Floorstandind Speakers

The Grimm Audio  LS1 is the most technologically advanced loudspeaker system ever!A good monitor combines a high degree of accuracy with untrammeled musicality. There aren't many of those around - common wisdom has it that you can have one or the other but never both. The LS1 is the first monitor to prove conventional wisdom wrong.By integrating top quality digital signal processing, converters and amplifiers in one of the speakers' legs, Grimm Audio was able to apply technical strategies no one had used before. As a consequence, the LS1 is not just a loudspeaker, but a complete audio system that only needs an analog or digital line source to perform.“This speaker is explicitly for those who want the most neutral and transparent sound reproduction, no corners were cut.”True accuracy is about getting all the bits in the right place: not losing anything, not adding anything either. The LS1 offers this accuracy, reproducing a truly musical recording accurately, with all beauty intact. At the same time, the LS1 will also reproduce any imperfection, giving you all the information you need to get it right. These qualities make the LS1 an ideal monitor for both mastering and mixing.Don't let the stylish industrial design and finish fool you: the shape of this loudspeaker is the outcome of thorough psychoacoustical and acoustical research. Its small sealed box (14 litres) is much wider than it is deep, is designed to provide an effective baffle down to around 250 Hz.That way, the LS1 achieves a reasonable constant directivity in 2π space above 250 Hz (with a natural and progressive “narrowing” of its high frequency off-axis response) minimizing many of the listening room’s detrimental effects (Psychoacoustics tells us that below about 300 Hz the ear will no longer clearly discern direct sound, first reflections or reverberant sound), while below 250 Hz the speaker gradually transitions to omnidirectional.“The wide baffle halves the volume into which the sound is radiated, thereby halving room problems as well. The cylindrical sides eliminate the classical "big box" colouration that is caused by edge diffractions.”The LS1 is suspended between two half cylinders that combat diffraction and function as an integral two-legged floor stand. An 8" magnesium woofer and a 1" dome tweeter divide the work between them. Smart use of DSP linearizes the frequency response and allows for a controlled bass response down to 35 Hz.Housed in one of the two legs are a 48/76-bit DSP, digital I/O, AD/DA converters, the same clock circuit as Grimm’s own CC1 master clock and the drive electronics, encompassing two 180W Class D power amplifiers of the groundbreaking Hypex NCore type.The concept of the LS1 draws maximum benefit from intelligent application of DSP technology. An IIR crossover imposes exact LR4 acoustic slopes crossing at 1550 Hz, and the phase is subsequently corrected using an idealised inverted all-pass filter, resulting in a maximally linear phase response without any pre-echo’s. This removes the “digital loudspeaker sound signature” typical of the more ubiquitous impulse inverted FIR designs.“The waveguide tweeter, the perfectly pistonic woofer (both by the world famous Seas company) and the very low crossover frequency insure that the sound is radiated in an unusually wide and even manner.Grimm LS1’s carefully controlled acoustics form the basis for the active DSP based filter which welds the driver responses together into the most even-handed frequency response and the fastest impulse response you'll ever hear.”The LS1 is also a very practical loudspeaker. Its digital input allows them to be connected without further ado to network players like Squeezebox or Sonos, or to a Mac or PC using the included USB converter. The pictures on the right hand show a few options.Despite their compact size, these floor standing speakers are clearly intended as main monitors in mastering studios and mixing rooms that have space to put free-standing speakers. The DSP controlled analog subwoofer output allows for easy integration with stereo subwoofers, for those that need high SPL performance below 40 Hz.By selecting Grimm’s own LS1s subwoofers, perfect integration with the main system is obtained, effectively turning the LS1 into a threeway system.More info can be found at the LS1 remote and the LS1s subwoofer page.For Measurement Charts (both in-house and third party – German Audio Magazine’s May 2013 issue) and photos of the LS1 please refer to the pictures section of this page.Features:Unidirectional down to 250 HzDSP controlled frequency curveWell-behaved off-axis responseDigital and analog audio inputsFiltered analog subwoofer outputFail safe due to excursion and thermal limiterMidi control of volume and settingsSuper low distortion NCore class D power ampsAudiophile quality Seas driversRemote control optionDifferent color scheme options Specifications:·         Frequency response: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Low corner is user-settable between 35 Hz and 100 Hz, Q=0.7 or 0.5)With the addition of the LS1s Subwoofers, the LS1 can perform almost down to the infrasonic range·         Deviation from minimum phase +/-2°·         Amplifier power: 2x180W·         Max SPL: 109dB/1m·         SNR: 114dB (unweighted)·         Crossover function: 1.55 kHz LR4, sum corrected to minimum phase.·         Latency: 2ms·         Internal volume: 14 litres·         Height: 1150mm, 1450mm - available on demand.·         Width, depth: 520mm X 160mmFurther Resources:·         Download the LS1 PC remote software

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm.The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm.The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home.absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves.The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses. The loudspeaker is the result of a passionate, tireless quest to reach perfection.There are musical experiences in life so epic that you wish they would never end. Moments so wonderfully overpowering the very thought of them makes your heart tremble, your mind go wandering and your ears yearn for more. With the new, awe inspiring DALI EPICON 8 loudspeaker you can relive that sensation, again and again.Prepare yourself for musical indulgence like never before – and for a beautifully statuesque design your guests will envy. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 50 - 500Crossover Frequency [Hz] : 550 / 3,100 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome  Midrange driver, Quantity : 1 x 6½"Midrange driver, Diaphragm type : Wood Fibre Cone Low frequency driver, Quantity : 2 x 8"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 28.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : FloorRecommended Distance From Wall [cm] : > 35Dimensions With Base (HxWxD) [mm] : 1262 x 353 x 497Dimensions (HxWxD) [mm] : 1225 x 264 x 485Weight [kg] : 47.5Accessories Included : Base Manual Micro Fibre Cloth Rubber Pads Spikes M10 Terminal Links  

The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home.absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves.The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses. The loudspeaker is the result of a passionate, tireless quest to reach perfection.There are musical experiences in life so epic that you wish they would never end. Moments so wonderfully overpowering the very thought of them makes your heart tremble, your mind go wandering and your ears yearn for more. With the new, awe inspiring DALI EPICON 8 loudspeaker you can relive that sensation, again and again.Prepare yourself for musical indulgence like never before – and for a beautifully statuesque design your guests will envy. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 50 - 500Crossover Frequency [Hz] : 550 / 3,100 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome  Midrange driver, Quantity : 1 x 6½"Midrange driver, Diaphragm type : Wood Fibre Cone Low frequency driver, Quantity : 2 x 8"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 28.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : FloorRecommended Distance From Wall [cm] : > 35Dimensions With Base (HxWxD) [mm] : 1262 x 353 x 497Dimensions (HxWxD) [mm] : 1225 x 264 x 485Weight [kg] : 47.5Accessories Included : Base Manual Micro Fibre Cloth Rubber Pads Spikes M10 Terminal Links  

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear.Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear.Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear.Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

Allow sensational musical moments to live on in the comfort of your own home with the revolutionary EPICON 6. Designed to make a lasting impression, the exterior of the loudspeaker is as captivating to the eye as the sound is to the ear.Sit back and enjoy impeccable high frequencies and voice reproductions so lifelike, you will feel as if you are in the middle of a live performance.The backbone of EPICON 6 is DALI’s new driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet System as well as the breakthrough ribbon/soft dome hybrid tweeter the sound breaks with traditional loudspeaker conventions.The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction. SMC - Linear Drive Magnet SystemFor years designing magnet systems has been a DALI specialty. For the EPICON 6 we decided to challenge the highest market standards and to take magnet system design further than ever before in order to reduce distortion generated from less than perfect magnet systems. The answer turned out to be a Soft Magnetic Compound (SMC) material which offers exactly the right physical properties: Very high magnetic conductivity and very low electrical conductivity (approx. 1/10.000’s of iron). The result is a dramatic reduction in distortion caused by mechanical loss in the magnet system. The high magnetic conductivity is instrumental in more or less eliminating the frequency depended effect of hysteresis. The electrical non-conductive nature of the SMC material eliminates the induction of modulating magnet fields in the magnet gab and significantly lowers the eddy current on the pole piece caused by the movement of the voice coil. The resulting reduction of distortion is both very clearly measurable and indeed audible. HYBRID TWEETERFor a transparent and solid rendering of even the most subtle high frequency details the finest DALI hybrid tweeter module is employed in the EPICON 6. The module consists of a newly developed 29 mm ultra lightweight dome tweeter and a 10 x 55 mm ribbon tweeter. Working in unison, the soft dome tweeter and the ribbon tweeter form the ideal high frequency solution. Combining the advantages of each tweeter’s unique properties is a technology which DALI has spent years in perfecting. Low resonance frequency, high power handling, and exceptional headroom for high sound pressure levels and extreme excursions are all characteristics of the oversized soft dome tweeter. Incorporating an ultra-thin magnetic fluid for cooling, the fluid has a very high flux saturation point for greater power handling. This also means superb control of coil movement – even at very high sound pressure levels. The ribbon tweeter features a broad frequency band and superb dispersion in the higher frequencies. Gently rolled in above 10 kHz, the ribbon reaches full contribution from 15 kHz to well beyond 30 kHz, far above the audible range. Both the soft dome and the ribbon tweeter are free of artefacts, e.g. resonances and high Q peaks within their working range. The Hybrid Tweeter Module features an extremely smooth and wide horizontal dispersion – one of our sound design trademarks. Even the detailing of the faceplate of the tweeter module is designed for optimal horizontal dispersion. WOOFERWith the background of in-depth loudspeaker driver design for years, and having engineers with loudspeaker drivers manufacturing experience in-house, DALI started up the process of establishing in-house production of drivers in 2009. Today we are proud to present the result: DALI EPICON 6 woofers are not only developed - but also manufactured at the DALI headquarters in Denmark. At DALI we believe in designs based on low mechanical loss. Actually we were among the first to insist on controlling the frequency response by carefully balanced designs. We want the amplifier voltage and current to be the factor to control the frequency response by carefully balanced designs. The wood fibre technology has proven to be a key in reproducing the finest details and dynamics in the music with very low loss of information. Wood fibres add stiffness to very light paper cone membranes, ensuring non-uniform break-up characteristics within the material. The result is a structural stiffness showing top-class behaviour. The wood fibre cone terminates in a low-loss rubber surround that is fitted to a die cast aluminium chassis. Assembly of the cone, surround, voice coil and chassis is done in highly accurate tools for the maximum alignment accuracy. CABINETWorking both as an acoustic tuned ‘spring’ for the drivers, as well as getting rid of reaction force (resonant) energy, the cabinet is an important part of the entire speaker system. A rigid construction is necessary to optimize the working environment for both woofers and tweeter. The front baffle, sides and top of the EPICON 6 are heated in a process that allows us to press it into an organic shape. This design increases overall rigidity and severely reduces cabinet resonances. Furthermore standing waves are practically eliminated as there are no parallel surfaces reflecting sound waves. With a thickness of 33 mm the dual-layer front baffle ensures that energy from the drivers is radiated as acoustic energy, and not as vibrations in the cabinet. The curved shape of the front baffle is also a contributing factor in ensuring a stable acoustic platform. At the very bottom of the cabinet, you will see that the hardwired crossover is mounted in its own enclosure - free from the dynamic variation of cabinet pressure inside the bass reflex enclosures. The finish of the cabinet is real wood veneer which is lacquered for a total of 10 times. And in between, each layer is hand polished to ensure a deep, high gloss and elegant surface. 10 times of lacquer also ensures a sturdy finish with a thickness of almost 2 mm. That means that the entire CNC cutting for drivers, ports and terminals is done after the paint process to ensure perfect fit. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 88.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 50-300.Crossover Frequency [Hz] : 700 / 2,550 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmLow frequency driver, Quantity : 2 x 6½"Bass Reflex Tuning Frequency [Hz] : 32.5Magnetic Shielding : NoRecommended Distance From Wall [cm] : > 25Dimensions With Base (HxWxD) [mm] : 1062 x 320x 459Dimensions (HxWxD) [mm] : 1025 x 232 441Weight [kg] : 30.0

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm.The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home.absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses.This incredible loudspeaker is the result of a passionate, tireless quest for perfection. Prepare yourself for true musical indulgence like never before and for a beautifully statuesque design that will grace any home. SMC TECHNOLOGYAdvanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers. IN-HOUSE MADE WOOFERSThe latest generation of the wood fibre cones, including new cone impregnation process and a new post-assembly coating. DALI EPICON woofers are not only developed - but also manufactured at the DALI headquarters in Denmark! HYBRID TWEETEROptimized for the EPICON series. Featuring an extremely smooth and wide horizontal dispersion. MULTILAYER MDFConstructed from 6 individual layers of MDF glued together to form a rigid construction that reduces cabinet resonances. The rounded shape practically eliminated standing waves.The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses. The loudspeaker is the result of a passionate, tireless quest to reach perfection.There are musical experiences in life so epic that you wish they would never end. Moments so wonderfully overpowering the very thought of them makes your heart tremble, your mind go wandering and your ears yearn for more. With the new, awe inspiring DALI EPICON 8 loudspeaker you can relive that sensation, again and again.Prepare yourself for musical indulgence like never before – and for a beautifully statuesque design your guests will envy. Specifications :Frequency Range (+/-3 dB) [Hz] : 35 - 30,000Sensitivity (2,83 V/1 m) [dB] : 89.0Nominal Impedance [ohms] : 5Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 50 - 500Crossover Frequency [Hz] : 550 / 3,100 / 15,000Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 10 x 55 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome  Midrange driver, Quantity : 1 x 6½"Midrange driver, Diaphragm type : Wood Fibre Cone Low frequency driver, Quantity : 2 x 8"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 28.0Connection Input : Bi-Amping (INT) Magnetic Shielding : NoRecommended Placement : FloorRecommended Distance From Wall [cm] : > 35Dimensions With Base (HxWxD) [mm] : 1262 x 353 x 497Dimensions (HxWxD) [mm] : 1225 x 264 x 485Weight [kg] : 47.5Accessories Included : Base Manual Micro Fibre Cloth Rubber Pads Spikes M10 Terminal Links  

Tangent’s Spectrum range of affordable hi-fi and home theatre loudspeakers offer typically Danish contemporary, stylish designs fused with high-end audio quality from compact enclosures … to create the very best in two and multi-channel applications. Latest Technology The range benefits from latest-technology drive units carefully selected by Tangent’s acoustic engineers, including a wide dispersion 25mm soft fabric dome tweeter, together with a 110mm or 130mm long throw paper coned bass driver … or an 200mm bass driver featured in the subwoofer. Danish Speaker DesignThe compact, stylish enclosures boast a solid, inert construction to reduce cabinet colouration and resonance.  Available in attractive midnight black or polar white highly durable matt satin finishes, all drive units are protective with colour-matched, integrated mesh grilles. Contrasting walnut base plinths complete the unique aesthetic appeal across the range. Spectrum X6Following the success of the X4 and X5 bookshelf/stand-mount speakers, Tangent now introduces a stunning pair of X6 3-way bass reflex floor-standing loudspeakers. Housed within the stylish and handsome cabinet enclosures, the performance is faithfully reproduced from two 130mm bass-midrange drivers together with the range generic 25 mm dome fabric tweeter … resulting in 200 watts of easy to drive power and a sensitivity rating of 88db. Make it a SystemComplete your system with the new Spectrum XC Centre speaker and Spectrum XSW-8 Subwoofer to create the ultimate multi-channel movie or music experience.  Features:Unique satin finishesFabric dome tweeterMidrange-bass driversDanish design ​Specifications:​System 3-waysSensitivity 88 dBFrequency 50Hz - 20 000HzImpedance 6 ΩPower Up to 200 wattWeight 12 / 13 kgProduct Dimensions 166 x 923 x 268 mmCarton Size 245 x 1010 x 343 mm

First, came the 3.7The 3.7 is a 3-way design, like the 3.6, but, it is a full-range ribbon design, like the highly acclaimed 1.7. We are calling it "trickle-up" technology. The concepts that worked so well in the 1.7 were incorporated in the 3.7.The 3.7 was subjected to "blind testing" by a panel of audiophiles and casual listeners. In addition to better sound, there is one more important improvement that you can test for yourself. If you have the opportunity to hear the 3.7s at your local dealer, try this experiment---Ask the dealer to place the speakers with the tweeters on the outside. Note how the imaging remains remarkably stable when seated far off-axis. With some speakers it is necessary to sit in the "sweet spot" for good imaging. If you are too far out of the sweet spot, you will hear predominately one speaker. With the tweeters on the outside, the 3.7 has the widest sweet spot of any of any previous Maggies. If you prefer to sit only in the "sweet spot", try the tweeters on the inside. Be sure the speakers are toed-in. In all cases, the tweeter should not be closer to the listener than the bass section.Then, the 3.7 became the 3.7iIn past model improvements, driver changes and factory retooling were extensive. It is rare when improvements can be made that are audible in a blind test and do not require a major investment. So, in view of this good fortune, we chose to pass on these small improvements rather than save them for a 3.8. Specifications:Trim : blackCloth : black knotFreq. Resp.: 35Hz- 40 kHz Sensitivity: 86dB/500Hz /2.83vImpedance: 4 OhmDimensions: 24 x 71 x 1.625 inches

The 20.7 is not big from an acoustical standpoint. However, the bass driver is big. If we sold the portion of the speaker from 200 Hz up, you could put it in the average apartment. Yes, it is tall, but very narrow. The ideal speaker would be a massless line-source that would look like a pole--from the floor to the ceiling. The 20.7 comes as close to that ideal as is possible with real-world devices.The 20.7 bass driver is the reason it is big. Sorry, but that is what it takes to have high definition bass.The 20.7 was subjected to "blind testing" by a panel of audiophiles and casual listeners. In addition to better sound, there is one more important improvement that you can test for yourself. If you have the opportunity to hear the 20.7s at your local dealer, try this experiment - Ask the dealer to place the speakers with the tweeters on the outside. Note how the imaging remains remarkably stable when seated far off-axis. With some speakers it is necessary to sit in the "sweet spot" for good imaging. If you are too far out of the sweet spot, you will hear predominately one speaker. With the tweeters on the outside, the 20.7 has the widest sweet spot of any of any previous Maggies. If you prefer to sit only in the "sweet spot", try the tweeters on the inside. Be sure the speakers are toed-in. In all cases, the tweeter should not be closer to the listener than the bass section. Specifications:Trim : natural oak, black, aluminium silver matt or black mattCloth : white, dark gray, black3-Way / Ribbon Tweeter - Planar-MagneticFreq. Resp.: 25-40 kHz Sensitivity: 86dB/500Hz /2.83vImpedance: 4 OhmDimensions: 29 x 79x 2.062 inches

The Triton Seven brings Speaker-of-the-Year Award winning Triton Series performance into a more compact size and even more affordable price range. Although it is the first Triton Tower without a built-in powered subwoofer, it still achieves superbly deep, subwoofer-like impactful bass performance by combining advanced drivers with our highly evolved and sophisticated bass-loading technologies. Mike Mettler of Sound&Vision called the Triton Seven a “real reference speaker for $1400 a pair...they’ll likely become your next reference speakers, just as they've become mine”.Like the Five, the Seven’s strikingly attractive and acoustically purposeful cabinet provides the same performance benefits, as well as looking great. The Seven’s precise and totally boxless imaging characteristics are further enhanced by the narrow front baffle. A complex Linkwitz/Riley crossover perfectly blends the D'Appolito Arrayed twin 5-1/4" cast basket bass/midrange drivers specifically designed for exceptionally long-throw, for tremendous dynamic range and extraordinarily deep bass response. These surround the same signature High Velocity Folded Ribbon (HVFR™) tweeter for high-resolution reproduction of both music and cinema. And dual side-mounted inertially-balanced, planar sub-bass radiators deliver impactful, superbly detailed, subwoofer-quality bass performance. The Triton Seven’s high-resolution sonic performance makes it perfect for the highest quality two channel systems as well as the best multi-channel music and home theater systems. Features:Frequency Response 29 Hz - 35 kHzEfficiency 89 dBNominal Impedance Compatible with 8 ohmsDriver Complement Two - 5-1/4˝ High-Definition Cast-BasketMid/Bass Drivers, coupled to:Two - 8˝ Planar Sub-Bass RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification 10 - 300 watt/channelDimensions(height is with base installed, no spikes): 5-3/4˝ W (front) x 7-1/4˝ W (rear) x 11˝ D x 39-3/4˝ HBase: 10-1/2˝ W x 14-1/2˝ DWeight :  32 lbs (product) / 42 lbs (shipping) 

The Triton Five is a larger version of the Award Winning Triton Seven, with greater dynamic range and even deeper bass extension, plus important refinements carried over from the Triton One development program. As with all of our Triton Towers, the Triton Five’s high-resolution sonic performance makes it ideal for use in two channel systems of the highest quality, as well as complete multi-channel surround music and home theater systems. “They absolutely rock the speaker world’s foundation to the core … delivering the kind of musical bliss some pay upwards of $10,000 for”, raves Caleb Denison of Digital Trends.The Five’s unique cabinet shape is both acoustically purposeful as well as strikingly attractive. Its narrow front baffle and stylish rearward rake, in conjunction with the complex crossover, both aligns the driver array precisely for a coherent wave-launch directed at ear level at the listening position, as well as results in non-parallel front and rear baffles for better control of internal standing waves. And, the non-parallel side cabinet walls and slanted top provide the same acoustical performance benefit.A D’Appolito array of two newly developed 6" long-throw midrange/bass drivers surround the same High Velocity Folded Ribbon Tweeter (HVFR™) used in all the Triton Towers. The Five incorporates FOUR side-mounted, opposing, inertially-balanced planar sub-bass radiators, located on either side of the cabinet down near the floor for optimum coupling to the room. And the Fives will deliver exceptional performance with moderately priced receivers, while also allowing you to appreciate the subtle qualities of the world’s finest audio components. Features:Frequency Response: 26 Hz - 35 kHzEfficiency: 90 dBNominal Impedance Compatible with 8 ohmsDriver Complement Two - 6˝ High-Definition Cast-BasketMid/Bass Drivers, coupled to:Four - 8˝ Planar Sub-Bass RadiatorsOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification 15 - 400 watt/channelDimensions (height is with base installed, no spikes) 6-5/8˝ W (front) x 8-1/8˝ W (rear) x 12-3/8˝ D x 44-1/4˝ HBase: 11˝ W x 16-1/2˝ D​

The Triton Three+ incorporates the same advanced technologies and delivers state-of-the-art performance remarkably similar to its bigger brothers. The Triton Three+ is literally a smaller version of the award-winning Triton One and Triton Two+. It is the perfect solution for listeners looking for a more compact loudspeaker that offers equally superb performance for both high-quality two-channel systems as well as in multi-channel home theater and music systems.Like the Triton Two+, the newly updated Triton Three+ incorporates technologies developed for the Triton One. Its built-in powered subwoofer (a technology first pioneered by GoldenEar principals Sandy Gross and Don Givogue) includes an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5" x 9" quadratic subwoofer driver. This is coupled to two opposing, inertially balanced 6-3/4" x 8" quadratic planar infrasonic passive radiators which are located on the sides, near the floor, in order to take full advantage of boundary coupling.There is one of the same 4.5" high-definition spider-leg, cast-basket MVPP™ drivers as used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon (HVFR™) tweeter. Performance-wise, the Triton Three+ delivers the same boxless three-dimensional imaging as the bigger Tritons. Likewise, the powerful, deep subwoofer bass blends perfectly with the silky smooth, utterly transparent midrange and high frequencies, putting many dramatically more expensive speakers to shame. Features:Frequency Response: 21 Hz - 35 kHzEfficiency: 90 dBNominal Impedance Compatible with 8 ohmsDriver Complement:One - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Driver, coupled to:Two - 6-3/4˝ x 8˝ Quadratic Planar Infrasonic RadiatorsOne - 4-1/2˝ High-Definition  Cast-Basket MVPP™ Upper-Bass/Mid DriverOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 400 watt/channelBuilt-In SubwooferPower Amplification: 800 watt ForceField AmplifierDimensions: 5-1/4˝ W (front) x 7˝ W (rear)  x 13˝ D x 44˝ H (height is with base installed, no spikes)Base: 11-1/2˝ W x 16-1/4˝ D

GoldenEar’s Triton Two Tower clearly set the audio world on its proverbial ear with extraordinary sound quality, elegant styling and previously unimaginable value. It has earned an incredible series of rave reviews and industry accolades from around the world — including more than a few Speaker of the Year and Audio Product of the Year honors and awards. "Listening with them paralleled previous encounters with no-holds-barred speakers - ones priced upwards of $50,000.", raved Al Griffin of Sound & Vision.The sleek, 48" tall Triton Two+ is newly updated to now incorporate many of the new technologies and refinements developed for the Triton One, including: a fully balanced crossover design, high-end film capacitors, redesigned midrange/upper-bass drivers, and a reprogrammed DSP. Its built-in subwoofer section is powered by a 1200 watt GoldenEar ForceField digital amplifier driving two 5" x 9" front-mounted quadratic subwoofer bass drivers coupled to dual opposing side-mounted, inertially-balanced, 7" x 10" quadratic planar infrasonic bass radiators. The two 4-1/2" spider-leg cast-basket midrange/upper bass drivers, which incorporate GoldenEar’s proprietary Multi-Vaned Phase Plug (MVPP™) design, are housed in dual discreet chambers arranged in a D’Appolito array surrounding GoldenEar’s extraordinary High-Velocity Folded Ribbon (HVFR™) tweeter design. The Triton Two's dynamic, effortless, you-are-there clarity will almost literally put the live performance or action right into your home, or conversely, put you into the concert hall or the live action on the screen.  Features:Frequency Response: 16 Hz - 35 kHzEfficiency: 91 dBNominal Impedance Compatible with 8 ohmsDriver Complement:Two - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Drivers, coupled to:Two - 7˝ x 10˝ Quadratic Planar Infrasonic RadiatorsTwo - 4-1/2" High-Definition Cast-Basket MVPP™ Upper-Bass/Mid DriversOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification: 20 - 500 watt/channelBuilt-In SubwooferPower Amplification: 1200 watt ForceField AmplifierDimensions: 5-1/4˝ W (front) x 7-1/2˝ W (rear) x 15˝ D x 48˝ H (height is with base installed, no spikes)Base: 11-1/2˝ W x 18˝ D

The Triton One is an evolutionary speaker that builds upon all the advanced technologies that have made the Tritons famous. (In response to questions, there is no Triton One+ coming. The "+" in the new Triton Three+ and Two+ is technology already in the One.) The sleek 54" tall Triton One's upgraded technology includes a 56 bit DSP engine for the sub section, a fully balanced crossover design, high-end film capacitors, advanced cabinet design, and much more. The Triton One includes a built-in subwoofer section powered by a 1600 watt GoldenEar ForceField digital amplifier.The amp drives three 5" x 9" front-mounted quadratic subwoofer bass drivers which are coupled to dual (per side) side-mounted 7" x 10" quadratic planar infrasonic bass radiators. Our newly developed Frequency Dependent Bass Loading Technology, utilizing open-cell polyurethane foam damping pads, as well as special hollow-fiberfill, further optimizes low-frequency performance.There are two newly designed 5-1/4" cast-basket midrange/upper bass drivers, which incorporate GoldenEar’s proprietary Multi-Vaned Phase Plug (MVPP™) design, housed in dual discreet midrange chambers, arranged in a D’Appolito array surrounding the extraordinary GoldenEar High-Velocity Folded Ribbon (HVFR™) tweeter.The result is a superb, Loudspeaker-of-the-Year award winning reference home audio and home theater loudspeaker that has performance equal to, and in many cases surpassing, speakers selling for ten times its cost. Features:Dimensions (height is with base installed, no spikes):5-3/4˝ W (front) x 8˝ W (rear) x 16-5/8˝ D x 54˝ HBase: 12-3/8˝ W x 19-3/4˝ DWeight: 80 lbs (product) / 99 lbs (shipping)Frequency Response: 14 Hz - 35 kHzEfficiency: 92 dBNominal Impedance: Compatible with 8 ohmsDriver Complement:Three - 5˝ x 9˝ Long-Throw Quadratic Subwoofer Bass Drivers, coupled to:Four - 7˝ x 10˝ Quadratic Planar Infrasonic RadiatorsTwo - 5-1/4" High-DefinitionCast-Basket MVPP™Upper-Bass/Mid DriversOne - HVFR™ High-Velocity Folded Ribbon TweeterRecommended Amplification 20 - 650 watt/channelBuilt-In Subwoofer Power Amplification: 1600 watt ForceField Amplifier 

We heard you —“The 1.7 is too big for my small room.”So, we down-sized the 1.7 and called it the “.7”. It was that simple. Most all of what you read about the 1.7 applies to the .7.Ok, not everything. Because the .7 has a smaller bass diaphragm, it has less “bite on the air.” Consequently, the bass will be less than the 1.7 if you wish to use it in a larger room. However, the DWM Bass Panel can be used to supplement the bass.The .7 offers full-range, quasi-ribbon technology at a price that some audiophiles spend for speaker cables. Value is what Magneplanars are all about.The .7 has an optional oval base as shown below for modern decors.For those that have followed the "i" upgrades of the 3.7 and 1.7, the improvements of the 3.7i and 1.7i were incorporated into the .7.The .7 was subjected to "blind testing" by a panel of audiophiles and casual listeners. In addition to better sound, there is one more important improvement that you can test for yourself. If you have the opportunity to hear the .7s at your local dealer, try this experiment---Ask the dealer to place the speakers with the tweeters on the outside. Note how the imaging remains remarkably stable when seated far off-axis. With some speakers it is necessary to sit in the "sweet spot" for good imaging. If you are too far out of the sweet spot, you will hear predominately one speaker. With the tweeters on the outside, the .7 has the widest sweet spot of any of any previous Maggies. If you prefer to sit only in the "sweet spot", try the tweeters on the inside. Be sure the speakers are toed-in. In all cases, the tweeter should not be closer to the listener than the bass section. Specifications:Freq. Resp: 45-22kHz ±3dBSensitivity: 86dB/500Hz /2.83vImpedance: 4 ΩDimensions: 15 w x 54 H x 1 D inches

The 1.7 is a departure from Magnepan’s 41-year history of using planar magnetic drivers for the bass or lower midrange. The use of quasi ribbon technology down into the lower midrange and bass will provide a new level of coherence.The 1.7i is not big from an acoustical standpoint. However, the bass driver is big. If we sold the portion of the speaker from 200 Hz up, you could put it in the average apartment. Yes, it is tall, but very narrow. The ideal speaker would be a massless line-source that would look like a pole--from the floor to the ceiling. The 1.7i comes as close to that ideal as is possible with real-world devices.The 1.7i bass driver is the reason it is big. Sorry, but that is what it takes to have high definition bass (We are not fans of hybrid speakers).Need more bass?Put a big speaker in a small room, too much bass. Put a small speaker in big room, too little bass. In general, it is true. There is no one-size-fits-all. In an ideal world, the bass diaphragm would be like an accordion which could be expanded to exactly fit the needs of your acoustical environment.Magnepan now provides more options for getting the bass and frequency balance just right for your particular room. The relative levels of the bass and tweeter/super-tweeter can be adjusted. If that does not achieve a smooth balance in your room, bass diaphragm area can be added with one or more Maggie Bass Panels. Specifications:Trim : blackCloth : black knot3-Way, Full-Range, Quasi-RibbonFreq. Resp.: 40-24 kHz Sensitivity: 86dB/500Hz /2.83vImpedance: 4 OhmDimensions: 19 x 65 x 2 inches

The Radius 270 houses a precision-crafted Radius driver system of twin 100mm (4”) C-CAM® mid/bass drivers and a 25mm (1”) C-CAM tweeter. Pair with the 225 or 200 for scintillating home theatre audio, or with the 380/390 sub in a discreet two-channel system. Features:Ultra-slim depth of just 40mm (1½") complements the slimmest TV screens.Designed and tuned to provide optimum sound quality when flush wall mounted.Black anodised aluminium finish for excellent aesthetic results.Easy installation: flat to wall fixings, invisible cable entry/connection and a removable magnetic grille make installation simple and seamless.A single alloy extrusion provides a slender profile, maximises the internal cabinet volume and offers high rigidity to suppress resonance.A specially developed 25mm C-CAM® tweeter features a unique venting and rear loading chamber for low resonance and clean pure sound down to the low frequency crossover point.4" low profile bass-midrange drivers feature a flat RDT® sandwich diaphragm constructed from C-CAM® and Rohacell materials.Unique 'floating' driver mounting reduces colouration: the drivers bolt to the rear of the cabinet and are de-coupled from the baffle at the front in an airtight neoprene seal.A special 'concertina' driver suspension design provides high excursion from a low profile assembly.4" low profile ABR drivers are individually tuned, providing punchy bass without the noise associated with ported designs.Specifications:Frequency Response: 80Hz – 30kHzSensitivity: 87dBSystem Configuration: 2- wayDriver complement: 2 x 4″ flat diaphragm mid-bass drivers ABR drivers: 2 x 4″ flat diaphragm C-CAM® tweeter: 1 x 25mm With vented loading systemNominal  Impedance: 8 ohmsMaximum SPL (each @1M): 108.6 dBAPower HandlingWith amplifier crossover set to: 120 watts80Hz@12dB/OctaveRecommended Amplifier Requirements: 40-120 wattsBass Alignment ABR loading 

The Radius 270 houses a precision-crafted Radius driver system of twin 100mm (4”) C-CAM® mid/bass drivers and a 25mm (1”) C-CAM tweeter. Pair with the 225 or 200 for scintillating home theatre audio, or with the 380/390 sub in a discreet two-channel system. Features:New 4” C-CAM® bass driver - Radius features all new bass drivers with concave cone profiles, introduced by our top-of-the-range Platinum speakers and applied subsequently to Gold GX.  Extensive research and FEA modelling have allowed us to perfect the relationship between the new radiating diaphragm and its motor design, introducing larger motor sizes and voice coils for increased excursion, higher power capability and reduced distortion.New C-CAM gold dome tweeter - optimised to deliver the finest and widest performance within the compact Radius cabinets. It benefits from a more efficient rear-venting design, releasing air trapped and compressed at the back of the tweeter dome, and guiding it around the drive assembly to a rear-loading chamber.HiVe®II port design - Straight from Platinum’s design blueprint, the HiVe reflex port makes its Radius debut. It’s shaped to have the same effect on airflow as a gun-barrel on a bullet. Rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently, for a faster more dynamic bass response.Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.Front and rear ported reflex designSpecifications:Frequency Response: 50Hz – 35KHzSensitivity: 87dBNominal  Impedance: 6 ohmsPower Handling Single (RMS): 100 wattsSystem Power Handling (RMS): 150 wattsRecommended Amplifier Requirements: 40-150 wattsMaximum SPL (dBA): 107 Bass Alignment Bass reflex Front and rear ported Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid driver 1 x 1” (25mm) C-CAM gold dome tweeterCabinet Dimensions (H x W x D): 1000 x 177 x 208mm (393/8 x 615/16 x 83/16 Inches) Inc PlinthWithout Spikes Cabinet Dimensions (H x W x D): (Inc Grille & Terminals) 1025 x 177 x 208mm>(403/8 x 615/16 x 83/16 Inches) Inc Plinth, With SpikesWeight: 9.9kg (21lb 12oz)Finishes:  WalnutFrequency Response: 80Hz – 30kHz

The SX80s offer the power and presence of floorstanders at an unrivalled price point. They combine our years of h-fi expertise with cutting edge custom components to bring you a musical performance of scale and enjoyment.The SX80’s crossover is optimised for the most neutral, smooth and phase linear response, giving you a natural and immersive sound stage.All the decisions we make whilst designing our products are made to make your music and movies sound amazing. The SX80s use highly optimised woofer magnet systems to deliver controlled bass and high efficiency.We use a specifically treated paper cone to provide a smooth and even frequency response. And our silk dome tweeter delivers perfect accuracy and detail to ensure you hear every beat and every line of your music and movies exactly as they were intended.Specifications:Sensitivity: 87dBFrequency Response: 40Hz – 20kHzImpedance: 8 OhmsDrive units: 2 x 165mm (6.5’’) woofers1 x 25mm (1’’) silk dome tweeterPorted: 1 frontColour: BlackDimensions:  (WxHxD): 240 x 980 x 338mm (9.4 x 38.6 x 13.3″)Weight: 16.9kg (37.3lbs) each

EL 210 is a three-way speaker.  Its 21 cm- diameter boomer-medium can reproduce deep and striking bass sounds.  The medium speaker ensures the natural and realistic reproduction of voices, whereas the tweeter ensures a subtle and detailed reproduction of trebles, exempt from any harshness.The cabinet of the speakers Advance Acoustic is built of medium, reinforcements and internal partitions insure perfect rigidity to avoid the development of vibrations. The energy reflected on the internal walls of the speaker creates stationary waves. To eliminate these interferences causing a colored listening, we developed the BSW system (Breaking Stationary Wave).Specifications:Frequency Response: (+/-3 DB ) 33 Hz - 21 kHzPower Impulse: 250 WCrossover Frequency: 80 Hz - 2,9 kHzCrossover Attenuation: 4 X 12 dB / OctaveEfficiency: 88 dB / 1W / 1 mImpedance: 8 ΩImpedance mini: 6 ΩWoofer: 21 cmMedium: 17 cmTweeter: 2,5 cmDimensions (H X W X D) Cm 108 X 21 X 37Net Weight/Gross Weight 28 / 30 kg

Advance EL 200 floorstanding speaker.Specifications:Frequency Response: (+/-3 DB ) 45 Hz-27 kHzPower Impulse: 150 WCrossover Frequency: 2,9 KHzEfficiency: 90 dBImpedance: 8 ΩImpedance Mini: 6 ΩWoofer: 17 CMTweeter: 2,5 cm

The Radius 270 houses a precision-crafted Radius driver system of twin 100mm (4”) C-CAM® mid/bass drivers and a 25mm (1”) C-CAM tweeter. Pair with the 225 or 200 for scintillating home theatre audio, or with the 380/390 sub in a discreet two-channel system.  Features: New 4” C-CAM® bass driver - Radius features all new bass drivers with concave cone profiles, introduced by our top-of-the-range Platinum speakers and applied subsequently to Gold GX.  Extensive research and FEA modelling have allowed us to perfect the relationship between the new radiating diaphragm and its motor design, introducing larger motor sizes and voice coils for increased excursion, higher power capability and reduced distortion. New C-CAM gold dome tweeter - optimised to deliver the finest and widest performance within the compact Radius cabinets. It benefits from a more efficient rear-venting design, releasing air trapped and compressed at the back of the tweeter dome, and guiding it around the drive assembly to a rear-loading chamber. HiVe®II port design - Straight from Platinum’s design blueprint, the HiVe reflex port makes its Radius debut. It’s shaped to have the same effect on airflow as a gun-barrel on a bullet. Rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently, for a faster more dynamic bass response. Single through-bolt driver fixing provides mechanical de-coupling and enhanced mid-band clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet. Front and rear ported reflex design Specifications: Frequency Response: 50Hz – 35KHz Sensitivity: 87dB Nominal  Impedance: 6 ohms Power Handling Single (RMS): 100 watts System Power Handling (RMS): 150 watts Recommended Amplifier Requirements: 40-150 watts Maximum SPL (dBA): 107 Bass Alignment Bass reflex  Front and rear ported Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid driver 1 x 1” (25mm) C-CAM gold dome tweeter Cabinet Dimensions (H x W x D): 1000 x 177 x 208mm (393/8 x 615/16 x 83/16 Inches) Inc Plinth Without Spikes Cabinet Dimensions (H x W x D): (Inc Grille & Terminals) 1025 x 177 x 208mm>(403/8 x 615/16 x 83/16 Inches) Inc Plinth, With Spikes Weight: 9.9kg (21lb 12oz) Finishes:  White Gloss Frequency Response: 80Hz – 30kHz

This loudspeaker offers an excellent compromise between performance and size. Thanks to its 6,5" diameter, the bass driver will assist the midrange driver to reproduce its frequency range. Recommended for a 215-430 sq ft (20-40 m2) room. Specifications:Type: floorstanderNumber of ways: 2,5 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 41.7 x 14.6 x 15Dimensions inches with stand: 42 x 14.6 x 15Weiht (lbs): 44Tweeter: TZ2500Midrange: T16EF84SMD1Boomer: T16EF100SGC1Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 45-20Permissible Power (W): 100Repetitive Peak Power (W): 200Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 4,4Low Roll-off Frequency (Hz): 250Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2500Hz / 24dB/Oct

This is the most complete loudspeaker of the range.The 5" midrange driver was developed exclusively for this model. It’s ideal for large rooms and the exceptional sound reproduction of its two bass drivers will transport you to theheart of the concert hall.Recommended for a 320-540 sq ft (30-50 m2) room.Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 44.9 x 14.6 x 15Dimensions inches with stand: 45 x 14.6 x 15Weight (lbs): 49.5Tweeter: TZ2500Midrange: T13EF84SMD1Boomer: T16EF100SGC1Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 40-20Permissible Power (W): 120Repetitive Peak Power (W): 240Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 3,4Low Roll-off Frequency (Hz): 250Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2500Hz / 24dB/Oct

This is the most complete loudspeaker of the range.The 5" midrange driver was developed exclusively for this model. It’s ideal for large rooms and the exceptional sound reproduction of its two bass drivers will transport you to theheart of the concert hall.Recommended for a 320-540 sq ft (30-50 m2) room.Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 44.9 x 14.6 x 15Dimensions inches with stand: 45 x 14.6 x 15Weight (lbs): 49.5Tweeter: TZ2500Midrange: T13EF84SMD1Boomer: T16EF100SGC1Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 40-20Permissible Power (W): 120Repetitive Peak Power (W): 240Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 3,4Low Roll-off Frequency (Hz): 250Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2500Hz / 24dB/Oct

After removing its protective cover, just like you would a musical instrument, you will love the sheer personality of the QUARTET. Its technology allows it to get as close as possible to real live sound, thus reproducing either the subtlety of an opera or the high energy sound of a rock concert.Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 46.1 x 9.2 x 14.6Dimensions inches with stand: 48.4 x 14.5 x 15.1Weight (lbs): 57.2Tweeter: TZ2500Midrange: T16EF100SMD1Boomer: T16EF100SGC2Sensitivity (dB/2,83 V/m): 92Bandwidth (+-3dB Hz-kHz): 32-20Permissible Power (W): 120Repetitive Peak Power (W): 240Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 3,2Low Roll-off Frequency (Hz): 250Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2300Hz / 24dB/Oct

After removing its protective cover, just like you would a musical instrument, you will love the sheer personality of the QUARTET. Its technology allows it to get as close as possible to real live sound, thus reproducing either the subtlety of an opera or the high energy sound of a rock concert.Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 46.1 x 9.2 x 14.6Dimensions inches with stand: 48.4 x 14.5 x 15.1Weight (lbs): 57.2Tweeter: TZ2500Midrange: T16EF100SMD1Boomer: T16EF100SGC2Sensitivity (dB/2,83 V/m): 92Bandwidth (+-3dB Hz-kHz): 32-20Permissible Power (W): 120Repetitive Peak Power (W): 240Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 3,2Low Roll-off Frequency (Hz): 250Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2300Hz / 24dB/Oct

This loudspeaker with its thrilling design features and musicality brings sound image analysis and precision up to a higher level. Power and control are the two words which best describe LYRR, a prestigious speaker in the finest TRIANGLE tradition. Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 50 x 9.2 x 14.6Dimensions inches with stand: 52.3 x 14.5 x 15.1Weight (lbs): 66Tweeter: TZ2500Midrange: T16EF100SMD1Boomer: T16EF100BMGC1Sensitivity (dB/2,83 V/m): 92Bandwidth (+-3dB Hz-kHz): 32-20Permissible Power (W): 140Repetitive Peak Power (W): 280Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 3Low Roll-off Frequency (Hz): 250Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2300Hz / 24dB/Oct

This loudspeaker with its thrilling design features and musicality brings sound image analysis and precision up to a higher level. Power and control are the two words which best describe LYRR, a prestigious speaker in the finest TRIANGLE tradition. Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 50 x 9.2 x 14.6Dimensions inches with stand: 52.3 x 14.5 x 15.1Weight (lbs): 66Tweeter: TZ2500Midrange: T16EF100SMD1Boomer: T16EF100BMGC1Sensitivity (dB/2,83 V/m): 92Bandwidth (+-3dB Hz-kHz): 32-20Permissible Power (W): 140Repetitive Peak Power (W): 280Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 3Low Roll-off Frequency (Hz): 250Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2300Hz / 24dB/Oct

The reference loudspeaker.When listening to this loudspeaker, the magic of music unfurls before you. triangle has succeeded in adapting the performances and the immaculate control of the magellan Grand Concert to this reasonably sized loudspeaker.Cello provides that extra something which conveys the intense emotion of a musical performance without appearing to make any particular effort.The listening experience is pure unlimited pleasure regardless of the type of music, delivered with magnificent scale and it’s never tiring. It has a wide array of musical skills. It’s as perfectly at ease at high volume level as it is for intimate listening, and is suitable for rooms measuring 25 to 50 m2. The sandwich technology developed by the aerospace industry ensures that the two bass drivers are extremely lightweight and also particularly rigid. High-gloss lacquer finish available also in Black, White, or Bubinga (Call/email for availability) SpecificationsType: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 44.8 x 16.7 x 14.6Weight (lbs): 74.8Tweeter: TZ2900Midrange: T16PG110ocBoomer: T16GM110c (x2)Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 35-20Permissible Power (W): 200Repetitive Peak Power (W): 350SPL max (db): 112Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 3Low Roll-off Frequency (Hz): 400Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2800Hz / 24dB/Oct

Sound image has now entered a new dimension. Quatuor masters the stage with such elegance. The rear tweeter has opened wide the gates to freedom. It is stylishly sleek and refined.You can easily imagine the musicians playing pianissimo to the rear of the orchestra. Quatuor lets you listen to music without having to ask yourself any questions. Three 16 cm speakers producing powerful, full- bodied bass can deal just as easily with modern types of music as they can with a prestigious string quartet or a cello suite.High-gloss lacquer finish available also in Black, White, or Bubinga (Call/email for availability) Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 52.7 x 16.7 x 14.6Weight (lbs): 99Tweeter: TZ2900 (x2)Midrange: T16PG110ocBoomer: T16GM205c (x3)Sensitivity (dB/2,83 V/m): 90Bandwidth (+-3dB Hz-kHz): 33-20Permissible Power (W): 260Repetitive Peak Power (W): 500SPL max (db): 113Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 3Low Roll-off Frequency (Hz): 400Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2800Hz / 24dB/Oct

A grand dameThis is a music lover’s loudspeaker par excellence, and faithfully reproduces each musical detail. The Concerto is capable of letting leash the full force of a symphonic orchestra or delicately revealing the slightest inflection of a single voice. It can deal with all types of music with extreme ease, from the most intangible to the most frantic.Explosive dynamics, deep bass, crisp treble and emphasis on tonal quality: it’s all in there and brought together effectively to produce a sense of openness. The optimized sound layering makes you forget you are listening to a loudspeaker.This true to life experience is the result of the determined efforts of the men and women who make up the triangle team, and their deep passion for music.The filter, which is designed according to the same stringent quality standards as all of the loudspeaker’s components, orchestrates this masterpiece wonderfully.High-gloss lacquer finish available also in Black, White, or Bubinga (Call/email for availability) Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 63 x 23.6 x 17.7Weight (lbs): 143Tweeter: TZ2900 (x2)Midrange: T16PG110oc (x2)Boomer: T21MG316c (x3)Sensitivity (dB/2,83 V/m): 90Bandwidth (+-3dB Hz-kHz): 32-20Permissible Power (W): 300Repetitive Peak Power (W): 600SPL max (db): 114Nominal Impedance (Ohms): 4Minimum Impedance (Ohms): 2,5Low Roll-off Frequency (Hz): 300Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2500Hz / 24dB/Oct 

The flag shipIts structure comprises three distinct enclosures designed to ensure elimination of standing waves and vibration. The considerable weight of the loudspeaker (100 kg) required the development of the new exclusive Fixocal locking system, which locks the three enclosures together with up to 1.6 tons of clamping pressure.Grand Concert is not just a technological showcase; all of triangle’s passion for music has gone into it. We have pushed our thrive for perfection to its limit.Bass is abysmally deep, the mids and highs simply go beyond the walls, you can feel the ambiance in the hall and it is totally gripping. At last, you can now enjoy a genuinely realistic listening experience. With the Grand Concert, triangle’s engineers have managed to blend together seemingly incompatible elements: the full texture of the timbre coupled with sublime airiness and power which conserves all its femininity.In collaboration with Hutchinson, we developed an exclusive coupling process for the T16PG midrange driver. The resulting elimination of any vibration creates a sound image which is totally transparent and exceptionally sharp. This principle of mechanical coupling is drawn upon for the configuration of the filters which are separate and isolated, each one functioning uniquely within its own individual module. Specifications:Type: floorstanderNumber of ways: 3 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 84.6 x 23.6 x 17.7Weight (lbs): 220Tweeter: TZ2900 (x2)Midrange: T16PG110oc (x2)Boomer: T21MG216c (x4)Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 28-20Permissible Power (W): 400Repetitive Peak Power (W): 800SPL max (db): 116Nominal Impedance (Ohms): 4Minimum Impedance (Ohms): 2,5Low Roll-off Frequency (Hz): 300Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2800Hz / 24dB/Oct

This loudspeaker offers an excellent compromise between performance and size. Thanks to its 6,5" diameter, the bass driver will assist the midrange driver to reproduce its frequency range.Recommended for a 215-430 sq ft (20-40 m2) room. Specifications:Type: floorstanderNumber of ways: 2,5 ways bass-reflexWiring: bi-wiringDimensions inches (H x W x D): 41.7 x 14.6 x 15Dimensions inches with stand: 42 x 14.6 x 15Weiht (lbs): 44Tweeter: TZ2500Midrange: T16EF84SMD1Boomer: T16EF100SGC1Sensitivity (dB/2,83 V/m): 91Bandwidth (+-3dB Hz-kHz): 45-20Permissible Power (W): 100Repetitive Peak Power (W): 200Nominal Impedance (Ohms): 8Minimum Impedance (Ohms): 4,4Low Roll-off Frequency (Hz): 250Hz / 12dB/OctHigh Roll-off Frequency (Hz): 2500Hz / 24dB/Oct

Compact and hi-tech, the color floorstander offers you magnificent sound sensations. Its two 16cm bass loudspeakers provide powerful and dynamic bass. The development of its components such as the filter and loudspeakers has benefitted from technological progress made by the latest Magellan program. The color floorstander lets you in to discover the quality of TRIANGLE soundSpecifications: sensitivity90 dB/2,83 V/ 1mbandwidth45 Hz – 24 KHz (+/- 3 dB)power handling100 Wrepetitive peak power200 Wnumber of channels3nominal impedance6 Ωminimum impedance3,9 Ωfrequency roll-off - bass400 Hzfrequency roll-off - treble3,0 kHzDimensions965 x 188 x 275mmweight15,50 kg 

Compact and hi-tech, the color floorstander offers you magnificent sound sensations. Its two 16cm bass loudspeakers provide powerful and dynamic bass. The development of its components such as the filter and loudspeakers has benefitted from technological progress made by the latest Magellan program. The color floorstander lets you in to discover the quality of TRIANGLE soundSpecifications: sensitivity90 dB/2,83 V/ 1mbandwidth45 Hz – 24 KHz (+/- 3 dB)power handling100 Wrepetitive peak power200 Wnumber of channels3nominal impedance6 Ωminimum impedance3,9 Ωfrequency roll-off - bass400 Hzfrequency roll-off - treble3,0 kHzDimensions965 x 188 x 275mmweight15,50 kg 

Compact and hi-tech, the color floorstander offers you magnificent sound sensations. Its two 16cm bass loudspeakers provide powerful and dynamic bass. The development of its components such as the filter and loudspeakers has benefitted from technological progress made by the latest Magellan program. The color floorstander lets you in to discover the quality of TRIANGLE soundSpecifications: sensitivity90 dB/2,83 V/ 1mbandwidth45 Hz – 24 KHz (+/- 3 dB)power handling100 Wrepetitive peak power200 Wnumber of channels3nominal impedance6 Ωminimum impedance3,9 Ωfrequency roll-off - bass400 Hzfrequency roll-off - treble3,0 kHzDimensions965 x 188 x 275mmweight15,50 kg