Αναζήτηση

Προενισχυτής phono ΜΜΠροδιαγραφές:Input 3,4 mV/47 KOhmOutput 300 mV/1 KOhm. Frequency responce: 20 Hz-20 KHz +-0,5 dB.. S/N Ratio>85 dBWeight: 0,3kg

Προενισχυτής phono ΜΜ με θύρα usb για να αποθηκεύσετε τα βινύλια σας σε mp3.

Tonar plastipap antistatic record inner sleeves (25 pieces) are made of super antistatic plastic paper reinforcement inside the plastic. This combination gives you both a dust free anti-static protection for your valuable records as well as additional strenght to avoid folding and creasing of the sleeves when sliding the sleeve in and out of the record album. This model 5311 plastipap is suitable for LP records only (12 inch-30 cm). Tonar plastipap inner sleeves are also available for 45, and 78 RPM records.

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

The carbon fiber anti-static brush from Thorens, for quick efficient cleaning and antistatic treatment of your vinyl treasures. A million senior carbon fibers, which are distributed on two rows satisfy this task perfectly.

Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity.The stiffness is important to be a super rigid base for the tonearm/cartridge and bearing/platter as there must be 100 % no moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter / bearing is directed in the TPE columns. On opposite the TPE avoid that any unwanted energie of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge.The bearing is an oversized inverted with a inert, resonance free ceramic ball on top Around the bearing we set a super heavy 700g mass point which sucks up all energy arround.The stiff carbon subchassis helps to transport all vibration in this mass point.So vibrations are transferred in heat The platter intself is from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energie.The belt is made from special anti-static rubber. It&#39;s glued and then polished.The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50%The tube is again out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of more tighter mounting of Highend MC cartridges.An external DC powersupply unit with an AC Generator creates new total clean power for the motors . For sure you have also 33 /45 electronic switching.A HIGHEND solution as the whole table. Technical Specifications:Nominal speed: 33/45 rpm, driven by microprocessor, separate control panel, lighted control buttonsSpeed Variance: 33 rpm: ± < 0,08%, 45 rpm: ± < 0,09%Signal to noise: S/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -70 dBDownforce range: 0 – 30 mNSupplied counterweights: without additional insert → for cartridge 5 – 9g (125g), with additional insert → for cartridge 8,5 – 13g (142g)Effective tonearm mass: 16.5 gEffective tonearm lenght: 254 mmOverhang: 16 mmPower consumption: 8,5 W max / 0,5 W stanbyVoltage: Universal swith mode power supply 15 V DC / 1,6 A, 90-264 V AC, 47 – 63HzDimensions (W × H × D): 500 × 400 × 115mm without connectors, 500 × 435 × 115mm with connectors in the rear panelWeight (without box): 13,5 kg + 0,5 kg Separated control panel

EAT&#39;s E-Flat is a new, forward-thinking turntable supplied with a revolutionary flat tonearm. Although flat arms have been seen in the past, none have been able to offer the rigidity necessary to deliver the stable performance expected of modern tonearms. Thanks to the continued evolution of carbon fibre, Forte has been able to create an arm with the practical and aesthetic benefits of a flat form, but without the weaknesses.E-Flat&#39;s mission is to bring to the music lover the highest quality performance, but in a user-friendly design. Ultra-flat, ultra-light and ultra-rigid, the E-Flat tonearm measures 10in long. A unipivot bearing supports the E-Flat, its fully (and easily) adjustable counterweight decoupled by energy- and vibration-absorbing Sorbothane. The E-Flat&#39;s unipivot system is extremely precise and accurately balanced, thanks to components endowed with especially hard metal surfaces. Unwanted motion often attributed to lesser unipivot designs is eliminated by the high mass of unipivot housing and the added security of two metal guides.A further valuable benefit is that its carbon-fibre arm "tube" can be changed by the user to address to specific cartridge requirements, with either lighter or heavier tubes to establish different arm/cartridge resonant frequencies. Adjustable anti-skating and a damped cueing lever are also fitted.A flat arm tube opens up a number of possibilities for the designer – and the listener. Its shape encourages the design of a flatter platter with easier, visible arm levelling, and there is no taper to accommodate. With perfect integration to the unipivot design pillar, no hollow tube to suffer the inevitable echo effects or ringing, greater stiffness, a new and superior hanging counterweight design with very high damping properties, the E-Flat tonearm&#39;s performance is truly quiet and incredibly "fast."This handsome and innovative arm is fitted to a turntable that adheres to the basic principles established by the existing models in the Forte family. A belt-drive design, it features two motors, like its &#39;bigger sisters&#39;. The two motors do not run in parallel, but act like a virtual 24-pole motor. The belt encircles an inner sub-platter, which is fitted with inside bearing made out of bronze bushings. The main platter rests on an inverted bearing and a ceramic ball, with a Teflon lining on the underside of the main platter.As with the larger Forte record decks, the diameter of the platter is oversized compared to those on most competitors&#39; turntables. 33cm was chosen because the moving mass is twice that of a standard 30cm platter. Forte fits a vinyl mat made of recycled LP records to create a surface with properties sympathetic to the LPs it supports. The platter is filled underneath with Sorbothane to stop resonance, while Sorbothane is also used to damp the bearing housing, tonearm base and magnetic feet. In addition to the isolation provided by the magnetic feet, the bearing assembly and platter aperture are suspended. Also in common with the dearer Forte turntables, the Forte E-Flat exhibits an ideal balance between mass-loading and thoughtful subchassis design. Technical Specifications:Dimensions: (WxHxD) 500x400x145mmTurntable weight: 18,7kgPlatter weight: 6,9kgPlatter diameter: 340mmWow and Flutter: +-0,01Tonearm: Flat, CarbonEffective length: 254mm, 10 InchMounting distance: 238mmOverhang: 16mmEffective mass: 4mm 19.5gEffective mass: 3mm 12.5g

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

Fits all brands and types of turntables and places your 7“ vinyls exactly centrally on the turntable. Adapt it is made from nonmagnetic metal, that makes it look first-class. Unlike cheap plastic solutions, Adapt it is unbreakable and doesn‘t gets lost easily! Specifications: Adaptor for use with 7-inch single records   Locates record centrally on turntable   No plastic - precision CNC-machined   Non-magnetic aluminium   Suitable for all brands and types of record players   2 colour options: black or blue  

Fits all Pro-Ject tonearms and allows qualified personnel to optimise bearing adjustment,when bearings are misadjusted, because of unassured transport of a turntable. If you are not sure about correct adjustment, please contact your local dealer!  CAUTION: Misuse of this adjustment tool may damage tonearm bearings! Specifications: Suitable for all Pro-Ject tonearms   Allows fine adjustment of bearings, if misadjusted   Caution: for qualified personnel only   Includes 2 inserts for different bearings   Full metal (aluminium & brass)  

Control of turntable speed.

Vinyl sound can be significantly improved, when unwanted resonances between record and platter can be reduced, while playback. Therefore surfaces of record and platter should connect tigthly.  Standard record pucks, that use weight to achieve this, have 2 disadvantages:  1) The weight can induce higher levels of rumble, when used with lower cost turntables which have less massive main bearings  2) Instead of tightening the records surface to the platter, heavy weight record pucks can cause the opposite: Vinyl will get shaped like a bowl with no contact of the outer edges of the record to the platter.  Clamp it is the real solution, an accessory with a clamp mechanism around the center spindle, that will not add weight, which would induce rumble. You can fine-adjust pressure according condition of your warped records. Fitting of Clamp it is easily done within seconds. This accessory will not only please your ears, its beautifully machined diamond-cut edges will also look extremely cool on any turntable!  Specifications: Sound improvement for all turntables   Reduces unwanted resonances while playback   Fast and easy mounting  • Fine-adjustment of thightening force   Full metal accessory with leather coating   Diamond cut finish  

With a machined armboard, dedicated external power supply, Linn tonearm, and a moving coil cartridge, this turntable delivers stunning performance and musicality at a price level between Klimax and Majik.The complete Akurate LP12 turntable comprises:Sondek LP12 turntableKore sub-chassis and armboardLingo power supply and motor control unit for the AC motorAkito tonearmKlyde moving coil cartridgeThe Akurate LP12 is available with a choice of solid wood plinths: Black Ash, Cherry, Oak, Rosenut and Walnut. Linn Akurate LP12 Turntable SpecificationsSpeed Accuracy: 0.03%Platter Tolerance: 1/1,000th inchDimensions (WxHxD): 5.5 x 17.5 inches x 14 inchesWeight: 22 lbs

NAD C 556 Transcription Turntable/Cartridge ComboVinyl Rules!Many of the world’s most ardent music lovers believe that the 33 1/3 RPM Long Playing vinyl record remains the most musically communicative playback medium. NAD has a long history of producing some of the best value-for-money turntables and phono stages. The PP 2i is a legendary budget phono preamp, while the PP 3i takes the superb performance of the PP 2i and adds a simple way to convert your LPs into CDs using your computer and the internet to automate the ‘CD mastering’ process.While vinyl LPs can be a reference quality source of musical enjoyment, they can also sound terrible if the turntable is less than reference quality. Unlike digital sources with their foolproof error correction circuits, the turntable is like a live performance with no room for error. The same piece of vinyl can sound lush, vibrant and spacious on one turntable, but edgy, lifeless and riddled with ticks and pops on another. The difference is the mechanical precision of every aspect of the turntable.Why Does It Sound So Good?When it comes to the C 556, NAD has spent lavishly on the parts of the turntable that define its performance, and has left off the features that do nothing to improve the sound. The result is a turntable that easily outperforms others at twice the modest asking price of the C 556. The secret to a good sounding turntable is to make a rock solid mechanical connection between the platter and the pickup stylus.Any play or vibration will either add resonant colouration (making the smack of a snare drum sound like a thud) or subtract the fine detail that is the primary benefit of well-played vinyl. To achieve this goal we use special materials and techniques. The three mechanisms that make up a turntable are the platter that supports and spins the record; the tone arm, which allows the stylus to accurately track the record; and the cartridge, which transforms the vibrations in the record groove into the electrical signals that are sent to your preamplifier.The platter of the C 556 uses a special phenolic resin that is pressure cast to create the ideal properties of being both massive and inert. The mass creates a flywheel effect that eliminates small, and very unmusical, speed variations called wow and flutter. The mass also rejects unwanted external vibrations, and combined with the extreme hardness of the phenolic material, suppresses vibrations in the audible range. This massive platter requires a precision low friction bearing to allow smooth and stable revolving motion.A special bronze body with a stainless steel ball bearing provides a point-perfect contact with the hardened steel shaft of the platter assembly. This is the ideal design for minimal friction, and a complete elimination of any play or ‘wobble’. The bearing is firmly connected to the rigid and well-damped base that provides a rigid connection to the tone arm. A precision synchronous clock motor keeps the platter spinning at exactly 33 1/3 RPM and its own vibrations are carefully isolated from the platter by a synthetic rubber belt and from the base by rubber isolation mountings.The tone arm must have the lowest possible mass while still maintaining a rigid, vibration-free connection to the record. To achieve this contradictory goal, the C 556 uses a hand built arm featuring an alloy tube and precision bearings at the gimbal pivot. A simple counter weight balance is combined with a magnetic anti-skate bias control to make for a friction-free pivot that allows the cartridge to operate in an ideal environment.Easy to EnjoyBy delivering the turntable with the cartridge already correctly installed and aligned, we were thinking of the many new vinyl devotees who may be less familiar with the setup requirements of a transcription turntable. Setup and operation could not be simpler—the C 556 comes complete. Just set the tone arm counter weight to the indicated position, then plug ‘n play.Whether you are new to vinyl, simply want to upgrade the sound of your vinyl collection, or even want to transcribe your LPs to digital files for playback on your computer, the NAD C 556 is the perfect choice. It is fully capable of providing the ‘vinyl magic’ that has made the LP the most successful recorded medium of all time. With the C 556, NAD is offering the best performing turntable in its 40-year history.Specifications:pressure-cast phenolic resin platter with felt mat provides excellent speed stability and protects records from scratchesprecision bronze and stainless steel ball bearing for smooth, quiet platter rotationhand-built aluminum alloy tonearm with precision gimbal pivot bearingsincludes pre-mounted Ortofon OM-5E moving magnet cartridgemagnetic anti-skate bias controlthree anti-vibration feethigh-torque synchronous-clock motor decoupled from base for reduced vibration transmission and better soundmanual operation with tonearm lift33-1/3 and 45 rpm speedsfrequency range (with included cartridge): 20-20,000 Hz (±2dB)channel separation (with included cartridge): 22dB at 1kHzattached 41" RCA audio cableweight: 8.8 lbs.17-7/16"W x 4-1/2"H (with dust cover down) x 14-1/4"D 

Use this special cleaning set to ensure that your records will last a lifetime. All items included in the cleaning set can also be purchased individual.

The MM 008 ADC is equipped with a high-resolution analogue-to-digital converter allowing you to record vinyl tracks directly onto your computer’s hard disk. It will work both with Microsoft® Windows® and Apple® Mac OS® based computerBoth Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless. Specification:Mode: MM/MC (switchable)Gain at 1 kHz: 40 dB (MM)/60 dB (MC)Input impedance (MM): 47 kΩ + 220 pF fixedInput impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)Frequency response (flat): 20 Hz - 20 kHz ±0.3 dBFrequency response (-3 dB): 10 Hz - 50 kHzRIAA curve accuracy: ±0.3 dBTHD+N: 72 dB (MC)Crosstalk: ≧40 dBInput sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)Output impedance: 47 ΩInput connections: 3 pairs of RCA sockets (left/right)Output connections: 1 pair of RCA sockets (left/right)Power supply: 24 V DCPower consumption: 3.5 W/15 mAWeight: 511 g (not including power supply)Dimensions (W x H x D): 150 x 50 x 117 mmA/D converter: Tenor TE7022L 24Bit Delta SigmaSampling rates: 8,16, 32, 44.1, 48, 96 kHzUSB output: USB 2.0, fully backward-compatible with USB 1.1Operating systems: Windows® 8, Windows® 7, Vista, XP, Mac OS®  

Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless. Specifications:Mode: MM/MC (switchable)Gain at 1 kHz: 40 dB (MM)/60 dB (MC)Input impedance (MM): 47 kΩ + 220 pF fixedInput impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)Frequency response (flat): 20 Hz - 20 kHz ±0.3 dBFrequency response (-3 dB): 10 Hz - 50 kHzRIAA curve accuracy: ±0.3 dBTHD+N: 72 dB (MC)Crosstalk: ≧40 dBInput sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)Output impedance: 47 ΩInput connections: 3 pairs of RCA sockets (left/right)Output connections: 1 pair of RCA sockets (left/right)Power supply: 24 V DCPower consumption: 3.4 W/15 mAWeight: 504 g (not including power supply)Dimensions:  (W x H x D): 150 x 50 x 117 mm

Thorens MM  002 moving-magnet phono preamplifier.Specification:Mode: Moving Magnet (MM)Gain at 1 kHz: 40 dBCartridge matching (input impedance): 47 kOhms + 220 pF fixedFrequency response: 10 Hz - 50 kHz (-3 dB)RIAA curve accuracy: ±0.3 dB max.THD+N: 86 dBCrosstalk: ≧40 dBInput sensitivity: 3.14 mVrms for -10 dBV output (316 mVrms)Max. output voltage: 498 mVrms at 5 mVrms input (1 kHz)Output impedance: 47 OhmsInput connections: 1 pair of RCA sockets (left/right)Output connections: 1 pair of RCA sockets (left/right)Power supply: 24 V DC / 630 mAPower consumption: 3.3 W / 15 mAWeight: 292 g (not including power supply)Dimensions (W x H x D): 100 x 45 x 93 mm 

Original Thorens replacement belt made of a special rubber compound. Various sizes / models available.

Manual stylus gauge for simple and accurate adjustment of the tracking force.

Non-static platter mat consisting of fine granules (cork). Made to effectively suppress the typical resonance generated in vinyl records during playback as well as to provide a silent foundation.

The Stabilizer improves stability and tracking. Supplied in a wooden box. Available in silver, matt gold, black and blue.

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.  Belt drive system with low vibration DC motor   Central gravity mass point made from artificial stone   Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom   Low resonance MDF platter with felt mat   8,6” ultra low mass tonearm with straight arm tube   Pre-adjusted tracking force & antiskating   Gold-plated RCA contacts & cartridge pins   Colour options: red-black, white-black, silver-black  Specifications:speed : 33, 45 (manual speed change)Speed variance: 33: 0,2% 45: 0,18%Wow & flutter: 33: 0,14% 45: 0,13%platter: 300mm MDFtonearm: 8,6” metal tubeeffective arm length: 218,5 mmoverhang: 22,0 mmeffective tonearmmass: 8,0grcounterweight for cartridge mass: 3 - 5,5g (included)tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)output: RCA to phono inputincluded accessory: RCA cable, 15V DC power supplypower consumption: 4,0 wattsdimensions: 430 x 90 x 300mm (WxHxD)weight: 2,7 kg net

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.  Belt drive system with low vibration DC motor   Central gravity mass point made from artificial stone   Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom   Low resonance MDF platter with felt mat   8,6” ultra low mass tonearm with straight arm tube   Pre-adjusted tracking force & antiskating   Gold-plated RCA contacts & cartridge pins   Colour options: red-black, white-black, silver-black  Specifications:speed : 33, 45 (manual speed change)Speed variance: 33: 0,2% 45: 0,18%Wow & flutter: 33: 0,14% 45: 0,13%platter: 300mm MDFtonearm: 8,6” metal tubeeffective arm length: 218,5 mmoverhang: 22,0 mmeffective tonearmmass: 8,0grcounterweight for cartridge mass: 3 - 5,5g (included)tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)output: RCA to phono inputincluded accessory: RCA cable, 15V DC power supplypower consumption: 4,0 wattsdimensions: 430 x 90 x 300mm (WxHxD)weight: 2,7 kg net

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours ​​

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system&#39;s built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver&#39;s line-level inputs, and you&#39;re ready to enjoy your LP collection all over again. Pro-Ject&#39;s clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications:compatible with moving magnet and moving coil phono cartridgesexternal power supply for reduced noise and interferencegold-plated input and output jacks for solid, corrosion-free connectionsdual-mono circuitry for optimal channel separationsmall size allows placement near turntableinput impedance: 47 kohms/120pF (MM); 100ohms/120pF (MC)gain: 40dB (MM); 60dB (MC)signal-to-noise ratio: 86dB (MM); 68dB (MC)THD: 0.01% (MM); 0.05% (MC)RIAA response accuracy: 0.5dB (20-20,000 Hz)4-1/8"W x 1-1/2"H x 5-3/8"D

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system&#39;s built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver&#39;s line-level inputs, and you&#39;re ready to enjoy your LP collection all over again. Pro-Ject&#39;s clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications:compatible with moving magnet and moving coil phono cartridgesexternal power supply for reduced noise and interferencegold-plated input and output jacks for solid, corrosion-free connectionsdual-mono circuitry for optimal channel separationsmall size allows placement near turntableinput impedance: 47 kohms/120pF (MM); 100ohms/120pF (MC)gain: 40dB (MM); 60dB (MC)signal-to-noise ratio: 86dB (MM); 68dB (MC)THD: 0.01% (MM); 0.05% (MC)RIAA response accuracy: 0.5dB (20-20,000 Hz)4-1/8"W x 1-1/2"H x 5-3/8"D

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system&#39;s built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver&#39;s line-level inputs, and you&#39;re ready to enjoy your LP collection all over again. Pro-Ject&#39;s clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications: Preamplifier for MM or MC with switch on rear panel   NEW „green“ DC power supply (< 1 watt standby power)   Precise RIAA equalisation   High quality A/D conversion with USB out to PC/Mac   Compatible with Windows®, MacOS®   SMD technology for shortest signal paths   Gold-plated RCA sockets   Output stage with ultra-low impedance   Available in black and silver

Do you have a turntable, but no phono input on your receiver, integrated amp, or shelf system? Or, does your system&#39;s built-in phono stage sound flat and lifeless? No problem — just hook up the Pro-Ject Phono Box DC preamplifer in-line between your record player and any of your receiver&#39;s line-level inputs, and you&#39;re ready to enjoy your LP collection all over again. Pro-Ject&#39;s clean, simple design uses premium quality parts to deliver the warm, relaxed sound that vinyl is famous for. Its compact all-metal body rejects interference to ensure clean sound, and the gold-plated inputs and outputs resist corrosion for the best possible signal transfer. This preamp is compatible with both moving magnet and moving coil cartridges, so you can count on proper matching with virtually any turntable and cartridge combination.Specifications: Preamplifier for MM or MC with switch on rear panel   NEW „green“ DC power supply (< 1 watt standby power)   Precise RIAA equalisation   High quality A/D conversion with USB out to PC/Mac   Compatible with Windows®, MacOS®   SMD technology for shortest signal paths   Gold-plated RCA sockets   Output stage with ultra-low impedance   Available in black and silver

Simply Analog υγρό καθαριστικό με πανάκι, κατάλληλο για οθόνες που απομακρύνει δαχτυλιές, σκόνη και λεκέδες. Έχει αντιστατική σύνθεση και δεν περιέχει αλκοόλ και αμμωνία.Περιέχει 200ml

Simply Analog συμπυκνωμένο υγρό για τον καθαρισμό βινυλίων, μη τοξικό, χωρίς αλκόολ το οποίο διαλύεται σε νερό και χρησιμοποιείται σε ειδικές συσκευές καθαρισμού δίσκων. Η συνιστώμενη αναλογία είναι 200ml συμπυκνωμένου υγρού σε 5 λίτρα απιονισμένου νερού ή 40ml συμπυκνωμένου υγρού σε 1 λίτρο απιονισμένου νερούΠεριέχει 50ml

Simply Analog υψηλής ποιότητας χειροποίητο βουρτσάκι με βελούδινο ύφασμα και λαβή από ξύλο βελανιδιάς ιδανικό για τον καθαρισμό δίσκων.