Microphone Cables

Καλώδιο μικροφώνου 5m Mogami 2534 τερματισμένο με επίχρυσους connectors της Neutrik, από την ίδια την Mogami στην Ιαπωνία.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Grimm Audio TPR ‘Twisted Pair Reference’ cables are developed with physics in mind. Their design focuses on high RF immunity and low microphonics. The perfect symmetry of the cross-section and heavy shielding contribute to high RF immunity. Low microphonics is provided by a special interface layer under the shield and other construction details.

XLR male - to - XLR female -  10 meter

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Pro Series - Studio & Live XLR Female to TRS Male 6' (1.8 meters)

Pro Series - Studio & Live XLR Female to TRS Male 3' (0.9 meters)

Pro Series - Studio & Live XLR Cable 50' (15.2 meters)

Pro Series - Studio & Live XLR Cable 25' (7.6 meters)

Pro Series - Studio & Live XLR Cable 20' (6.1 meters)

Pro Series - Studio & Live XLR Cable 15' (4.6 meters)

Pro Series - Studio & Live XLR Cable 10' (3.0 meters)

Pro Series - Studio & Live XLR Cable 6' (1.8 meters)

Pro Series - Studio & Live XLR Cable 3' (0.9 meters)

Microphone cable XLR-XLR, Neutrik, length 1 meter  

Microphone cable XLR-XLR, Neutrik, length 1 meter  

Top notch 3m.  balanced Mic/Line cable Mogami MOD. 2549-00, with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 11 pF/m (much lower than the vast majority of single channel microphone - line cables), while the capacitance value between each signal conductor and shield lies at 76 pF/m. The connectors used are Neutrik gold plated.

Top notch 5m.  balanced Mic/Line cable Mogami MOD. 2549-00, with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 11 pF/m (much lower than the vast majority of single channel microphone - line cables), while the capacitance value between each signal conductor and shield lies at 76 pF/m. The connectors used are Neutrik gold plated.

Top notch 1m.  balanced Mic/Line cable Mogami MOD. 2549-00, with excellent shielding combined with very low capacitance values.The capacitance value between Hot and Cold conductors is 11 pF/m (much lower than the vast majority of single channel microphone - line cables), while the capacitance value between each signal conductor and shield lies at 76 pF/m. The connectors used are Neutrik gold plated.

Microphone cable XLR-XLR, length 0.5 meters 

Microphone cable XLR-XLR, Neutrik, length 1 meter  

Microphone cable XLR-XLR, length 10 meters  

Microphone cable XLR-XLR, length 15 meters  

Microphone cable XLR-XLR, length 20 meters  

Microphone cable XLR-XLR, length 5 meters  

Microphone cable XLR-XLR, length 3 meters  

Microphone cable XLR-5 M -> XLR-3F with 3P Female XLR -> 3P Male XLR PROEL metal housing connectors, 3 metres.

Cable Jack Stereo Male 6.3mm - XLR Female to Neutrik connectors and Cordial CMX222 cable 5m dimension.

Cable XLR M - XLR F with Neutrik connectors and cable Cordial CMFLEX 222 with dimension 5m.

Cable XLR M - XLR F with Neutrik connectors and cable Cordial upholstered with dimension 5m.

Cable XLR M - XLR F with Neutrik connectors and cable Cordial CMFLEX 222 with dimension 3m.

Microphone cable XLR-3 M -> XLR-3F with 3P Female XLR -> 3P Male XLR PROEL metal housing connectors, 3 metres.

Μicrophone Cable 1XLR3M->1XLR3F 10m.

Cable 1XLR3M->1XLR3F 1m.

Μicrophone Cable 1XLR3M->1XLR3F 3m.

Μicrophone Cable 1XLR3M->1XLR3F 2m.

Μicrophone Cable 1XLR3M->1XLR3F 5m.

PROEL CHL 250 10m

PROEL CHL 250 5m

PROEL CHL 250 3m

Proel CHL 250 LU10, 10 meters, Professional microphone cable, 3P Female XLR Neutrik -> 3P Male XLR Neutrik (China) connectors with black metal housing and golden pins, Connectors : NEUTRIK Cable : AWG24 Professional flexible microphone cable with spiral red copper shield Colours Available : Black

XLR Male - to - XLR Female - 3 meter

XLR male - to - XLR female -  5 meter