Subwoofer

T/7x is the perfect answer for the real world. It’s compact enough (and beautiful enough) to end arguments before they begin; while powerful enough to easily answer most needs and balanced enough to blend beautifully with many of the quality speakers out there and still flexible enough to work in specialty applications.Filtered for Purity - The Practically Perfect REL REL’s legendary High Level Input connection and fast filters are a significant chapter in the REL story. Connecting via the speaker outputs of your amplifier without drawing any power from it may seem like magic, but the real magic lies in the way the sound takes on a natural character and blends seamlessly with your speakers. Unique tuning and special limiters means the T/7x sounds fresher, faster and more dynamic than before. 

T/7x is, without reservation, one of the most-balanced RELs of all time. In order to achieve perfect balance, a sub must weigh speed against heft, while ensuring true extension-depth-and do so in a physically harmonious package. T/7x manages to make it all seem easy. Quick and delicate for a perfect blend, it can pound out exceptionally deep, tuneful bass that belies its size and plays louder than most will ever require.Designed to be BetterMany don’t realize the intense connection between performance and design here at REL. Performance is everything to us and it leads to physical design solutions. Thus it is, that our engineers, in recognizing the need for greater cabinet volume to achieve the goals of greater fluidity and power, turn to the designer. He works dimensions to fool the eye into seeing a smaller, more compact footprint, even though cabinet volume increases. Using gently rounded corner radii that allows the eye to flow over and see less visual mass. The result is both modern and clean with no unnecessary adornment.Drive OnThe 8” long throw active and 10” passive drivers are where T/7x derives its incredible speed and clean finish. A thorough revision of critical suspension components are responsible for the agility and suppleness of T/7x. The T/7x sounds louder and more powerful is expected, but few would predict it also is faster, more reactive and transparent than our prior generation, itself a paragon of virtue. Stiffer suspensions better suited to advanced duty mean not only can each driver trace minute details, but also travel farther and handle more power.Tried and True Amplifiers - The Power Behind REL We have retained our signature Class A/B amplifiers used in every generation of Serie T since 2006. Reliability is the key to happy ownership and with some 200,000 and counting of this range leading long happy lives, Serie T/x owners can feel certain of REL’s standard setting reliability. The powerful 200-watt mosfet amplifier used in the T/7x remains an icon of sound and reliability with huge reserves of current. Massive power supplies are used and small upgrades are found everywhere. New driver mosfets that open up performance and transparency and new methods for securing the toroidal transformers mean better performance and superior reliability. The best gets better. Standby Mode switch is only included on 220V units.Zero Compression Wireless - Unlimited Possibilities At REL, we’ve developed a sterling reputation for building the finest sounding, fastest wireless systems available in the industry. REL never rely upon digital compression as it results in thin, lifeless sound. Instead, we have perfected an (optional) Arrow™ Wireless system; so fast and dynamic we’re comfortable encouraging the use of wireless on one channel of a pair of RELs while the other channel may be connected hardwired with cable.

No model in REL’s long history has sold more units nor engendered more affection than our T/5. Here reimagined in a modern, elegant, new form factor, T/5x’s mission remains the same: make remarkable bass far beyond its modest size, do so in a way that complements every interior’s style, and eliminate all visual distraction. Mission Accomplished.Designed for Elegance- Stunningly Simple Perfect for small and medium rooms, T/5x seats perfectly into any décor. Floor-firing is part of its secret; bass energy strikes the floor and spreads uniformly throughout the space making it perform like a larger model. For those picky about style, the hidden bonus is this design eliminates even the grill, rendering it the purest of forms. 

Slightly larger in volume than its predecessor, it actually appears to be smaller due subtle design changes to minimize it’s visual presence. Finally, 5 hand polished coats of lacquer in your choice of High Gloss White or Piano Black add luster to the softly rounded cabinetry. Many don’t realize the intense linkage between performance and design here at REL. Performance is everything to us and so it drives physical design revisions. Our engineers, recognizing the need for greater acoustic volume to achieve the goals of greater fluidity and power, turn to the designer who works dimensions to fool the eye into seeing a smaller, more compact footprint even though cabinet volume increases. Using gently rounded corner radii that allows the eye to flow over and see less visual mass. The result is both modern and familiar with no unnecessary adornment.T/5x borrows a single longthrow 8” (200mm) bass engine from its elder sibling, T/7x. Developed using a composite of aluminum and light paper, this cone captures details that will amaze, while supplying sufficient energy to plumb deeper than one would expect for its size. In T/5x, its throw–the ability to play louder–has been increased. Internally, the suspension received numerous upgrades akin to transforming the handling of a car from a family sedan to a true sports car. More power, greater finesse.T/5x builds on its predecessor’s reliable, expensive 125 W Class A/B amplifiers. Internally, key items significant to upgrading transparency and speed have been upgraded at no cost to REL’s legendary reliability. Separate inputs for High Level Inputs, Low Level Input (necessary for the increasing number of powered active speakers emerging on the market) allow for a natural, perfect transition from speaker to subwoofer. And in theater a separate, dedicated .1/LFE Input for Theatre performance permits automatic transition between music in high end 2-channel applications and home theater without needing to change a single setting. Magic? No, superior engineering. Standby Mode switch is only included on 220V units.

No model in REL’s long history has sold more units nor engendered more affection than our T/5. Here reimagined in a modern, elegant, new form factor, T/5x’s mission remains the same: make remarkable bass far beyond its modest size, do so in a way that complements every interior’s style, and eliminate all visual distraction. Mission Accomplished.Designed for Elegance- Stunningly Simple Perfect for small and medium rooms, T/5x seats perfectly into any décor. Floor-firing is part of its secret; bass energy strikes the floor and spreads uniformly throughout the space making it perform like a larger model. For those picky about style, the hidden bonus is this design eliminates even the grill, rendering it the purest of forms. 

Slightly larger in volume than its predecessor, it actually appears to be smaller due subtle design changes to minimize it’s visual presence. Finally, 5 hand polished coats of lacquer in your choice of High Gloss White or Piano Black add luster to the softly rounded cabinetry. Many don’t realize the intense linkage between performance and design here at REL. Performance is everything to us and so it drives physical design revisions. Our engineers, recognizing the need for greater acoustic volume to achieve the goals of greater fluidity and power, turn to the designer who works dimensions to fool the eye into seeing a smaller, more compact footprint even though cabinet volume increases. Using gently rounded corner radii that allows the eye to flow over and see less visual mass. The result is both modern and familiar with no unnecessary adornment.T/5x borrows a single longthrow 8” (200mm) bass engine from its elder sibling, T/7x. Developed using a composite of aluminum and light paper, this cone captures details that will amaze, while supplying sufficient energy to plumb deeper than one would expect for its size. In T/5x, its throw–the ability to play louder–has been increased. Internally, the suspension received numerous upgrades akin to transforming the handling of a car from a family sedan to a true sports car. More power, greater finesse.T/5x builds on its predecessor’s reliable, expensive 125 W Class A/B amplifiers. Internally, key items significant to upgrading transparency and speed have been upgraded at no cost to REL’s legendary reliability. Separate inputs for High Level Inputs, Low Level Input (necessary for the increasing number of powered active speakers emerging on the market) allow for a natural, perfect transition from speaker to subwoofer. And in theater a separate, dedicated .1/LFE Input for Theatre performance permits automatic transition between music in high end 2-channel applications and home theater without needing to change a single setting. Magic? No, superior engineering. Standby Mode switch is only included on 220V units.

Add more bass to ANY audio system with the Audioengine S8 Powered Subwoofer. Complete with our Isolation Elastomer Feet to reduce vibration and resonance so you'll experience cleaner, tighter bass. Complete Control The Perfect Bass Extension  Excellent performance for music, movies, and games. A perfect bass extension for Audioengine powered speakers or as an upgrade to any music system. Our S8 Subwoofer has an 8″ custom woofer and is small enough to place in a corner or hide behind furniture. The S8 delivers great bass performance and its low, tight, and smooth bass will blend well with the other speakers in your system. Why You'll Love It Benefits Excellent performance for music & movies 8" custom down-firing woofer Dual audio inputs Wireless-ready Set Up In Seconds Simple. No Hassle. Easy To Use. Dual audio inputs are included on the rear panel so connecting S8 to all your gear is easy. An auto-sleep standby feature turns the S8 Subwoofer off when you’re not playing music. Low, Tight, Smooth Bass 8 Inch Custom Woofer The S8 Subwoofer has a super-fast woofer designed for audio and home theater performance. It features an anti-resonant steel frame and heavy-duty rubber speaker surround for accurate low end. The S8’s bottom-firing and front-ported design means you’ll hear quick, precise bass with no distortion, even at higher volume levels. In other words, S8 is a tight, smooth, and natural-sounding subwoofer. Wireless Ready! Cut The Cord If you decide to locate the Audioengine S8 away from your powered speakers or AV receiver, check out the Audioengine W3 Wireless Audio Adapter for high-quality wireless.

Add more bass to ANY audio system with the Audioengine S8 Wireless Subwoofer. Complete with our Isolation Elastomer Feet to reduce vibration and resonance so you'll experience cleaner, tighter bass. Extended-Range Wireless That Works More Bass, No Wires Imagine incredible bass anywhere you want it. We don’t think that wires should hold you back from placing your subwoofer exactly where you need it. Finally, the clean and cable-free setup you always wanted. Simplicity And Versatility After all, simple is best. The Audioengine S8 Wireless Sub works with any stereo receiver or powered speakers. The S8 Wireless Subwoofer includes the best-selling Audioengine W3 Wireless Adapter. Fast Setup Simple. No Hassle. Easy To Use. You should spend your time experiencing incredible bass, not setting up your subwoofer. Simply connect the wireless transmitter to an output on your stereo receiver or powered speakers. The wireless receiver plugs directly into the S8 subwoofer and just like that, you’re done! The Perfect Bass Extension 8 Inch Custom Woofer Excellent low-end performance for music, movies, and games. A perfect bass extension for Audioengine powered speakers or as an upgrade to any music system. The S8 Sub has an 8″ custom woofer and is small enough to place in a corner or hide behind furniture. The S8 delivers great bass performance and its low, tight, and smooth bass will blend well with the other speakers in your system. Low, Tight, Smooth Bass Experience Incredible Bass Many people struggle with finding the best, super-fast woofer designed for audio and home theater performance. That’s why the S8 features an anti-resonant steel frame and heavy-duty rubber speaker surround for accurate low end. The S8 Subwoofer’s bottom-firing and front-ported design means you’ll hear quick, precise bass with no distortion, even at higher volume levels for a tight, smooth, and natural-sounding wireless sub.

Add more bass to ANY audio system with the Audioengine S8 Wireless Subwoofer. Complete with our Isolation Elastomer Feet to reduce vibration and resonance so you'll experience cleaner, tighter bass. Extended-Range Wireless That Works More Bass, No Wires Imagine incredible bass anywhere you want it. We don’t think that wires should hold you back from placing your subwoofer exactly where you need it. Finally, the clean and cable-free setup you always wanted. Simplicity And Versatility After all, simple is best. The Audioengine S8 Wireless Sub works with any stereo receiver or powered speakers. The S8 Wireless Subwoofer includes the best-selling Audioengine W3 Wireless Adapter. Fast Setup Simple. No Hassle. Easy To Use. You should spend your time experiencing incredible bass, not setting up your subwoofer. Simply connect the wireless transmitter to an output on your stereo receiver or powered speakers. The wireless receiver plugs directly into the S8 subwoofer and just like that, you’re done! The Perfect Bass Extension 8 Inch Custom Woofer Excellent low-end performance for music, movies, and games. A perfect bass extension for Audioengine powered speakers or as an upgrade to any music system. The S8 Sub has an 8″ custom woofer and is small enough to place in a corner or hide behind furniture. The S8 delivers great bass performance and its low, tight, and smooth bass will blend well with the other speakers in your system. Low, Tight, Smooth Bass Experience Incredible Bass Many people struggle with finding the best, super-fast woofer designed for audio and home theater performance. That’s why the S8 features an anti-resonant steel frame and heavy-duty rubber speaker surround for accurate low end. The S8 Subwoofer’s bottom-firing and front-ported design means you’ll hear quick, precise bass with no distortion, even at higher volume levels for a tight, smooth, and natural-sounding wireless sub.

Add more bass to ANY audio system with the Audioengine S8 Powered Subwoofer. Complete with our Isolation Elastomer Feet to reduce vibration and resonance so you'll experience cleaner, tighter bass. Complete Control The Perfect Bass Extension  Excellent performance for music, movies, and games. A perfect bass extension for Audioengine powered speakers or as an upgrade to any music system. Our S8 Subwoofer has an 8″ custom woofer and is small enough to place in a corner or hide behind furniture. The S8 delivers great bass performance and its low, tight, and smooth bass will blend well with the other speakers in your system. Why You'll Love It Benefits Excellent performance for music & movies 8" custom down-firing woofer Dual audio inputs Wireless-ready Set Up In Seconds Simple. No Hassle. Easy To Use. Dual audio inputs are included on the rear panel so connecting S8 to all your gear is easy. An auto-sleep standby feature turns the S8 Subwoofer off when you’re not playing music. Low, Tight, Smooth Bass 8 Inch Custom Woofer The S8 Subwoofer has a super-fast woofer designed for audio and home theater performance. It features an anti-resonant steel frame and heavy-duty rubber speaker surround for accurate low end. The S8’s bottom-firing and front-ported design means you’ll hear quick, precise bass with no distortion, even at higher volume levels. In other words, S8 is a tight, smooth, and natural-sounding subwoofer. Wireless Ready! Cut The Cord If you decide to locate the Audioengine S8 away from your powered speakers or AV receiver, check out the Audioengine W3 Wireless Audio Adapter for high-quality wireless.

The ATC SCM0.1/12 is a floor loaded active subwoofer using ATC’s 12-inch SL driver powered an impressive 650W amplifier. It is ideally paired with the SCM20ASL Pro. The ATC SCM0.1/12 offers extremely low 3rd harmonic distortion and an impressive 118dB spl at 28Hz. Its floor-loaded design provides a better room adaptation than front-loaded designs.It is designed to be used as the ELF in a multi-channel setup or as bass extender in a two-channel setup.ATC SCM0.1/12 Main Features: Drivers: LF 314mm Amplitude Linearity: +2dB 30Hz - 300Hz Cut-off Frequencies (-6dB free standing) 20Hz Max Continuous SPL @ 1 meter 118dB Amplifier Output: Bass 1000 Watts RMS Overload Protection Active FET Momentary Gain Reduction plus thermal tweeter protection Input Impedance 10k ohms Input Sensitivity 1V Sensitivity Trim +6dB Input Connector Male XLR

Whether you’re installing a new set of surround or ATMOS speakers, adding a second subwoofer for the ultimate home theater experience, or just need more core-pounding impact from your favorite music, the HTS 10 delivers the powerful bass you crave. All The Feels The Polk HTS 10 subwoofer enhances home theater and music listening with powerful deep bass. It features a long-throw Dynamic Balance 10” driver, patented Power Port technology and a state-of-the-art 200W Class D amplifier. Easily to access controls for volume, low pass filter, and phase correction. Connect via LFE (unfiltered / low pass disabled) or stereo line level RCA inputs. Bass You Can Feel Pair the HTS 10 with any of your Polk speakers for that deep bass impact you can feel across all your home theater and music needs. Dynamic Balance Drivers Front-firing 10” driver with our patented Dynamic Balance technology is Klippel optimized to provide clean, clear bass, better linearity, lower distortion and greater durability.

Whether you’re installing a new set of surround or ATMOS speakers, adding a second subwoofer for the ultimate home theater experience, or just need more core-pounding impact from your favorite music, the HTS 10 delivers the powerful bass you crave. All The Feels The Polk HTS 10 subwoofer enhances home theater and music listening with powerful deep bass. It features a long-throw Dynamic Balance 10” driver, patented Power Port technology and a state-of-the-art 200W Class D amplifier. Easily to access controls for volume, low pass filter, and phase correction. Connect via LFE (unfiltered / low pass disabled) or stereo line level RCA inputs. Bass You Can Feel Pair the HTS 10 with any of your Polk speakers for that deep bass impact you can feel across all your home theater and music needs. Dynamic Balance Drivers Front-firing 10” driver with our patented Dynamic Balance technology is Klippel optimized to provide clean, clear bass, better linearity, lower distortion and greater durability.

The Polk HTS 12 subwoofer enhances home theater and music listening with powerful deep bass. Deep Bass For Home Theater And Music Whether you’re installing a new set of surround or ATMOS speakers, adding a second subwoofer for the ultimate home theater experience, or just need more core-pounding impact from your favorite music, the HTS 12 delivers the powerful bass you crave with its long-throw 12” driver, patented Power Port® technology and 400W Class D amplifier Patented Power Port® Technology The Power Port® floor-firing design smoothly transitions air flow from the speaker into your listening area for deep, extended bass impact while minimizing turbulence, distortion, and port noise. Bass You Can Feel Pair the HTS 12 with any of your Polk speakers for that deep bass impact you can feel across all your home theater and music needs. Dynamic Balance Drivers Front-firing 12” driver with our patented Dynamic Balance technology is Klippel optimized to provide clean, clear bass, better linearity, lower distortion and greater durability.

The Polk HTS 12 subwoofer enhances home theater and music listening with powerful deep bass. Deep Bass For Home Theater And Music Whether you’re installing a new set of surround or ATMOS speakers, adding a second subwoofer for the ultimate home theater experience, or just need more core-pounding impact from your favorite music, the HTS 12 delivers the powerful bass you crave with its long-throw 12” driver, patented Power Port® technology and 400W Class D amplifier Patented Power Port® Technology The Power Port® floor-firing design smoothly transitions air flow from the speaker into your listening area for deep, extended bass impact while minimizing turbulence, distortion, and port noise. Bass You Can Feel Pair the HTS 12 with any of your Polk speakers for that deep bass impact you can feel across all your home theater and music needs. Dynamic Balance Drivers Front-firing 12” driver with our patented Dynamic Balance technology is Klippel optimized to provide clean, clear bass, better linearity, lower distortion and greater durability.

NEO S8 A is the perfect complement for NEO series loudspeakers. This self-powered subwoofer with balanced inputs can be perfectly installed in almost any installations thanks to its elegant ultrafine design. It can be hung to walls vertically or horizontally and it is possible to hide it with a simple painting. It features balanced signal inputs (by block of terminals) and high level input coming from an amplifier. It is possible to control gain and cut frequency with a value between 50 and 150 Hz.

NEO S8 A is the perfect complement for NEO series loudspeakers. This self-powered subwoofer with balanced inputs can be perfectly installed in almost any installations thanks to its elegant ultrafine design. It can be hung to walls vertically or horizontally and it is possible to hide it with a simple painting. It features balanced signal inputs (by block of terminals) and high level input coming from an amplifier. It is possible to control gain and cut frequency with a value between 50 and 150 Hz.

Serie T/x is instantly seen as crisper, fresher, a full upgrade . Our goals were not simply to improve upon its illustrious predecessor, but to deliver as much as possible of our latest Serie S on a budget. Faster, more transparent sounding system performance awaits you with higher output levels and even greater impact. Serie T/9x: Bigger AND Better THE SERIES FLAGSHIP The job of any range topper for REL is to deliver more of everything, particularly output and dynamics. The 9x is no different in this regard, as it delivers the goods in both music and theatre applications. 9x, however, delivers a level of intimacy, clarity and speed that means there are no longer trade-offs between the sonic balance of smaller models weighed against the power and scale of a model 9. The all new 9x has even greater output than before, but the headline news is the way it sacrifices nothing in clarity and transparency to achieve this. At this price it opens the pathway for owners of high performance European floor and stand mounted monitors and smaller panel speakers to enjoy truly full range sound. Reimagined, Then Reengineered A COMPLETELY REDESIGNED FLAGSHIP Many don’t realize the intense linkage between performance and design here at REL. Performance is everything to us and so it drives physical design revisions. Our engineers, recognizing the need for greater acoustic volume to achieve the goals of greater fluidity and power, turn to the designer who works dimensions to fool the eye into seeing a smaller, more compact footprint even though cabinet volume increases. Using gently rounded corner radii that allows the eye to flow over and see less visual mass. The result is both modern and familiar with no unnecessary adornment. Outsized Performance INNOVATIVE ALLOY/FIBRE BASS ENGINES To achieve higher output with better control requires a complete overhaul of the suspension components. Much like the suspension on a sports car, these items are responsible for the tuning and feel of our designs. By increasing the cabinet volume, efficiency is improved yielding higher output for no more amplifier power. Less back pressure inside the cabinet means we can tune for a stiffer, better controlled driver suspension. We retained the best aspects of our previous design, such as the aluminum center cap responsible for stiffening the lightweight 10” (250mm) cone while adding almost no mass. The updated combination produces considerably better attack and dynamics with greater transparency. Tried and True Amplifiers THE BRAINS BEHIND THE BRAWN We have retained our signature Class A/B amplifiers used in every generation of Serie T since 2006. Reliability is the key to happy ownership and with some 200,000 and counting of this range leading long happy lives, Serie T/x owners can feel certain of REL’s standard setting reliability. The powerful 300 watt mosfet amplifier used in the T/9x remains an icon with huge reserves of current, massive power supplies but small upgrades are found everywhere. New driver mosfets that open up performance and transparency and new methods for securing the toroidal transformers mean better performance and superior strength. REL’s legendary High Level Input connection and fast filters are a significant part of the REL story. Connecting via the speaker outputs of your amplifier without drawing any power from it may seem like magic, but the real magic lies in the way the sound takes on a natural character. Unique tuning and special limiters means the T/x range sounds fresher, faster and more dynamic than before. Standby Mode switch is only included on 220V units.

Serie T/x is instantly seen as crisper, fresher, a full upgrade . Our goals were not simply to improve upon its illustrious predecessor, but to deliver as much as possible of our latest Serie S on a budget. Faster, more transparent sounding system performance awaits you with higher output levels and even greater impact. Serie T/9x: Bigger AND Better THE SERIES FLAGSHIP The job of any range topper for REL is to deliver more of everything, particularly output and dynamics. The 9x is no different in this regard, as it delivers the goods in both music and theatre applications. 9x, however, delivers a level of intimacy, clarity and speed that means there are no longer trade-offs between the sonic balance of smaller models weighed against the power and scale of a model 9. The all new 9x has even greater output than before, but the headline news is the way it sacrifices nothing in clarity and transparency to achieve this. At this price it opens the pathway for owners of high performance European floor and stand mounted monitors and smaller panel speakers to enjoy truly full range sound. Reimagined, Then Reengineered A COMPLETELY REDESIGNED FLAGSHIP Many don’t realize the intense linkage between performance and design here at REL. Performance is everything to us and so it drives physical design revisions. Our engineers, recognizing the need for greater acoustic volume to achieve the goals of greater fluidity and power, turn to the designer who works dimensions to fool the eye into seeing a smaller, more compact footprint even though cabinet volume increases. Using gently rounded corner radii that allows the eye to flow over and see less visual mass. The result is both modern and familiar with no unnecessary adornment. Outsized Performance INNOVATIVE ALLOY/FIBRE BASS ENGINES To achieve higher output with better control requires a complete overhaul of the suspension components. Much like the suspension on a sports car, these items are responsible for the tuning and feel of our designs. By increasing the cabinet volume, efficiency is improved yielding higher output for no more amplifier power. Less back pressure inside the cabinet means we can tune for a stiffer, better controlled driver suspension. We retained the best aspects of our previous design, such as the aluminum center cap responsible for stiffening the lightweight 10” (250mm) cone while adding almost no mass. The updated combination produces considerably better attack and dynamics with greater transparency. Tried and True Amplifiers THE BRAINS BEHIND THE BRAWN We have retained our signature Class A/B amplifiers used in every generation of Serie T since 2006. Reliability is the key to happy ownership and with some 200,000 and counting of this range leading long happy lives, Serie T/x owners can feel certain of REL’s standard setting reliability. The powerful 300 watt mosfet amplifier used in the T/9x remains an icon with huge reserves of current, massive power supplies but small upgrades are found everywhere. New driver mosfets that open up performance and transparency and new methods for securing the toroidal transformers mean better performance and superior strength. REL’s legendary High Level Input connection and fast filters are a significant part of the REL story. Connecting via the speaker outputs of your amplifier without drawing any power from it may seem like magic, but the real magic lies in the way the sound takes on a natural character. Unique tuning and special limiters means the T/x range sounds fresher, faster and more dynamic than before. Standby Mode switch is only included on 220V units.

Tzero MKIII is every bit a true REL, just smaller.  It enriches even modest systems with power and natural bass by bringing the quality and full REL connectivity suite along with an all-new aluminum cone that provides much greater stiffness to the driver for punch and a powerful, reliable Class D amplifier, all at an attractive price point and size. Ideal for apartments, flats, studies, anywhere space is limited. Miracle In Miniature 100% REL, JUST SMALLER Tzero is, in many ways, the most difficult design we have ever executed because never before have we delivered so much for so little. Five coats of your choice of black or white high gloss lacquer as in all Serie T, NextGen Class D amplifiers, our famous High Level Input, plus a separate .1/LFE input stage with its own volume control to get theatre levels AND music perfect without racing to adjust or looking for a remote control. The jewel of the MKIII is the new aluminum-coned driver, a rugged 6.5” unit with exceptional output and low bass extension for its size. While it won’t drive medium or large rooms hard, we make plenty of larger models that handle that task, Tzero MKIII remains a miracle in miniature. Scaled for the Simple Life COMPACT POWER & FINESSE At REL every design begins by defining and designing the best bass engine for a given application. With its new aluminum-coned long throw 6.5” driver, the MKIII is powerful and articulate, delivering surprisingly deep bass. Able to fill smaller spaces effortlessly. Have a much larger space? Turn to one of our larger models, there are plenty to choose from. Outsized Performance BASS BEYOND ITS SIZE At REL every clean sheet design begins by defining and designing the best bass engine for a given application. While the long throw 6.5” is our smallest-to-date, but make no mistake it is powerful and articulate, able to fill medium-sized rooms effortlessly. Have a much larger space? Distribute them throughout for an unobtrusive spacious presentation of music and film sound. Brains & Brawn RIGHT SIZED POWER & CONTROL Though Tzero MKIII is REL’s entry level, that doesn’t mean it can’t punch far above its weight class. 100 high-current watts from a NextGen Class D amp means it holds its head high and is capable of delivering many years of satisfying performance. We feature the same high-quality input filters, crossovers and limiters as our larger models.  Tzero MKII includes a full REL connectivity suite, fast 8ms delay filter set and our famed High Level Input as well as a separate .1/LFE input with its own level control and a standby circuit that reliably comes alive at very low levels.

Tzero MKIII is every bit a true REL, just smaller.  It enriches even modest systems with power and natural bass by bringing the quality and full REL connectivity suite along with an all-new aluminum cone that provides much greater stiffness to the driver for punch and a powerful, reliable Class D amplifier, all at an attractive price point and size. Ideal for apartments, flats, studies, anywhere space is limited. Miracle In Miniature 100% REL, JUST SMALLER Tzero is, in many ways, the most difficult design we have ever executed because never before have we delivered so much for so little. Five coats of your choice of black or white high gloss lacquer as in all Serie T, NextGen Class D amplifiers, our famous High Level Input, plus a separate .1/LFE input stage with its own volume control to get theatre levels AND music perfect without racing to adjust or looking for a remote control. The jewel of the MKIII is the new aluminum-coned driver, a rugged 6.5” unit with exceptional output and low bass extension for its size. While it won’t drive medium or large rooms hard, we make plenty of larger models that handle that task, Tzero MKIII remains a miracle in miniature. Scaled for the Simple Life COMPACT POWER & FINESSE At REL every design begins by defining and designing the best bass engine for a given application. With its new aluminum-coned long throw 6.5” driver, the MKIII is powerful and articulate, delivering surprisingly deep bass. Able to fill smaller spaces effortlessly. Have a much larger space? Turn to one of our larger models, there are plenty to choose from. Outsized Performance BASS BEYOND ITS SIZE At REL every clean sheet design begins by defining and designing the best bass engine for a given application. While the long throw 6.5” is our smallest-to-date, but make no mistake it is powerful and articulate, able to fill medium-sized rooms effortlessly. Have a much larger space? Distribute them throughout for an unobtrusive spacious presentation of music and film sound. Brains & Brawn RIGHT SIZED POWER & CONTROL Though Tzero MKIII is REL’s entry level, that doesn’t mean it can’t punch far above its weight class. 100 high-current watts from a NextGen Class D amp means it holds its head high and is capable of delivering many years of satisfying performance. We feature the same high-quality input filters, crossovers and limiters as our larger models.  Tzero MKII includes a full REL connectivity suite, fast 8ms delay filter set and our famed High Level Input as well as a separate .1/LFE input with its own level control and a standby circuit that reliably comes alive at very low levels.

The Planet Sub has the same DNA as Elipson’s Planet line: its exceptional design and uncompromising sound fidelity bear witness to its prestigious lineage. Integrating a 20 cm speaker alive with 200 watt amplification, this bass unit offers musical excellence and a sense of versatility so it’s at home as part of your stereo setup and it’s just as comfortable anchoring your home-cinema configuration. Uniting elegance and performance, Planet Sub guarantees to fit in harmoniously with your Elipson spheres.Specifications:With grill and terminal (W x H x D): 316 x 393 x 316 mm System: 1 wayFrequency range: 30 - 240 HzMax music power: 200 WattsVoltage: 110-220V / 220-240VAC - 200W WattsAmplifier type: DIntegrated Amplifier power: 200Terminal type: Single wiringTerminal finish: Silver platedInput: LineEnclosure: Bass ReflexPhase: 0/180

The SW series of subwoofers offer a level of performance previously unheard of in their class. Revolutionary drive units, amplifier modules and filter stages feature on every model. They strike the perfect balance between power and sound quality, offering remarkable sound pressure levels, yet retaining enough control to be considered audiophile in quality. The new range of SW subwoofers comes with a host of new features. They now come with Non-pressed paper cones for increase self-damping, improved transient impact and intern increased the structural rigidity of the cone itself. The centre vents are copper lined to reduce the magnetic distortion and improve the heat dissipation. Still utilising the solid, well-engineered power amplifiers the SW subwoofers are optimised for high impact at low frequencies and are ideal for movies or music. With the various finishes to the cabinets – Rosewood /Walnut Pearl/White sandex/Blackwood Vinyl with Hi-gloss baffle – these subwoofers look great with matching floorstanding speakers.

This Eltax SW8OO housing can complement a wide range of existing systems, including compact speaker packs or small satellites. Equipped with a 20 cm diameter speaker and a 60W amplifier, this subwoofer is perfect for experiencing the bass effects recorded on LFE tracks on DVD or Blu-ray discs. Its elegant black ash finish makes it relatively discreet and will allow it to be integrated into any interior.

This box from the Experience range is the ideal complement to the Experience 5.0 package. However, the Eltax Experience SW8 can complement a wide range of existing systems, including compact speaker packages or small satellites. Equipped with a 20 cm diameter speaker and an 80W amplifier, this cabinet is perfect for discovering the bass effects recorded on LFE tracks of DVD or Blu-ray discs. Its elegant black ash finish makes it relatively discreet and will allow it to be integrated into any interior.

Made in France in the Focal workshops, the 1000 IWSUB Utopia boasts brand new, exclusive architecture and can be installed horizontally or vertically. It incorporates the best Focal technology from the iconic Utopia line. Its three 6 1/2” (16.5cm) subwoofers with their ‘W’ cones offer unrivalled power handling: the bass reproduction is sensational, in Stereo as well as Home Cinema listening sessions. Constantly pushing boundaries, the engineers have designed and conceived this subwoofer so that it assembles perfectly with the 1000 IWLRC Utopia reference loudspeaker, but also with as many other 1000 IWSUB Utopia models as desired. Each product is connected to the others using the professional Speakon cabling provided: the only limit to the assembly options is your imagination! Offering the ability to choose the impedance for each speaker driver according to the number of linked products, 1000 IWSUB Utopia allows an unrivalled audio installation without modifying your room, thanks to its ready-to-paint magnetic grille. The discreet pleasure of powerful sound excellence...

DALI SUB C-8 D Unlike some subwoofers the DALI SUB C-8 D has been engineered to perform equally well on both music and movies. It is very important to us that a subwoofer can render a performance true to the input signal. Though featuring a 8” down-firing woofer, the SUB C-8 D is everything but a ‘boombox’. PRODUCT DETAILS Unlike some subwoofers the DALI SUB C-8 D has been engineered to perform equally well with both music and movies. It is very important to us that a subwoofer can render a performance true to the input signal. Therefore a DALI subwoofer is everything but a ‘boombox’. Placing a subwoofer is a very large part of creating the perfect audio reproduction. We recommend placing the SUB C-8 D in a corner or if that is not possible alongside a wall. This will maximise the bass output and the distribution around the room. The compact size of the SUB C-8 D makes placing it correctly much easier than many larger subwoofers. DALI recommend using the SUB C-8 D with the ZENSOR and SPEKTOR series. Over the years our engineers have developed a set of sound design principles. Today these are applied in the creation of any DALI speaker. Naturally our subwoofers must be able to enter into any setup without sacrificing the purpose of providing wide dispersion, time coherence and low-loss performance. Therefore the DALI SUB C-8 D will feel equally at home in a movie focused surround setup as well as a compact stereo setup meant for mainly musical enjoyment. AMPLIFIER The integrated 170 Watt RMS Class D amplifier is a highly linear construction. The DALI SUB C-8 D will follow and render the required signal with an absolute minimum of bias. Designed not only for continuous power, but also for peak performances, the SUB C-8 D is able to deliver 220 Watt Peak Power. This is very relevant when it comes to both movie and music signals. To improve sound reproduction and to ensure performance under difficult circumstances, a limiter has been incorporated in the amplifier section. The integrated limiter works in two areas: It compares the input signal amplitude to the potential output signal level, and it compares the available supply voltage from the power supply to the expected output signal. If any of these comparisons show potential problem, the limiter will cut the signal in a soft manner and without affecting peak power. Fitted with controls for gain, cut-off frequency, and phase, the DALI SUB C-8 D will adapt to any front speaker and room acoustics. And with a choice of LFE and LINE inputs it can be connected to almost any amplifier, receiver or processor. The switch mode power supply is part of the reason for very low power consumption - only 0.4 Watt in standby mode. And the amplifier displays an impressive efficiency of 70%. In unison the high-efficiency amplifier section and power supply construction generate an absolute minimum of heat loss. For that reason you will find no external heat sink on the SUB C-8 D. WOOFER DALI SUB C-8 D is equipped with an 8” down-firing woofer. The cone is constructed from high-quality paper pulp resulting in a rigid cone with excellent breakup characteristics while at the same time being very lightweight and agile. The woofer engine is built around an ‘over-sized’ ferrite magnet and optimised for maximum flux within the voice coil gap. It was crucial for our project team to enable the SUB C-8 D to render the finer low frequency details in music - also at high sound pressure levels. The measured values indicate that we reached a level of control and precision that is rarely to be found in this category at all. And the numerous listening sessions has truly convinced us that this was the right way to go. The voice coil is 26.5 mm long and built for long excursions. It is vented to ensure air-cooling to the system and the benefit is a stable impedance response. The pole piece is likewise vented for maximum cooling, and here the venting also reduces internal compression in the motor system. This ensures free movement of the cone without any over/under pressure affecting the performance. Adhering to the low-loss sound design principle, the surround of the woofer is built to allow long and linear excursion. The over-sized suspension is designed to allow both weak and strong transients to turn into undistorted acoustic signals. CABINET The solid MDF cabinet is designed and manufactured to meet the tough DALI specifications. The enclosure comes in a choice of Black Ash or White finish, making it blend in perfectly with most speaker designs and room decors. The entire cabinet is effectively decoupled from the floor by means of four polymer based oversized spikes. Appearing to hover above the floor the distance of 30 mm eliminates any potential turbulence from the space between the cabinet and the floor itself. Still, the proximity to the floor ensures that the benefit of having a down-firing subwoofer is maintained; a higher efficiency and more freedom in positioning. Technical Specifications: Frequency Range (+/-3 dB) [Hz]: 33 - 200 Maximum SPL [dB]: 109 Crossover Frequency [Hz]: 40 - 120 Low frequency driver, Quantity: 1 x 8" long stroke Low frequency driver, Diaphragm type: Paper Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49.0 Max. Amplifier Power Output [RMS watt]: 220 Continous IEC Power Output [RMS watt]: 170 Input Impedance [ohms]: 25k Connection Input: Mono (LFE) / RCA / Stereo (low-pass filtered) Magnetic Shielding: No Recommended Placement: Floor Recommended Distance From Wall [cm]: 10 - 30 Functions: Crossover Frequency / Phase Switch / Standby (Auto Power) On/Off / Switch / Volume (Gain) Max. Power Consumption [W]: 250 Standby Power Consumption [W]: 0.4 Idle Power Consumption[W]: 10.4 Dimensions With Base (HxWxD) [mm]: 335 x 295 x 310 Accessories Included: Manual Weight [kg]: 10.4

DALI SUB C-8 D Unlike some subwoofers the DALI SUB C-8 D has been engineered to perform equally well on both music and movies. It is very important to us that a subwoofer can render a performance true to the input signal. Though featuring a 8” down-firing woofer, the SUB C-8 D is everything but a ‘boombox’. PRODUCT DETAILS Unlike some subwoofers the DALI SUB C-8 D has been engineered to perform equally well with both music and movies. It is very important to us that a subwoofer can render a performance true to the input signal. Therefore a DALI subwoofer is everything but a ‘boombox’. Placing a subwoofer is a very large part of creating the perfect audio reproduction. We recommend placing the SUB C-8 D in a corner or if that is not possible alongside a wall. This will maximise the bass output and the distribution around the room. The compact size of the SUB C-8 D makes placing it correctly much easier than many larger subwoofers. DALI recommend using the SUB C-8 D with the ZENSOR and SPEKTOR series. Over the years our engineers have developed a set of sound design principles. Today these are applied in the creation of any DALI speaker. Naturally our subwoofers must be able to enter into any setup without sacrificing the purpose of providing wide dispersion, time coherence and low-loss performance. Therefore the DALI SUB C-8 D will feel equally at home in a movie focused surround setup as well as a compact stereo setup meant for mainly musical enjoyment. AMPLIFIER The integrated 170 Watt RMS Class D amplifier is a highly linear construction. The DALI SUB C-8 D will follow and render the required signal with an absolute minimum of bias. Designed not only for continuous power, but also for peak performances, the SUB C-8 D is able to deliver 220 Watt Peak Power. This is very relevant when it comes to both movie and music signals. To improve sound reproduction and to ensure performance under difficult circumstances, a limiter has been incorporated in the amplifier section. The integrated limiter works in two areas: It compares the input signal amplitude to the potential output signal level, and it compares the available supply voltage from the power supply to the expected output signal. If any of these comparisons show potential problem, the limiter will cut the signal in a soft manner and without affecting peak power. Fitted with controls for gain, cut-off frequency, and phase, the DALI SUB C-8 D will adapt to any front speaker and room acoustics. And with a choice of LFE and LINE inputs it can be connected to almost any amplifier, receiver or processor. The switch mode power supply is part of the reason for very low power consumption - only 0.4 Watt in standby mode. And the amplifier displays an impressive efficiency of 70%. In unison the high-efficiency amplifier section and power supply construction generate an absolute minimum of heat loss. For that reason you will find no external heat sink on the SUB C-8 D. WOOFER DALI SUB C-8 D is equipped with an 8” down-firing woofer. The cone is constructed from high-quality paper pulp resulting in a rigid cone with excellent breakup characteristics while at the same time being very lightweight and agile. The woofer engine is built around an ‘over-sized’ ferrite magnet and optimised for maximum flux within the voice coil gap. It was crucial for our project team to enable the SUB C-8 D to render the finer low frequency details in music - also at high sound pressure levels. The measured values indicate that we reached a level of control and precision that is rarely to be found in this category at all. And the numerous listening sessions has truly convinced us that this was the right way to go. The voice coil is 26.5 mm long and built for long excursions. It is vented to ensure air-cooling to the system and the benefit is a stable impedance response. The pole piece is likewise vented for maximum cooling, and here the venting also reduces internal compression in the motor system. This ensures free movement of the cone without any over/under pressure affecting the performance. Adhering to the low-loss sound design principle, the surround of the woofer is built to allow long and linear excursion. The over-sized suspension is designed to allow both weak and strong transients to turn into undistorted acoustic signals. CABINET The solid MDF cabinet is designed and manufactured to meet the tough DALI specifications. The enclosure comes in a choice of Black Ash or White finish, making it blend in perfectly with most speaker designs and room decors. The entire cabinet is effectively decoupled from the floor by means of four polymer based oversized spikes. Appearing to hover above the floor the distance of 30 mm eliminates any potential turbulence from the space between the cabinet and the floor itself. Still, the proximity to the floor ensures that the benefit of having a down-firing subwoofer is maintained; a higher efficiency and more freedom in positioning. Technical Specifications: Frequency Range (+/-3 dB) [Hz]: 33 - 200 Maximum SPL [dB]: 109 Crossover Frequency [Hz]: 40 - 120 Low frequency driver, Quantity: 1 x 8" long stroke Low frequency driver, Diaphragm type: Paper Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49.0 Max. Amplifier Power Output [RMS watt]: 220 Continous IEC Power Output [RMS watt]: 170 Input Impedance [ohms]: 25k Connection Input: Mono (LFE) / RCA / Stereo (low-pass filtered) Magnetic Shielding: No Recommended Placement: Floor Recommended Distance From Wall [cm]: 10 - 30 Functions: Crossover Frequency / Phase Switch / Standby (Auto Power) On/Off / Switch / Volume (Gain) Max. Power Consumption [W]: 250 Standby Power Consumption [W]: 0.4 Idle Power Consumption[W]: 10.4 Dimensions With Base (HxWxD) [mm]: 335 x 295 x 310 Accessories Included: Manual Weight [kg]: 10.4

KF92 is a compact, room-friendly subwoofer engineered to deepen every listening experience. Two massive 9-inch drivers in a force-cancelling configuration are powered by an immense 1000 Watts (RMS) of power. Optimised with KEF's Music Integrity Engine™, KF92 delivers astonishing levels of deep and controlled bass. Discover the detail in the deep  To reproduce serious bass you need a completely different kind of loudspeaker, one which can cope with huge pressure. KF92 is engineered to blast out huge chunks of lower frequency energy, yet is subtle enough to pick out the delicate details of a double bass. KF92 ensures you don't just feel the air move - you feel the sound move you. Perfect balance Two 9-inch drivers are positioned back to back in a force-cancelling design which cancels out the reactive forces which stress conventional subwoofers. This configuration keeps KF92 perfectly balanced so all you'll hear is deep and clean bass at sound pressure levels of upto 110db. Effortless dynamics KF92's prodigious drivers are optimised with a clever vented design which reduces viscous drag on the movement of the cone, ensuring they can keep up with even the most demanding impulses. Bespoke bass Two 9-inch KEF transducers were conceived specifically for the KF92. They feature a hybrid aluminium/paper cone and an oversized motor system and voice coil. They offer vanishingly low distortion and precision, so every bass moment is uncovered even when they are working at extremes. Music Integrity Engine™ KEF's research into digtal sound processing - Music Integrity Engine - is the brains behind KF92. Intelligent Bass Extension optimises the relationship between the amplifier, drivers and cabinet, while placement-dependant EQ allows for seamless integration into any room. Turn up the power KF92’s 1000W (RMS) of Class D amplification (500W RMS per driver) creates immense power., delivering incredible levels of control. This improves timing accuracy and dynamic response, producing a more detailed sound closer to that in the studio. More bass, less space The compact, sealed box construction improves flexibility of positioning as well as the speed and clarity of performance. The beautiful low profile heatsink ensures that the hard working electronics are kept in an optimum thermal condition.

For big sound in smaller spaces, you can’t beat ASW608, the most compact of the 600 Series subwoofers. Features :   Volume level – line in Volume level – speaker in Low-pass filter frequency Low-pass filter bypass (line in only) Bass extension Bass roll-off alignment Auto sense on / standby Phase switch Specfications: Model: ASW608 Drive unit : 200mm (8in) paper / Aramid fibre cone long-throw Power output: 200W Rated power consumption: 40W Standby power consumption: 0.5W Input impedance: 33kΩ Signal / noise: >90dB Inputs     Stereo line in (RCA Phono) Speaker in (Binding post) 12v trigger (3.5mm jack) Dimensions: Height: 260mm (10.2in) not including feet or spikes,272mm (10.7in) including feet,288mm (11.3in) including spikes Width: 260mm (10.2in) Depth: 305mm (11.99in) not including grilles,330mm (13in) including grilles and controls Net weight: 8.85kg (19.5lb)

For big sound in smaller spaces, you can’t beat ASW608, the most compact of the 600 Series subwoofers. Features :   Volume level – line in Volume level – speaker in Low-pass filter frequency Low-pass filter bypass (line in only) Bass extension Bass roll-off alignment Auto sense on / standby Phase switch Specfications: Model: ASW608 Drive unit : 200mm (8in) paper / Aramid fibre cone long-throw Power output: 200W Rated power consumption: 40W Standby power consumption: 0.5W Input impedance: 33kΩ Signal / noise: >90dB Inputs     Stereo line in (RCA Phono) Speaker in (Binding post) 12v trigger (3.5mm jack) Dimensions: Height: 260mm (10.2in) not including feet or spikes,272mm (10.7in) including feet,288mm (11.3in) including spikes Width: 260mm (10.2in) Depth: 305mm (11.99in) not including grilles,330mm (13in) including grilles and controls Net weight: 8.85kg (19.5lb)

Using the same 10-in drivers found in the flagship 800 D3 speakers and a high-efficiency 1000 watt amplifier, DB2D uses intelligent DSP to optimise bass in any room. Power and control The DB2D's digital signal processing ensures punch and control for scintillating movie effects – and to make more of your music. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specfications: Model: DB2D Description: DB Series subwoofer Technical features: 1000w Class D Hypex amplifier 2 x 250mm (10in) Aerofoil™ cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 250mm (10in) Aerofoil™ cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency response -3dB (centered on level at 100Hz): 10Hz - 350Hz Max power output: 1000W Inputs 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 430mm (16.9in) Width: 377mm (14.8in) Depth: 360mm (14.2in) Net weight: 36kg

Using the same 10-in drivers found in the flagship 800 D3 speakers and a high-efficiency 1000 watt amplifier, DB2D uses intelligent DSP to optimise bass in any room. Power and control The DB2D's digital signal processing ensures punch and control for scintillating movie effects – and to make more of your music. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specfications: Model: DB2D Description: DB Series subwoofer Technical features: 1000w Class D Hypex amplifier 2 x 250mm (10in) Aerofoil™ cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 250mm (10in) Aerofoil™ cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency response -3dB (centered on level at 100Hz): 10Hz - 350Hz Max power output: 1000W Inputs 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 430mm (16.9in) Width: 377mm (14.8in) Depth: 360mm (14.2in) Net weight: 36kg

Using the same 10-in drivers found in the flagship 800 D3 speakers and a high-efficiency 1000 watt amplifier, DB2D uses intelligent DSP to optimise bass in any room. Power and control The DB2D's digital signal processing ensures punch and control for scintillating movie effects – and to make more of your music. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specfications: Model: DB2D Description: DB Series subwoofer Technical features: 1000w Class D Hypex amplifier 2 x 250mm (10in) Aerofoil™ cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 250mm (10in) Aerofoil™ cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency response -3dB (centered on level at 100Hz): 10Hz - 350Hz Max power output: 1000W Inputs 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 430mm (16.9in) Width: 377mm (14.8in) Depth: 360mm (14.2in) Net weight: 36kg

Despite its compact dimensions, DB3D delivers astonishingly powerful, controlled bass thanks to its twin 8in Aerofoil™ drivers, 1000 watt amplifier and digital signal processing. More bass, less space Compact model packs a mighty punch. Controllable, dramatic bass from a subwoofer so small it fits almost anywhere: DB3D is a space-saving high-performance design. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specifications: Model: DB3D Description: DB Series subwoofer Technical features: 1000w Class D Hypex amplifier 2 x 200mm (8in) Aerofoil™ cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 200mm (8in) Aerofoil™ cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency response -3dB (centered on level at 100Hz): 10Hz - 350 Hz Max power output: 1000W Inputs: 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 360mm (14.1in) Width: 320mm (12.6in) Depth: 300mm (11.8in) Net weight: 25kg

Despite its compact dimensions, DB3D delivers astonishingly powerful, controlled bass thanks to its twin 8in Aerofoil™ drivers, 1000 watt amplifier and digital signal processing. More bass, less space Compact model packs a mighty punch. Controllable, dramatic bass from a subwoofer so small it fits almost anywhere: DB3D is a space-saving high-performance design. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specifications: Model: DB3D Description: DB Series subwoofer Technical features: 1000w Class D Hypex amplifier 2 x 200mm (8in) Aerofoil™ cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 200mm (8in) Aerofoil™ cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency response -3dB (centered on level at 100Hz): 10Hz - 350 Hz Max power output: 1000W Inputs: 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 360mm (14.1in) Width: 320mm (12.6in) Depth: 300mm (11.8in) Net weight: 25kg

Despite its compact dimensions, DB3D delivers astonishingly powerful, controlled bass thanks to its twin 8in Aerofoil™ drivers, 1000 watt amplifier and digital signal processing. More bass, less space Compact model packs a mighty punch. Controllable, dramatic bass from a subwoofer so small it fits almost anywhere: DB3D is a space-saving high-performance design. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specifications: Model: DB3D Description: DB Series subwoofer Technical features: 1000w Class D Hypex amplifier 2 x 200mm (8in) Aerofoil™ cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 200mm (8in) Aerofoil™ cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency response -3dB (centered on level at 100Hz): 10Hz - 350 Hz Max power output: 1000W Inputs: 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 360mm (14.1in) Width: 320mm (12.6in) Depth: 300mm (11.8in) Net weight: 25kg

Combining 2000 watts of digital amplification with twin balanced Aerofoil™ drivers for incredible low-end power and speed, DB1D is the best Bowers & Wilkins subwoofer. A smarter approach to bass DB1D's 2000 Watt amplifier and 12-inch drivers are controlled by intelligent processing for best-in-class bass delivery. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specifications: Model: DB1D Description: DB Series Subwoofer Technical features: 2000w Class D Hypex amplifier 2 x 300mm (12in) Aerofoil-cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 300mm (12in) Aerofoil-cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency Response -3dB (centered on level at 100Hz): 10Hz - 350 Hz Max Power output: 2000W Inputs: 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 460mm (18.1in) Width: 429mm (16.9in) Depth: 410mm (16.1in) Net weight: 43kg

Combining 2000 watts of digital amplification with twin balanced Aerofoil™ drivers for incredible low-end power and speed, DB1D is the best Bowers & Wilkins subwoofer. A smarter approach to bass DB1D's 2000 Watt amplifier and 12-inch drivers are controlled by intelligent processing for best-in-class bass delivery. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specifications: Model: DB1D Description: DB Series Subwoofer Technical features: 2000w Class D Hypex amplifier 2 x 300mm (12in) Aerofoil-cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 300mm (12in) Aerofoil-cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency Response -3dB (centered on level at 100Hz): 10Hz - 350 Hz Max Power output: 2000W Inputs: 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 460mm (18.1in) Width: 429mm (16.9in) Depth: 410mm (16.1in) Net weight: 43kg

Combining 2000 watts of digital amplification with twin balanced Aerofoil™ drivers for incredible low-end power and speed, DB1D is the best Bowers & Wilkins subwoofer. A smarter approach to bass DB1D's 2000 Watt amplifier and 12-inch drivers are controlled by intelligent processing for best-in-class bass delivery. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. A question of balance The back-to-back (opposed) drivers cancel out cabinet resonances, ensuring all that power is used to create room-shaking bass, not wasted vibrations. The digital advantage Digital amplification is cool-running and energy efficient, even when working hard, while Dynamic EQ and Room EQ ensure a precise sound for music and movies. Take control By placing control in the palm of your hand, our subwoofer app not only makes our DB Series subwoofers a snap to set up, it also helps maximise your sound quality. Specifications: Model: DB1D Description: DB Series Subwoofer Technical features: 2000w Class D Hypex amplifier 2 x 300mm (12in) Aerofoil-cone drive units in a balanced configuration Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Drive units: 2 x 300mm (12in) Aerofoil-cone drive units in a balanced configuration Frequency range (-6dB): 8.5Hz - 500Hz Frequency Response -3dB (centered on level at 100Hz): 10Hz - 350 Hz Max Power output: 2000W Inputs: 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Dimensions: Height: 460mm (18.1in) Width: 429mm (16.9in) Depth: 410mm (16.1in) Net weight: 43kg

A unique take on subwoofer design, PV1D uses two opposed drivers in a super-rigid enclosure to deliver fast, clean, firm solid bass for music and movies. Turn up the pressure Bring all the power of those big action movies home with the high-intensity stealth subwoofer. More bass, much less shake Along with its ultra-rigid enclosure, PV1D uses horizontally-opposed bass drivers, working back-to-back. That spreads the bass better, and also makes the whole assembly self-damping, keeping it stable and inert.  Take control The simple, intuitive touch-control panel lets you 'dial in' PV1D for use with everything from little satellite speakers to big floorstanding models: behind it is advanced digital processing to make the most of all the bass on offer. PV = Pressure Vessel™ PV1D takes its style from the inherently strong form of diving spheres and other pressure vessels: simply, it was the only shape able to handle all that power. Specfications: Model: PV1D Functions 5 Presets Input sensitivity (analogue) Gain (digital) Low-pass filter frequency Low-pass filter slope Low-pass filter phase Auto on / standby Trigger on / standby Trigger preset switching RS-232 automation control Drive units: 2x 200mm (8in) Paper-Kevlar® / Aluminum cone long-throw Power output: 400W Rated power consumption: 150W Standby power consumption: 100dB Inputs:  Stereo line in (2x RCA Phono) Speaker level in (5m cable supplied) Height: 342mm (13.5in) Width: 270mm (10.6in) Depth: 358mm (14.1in) Net weight: 18.7kg (41lb)

A unique take on subwoofer design, PV1D uses two opposed drivers in a super-rigid enclosure to deliver fast, clean, firm solid bass for music and movies. Turn up the pressure Bring all the power of those big action movies home with the high-intensity stealth subwoofer. More bass, much less shake Along with its ultra-rigid enclosure, PV1D uses horizontally-opposed bass drivers, working back-to-back. That spreads the bass better, and also makes the whole assembly self-damping, keeping it stable and inert.  Take control The simple, intuitive touch-control panel lets you 'dial in' PV1D for use with everything from little satellite speakers to big floorstanding models: behind it is advanced digital processing to make the most of all the bass on offer. PV = Pressure Vessel™ PV1D takes its style from the inherently strong form of diving spheres and other pressure vessels: simply, it was the only shape able to handle all that power. Specfications: Model: PV1D Functions 5 Presets Input sensitivity (analogue) Gain (digital) Low-pass filter frequency Low-pass filter slope Low-pass filter phase Auto on / standby Trigger on / standby Trigger preset switching RS-232 automation control Drive units: 2x 200mm (8in) Paper-Kevlar® / Aluminum cone long-throw Power output: 400W Rated power consumption: 150W Standby power consumption: 100dB Inputs:  Stereo line in (2x RCA Phono) Speaker level in (5m cable supplied) Height: 342mm (13.5in) Width: 270mm (10.6in) Depth: 358mm (14.1in) Net weight: 18.7kg (41lb)

ASW610's long-throw 250mm driver allows it to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool. Highly capable in a hi-fi or home theatre set-up Specfications: Features: Input level (line in) Input level (speaker in) Low-pass filter bypass Bass extension Bass roll-off alignment Auto sense on / standby Phase switch Description: Active closed-box subwoofer system Drive unit: ø250mm (10 in) paper / Aramid fibre cone long-throw Frequency range: -6dB at 20Hz and 25 / 140Hz adjustable (EQ at A) Frequency response: ±3dB 27Hz – 40 / 140Hz adjustable (EQ at A) Bass extension     -6dB at 20Hz (position A) -6dB at 25Hz (position B) -6dB at 30Hz (position C) Power output: 200W Rated power consumption: 40W / 0.5W standby Input impedance: 33kΩ Signal / noise: >90dB Inputs: Line in (RCA Phono) Speaker in (Binding post) 12v trigger (3.5mm jack) Low-pass filter Active 4th-order, variable cut-off frequency Dimensions:     Height: 310mm (12.2 in) not including feet or spikes, 322mm (12.7in) including feet, 338mm (13.3in) including spikes Width: 310mm (12.2 in) Depth: 347mm (13.66in) not including grilles,375mm (14.8 in) including grilles and controls Net weight: 12.5kg (27.6 lb)

ASW610's long-throw 250mm driver allows it to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool. Highly capable in a hi-fi or home theatre set-up Specfications: Features: Input level (line in) Input level (speaker in) Low-pass filter bypass Bass extension Bass roll-off alignment Auto sense on / standby Phase switch Description: Active closed-box subwoofer system Drive unit: ø250mm (10 in) paper / Aramid fibre cone long-throw Frequency range: -6dB at 20Hz and 25 / 140Hz adjustable (EQ at A) Frequency response: ±3dB 27Hz – 40 / 140Hz adjustable (EQ at A) Bass extension     -6dB at 20Hz (position A) -6dB at 25Hz (position B) -6dB at 30Hz (position C) Power output: 200W Rated power consumption: 40W / 0.5W standby Input impedance: 33kΩ Signal / noise: >90dB Inputs: Line in (RCA Phono) Speaker in (Binding post) 12v trigger (3.5mm jack) Low-pass filter Active 4th-order, variable cut-off frequency Dimensions:     Height: 310mm (12.2 in) not including feet or spikes, 322mm (12.7in) including feet, 338mm (13.3in) including spikes Width: 310mm (12.2 in) Depth: 347mm (13.66in) not including grilles,375mm (14.8 in) including grilles and controls Net weight: 12.5kg (27.6 lb)

EXCLUSIVE FORMATION® WIRELESS TECHNOLOGY Creates perfected in-room speaker synchronisation, providing the ultimate listening experience. Hear every detail in perfect harmony. PERFECTED SPEAKER SYNCHRONISATION An industry-defining, completely immersive soundstage experience, due to an imperceptible in-room 1 microsecond sync between speakers. PATENTED ROBUST MESH NETWORK Developed to run independently from your home WiFi network to ensure high-resolution audio performance throughout your home. HIGH FIDELITY STREAMING 96/24 Bit Audio Resolution streaming with twice the fidelity than the leading wireless speaker brand for the purest and clearest audio experience. QUICK & EASY SET UP Streamlined user interface takes just moments to set up and start playing. Specifications: Formation Bass Add a deeper depth of bass to your music and movies Opposed Dual Driver technology reduces distortion Powerful Class D amplifier delivers exacting performance Dynamic EQ optimises performance in real time Features Formation® Wireless Technology Sets up in moments Wirelessly connects with Formation speakers Model: Formation Bass Description: Wireless Subwoofer Technical features: Digital Signal Processing (DSP) Digital amplifier  Dynamic EQ Drive units: 2 x 165mm (6½ in) long throw bass unit  Frequency response: 20Hz to 150Hz   Amplifier power output: 250W Input voltage:100V – 240V – 50/60Hz  Power consumption Below 6 Watts  (Sleep)* Connections Network (RJ45 Ethernet or WiFi) USB – service only  Dimensions Height: 234mm (9.2 in) Width: 281mm (11.1 in) Depth: 240mm (9.4 in) Weight: 12.1kg (26.7lb) AirPlay 2 compatibility iPhone, iPad, and iPod touch with iOS 11.4 or later, Apple TV 4K or Apple TV (4th Generation) with tv OS 11.4 or later, Mac or PC with iTunes 12.8 or later.   *Formation devices have multiple radios and therefore are compliant for the ERP requirements for a HiNA device

Subwoofer Give your home cinema set-up the bass impact it deserves with DB4S – a powerful, classically styled single driver subwoofer that's a perfect match for the 700 Series. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. Powerful amplification Thanks to 1000w of digital amplification, DB4S delivers all the precision, control and authority you could ask for. Digital preamplifier DB4S uses a digital preamplifier featuring Dynamic EQ, for optimized audio performance across the available frequency range.  Control app  Adjust calibration and correction easily using DB4S dedicated smartphone app. Specifications: Technical features: 1000W Class D Hypex amplifier Aerofoil™ bass cone Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Description: Active closed-box subwoofer system Drive units:1x ø250mm (10in) Aerofoil™ cone bass Frequency range: -6dB at 8.5Hz and 500Hz Frequency response: 10Hz – 350Hz -3dB (centred on level at 100Hz) Max power output: 1000W Rated power consumption at 1/8th of rated power: 195W Standby power consumption:

Subwoofer Give your home cinema set-up the bass impact it deserves with DB4S – a powerful, classically styled single driver subwoofer that's a perfect match for the 700 Series. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. Powerful amplification Thanks to 1000w of digital amplification, DB4S delivers all the precision, control and authority you could ask for. Digital preamplifier DB4S uses a digital preamplifier featuring Dynamic EQ, for optimized audio performance across the available frequency range.  Control app  Adjust calibration and correction easily using DB4S dedicated smartphone app. Specifications: Technical features: 1000W Class D Hypex amplifier Aerofoil™ bass cone Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Description: Active closed-box subwoofer system Drive units:1x ø250mm (10in) Aerofoil™ cone bass Frequency range: -6dB at 8.5Hz and 500Hz Frequency response: 10Hz – 350Hz -3dB (centred on level at 100Hz) Max power output: 1000W Rated power consumption at 1/8th of rated power: 195W Standby power consumption:

Subwoofer Give your home cinema set-up the bass impact it deserves with DB4S – a powerful, classically styled single driver subwoofer that's a perfect match for the 700 Series. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. Powerful amplification Thanks to 1000w of digital amplification, DB4S delivers all the precision, control and authority you could ask for. Digital preamplifier DB4S uses a digital preamplifier featuring Dynamic EQ, for optimized audio performance across the available frequency range.  Control app  Adjust calibration and correction easily using DB4S dedicated smartphone app. Specifications: Technical features: 1000W Class D Hypex amplifier Aerofoil™ bass cone Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Description: Active closed-box subwoofer system Drive units:1x ø250mm (10in) Aerofoil™ cone bass Frequency range: -6dB at 8.5Hz and 500Hz Frequency response: 10Hz – 350Hz -3dB (centred on level at 100Hz) Max power output: 1000W Rated power consumption at 1/8th of rated power: 195W Standby power consumption: