External Power Supplies

NPX TT is the dedicated power supply for the NVC TT preamplifier, providing it with even cleaner power. It connects to a number of separate elements, including existing Naim products such as NAC-N 272, enabling them to reach their full potential.

Reach a higher level of musical performance with the NPX 300 power supply for the 200 Series sources and preamplifiers, including the NSC 222 streaming preamplifier. NPX 300 deactivates the internal power supply, immediately reducing noise, and provides a superior, cleaner power supply. You can connect several NPX 300 power supplies within the same configuration for an exceptional musical experience.

DescriptionIdeally suited to the DC motors found in the Technodec, Gyrodec and Gyro SE turntables, the Michell HR Power Supply delivers regulated, low noise DC power enabling the Michell turntables to give their best sound quality. Comparing the standard power supply with the Michell HR Power Supply, their is a much lower noise floor so that the silences between notes are more profound. Bass really starts and stops more quickly and therefore enhances the rhythmic quality of music. Sustained notes are more pitch perfect too, giving a feeling of greater realism and transparency.Incorporating Never Connected circuitry, the Michell HR Power Supply is never fully connected to the mains power, therefore the Michell HR Power Supply is completely isolated from mains pollution.The rear of the Michell HR Power Supply provides a speed control, a detachable mains cable allows easy power cord upgrades.

Quiet as a battery. None of the hassle.

Pure silence. Clean power to the maX. With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment. Silence. Personified. The original iFi iPower provides an effective, clean power solution for noise in your system. But why not push your power upgrade to the max with the all-new iFi iPower X?  Our new ultra-low noise AC/DC power supply has be optimised to take  advantage of new knowledge, components and tech in the world of super high-frequency power supply design. Active cancellation The iPower X uses Active Noise Cancellation II  to cancel all incoming EMI or RFI noise. This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones? This is what the iPower X does to your power supply. Improved capacitance As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside. The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower. In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality. Crème de la crème components We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS! In a nutshell, there is no escape for unwanted noise! All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before. Sleek, modern design The iPower X comes dressed in a new cream/beige chassis for a cool, clean look. We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains. And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately). Because we play music too… Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found? Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear. Cleaner sound AND the show goes on! What’s not to like? iPowerX for LED lights Photography? No way. iPowerX can also solve my flickering LED light problem? Yes, a constant current and voltage power supply like iPowerX will ensure that the current supplied to your LED system will remain stable, no matter the fluctuations of the AC power in your wall socket.

Pure silence. Clean power to the maX. With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment. Silence. Personified. The original iFi iPower provides an effective, clean power solution for noise in your system. But why not push your power upgrade to the max with the all-new iFi iPower X?  Our new ultra-low noise AC/DC power supply has be optimised to take  advantage of new knowledge, components and tech in the world of super high-frequency power supply design. Active cancellation The iPower X uses Active Noise Cancellation II  to cancel all incoming EMI or RFI noise. This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones? This is what the iPower X does to your power supply. Improved capacitance As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside. The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower. In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality. Crème de la crème components We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS! In a nutshell, there is no escape for unwanted noise! All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before. Sleek, modern design The iPower X comes dressed in a new cream/beige chassis for a cool, clean look. We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains. And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately). Because we play music too… Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found? Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear. Cleaner sound AND the show goes on! What’s not to like? iPowerX for LED lights Photography? No way. iPowerX can also solve my flickering LED light problem? Yes, a constant current and voltage power supply like iPowerX will ensure that the current supplied to your LED system will remain stable, no matter the fluctuations of the AC power in your wall socket.

Pure silence. Clean power to the maX. With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment. Silence. Personified. The original iFi iPower provides an effective, clean power solution for noise in your system. But why not push your power upgrade to the max with the all-new iFi iPower X?  Our new ultra-low noise AC/DC power supply has be optimised to take  advantage of new knowledge, components and tech in the world of super high-frequency power supply design. Active cancellation The iPower X uses Active Noise Cancellation II  to cancel all incoming EMI or RFI noise. This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones? This is what the iPower X does to your power supply. Improved capacitance As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside. The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower. In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality. Crème de la crème components We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS! In a nutshell, there is no escape for unwanted noise! All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before. Sleek, modern design The iPower X comes dressed in a new cream/beige chassis for a cool, clean look. We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains. And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately). Because we play music too… Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found? Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear. Cleaner sound AND the show goes on! What’s not to like? iPowerX for LED lights Photography? No way. iPowerX can also solve my flickering LED light problem? Yes, a constant current and voltage power supply like iPowerX will ensure that the current supplied to your LED system will remain stable, no matter the fluctuations of the AC power in your wall socket.

Pure silence. Clean power to the maX. With crème de la crème components and tech, the iFi iPower X deep cleans the background noise created in your mains power. Can now be used with a wider variety of equipment. Silence. Personified. The original iFi iPower provides an effective, clean power solution for noise in your system. But why not push your power upgrade to the max with the all-new iFi iPower X?  Our new ultra-low noise AC/DC power supply has be optimised to take  advantage of new knowledge, components and tech in the world of super high-frequency power supply design. Active cancellation The iPower X uses Active Noise Cancellation II  to cancel all incoming EMI or RFI noise. This is the same tech as in active noise-cancelling headphones! Imagine how well these block out cabin noise on a plane compared to regular headphones? This is what the iPower X does to your power supply. Improved capacitance As usual with iFi, every new design means not only improving how it looks on the outside but more importantly, how it functions on the inside. The input capacitance is now 50% larger and the output capacitance is 150% larger when compared to the original iPower. In practical terms, this gives you more filtration, improved dynamics and unsurpassed sound quality. Crème de la crème components We’re using the latest solid organic capacitors for better suppression of high-frequency noise. And the leakage capacitance is some 20x lower than your normal SMPS! In a nutshell, there is no escape for unwanted noise! All in all, the iPower X will give you 20% more power than the original iFi iPower and increased amperage which means it can work with more equipment than ever before. Sleek, modern design The iPower X comes dressed in a new cream/beige chassis for a cool, clean look. We’ve added several openings and the iFi logo backlit by a pleasant cyan LED light. There’s no second guessing when this mini work of art is on and connected to the mains. And as always, we’re giving you freedom. The iPower X is interchangeable with wall pin types across the world (UK/US/EU/AU purchased separately). Because we play music too… Musician? Loving your effect pedals but not so much one when goes down in the middle of a gig? And your spare is nowhere to be found? Our iFi iPower X has a centre negative adapter so you can use this correctly with your gear. Cleaner sound AND the show goes on! What’s not to like? iPowerX for LED lights Photography? No way. iPowerX can also solve my flickering LED light problem? Yes, a constant current and voltage power supply like iPowerX will ensure that the current supplied to your LED system will remain stable, no matter the fluctuations of the AC power in your wall socket.

Quiet as a battery. None of the hassle.

Quiet as a battery. None of the hassle.

The XPS is a simple and effective upgrade to enhance the music-making ability of your Naim Audio source component. As one of our most flexible performers it can be used to upgrade our CDX2 CD player and DAC digital to analogue converter, and it is also suitable for use with our NDS, NDX and ND5 XS network players and HDX hard-disk player/server. Its large toroidal transformer features four separate windings, coupled to six low-noise regulators and benefits from Naim Audio DR voltage regulator technology Features: Four isolated transformer windings with six low-noise DR power regulators - configured as two isolated regulators for digital at +15V, isolated +/-10V for DACs and isolated +/-23V for analogue stages All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s best-ever standards of stable, low-noise power Brushed, black-anodised aluminium chassis plus anti-vibration feet Technology & Craft The Naim Audio XPS is a highly sophisticated power supply with six separately regulated, very low noise outputs, featuring a toroidal transformer and six power regulators. These supplies are branched and re-regulated, some twice in the CD player. The addition of anti-vibration, resonance-controlling feet complement the elegant cast and extruded anti-magnetic chassis protect the sensitive internal components from resonance and microphonic vibration. The XPS was updated in 2012 as a result of a two year project to develop a new discrete regulator (DR) for Naim Audio power supplies. The new Naim Audio DR now features, alongside improvements to the mechanical decoupling and internal layout. These enhancements, developed through intensive listening tests, significantly raise performance and make music even more communicative and enjoyable. Please note  Only new classic series XPS units are compatible with the NDX network player, not ‘Olive’ versions. The old ‘Olive’ XPS is still compatible with CDX and CDS model CD players, the HDX hard disk player and the DAC digital to analogue converter however. Please consult your Naim Audio retailer if you are unsure of compatibility. Finish: Case: Black powder coated Front: Brushed and black anodised Outputs: Power Outputs: ± 22V, ± 10V, 2 x 15V Physical: Shipping Weight: 15.1 kg Shipping Dimensions: 240 x 590 x 500mm Weight: 12.4 kg Dimensions (HxWxD): 87 x 432 x 314mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Supplied with: Supplied with: Burndy Upgrades: Other: Power-Line Lite mains cable (UK denominations only)

Not everyone sees hi-fi as we do. For us, a smooth, stable, low-noise power supply isn’t just desirable: it’s fundamental to proper hi-fi performance. Nowhere is that belief more clearly exemplified than in our reference 555 PS DR, the best power supply in our portfolio. Originally designed to partner our world-class CD555 CD player, the 555 PS can also be used with our NDS and NDX network players, our HDX hard disk player/ server and our DAC digital to analogue converter as well as the CDX2 CD player. Whatever Naim Audio product it partners, the 555 PS DR will improve every aspect of your favourite music. Voices and instruments become clearer and more natural. Perceived dynamic range increases too, while timing – music’s fundamental sense of rhythm and accuracy – snaps into even greater focus. Features: Seven regulated supply voltages, including a separate supply for the CD555 clock circuit Low-resonance case with isolating feet Massive transformer, 40 percent larger than that fitted to the XPS Supplied with Power-Line mains cable as standard All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s best-ever standards of stable, low-noise power Technology & Craft The 555 PS benefits from both our decades of experience and our relentless pursuit of superior sound quality. Its massive transformer, some 40 percent larger than that fitted to our XPS power supply, features five separate windings outputting to seven regulated supply voltages, including an output specifically intended for use with the clock circuitry of our CD555. The 555 PS was updated in 2012 as a result of a two year project to develop a new discrete regulator (DR) for Naim Audio power supplies. The new Naim Audio DR now features, alongside improvements to the wire routing, mechanical decoupling and internal layout. These enhancements, developed through intensive listening tests, significantly raise performance and make music even more communicative and enjoyable. Finish: Case: Brushed and black anodised Front: Brushed and black anodised Outputs: Power Outputs: ± 22V, ± 10V, 12V, 2 x 15V Physical: Shipping Dimensions: 240 x 590 x 500 mm Weight: 15.7 kg Dimensions (HxWxD): 87 x 432 x 314 mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Supplied with: Supplied with: Power-Line

The compact NAPSC comes as standard with the NAC 282 preamplifier and it can also be used as an upgrade for the NAC 202 or to power the HeadLine headphone amplifier. It’s a small but important link in the chain in extracting the highest levels of musical performance from these hi-fi components.   Features: 18V power output Bead-blasted, black-anodised aluminium chassis plus anti-vibration feet Convenient and compact size at just 12cm wide Technology & Craft Controlling the power supply element of the system has been a mainstay of Naim Audio engineering since the early days. Just as paying close attention to every detail in design – no matter how small or seemingly insignificant it may seem – is one of the ways in which we ensure high quality musical performance. The NAPSC power supply is an example of this philosophy in action. It comes as standard with the NAC 282 preamplifier, supplying smooth low-noise power for the digital circuitry, leaving the preamp to concentrate on doing its main job of managing the signal. When paired with the NAC 202 it does the same job by upgrading the existing internal power supply section to remove the electrically noisy work from the box entirely. In both applications this attention to detail reaps rewards in improved musical clarity and reduced noise. Finish: Case: Black powder coated Front: Black powder coated Outputs: Power Outputs: 18V Physical: Shipping Weight: 2.7 kg Shipping Dimensions: 110 x 250 x 330 mm Weight: 2.1 kg Dimensions (HxWxD): 57 x 121 x 187 mm Power: Mains Supply: 100V-120V, 220-240V; 50 or 60Hz Upgrades: Other: Power-Line

The XPS is a simple and effective upgrade to enhance the music-making ability of your Naim Audio source component. As one of our most flexible performers it can be used to upgrade our CDX2 CD player and DAC digital to analogue converter, and it is also suitable for use with our NDS, NDX and ND5 XS network players and HDX hard-disk player/server. Its large toroidal transformer features four separate windings, coupled to six low-noise regulators and benefits from Naim Audio DR voltage regulator technology Features: Four isolated transformer windings with six low-noise DR power regulators - configured as two isolated regulators for digital at +15V, isolated +/-10V for DACs and isolated +/-23V for analogue stages All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s best-ever standards of stable, low-noise power Brushed, black-anodised aluminium chassis plus anti-vibration feet Technology & Craft The Naim Audio XPS is a highly sophisticated power supply with six separately regulated, very low noise outputs, featuring a toroidal transformer and six power regulators. These supplies are branched and re-regulated, some twice in the CD player. The addition of anti-vibration, resonance-controlling feet complement the elegant cast and extruded anti-magnetic chassis protect the sensitive internal components from resonance and microphonic vibration. The XPS was updated in 2012 as a result of a two year project to develop a new discrete regulator (DR) for Naim Audio power supplies. The new Naim Audio DR now features, alongside improvements to the mechanical decoupling and internal layout. These enhancements, developed through intensive listening tests, significantly raise performance and make music even more communicative and enjoyable. Please note  Only new classic series XPS units are compatible with the NDX network player, not ‘Olive’ versions. The old ‘Olive’ XPS is still compatible with CDX and CDS model CD players, the HDX hard disk player and the DAC digital to analogue converter however. Please consult your Naim Audio retailer if you are unsure of compatibility. Finish: Case: Black powder coated Front: Brushed and black anodised Outputs: Power Outputs: ± 22V, ± 10V, 2 x 15V Physical: Shipping Weight: 15.1 kg Shipping Dimensions: 240 x 590 x 500mm Weight: 12.4 kg Dimensions (HxWxD): 87 x 432 x 314mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Supplied with: Supplied with: Burndy Upgrades: Other: Power-Line Lite mains cable (UK denominations only)

It may be small, but the HiCap’s talent for maximising your system’s musicality should not be underestimated. A compact power supply partner for almost all of our preamplifiers plus our phono stages and active crossover components, its large toroidal transformer and generous, high-quality smoothing capacitors ensure excellent performance and value. NAC 282 preamplifier owners can enjoy even better performance by adding an additional, second HiCap to their system. Features: Two 24V power outputs All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s best-ever standards of stable, low-noise power Bead-blasted, black-anodised aluminium chassis plus anti-vibration, resonance controlling feet Technology & Craft Each of the power outputs on the HiCap use Naim Audio's specially designed discrete regulators for optimum performance. The design can be used to power all of the Naim Audio phono stage preamplifier, active crossovers and preamplifiers except the NAC 552 and NAC 252. In the case of the NAC 282 preamplifier a second HiCap may be used, bringing further improvements. The addition of anti-vibration, resonance-controlling feet complements the elegant new cast and extruded anti-magnetic chassis to protect the sensitive internal components from resonance and microphonic vibration.  The HiCap was updated in 2012 as a result of a two year project to develop a new discrete regulator (DR) for Naim Audio power supplies. The new Naim Audio DR now features, alongside improvements to the wire routing, mechanical decoupling and internal layout. These enhancements, developed through intensive listening tests, significantly raise performance and make music even more communicative and enjoyable. Finish: Case: Black powder coated Front: Bead blasted and black anodised Outputs: Power Outputs: 2 x 24V Physical: Shipping Weight: 9.5 kg Shipping Dimensions: 210 x 280 x 410 mm Weight: 7.35 Dimensions (HxWxD): 87 x 207 x 314 mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Supplied with: Supplied with: SNAIC Upgrades: Other: Power-Line Lite mains cable (UK denominations only)

As iconic as it is widely acclaimed, the SuperCap DR is a Naim Audio classic, capable of powering every preamplifier in our range except for the NAC-N 172 XS and our flagship, the NAC 552. Its substantial toroidal transformer and high-quality smoothing capacitors combine to ensure improved timing, clarity and dynamic range from your favourite music. Upgraded with our new DR voltage regulator, this timeless component remains one of the most well know and oft-employed power supplies in our range, and for good reason.    Features: 13 x 24V outputs, 2 x 12V output  All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s best-ever standards of stable, low-noise power Brushed, black-anodised aluminium chassis Technology & Craft Each of the multiple power outputs on the SuperCap DR uses Naim Audio's specially designed discrete regulators for optimum performance. The SuperCap DR can be used to power all of the Naim Audio preamplifier (except the NAC 552 and NAC-N 172 XS), Superline phono stage and active crossovers, and is the only choice for supplying power to the NAC 252 preamplifier. Its anti-vibration, resonance-controlling feet complement the elegant new cast and extruded anti-magnetic chassis to protect the sensitive internal components from resonance and microphonic vibration. The SuperCap DR was updated in 2012 as a result of a two year project to develop a new discrete regulator (DR) for Naim Audio power supplies. The new Naim Audio DR now features, alongside improvements to the wire routing, mechanical decoupling and internal layout. These enhancements, developed through intensive listening tests, significantly raise performance and make music even more communicative and enjoyable. Finish: Case: Black powder coated Front: Brushed and black anodised Outputs: Power Outputs: 13 x 24V, 2 x 12V Physical: Shipping Weight: 14.2 kg Shipping Dimensions: 240 x 590 x 500 mm Weight: 11.6 kg Dimensions (HxWxD): 87 x 432 x 314 mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Upgrades: Other: Power-Line Lite mains cable (UK denominations only)

Use an iPower to replace your regular power supply for clean, noise pollution free power. Upgrade to the iFi iPower to feed your system’s circuits with clean, audiophile grade power and address issues at both the output and input stages. The iPower use Active Noise Cancellation+ to cancel all incoming EMI or RFI noise. It is at least 10x quieter than previous iFi power adapters, 20x quieter than audiophile linear power supplies and 1000x quieter than standard SMPS wall adapters. It has 4 barrel-tip adapters which means it’s compatible with all wall pin types across the world (UK/US/EU/AU). A true-globe trotter. It also comes with USB and centre negative adapters. Add the iPower into your system and you’ll notice music come back to life. It can add in detail originally lost through conventional power supplies. Get your power back with the iFi iPower. It works with virtually any DC powered device and comes in 5, 9, 12 and 15 volts. Just check the correct voltage and away you go. Clean, audiophile grade power.

Use an iPower to replace your regular power supply for clean, noise pollution free power. Upgrade to the iFi iPower to feed your system’s circuits with clean, audiophile grade power and address issues at both the output and input stages. The iPower use Active Noise Cancellation+ to cancel all incoming EMI or RFI noise. It is at least 10x quieter than previous iFi power adapters, 20x quieter than audiophile linear power supplies and 1000x quieter than standard SMPS wall adapters. It has 4 barrel-tip adapters which means it’s compatible with all wall pin types across the world (UK/US/EU/AU). A true-globe trotter. It also comes with USB and centre negative adapters. Add the iPower into your system and you’ll notice music come back to life. It can add in detail originally lost through conventional power supplies. Get your power back with the iFi iPower. It works with virtually any DC powered device and comes in 5, 9, 12 and 15 volts. Just check the correct voltage and away you go. Clean, audiophile grade power.

Use an iPower to replace your regular power supply for clean, noise pollution free power. Upgrade to the iFi iPower to feed your system’s circuits with clean, audiophile grade power and address issues at both the output and input stages. The iPower use Active Noise Cancellation+ to cancel all incoming EMI or RFI noise. It is at least 10x quieter than previous iFi power adapters, 20x quieter than audiophile linear power supplies and 1000x quieter than standard SMPS wall adapters. It has 4 barrel-tip adapters which means it’s compatible with all wall pin types across the world (UK/US/EU/AU). A true-globe trotter. It also comes with USB and centre negative adapters. Add the iPower into your system and you’ll notice music come back to life. It can add in detail originally lost through conventional power supplies. Get your power back with the iFi iPower. It works with virtually any DC powered device and comes in 5, 9, 12 and 15 volts. Just check the correct voltage and away you go. Clean, audiophile grade power.

Optional Linear Power Supply upgrade for improved sound quality in matching chassis.Backwards compatible with the ZENmini MkII. Features: Mains Supply 230V AC / 115V AC - Internal Linear Power Supply DC Output DC 16V, 3A maximum Connector 2.5 x 5.5mm barrel plug Dimensions 74 x 214 x 240 mm (H x W x D) Weight 4 Kg In the box Innuos ZENmini LPSU DC Connection cable with barrel plug Mains Cable Getting Started leaflet

Slimline and versatile power. Designed to complement our XS range, the FlatCap XS is a dual-rail, dual-output power supply that powers not just one, but two Naim Audio components if required. For example, an XS Series owner could add a FlatCap XS to enhance the performance of both a CD5 XS and a NAC 152 XS, and so enjoy all the improvements to clarity, dynamics and timing you’d expect from any Naim Audio power supply upgrade. It’s a logical, high-value and highly effective upgrade path – just as you’d expect from Naim Audio. Features Dual-rail power supply with four 24V power outputs Four low-noise regulators Black-anodised chassis with brushed front panel plus anti-vibration feet Technology & Craft The FlatCap XS transformer has two separate secondary windings to isolate each of the dual supplies from the other. It includes four Naim Audio-tested and selected low-noise regulators to achieve its exceptional performance. Finish Case: Black powder coated Front: Brushed and black anodised Outputs Power Outputs: 4 x 24V Physical Shipping Weight: 7.6 kg Shipping Dimensions: 200 x 590 x 500 mm Weight: 5.5 kg Dimensions (HxWxD): 70 x 432 x 301 mm Power Mains Supply: 100V, 115V, 230V; 50 or 60Hz Supplied with Supplied with: SNAIC Upgrades Other: Power-Line Lite mains cable (UK denominations only)

Extremely Low Noise Power Supply When it comes to high audio performance, the quality of the current being delivered to a hi-fi unit is overly important. Noise in the supply current may be injected into the sound or couple with critical circuits, like the clock, leading to less-than-optimal performance. A low noise supply is therefore mandatory to squeeze the last bit of sound quality out of your DAC or amplifier. Of course, a low noise design involves quality, room occupation and cost way beyond those acceptable in budget designs. That’s why M2Tech offers the Van Der Graaf MkII: users who purchased the Young MkIII and the Nash Phono Preampmplifier may later allocate some more budget to increase their performance by adding the Van Der Graaf MkII. Extremely easy to use, its benefits go from the higher stability of the clocks (with related increased soundstage sharpness and details rendition) to a darker background due to the lower noise floor. The Van Der Graaf MkII remembers the order user followed to activate the four outputs: when switching off, it follows the reverse order and remember the activation order upon subsequient switch-on. The Van Der Graaf MkII is provided with an IR receiver and is able to trap the ON/OFF commands from the remote controllers of all other Rockstars Series units. This allows user to power all the attached units on and off with a single command with the right switching order. Specifications : Input:90-265VAC, 50/60Hz (VDE socket) Outputs:2 x 9VDC or 15VDC (5.5/2.1mm jack)2 x 5VDC:+15VDC:-15VDC (4-pin XLR) Total output power:50W Residual noise:3uVrms (5Hz to 22kHz) Power consumption:60VA Size:200x200x50mm (wxdxh) Weight:net 3kg (with ancillaries)gross 3.5g

The Neo PSU is an advanced turntable power supply providing user controllable fine speed adjustment, advanced anti-vibration motor circuit and the convenience of electronic speed change.The Neo will make a welcome addition to any compatible Rega turntable by reducing motor noise, improving speed stability and rotational speed accuracy.The Neo PSU is compatible with the following Rega turntable models:P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with our aftermarket 24v motor upgrade kit. Using the same DSP (digital signal processing) generator found in the RP10 the Neo is built upon a high stability crystal. The Neo features an advanced anti vibration circuit, fine motor speed adjustment and the convenience of electronic speed change.The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst will producing a near perfect sinusoidal waveform to drive the 24v motor.  Technical Specifications:Output to motor bi-phase = 24 V AC protected by resettable fuse.Power consumption = 7.2 WVoltage = 24 V ACPower supply: Rega PS1 only.Speed control step size = 0.01 RPM.PS1 (UK)Input 230 V ~ 50 Hz 0.07 AOutput 24 V ~ 350 mA ACPS1 (EU - Euro 2 pin)Input 230 V ~ 50 Hz 0.07 AOutput 24 V ~ 350 mA ACPS1 (American)Input 115-120 V ~ 60 HzOutput 24 V ~ 350 mA AC

The Evo Supply Two is a very low noise 9V power supply dedicated to the Evo Two Series products. It is provided with three outputs which deliver clean current from a low noise, discrete components regulator. Outputs are switched with a rele operated by a button on the front panel. Overcurrent protection is included on each output.The very-low-noise regulator features the same basic design as the Van Der Graaf, ensuring a residual noise which rivals that of the best high current batteries, with the extra bonus of a very long trouble-free life.Χαρακτηριστικά:The Evo Supply Two has enough current capability to power any combination of Evo Two or legacy Evo products. A carefully thought design which allows for exceptional performance from the lightest load up to the rated current delivery.The output polyswitch fuse avoids damages even in case of continuous short-circuit at one or more outputs.