideal for improving the overall performance of a Hi-Fi system. Indeed, this principle prevents any interaction between power supply circuits as well as between the left channel and the right channel of the amplifier. The high power supply associated with the triple output stage provided with the famous MAA 1000’s "high level current " transistors (NJW0281G - NJW0302G), allow to the the X-A220 mono power amplifier to deliver a power of 220 Watts RMS into 8 Ohms. Combined with its "Hi Bias" function, the X-A220 will drive easily all the speakers found on the market. The X-A220 provides a power of 220 W per channel in class AB, and a switch on the rear panel allows to deliver the first watts in Class A. Beyond this limit, the amplifier commutes automatically in Class AB.

The BX2 is a 215 Watts on 8 Ohms mono power amplifier. Advance Paris development team has been inspired by our X-A1200 reference amplifier to create the BX2 amplifier. This amplifier can drive all types of speakers  and it is totally polyvalent for HiFi or home-cinema use. The BX2 integrates best selected components and special effort has been done on the power supply part. Oversized toroidal transformer combined to 10.000uF/80V capacitors enable the BX2 to provide high current level. Our BX2 provides Cinch (unbalanced input) or XLR ( balanced input) connectors, switchable on the rear panel.BX2 has a High Bias function, that allows the amplifier to deliver the first watts in a similar A Class. After that, the amp will be working in Class AB. Gain adjustment (-12,-6,-3 or 0dB, dimmer switch, upgradable port and bi-wiring speakers terminals complete unique features of this audiophile mono power amplifier. Available in black or white color.

The BX2 is a 215 Watts on 8 Ohms mono power amplifier. Advance Paris development team has been inspired by our X-A1200 reference amplifier to create the BX2 amplifier. This amplifier can drive all types of speakers  and it is totally polyvalent for HiFi or home-cinema use. The BX2 integrates best selected components and special effort has been done on the power supply part. Oversized toroidal transformer combined to 10.000uF/80V capacitors enable the BX2 to provide high current level. Our BX2 provides Cinch (unbalanced input) or XLR ( balanced input) connectors, switchable on the rear panel.BX2 has a High Bias function, that allows the amplifier to deliver the first watts in a similar A Class. After that, the amp will be working in Class AB. Gain adjustment (-12,-6,-3 or 0dB, dimmer switch, upgradable port and bi-wiring speakers terminals complete unique features of this audiophile mono power amplifier. Available in black or white color.

The BX1 is a stereo power amplifier that can be linked with AX1, DX1 or PX1. This amplifier 2*105 w on 8 Ohms will be able to drive, due to its versatility, neutrality and dynamics, most of the speakers found in the market.Thanks to its white or black transparent methacrylate front panel, you will appreciate its design and ergonomics, as the general conception and building of the several subsets inside. Our BX1 provides Cinch (unbalanced) or XLR ( balanced) connectors, switchable on the rear panel.BX1 has a High Bias function, that allows the amplifier to deliver the first watts in a similar A Class.After that, the amp will be working in Class AB. The inside tooling is based on compartments, insuring mecanical rigidity and the components shielding, starting with the 480 VA toroidal transformer. The voltage is rectified by 4 capacitors of 6800 uF under 63 volts.Power stages are supplied by Toshiba transistors that are famous for their audio quality.The result is a neutral and transparent listening, especially by an excellent performance in sound power. The lower frequencies are strengh and without heaviness, and for the medium frequencies, a very detail rendering of the voices and audio signal.The trebles are not left out with a lack of agressiveness and great finesse. The BX1 provides speaker connectors in order to connect 2 pairs of loudspeakers.

The BX1 is a stereo power amplifier that can be linked with AX1, DX1 or PX1. This amplifier 2*105 w on 8 Ohms will be able to drive, due to its versatility, neutrality and dynamics, most of the speakers found in the market.Thanks to its white or black transparent methacrylate front panel, you will appreciate its design and ergonomics, as the general conception and building of the several subsets inside. Our BX1 provides Cinch (unbalanced) or XLR ( balanced) connectors, switchable on the rear panel.BX1 has a High Bias function, that allows the amplifier to deliver the first watts in a similar A Class.After that, the amp will be working in Class AB. The inside tooling is based on compartments, insuring mecanical rigidity and the components shielding, starting with the 480 VA toroidal transformer. The voltage is rectified by 4 capacitors of 6800 uF under 63 volts.Power stages are supplied by Toshiba transistors that are famous for their audio quality.The result is a neutral and transparent listening, especially by an excellent performance in sound power. The lower frequencies are strengh and without heaviness, and for the medium frequencies, a very detail rendering of the voices and audio signal.The trebles are not left out with a lack of agressiveness and great finesse. The BX1 provides speaker connectors in order to connect 2 pairs of loudspeakers.

The Pre-XR is one of the first wave of products, heralding the new XR series of Cyrus components. The familiar Cyrus precision die-cast case is the same, but everything else has changed. With ground-up engineering inside, an all-new phantom black paint finish, touch-sensitive controls and a higher resolution display that is customisable for brightness, contrast and polarity, the high-quality finish of XR makes a strong statement. High Capacity Power Supply The power supply design of the Pre-XR has received special attention. An over-specified 74VA power transformer delivers power to a high capacity power supply reserve. Within the circuit design, a generous total of 15 independent power supply regulators regulate, then sub regulates quiet power. Digital control circuits are assigned a separate mains power supply, completely isolated from the signal circuitry. Balanced And Unbalanced Output Options  The Pre-XR features a choice of balanced audio drive via XLR connectors for best performance in systems where it is partnered by high-end power amplifiers with balanced inputs. An unbalanced output is also provided. All New Analogue Preamplifier The Pre-XR analogue preamp features relay input selection and a new high-performance gain stage. This short path design makes the analogue preamplifier extremely transparent. With four analogue inputs and phono MM, the Pre-XR will cover just about any system requirement for analogue connectivity. PSU-XR Port The Pre-XR includes a port for the new PSU-XR power supply. Thirty years ago Cyrus broke new ground with the introduction of the PSX-R, the first-ever regulated power supply upgrade that automatically adapted to match perfectly the power requirements of any connected product. The PSU-XR raises the bar by sourcing no less than five independent regulated supplies in a single box. For the Pre-XR the PSU-XR steps in to take over power supply for the analogue stages of the preamplifier. PRE-XR Digital Performance  The DAC input stage of the Pre-XR features a new 2nd generation version of our award-winning QXR DAC, but with an all-new high-speed analogue buffer stage. Seven digital filter alignment options are user adjustable to suit the taste of the listener. Input options include USB audio (to 768k sample rate) and DSD to DSD512, 2 x SPDIF digital and 2 x optical digital inputs. Fully Configurable  A new menu system makes the Pre-XR highly customisable yet easy to set up. With a tree-style navigation structure and both local and remote control navigation, menu settings are quick and simple to select.

Exceptional Power, Immersive Sound The PA720 is a high-performance power amplifier that delivers 7 channels of efficient Class G amplification. With an impressive 140W per channel, the PA720 is designed to offer the greatest flexibility and power without compromising on control. Featuring the best-in-class components including a toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion, the PA720 masters the reproduction of music with all its originality and detail for an unmatched level of sound quality and clarity.

Exceptional Power, Immersive Sound The PA410 is a high-performance power amplifier that delivers 4 channels of efficient Class AB amplification. With an impressive 70W per channel, the PA410 is designed to offer the greatest flexibility and power without compromising on control.  Featuring the best-in-class components including a toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion, the PA410 masters the reproduction of music with all its originality and detail for an unmatched level of sound quality and clarity.

Exceptional Power, Immersive Sound The PA240 is a high-performance power amplifier that delivers 2 channels of efficient Class G amplification. With an impressive 380W per channel, the PA240 is designed to offer the greatest flexibility and power without compromising on control. Featuring the best-in-class components including a toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion, the PA240 masters the reproduction of music with all its originality and detail for an unmatched level of sound quality and clarity.

Amazing Flexibility The C 298 may be a basic Power Amp, but we have carefully thought through all the use cases typically encountered to create a rich feature content. Selectable balanced inputs make the C 298 a natural for studio use or connection to High End Preamps and Processors. These inputs include a trim control useful for matching to other components. A line out allows further addition of power on the same channel for additional speakers or subwoofers. Auto-sense with selectable threshold is perfect for automating complex systems or hiding the amp out of sight in a cabinet. We even include a Ground Lug that can be very useful for eliminating ground loops and noise in complex multi-unit systems. Added to all this connectivity is a Bridge Switch that turns the C 298 into an amazingly powerful Monobloc Amplifier. Start with one and add a second C 298 later when you upgrade your speakers. Getting the Basics Right It is surprising how many seemingly advanced products in the market today often miss many of the most basic requirements for satisfying performance. Low noise circuits, accurate channel balance, proper input and output impedance characteristics, high overload margins and stability with difficult speaker loads. NAD starts by getting these things precisely right and advances from there. Our line inputs, both Balanced and Single-ended, can accommodate all kinds of analog source components by offering ideal input impedance characteristics with linear ultra-low-noise buffer amplifiers to prevent any sonic degradation caused by inappropriate loading of the source device. These are all details you can hear. Sophisticated Power NAD has moved away from the old fashioned and very power hungry linear power supplies and Class AB output stages that waste nearly half of the energy consumed producing heat rather than sound. Instead we have developed even better performing circuits based on switch mode power supplies and Class D output stages. Once thought to be inferior to traditional topologies, NAD’s advanced work in this area has created some of the best performing amplifiers regardless of basic design principle. These new designs are very linear over a wide bandwidth and provide consistent performance into all speaker loads, providing a dramatic advance over previous models. The generously dimensioned power supply easily allows for 185 watts continuous and over 570 watts instantaneous power for short term musical transients. Innovative Asymmetrical Power-Drive fully utilizes every last watt available with its vast reserves of dynamic power available to accurately reproduce musical transients without distortion or compression. It can operate with any AC mains voltage from 100v to 240v and provides pure DC power to all the various stages of the C 298. This highly efficient supply also provides near perfect regulation of voltage across a wide range of conditions and provides a solid noise-free foundation for the amplifying stages. Purifi ‘Eigentakt’ Amplifier Technology Purifi is a Danish technology company that has brought together several of the industry’s leading engineers to apply advanced mathematical modelling to solve the last remaining limitations of audio amplifiers. While there are many good sounding amplifiers on the market today, Purifi has taken a fresh look at every aspect of amplifier performance and found many seemingly small non-linearities that can make a dramatic difference in the overall sound. This return to first principles has resulted in a stunningly simple approach to some remarkably complex problems. With features and technology unmatched by other amplifiers in its class, the C 298 amplifier is an easy upgrade for any system and a surprising partner for the most sophisticated and advanced loudspeakers on the market.

The RB-1572, a high power class D stereo amplifier at 2 x 250 Watts, can be used with the RMB-1575 to expand your theater system from 5.1 to a 7.1 system. It can also be chosen to stand alone as a reference stereo Hi-Fi system. Whatever option you choose, it has the same superb performance characteristics, sound quality, and custom installation options as the RMB-1575.

Power - refined, detailed, and plenty of it. Rotel’s new Class AB stereo power amplifier is rated at 350 Watts per channel into 8 ohms both channels driven. That is a lot of power, but larger listening rooms or less sensitive loudspeaker designs require it to bring out the best possible performance and attain realistic audio dynamics. The impressive capabilities of this amplifier begin with a solid foundation consisting of twin massive toroidal transformers custom made by Rotel. These transformers are just part of a rock-solid power supply that includes eight special British made BHC capacitors, known for their low loss and quick response times. These components will continue to supply all of the voltage and current requirements needed, even under the most difficult load conditions. But power unrefined has never been a Rotel design goal. Every aspect of circuit design has been carefully considered and each component has been rigorously selected after extensive listening sessions. The circuit topography has been laid out in a true monoblock design, ensuring maximum signal separation and improved stereo imaging. Features include: XLR Balanced and RCA input connections, two pair of 5-way speaker binding posts, 12-volt trigger control, thermal protection circuitry, overcurrent, over-voltage protection circuitry, dual staged power on relay to reduce surge current and extend longevity, and a detachable IEC power cord all in a 5U chassis with included rack ears. The RB-1590 has been designed for the most discerning audio enthusiast and will provide the highest levels of audio performance.

Power - refined, detailed, and plenty of it. Rotel’s new Class AB stereo power amplifier is rated at 350 Watts per channel into 8 ohms both channels driven. That is a lot of power, but larger listening rooms or less sensitive loudspeaker designs require it to bring out the best possible performance and attain realistic audio dynamics. The impressive capabilities of this amplifier begin with a solid foundation consisting of twin massive toroidal transformers custom made by Rotel. These transformers are just part of a rock-solid power supply that includes eight special British made BHC capacitors, known for their low loss and quick response times. These components will continue to supply all of the voltage and current requirements needed, even under the most difficult load conditions. But power unrefined has never been a Rotel design goal. Every aspect of circuit design has been carefully considered and each component has been rigorously selected after extensive listening sessions. The circuit topography has been laid out in a true monoblock design, ensuring maximum signal separation and improved stereo imaging. Features include: XLR Balanced and RCA input connections, two pair of 5-way speaker binding posts, 12-volt trigger control, thermal protection circuitry, overcurrent, over-voltage protection circuitry, dual staged power on relay to reduce surge current and extend longevity, and a detachable IEC power cord all in a 5U chassis with included rack ears. The RB-1590 has been designed for the most discerning audio enthusiast and will provide the highest levels of audio performance.

Performer s800 is a stereo power amplifier that delivers 2 x 285 W to 4 ohms loudspeakers. In bridge mode it delivers 450 W into 4 or 8 ohms.The technical basis of all Professional Fidelity units is the proprietary 120 V Rail Technology, which is also called VOLTAiR technology. The name makes reference to the unequalled high voltage of 120 V (+/-60 V DC) and the huge dynamic range of over 140 dB that goes with it.Features: Bi polar transistor power amplifier with VOLTAiR 120V technology2 x 285 W into 4 ohms; 2 x 185 W into 8 ohms (stereo operation) 450 W into 8 ohms (mono operation – Bridge Mode)Toroidal transformer with 855 VA40800 µF capacitance for faithful reproduction of impulse peaksGold-plated loudspeaker binding posts with protection coversNeutrik XLR connectors for balanced in- and outputsDirect slave through of the input (e.g. for bi-wiring)Input trim switch for attenuation up to -5.5 dB in 0.5 dB stepsAMP CTL connector for remote power on/off switching Overheat protection with Temp LEDDC (direct current) voltage protection with Protect LEDFront and Lid made from aluminum, housing made from sheet metalMade in GermanySpecifications:Frequency response: 1Hz-125kHz, +/- 0.5dBInputs: 1Outputs: 1Filter:  Hi Pass (50 Hz)Signal to Noise Ratio: ›130dBMaximum Level Input: +17dBuMaximum Level Output: +34dBuTotal Harmonic Distortion: 0.0005%Phantom Power: NAIInput Type: 1 x XLR & TRSOutput Type: 1 x XLR & TRS​

Performer s800 is a stereo power amplifier that delivers 2 x 285 W to 4 ohms loudspeakers. In bridge mode it delivers 450 W into 4 or 8 ohms.The technical basis of all Professional Fidelity units is the proprietary 120 V Rail Technology, which is also called VOLTAiR technology. The name makes reference to the unequalled high voltage of 120 V (+/-60 V DC) and the huge dynamic range of over 140 dB that goes with it.Features: Bi polar transistor power amplifier with VOLTAiR 120V technology2 x 285 W into 4 ohms; 2 x 185 W into 8 ohms (stereo operation) 450 W into 8 ohms (mono operation – Bridge Mode)Toroidal transformer with 855 VA40800 µF capacitance for faithful reproduction of impulse peaksGold-plated loudspeaker binding posts with protection coversNeutrik XLR connectors for balanced in- and outputsDirect slave through of the input (e.g. for bi-wiring)Input trim switch for attenuation up to -5.5 dB in 0.5 dB stepsAMP CTL connector for remote power on/off switching Overheat protection with Temp LEDDC (direct current) voltage protection with Protect LEDFront and Lid made from aluminum, housing made from sheet metalMade in GermanySpecifications:Frequency response: 1Hz-125kHz, +/- 0.5dBInputs: 1Outputs: 1Filter:  Hi Pass (50 Hz)Signal to Noise Ratio: ›130dBMaximum Level Input: +17dBuMaximum Level Output: +34dBuTotal Harmonic Distortion: 0.0005%Phantom Power: NAIInput Type: 1 x XLR & TRSOutput Type: 1 x XLR & TRS​

Our powerhouse mono-block. With the power of 1000 W this amplifier controls every loudspeaker effortlessly. Thanks to VOLTAiR technology it is fast, direct and highly efficient with an outstanding sound. Individual design The Performer m1000 can be equipped with a black, red or silver decorative panel that are included in the scope of delivery. This gives you a choice of three colour variants for your chosen basic colour. The decorative panels adhere with the help of a strong neodymium magnet. No tools are therefore required for changing them. Better safe than sorry The Performer m1000 has a protection circuit against DC voltage and a limiter against output overload. If direct current (DC) is detected, the output stage switches off automatically and the Protect LED lights up red. To protect the output against overdriving, an LDR limiter (light-dependent resistor) is used. Since it works optically, the audio quality is not affected. The Protect LED lights up yellow when the limiter responds. As one calls into the forest, so it echoes out. This saying inspired us to send the input signal out again in order to drive another power amplifier in bi-amping mode. Trim to fit With reference to the m1000, “fit” means adapted. And you can adapt the input sensitivity in 0.5 dB steps. From 0 dB to -5.5 dB. This is the much more audiophile solution for acoustically problematic rooms or loudspeaker set-ups than the panorama potentiometer of the preamplifier. In addition, the difference in loudness of loudspeakers can be elegantly compensated in bi-amping mode. Plus & Minus The loudspeaker binding posts can accommodate banana plugs as well as a stranded wire with a diameter of up to 4mm. For bi-wiring operation, both types of connection can be used together. No loudspeaker with less than 2 ohms impedance may be connected. AMP CTL The power amplifier can be switched on and off using the AMP CTL connection between the Performer m1000 and a preamplifier such as the Director Mk2 or the Crossover. To do this, connect the 3.5 mm jack sockets with a cable with 3.5 mm mono or stereo jack plugs. Third-party preamps can also switch the Performer m1000 on and off with a 12 V trigger. Keep cool Inside the Performer m1000, six fans usually do nothing at all, because 90% of the heat is passively dissipated via massive heat sinks. Should it nevertheless become really loud for a really long time, the processor-controlled fans remain virtually inaudible at only 19 dB (A). Specifications: Analog Input & Thru: XLR (balanced) Input gain (max): 32.5 dBu Input impedance (THRU not connected): 20 kΩ Common mode rejection (THRU not connected): -82 dBu Input sensitivity: 12.5 dBu Loudspeaker Output: Binding posts with ø4mm cable hole (screwable) and banana plug Output power (RMS, 2 Ω): 1000 W Harmonic distortion (1 kHz, 2 Ω): < 0.08 % Output power (RMS, 4 Ω): 750 W Harmonic distortion (1 kHz, 4 Ω): < 0.05 % Output power (RMS, 8 Ω): 420 W Harmonic distortion (1 kHz, 8 Ω): < 0.03 % Output power (peak to peak): 180 V Output voltage (RMS): 64.6 V Output impedance (20 Hz – 20 kHz): < 0.031 Ω Amplification gain: 26 dB Damping factor (1 kHz, 8 Ohm): > 280 Frequency range (-3dB): 10 Hz – 80 kHz Noise (A-weighted): -123 dB Internal Linear Power Supply with Shielded Toroidal Transformer Toroidal transformer: 1375 VA Operating voltage (Input stage): +/- 60 V Operating voltage (power stage): +/- 91 V Operating voltage for relays, LEDs, AMP CTL: + 12 V Mains Power Supply Mains voltage (selectable, see fuse chamber): 230 V AC / 50; 115 V AC / 60 Hz Fuse 230 V: T 6.3 mA Fuse 115 V: T 12 A Power consumption: max. 1375 VA Idle power consumption: 50 W Stand-by power consumption: < 0.3 W Dimensions & Weight W x H x D (width x height incl. feet x depth): 278 x 205 x 375 mm Unit weight: 24.8 kg Shipping weight: 29.3 kg

Our powerhouse mono-block. With the power of 1000 W this amplifier controls every loudspeaker effortlessly. Thanks to VOLTAiR technology it is fast, direct and highly efficient with an outstanding sound. Individual design The Performer m1000 can be equipped with a black, red or silver decorative panel that are included in the scope of delivery. This gives you a choice of three colour variants for your chosen basic colour. The decorative panels adhere with the help of a strong neodymium magnet. No tools are therefore required for changing them. Better safe than sorry The Performer m1000 has a protection circuit against DC voltage and a limiter against output overload. If direct current (DC) is detected, the output stage switches off automatically and the Protect LED lights up red. To protect the output against overdriving, an LDR limiter (light-dependent resistor) is used. Since it works optically, the audio quality is not affected. The Protect LED lights up yellow when the limiter responds. As one calls into the forest, so it echoes out. This saying inspired us to send the input signal out again in order to drive another power amplifier in bi-amping mode. Trim to fit With reference to the m1000, “fit” means adapted. And you can adapt the input sensitivity in 0.5 dB steps. From 0 dB to -5.5 dB. This is the much more audiophile solution for acoustically problematic rooms or loudspeaker set-ups than the panorama potentiometer of the preamplifier. In addition, the difference in loudness of loudspeakers can be elegantly compensated in bi-amping mode. Plus & Minus The loudspeaker binding posts can accommodate banana plugs as well as a stranded wire with a diameter of up to 4mm. For bi-wiring operation, both types of connection can be used together. No loudspeaker with less than 2 ohms impedance may be connected. AMP CTL The power amplifier can be switched on and off using the AMP CTL connection between the Performer m1000 and a preamplifier such as the Director Mk2 or the Crossover. To do this, connect the 3.5 mm jack sockets with a cable with 3.5 mm mono or stereo jack plugs. Third-party preamps can also switch the Performer m1000 on and off with a 12 V trigger. Keep cool Inside the Performer m1000, six fans usually do nothing at all, because 90% of the heat is passively dissipated via massive heat sinks. Should it nevertheless become really loud for a really long time, the processor-controlled fans remain virtually inaudible at only 19 dB (A). Specifications: Analog Input & Thru: XLR (balanced) Input gain (max): 32.5 dBu Input impedance (THRU not connected): 20 kΩ Common mode rejection (THRU not connected): -82 dBu Input sensitivity: 12.5 dBu Loudspeaker Output: Binding posts with ø4mm cable hole (screwable) and banana plug Output power (RMS, 2 Ω): 1000 W Harmonic distortion (1 kHz, 2 Ω): < 0.08 % Output power (RMS, 4 Ω): 750 W Harmonic distortion (1 kHz, 4 Ω): < 0.05 % Output power (RMS, 8 Ω): 420 W Harmonic distortion (1 kHz, 8 Ω): < 0.03 % Output power (peak to peak): 180 V Output voltage (RMS): 64.6 V Output impedance (20 Hz – 20 kHz): < 0.031 Ω Amplification gain: 26 dB Damping factor (1 kHz, 8 Ohm): > 280 Frequency range (-3dB): 10 Hz – 80 kHz Noise (A-weighted): -123 dB Internal Linear Power Supply with Shielded Toroidal Transformer Toroidal transformer: 1375 VA Operating voltage (Input stage): +/- 60 V Operating voltage (power stage): +/- 91 V Operating voltage for relays, LEDs, AMP CTL: + 12 V Mains Power Supply Mains voltage (selectable, see fuse chamber): 230 V AC / 50; 115 V AC / 60 Hz Fuse 230 V: T 6.3 mA Fuse 115 V: T 12 A Power consumption: max. 1375 VA Idle power consumption: 50 W Stand-by power consumption: < 0.3 W Dimensions & Weight W x H x D (width x height incl. feet x depth): 278 x 205 x 375 mm Unit weight: 24.8 kg Shipping weight: 29.3 kg

Our powerhouse mono-block. With the power of 1000 W this amplifier controls every loudspeaker effortlessly. Thanks to VOLTAiR technology it is fast, direct and highly efficient with an outstanding sound. Individual design The Performer m1000 can be equipped with a black, red or silver decorative panel that are included in the scope of delivery. This gives you a choice of three colour variants for your chosen basic colour. The decorative panels adhere with the help of a strong neodymium magnet. No tools are therefore required for changing them. Better safe than sorry The Performer m1000 has a protection circuit against DC voltage and a limiter against output overload. If direct current (DC) is detected, the output stage switches off automatically and the Protect LED lights up red. To protect the output against overdriving, an LDR limiter (light-dependent resistor) is used. Since it works optically, the audio quality is not affected. The Protect LED lights up yellow when the limiter responds. As one calls into the forest, so it echoes out. This saying inspired us to send the input signal out again in order to drive another power amplifier in bi-amping mode. Trim to fit With reference to the m1000, “fit” means adapted. And you can adapt the input sensitivity in 0.5 dB steps. From 0 dB to -5.5 dB. This is the much more audiophile solution for acoustically problematic rooms or loudspeaker set-ups than the panorama potentiometer of the preamplifier. In addition, the difference in loudness of loudspeakers can be elegantly compensated in bi-amping mode. Plus & Minus The loudspeaker binding posts can accommodate banana plugs as well as a stranded wire with a diameter of up to 4mm. For bi-wiring operation, both types of connection can be used together. No loudspeaker with less than 2 ohms impedance may be connected. AMP CTL The power amplifier can be switched on and off using the AMP CTL connection between the Performer m1000 and a preamplifier such as the Director Mk2 or the Crossover. To do this, connect the 3.5 mm jack sockets with a cable with 3.5 mm mono or stereo jack plugs. Third-party preamps can also switch the Performer m1000 on and off with a 12 V trigger. Keep cool Inside the Performer m1000, six fans usually do nothing at all, because 90% of the heat is passively dissipated via massive heat sinks. Should it nevertheless become really loud for a really long time, the processor-controlled fans remain virtually inaudible at only 19 dB (A). Specifications: Analog Input & Thru: XLR (balanced) Input gain (max): 32.5 dBu Input impedance (THRU not connected): 20 kΩ Common mode rejection (THRU not connected): -82 dBu Input sensitivity: 12.5 dBu Loudspeaker Output: Binding posts with ø4mm cable hole (screwable) and banana plug Output power (RMS, 2 Ω): 1000 W Harmonic distortion (1 kHz, 2 Ω): < 0.08 % Output power (RMS, 4 Ω): 750 W Harmonic distortion (1 kHz, 4 Ω): < 0.05 % Output power (RMS, 8 Ω): 420 W Harmonic distortion (1 kHz, 8 Ω): < 0.03 % Output power (peak to peak): 180 V Output voltage (RMS): 64.6 V Output impedance (20 Hz – 20 kHz): < 0.031 Ω Amplification gain: 26 dB Damping factor (1 kHz, 8 Ohm): > 280 Frequency range (-3dB): 10 Hz – 80 kHz Noise (A-weighted): -123 dB Internal Linear Power Supply with Shielded Toroidal Transformer Toroidal transformer: 1375 VA Operating voltage (Input stage): +/- 60 V Operating voltage (power stage): +/- 91 V Operating voltage for relays, LEDs, AMP CTL: + 12 V Mains Power Supply Mains voltage (selectable, see fuse chamber): 230 V AC / 50; 115 V AC / 60 Hz Fuse 230 V: T 6.3 mA Fuse 115 V: T 12 A Power consumption: max. 1375 VA Idle power consumption: 50 W Stand-by power consumption: < 0.3 W Dimensions & Weight W x H x D (width x height incl. feet x depth): 278 x 205 x 375 mm Unit weight: 24.8 kg Shipping weight: 29.3 kg

At 2 x 200 Watts per channel and utilising Rotel's Balanced Design Concept for superior performance, the RB-1582 MkII is a compelling stereo amplifier. Rotel’s next largest stereo amplifier at 200 Watts per channel provides the massive current to drive the very largest Hi-Fi systems effortlessly. And like its smaller brother, the RB-1582 MkII has been designed to excel at resolving the subtle details in music as well as supplying the brawn required for extremely dynamic passages. It is able to achieve this difficult dual requirement because of the meticulous attention paid to circuit design and parts selection. The RB-1582 MkII's high-end performance begins with an extremely large toroidal transformer combined with a total of 60,000µF storage capacity in special “slit foil” capacitors to provide completely stable power to the output stage. Slit foil capacitors have the ability to charge and discharge extremely quickly, thereby ensuring signal fidelity during orchestral crescendos or repetitive kick-drum impacts, for example. Both left and right channel construction are laid out in a mono block design (after the toroidal transformer) and all grounding is terminated in a star pattern on a copper grounding plate to ensure low signal to noise. The output stage is a discrete design that consists of 10 high current bipolar transistors per channel. Input options consist of both balanced XLR and unbalanced RCA connectors. The RB-1582 MkII stereo power amplifier is yet another outstanding example of Rotel’s Balanced Design Concept and will form the heart of a very impressive stereo or home theatre system for years to come. Specifications: DIMENSIONS:  (W × H × D)431 × 144 × 407mm, 17" × 5.7" × 16" FRONT PANEL HEIGHT: 3U / 132.6mm (5.25") POWER REQUIREMENTS: 230V, 50Hz POWER CONSUMPTION: 550W STANDBY POWER CONSUMPTION: 0.5W NET WEIGHT: 17.6kg (39lbs.) BTU RATING: (4Ω, 1/8th power)1104 BTU/hComponents CONTINUOUS POWER OUTPUT: 200W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD)(20Hz–20kHz)

At 2 x 200 Watts per channel and utilising Rotel's Balanced Design Concept for superior performance, the RB-1582 MkII is a compelling stereo amplifier. Rotel’s next largest stereo amplifier at 200 Watts per channel provides the massive current to drive the very largest Hi-Fi systems effortlessly. And like its smaller brother, the RB-1582 MkII has been designed to excel at resolving the subtle details in music as well as supplying the brawn required for extremely dynamic passages. It is able to achieve this difficult dual requirement because of the meticulous attention paid to circuit design and parts selection. The RB-1582 MkII's high-end performance begins with an extremely large toroidal transformer combined with a total of 60,000µF storage capacity in special “slit foil” capacitors to provide completely stable power to the output stage. Slit foil capacitors have the ability to charge and discharge extremely quickly, thereby ensuring signal fidelity during orchestral crescendos or repetitive kick-drum impacts, for example. Both left and right channel construction are laid out in a mono block design (after the toroidal transformer) and all grounding is terminated in a star pattern on a copper grounding plate to ensure low signal to noise. The output stage is a discrete design that consists of 10 high current bipolar transistors per channel. Input options consist of both balanced XLR and unbalanced RCA connectors. The RB-1582 MkII stereo power amplifier is yet another outstanding example of Rotel’s Balanced Design Concept and will form the heart of a very impressive stereo or home theatre system for years to come. Specifications: DIMENSIONS:  (W × H × D)431 × 144 × 407mm, 17" × 5.7" × 16" FRONT PANEL HEIGHT: 3U / 132.6mm (5.25") POWER REQUIREMENTS: 230V, 50Hz POWER CONSUMPTION: 550W STANDBY POWER CONSUMPTION: 0.5W NET WEIGHT: 17.6kg (39lbs.) BTU RATING: (4Ω, 1/8th power)1104 BTU/hComponents CONTINUOUS POWER OUTPUT: 200W/Ch (All channels driven, 8Ω) TOTAL HARMONIC DISTORTION (THD)(20Hz–20kHz)

AN IMMERSIVE LISTENING EXPERIENCE THE HIGH-POWER SUBWOOFER AMPLIFIER  Designed for integration, with rack-mountable design, 100 IWSUB8 Amplifier delivers a peak power of 200 watts and a continuous power of 150 watts under 4 ohms, whilst ensuring a high-level electronic protection. Specially tailored for the passive subwoofer 100 IWSUB8, this amplifier is able to power up to two subwoofers connected in parallel.   This powerful combination is the ideal add-on to a 100 Series audio/video setup, delivering an unique ambiance and sound coverage in your living spaces. Key Points: Peak power: 200W (continuous power : 150W under 4Ώ). Amplifier able to drive 2 x 100 IWSUB8 subwoofers connected in parallel. High-level electronic protection (dynamic power control, thermal protection, short circuit, fuse, and over-current protection). Flush potentiometers. Dimensions (HxWxD): 1¾ x 16⅞ x 10⅛" [44.5 x 429 x 257mm]  - Height with stands: 2⅟16"  - Width with brackets: 19" Technical Specifications: Type: Subwoofer amplifier Power (continuous): Max 200W, 150W continuous (4Ώ) Minimum load: 4Ώ Voltage range: 100-120V~60Hz / 220-230V~50Hz Power consumption: 150W Stand-by power consumption: 0.5W Bandwith: 20-250Hz Subsonic filter: 18dB/oct. Inputs: LFE, Line in L/R Outputs: Line out L/R and subwoofer power output on speaker terminal Cord: Detachable IEC power cord Protection: Dynamic power control, thermal protection, short circuit, fuse, and over-current protection Dimensions (HxWxD): [44.5 x 429 x 257mm]  1 3/4 (2 1/16 with stands) x 16 7/8 (19 with brackets) x 10 1/8" Net weight: 6.8lbs (3.1kg)

Crafted for pure musical performance, Statement is the pinnacle of Naim Audio engineering knowledge and artistry. The series comprises the NAC S1 preamplifier and NAP S1 mono power amplifiers.  Origins The idea for an entirely new kind of amplifier was first conceived by our engineers over a decade ago and development began in earnest in 2011. The objective was to set a new reference standard in high-end audio and music reproduction. The result is Statement. Three years of relentless questioning, iterative design and a point blank refusal to accept no as an answer. Performance First Engineering Product engineers often begin with what exists already. They might ask how something can work better, or where improvements can be made. With Statement, we started with a blank sheet of paper and a vision: to create the ultimate amplifier. After the initial concept stage the engineering team set aside practical considerations and began to map out the product in free space. This creative freedom was then backed up by 3D computer models which confirmed the optimum position for each component. To accommodate this new layout Statement pioneers a new vertical structure. It was the best way to minimise electromagnetic and mechanical interference and maximise thermal performance. Duality In Design Statement's radically different aesthetic may seem like a departure from Naim Audio tradition but it's the ultimate expression of everything we represent. The imposing monolithic structure with its stark silhouette is offset by the organic sculptural flow of the heat sink and the beautifully lit volume control and central divide. This duality in the design reflects how our pursuit of technical brilliance is always grounded in the abstract human experience of music. If it's the best amplifier in the world in lab tests we’ve only done half a job - it's in the listening room where it really counts. Technology Everything about Statement is a leap forward in technology and design. It's been engineered from the ground up for pure performance. Isolation Statement perfectly represents our philosophy of providing the highest quality power supply, while isolating individual sections to avoid unwanted interference. The NAC S1 and NAP S1 share the same fundamental layout. The noisy power supply is housed in the base and sensitive electronics are nestled above. Each section is divided by an acrylic centre-piece that blocks interaction. Top section electronics are separated further still, with internal chambers isolating individual stages. Dual Power The Statement NAP S1 features a new bridged dual design with zero global feedback. The two stages are physically separated to optimise the amplifier circuit with the delicate voltage stage at the very top of the power amplifier, away from the current stage at the bottom. Each mono power amplifier uses a huge 4000VA transformer to power speakers with precisely 746W (into 8 ohms). Precision engineering also makes sure every single watt is delivered right to where it's needed, when it's needed. After all, power is nothing without purpose. Craft Every component, curve and connection in Statement demanded new levels of engineering and tolerance. Metallurgy The distinctive ‘wave’ heat sinks begin life as a solid billet of untreated aluminium, which is cut to size and machined to achieve the curved profile. The fins are then cut using a five-axis, temperature-controlled, CNC machine. It takes three hours for the finished shape to emerge. Once each piece is individually machined, it is painstakingly hand-polished and quality inspected. Finishing After the inspection process, the metalwork is submerged in baths of cleansing acid and then into a bath of electrolyte fluid containing black ink. A current is passed through it, bonding the ink to the metalwork and creating Naim Audio's signature black finish. It took several months of collaboration between our engineers and suppliers to achieve the finish Statement demanded. Hand-Crafting Statement has been designed and developed using cutting-edge manufacturing technology. But it takes a human touch to get things just right. For example, every sound-critical component is positioned and soldered by hand by our skilled technicians. As with all Naim Audio products final assembly is carried out by hand in Wiltshire, England. NAP S1 Audio Inputs: Analogue Input: 1 x XLR (each) Audio Outputs: Audio Outputs: Binding posts for spade & 4mm banana Power Output: 746W into 8 ohms, 1450W into 4 ohms, 9kW burst power into 1 ohm Physical: Weight: 101kg (each) Dimensions (HxWxD): 940 x 256 x 383mm (each)

As the debut product in our reference 500 Series range, the NAP 500 is a monumental expression of Naim Audio amplifier technology. Its design was honed over six years of collaborative work with suppliers of specialist parts and each product takes days of dedicated assembly by our most skilled technicians in Salisbury. It’s this eye for detail, alongside its remarkable power, that allows the NAP 500 to bring your music into breath-taking focus. New Statement Technology  Our flagship Statement amplification system was ten years in the making. The research and development project drew on all of our knowledge and expertise, yielding several breakthroughs in technology. We’ve recently introduced two new technologies from the Statement project to our core range of power amplifiers.  The NAP 500 now features the new NA009 transistors first introduced in Statement. In development for over a year, this key component was created in partnership with a specialist semi-conductor manufacturer to achieve the best possible sound quality. The 500 also includes the high power Naim Audio DR (Discrete Regulator) technology used in Statement to provide the smooth, stable power supply we know is critical for the audio electronics to make music come to life.  These two new technologies, combined with other small improvements to layout and componentry, mean the NAP 500 DR can produce even more of the fundamental musical pace, rhythm and timing that made the originals so popular with music lovers.  Features: 140W per channel output into 8 ohms; capable of prolonged output into 2 ohms with no discernible impact on performance Bridged power amplifier configuration for maximised open and closed-loop speed, with ten stages of local regulation per channel Two-box configuration with 500 PS power supply for optimum rejection of electromagnetic interference 1,100VA toroidal transformer provides 12 raw DC supplies for the power amplifier  25kg brushed, black-anodised chassis with distinctive heatsink plus variable speed intelligent fan system for discreet extra cooling if required Technology & Craft The NAP 500 delivers 140W per channel into 8 ohms and is capable of prolonged output into 2 ohms with no discernible impact to performance. Its two box configuration is classic Naim Audio, with the power supply completely removed to the separate 500 PS power supply for ultimate performance. Each channel of the NAP 500 includes ten stages of local regulation. To reduce interference from the mains supply further, the transformer and first stages of the power supply are in a separate enclosure, the 500 PS, which provides twelve raw D.C. supplies for the power amplifier. A bridged configuration allow for maximised open and closed loop speed, less intrusive protection circuitry and reduced interaction between input and output signals as the very high drive currents to the loudspeaker do not flow through the system earth. The NAP 500 also features the new output transistor, the NA009, specifically designed for the purpose through months of collaborative work with a specialist supplier. The circuit topology has been developed to maximise bandwidth and reduce distortion and power supply dependency. Also, special attention has been paid to reducing thermally-induced noise, an especially important consideration in power amplifiers. Audio Inputs: Input Impedance: 18kΩ Analogue Input: 2 x XLR Audio Outputs: Minimum Load Impedance: 2Ω Frequency Response: -3dB at 1.5Hz and 100kHz Gain: +30dB Finish: Case: Brushed and black anodised Front: Brushed and black anodised Physical: Shipping Weight: 28.2 kg Shipping Dimensions: 270 x 570 x 520 mm Weight: 25 kg Dimensions (HxWxD): 160 x 432 x 374 mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Power Supply Options: 500PS Speaker Outputs: Power Output: 140W/channel, 8Ω Transient: 700VA Speaker Outputs: L & R, 4mm “banana” sockets Supplied with: Supplied with: 500PS, Power-Line, Burndy

The NAP 300 power amplifier incorporates all the advances pioneered by its siblings and adopts the radical two-box configuration of its bigger brother, the NAP 500: one box houses the amplification circuitry, while another – the 300 PS – hosts the power supply components. It also features the new high-calibre Naim Audio NA009 transistors developed for the 500 Series. The NAP 300 delivers 90W per channel into 8 ohms and is capable of prolonged output into 2 ohms with no discernible impact on performance. The result is both superior purity of tone and immense power. New Statement Technology  Our flagship Statement amplification system was ten years in the making. The research and development project drew on all of our knowledge and expertise, yielding several breakthroughs in technology. We’ve recently introduced two new technologies from the Statement project to our core range of power amplifiers.  The NAP 300 now features the new NA009 transistors first introduced in Statement. In development for over a year, this key component was created in partnership with a specialist semi-conductor manufacturer to achieve the best possible sound quality. The 300 also includes the high power Naim Audio DR (Discrete Regulator) technology used in Statement to provide the smooth, stable power supply we know is critical for the audio electronics to make music come to life.  These two new technologies, combined with other small improvements to layout and componentry, mean the NAP 300 DR can produce even more of the fundamental musical pace, rhythm and timing that made the originals so popular with music lovers.  Features: 90W per channel output into 8 ohms; capable of prolonged output into 2 ohms with no discernible impact on performance Two-box configuration (300 PS power supply included) minimises electromagnetic interference High-power Naim Audio DR (Discrete Regulator) technology and NA009 output transistors as used in flagship Statement NAP S1 power amplifier Technology & Craft The Naim Audio NAP 300 delivers immense power without sacrificing any speed or agility to provide awe-inspiring levels of detail and musicality. Like the flagship Naim Audio NAP 500, the NAP 300 is a stereo two-chassis amplifier, one box containing the audio amplifier and the second housing the power supply. Improved earthing arrangements have resulted in an entirely new circuit topology built on a very high quality, anti-resonance main audio circuit board. The NAP 300 uses the same NA009 transistors that were custom-designed for the Statement NAP S1. These outstanding components each provide up to 80 Amps and 350 watts, negating the need to use parallel pairs of transistors (which always has a negative effect on sound). Additional NA009 transistors are used in the fully regulated power supply, ensuring the very best performance. A variable speed, virtually noiseless cooling fan is mounted on a large internal heat sink providing long-term stability and the ability to swing a massive 500 VA on transients. The NAP 300 is stable into any load and able to drive a 2-Ohm load for long periods of time. Audio Inputs: Input Impedance: 18kΩ Analogue Input: 2 x XLR Audio Outputs: Minimum Load Impedance: 2Ω Frequency Response: -3dB at 2Hz and 70kHz Gain: +29dB Finish: Case: Black powder coated Front: Brushed and black anodised Physical: Shipping Weight: 12.6 kg (excl. 300PS) Shipping Dimensions: 240 x 590 x 500 mm (excl. 300PS) Dimensions (HxWxD): 87 x 432 x 314 mm (excl. 300PS) Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Power Supply Options: 300PS Speaker Outputs: Power Output: 90W/channel, 8Ω Transient: 500VA Speaker Outputs: L & R, 4mm “banana” sockets Supplied with: Supplied with: 300PS, Burndy

Edge W is made to be played loud. When you do turn it up, expect nothing but a dynamic and punchy sound that captures all the musicality of your songs. With just 14 hand-picked components, Edge W has one of the cleanest signal paths available. It delivers our breath-taking, unadulterated British sound – nothing added, nothing taken away. For all its power, Edge W is remarkably detailed. The sound is finely balanced, with a musical depth and clarity that comes through with every note. It’s all down to how we chose the componentry inside – nothing was picked on price, specs or measured performance. We listened carefully. And created our system with components that simply sounded the best. The end result is a power amplifier that truly brings an original recording to life like no other. Although minimal in its exterior design, Edge W has some complex audio engineering inside. To remove the barriers between you and your music, we have worked hard to minimise the number of components in the signal path. As a result, Edge W delivers a more faithful reproduction of the original recording; an impressively detailed three-dimensional sound, with striking staging and focus. We pioneered the use of toroidal transformers in amplifiers, which led to improved performance. In Edge we take this one step further, using opposing symmetry twin toroidal transformers. This cancels out electromagnetic interference whilst offering outstanding power and maintaining consistent tonality, no matter how loud it’s played. Using standard Class A amplifier technology wasn’t going to be efficient enough for Edge W. Instead we added a bias voltage to a traditional Class AB design, reducing distortion to inaudible levels. This unique configuration also produces less heat and makes the whole system much more effective. Edge systems are designed to work in perfect synchronisation. Match the Edge W with our most versatile Preamplifier Network player, Edge NQ, to create a hi-fi system with a sound, and a look, unlike anything else. Specifications: CONTINUOUS POWER OUTPUT: 100W RMS into 8 Ohms; 200W RMS into 4 Ohms THD (UNWEIGHTED): 113 dB INPUT SENSITIVITY: Input A1-A2 (unbalanced) 1.09V RMS INPUT IMPEDANCES: Input A3 (balanced) 47k Ohm; Input A1-A2 (unbalanced) 47k Ohm INPUTS: Balanced, Unbalanced OUTPUTS: Speakers, Loop out MAX POWER CONSUMPTION: 1000W STANDBY POWER CONSUMPTION: 

The Crosby is a versatile high efficiency class-D stereo power amplifier which doesfor a perfect pair with the Young MkIII, both in size and sound. Its clean power is enough for most speakers, while its drive capability can be improved by setting it in bridge mode.In this case, the Crosby becomes a powerful mono amplifier; two Crosby in bridge mode can drive virtuallyevery speaker, be it an array of dynamic drivers or an electrostatic panel. Of course, the Crosby can be attached to every preamplifier, not only to the Young MkIII.It is provided with both single-ended and balanced inputs, plus trigger input/pass-through. Thanks to its class-D design, it is virtually impossible to destroy,all overload situations are reported on the front panel. Specifications : Inputs:single-ended (RCA)balanced (XLR)trigger (3.5mm jack) Outputs:speakers (posts)trigger pass-through (jack 3.5mm) Sensitivity:1.25Vrms5V (trigger) Input impedance:47 kOhms (single-ended)20 kOhms (balanced) Signal-to-Noise Ratio:115dBA (stereo)118dBA (bridged) THD+N:0.005% @ 60Wpc out on 8 Ohms Output Power Before Clipping:60Wpc (stereo, 8 Ohms)110Wpc (stereo, 4 Ohms)180W (bridged, 8 Ohms) Supply voltage:100-130VAC or 200-240VAC, 50/60Hz Power Consumption:615W (440Wpc on 4 Ohms mono)1.5W (standby) Size:200x200x50mm (wxdxh) Weight:net 3kg (including ancillaries)gross 3.5kg

Cyrus has a prestigious history of high-fidelity amplifier design. For more than 30 years we have crafted some of the world’s finest audio components. The finest of them all is the Mono X 300. Engineered from scratch using our in-house developed Zero Feedback technology, the Mono X carries both prodigious power and exceptional control. Capable of driving the world’s most demanding speakers, the Mono X is the crown prince of power amplifiers. You will need two of these bad boys. As the name implies, the Mono X 300 amplifies only one signal. By separating the amplification of the left and right channels into two separate boxes, each has its own reserves of power, and the possible noise and interference that one channel can have on the other is greatly reduced. Our best power amplifier, the Mono X 300 Signature can provide an enormous 319 Watts of power to your speakers (through 6 Ohms). Our Zero Feedback technology means that the sound coming out of the amp is exactly the same as the one going in – just bigger. The amplification processes inside this handcrafted Cyrus chassis have been expertly engineered with complex circuitry making sure that the output is powerful and precise. Mono X 300 Signature contains a 305VA ultra-low noise transformer and through our expertly engineered circuitry we ensure that nothing is added to the signal as it passes through the amplifier. As music volumes drop, it becomes increasingly important that the only sound being issued from a hi-fi system is the music itself. Our Zero Feedback technology means that in tests, our best power amplifier produces negligible distortion at low volume. To maintain the precise sound quality Cyrus is known for, but ensure adequate ventilation of our power amps, we’ve developed a smart cooling system for the Mono X 300 Signature. This system only activates the fan when it’s needed – when you’re listening at high volumes. When the volume drops or silences are detected, the fan automatically switches off so there’s never any unwanted background noise.

The X Power can be used in multiple scenarios. Most typical would be in a Pre / Power system with Pre₂ DAC or Stream XP₂. Also compatible with integrated amplifiers in bi-amped stereo configuration. The fixed gain structure enables compatibility with any Cyrus amplifier. Beneath the understated exterior of the X Power lies a powerful, passionate heart of pure soul. Capable of reproducing a huge dynamic range, the X Power delivers pin-point precision and dimension-defying power with aplomb. Used with one of our own pre-amplifiers, the X Power makes a great first step on the separate pre-amplifier / power amplifier path. As the X power can operate in mono or stereo mode, when you want a bit more from your system, you can purchase a second X-power and switch both to mono mode, each delivering up to 181 watts of power.

Those in the know about audiophile components recognise quality when they hear it. The Cyrus Stereo 200 is a rare beast indeed – lauded by many as one of the finest power amplifiers of its generation, the Stereo 200 is remarkable in its poise, absolute grip and astonishing dynamic range. Based on our in-house developed third generation Hybrid Class-D amplification, it is efficiently commanding, yet gloriously musical.You have to hear this amplifier to believe it. A true marvel of Hi-Fi engineering, the Stereo 200 is exceptional in it’s detail, resolution and ability to cope with the very hardest loudspeaker loads.Delivering a herculean 2 x 203 Watts into 6Ω from the half width Cyrus die-cast aluminium chassis, this high-quality power amp provides enormous continuous power and superb dynamics. Pin-point instrument positioning, beautiful balancing and crystal clarity are all signatures of this landmark amplifier. Cyrus’ Stereo 200 power amplifier is the first hybrid power amplifier to be launched from this new platform. By “hybrid” we mean it incorporates a traditional Cyrus power supply design with a low noise toroidal transformer, married with a new, high power, class D output device. This combination provides enormous continuous power and superb dynamics. Specifications : Banana/spade speaker terminals – Yes Chain output – Yes MC-BUS – Yes Analogue – RCA Phono – 1 pair XLR Balanced – 1 pair Trigger – 12V Watts into 6 Ohms – 203 Height – 73 Width – 215 Depth – 360 Weight (kg) – 6.9

Designed to match, engineered for power.New MCA multi-channel amplifiers are Crafted in Canada and perfectly match the new AVM 60 processor & MRX receivers.To complement the NEW AVM 60 A/V Processor, Anthem introduces the new MCA 525, 325 and 225 power amplifiers. Available in 5, 3 and 2-channel configurations, these new MCA amplifiers feature more robust and efficient power and heavy-duty reliability. The new MCA Series delivers lower THD (total harmonic distortion) for more clean, pure sound and lower noise for a supremely quiet background.Like all Anthem products the MCA 525, MCA 325 and MCA 225, designed and Crafted in Canada, are like no other amplifiers in the world: custom low noise high-power toroidal transformers; high-current bipolar output transistors; high-quality filter capacitors; advanced power supply regulators; oversized aluminum heatsinks; custom-designed dual binding posts; and patented auto-on/off circuitry. Superior craftsmanship that is reflected in clean, clear, audiophile-quality sound from top to bottom of the frequency spectrum. Features :225W in 2-ChannelsDelivers lower THD (Total Harmonic Distortion) for cleaner, pure sound and lower noiseCompletely redesigned for improved audio performance and reliabilityHigher current output for lower distortionCosmetic match for AVM 60 A/V Preamplifier-ProcessorImproved Advanced Load Monitoring system8 bipolar output devices per channel for less stress on each deviceLess than 2 watts standby power consumptionCrafted in Canada Specifications :Impedance   8Ω4Ω2Ω 225 W   400 W   600 W   INPUTS / OUTPUTSInputsSingle-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)OutputsSpeaker Binding Posts, Relay Trigger (3.5-mm Mono Jack)SWITCHESFront PanelPower (On/Off)Rear Panel3 On/Off Modes (Trigger, Manual, Auto)THD AT 100Wat 1 kHz0.0010%at 20 kHz0.015%IMD AT 100 WITU-R (19 kHz + 20 kHz)0.0005%SMPTE (60 Hz + 7 kHz)0.002%FREQUENCY RESPONSE, 20 HZ TO 20 KHZopen circuit± 0.1 dB8Ω± 0.1 dB4Ω± 0.1 dB2Ω± 0.2 dBOTHER SPECIFICATIONSSNR, IEC-A, ref. 225 W120 dBPower Bandwidth, -3 dB at 200 W into 8 ohms    90 kHzSlew Rate30 V/μsDamping Factor, 20 Hz to 1 kHz300Channel Separation, 100 Hz to 10 kHz>65 dBInput Impedance (RCA / XLR)10 kΩ / 15 kΩInput Sensitivity, 225 W into 8 Ω1.5 VrmsVoltage Gain29 dBPOWER CONSUMPTION standby  idletypicalhigh outputMCA 525  2.0 W80 W  550 W  1200 WMCA 3251.4 W47 W350 W750 WMCA 2251.0 W35 W240 W500 WDIMENSIONSHeight6-5/8" (16.9 cm)Height with Rackmount Kit   4UWidth17-1/4" (43.9 cm)Depth18-1/8" (46 cm)WEIGHTMCA 52561 lb (27.5 kg)MCA 32543 lb (19.5 kg)MCA 22540 lb (18 kg)POWER REQUIREMENT120 V version:In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.220-240 V version:In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz. 

The Mola Mola Perca is a stereo power amplifier in our well-known half size chassis. Capable of delivering 150 Watts into an 8 Ohm load and doubling down to 300 Watts into 4 Ohm, it will drive any loudspeaker with ease, refinement, and clarity.The ultra-low distortion class A input stages are implemented on a separate board, together with their own high performance voltage regulation. Taking the NCORE® technology from our mother company Hypex Electronics as a reference point we set out to refine our Class D, self-oscillating principle and feedback concept, resulting in our proprietary Mola Mola Trajectum platform which is also applied in the Mola Mola Kula integrated amplifier.To cater to a wider range of applications a new gain selection feature is added which enables switching between 22dB and 28dB. The Mola Mola Perca features selectable balanced and single ended inputs, Furutech binding posts, and an on/off trigger connector.

The SC-600D is a matching amplifier to the SC-600 IW and SC-600 IF/IC subwoofers. The 400 Watt amplifier is digitally tuned for dynamic bass and includes distortion limiting electronics. Twin subwoofers can be installed using a rear-panel pass through on one amp to a second SC-600D. (If you want to use one amp to drive two subwoofers, use the SC-602.)The amplifier comes with a remote control with a one-button, 5-band, Auto-EQ room bass optimization feature, four listening presets, night mode, volume controls, phase control and mute mode. The 2 unit high amplifier is easily rack-mounted and uses conventional speaker wires.The amplifier front panel has duplicate controls as well as a mic jack for the Auto-EQ function, low pass crossover frequency control, 12-volt trigger, IR repeater jack and an RS-232 control input that is Crestron certified. The crossover can be set from 30 Hz to 160 Hz. The phase can be set to 0, 90, 180 or 270 degrees.If you are buying an SC-600 series subwoofer, you must power it with either an SC-600D or SC-602 amplifier to reap the benefits of the model-specific EQ settings; no other amplifier includes these. Specifications:Accessories: Mic, Mic Stand, Remote ControlAmplifier: 400W Dynamic, 200W RMS PowerAuto On/Off: NoColor: BlackDimensions: (H/W/D) 3.6" x 17" x 13" (9 x 43.2 x 33 cm) *Allow two extra inches in depth for wire connectors and power cable. *Includes feet. Feet can be removed for rack mount use. Unit is approximately "two rack units" high.Frequency Response: (+/-3 dB) N/AHiPass Crossover: 80 Hz (6 dB/octave)LoPass Crossover: 30-160 Hz, Defeatable, 24 dB/octave slopePhase Control: 0, 90, 180, 270 DegreesRemovable Grille: NoShipping Weight: 17 lbs. (7.7 kg)Size: LargeWarranty (N. Am.): Two years (electronics - parts & labor)

The SC-1250 amplifier pairs with the SC-IW and SC-IF/IC subwoofers. This amp has 3000 Watts of power to easily drive twin subwoofers. The SC-1250 comes with DSP control, a 7-band Auto-EQ room bass optimization feature, a 12-volt trigger, an IR repeater jack, an RS-232 control port (Creston Certified) and a remote control with listening presets, night mode, volume control, phase control and mute mode.If you are buying an SC series subwoofer, you must power it with an SC-1250 amplifier to reap the benefits of the model-specific EQ settings; no other amplifier includes these. Features:Rack-mount, 1250 watts; RMS amp can drive 2 subsOne touch, 7-band Auto-EQ room bass correctionRemote control with custom listening presets, night mode Specifications:Accessories: Mic, Mic Stand, Remote ControlAmplifier: 3000W Dynamic, 1250W RMS PowerAuto On/Off: NoColor: BlackDimensions: (H/W/D) 3.6" x 17" x 12.5" (9 x 43.2 x 31.8 cm) *Allow two extra inches in depth for wire conectors and detachable power cable. *Includes feet. Feet can be removed for rack mount use. Unit is approximately "two rack units" high.Frequency Response: (+/-3 dB) N/AHiPass Crossover: 80 Hz (6 dB/octave)LoPass Crossover: 30 Hz-160 Hz, Defeatable, 24 dB/octave slopePhase Control: 0, 90, 180, 270 DegreesRemovable Grille: NoShipping Weight: 30 lbs. (22.7 Kg)Size: LargeWarranty (N. Am.): Two years (electronics - parts & labor)

The Electrocompaniet AW250R power amplifier is known for its uncolored and excellent reproduction qualities. From the first note of any familiar recording, you will be captivated by the AW250R and by the musical enjoyment it will give you.The AW250R incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of conventional power supply designs, as well as first class overall circuit design and state-of-the-art components. The AW250R features a balanced link to additional power amplifier(s). Compared to more expensive High-End power amplifiers, with lesser performance, you will truly cherish the AW250R. The Electrocompaniet AW250R features a balanced link to additional amplifier(s) for bi-amping. It can easily be used in bridged mode, delivering up to four times the power. Specifications: Amplifier sectionOutput Impedance (20 Hz - 20 kHz): < 0,008 ohmXLR (balanced) input impedance: 110 kohmInput sensitivity for rated output: 1 VMax. peak current: > 100 ATHD (measured at 1 kHz half power, 8 W): < 0,001 %THD (measured at 1 kHz -1 dB, 8 W): < 0,001 %Noise (measured with both inputs shorted): 400 Hz - 30 kHz : 90 µV, 10 Hz - 30 kHz : 100 µV   Rated output power  8 ohms: 2 x 250 W4 ohms: 2 x 380 W2 ohms: 2 x 625 W1 ohms: 2 x 1100 W Power consumption (no load or signal) 230 W Dimensions  Width 483 mm / 19 inchesDepth 450 mm / 17 inchesHeight 210 mm / 8.2 inchesWeight 39 kg. / 85.8 lbs.

The Electrocompaniet AW180M monaural power amplifier represents the ultimate fidelity in sound reproduction.Audiophiles, recording engineers, record producers and reviewers around the world rely on the AW180M’s faithful reproduction of the original master recording.The stunning capabilities of the Electrocompaniet AW180M cannot be explained – they have to be experienced.The AW180M incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of a conventional power supply, a first class overall circuit design and state-of-the-art components.The Electrocompaniet AW180M features a balanced link to additional amplifier(s) for bi-amping. It can easily be used in bridged mode, delivering up to four times the power. Specifications: Amplifier sectionOutput Impedance: (20 Hz - 20 kHz) < 0,008 ohmRCA (single) input impedance: 220 kohmXLR (balanced) input impedance: 110 kohmInput sensivity for rated output: 1 VMax. peak current: > 100 ATHD (measured at 1 kHz half power, 8 W): < 0,001 %THD (measured at 1 kHz -1 dB, 8 W): < 0,001 %Noise (measured with both inputs shorted): 400 Hz - 30 kHz : 90 µV, 10 Hz - 30 kHz : 100 µV   Rated output power  8 ohms: 250 W4 ohms: 380 W2 ohms: 625 W   Power consumption (no load or signal) 115 W   Dimensions  Width: 215 mm / 8.5 inchesDepth: 470 mm / 18.5 inchesHeight: 288 mm / 11.3 inchesWeight: 22 kg. / 48.4 lbs.

The Electrocompaniet AW400 is a powerful mono amplifier, with a characteristic fast and clean sound. The poweramplifier is analytic, and build for dynamic reproduction for low level as well as high level playback.The Electrocompaniet AW400 power amplifier is based on the design philosophy of the highly acclaimed AW180 M monaural power amplifier.The  AW400 incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of a conventional power supply. First class overall circuit design and state-of-the-art components. Uncompromising sonic and mechanical quality.A 650 VA FTT transformer and a current reservoir of 150.000uF delivers 1 x 400 W of clean and powerful dynamics into an 8 Ohms load. Just like the rest of our power amplifiers, the AW 400 is stable down to 0,5 Ohms. The Electrocompaniet AW 400 features a balanced link to additional amplifier(s) for bi-amping. It can easily be used in bridged mode, delivering up to four times the power. Specifications: Amplifier sectionClipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2%Input Impedance (Fixed): 330 kohmOutput Impedance (20 Hz-20kHz): < 0,01 OhmFrequency response (DC - 65 kHz): - 3 dBInput level for rated output: 1 V RMSMax. peak current: > 150 ATHD(measured at 1 kHzhalf power,8W): < 0,006 %THD (measured at 1 kHz -1 dB, 8 W): < 0,007 %Noise (measured with both inputs shorted): 400 Hz - 30 kHz : 130 µV, DC - 30 kHz : 200 µV Rated output power  8 ohms: 4004 ohms: 7652 ohms: 1010   Power consumption(no load or signal) 230 W Dimensions  Width: 358 mm / 14.1 inchesDepth: 470 mm / 18.5 inchesHeight: 261 mm / 10.2 inchesWeight: 25 kg. / 55 lbs.

Connect to the emotion of live performance through detailed sound, with both amazing control and transparency. This is the M22. While it is easy to find amplifiers that can excel in one or two areas, the M22 is an amplifier that truly does everything well. Wide open-loop bandwidth, extremely low-phase shift, almost non-existent noise, and high current capability all add up to one incredible performance.Wielding NAD’s PowerDrive™ circuit topology, the M22 delivers unbelievable power to any loudspeaker. Distortion and noise become functionally nonexistent and nearly unmeasureable thanks to the M22’s switch mode design, resulting in a clear, vivid sound. Possessing harmonic and intermodulation distortion independent of load, as well as low output impedance uniformly at all audible frequencies, the M22 is a powerhouse unit built to break down barriers to good sound. You just have to hear it to feel it.Hybrid Digital AmplificationThe M22 is using the latest nCore™ amplifier technology licensed from Hypex to provide a nearly ideal amplifier with distortion below measurement, ultra-high damping factor, and unconditional stability with any speaker. Tight, detailed sound with amazing control and transparency gets the best performance available. With nCore, Hypex has refined their UcD concept to new levels of perfection by improving the modulator for more accurate feedback subtraction and PWM generation.The all-discrete driver and output stage have also been improved for lower open-loop THD as well as lower idling losses, normally conflicting requirements with conventional IC driver circuitry. An added control loop incorporating an integrator with adaptive clipping enables 20dB more feedback to be used across the audio band because of its extremely low-phase shift resulting in a dramatic reduction in distortion across the audio band. This is added to UcD’s already amazing characteristics of load invariance and high current capability, common characteristics of great-sounding amplifiers.Effortless PowerEmploying the latest generation of digital PowerDrive™ the M22 offers a minimum of 250W per channel with amazing reserves of dynamic power at lower impedances. The M22 is capable of >300W dynamic power per channel even in 8 ohms, and >600W in 2 ohms. It can effortlessly power any loudspeaker to live performance levels with amazing efficiency and low power consumption. Control for PowerDrive is derived by sensing the average output power, applying a time constant, and then cleanly hard clipping the signal thus limiting it to the rated continuous clipping power over a sustained loading.Perfecting PerformanceThe output stage is only one of several circuits in the amplifier, and each must complement the other to obtain optimal performance. The amp is DC coupled throughout, from input to output, there is no capacitor in the forward signal path. Yet, it has a beneficial 12dB/octave roll-off below 2Hz. It does this using a unique circuit topology that is functionally a forward servo. It is however not a servo in the traditional sense as it does not measure DC at the output and send back a correction signal. Instead part of the input signal is fed to a side chain with a second order low-pass filter. The output of this is subtracted from the forward signal input to the second stage thus rejecting DC.Clean and DynamicThe performance of the entire signal path is critically dependent on the power supply; in this case a well regulated, but not too tight, custom switch mode design. This allows maximum dynamic power, very high current yet with very low distortion. Secondary supplies are individually regulated and decoupled at each opamp for lowest possible noise and maximum dynamic range.

Completely immerse yourself in the moment. With seven channels of massive power, the M27 can effortlessly create a truly realistic surround sound experience that will transport you into the theatre experience. Rated at 180W continuous power per channel, the M27 will provide over 300W dynamic power per channel with all channels driven.The M27 can accept both balanced and single-ended inputs, and features high quality binding posts for speaker connection. Employing technologies such as NAD’s PowerDrive™ allows the M27 to add more dynamics and depth to your favourite movies and songs. Incredibly energy-efficient, the M27 will deliver more than enough power to any system, resulting in a remarkable soundstage.Hybrid Digital AmplificationThe M27 uses the latest nCore™ amplifier technology licensed from Hypex. With nCore, Hypex has refined their UcD concept to new levels of perfection by improving the modulator for more accurate feedback subtraction and PWM generation. The all-discrete driver and output stage have also been improved for lower open-loop THD as well as lower idling losses, normally conflicting requirements with conventional IC driver circuitry.An added control loop incorporating an integrator with adaptive clipping enables 20dB more feedback to be used across the audio band because of its extremely low phase shift resulting in a dramatic reduction in distortion across the audio band. This is added to UcD&#39;s already amazing characteristics of load invariance and high current capability, common characteristics of great sounding amplifiers. Nothing can match the performance of hybrid digital amplifier technology. The sonic character of the M27 only reinforces the story told by the numbers. This is an amazingly powerful and transparent amplifier design that does everything well.Fully Balanced AudioThe same efficient audio interface used by studios provides the highest level of signal integrity with the lowest noise floor. Locking connectors and special interface electronics allow long cable runs without noise pickup or signal loss. All you get is awesome sound without the possibility of noise pickup or interference.Effortless PowerAs our most powerful amplifier ever, the M27 can pump out over 600W into difficult loads to follow complex dynamic peaks in your movies and music. Everything from rim shots to asteroid explosions sound remarkably real and immersive. The M27 has power reserves to meet the demands of the latest high-resolution digital soundtracks. Thanks to the advanced nCore amplifier technology, all this monster power comes at a lot less cost than traditional technology and delivers more power and performance!Legendary PowerDrive™NAD PowerDrive™ circuit delivers very high dynamic power and low impedance drive to accurately control loudspeakers, resulting in remarkably musical and relaxed sound. PowerDrive gives the M27 maximum power no matter what you throw at it—and without the energy drain. NAD&#39;s exclusive SoftClipping™ feature is also included to protect your speakers (and ears) from damaging clipping distortion. Control for PowerDrive is derived by sensing the average output power, applying a time constant, and then cleanly hard clipping the signal thus limiting it to the rated continuous clipping power over a sustained loading. By controlling the power envelope maximum clean power is obtained for every operating condition. ​

The new M8-700m monobloc power amp is fully balanced, and offers a staggering 700 watts per monobloc, with stellar sound quality and technical performance.The M8-700m has extremely low distortion, typically 0.001% at 1 kHz. At 20 kHz distortion is still below 0.005%. Distortion at 50 kHz (a ridiculous and unreasonable measurement, but revealing of the total amplifier performance nonetheless) is 0.02%. At 100 kHz, it is about 0.06%. These extraordinary measurements, and the extremely low high-frequency distortion, are highly significant sonically. The noise ratio of the M8-700m is extremely low at -120 dB A-weighted.The M8-700m has huge power reserves, producing 700 watts RMS into 8 ohms and just on 1300 watts into 4 ohms. It is an absolute powerhouse. The power, low distortion and the extremely low noise contribute to its fabulous, effortless sound.The M8-700m is extremely powerful and dynamic. The sound is sweet, clear and uncoloured. Dynamics are massive and are delivered with instantaneous speed, both starting and stopping. The M8-700m sound stage is huge, wide and deep. It creates large amounts of air and space, and is holographic in its presentation.Similar in size and design package to the M6 500i, the M8-700m offers a compelling combination of fully balanced circuitry, extraordinary technical performance, exquisite sound, intelligent packaging and value for money makes a compelling case.Features:Fully balanced, monster power 700W per monoblocStaggering technical performanceHuge peak current deliveryIncredible load driving ability, will drive any loudspeaker with any cableExcellent design, he-man build qualitySpecifications:Power output: 700 Watts per channel into 8 Ohms (28 dBW)THD(+ noise): 120dBFrequency Response: +0, –1dB, 10Hz to 80kHz2x RCA Phono Line Level1x Line level XLR Balanced1x Trigger input 3.5mm (1/8”) mono jack ±4.5 to ±15V DCDimensions - WxHxD (mm): 440 x 160 x 460Weight (unpacked / packed): 30 kg / 35.5  

The new M8-700m monobloc power amp is fully balanced, and offers a staggering 700 watts per monobloc, with stellar sound quality and technical performance.The M8-700m has extremely low distortion, typically 0.001% at 1 kHz. At 20 kHz distortion is still below 0.005%. Distortion at 50 kHz (a ridiculous and unreasonable measurement, but revealing of the total amplifier performance nonetheless) is 0.02%. At 100 kHz, it is about 0.06%. These extraordinary measurements, and the extremely low high-frequency distortion, are highly significant sonically. The noise ratio of the M8-700m is extremely low at -120 dB A-weighted.The M8-700m has huge power reserves, producing 700 watts RMS into 8 ohms and just on 1300 watts into 4 ohms. It is an absolute powerhouse. The power, low distortion and the extremely low noise contribute to its fabulous, effortless sound.The M8-700m is extremely powerful and dynamic. The sound is sweet, clear and uncoloured. Dynamics are massive and are delivered with instantaneous speed, both starting and stopping. The M8-700m sound stage is huge, wide and deep. It creates large amounts of air and space, and is holographic in its presentation.Similar in size and design package to the M6 500i, the M8-700m offers a compelling combination of fully balanced circuitry, extraordinary technical performance, exquisite sound, intelligent packaging and value for money makes a compelling case.Features:Fully balanced, monster power 700W per monoblocStaggering technical performanceHuge peak current deliveryIncredible load driving ability, will drive any loudspeaker with any cableExcellent design, he-man build qualitySpecifications:Power output: 700 Watts per channel into 8 Ohms (28 dBW)THD(+ noise): 120dBFrequency Response: +0, –1dB, 10Hz to 80kHz2x RCA Phono Line Level1x Line level XLR Balanced1x Trigger input 3.5mm (1/8”) mono jack ±4.5 to ±15V DCDimensions - WxHxD (mm): 440 x 160 x 460Weight (unpacked / packed): 30 kg / 35.5