Microphone Shockmounts

SHM 12 is elastic suspending sock-proof brackets, which can reduce mechanical noise by more than 20dB.It is:light,solideasy to install,it also features a wide application range. 

The all new Sling-Shock is a revolutionary departure from traditional shock mount designs. We've done away with the rubberized parts and elastic cords, producing a durable shock mount that gives superior isolation from vibrations. In the Royer tradition, the Sling-Shock is hand-built in our Burbank, CA facility using only the finest materials.Our proprietary system of non-resonant nylon cable and damped steel springs acts to isolate the microphone from vibrations induced from the microphone stand. These vibrations can appear as rumble and/or low-grade noises which create disturbances across the bandwidth, from low end thumps to harmonic disturbances at different frequencies. The Sling-Shock's superior vibration-reduction capabilities and lack of self-resonance allow engineers to capture performances free of vibration-related interference across the bandwidth.The Sling-Shock RSM-SS1 is sized to fit Royer's 1-inch diameter R-121, R-122, R-122V, SF-1 and SF-12 ribbon microphones. Any cylindrical microphone measuring approximately one inch in diameter (+/- 1/8 inch) will work with the model RSM-SS1. Specifications:Superior isolation from vibration and shocksFelt-lined, scratch-free microphone chamber holds mic securelyNo rubberized parts to degrade or stretchFlexible for easy microphone positioningLifetime warranty

Audio Technica  AT8415Attenuates noise, shock and vibration transmitted through mic stands, booms and mountsLightweight, low-profile design is ideal for "fishpole" booms and video useAccepts cylindrical and tapered microphonesFeatures a constant-tension clutch and 360° rotationCompatible with 3/8"-16 and 5/8"-27 threaded stands

Audio Technica AT8449.Attenuates noise, shock and vibration transmitted through mic stands, booms and mountsCompatible with 3/8"-16 and 5/8"-27 threaded standsDesigned to be used with the following Audio-Technica models: AT4033, AT4040, and AT4050

Audio Technica  AT8458.Attenuates noise, shock and vibration transmitted through mic stands, booms and mountsCompatible with 3/8"-16 and 5/8"-27 threaded standsDesigned to be used with the following Audio-Technica models: AT2020, AT2020 USB, AT2035, AT2050, AT3035, AT3060

Audio Technica  AT8410a.Attenuates noise, shock and vibration transmitted through mic stands, booms and mountsSpring-clip fits most tapered and cylindrical microphonesPermits easy microphone insertion and removal without detaching mic cableCompatible with 5/8"-27 threaded stands

AKG H85 - flexible microphone holder for 19-26mm diameter microphones. Fits C2000B, C3000B, C4000B, Blue Line and ULS  Series. 

Here's a shockmount for your Sennheiser MK 4 cardioid condenser microphone. Custom crafted and made to match your MK 4, the Sennheiser MK 4 Shockmount decouples your mic and keeps vibrations from ruining your takes.

Shock mount for MKH20-MKH70 range. 3/8',5/8' and 1/2' thread insert. 

Suspension with pistol grip for use with MKH 20, MKH 70 and MKH 416 

Shock Stopper isolation mount/swivel adapter, reduces transmission of mechanical noise and vibration by more than 20 decibels. Compatible with Shure models 849, SM81, SM94, VP64, KSM137, KSM141, or any 3/4 inch (1.875 cm) microphone.

Isolation Mount for Shure VP88 MicThe Shure Model A88SM Microphone Isolation Mount is designed especially for use where exceptional freedom from mechanically transmitted noise is a necessity. Through its use of Shure's highly effective Shock-Stopper half-mount isolators and secure cable locking design, the A88SM eliminates most noise associated with stands, booms, and cable movement. Designed expressly for Shure's VP88 MS Stereo Condenser Microphone, the A88SM can also be used with any microphone with a handle diameter of approximately 27 mm (1-1/16").The A88SM offers several features that make it a versatile accessory for studio and location miking. As supplied, the mount contains a locking "foot"-type slide-in mount for instant attachment to most ENG cameras with a mounting "shoe." A simple twist knob - which also provides positive-locking vertical angle adjustment - permits removal of the foot and attachment of a swivel with both 5/8"-27 and 3/8"-16 tapped threads for attachment to most microphone stands and booms.

Shock mount for SM89 shotgun microphone, or any microphone with a 3/4-inch diameter handle. Reduces mechanical noise transmission by more than 20 decibels.

Shock mount with pop filter for Procaster, K2, NT-1A, NT-2A, Podcaster, NTK, NT1000 & NT2000 

The Shure A55M Shock Mount Microphone Clip reduces transmission of mechanical noise and vibration by more than 20 decibels. Securely attaches Shure models SM57, SM58, SM86, Beta57A, Beta58A, Beta87A, Beta87C, and KSM109 to standard microphone stands.

Neumann EA 87 shockmount for U87 - weight: 500g. Colour: Nickel.

Shure's innovative A56D Microphone Drum Mount sets a new standard for versatility. Compact in design, the A56D can be used in a multitude of positions for accurate microphone placement. Live, or in the studio, this universal clamp can be mounted virtually anywhere, including drum rims and racks, microphone stands, and cymbal stands. This reduces the stage clutter that is associated with traditional mic stand set-ups, while promoting greater placement accuracy.

Shockmount  for Rode microphones ΝΤ-2Α, ΝΤ-1000, ΝΤ-2000, ΝΤΚ, Κ2, Classic II.

The perfect suspension shock mount for the Procaster or Podcaster, the PSM-1 removes the ability for external vibrations to manipulate the microphones positioning.The PSM-1 gives you a sense of confidence when using your microphone in environments where there is a lot of movement that may interfere with the microphones performance.  

This microphone shockmount is designed to absorb vibrations from the floor and air, allowing a cleaner reproduction of sound. Suits medium diameter condenser microphones (often long / pencil style) with a diameter between 19 mm and 54mm. Attaches to any regular Mic Stand,Features:Studio quality shockmountHigh performance ABS plasticUniversal design, suitable for most mic modelsFits all standard microphone stands and booms 

Shockmount is designed to absorb vibrations from the floor and air, allowing a cleaner reproduction of sound. Suits large condenser microphones. The shockmount screws onto any regular mic stand and boom.