PA Amplifiers

This 8-channel bridgeable power amplifier is all about versatility. Combined with a pre-amplifier or matrix, the REVAMP8250 can be used to create 8 zones in mono, 4 zones in stereo, even 4 bridged mono or 2 bridged stereo systems can be created. The amplifier has an intelligent variable speed cooling fan built-in to keep the unit cool.When installing the REVAMP8250, a helpful input overload LED indicator on the rear and amplifier clip indicator on the front will help ensure a fast and hassle-free installation.Key Features8-channels, bridgeableCombine with a pre-amplifier or matrix to create 8 zones in mono, 4 zones in stereo, 4 bridged mono or 2 bridged stereo systems8 x 250 Watts (RMS @ 4 Ohms)8 x 350 Watts (Dynamic @ 4 Ohms)In bridge mode 4 x 500 Watts ( RMS @8 Ohms)Intelligent variable speed cooling fan5-year warranty

REVAMP2250 is a professional 2-channel digital power amplifier with 2 x 350 watts output power @ 4 ohms, but is also bridgeable (1 x 700 watts @ 8 ohms). The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology. The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (6 presets). An example of a preset is the combination CH1 subwoofer and CH2 trafo load. In this example you have a low-pass filter for increased stability when using 100 volt transformers on the output, allowing you to use 100 volt speakers as top speakers combined with a standard low impedance subwoofer. With the other presets channels can be bridged, high pass filters can be applied to a channel... The very intuitive front display shows what is going on with one blink of an eye. Thanks to our own designed automatic protection system (patent pending) with smart use of a compressor/limiter topology we bring our switched mode power supply to an unexpected high level! This manifests itself in a great dynamic power with an unseen musicality and exceptional dynamic sound. Ease of use, high-tech, reliability and big output power has never been as cleverly combined as in this REVAMP2250 amplifier. 

Solid Dynacord amplifier technology at highly competitive prices.These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.The integrated, switchable Low-Pass Notch filter (a typical Dynacord special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Apart REVAMP 2600 is a professional 2-channel power amplifier with 2 x 600 watts output power @ 4 ohms. The digital signal processor inside operates with one simple push button at the back of the unit to select an operating mode (10 presets) what makes this amplifier the ideal multipurpose tool for applications where you need a lot of power in two different zones like fitness centres or stereo applications. The amplifier contains an intelligent variable speed cooling fan.The REVAMP2600 also temporally decreases the output power to a safe limit whenever a thermal overload occurs (indicated by a LED light on the front panel). The very intuitive front display shows what is going on with one blink of an eye. Thanks to our own designed automatic protection system (patent pending) with smart use of a compressor/limiter topology we bring our power supply to an unexpected high level! This manifests itself in a great dynamic power with an unseen musicality and exceptional dynamic sound.

Show PAX-120 ολοκληρωμένος ενισχυτής Class D ισχύος 120W / 100V. Στην μπροστινή όψη βρίσκονται, μία θύρα USB και SD card reader για αναπαραγωγή μουσικών αρχείων. Διαθέτει Bluetooth για ασύρματη σύνδεση με συσκευές ήχου και δέκτη FM. Στην πίσω πλευρά υπάρχουν 4 είσοδοι μικροφώνου (XLR) με επιλογή ανάμεσα σε mic / line με προτεραιότητα στην πρώτη είσοδο για αναγγελίες έκτακτης ανάγκης και μία AUX (RCA). Ο PAX-120 είναι ιδανικός για συστήματα αναγγελιών και background μουσικής σε χώρους όπως εμπορικά καταστήματα, bar, εστιατόρια κ.α. Μέγεθος Rack 1U. Διαστάσεις (MxBxY) 483 x 281 x 44mm – 4,9 κιλά

The CI-NAP 101 is an ultra-quiet mono power amplifier compatible with 70V/100V line array loudspeakers. Compact and rack-mountable for easy, discreet installation, it is ideal for powering subwoofers or integrated hi-fi speakers that require a lot of power, while offering exceptional audio quality. What's more, it can be combined with an audio-video processor for tailor-made and ultimate installations.The CI-NAP 101 In A Few Key PointsStereo RCA inputs and stereo RCA outputs for series connection. Two Euroblock outputs for easy parallel connections between speakers.High impedance 70V/100V line amplification with selectable high-pass filter. Level control.Input signal detection with automatic power-down after 20 minutes.Universal 100V to 240V mains power supply

The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.Same power, less energy usageThese multi-channel amplifiers are ENERGY STAR® compliant yet can be enabled or disabled with a standby switch on the back of the device, which enables or disables the 'Auto standby mode’.Silent passive coolingIn order to reach maximum installer and maintenance convenience all CEP series devices are fully passively cooled. This is an energy-efficient and silent solution for its cooling needs.Uncompromised sound experienceThe highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. Miniature switches at the back allow you to daisy link inputs from one channel to another by just a single press on the switch.Amplification for any applicationThese both low impedance as 70/100V amplifiers are designed to deliver high-quality amplification, distributed over multiple zones, like small offices, retail or a school environment.

The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.Same power, less energy usageThese multi-channel amplifiers are ENERGY STAR® compliant yet can be enabled or disabled with a standby switch on the back of the device, which enables or disables the 'Auto standby mode’.Silent passive coolingIn order to reach maximum installer and maintenance convenience all CEP series devices are fully passively cooled. This is an energy-efficient and silent solution for its cooling needs.Uncompromised sound experienceThe highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. Miniature switches at the back allow you to daisy link inputs from one channel to another by just a single press on the switch.Amplification for any applicationThese both low impedance as 70/100V amplifiers are designed to deliver high-quality amplification, distributed over multiple zones, like small offices, retail or a school environment.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by active cooling on the SCP224 and SCP230 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by active cooling on the SCP224 and SCP230 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by passive cooling on the SCP212 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

Οι AMP35E και AMP60E είναι επαγγελματικοί ενισχυτές με μίκτη 35W ή 60W με έξοδο σταθερής τάσης (70 / 100V) ή σταθερή αντίσταση (4 / 8Ω). Αυτή η σειρά ενισχυτών έχει σχεδιαστεί για να ικανοποιεί τις ανάγκες ενός μεγάλου εύρους εγκαταστάσεων commercial ήχου με τον πιο ευέλικτο και επαγγελματικό τρόπο. Η σειρά έχει σχεδιαστεί για να εγγυηθεί τη μέγιστη αξιοπιστία σε παρατεταμένη χρήση.Γενικά χαρακτηριστικά :• Κύκλωμα προστασίας υπερφόρτωσης και βραχυκυκλώματος ηχείων• Ένδειξη εκκίνησης LED• (Master) Main level control• Xωριστά level controls για είσοδο 1 , 2 και AUX• Ρύθμιση μπάσων και πρίμων• 2 είσοδοι MIC / MIC Phantom 48V / LINE balanced σε τερματικά Euroblock• 1 AUX Line RCA Input• MIC 1 Input με λειτουργία προτεραιότητας• 4 έξοδοι, δύο σε σταθερή αντίσταση (8 / 4Ω) και δύο σε σταθερή τάση (70 / 100V)Προδιαγραφές :Μοντέλο: AMP60EΙσχύς εξόδου RMS 60 WΕίσοδοι 2x MIC / PH / LINE (3,5 mm EUROBLOCK) 1x AUX (RCA L & R)Ευαισθησία εισόδου MIC: -50 dBv / 1 kΩ balanced PH: όπως παραπάνω με φανταστική τροφοδοσία 24V LINE: -10 dBv / 100 kΩ balanced AUX: -10 dBv / 47 kΩ unbalancedΧειριστήρια MASTER VOLUME CONTROL 1 TREBLE TONE CONTROL 1 BASS TONE CONTROL 2 MIC / LINE VOLUME CONTROLS 1 AUX VOLUME CONTROL 1 ΠΡΟΤΕΡΑΙΟΤΗΤΑ στο MIC / LINE 1Tone Controls Shelving +/- 10 dB @ 10 kHz Ράφια +/- 10 dB @ 100 HzΈξοδος ηχείων 100 / 70V / 8Ω / 4ΩBύσμα εξόδου 5,08 mm EUROBLOCKΑπόκριση συχνότητας 60Hz -20KHz (-3dB)Παραμόρφωση (THD)

The BAE100 Bluetooth antenna extender kit, allows increasement of reception range for a Bluetooth (2.4 GHz) receiver when installed to a 19" equipment rack or any other (shielded) enclosure. The kit includes a 7 dBi (279 mm) antenna with a higher gain and reception range compared to most standard antenna's. It consists of a special multifunctional mounting bracket that offers the possibility to mount to a single 19" rack space enclosure.Mounting of the antenna on front of a 19" device (e.g. preamplifier with Bluetooth functionality) can also be done with the included 1 meter connection cable (SMA Male - Female), while the included 5 meter cable allows placement outside of the enclosure (e.g. wall mounting). Connections are made by SMA type connectors.

The BMP42 receiver offers wireless connection possibilities for audio playback from any Bluetooth-compatible portable device including laptops, smartphones, tablets or any other. A long-range transmission distance (up to 30 meters) is possible depending on the installed environment.Device discovery and pairing protection with storage of up to 8 authorized devices shall prevent playback from unauthorized users in public areas. All media information such as track and artist information can be retrieved from the BMP42 (if supported by the connected device), while playback control is possible from the connected device or remote control.

The XMP44 is a professional modular audio system with 4 SourceCon™ interface card slots where to a wide variation of optional modules can be installed. The variety of available modules ranges from FM tuners to DAB&DAB+ tuners, internet radio tuners, voice file interfaces and many more. The flexible architecture allows any project combination up to four sources, resulting in a truly versatile solution that will live up the needs for any user taking high regard of crystal clear audio reproduction. Simultaneous operation for all four modules makes it a compact multi-source system which is the perfect expansion for any multi-zone audio system. The front panel of the system accommodates a 2.8” TFT display in combination with a push rotary function dial and 4 tactile pushbuttons. The controls and indicators on the front panel of the unit are guaranteeing an intuitive and user friendly operation, allowing hassle free operation and configuration to even unexperienced users. Four USB interfaces (one for each module) are enabling playback or storage of media and voice file, while pre-listening for each output is possible through a built-in PFL speaker with individual volume control. Both RS-232 and TCP/IP communication ports are implemented, allowing system integration with any home or industrial automation system. Using the freely available AUDAC Touch™ application for smart devices guarantees total system control and configuration from any device on any location and at any time. An optional Dante™ interface is available for the XMP44. The installation of this network interface allows receiving and sending of low latency, high quality audio over a standard Ethernet network. 

Meet the new XLS DriveCore™ 2 SeriesThe next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.Join the social conversation: #BeHeardXLS

Multi-channel power amplifier 6 channels - 3 in stereo (total power 480W @ 4 Ohms) 3 Zones2 Bus inputs 2 Bus outputs for connecting other A680 multi-channel amplifiers - Perfect flexibility for the audio input signals: Switch to select the common audio signal (Bus) or the individual stereo channel (line) of each zone 6 individual adjustments for the input voltage - Trigger mode / automatic mode / automatic standby mode Stereo / bridge mode (up to 3 x 150 W @ 8 Ohms)

The COM108 is a compact but versatile public address mixing amplifier which offers solutions for small to medium size audio systems in commercial installations. Typical application are background music systems in retail stores, bars, restaurants and office buildings. The compact and simple design allows installation in any location and operation through any possible user. The amplifier is designed using Class-D amplifier technology and delivers an output power of 80 Watt to constant voltage (100V and 70V) or low impedance (4 Ohm) audio systems. A switch mode power supply allows compatibility with a wide variation of mains voltages for global compatibility. A stereo line input allows connection for a wide variation of audio sources such as media players, radio tuners, internet audio players, ... and many more. A balanced mic / line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled, and compatibility with voice file players is guaranteed by the wide gain adjustment possibility (0 dB - +50 dB). The COM108 is a table-top standing device, while rack mounting in 10.5" or 19" equipment racks is possible using an optionally available mounting set (MBS310).

The COM104 is a compact but versatile public address mixing amplifier which offers solutions for small to medium size audio systems in commercial installations. Typical applications are background music systems in retail stores, bars, restaurants and office buildings. The compact and simple design allows installation in any location and operation through any possible user. The amplifier is designed using Class-D amplifier technology and delivers an output power of 40 Watt to constant voltage (100V and 70V) or low impedance (4 Ohm) audio systems. A switch mode power supply allows compatibility with a wide variation of mains voltages for global compatibility. A stereo line input allows connection for a wide variation of audio sources such as media players, radio tuners, internet audio players, ... and many more. A balanced mic/line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled, and compatibility with voice file players is guaranteed by the wide gain adjustment possibility (0 dB - +50 dB). The COM104 is a table-top standing device, while rack mounting in 10.5" or 19" equipment racks is possible using an optionally available mounting set (MBS310).

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost.  Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|300BL offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more.  Designed for ease-of-use in a variety of applications, the 4|300BL is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.  The 4|300BL also comes with BLU link, adding the ability to send and receive channels over HARMAN’s digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

Ολοκληρωμένος ενισχυτής 40W / 100V με ενσωματωμένο MP3 player με θύρα USB, σειρήνα που ενεργοποιείται με κουμπί από το μπροστινό πάνελ, 2 εισόδους μικροφώνων jack 6,3 mm (TRS) καθώς και 1 στερεοφωνική είσοδο Aux με RCA ή mini jack στo πίσω μέρος. Είναι κατάλληλος για συστήματα αναγγελιών και μετάδοσης background μουσικής. Η λειτουργία του με 12V DC τον κάνει κατάλληλο και για φορητή χρήση. Η έξοδος των ηχείων είναι 4 Ohm / 70V / 100V (Euroblock Connectors). Ο ενισχυτής διαθέτει και βάση για στήριξη σε επιφάνεια (γραφείο, έπιπλο, κλπ)

A powerful amplifier and mixer for your businessThe JBL VMA 2120 has plenty of power to fill your place of business with music, and it can smoothly lower the background volume when you need to page a customer or make an announcement. Eight input channels give you plenty of options for music sources, with two priority channels for microphone connections so paging and announcements can be heard loud and clear. It's even easy to operate when hidden away in a darkened cabinet, thanks to the illuminated rings around each output volume dial on the front panel. The mixer/amplifier is also compatible with JBL CSR-V in-wall volume controls (not included) via twin RJ-45 ports on the back panel. With two output channels of 120-watts each, stable from 4 to 8 ohms, you'll have all the flexibility you need to build the right system for your place of business.

Type : Multi-zones power amplifierChannel : 6 channel, 3 zonesPower output : 80 watts / ch @ 4 OhmsBridged power output : 150 watts / ch @ 8 OhmsTotal harmonic distorsion : 65 dB / 1 kHz 4 Ohms Zone-ZoneSignal to noise : > 90 dB (A weighted Ref : 19 V)Frequency range : 20 Hz - 20 kHz (+/- 3 dB)Trigger : 12V IN & OUTDamping Factor : > 55 (1 kHz)Input impedance : > 20 k OhmsVoltage input : AC 100 - 120 V 60 Hz / AC 220 - 240 V 50 Hz Auto SwitchingSafety : CE, CB, NRT, FCC, CE-EMC, ERPDimensions : W430 x H88* x D335 mmWeight : 9,5 kg* without feet

Επαγγελματικός 4-κάναλος τελικός ενισχυτής class B, ιδανικός για touring καθώς και για μόνιμες εγκαταστάσεις. Η σειρά VS αποτελείται από επαγγελματικούς τελικούς ενισχυτές, σχεδιασμένους να παράγουν τα καλύτερα δυνατά αποτελέσματα για ένα ευρύ φάσμα χρηστών. Χαρακτηριστικά: Κανάλια: 4 Output Power: 4 x 150W @ 8Ω, 4 x 250W @ 4Ω Bridge Mode: 2 x 300W @ 4Ω Ενδείξεις πρόσοψης: AC Power switch, Gain controls, Red clip leds, Green Signal Leds Οθόνη: LCD liquid crystal - ένδειξη θερμοκρασία λειτουργίας και volume level κάθε καναλιού Είσοδοι: (3-pin) XLR, TRS 1/4, RCA Έξοδοι: Speakon, Binding posts Απόκριση συχνότητας: 20Hz - 20kHz Rackmount: 19” 2U Διαστάσεις (cm): 483 x 310 x 88 Βάρος(kg): 17,50

Επαγγελματικός 2-κάναλος τελικός ενισχυτής class D, ιδανικός για touring καθώς και για μόνιμες εγκαταστάσεις. Η σειρά VS αποτελείται από επαγγελματικούς τελικούς ενισχυτές, σχεδιασμένους να παράγουν τα καλύτερα δυνατά αποτελέσματα για ένα ευρύ φάσμα χρηστών. Χαρακτηριστικά: Κανάλια: 2 Output Power: 2 x 350W @ 8Ω, 2 x 600W @ 4Ω, 2 x 800W @ 2Ω Bridge Mode: 750W @ 4Ω Ενδείξεις πρόσοψης: AC Power switch, Gain controls, Red clip leds, Green Signal Leds Οθόνη: LCD liquid crystal - ένδειξη θερμοκρασία λειτουργίας και volume level κάθε καναλιού Είσοδοι: (3-pin) XLR Έξοδοι: Speakon Απόκριση συχνότητας: 30Hz - 20kHz Rackmount: 19” 1U Διαστάσεις (cm): 483 x 225 x 44 Βάρος(kg): 4,14

Επαγγελματικός 2-κάναλος τελικός ενισχυτής class D, ιδανικός για touring καθώς και για μόνιμες εγκαταστάσεις. Η σειρά VS αποτελείται από επαγγελματικούς τελικούς ενισχυτές, σχεδιασμένους να παράγουν τα καλύτερα δυνατά αποτελέσματα για ένα ευρύ φάσμα χρηστών.  Χαρακτηριστικά: Κανάλια: 2 Output Power: 2 x 250W @ 8Ω, 2 x 450W @ 4Ω, 2 x 650W @ 2Ω Bridge Mode: 600W @ 4Ω Ενδείξεις πρόσοψης: AC Power switch, Gain controls, Red clip leds, Green Signal Leds Οθόνη: LCD liquid crystal - ένδειξη θερμοκρασία λειτουργίας και volume level κάθε καναλιού Είσοδοι: (3-pin) XLR Έξοδοι: Speakon Απόκριση συχνότητας: 30Hz - 20kHz Rackmount: 19” 1U Διαστάσεις (cm): 483 x 225 x 44 Βάρος(kg): 4,14

MX Series Professional Power Amplifiers provide the power and performance needed for installation and portable passive systems. Utilizing proven Mackie amplifier design history, they deliver clear, punchy sound that’s distortion-free even when pushed to the limits. With optimized performance, super-quiet operation and an array of protection circuits, the MX Series delivers powerful performance at an affordable price. Combine with DRM Passive Loudspeakers and the SP260 Loudspeaker Processor for a complete Mackie professional system. Features: 2700W PROFESSIONAL POWER AMPLIFIER Affordable, reliable power perfect for DRM Series Passive Loudspeakers, installations, and production audio systems Forced-air ventilation keeps the amplifier running cool Power output: 1000W Continuous power @ 8 ohms per channel 1350W Continuous power @ 4 ohms per channel 2700W continuous power @ 8 ohms bridged Selectable parallel/stereo/bridged operating modes Independent level control per channel Selectable input sensitivity Signal, Clip, and Fault LEDs per channel Short, under-impedance, over-current and thermal protection XLR input and Thru per channel NL4 outputs Robust, impact-resistant, all-steel 2U rackmount chassis

MX Series Professional Power Amplifiers provide the power and performance needed for installation and portable passive systems. Utilizing proven Mackie amplifier design history, they deliver clear, punchy sound that’s distortion-free even when pushed to the limits. With optimized performance, super-quiet operation and an array of protection circuits, the MX Series delivers powerful performance at an affordable price. Combine with DRM Passive Loudspeakers and the SP260 Loudspeaker Processor for a complete Mackie professional system. Features: 1500W PROFESSIONAL POWER AMPLIFIER Affordable, reliable power perfect for DRM Series Passive Loudspeakers, installations, and production audio systems Forced-air ventilation keeps the amplifier running cool Power output: 500W Continuous power @8 ohms per channel 750W Continuous power @4 ohms per channel 1500W continuous power @ 8 ohms bridged Selectable parallel/stereo/bridged operating modes Independent level control per channel Selectable input sensitivity Signal, Clip, and Fault LEDs per channel Short, under-impedance, over-current and thermal protection XLR input and Thru per channel NL4 outputs Robust, impact-resistant, all-steel 2U rackmount chassis

Specifications : New front panel design Heavy duty aerator Novel transistors Large, oversized cooling fins Overload protection and short-circuit protection High reliability Thermal protective circuit Separate amplifier circuits for channel A and B Bridged mono operation Ground/lift switch against background noises Aluminium cooling tunnel 360 watt pro final amplifier Frequency range: 20 Hz - 20 kHz Inputs: XLR, RCA Outputs: PA speaker cord pro, screw clamps Output rating: 2x 180 W at 4 ohm, 2x 120 W at 8 ohm Dimensions: 483 x 88 x 350 mm Weight: 8.5 kg

Dominance reloaded: The MK2 series of Reloop's Dominance amps combines intelligent electronics and qualitative manufacturing adding up to an amplifier solution for gastronomy, business and clubbing. A vast protective circuit package avoids unwanted overloading of any kind. With the three different capacity levels for 360, 720 and 960 watt every sound engineer should be able to find the right package. Specifications : Heavy duty aerator Novel transistors Large, oversized cooling fins Overload protection and short-circuit protection High reliability Thermal protective circuit Separate amplifier circuits for channel A and B Ground/lift switch against background noises Aluminium cooling tunnel Outputs: PA speaker cord pro, screw clamps Inputs: XLR, RCA 720 watt pro final amplifier Output rating: 2x 360 W at 4 ohm, 2x 240 W at 8 ohm frequency range: 20 Hz - 20 kHz Dimensions: 483 x 88 x 350 mm Weight: 10 kg

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom guaranteeing a clean, undistorted signal straight to your speakers. The XLS DriveCore 2 assures that you will be heard as you deliver a powerful, pure sound experience for any venue.Χαρακτηρτιστικά:Signal to Noise Ratio (dB): >103 dBTotal Harmonic Distortion (THD) (full rated power, 20Hz to 20kHz) 85 dB, >55 dBLoad Impedance: OhmPower Output W/8Ω: 375Power Output W/Brigde Mode/8Ω: 1300Voltage Gain (dB): 31 dBInput Sensitivity: 1.4Vrms (for full rated power at 4 ohms)Width (cm): 48.3

The PRE116 is a 6 channel stereo preamplifier containing a variety of input possibilities for microphone and line level audio signals, offering a possibility for a wide range of small to medium sized audio installations in various kinds of applications. It features two balanced mono inputs with phantom power and three band tone control allowing connection of microphones or line level signal sources. The switchable talkover function suppresses background music if a priority signal is present, making it suitable for paging or voice file announcements. The four stereo line level inputs are implemented as a balanced one fitted with XLR connectors and three unbalanced ones fitted with RCA connectors. Hereby, connection possibilities for a wide variety of line level sources is guaranteed. Additionally, an integrated Bluetooth receiver (mixed with Ch 3) and 3.5 mm jack connection on its front panel (mixed with Ch 4) are offering convenient wired or wireless connection possibilties for portable and handheld devices including laptops, smartphones and tablets. A priority mute contact suppresses all (nonpriority) music sources in case of contact closure, allowing to link autonomous alarm systems. Input volume control is done using the corresponding rotary dials on the front panel, while the output section features a 6-segment LED VU bar, a master volume control and 2-band tone control. Connections and input or output configurations such as gain adjustment and mono/stereo switching can be done through the provided controls on the back of the device.SYSTEM SPECIFICATIONSInputs Bluetooth receiver (mixed with Ch 3)Front 3.5mm Jack (mixed with Ch )Priority mute contactSignal / Noise > 90 dBTHD+N (@ 1 kHz) < 0.05%Crosstalk (@ 1 kHz) > 70 dBFrequency Response (± 3 dB) 20 Hz - 20 kHzPower Supply 100 ~ 240 V AC / 50 ~ 60 HzConsumption 12 WInputs Balanced Microphone Type 2 x Balanced MicrophoneBalanced Stereo Type 2 x Stereo Balanced LineUnbalanced Stereo Type 3 x Stereo Unbalanced LineOutputs Balanced Stereo Type 1 x Balanced Stereo outputsInputs Microphone Sensitivity (1W/1m) -6 dB ~ -50 dBLine Sensitivity (1W/1m) -20 dB ~ +4 dBBalanced Microphone Phantom Power 15 V DCOutputs EQ Treble 15 dB (2.5~20 kHz)Bass 15 dB (100 Hz)Inputs Balanced Microphone EQ High 15 dB (12.5 kHz)Mid 15 dB (2.5 kHz)Low 15 dB (80 Hz)PRODUCT FEATURESDimensions 482 x 44 x 335 mm (W x H x D)Weight 4,10 kgUnit height 1 HE

The MTX48 is the four-zone version of the MTX series, containing two balanced microphone inputs with priority function, phantom power possibility and three-band tone control. Four stereo line-level inputs are provided to which any line-level music source such as a CD-player, tuner or MP3 player can be connected. The other two inputs of the matrix are the additional wall panel inputs for both line and microphone signals. The MTX can be controlled by means of additional control panels, its fully functional web based interface or the AUDAC Touch app. Using the freely available AUDAC Touch™ application for smart devices guarantees total system control and configuration from any device on any location and at any time. The RS232 port makes the MTX compatible with any home & industrial automation systems supporting RS232. The front panel of the MTX shows a rotary button per zone with indication LEDs for accessing controls and settings. A built-in PFL loudspeaker makes it possible to pre-listen every channel without the need for a headphone. The balanced line-level zone output connections are performed using 3-pin Euro-terminal block connectors, each of them accompanied with an RJ45 connector for connecting additional wall panels for that zone. A 24 volts’ power connection makes it possible to keep the MTX running on emergency power, even if the main power is shut down. Download the AUDAC system manager software here.Get the AUDAC Touch™ app.SYSTEM SPECIFICATIONSCrosstalk (@ 1 kHz) -85 dBControl Front panelRS-232TCP/IP (RJ45)Wall panel (RS-485)Audac Touch™Web (HTML5)Web (Flash)Outputs Impedance 51 ΩLevel -70 dB ~ 0 dBFrequency Response (± 3 dB) 20 Hz - 20 kHzPower Consumption 12 WSupply 100 ~ 240 V AC / 50 ~ 60 Hz24 V DC (emergency Power)Inputs Balanced Microphone Type 2 x Balanced MicrophoneConnector XLRSensitivity (1W/1m) 0 dBV ~ 50 dBVPhantom Power 15 V DCSignal / Noise > 80 dBTHD+N (@ 1 kHz) < 0.05 dBUnbalanced Stereo Type 4 x Stereo Unbalanced LineConnector RCASensitivity (1W/1m) -14 dB ~ +9 dBSignal / Noise > 100 dBTHD+N (@ 1 kHz) < 0.01 dBWall Panel Type 4 x Wall panel inputConnector RJ45Other Type Priority mute contactOutputs Balanced Stereo Type 3-pin Euro Terminal Block (Pitch - 3.81 mm)EQ Treble ± 14 dB (2.5~20 kHz)Bass ± 14 dB (100 Hz)Inputs Balanced Microphone EQ High ± 15 dB (12.5 kHz)Mid ± 15 dB (2.5 kHz)Low ± 15 dB (80 Hz)PRODUCT FEATURESDimensions 482 x 88 x 335 mm (W x H x D)Weight 4.750 kgUnit height 2 HE

The CAP series are professional 100V multi-channel power amplifiers. The CAP224 offers two channels and has an output power of 240 Watt. This way, a flexible solution is created for multi-zone audio distribution systems with two independent zones. They are designed as no-nonsense amplifiers with only the necessary controls and connections which creates great simplicity in use and installation. A high efficiency and reliability of the device is achieved by using switching power supplies in combination with Class-D amplifier technology. A temperature controlled fan constantly keeps all parts within the right operation range while avoiding excessive buzz.A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload and limits the signal when necessary. The input connections are performed using balanced XLR connectors and link output connectors are provided for link through to other amplifiers. Besides, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided for each channel. The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.Specifications: RMS Power: 2 x 240 WOutput Voltage / Impedance: 100 V (42 Ohm)THD+N: 100 dBPower Supply: 230 - 240V AC / 50 HzDimensions (W x H x D): 482 x 88 x 420 mmWeight: 7.2 kg 

The CAP Series are professional 100V multi-channel power amplifiers, containing various models with different channels and different output power configuration. The CAP424 is a four channel version with an output power 240 Watt. This way, a flexible solution is created for multi-zone audio distribution systems with four zones. They are designed as no-nonsense amplifiers with only the necessary controls and connections which creates great simplicity in use and installation. A high efficiency and reliability of the devices is achieved by using switching power supplies in combination with Class-D amplifier technology. A temperature controlled FAN constantly keeps all parts within the right operation range, while avoiding excessive buzz. A built-in multipurpose protection circuit protects against DC malfunction, Short circuit, overheating, overload and limits the signal when necessary. The input connections are performed using balanced XLR connectors and Link output connectors are provided for link through to other amplifiers. Besides, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided for each channel. The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.Specifications: RMS Power: 4 x 240 WOutput Voltage / Impedance: 100V (42 Ohm)THD+N: 100 dBPower Supply: 230 - 240V AC / 50 HzDimensions: 482 x 88 x 420 mmWeight: 8.35 kg 

L1800FD-DSP Power Amplifier 2X950WFeatures:Live performance DSP amplifierFully integrated professional speaker processing with fir drive technologyMarket leading acoustic performance and rock solid reliabilityTrue 2 ohm stabilityIntuitive system control software, makes setup and control easySpecifications:DIM 30:

L1300FD-DSP Power Amplifier 2X650WFeatures:Live performance DSP amplifierFully integrated professional speaker processing with fir drive technologyMarket leading acoustic performance and rock solid reliabilityTrue 2 ohm stabilityIntuitive system control software, makes setup and control easySpecifications:​DIM 30:

L3600FD-DSP Power Amplifier 2X1400WFeatures:Live performance dsp amplifierFully integrated professional speaker processing with fir drive technologyMarket leading acoustic performance and rock solid reliabilityTrue 2 ohm stabilityIntuitive system control software, makes setup and control easySpecifications:DIM 30:

L3600FD-DSP Power Amplifier 2X1800WFeatures:Live performance dsp amplifierFully integrated professional speaker processing with fir drive technologyMarket leading acoustic performance and rock solid reliabilityTrue 2 ohm stabilityIntuitive system control software, makes setup and control easySpecifications:DIM 30:

The SPA Series amplifiers from QSC are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications. Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.Features:Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loadsENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so they reduce operational costs.Bridgeable outputs for higher power — Bridging the outputs of the SPA2-60 and SPA4-60 provide up to 200 watts into low impedance, and up to 250 watts into 70V or 100V providing outstanding flexibility.Auto-Ramp provides quiet startup and power-down — The EnergyStar Auto-Ramp circuitry ensures quiet and fast power up from Standby and seamless power-down following 28 minutes of inactivity, dramatically reducing power consumption.Rack-mountable 1U, half rack width enclosure — The SPA2-60 and SPA4-60 can be mounted in 1/2 RU reducing rack space requirements. In addition their clever joining brackets enable easy under-table and wall-mounting.Specifications:4 channel mode, watts per channel8Ω dynamic, both channels driven: 60 watts4Ω dynamic, both channels driven: 60 watts  Bridged Mode, watts per channel  : 8Ω & 4Ω dynamic: 200 watts70V & 100V: 250 wattsSignal to Noise (A weighted, 20 Hz–20 kHz): >100 dBInput Sensitivity: 1.23 Vrms (+4 dBu)Maximum Voltage Gain: 25.0 dBFrequency Response (20 Hz - 20 kHz): +0.1 dB, -0.1 dBMaximum Input Level: +12.3V (+24 dBu)Front Panel Indicators: Power, per channel Signal, per channel Protect/LimitHighpass Filter: Switchable 80 Hz when Bridged in 70V & 100VControls: 4Ω/8Ω/70V Bridge Highpass On/100V Bridged Highpass On per channel pairDimensions (HWD):: 43 x 220 x 241 mm (1RU)Weight: 1,6 kg 

The SPA Series amplifiers from QSC are two half rack 1U, convection cooled power amplifiers delivering two or four channels of 60 watts per channel into 4Ω and 8Ω. These amps can also be bridged to supply 200 watts into 4Ω and 8Ω, and up to 250 watts into 70V or 100V loads making them extremely flexible for Low-Z or High-Z applications.Utilizing an advanced Class-D amplifier design and Universal Power Supply the SPA Series are amazingly efficient allowing them to be convection cooled and are ENERGY STAR® qualified with quiet auto-ramp standby functionality. The SPA2-60 and SPA4-60 are housed in an unobtrusive black painted 1/2 RU chassis with unique mounting hardware enabling rack, table and wall mounting capabilities.Features:Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loadsENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so they reduce operational costs.Bridgeable outputs for higher power — Bridging the outputs of the SPA2-60 and SPA4-60 provide up to 200 watts into low impedance and up to 250 watts into 70V or 100V providing outstanding flexibility.Auto-Ramp provides quiet start-up and power-down — The EnergyStar Auto-Ramp circuitry ensures quiet and fast power up from Standby and seamless power-down following 28 minutes of inactivity, dramatically reducing power consumption.Rack-mountable 1U, half rack width enclosure — The SPA2-60 and SPA4-60 can be mounted in 1/2 RU reducing rack space requirements. In addition, their clever joining brackets enable easy under-table and wall-mounting.Specifications:8Ω dynamic, both channels driven: 60 watts4Ω dynamic, both channels driven: 60 watts Bridged Mode, watts per channel      8Ω & 4Ω dynamic: 200 watts70V & 100V: 250 wattsSignal to Noise: (A weighted, 20 Hz–20 kHz): >100 dBInput Sensitivity: 1.23 Vrms (+4 dBu)Maximum Voltage Gain: 25.0 dBFrequency Response (20 Hz - 20 kHz): +0.1 dB, -0.1 dBMaximum Input Level: +12.3V (+24 dBu)Front Panel Indicators: Power, per channel Signal, per channel Protect/LimitHighpass Filter: Switchable 80 Hz when Bridged in 70V & 100VControls    4Ω/8Ω/70V Bridge Highpass On/100V Bridged Highpass On per channel pairDimensions (HWD):     43 x 220 x 241 mm (1RU)Weight: 1,1 kg​

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 2 x 250WRMS power @ 8 Ohm Stereo: 2 x 130WRMS power @ 8 Ohm Bridge: 500WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 100-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR input & signal linkthroughConnectors - output: Speakon compatible & 2-pin terminal block (5.08 mm)Power consumption: 224 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.4 Kg

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 2 x 500WRMS power @ 8 Ohm Stereo: 2 x 250WRMS power @ 8 Ohm Bridge: 1000WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1% Crosstalk > 70 dBCrosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 230-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR input & signal linkthroughConnectors - output: Speakon compatible & 2-pin terminal block (5.08 mm)Operating Temperature: 0° ~ 40° C at 95% humidityPower consumption: 426 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.7 kg

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. The quad channel construction consists of four channels with the possibility to use two independent stereos. In combination with the integrated active crossover network, it offers a complete solution for compact stereo applications with a bass cabinet. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload.Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectors.Specifications:RMS power @ 4 Ohm Stereo: 4 x 250WRMS power @ 8 Ohm Stereo: 4 x 130WRMS power @ 8 Ohm Bridge: 2 x 500WFrequency Response: 20 Hz - 20 kHzSignal / Noise: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 230-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR inputConnectors - output: 2-pin terminal block (5.08 mm)Power consumption: 438 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mmWeight: 4.7 kg

This energy efficient stereo amplifier will automatically switch to a standby mode when no audio signals are detected (less than 1Watt power consumption in standby mode).Their weight and compact size makes these single rack space amplifiers ideal for both fixed and mobile installations. Their use of Class-D technology ensures excellent efficiency as well as outstanding sound quality. Thanks to the complete passively cooled entity only a minimal of maintenance is needed, while ensuring maximum reliability. The quad channel construction consists of four channels with the possibility to use two independent stereos. In combination with the integrated active crossover network, it offers a complete solution for compact stereo applications with a bass cabinet. Various specific functions and advanced circuitry guarantees an optimal protection against DC malfunctioning, short circuit, overheating and overload. Signal input connections are integrated with balanced XLR connectors, and signal link through is possible using the XLR output connectors. Outputs are connected using terminal block connectorsSpecifications:RMS power @ 4 Ohm Stereo: 4 x 100WRMS power @ 8 Ohm Stereo: 4 x 50WRMS power @ 8 Ohm Bridge: 2 x 200WFrequency Response: 20 Hz - 20 kHzSignal to Noise ratio: > 90 dBTHD+N by 1 kHz (1/2 Rated Power): < 0.1%Crosstalk: > 70 dBTechnology: Class - DPower supply: Switching modePower supply range: 100-240V AC - 50/60 HzInput Sensitivity: 0 dB (1V RMS)Input Impedance: 12 k Ohm balancedProtection: DC Short-circuit, Over heating, Over load, Signal limitingCooling system: Convection cooledOperation temperature: 0° ~ 40° at 95% humidityConnectors - input: XLR inputConnectors - output: 2-pin terminal block (5.08 mm)Power consumption: 188 Watt (1/3 MOP at 1 kHz)Dimensions: 482 x 44 x 330 mm