XLR Interconnect cables

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shielding / Filtered ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shielding / Filtered ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shielding / Filtered ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shielding / Filtered ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shielding / Filtered ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shieldingConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shieldingConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shieldingConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: 810 / 180 / 1mm SilverConductor Structure: AsymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesInsulation: Triple Insulation on AirShielding: Partial shielding on Air and Dual polarization / Mass filtering by Silver Coil and SelfConnectors: EH200 Esprit ConnectorsPlating: 20 microns Silver / Pure copper multiplayer plating

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shieldingConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shieldingConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shielding / Filtered ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shieldingConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shielding / Filtered ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistShielding: PartialConnectors: Esprit Connectors

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistShielding: PartialConnectors: Esprit Connectors

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shieldingConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistShielding: PartialConnectors: Esprit Connectors

No. of strands: Brins 0,24Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial shieldingConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistShielding: PartialConnectors: Esprit Connectors

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistPolarization: YesShielding: Partial ScreenConnectors: Esprit ConnectorsPlating: Silver Plated on pure copper

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistShielding: PartialConnectors: Esprit Connectors

No. of strands: Brins 0,19Conductor Structure: SymmetricalDielectric Structure: Asymmetrical TwistShielding: PartialConnectors: Esprit Connectors

Meaning “Big River” in Athabaskan, the Yukon River starts with the Llewellyn Glacier as its source in British Columbia, and empties into Alaska’s Bering Sea. It may have been the first immigration route for North America’s first indigenous humans, and was certainly the principle means of travel during the 1896-1903 Klondike Gold Rush. Paddle-wheel riverboats continued as the dominant form of transportation along the river until the 1950s when the Klondike Highway was completed. King Salmon from the Yukon River remain an elusive, but prized delicacy. SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS Solid conductors prevent both electrical and magnetic interaction strand-to-strand interaction, major sources of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the fields within a conductor, and for the magnetic fields that extend outside the conductor. The astonishingly smooth and pure surface of all AudioQuests’s Perfect-Surface metals nearly eliminates harshness and greatly increases clarity compared to lesser materials. Extremely high-purity Perfect-Surface Copper+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers. POLYETHYLENE AIR-TUBE INSULATION Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials. TRIPLE-BALANCED GEOMETRY (SEPARATE GROUND-REFERENCE CONDUCTOR) Our Triple-Balanced Geometry uses a separate ground-reference conductor, so the cable's shield is never used as an inferior conductor. Whether prepared with RCA or XLR plugs, the cable's three conductors ensure that the positive and negative signals have equally superior, low-distortion conducting paths. CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS) It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. COLD-WELDED, HANGING-SILVER DIRECTLY OVER PURE PURPLE COPPER TERMINATIONS Cold-Welded, Hanging-Silver Directly Over Pure Purple Copper Terminations

Καλώδιο μικροφώνου 5m Mogami 2534 τερματισμένο με επίχρυσους connectors της Neutrik, από την ίδια την Mogami στην Ιαπωνία.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Grimm Audio TPR ‘Twisted Pair Reference’ cables are developed with physics in mind. Their design focuses on high RF immunity and low microphonics. The perfect symmetry of the cross-section and heavy shielding contribute to high RF immunity. Low microphonics is provided by a special interface layer under the shield and other construction details.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Pro Series - Studio & Live XLR Cable 50' (15.2 meters)

Pro Series - Studio & Live XLR Cable 25' (7.6 meters)

Pro Series - Studio & Live XLR Cable 20' (6.1 meters)

Pro Series - Studio & Live XLR Cable 15' (4.6 meters)

Pro Series - Studio & Live XLR Cable 10' (3.0 meters)

Pro Series - Studio & Live XLR Cable 6' (1.8 meters)

Pro Series - Studio & Live XLR Cable 3' (0.9 meters)

Oasis 8’s new Tri DNA Helix design advances the art of musical preservation in both interconnect and microphone applications. This extremely flexible and quiet cable reveals musical details and dynamics far beyond the capabilities of previous cables in its price range. DESIGN: Tri DNA Helix RCA CONDUCTORS: 3 (12 strand groups)     Gauge: 21AWG |  0.4 sq. mm XLR CONDUCTORS: 3 (12 strand groups)    Gauge: 24AWG |  0.2 sq. mm CONDUCTOR MATERIAL: Oxygen-Free Copper INSULATION: Composilex 3 PLUG CONTACTS: Silver-clad OFC

Oasis 8’s new Tri DNA Helix design advances the art of musical preservation in both interconnect and microphone applications. This extremely flexible and quiet cable reveals musical details and dynamics far beyond the capabilities of previous cables in its price range. DESIGN: Tri DNA Helix RCA CONDUCTORS: 3 (12 strand groups)     Gauge: 21AWG |  0.4 sq. mm XLR CONDUCTORS: 3 (12 strand groups)    Gauge: 24AWG |  0.2 sq. mm CONDUCTOR MATERIAL: Oxygen-Free Copper INSULATION: Composilex 3 PLUG CONTACTS: Silver-clad OFC

Oasis 8’s new Tri DNA Helix design advances the art of musical preservation in both interconnect and microphone applications. This extremely flexible and quiet cable reveals musical details and dynamics far beyond the capabilities of previous cables in its price range. DESIGN: Tri DNA Helix RCA CONDUCTORS: 3 (12 strand groups)     Gauge: 21AWG |  0.4 sq. mm XLR CONDUCTORS: 3 (12 strand groups)    Gauge: 24AWG |  0.2 sq. mm CONDUCTOR MATERIAL: Oxygen-Free Copper INSULATION: Composilex 3 PLUG CONTACTS: Silver-clad OFC

Oasis 8’s new Tri DNA Helix design advances the art of musical preservation in both interconnect and microphone applications. This extremely flexible and quiet cable reveals musical details and dynamics far beyond the capabilities of previous cables in its price range. DESIGN: Tri DNA Helix RCA CONDUCTORS: 3 (12 strand groups)     Gauge: 21AWG |  0.4 sq. mm XLR CONDUCTORS: 3 (12 strand groups)    Gauge: 24AWG |  0.2 sq. mm CONDUCTOR MATERIAL: Oxygen-Free Copper INSULATION: Composilex 3 PLUG CONTACTS: Silver-clad OFC