Floorstandind Speakers

Key Features The Concept 40 is Q Acoustics' flagship floor-standing speaker delivers an unparalleled sonic performance. The Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a 'GelcoreTM Construction' cabinet which allows the drive units to perform at their very impressive best. Enclosure Type: 2-Way Reflex with Double Woofer, Bass Unit: 2 x 125mm, Treble Unit: 25mm, Frequency Response (+/- 3 dB): 53Hz - 22kHz, Nominal Impedance: 8ohm, Minimum Impedance: 4ohm, Sensitivity: 90dB, Crossover Frequency: 2.3kHz Conceptualising the Floorstanding Speaker In common with the Concept 20, its award-winning sibling, the Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a GelcoreTM Construction cabinet. This State-of-the-Art, ultra-low resonance and beautifully lacquered cabinet design allows the dual 125mm drive units and wide dispersion 25mm tweeter to perform at their very impressive best. The combination of high sensitivity for dynamics and increased bass extension for realism make the step up from bookshelf speakers, worthwhile. Ultra-Low Resonance Cabinet Design The Concept 40 uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance; a pure and uncoloured sound. Simple to Drive, Simple to Position With 90dB sensitivity and a nominal impedance of 8 ohms, the Concept 40 is easily driven by any good quality amplifier, providing effortless peaks and crescendos in music and movie soundtracks. Various locations for positioning the speaker in the listening room are catered for by providing a foam bung which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or close to a corner. Stunning to Hear, Stunning to See These striking floorstanding loudspeakers are available in multi-layered lacquered black or white finishes. The elegant tripod stand allows the Concept 40 to achieve perfect rigidity and floor contact, which further enhances its performance. Even the speaker's attractive brushed aluminium facia plate is not purely decorative. It's part of an assembly, which clamps a butyl rubber sheet to the front panel to reduce cabinet resonance still further in the panel facing the listener.

Key Features The Concept 40 is Q Acoustics' flagship floor-standing speaker delivers an unparalleled sonic performance. The Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a 'GelcoreTM Construction' cabinet which allows the drive units to perform at their very impressive best. Enclosure Type: 2-Way Reflex with Double Woofer, Bass Unit: 2 x 125mm, Treble Unit: 25mm, Frequency Response (+/- 3 dB): 53Hz - 22kHz, Nominal Impedance: 8ohm, Minimum Impedance: 4ohm, Sensitivity: 90dB, Crossover Frequency: 2.3kHz Conceptualising the Floorstanding Speaker In common with the Concept 20, its award-winning sibling, the Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a GelcoreTM Construction cabinet. This State-of-the-Art, ultra-low resonance and beautifully lacquered cabinet design allows the dual 125mm drive units and wide dispersion 25mm tweeter to perform at their very impressive best. The combination of high sensitivity for dynamics and increased bass extension for realism make the step up from bookshelf speakers, worthwhile. Ultra-Low Resonance Cabinet Design The Concept 40 uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance; a pure and uncoloured sound. Simple to Drive, Simple to Position With 90dB sensitivity and a nominal impedance of 8 ohms, the Concept 40 is easily driven by any good quality amplifier, providing effortless peaks and crescendos in music and movie soundtracks. Various locations for positioning the speaker in the listening room are catered for by providing a foam bung which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or close to a corner. Stunning to Hear, Stunning to See These striking floorstanding loudspeakers are available in multi-layered lacquered black or white finishes. The elegant tripod stand allows the Concept 40 to achieve perfect rigidity and floor contact, which further enhances its performance. Even the speaker's attractive brushed aluminium facia plate is not purely decorative. It's part of an assembly, which clamps a butyl rubber sheet to the front panel to reduce cabinet resonance still further in the panel facing the listener.

With a big bass driver, twin ABRs and Uni-Q driver array the Q950 floorstander can deliver music and cinema in full effect. Pairing KEF's signature Uni-Q midrange and treble driver with a 200mm (8 inches) long-throw bass driver and two matching ABRs brings high resolution sound with extraordinary depth and clarity.

With a big bass driver, twin ABRs and Uni-Q driver array the Q950 floorstander can deliver music and cinema in full effect. Pairing KEF's signature Uni-Q midrange and treble driver with a 200mm (8 inches) long-throw bass driver and two matching ABRs brings high resolution sound with extraordinary depth and clarity.

With a Uni-Q mid and treble backed up by a bass driver and two ABRs the Q750 is built to deliver total musical enjoyment. Pairing the KEF signature Uni-Q driver array with a 165mm (6.5 inch) aluminium bass driver and two matching ABRs, the Q750 delivers astonishing sound quality.

With a Uni-Q mid and treble backed up by a bass driver and two ABRs the Q750 is built to deliver total musical enjoyment. Pairing the KEF signature Uni-Q driver array with a 165mm (6.5 inch) aluminium bass driver and two matching ABRs, the Q750 delivers astonishing sound quality.

The Q550 2.5-way is far more capable than its compact size might suggest, delivering wide bandwidth and full scale with ease. With the KEF signature Uni-Q driver, a 130mm (5.25 inch) aluminium bass driver and two matching ABRs the Q550 delivers phenomenal audiophile performance with clarity and power.

The Q550 2.5-way is far more capable than its compact size might suggest, delivering wide bandwidth and full scale with ease. With the KEF signature Uni-Q driver, a 130mm (5.25 inch) aluminium bass driver and two matching ABRs the Q550 delivers phenomenal audiophile performance with clarity and power.

Focal Kanta No2 Be surprised by Kanta, highly original speakers that will reconnect you with your music. Entirely dedicated to acoustic performance and with a resolutely disruptive aesthetic: that, in a nutshell, is the Kanta DNA! It took three years of research and development to create this model, Kanta No. 2, the first in the range. With their new materials and effectiveness-focused design that give them their powerful identity, they come straight from our engineers' hearts. Focal offers a hitherto unknown amalgamation of technologies: the marriage of Beryllium, in the latest generation IAL3 tweeter, with Flax, for the midrange and bass drivers. The result is precise, detailed sound brimming with warmth and musicality. This is the start of a new era for those who love sound... Naim Uniti Nova Uniti Nova is proof that an all-in-one player can deliver audiophile quality. Whichever source you choose, your music will be transformed into a stunning sonic experience. The reference player in the range, Uniti Nova has been configured to offer the very best solution that we can implement in a single-box, compact enclosure. All the available space has been used to provide 80 watts per channel of Class A/B amplification capable of driving the most demanding loudspeakers – detail and depth you’ll hear in every note, riff and chorus. It offers infinite possibilities, however you want to listen to your music. Uniti Nova really lives up to its name with some outstanding new technology which really sets it apart from the rest of the range. Its circuitry features the highest quality discrete components, a massive toroidal transformer for an exceptional sound, superior isolation, our new signature volume control, more inputs than you can shake a stick at and an 80 watt power per channel power amplifier to boot. Uniti Nova is as good as an all-in-one player can get.

The ultimate loudspeaker Nothing looks, or sounds, quite like Nautilus™. A revolution when it launched and still an icon today. Its ethos informs everything we do. Nautilus comes in three standard colors: midnight blue, black, and silver. We also offer a special service that can match any color from a sample or color reference. Where form truly follows function Shaped by sound At a glance, you can see Nautilus is no ordinary speaker, and after almost a quarter of century it still defines high-end audio. Infinite colors Nautilus comes in three standard colors: silver, black and midnight blue. But, as befits such a unique speaker, we also offer a special service that can match any color you specify. Setting the standard for the future The striking spirals and tubes of Nautilus came from our research into making speaker drive units behave as we wanted: this Nautilus Tube™ technology, for which we won a Queen's Award for Innovation, is now found in almost every speaker we make. Thinking beyond the box Nautilus is quite unlike a conventional box speaker: to package our unique Nautilus tubes for use in the home, our designers developed the striking, and space-efficient, spiral form from which the speaker takes its name. But why the Nautilus tube? We want to hear a speaker driver, not its side-effects – conventional boxes contain sound from the rear of the driver, but bring their own problems. Nautilus tapering tubes soak up wayward energy and reduce resonances to the point of insignificance. Specifications: Technical features Free-mounted diamond dome tweeter Nautilus™ tube tweeter loading Quad magnet tweeter motor Kevlar® brand fibre cone FST™ midrange Sphere/tube midrange enclosure Rohacell® cone bass Dual magnet bass driver motor Matrix™ cabinet

First introduced in 1957, the Heresy, a three-way design, started out as a compact center channel speaker to accompany the Klipschorn in three-speaker stereo arrays. The Heresy IV offers unparalleled sound quality from a relatively small speaker. Features: Includes New 10-Year Warranty All-new K-702 midrange compression driver, featuring a polyimide diaphragm, for exceptional detail For the first time, the Heresy IV features a rear port for the most efficient, fastest air transfer in their class, which reduces port noise for punchier low frequencies K-702 midrange is mated to the K-704 Tractrix® horn for a wide coverage pattern K-107-TI titanium diaphragm high-frequency driver with an all-new wide dispersion phase plug for providing exceptionally even high-frequency dispersion All-new high fidelity network for truer to life sound, best-in-class efficiency, and power handling Klipsch Tractrix ports have custom designed inner flares that help reduce air turbulence entering the port. Less turbulent air helps reduce port noise for cleaner, more powerful bass Available in a high-quality Satin Black Ash, Natural Cherry, Distressed Oak, or American Walnut wood veneer finish Designed & assembled in the USA

First introduced in 1957, the Heresy, a three-way design, started out as a compact center channel speaker to accompany the Klipschorn in three-speaker stereo arrays. The Heresy IV offers unparalleled sound quality from a relatively small speaker. Features: Includes New 10-Year Warranty All-new K-702 midrange compression driver, featuring a polyimide diaphragm, for exceptional detail For the first time, the Heresy IV features a rear port for the most efficient, fastest air transfer in their class, which reduces port noise for punchier low frequencies K-702 midrange is mated to the K-704 Tractrix® horn for a wide coverage pattern K-107-TI titanium diaphragm high-frequency driver with an all-new wide dispersion phase plug for providing exceptionally even high-frequency dispersion All-new high fidelity network for truer to life sound, best-in-class efficiency, and power handling Klipsch Tractrix ports have custom designed inner flares that help reduce air turbulence entering the port. Less turbulent air helps reduce port noise for cleaner, more powerful bass Available in a high-quality Satin Black Ash, Natural Cherry, Distressed Oak, or American Walnut wood veneer finish Designed & assembled in the USA

First introduced in 1957, the Heresy, a three-way design, started out as a compact center channel speaker to accompany the Klipschorn in three-speaker stereo arrays. The Heresy IV offers unparalleled sound quality from a relatively small speaker. Features: Includes New 10-Year Warranty All-new K-702 midrange compression driver, featuring a polyimide diaphragm, for exceptional detail For the first time, the Heresy IV features a rear port for the most efficient, fastest air transfer in their class, which reduces port noise for punchier low frequencies K-702 midrange is mated to the K-704 Tractrix® horn for a wide coverage pattern K-107-TI titanium diaphragm high-frequency driver with an all-new wide dispersion phase plug for providing exceptionally even high-frequency dispersion All-new high fidelity network for truer to life sound, best-in-class efficiency, and power handling Klipsch Tractrix ports have custom designed inner flares that help reduce air turbulence entering the port. Less turbulent air helps reduce port noise for cleaner, more powerful bass Available in a high-quality Satin Black Ash, Natural Cherry, Distressed Oak, or American Walnut wood veneer finish Designed & assembled in the USA

First introduced in 1957, the Heresy, a three-way design, started out as a compact center channel speaker to accompany the Klipschorn in three-speaker stereo arrays. The Heresy IV offers unparalleled sound quality from a relatively small speaker. Features: Includes New 10-Year Warranty All-new K-702 midrange compression driver, featuring a polyimide diaphragm, for exceptional detail For the first time, the Heresy IV features a rear port for the most efficient, fastest air transfer in their class, which reduces port noise for punchier low frequencies K-702 midrange is mated to the K-704 Tractrix® horn for a wide coverage pattern K-107-TI titanium diaphragm high-frequency driver with an all-new wide dispersion phase plug for providing exceptionally even high-frequency dispersion All-new high fidelity network for truer to life sound, best-in-class efficiency, and power handling Klipsch Tractrix ports have custom designed inner flares that help reduce air turbulence entering the port. Less turbulent air helps reduce port noise for cleaner, more powerful bass Available in a high-quality Satin Black Ash, Natural Cherry, Distressed Oak, or American Walnut wood veneer finish Designed & assembled in the USA

Every set (except the LS1a) also comes with a USB interface that facilitate connection of a Windows or Mac PC. It can be used to play audio from the computer directly into the LS1. Mac’s have native support, PC’s require a special driver. Via the same USB connection, the LS1 remote software can be used to setup the system. An LS1i can also be used as generic USB audio interface by people that need a high performance two channel digital audio interface.

The SB1 with ‘DMF’ is a technological marvel. By applying ‘Digital Motional Feedback’, a control technology from the renowned Dutch high-tech industry, it became possible to achieve exceptionally low levels of distortion and full dynamic control. With an SB1 added for the bass frequencies, the LS1 system offers low distortion over the full audio band and redefines the term ‘transparency’. This is bass control like you’ve never experienced before.“Digital Motional Feedback offers bass control like you’ve never experienced before.”At frequencies below 100 Hz loudspeaker drivers need to move a vast amount of air and therefore have high excursion levels, while also the fundamental resonance – which is present in any loudspeaker – induces unwanted delayed effects. The result is that all conventional loudspeakers exhibit a rising distortion in the bass region with additional “thickening” of the bass by the resonance.In electronics, feedback is used to minimise distortion. To apply feedback in electro-mechanical systems like an active loudspeaker, an acceleration sensor needs to be mounted on the cone to monitor its motions. This so called “Motional Feedback” technology has been presented a few times before in history but the precision and control as found in the Grimm Audio SB1 is unique. By adding smart digital processing and current drive, the low distortion of the already high-performance aluminium woofer is further reduced by as much as 30 dB, solving all problems that are related to low frequency resonances and distortion.The SB1 sub is a perfect partner for the LS1v2 and an excellent match for the LS1be. It is even a smart extension for the LS1a. A switch facilitates use of the SB1 with third party systems, so the virtues of Digital Motional Feedback can be enjoyed by many.

The beautifully crafted LS1r remote control is part of the LS1 hifi system. It features volume control, source selection and mute, just with one large dial. Two extra digital audio sources can be connected directly to the remote. When placed at a distance, a regular IR remote may be used for wireless control.

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

The Spectrum X6 Bluetooth is the active floor-standing model in the Spectrum Series of speakers, which with its powerful 200W stereo built-in amplifier and multiple wired and wireless inputs, can play from a multitude of audio sources. This combination of versatility and latest technology creates the ultimate high quality audio system for any audio video installation in the home.   Scandinavian design at its bestThe new Tangent Spectrum speaker series includes both passive and active speakers with a unique Danish design. All models are available in stylish cabinet enclosures in either midnight black or polar white, highly durable matt satin finishes with protective colour matched, integrated mesh grilles.  Contrasting walnut base plinths complete the aesthetic appeal across the range.   Danish audio engineeringWith carefully developed and bespoke twin 130mm bass/mid drivers and 25mm tweeters housed in the handsome bass reflex cabinets, the new Tangent Spectrum X6 Bluetooth allows you to enjoy music and movies with the level of performance reserved only for floor standing speakers of this type.   Automatic On / OffAn ingenious feature of the new Spectrum X6 Bluetooth speaker is the so-called "wake-on" signal on both Bluetooth and AUX inputs.  This feature allows the speaker to turn on or off when the source turns on or off.  It will then also enter standby mode after 20 minutes without a signal.  So if you’re playing your music via Bluetooth, the speaker will turn off when you stop playing music after 20 minutes.  It will then automatically turn on when the same music source starts playing again. Similarly, you can allow the speaker to turn on and off via the AUX input source (mini jack). Note that this function is limited to the last source that the speaker has played.   TV speaker - operate the audio with your TV's remote controlIf your TV has a variable audio output that can be connected via an AUX cable (mini jack), you can use the Tangent Spectrum X6 Bluetooth speakers to improve the sound from your TV for your movie experience. This means you can control the volume of the speakers using your TV remote control.   Remote Control for ease of operationA neat and convenient remote control is supplied with Tangent’s new Spectrum X6 Bluetooth speakers, making them easy to switch between sources, adjust volume and pair the speakers with different Bluetooth compatible devices.     Features: Bluetooth 4.2 aptX "Wake on" AUX & Bluetooth 2 x Digital input 2 x Analogue input Phono input (til turntables) Sub out ​ Specifications: Input: Bluetooth, 3.5 mm AUX (Mini Jack), Analog RCA, Phono input, Optical Digital In, Coaxial in Output: Subwoofer Out, Speaker terminals (stereo) Speaker Units: 2 x 5" midrange and bass / 1" tweeter System: 3-ways Sensitivity: 90 dB Frequency: 50 Hz - 20 000 kHz Remote Control: Yes Power: 2 x 60W Class D Standby:

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

The Legacy range perfectly embodies the brand's HIFI expertise! To design this new range, Elipson has taken advantage of the innovations developed over more than 60 years in-house through emblematic models such as the La Religieuse speaker, the 4050 model and the 1303 model, combined with modern materials of our time. Fast, bright, perfect extension of extreme frequencies, expressiveness of the midrange register, an aerated and realistic sound image are all qualities that characterize Legacy speakers. In the end, they forget themselves and give way to musical pleasure close to reality. Made in France, the range consists of a bookcase speaker, Legacy 3210 for limited spaces and two column speakers including the Legacy 3230, the brand's flagship. Data sheet Type: Floor Standing Sensitivity: 89 dB Impedance: 6 Ohm Finish: Walnut + Noir Satin Silver oak + Noir Satin Dimensions (W x H x D): 1105 × 276 × 360 Weight: 32.8 kg Cabinet thickness: 22-25 mm Charge bass reflex: Event large dispersion base HP Acute: AMT Ribbon HP bas-medium: 2 x 165mm aluminum with ceramic coating Power RMS: 150 W Frequency response: 35Hz-30kHz

The Legacy range perfectly embodies the brand's HIFI expertise! To design this new range, Elipson has taken advantage of the innovations developed over more than 60 years in-house through emblematic models such as the La Religieuse speaker, the 4050 model and the 1303 model, combined with modern materials of our time. Fast, bright, perfect extension of extreme frequencies, expressiveness of the midrange register, an aerated and realistic sound image are all qualities that characterize Legacy speakers. In the end, they forget themselves and give way to musical pleasure close to reality. Made in France, the range consists of a bookcase speaker, Legacy 3210 for limited spaces and two column speakers including the Legacy 3230, the brand's flagship. Data sheet Type: Floor Standing Sensitivity: 89 dB Impedance: 6 Ohm Finish: Walnut + Noir Satin Silver oak + Noir Satin Dimensions (W x H x D): 1105 × 276 × 360 Weight: 32.8 kg Cabinet thickness: 22-25 mm Charge bass reflex: Event large dispersion base HP Acute: AMT Ribbon HP bas-medium: 2 x 165mm aluminum with ceramic coating Power RMS: 150 W Frequency response: 35Hz-30kHz

The Legacy range perfectly embodies the brand's HIFI expertise! To design this new range, Elipson has taken advantage of the innovations developed over more than 60 years in-house through emblematic models such as the La Religieuse speaker, the 4050 model and the 1303 model, combined with modern materials of our time. Fast, bright, perfect extension of extreme frequencies, expressiveness of the midrange register, an aerated and realistic sound image are all qualities that characterize Legacy speakers. In the end, they forget themselves and give way to musical pleasure close to reality. Made in France, the range consists of a bookcase speaker, Legacy 3210 for limited spaces and two column speakers including the Legacy 3230, the brand's flagship. Data sheet Type: Floor Standing Sensitivity: 91 dB Impedance: 4 Ohm Finish: Walnut + Noir Satin Silver oak + Noir Satin Dimensions (W x H x D): 1340 × 347 × 450 mm Weight: 50 kg HP bas-medium: 150mm HP basse: 2 x 210mm Power RMS: 200 W Frequency response: 25Hz-30kHz

The Legacy range perfectly embodies the brand's HIFI expertise! To design this new range, Elipson has taken advantage of the innovations developed over more than 60 years in-house through emblematic models such as the La Religieuse speaker, the 4050 model and the 1303 model, combined with modern materials of our time. Fast, bright, perfect extension of extreme frequencies, expressiveness of the midrange register, an aerated and realistic sound image are all qualities that characterize Legacy speakers. In the end, they forget themselves and give way to musical pleasure close to reality. Made in France, the range consists of a bookcase speaker, Legacy 3210 for limited spaces and two column speakers including the Legacy 3230, the brand's flagship. Data sheet Type: Floor Standing Sensitivity: 91 dB Impedance: 4 Ohm Finish: Walnut + Noir Satin Silver oak + Noir Satin Dimensions (W x H x D): 1340 × 347 × 450 mm Weight: 50 kg HP bas-medium: 150mm HP basse: 2 x 210mm Power RMS: 200 W Frequency response: 25Hz-30kHz

Maestro Utopia Evo has become a three-way floorstanding loudspeaker in order to make it more versatile and easier to install in your listening room. The bass is very consistent but it still retains Maestro’s characteristic dynamic range and punch. The mid-range register hasn’t been neglected: we have integrated our latest technical innovations. In conclusion, each register reproduced by Maestro Utopia Evo has been enhanced for even more precision and dynamic range. Evo stands for evolution... Since 2008, when Utopia III was launched, Focal’s technological heritage has grown enormously. Therefore it was essential to integrate the most recent innovations into this exceptional collection. The sound architecture of Utopia III has been preserved, with the constant intention of reducing harmonic distortion in the fragile mid-range register, which is so very crucial for revealing the artist’s emotions. The two loudspeakers are equipped with Focal’s latest innovations, the NIC (Neutral Inductance Circuit) and the TMD (Tuned Mass Damping) suspension. Maestro Utopia Evo now offers bi amplification, just like Grande Utopia EM and Stella. Discerning music lovers will be able to fine-tune the type of sound, depending on the timbre and the power they’re looking to achieve. The best components from their generation have also found their way into the Utopia III Evo line: cables made in France, denser acoustic materials inside the subwoofer, double terminal boards and separate crossovers. New finishes with distinctive colour-ways offer many options for today’s contemporary spaces. The 2017 edition of Utopia III Evo is an iconic line. They integrate a whole range of innovations and essential detailing, making them completely unique. They are still way ahead of any other line.

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The new Chora 816 model is a 2.5-way bass-reflex floorstanding loudspeaker. Its woofer and midrange/bass speaker driver, both equipped with the Slatefiber cone, work in perfect harmony for a voluptuous sound reproduction and a perfect bass impact. The sound finds its full dimension in your listening room, with a dynamic midrange and remarkable power handling. A front port is placed below the loudspeaker to reduce distortion and, thanks to the tilt of the loudspeaker stand, Time Alignment provides a soundstage focused on the listener. Chora 816 is particularly well suited for Home Cinema listening and blends seamlessly into rooms of up to 323ft² (30m²).The TNF Aluminium/Magnesium tweeter- Soft and precise trebleThe surround linking the dome to its stand uses a memory foam material called Poron. This surround is directly derived from the Utopia’s famous Beryllium tweeter and reduces distortion by a third between 2,000Hz and 3,000Hz, the ear’s high-sensitivity range. The spatialisation and very low directionality of the inverted dome allow silky trebles to be heard from any point in your listening room.The Slatefiber cone - Perfectly balanced soundSlatefiber technology, exclusive to Focal, involves the use of recycled, non-woven carbon fibres applied as a sandwich between two layers of thermoplastic polymer. In their quest for perfection, Focal engineers have opted to use non-woven carbon fibres, all pointing in the same direction to achieve even greater rigidity and better damping. 
Manufactured in the Focal workshops using an ultra-modern industrial tool, the “slate” effect of the cone provides better damping and rigidity, but also lightness – the three “essentials” of a good speaker driver. A sleek, modern designThe Chora range offers a modern design, the slate colour of the Slatefiber cone adding a final refined, authentic touch. 
The stand (optional) is tilted for Time Alignment which provides an optimal soundstage, more focused on the listener.

The Prestige Facet 14F is a 2-and-a-half-way floorstanding speaker. Equally clear and detailed in the highs as it is deep and lively in the lows, this speaker will allow you to rediscover your favorite tracks. The Elipson Prestige Facet 14F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 14F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This floorstanding speaker is equipped with a bass driver and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 14F's high sensitivity allows it to be paired with any amplifier with a power rating of 150 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 2½ Power 150 W RMS Tweeter1 " Mid-bass driver 6,5 " Woofer 6,5 " Frequency Response (±3 dB)38 Hz - 25 kHz Sensitivity 92 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)238 x 1026 x 351 mm Weight20,5 kg Dimensions packaging (W x H x D)315 x 1120 x 400 mm Weight with packaging, unit22,6 kg

A tall, 3-and-a-half-way model, the Prestige Facet 24F has a commanding presence thanks to its elegant design and impressive sonic performance, which combines finesse with power. The Elipson Prestige Facet 24F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 24F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-and-a-half-way floorstanding speaker is equipped with two 20 cm bass drivers and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 24F's high sensitivity allows it to be paired with any amplifier with a power rating of 250 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 3 1/2 Power 250 W RMS Tweeter 1 " Mid-bass driver 6,5 " Woofer 2 x 8 " Frequency Response (±3 dB)28 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)274 x 1137 x 383 mm Weight26,5 kg Dimensions packaging (W x H x D)350 x 1225 x 460 mm Weight with packaging, unit29,9 kg