Centre Speakers

Our Bronze C150 has been designed to bring movie sound into your home. It gives a controlled yet powerful audio presentation to immerse you in the action. And, the cabinet’s discreet form ensures it looks good wherever you position it. The Bronze C150 partners left and right speakers and is designed to be positioned at the centre of the home cinema configuration. The 25 mm C-CAM Gold Dome Tweeter and two 5 1/2" C-CAM Mid-Bass drivers have exceptional dispersion abilities to guarantee a detailed wide-screen listen with seamless front soundstage action and articulate dialogue. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Sealed cabinet – for accurate performance when installed in restricted voids or close to a wall Compact in size, fits easily on cabinets and shelves Specifications: System Format: 2-Way Frequency Response (-6 dB): 83 – 25,000 Hz (Free field), 66 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.3 ohms Maximum SPL: 109 dBA (each) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 30 — 120 W Bass Alignment: Sealed cabinet Crossover Frequency: 2,700 Hz Drive Unit Complement: 2 x 51/2" C-CAM mid-range driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 166 x 451 x 225 mm (69/16 x 173/4 x 88/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): N/A Weight (each): 7 kg (15 lb 7 oz) Sold As: Single Unit

Our Bronze C150 has been designed to bring movie sound into your home. It gives a controlled yet powerful audio presentation to immerse you in the action. And, the cabinet’s discreet form ensures it looks good wherever you position it. The Bronze C150 partners left and right speakers and is designed to be positioned at the centre of the home cinema configuration. The 25 mm C-CAM Gold Dome Tweeter and two 5 1/2" C-CAM Mid-Bass drivers have exceptional dispersion abilities to guarantee a detailed wide-screen listen with seamless front soundstage action and articulate dialogue. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Sealed cabinet – for accurate performance when installed in restricted voids or close to a wall Compact in size, fits easily on cabinets and shelves Specifications: System Format: 2-Way Frequency Response (-6 dB): 83 – 25,000 Hz (Free field), 66 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.3 ohms Maximum SPL: 109 dBA (each) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 30 — 120 W Bass Alignment: Sealed cabinet Crossover Frequency: 2,700 Hz Drive Unit Complement: 2 x 51/2" C-CAM mid-range driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 166 x 451 x 225 mm (69/16 x 173/4 x 88/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): N/A Weight (each): 7 kg (15 lb 7 oz) Sold As: Single Unit

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The DALI OBERON VOKAL is designed to be the perfect match with any of the speakers in the OBERON series to form a complete surround system. Delivering a precise, clear and detailed sound performance for both your movie as well concert sound track. The placement of the front-facing bass port on the front baffle supports different placement options in your TV furniture.  We have united the best elements from our current speakers and brought them together in the OBERON VOKAL to deliver on audio quality, looks and versatility. The OBERON VOKAL houses an oversized 29 mm soft dome tweeter together with 2 x 5.25" SMC based wood fibre woofers - supported by the front-facing bass port, which makes the center speaker easy to place. For these reasons, it's the perfect choice for surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 89.5 Nominal Impedance [ohms]: 4 Maximum SPL [dB]: 109 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,600 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 46 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 0 - 50 Dimensions With Base (HxWxD) [mm]: 161 x 441 x 295 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 7.45

The RP-404C center channel speaker delivers accurate-to-live acoustics that take your movies and music to a whole new level. Quad 4" copper-spun Cerametallic™ woofers offer both incredible sound and style. Features: 1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn Quad 4" Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Premium Scratch Resistant Ebony and Walnut Finishes Strong, Flexible Removable Magnetic Grille Dimensions: 5.7” x 26” x 13” HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the RP-404C center channel speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible. HORN ANATOMYKlipsch Reference Premiere series speakers feature a compressed molded silicon face thats matted to the 90x90 Tractrix horn to reduces horn resonance for a smoother frequency response. Klipsch computer modeled phase plugs acts as a mechanical filter to further ensure a smooth, flat frequency response while protecting the tweeter from damage. ALL-NEW VENTED TWEETERA vented tweeter design reduces standing waves behind the tweeter diaphragm for a smoother high frequency reproduction. The titanium tweeter diaphragm's light weight yet rigid composition exceeds the performance of aluminum, polymer or silk tweeters. Klipsch award-winning Linear Travel Suspension technology leverages a piston motion of the titanium diaphragm that lowers distortion and delivers real-to-life sound. A ceramic magnet housing provides premium performance, Klipsch Reference Premiere tweeters set the standard in acoustic reproduction. CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the RP-404C center channel speaker's signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency. WOOFER ANATOMYKlipsch Cerametallic™ cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity. Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution. REAR TRACTRIX® PORTThe rear Tractrix port of the Reference Premiere center channel speakers is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. FINISHED TO PERFECTIONThe RP-404C ebony and walnut finishes boast satin painted baffles with a scratch resistant design for an elegant audio solution to your home theater system. Strong, flexible, magnetic grilles provide protection and a sleek aesthetic to compliment your home's decor. Specifications : FREQUENCY RESPONSE 59-25kHz +/- 3dB SENSITIVITY 97dB @ 2.83V / 1m POWER HANDLING (CONT/PEAK) 125W/500W NOMINAL IMPEDANCE 8 ohms compatible CROSSOVER FREQUENCY 500Hz/1500Hz HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn LOW FREQUENCY DRIVER Quad 4” Cerametallic™ Cone Woofers ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single Binding Posts HEIGHT 5.7” (14.39 cm) WIDTH 26.0” (66.04 cm) DEPTH 13” (33.02 cm) WEIGHT 28 lb (12.7 kg) FINISH Ebony, Walnut, Piano Black ACCESSORIES Rubber Feet (4) BUILT FROM 2018

The RP-404C center channel speaker delivers accurate-to-live acoustics that take your movies and music to a whole new level. Quad 4" copper-spun Cerametallic™ woofers offer both incredible sound and style. Features: 1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn Quad 4" Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Premium Scratch Resistant Ebony and Walnut Finishes Strong, Flexible Removable Magnetic Grille Dimensions: 5.7” x 26” x 13” HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the RP-404C center channel speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible. HORN ANATOMYKlipsch Reference Premiere series speakers feature a compressed molded silicon face thats matted to the 90x90 Tractrix horn to reduces horn resonance for a smoother frequency response. Klipsch computer modeled phase plugs acts as a mechanical filter to further ensure a smooth, flat frequency response while protecting the tweeter from damage. ALL-NEW VENTED TWEETERA vented tweeter design reduces standing waves behind the tweeter diaphragm for a smoother high frequency reproduction. The titanium tweeter diaphragm's light weight yet rigid composition exceeds the performance of aluminum, polymer or silk tweeters. Klipsch award-winning Linear Travel Suspension technology leverages a piston motion of the titanium diaphragm that lowers distortion and delivers real-to-life sound. A ceramic magnet housing provides premium performance, Klipsch Reference Premiere tweeters set the standard in acoustic reproduction. CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the RP-404C center channel speaker's signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency. WOOFER ANATOMYKlipsch Cerametallic™ cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity. Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution. REAR TRACTRIX® PORTThe rear Tractrix port of the Reference Premiere center channel speakers is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. FINISHED TO PERFECTIONThe RP-404C ebony and walnut finishes boast satin painted baffles with a scratch resistant design for an elegant audio solution to your home theater system. Strong, flexible, magnetic grilles provide protection and a sleek aesthetic to compliment your home's decor. Specifications : FREQUENCY RESPONSE 59-25kHz +/- 3dB SENSITIVITY 97dB @ 2.83V / 1m POWER HANDLING (CONT/PEAK) 125W/500W NOMINAL IMPEDANCE 8 ohms compatible CROSSOVER FREQUENCY 500Hz/1500Hz HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn LOW FREQUENCY DRIVER Quad 4” Cerametallic™ Cone Woofers ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single Binding Posts HEIGHT 5.7” (14.39 cm) WIDTH 26.0” (66.04 cm) DEPTH 13” (33.02 cm) WEIGHT 28 lb (12.7 kg) FINISH Ebony, Walnut, Piano Black ACCESSORIES Rubber Feet (4) BUILT FROM 2018

Get crystal-clear sound for your movie dialogue and music lyrics with the incredible acoustics from the R-52C center channel speaker. Our proprietary Tractrix® horn-loaded technology gives you a lifelike, front-row listening experience unlike any other. Features: 1" Aluminum LTS tweeter 90x90 Square Tractrix Horn Dual 5.25" Spun-Copper IMG Woofers Strong, Flexible Removable Magnetic Grille Closed Back Design for Flexible Placement Dimensions: 7.3" x 18.75" x 7.6" TRACTRIX® HORN TECHNOLOGYKlipsch exclusive 90x90º Tractrix® horn technology ensures that the R-52C high frequency energy is aimed at the listener and reduces artificial reverb or filtering caused by indirect sound bouncing off of walls. Using this proprietary focused technology gives you the best clarity, dynamics, and detail from your movies and music. LINEAR TRAVEL SUSPENSION TWEETERWITH KAPTON® SUSPENSIONKlipsch exclusive Linear Travel Suspension (LTS) aluminum tweeter minimizes distortion for enhanced, detailed performances. Using Kapton®, an extremely light and rigid material, in the tweeter suspension provides high efficiency and improve resolution and detail. LTS tweeters are a hallmark of Klipsch speakers, making them some of the best speakers in the world. SPUN COPPER IMG WOOFERSInjection Molded Graphite (IMG) woofer cones are exceptionally light while being extremely rigid – providing remarkable low frequency response, with minimal cone breakup and distortion. When paired with the Tractrix Horn-Loaded LTS Tweeter, it provides speaker efficiency highest in its class. SLEEK DESIGNExposed fasteners, low profile magnetic grilles and a scratch-resistant, textured wood grain vinyl give the R-51M bookshelf speakers a polished, modern appearance. HIGH QUALITY CABINET + CLOSED DESIGNReinforced MDF construction reduces cabinet vibration for less audible coloration and improved sonic accuracy - giving you the ultimate listening experience that's built to last. The closed back design of the R-52C gives you flexible placement options with optimal bass response regardless of your entertainment system shelving. Specifications : FREQUENCY RESPONSE 89Hz - 21kHz +/- 3dB SENSITIVITY 95 dB @ 2.83V/1M POWER HANDLING (CONT/PEAK) 100W/400W NOMINAL IMPEDANCE 8 ohms Compatible CROSSOVER FREQUENCY 1,630 Hz HIGH FREQUENCY DRIVER 1” Aluminum LTS tweeter mated to a 90 x 90 square Tractrix® Horn LOW FREQUENCY DRIVER Dual 5.25” spun-copper IMG woofers ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Sealed INPUTS Single Gold Plated Binding Posts HEIGHT INCHES (MM) 7.3” (185 mm) WIDTH INCHES (MM) 18.75” (476 mm) DEPTH INCHES (MM) 7.6” (194 mm) PRODUCT WEIGHT LBS (KG) 7 lbs (3.2 kg) FINISHES Black Textured Wood Grain Vinyl INCLUDED ACCESSORIES Rubber Feet (4) BUILT FROM 2018

The Klipsch Reference Premiere RP-504C center channel speaker brings movie dialogue and music lyrics to life. Four 5.25" Cerametallic™ woofers and a hybrid Tractrix® horn emit lifelike, front row sound. Features: 1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn Quad 5.25" Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Premium Scratch Resistant Ebony and Walnut Finishes Strong, Flexible Removable Magnetic Grille Dimensions: 6.81” x 31.13” x 14.46” HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the RP-504C center channel speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible. HORN ANATOMYKlipsch Reference Premiere series speakers feature a compressed molded silicon face thats matted to the 90x90 Tractrix horn to reduces horn resonance for a smoother frequency response. Klipsch computer modeled phase plugs acts as a mechanical filter to further ensure a smooth, flat frequency response while protecting the tweeter from damage. ALL-NEW VENTED TWEETERA vented tweeter design reduces standing waves behind the tweeter diaphragm for a smoother high frequency reproduction. The titanium tweeter diaphragm's light weight yet rigid composition exceeds the performance of aluminum, polymer or silk tweeters. Klipsch award-winning Linear Travel Suspension technology leverages a piston motion of the titanium diaphragm that lowers distortion and delivers real-to-life sound. A ceramic magnet housing provides premium performance, Klipsch Reference Premiere tweeters set the standard in acoustic reproduction. CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the RP-504C center channel speaker's signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency. WOOFER ANATOMYKlipsch Cerametallic™ cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity. Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution. REAR TRACTRIX® PORTThe rear Tractrix port of the Reference Premiere center channel speakers is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. FINISHED TO PERFECTIONThe RP-504C ebony and walnut finishes boast satin painted baffles with a scratch resistant design for an elegant audio solution to your home theater system. Strong, flexible, magnetic grilles provide protection and a sleek aesthetic to compliment your home's decor. Specifications : FREQUENCY RESPONSE 58-25kHz +/- 3dB SENSITIVITY 97dB @ 2.83V / 1m POWER HANDLING (CONT/PEAK) 150W/600W NOMINAL IMPEDANCE 8 ohms compatible CROSSOVER FREQUENCY 500Hz/1500Hz HIGH FREQUENCY DRIVER 1” Titanium LTS Vented Tweeter with Hybrid Cross-Section Tractrix® Horn LOW FREQUENCY DRIVER Quad 5.25” Cerametallic Cone Woofers ENCLOSURE MATERIAL MDF ENCLOSURE TYPE Bass Reflex via rear-firing Tractrix® Port INPUTS Single Binding Posts HEIGHT 6.81” (17.3 cm) WIDTH 31.13” (79.1 cm) DEPTH 14.46 (36.7 cm) WEIGHT 34 lb (15.4 kg) FINISH Ebony, Walnut, Piano Black ACCESSORIES Rubber Feet (4) BUILT FROM 2018

The Elipson Prestige Facet 14C speaker introduces a host of innovative technologies which allow it to offer a realistic and detailed reproduction of dialogues for your movies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmonioulsy with your interior decor. The Prestige Facet 14C is availble in black, walnut and white. A black or white lacquer is applied to the double-layer front panel. This center-channel speaker is fitted with a pair of 17 cm drivers featuring bullet-shaped phase plugs to limit vibrations and, consequently, reduce distortion. It can reproduce frequencies as low as 43 Hz and has a continuous power rating of 150 W. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is an extremely precise reproduction of dialogues. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. Our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. The Prestige Facet 14C's high sensitivity (93 dB) allows it to be paired with any home cinema receiver. When combined with the rest of the Prestige Facet family, you will obtain a homogeneous ensemble capable of reproducing the soundstage in an optimized manner during your viewing sessions. Specifications : Speaker Center Number of way 2 Power 150 W RMS Tweeter 1 " Mid-bass driver 2 x 6,5 " Frequency Response (±3 dB)43 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)600 x 207 x 250 mm Weight15 kg Dimensions packaging (W x H x D)685 x 310 x 335 mm Weight with packaging, unit16,2 kg

The Elipson Prestige Facet 14C speaker introduces a host of innovative technologies which allow it to offer a realistic and detailed reproduction of dialogues for your movies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmonioulsy with your interior decor. The Prestige Facet 14C is availble in black, walnut and white. A black or white lacquer is applied to the double-layer front panel. This center-channel speaker is fitted with a pair of 17 cm drivers featuring bullet-shaped phase plugs to limit vibrations and, consequently, reduce distortion. It can reproduce frequencies as low as 43 Hz and has a continuous power rating of 150 W. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is an extremely precise reproduction of dialogues. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. Our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. The Prestige Facet 14C's high sensitivity (93 dB) allows it to be paired with any home cinema receiver. When combined with the rest of the Prestige Facet family, you will obtain a homogeneous ensemble capable of reproducing the soundstage in an optimized manner during your viewing sessions. Specifications : Speaker Center Number of way 2 Power 150 W RMS Tweeter 1 " Mid-bass driver 2 x 6,5 " Frequency Response (±3 dB)43 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)600 x 207 x 250 mm Weight15 kg Dimensions packaging (W x H x D)685 x 310 x 335 mm Weight with packaging, unit16,2 kg

The Elipson Prestige Facet 14C speaker introduces a host of innovative technologies which allow it to offer a realistic and detailed reproduction of dialogues for your movies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmonioulsy with your interior decor. The Prestige Facet 14C is availble in black, walnut and white. A black or white lacquer is applied to the double-layer front panel. This center-channel speaker is fitted with a pair of 17 cm drivers featuring bullet-shaped phase plugs to limit vibrations and, consequently, reduce distortion. It can reproduce frequencies as low as 43 Hz and has a continuous power rating of 150 W. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is an extremely precise reproduction of dialogues. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. Our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. The Prestige Facet 14C's high sensitivity (93 dB) allows it to be paired with any home cinema receiver. When combined with the rest of the Prestige Facet family, you will obtain a homogeneous ensemble capable of reproducing the soundstage in an optimized manner during your viewing sessions. Specifications : Speaker Center Number of way 2 Power 150 W RMS Tweeter 1 " Mid-bass driver 2 x 6,5 " Frequency Response (±3 dB)43 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)600 x 207 x 250 mm Weight15 kg Dimensions packaging (W x H x D)685 x 310 x 335 mm Weight with packaging, unit16,2 kg

By combining appealing Danish design, genuine materials and excellence in driver- and speaker development, you get a high performance satellite loudspeaker for on-wall mounting by choosing the FAZON LCR.The satellite speaker can be used both for stereo or multi channel setups - even as a center channel speaker.DALI FAZON LCR comes with a patent pending wall bracket, which makes connectivity and correct polarity very easy, no matter how the speaker is mounted. FAZON LCR is a versatile loudspeaker, which fits a modern lifestyle, where high performance and a compact form factor is in quest.Sound & Build QualityThe drivers in FAZON LCR have a lot of similarities with the drivers used in the multiple award winning DALI IKON and MENTOR speakers.The cabinet is made of die cast aluminum, which makes it possible to create an asymmetrical shape with internal bracings, which will suppress both acoustic and mechanical resonances in the cabinet structure.FAZON LCR 3.1In some rooms it can be difficult to accommodate surround speakers or to run the necessary cables. An obvious solution may be to go for a 3.1 system, for instance three FAZON LCR and the FAZON SUB 1. DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers.WOOD FIBRE CONESLow-loss drivers made of low-mass paper cones with wood fibre reinforcement. The driver technology builts on the MENTOR and IKON series.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.MAGNETIC GRILLESAll products of the FAZON series come with exclusive magnetic grilles enabling an easy click-on function. Specifications : Product seriesFAZONFrequency Range (+/-3 dB) [Hz]78 - 25,000Sensitivity (2,83 V/1 m) [dB]89.0Nominal Impedance [ohms]6Maximum SPL [dB]107Recommended Amplifier Power [W]15 - 120Crossover Frequency [Hz]3,000 HzHigh frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity2 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementCentre / Soundbar On-Wall Dimensions With Base (HxWxD) [mm]  385 x 157 x 117Weight [kg]3.5Accessories IncludedInstallation Templates Manual Mounting Brackets Wall Bracket 

RUBICON VOKAL is the ultimate centre loudspeaker. Striking an elegant balance between size and performance, the RUBICON VOKAL is powerful enough to match the RUBICON 8, and still compact enough to fit in most living rooms.The two 6½” low-loss wood fibre woofers deliver a clear and well defined mid-range together with the hybrid tweeter module. It also uses the same soft dome diaphragm and many of the same SMC technologies as used in the EPICON series.The cabinet size helps the RUBICON VOKAL reproduce even the lowest bass frequencies from the gripping action on the screen or stunning musical performances.And like the rest of the RUBICON range, it features gold-plated bi-wiring terminals.The RUBICON VOKAL fits into every RUBICON surround system and can be combined with e.g. a pair of RUBICON 5, a pair of RUBICON 2 and a SUB or a pair of RUBICON 6, a pair of RUBICON LCR and a DALI SUB. In general, we recommend the SUB M-10 D for a RUBICON surround setup.  WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 34.000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 2,700 / 14,000Crossover Principle : 2 + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 36.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : 5 - 100Dimensions With Base (HxWxD) [mm] : 197 x 581 x 400Weight [kg] : 13.8Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers

RUBICON VOKAL is the ultimate centre loudspeaker. Striking an elegant balance between size and performance, the RUBICON VOKAL is powerful enough to match the RUBICON 8, and still compact enough to fit in most living rooms.The two 6½” low-loss wood fibre woofers deliver a clear and well defined mid-range together with the hybrid tweeter module. It also uses the same soft dome diaphragm and many of the same SMC technologies as used in the EPICON series.The cabinet size helps the RUBICON VOKAL reproduce even the lowest bass frequencies from the gripping action on the screen or stunning musical performances.And like the rest of the RUBICON range, it features gold-plated bi-wiring terminals.The RUBICON VOKAL fits into every RUBICON surround system and can be combined with e.g. a pair of RUBICON 5, a pair of RUBICON 2 and a SUB or a pair of RUBICON 6, a pair of RUBICON LCR and a DALI SUB. In general, we recommend the SUB M-10 D for a RUBICON surround setup.  WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 34.000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 2,700 / 14,000Crossover Principle : 2 + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 36.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : 5 - 100Dimensions With Base (HxWxD) [mm] : 197 x 581 x 400Weight [kg] : 13.8Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers

RUBICON VOKAL is the ultimate centre loudspeaker. Striking an elegant balance between size and performance, the RUBICON VOKAL is powerful enough to match the RUBICON 8, and still compact enough to fit in most living rooms.The two 6½” low-loss wood fibre woofers deliver a clear and well defined mid-range together with the hybrid tweeter module. It also uses the same soft dome diaphragm and many of the same SMC technologies as used in the EPICON series.The cabinet size helps the RUBICON VOKAL reproduce even the lowest bass frequencies from the gripping action on the screen or stunning musical performances.And like the rest of the RUBICON range, it features gold-plated bi-wiring terminals.The RUBICON VOKAL fits into every RUBICON surround system and can be combined with e.g. a pair of RUBICON 5, a pair of RUBICON 2 and a SUB or a pair of RUBICON 6, a pair of RUBICON LCR and a DALI SUB. In general, we recommend the SUB M-10 D for a RUBICON surround setup.  WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 34.000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 2,700 / 14,000Crossover Principle : 2 + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 x 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 36.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : 5 - 100Dimensions With Base (HxWxD) [mm] : 197 x 581 x 400Weight [kg] : 13.8Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers

Turn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. GOLD PLATED TERMINALSEngineered by DALI for ultra low contact resistance, durability and mechanically sturdy construction. High quality gold-plated binding posts. PRODUCT DETAILSTurn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the DALI EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy.We have developed an uncompromising center speaker for all of you multi-channel fans - the DALI EPICON VOKAL. Incorporating 2 x 6½” woofers along with the hybrid tweeter module this speaker promises the same level of transparency and timbre matching with the rest of the series.The EPICON VOKAL will match any of the three main loudspeakers, and it will benefit any setup where the realism and realistic sound pressures are required. Common to all the EPICON loudspeakers is that they work well in both 2.0, 2.1, 5.1 or other multichannel systems.50% of the acoustic energy in a normal movie comes from the center channel. The EPICON VOKAL is up to the real challenge. Meticulous timbre matching and the same ability to render finer details exactly the way they were recorded is an EPICON trademark. Here, e.g. the effortless reproduction of human voices is what sets DALI EPICON VOKAL apart.Note: To mount the EPICON VOKAL securely on the EPICON Stand, the VOKAL should be fastened with the included bolts. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON VOKAL we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON VOKAL.The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter.Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house,DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON VOKAL woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON VOKAL are heated in a process that allows us to press it into an organic shape.This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 6Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 50 - 300Crossover Frequency [Hz] : 2,750 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mm Hybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 46.5Connection Input : Bi-Amping (INT) Recommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : > 5Dimensions With Base (HxWxD) [mm] : 247 x 816 x 349Weight [kg] : 18.4Accessories Included : Connectors Damper Feet Manual Micro Fibre Cloth 

Turn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. GOLD PLATED TERMINALSEngineered by DALI for ultra low contact resistance, durability and mechanically sturdy construction. High quality gold-plated binding posts. PRODUCT DETAILSTurn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the DALI EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy.We have developed an uncompromising center speaker for all of you multi-channel fans - the DALI EPICON VOKAL. Incorporating 2 x 6½” woofers along with the hybrid tweeter module this speaker promises the same level of transparency and timbre matching with the rest of the series.The EPICON VOKAL will match any of the three main loudspeakers, and it will benefit any setup where the realism and realistic sound pressures are required. Common to all the EPICON loudspeakers is that they work well in both 2.0, 2.1, 5.1 or other multichannel systems.50% of the acoustic energy in a normal movie comes from the center channel. The EPICON VOKAL is up to the real challenge. Meticulous timbre matching and the same ability to render finer details exactly the way they were recorded is an EPICON trademark. Here, e.g. the effortless reproduction of human voices is what sets DALI EPICON VOKAL apart.Note: To mount the EPICON VOKAL securely on the EPICON Stand, the VOKAL should be fastened with the included bolts. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON VOKAL we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON VOKAL.The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter.Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house,DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON VOKAL woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON VOKAL are heated in a process that allows us to press it into an organic shape.This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 6Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 50 - 300Crossover Frequency [Hz] : 2,750 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mm Hybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 46.5Connection Input : Bi-Amping (INT) Recommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : > 5Dimensions With Base (HxWxD) [mm] : 247 x 816 x 349Weight [kg] : 18.4Accessories Included : Connectors Damper Feet Manual Micro Fibre Cloth 

Turn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. GOLD PLATED TERMINALSEngineered by DALI for ultra low contact resistance, durability and mechanically sturdy construction. High quality gold-plated binding posts. PRODUCT DETAILSTurn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the DALI EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy.We have developed an uncompromising center speaker for all of you multi-channel fans - the DALI EPICON VOKAL. Incorporating 2 x 6½” woofers along with the hybrid tweeter module this speaker promises the same level of transparency and timbre matching with the rest of the series.The EPICON VOKAL will match any of the three main loudspeakers, and it will benefit any setup where the realism and realistic sound pressures are required. Common to all the EPICON loudspeakers is that they work well in both 2.0, 2.1, 5.1 or other multichannel systems.50% of the acoustic energy in a normal movie comes from the center channel. The EPICON VOKAL is up to the real challenge. Meticulous timbre matching and the same ability to render finer details exactly the way they were recorded is an EPICON trademark. Here, e.g. the effortless reproduction of human voices is what sets DALI EPICON VOKAL apart.Note: To mount the EPICON VOKAL securely on the EPICON Stand, the VOKAL should be fastened with the included bolts. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON VOKAL we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON VOKAL.The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter.Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house,DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON VOKAL woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON VOKAL are heated in a process that allows us to press it into an organic shape.This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 6Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 50 - 300Crossover Frequency [Hz] : 2,750 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mm Hybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 46.5Connection Input : Bi-Amping (INT) Recommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : > 5Dimensions With Base (HxWxD) [mm] : 247 x 816 x 349Weight [kg] : 18.4Accessories Included : Connectors Damper Feet Manual Micro Fibre Cloth 

Turn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. GOLD PLATED TERMINALSEngineered by DALI for ultra low contact resistance, durability and mechanically sturdy construction. High quality gold-plated binding posts. PRODUCT DETAILSTurn your living room into a world-class movie theatre. Experience every word, shout or whisper in ultimate clarity with the movie star of the DALI EPICON family, the VOKAL centre speaker - effortlessly reproducing human voices and delivering audio tracks with stunning realism and accuracy.We have developed an uncompromising center speaker for all of you multi-channel fans - the DALI EPICON VOKAL. Incorporating 2 x 6½” woofers along with the hybrid tweeter module this speaker promises the same level of transparency and timbre matching with the rest of the series.The EPICON VOKAL will match any of the three main loudspeakers, and it will benefit any setup where the realism and realistic sound pressures are required. Common to all the EPICON loudspeakers is that they work well in both 2.0, 2.1, 5.1 or other multichannel systems.50% of the acoustic energy in a normal movie comes from the center channel. The EPICON VOKAL is up to the real challenge. Meticulous timbre matching and the same ability to render finer details exactly the way they were recorded is an EPICON trademark. Here, e.g. the effortless reproduction of human voices is what sets DALI EPICON VOKAL apart.Note: To mount the EPICON VOKAL securely on the EPICON Stand, the VOKAL should be fastened with the included bolts. SMCFor years designing magnet systems has been a DALI specialty. For the EPICON VOKAL we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON VOKAL.The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter.Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house,DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON VOKAL woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON VOKAL are heated in a process that allows us to press it into an organic shape.This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 49 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.5Nominal Impedance [ohms] : 6Maximum SPL [dB] : 111Recommended Amplifier Power [W] : 50 - 300Crossover Frequency [Hz] : 2,750 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mm Hybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 46.5Connection Input : Bi-Amping (INT) Recommended Placement : Centre / Soundbar Shelf or stand Recommended Distance From Wall [cm] : > 5Dimensions With Base (HxWxD) [mm] : 247 x 816 x 349Weight [kg] : 18.4Accessories Included : Connectors Damper Feet Manual Micro Fibre Cloth 

The CC5 is the "trickle-down" of the technology from our flag ship CCR center channel speaker. . The CC5 employs a horizontal, curved quasi-ribbon midrange/tweeter and quasi-ribbon super-tweeter. No dynamic woofers are employed.When used with a flexible bass management system or Magneplanar Woofer, the illusion of a large Magneplanar in the center is possible for the most important speaker in a home theater system.Since the CC5 is a "small" center channel speaker, special precautions must be taken to achieve full-range Maggie center channel performance without sacrificing sound quality. Please see the CC5 manual.Is home theater a high priority to you?Many of our customers indicate that home theater is of less importance than music. We understand because we are the same. However, if you have a dual-purpose music/home theater system, Magnepan has an option that will improve your 2-channel playback as well as home theater. Visit our Tri-Center webpage.Trouble finding a place for a center channel speaker?Wall mounting-- The CC5 has provisions for wall-mounting below a video monitor, using a small omni-mount cantilever. See manual for installation instructions.Dual Center- The photo below is of a demonstration in a hotel during a Consumer Electronic Show. A pair of Magneplanar on-wall models immediately flanking a video monitor provide a dual center channel array which has advantages over a single center channel speaker.A pair of our on-wall speakers achieves a center channel image in the same manner as a stereo system achieves a center image. By angling the speakers approximately 30 degrees to the wall, the center channel speaker on the left of the video monitor is on-axis with the viewer off to the right - and consequently is louder than the center channel speaker on the right of the monitor (which is closer to the viewer).This "pulls" the audio image to the left and keeps the dialog centered on the screen better than point source speakers. Specifications:2-Way, Quasi-Ribbon Midrange/Tweeter and Quasi-Ribbon Super-Tweeter.Freq. Resp.: 200-20kHzSensitivity: 88dB/500Hz/1 meter /2.83vImpedance: 3 OhmsDimensions: 36 x 10.5 x 5.5 inchesTrim: natural oak, black, dark cherryCloth: white, dark gray, black

The SuperCenters are high performance center channel speakers appropriate for the highest quality home theater systems. They are designed to perfectly complement and match our Triton Towers and Aon Bookshelf loudspeakers, both sonically and cosmetically. Their sophisticated industrial design is both attractive and functional, both minimizing their apparent size as well as enhancing their acoustic performance.These center channel models incorporate a D’Appolito Array of two newly developed long-throw 5-1/4˝ bass/midrange drivers (four on the XXL) surrounding one of our signature High Velocity Folded Ribbon (HVFR) tweeters. The 5-1/4˝ drivers incorporate spiderleg cast baskets for rigidity and minimal internal reflection, as well as our unique multi-vaned phase plugs (MVPP), to minimize cross-apex wave propagation interference.They also utilize top-mounted pressure-coupled quadratic planar low frequency radiators that both extend the bass response as well as provide the bass/midrange drivers with ideal acoustic loading and damping. Since the top-mounted passive radiators put out a very low frequency pressure wave, they only require an inch or two of clearance above them so they can be placed in cabinets/wall units if desired (always position the speaker at the front of the opening for best performance).Sonically, the SuperCenters offer the same lifelike, highly detailed, high-resolution, smooth, open, boxless sound quality that our SuperSat centers are famous for, but with additional low frequency extension and greater power handling capacity for greater dynamic range and impact.\The smallest SuperCenter model is amazingly compact. The SuperCenter X incorporates one 7˝ x 10˝ quadratic planar low frequency radiator for surprisingly full-range performance from a modest sized enclosure. The SuperCenter X is just the perfect size and performance for the typical size living room or family room home theater system.  Features:Frequency Response: 45 Hz - 35 kHzEfficiency: 90 dBNominal Impedance Compatible with 8 ohmsDriver Complement Two - 5-1/4˝ Cast-Basket Mid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon High-Frequency RadiatorOne - 7˝ x 10˝ Quadratic Planar Low-Frequency RadiatorRecommended Amplification: 20 - 200 watt/channelDimensions: 20˝ W x 5-3/4˝ H x 11˝ D

The SuperCenters are high performance center channel speakers appropriate for the highest quality home theater systems. They are designed to perfectly complement and match our Triton Towers and Aon Bookshelf loudspeakers, both sonically and cosmetically. Their sophisticated industrial design is both attractive and functional, both minimizing their apparent size as well as enhancing their acoustic performance.These center channel models incorporate a D’Appolito Array of two newly developed long-throw 5-1/4˝ bass/midrange drivers (four on the XXL) surrounding one of our signature High Velocity Folded Ribbon (HVFR) tweeters. The 5-1/4˝ drivers incorporate spiderleg cast baskets for rigidity and minimal internal reflection, as well as our unique multi-vaned phase plugs (MVPP), to minimize cross-apex wave propagation interference.They also utilize top-mounted pressure-coupled quadratic planar low frequency radiators that both extend the bass response as well as provide the bass/midrange drivers with ideal acoustic loading and damping. Since the top-mounted passive radiators put out a very low frequency pressure wave, they only require an inch or two of clearance above them so they can be placed in cabinets/wall units if desired (always position the speaker at the front of the opening for best performance).Sonically, the SuperCenters offer the same lifelike, highly detailed, high-resolution, smooth, open, boxless sound quality that our SuperSat centers are famous for, but with additional low frequency extension and greater power handling capacity for greater dynamic range and impact.\The larger SuperCenter XL benefits from dual 6-3/4˝ x 8˝ quadratic planar low frequency radiators, giving it significant low frequency extension and exceptional dynamic range. The SuperCenter XL is perfect for larger home theater systems. Features:Frequency Response: 36 Hz - 35 kHzEfficiency: 91 dBNominal Impedance Compatible with 8 ohmsDriver Complement Two - 5-1/4˝ Cast-BasketMid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon High-Frequency RadiatorTwo - 6-3/4˝ x 8˝ Quadratic Planar Low-Frequency RadiatorsRecommended Amplification: 20 - 250 watt/channelDimensions: 29˝ W x 5-3/4˝ H x 11˝ D

The SuperCenters are high performance center channel speakers appropriate for the highest quality home theater systems. They are designed to perfectly complement and match our Triton Towers and Aon Bookshelf loudspeakers, both sonically and cosmetically. Their sophisticated industrial design is both attractive and functional, both minimizing their apparent size as well as enhancing their acoustic performance.These center channel models incorporate a D’Appolito Array of two newly developed long-throw 5-1/4˝ bass/midrange drivers (four on the XXL) surrounding one of our signature High Velocity Folded Ribbon (HVFR) tweeters. The 5-1/4˝ drivers incorporate spiderleg cast baskets for rigidity and minimal internal reflection, as well as our unique multi-vaned phase plugs (MVPP), to minimize cross-apex wave propagation interference.They also utilize top-mounted pressure-coupled quadratic planar low frequency radiators that both extend the bass response as well as provide the bass/midrange drivers with ideal acoustic loading and damping. Since the top-mounted passive radiators put out a very low frequency pressure wave, they only require an inch or two of clearance above them so they can be placed in cabinets/wall units if desired (always position the speaker at the front of the opening for best performance).Sonically, the SuperCenters offer the same lifelike, highly detailed, high-resolution, smooth, open, boxless sound quality that our SuperSat centers are famous for, but with additional low frequency extension and greater power handling capacity for greater dynamic range and impact.The mega-high-performance SuperCenter XXL is only 35” wide and includes four 5-1/4" drivers, the GoldenEar High Velocity Folded Ribbon tweeter, three planar passive radiators, and our unique linear-phase crossover, employing fully balanced technology and precision film capacitors. The unique balanced topology reduces stray capacitance in the magnetic circuit, among other things, with the result of dramatically improved clarity. There are three separate internal chambers: a larger one in the center which contains two 5-1/4˝ drivers which run up to meet the tweeter and are coupled to the larger, 7˝ x 10˝ passive radiator in the center, and two smaller ones which each contain a special 5-1/4˝ driver engineered for low frequency response, which runs up to 500 Hz, and is coupled to one of the smaller, 6-3/4˝ x 8˝ passives. Features:Frequency Response: 33 Hz - 35 kHzEfficiency: 91 dBNominal Impedance Compatible with 8 ohmsDriver Complement Four - 5-1/4˝ Cast-Basket Mid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon High-Frequency RadiatorTwo - 6-3/4˝ x 8˝ Quadratic Planar Low-Frequency RadiatorsOne - 7˝ x 10˝ Quadratic Planar Low-Frequency RadiatorRecommended Amplification: 20 - 350 watt/channelDimensions: 35˝ W x 5-3/4˝ H x 11˝ D

The SuperSat 3 and 3C are elegantly curved, compact satellite speakers designed for use when you want very high-performance yet small size, either for main left and right satellite, center channel or surround channel applications. A complete sub/sat system consisting of four SuperSat 3s, a SuperSat 3C and one of GoldenEar ForceField subwoofers has the power to fill an intimate room or a large grand space with glorious sound for your music or cinematic experience.Like SuperSat models, the 3C is the horizontal model optimized specifically for center-channel applications. The SuperSat 3C’s svelte, 2.7" deep, 12" tall cabinet is constructed from a rigid, non-resonant marble-powder infused polymer and is finished in a gorgeous piano-gloss black.Both SuperSat 3 and 3C incorporate two GoldenEar designed MVPP 4-1/2" cast spider leg basket bass/midrange drivers positioned on either side of the one of GoldenEar’s signature HVFR tweeter. The HVFR tweeter propagates sound waves and moves the air by squeezing it with its accordion‐like pleated diaphragm, rather than pushing it as conventional drivers do. The outcome is better impedance matching to the air in the room with greater control, smoother more extended response with lower distortion and dramatically improved dynamic range. The 3C includes an adjustable angling foot for ideal center channel positioning. Both models incorporate a threaded insert as well as a keyhole mount for wall mounting or use with the optional floor stand. Features:On-Wall/On-Shelf Center ChannelTwo 4-1/2" High Definition Bass/Midrange DriversOne High-Velocity Folded Ribbon TweeterPiano Black finish Specification:Frequency Response: 80 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver ComplementTwo - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 200 watt/channel

The SuperSat 50 is a slim, 27” long, 2.5”-deep speaker which is available in both a vertical version (on-wall or on optional Table/Shelf or Floor stand) as well as a horizontal, center-channel-optimized version, the SuperSat 50C. Its powerful and dynamic output capabilities make it the ideal center channel for a Triton based theater system, as well as a perfect choice to go alongside a wall- or shelf-mounted flat screen. Of course, the 2.5” depth makes it a perfect on-wall match for the new generation of super thin flat screens.Its cabinet is constructed from piano-gloss-black-finished aerospace-grade aluminum and contains two GoldenEar 4.5” cast basket bass/midrange drivers with Multi-Vaned Phase Plug (MVPP) configured in a D’Appolito array, surrounding the High-Velocity Folded Ribbon tweeter. Two 4”x 7” quadratic planar low-frequency radiators complete the driver complement. Wall mounting is easily accomplished using the threaded inserts or keyhole mounts on the rear, or table top using the optional smoked-glass Table/Shelf Stand 50, or even floor standing using the optional SuperStand 50 Floor Stand - note total height of speaker and floor stand is 48". The horizontal SuperSat 50C center-channel version includes adjustable leveling feet allowing for multiple angles when shelf/table top mounting.  Specifications:Frequency Response: 60 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver Complement    Four - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversTwo - 4˝ x 7˝ Quadratic Planar Low-Frequency RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 200 watt/channel

The SuperSat 60 and 60C are larger, more powerful versions of our award-winning SuperSat 50 and 50C. They are designed to complement 60" and larger screens when used as left and right channels and mounted vertically next to them, as well as all screen sizes when used as a horizontal center channel or mounted on their optional stands. They provide a larger, more powerful, higher power-handling step-up from our SuperSat 50C when used as a center channel paired with any of our Triton Towers or with any of our other speakers including the SuperSat 50s.The sleek, attractively sculpted cabinet follows the same design philosophy that won the SuperSat 50 the highly respected Resi Award as the industry’s best looking on-wall loudspeaker. It is constructed from aerospace-grade aluminum and finished in gorgeous piano-gloss black. It contains four GoldenEar engineered 4.5" cast spiderleg-basket bass/midrange drivers with Multi-Vaned Phase-Plugs (MVPP) configured in a two-stage D’Appolito Array surrounding our signature High-Velocity Folded Ribbon high-frequency radiator. Two 4" x 7" quadratic planar low frequency radiators complete the driver complement, perfectly loading the bass/midrange drivers for open, boxless midrange and extended low-frequency response.The SuperSat 60 and 60C’s very thin depth makes them perfect for wall mounting next to the latest super thin TVs. This is easily accomplished using the threaded inserts or keyhole mounts on the rear. Dual adjustable feet allow multiple angles when shelf-mounting the horizontal center-channel 60C. In addition, optional floor and tabletop stands are available for vertical mounting. Specifications:Frequency Response: 50 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver Complement    Four - 4-1/2˝ High-Definition Cast-Basket MVPP™ Mid/Bass DriversTwo - 4˝ x 7˝ Quadratic Planar Low-Frequency RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 300 watt/channel

New to Radius, the Radius 200 centre-channel speaker is designed for rack or shelf mounting in a dedicated home theatre system and room. The driver configuration mirrors that of the 225, and so the 200 has the pedigree and fire-power to capture the detailed dynamics and vocal textures of today’s high definition movie soundtracks. Placed front and centre in a serious AV system, the still compact Radius 200 will anchor the entire sound field with life-like fidelity. Features: New to the Radius Range - ultra compact dedicated centre speaker New Dual C-CAM bass drivers with C-CAM tweeter in MTM style configuration - Radius features all new bass drivers with concave cone profiles, introduced by our top-of-the-range Platinum speakers and applied subsequently to Gold GX.  Extensive research and FEA modelling have allowed us to perfect the relationship between the new radiating diaphragm and its motor design, introducing larger motor sizes and voice coils for increased excursion, higher power capability and reduced distortion. New C-CAM gold dome tweeter - optimised to deliver the finest and widest performance within the compact Radius cabinets. It benefits from a more efficient rear-venting design, releasing air trapped and compressed at the back of the tweeter dome, and guiding it around the drive assembly to a rear-loading chamber. HiVe II port design - Straight from Platinum’s design blueprint, the HiVe reflex port makes its Radius debut. It’s shaped to have the same effect on airflow as a gun-barrel on a bullet. Rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently, for a faster more dynamic bass response. Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. New C-CAM gold dome tweeter - optimised to deliver the finest and widest performance within the compact Radius cabinets. It benefits from a more efficient rear-venting design, releasing air trapped and compressed at the back of the tweeter dome, and guiding it around the drive assembly to a rear-loading chamber. HiVe II port design - Straight from Platinum’s design blueprint, the HiVe reflex port makes its Radius debut. It’s shaped to have the same effect on airflow as a gun-barrel on a bullet. Rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently, for a faster more dynamic bass response. Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. Single point ¼”x20TPI wall fixing. Use the optional Monitor Audio speaker mount or any standard wall bracket Optional floor-stand with internal (pre-wired) cable management system. Χαρακτηριστικά: Frequency Response: 60Hz - 35KHz Sensitivity: 86dB Nominal  Impedance: 6 ohms Power Handling Single (RMS): 100 watts System Power Handling (RMS): 150 watts Recommended Amplifier Requirements: 40-150 watts Maximum SPL (dBA): 106 Bass Alignment: Bass reflex - rear ported Driver complement: 2 x 4” (100mm) C-CAM cone bass/mid driver, 1 x 1” (25mm) C-CAM gold dome tweeter Cabinet Dimensions (H x W x D): 125 x 330 x 140mm (415/16 x 13 x 51/2 Inches) Cabinet Dimensions (H x W x D), (Inc Grille & Terminals): 125 x 330 x 164mm, (415/16 x 13 x 67/16 Inches) Weight: 3.6kg (7lb 14oz)

This center speaker is the complementary element for your Home Theater installation and is required, above all to reproduce dialogue.It is positioned under the screen, placed on the TS300 stand or it can even be placed on the floor. Its closed box reproduces voices which sound extremely warm and precise. A lot of work went into studying directivity in order to solve the headache of optimal positioning, which is a common problem with this type of speaker.Voce is Triangle’s response for improving the performance of home theater and multichannel music systems!High-gloss lacquer finish available also in Black, White,or Bubinga(Call/email for availability)Speaker stand (TS 300) is optional.ΤECHNICAL SPECIFICATIONS:Type: center channelNumber of ways: 2 ways closedWiring: bi-wiringDimensions inches (H x W x D): 9.8 x 23.6 x 14.8Weight (lbs): 42Tweeter: TZ2900_MSMidrange: T16GM_F72_MR1 (x2)Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 50-20Permissible Power (W): 100Repetitive Peak Power (W): 200SPL max (db): 109Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 4High Roll-off Frequency (Hz): 2400Hz / 24dB/Oct

This center channel will transport you straight into the world of cinema thanks to its openness and good sound imaging. With its 5" diameter drivers and suspension system, VOCE is compact but capable of reproducing the lowest frequencies.ΤECHNICAL SPECIFICATIONS:Type: center channelNumber of ways: 2 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 7.5 x 21.1 x 12.2Dimensions inches with stand: 18.5 x 21.1 x 12.2Weight (lbs): 22Tweeter: TZ2500Midrange: T13EF84MSR1Sensitivity (dB/2,83 V/m): 92Bandwidth (+-3dB Hz-kHz): 60-20Permissible Power (W): 80Repetitive Peak Power (W): 160Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 5,1High Roll-off Frequency (Hz): 2300Hz / 24dB/Oct

This center channel will transport you straight into the world of cinema thanks to its openness and good sound imaging. With its 5" diameter drivers and suspension system, VOCE is compact but capable of reproducing the lowest frequencies.ΤECHNICAL SPECIFICATIONS:Type: center channelNumber of ways: 2 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 7.5 x 21.1 x 12.2Dimensions inches with stand: 18.5 x 21.1 x 12.2Weight (lbs): 22Tweeter: TZ2500Midrange: T13EF84MSR1Sensitivity (dB/2,83 V/m): 92Bandwidth (+-3dB Hz-kHz): 60-20Permissible Power (W): 80Repetitive Peak Power (W): 160Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 5,1High Roll-off Frequency (Hz): 2300Hz / 24dB/Oct

This center channel features bass drivers which are very similar to those of the 6,5” TRIO, as well as the semi pod-mounted tweeter. It completes the GENÈSE range with its smooth tonal balance.TECHNICAL SPECIFICATIONS:Type: center channelNumber of ways: 2 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 10.3 x 22.8 x 15Weight (lbs): 33.2Tweeter: TZ2500Midrange: T16EF100SMR2 (x2)Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 50-20Permissible Power (W): 90Repetitive Peak Power (W): 180Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 5High Roll-off Frequency (Hz): 2200Hz / 24dB/Oct

This center channel features bass drivers which are very similar to those of the 6,5” TRIO, as well as the semi pod-mounted tweeter. It completes the GENÈSE range with its smooth tonal balance.TECHNICAL SPECIFICATIONS:Type: center channelNumber of ways: 2 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 10.3 x 22.8 x 15Weight (lbs): 33.2Tweeter: TZ2500Midrange: T16EF100SMR2 (x2)Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 50-20Permissible Power (W): 90Repetitive Peak Power (W): 180Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 5High Roll-off Frequency (Hz): 2200Hz / 24dB/Oct

Stemming from the same technologies as the bookshelf speaker and the floorstander, the color center channel is the final piece in this fine audio video system which can adapt to any interior.Its directivity is hardly noticeable due to the closeness of the sources. The balance of the TRIANGLE sound will plunge you into the heart of the action or the concert hall.TECHNICAL SPECIFICATIONS:sensitivity90 dB/2,83 V/ 1mbandwidth80 Hz – 24 KHz (+/- 3 dB)power handling50 Wrepetitive peak power100 Wnumber of channels2nominal impedance6 Ωminimum impedance4,5 Ωfrequency roll-off - treble                        3,0 kHzDimensions175 x 480 x 262 mmweight8,90 kg 

Stemming from the same technologies as the bookshelf speaker and the floorstander, the color center channel is the final piece in this fine audio video system which can adapt to any interior.Its directivity is hardly noticeable due to the closeness of the sources. The balance of the TRIANGLE sound will plunge you into the heart of the action or the concert hall.TECHNICAL SPECIFICATIONS:sensitivity90 dB/2,83 V/ 1mbandwidth80 Hz – 24 KHz (+/- 3 dB)power handling50 Wrepetitive peak power100 Wnumber of channels2nominal impedance6 Ωminimum impedance4,5 Ωfrequency roll-off - treble                           3,0 kHzDimensions175 x 480 x 262 mmweight8,90 kg 

Stemming from the same technologies as the bookshelf speaker and the floorstander, the color center channel is the final piece in this fine audio video system which can adapt to any interior.Its directivity is hardly noticeable due to the closeness of the sources. The balance of the TRIANGLE sound will plunge you into the heart of the action or the concert hall.TECHNICAL SPECIFICATIONS:sensitivity90 dB/2,83 V/ 1mbandwidth80 Hz – 24 KHz (+/- 3 dB)power handling50 Wrepetitive peak power100 Wnumber of channels2nominal impedance6 Ωminimum impedance4,5 Ωfrequency roll-off - treble                   3,0 kHzDimensions175 x 480 x 262 mmweight8,90 kg 

Kanta Center is the perfect way to complete a multichannel system from the line. It provides the exact same level of performance, whether at low or very high volume. It is therefore an excellent addition when combined with Kanta N°1 floor standing loudspeakers or the bookshelf loudspeaker, whatever the front and back configuration. The extreme definition of the higher mid-range register and its tonal balance make this a formidable weapon in any Home Cinema set-up. Film fans will be surprised by the sound clarity and speech intelligibility, which are far superior to the norm. The remarkable neutrality lends itself to thrilling emotion for an unparalleled Home Cinema experience. The Sub 1000F subwoofer is the complementary solution to make an ultra high level Home Cinema configuration. And, when it is then linked with the 300 ICW 4 in-ceiling loudspeakers, even the most exacting film fans will enjoy an incredible 3D audio experience in Dolby Atmos, DTS X or Auro-3D.Optional stand available for optimal integration under the screen.For the very first time, a Flax sandwich cone speaker has been combined with a Beryllium tweeter. Flax is the answer to the low mass/rigidity/damping equation, leading to sound clarity and precision.  This unique Flax/Beryllium combination gives music incredible warmth and musicality. Made in France, this patented flax membrane has already proven itself in Focal home and in-car speakers. The midrange speaker uses TDM Tuned Mass Damping) suspension, and every Kanta speaker is also equipped with an NIC (Neutral Inductance Circuit) driver, which stabilises the magnetic field for perfectly defined sound and better controlled bass. Everything is designed and made to create acoustic softness and warmth: the density and stiffness of the baffle and shell materials, softened angles and double vents. The baffle is made of a new material to suit the acoustic parameters. It is moulded in one piece from high density polymer (HDP). This material has excellent performance: it is 70% denser than MDF, 15% stiffer and provides 25% more damping. The one-piece baffle totally eliminates any sound diffraction. Kanta incorporates Power Flow technology with two vents, on the front and rear faces, to limit bass compression.Focal's research is geared towards reducing distortion in every register. With Kanta, the treble register is reproduced by a new pure Beryllium tweeter. This IAL3 tweeter combines the principles of IAL (Infinite Acoustic Loading) and IHL (Infinite Horn Loading) tweeters, both of which help with the absorption of waves, thus lowering the tweeter frequency. Our engineers have revisited their choice of ‘Focus Time’, which corrects speaker alignment, making them the same distance from the ear.The rear shell is made in one-piece integrally moulded wood. The Zamac base also brings out masses of character. With its spikes and cups, the base provides great stability from a very small footprint. Final details: the glass-covered top and magnetic grille fixings. When these are removed, they reveal the speakers' flax cones, the final design touch that gives Kanta its unique look.A wide range of combinations are available to fit into every interior space.The back cover is available in High Gloss black lacquer and Walnut veneer. For each of these there are four baffle colours, in two finishes.With the High Gloss black shell there are four baffles available: High Gloss Carrara White, Gauloise Blue,Solar Yellow and Black Lacquer.With the wood finish shell there are four baffles available: Matt Finish Ivory, Warm Taupe, Gauloise Blue and Dark Grey.  

Sopra Center allows you to extend the Sopra experience to your Home Cinema. Sopra Center uses all the design aspects of Sopra loudspeakers in order to optimise integration into your home. The center loudspeaker is an essential component of home cinema systems because its role goes beyond reproducing just the dialogue. The mid-range must provide precision and coherence between the visuals and the soundstage. If the centre loudspeaker reproduces the majority of voices in the centre of the image, its spectrum is much broader and also includes music, sound effects and other sounds.The Sopra Center loudspeaker is the ideal complement for the other loudspeakers in the Sopra line: Sopra N°1 bookshelf loudspeakers and Sopra N°2 or Sopra N°3 floorstanding loudspeakers. Each model in the line offers high performance and consistency in terms of output, rendering and scale. Each speaker driver benefits from the same technologies: ‘W’ cones and pure Beryllium inverted dome tweeters. The soundstage therefore, is perfectly dispersed: the sound emanating from either side of the image is reproduced without variation of the timbre.Like all products in the Sopra line, Sopra Center is available in the Black Lacquer finish.The center loudspeaker is composed of:3" (8cm) 'W' cone midrange2 x 61/2" (16.5cm) 'W' cone woofers11/16" (27mm) pure Beryllium IAL tweeter. 

Focal invents Dôme, miniature speakers with exceptional performance. Dôme has been designed and declined in two models with specific technologies to make rediscover true sound, without encroaching upon your living space. This high-end mini speaker succeeds in everything: refined design, sophisticated materials,  « Made in France » high-quality design and 100% Focal technologies from prestigious and renowned loudspeakers. In wall, in ceiling, on furniture or standing, Dôme comes to your place naturally and embodies brilliantly and eloquentlythe true Focal sound.Dôme speaker is available in two models with different Focal cone technologies. Dôme Polyglass, the original satellite loudspeaker of the range, is made of a Polyglass® cone Medium woofer which ensures neutrality, excellent dynamics and a precise sound image. The more recent addition to the family, Dôme Flax, benefits from the innovative composite sandwich cone made with natural flax. It has already proved its worth with the high-fidelity Aria 900 loudspeakers and the Car Audio kits in the Performance range. The Flax technology offers a distinct improvement in definition and better linearity in frequency response. Both versions are made of an aluminium/magnesium inverted dome tweeter, other technology developed by Focal.Dôme design is functional, sophisticated but refined. Dôme is the balance between aesthetic and technology. Its round shape is ideal to avoid internal resonances that distort the purity of timbers. Observe it well, everything is smooth, no visible screw, even the complicated system of joints on pivot is perfectly integrated and beyond suspicion. Imagined as a swivelling « sound spot », Dôme becomes an ideal music source for each and every room from 320ft2 to 430ft2.F cones are made of high-quality flax fibers core enclosed by two thin layers of glass fiber. They satisfy the key criteria of a high performance diaphragm : high internal damping, high velocity of sound and high flexural rigidity.Key points Dôme FlaxHigh-fidelity speaker, patented Flax technologyFocal sound with advanced technologiesIntegrated speaker: in wall, in ceiling, on furniture or standingHigh-gloss lacquered Aluminium bodyMade in France   Specifications:Type 2-way compact sealed speakerDrivers: 4" (10cm) Flax mid-bass, 1" (25mm) Al/Mg inverted dome tweeterFrequency response: (±3dB) 80Hz - 28kHzLow frequency point: (-6dB) 72HzSensitivity: (2.83V/1m) 88dBNominale impedance: 8 OhmsMinimum impedance: 4 OhmsCrossover frequency: 2500HzRecommended amplifier power: 25 - 100WDimensions: (HxWxD) 63/4x511/16x55/8" (172x144x143mm)Net weight: 1,9 kg 

Focal invents Dôme, miniature speakers with exceptional performance. Dôme has been designed and declined in two models with specific technologies to make rediscover true sound, without encroaching upon your living space. This high-end mini speaker succeeds in everything: refined design, sophisticated materials,  « Made in France » high-quality design and 100% Focal technologies from prestigious and renowned loudspeakers. In wall, in ceiling, on furniture or standing, Dôme comes to your place naturally and embodies brilliantly and eloquentlythe true Focal sound.Dôme speaker is available in two models with different Focal cone technologies. Dôme Polyglass, the original satellite loudspeaker of the range, is made of a Polyglass® cone Medium woofer which ensures neutrality, excellent dynamics and a precise sound image. The more recent addition to the family, Dôme Flax, benefits from the innovative composite sandwich cone made with natural flax. It has already proved its worth with the high-fidelity Aria 900 loudspeakers and the Car Audio kits in the Performance range. The Flax technology offers a distinct improvement in definition and better linearity in frequency response. Both versions are made of an aluminium/magnesium inverted dome tweeter, other technology developed by Focal.Dôme design is functional, sophisticated but refined. Dôme is the balance between aesthetic and technology. Its round shape is ideal to avoid internal resonances that distort the purity of timbers. Observe it well, everything is smooth, no visible screw, even the complicated system of joints on pivot is perfectly integrated and beyond suspicion. Imagined as a swivelling « sound spot », Dôme becomes an ideal music source for each and every room from 320ft2 to 430ft2.F cones are made of high-quality flax fibers core enclosed by two thin layers of glass fiber. They satisfy the key criteria of a high performance diaphragm : high internal damping, high velocity of sound and high flexural rigidity.Key points Dôme FlaxHigh-fidelity speaker, patented Flax technologyFocal sound with advanced technologiesIntegrated speaker: in wall, in ceiling, on furniture or standingHigh-gloss lacquered Aluminium bodyMade in France   Specifications:Type 2-way compact sealed speakerDrivers: 4" (10cm) Flax mid-bass, 1" (25mm) Al/Mg inverted dome tweeterFrequency response: (±3dB) 80Hz - 28kHzLow frequency point: (-6dB) 72HzSensitivity: (2.83V/1m) 88dBNominale impedance: 8 OhmsMinimum impedance: 4 OhmsCrossover frequency: 2500HzRecommended amplifier power: 25 - 100WDimensions: (HxWxD) 63/4x511/16x55/8" (172x144x143mm)Net weight: 1,9 kg 

The Aria CC 900 2-way center speaker can be easily combined with the front speakers of the range. The CC 900 was developed with particular attention to timber matching in order to obtain sonic coherence and homogeneity for all kinds of configurations.Recommended for rooms measuring from 215ft2 (20m2 ) and for a listening distance of 10ft (3m).Features:New Flax coneNew TNF tweeterSpeaker drivers developed and manufactured in France by FocalBlack High Gloss and Walnut finishesLeather-finished body