Floorstandind Speakers

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

The Bronze 500s are the largest speakers in the Bronze series and they deliver the powerful and detailed audio required by the most demanding of audiophiles. The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance. On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction. With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 21/2-Way Frequency Response (-6 dB): 41 – 25,000 Hz (Free field), 32 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 90 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.1 ohms Maximum SPL: 116 dBA (pair) Power Handling (RMS): 200 W Recommended Amplifier Requirements: 60 — 200 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 550 Hz, 2,700 Hz Drive Unit Complement: 2 x 8" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 951 x 231 x 325 mm (377/16 x 91/8 x 1213/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 974 x 294 x 364 mm (383/8 x 119/16 x 145/16") Weight (each): 18 kg (39 lb 11 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size. Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound. They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them their elegant styling will ensure they will receive admiring glances. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Hive II rear port tuned for ease of positioning without affecting sound performance Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated bi-wire terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered magnetic grilles for a more discreet appearance Add Bronze AMS Dolby Atmos® enabled speakers atop for use in any AV home cinema system Sturdy steel outrigger feet to ensure a stable platform. Designed for use on carpeted (spikes) or hard floors (rubber feet) Specifications: System Format: 2.5-Way Frequency Response (-6 dB): 45 – 25,000 Hz (Free field),35 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 88 dB Nominal Impedance: 8 ohms Minimum Impedance: 4.4 ohms Maximum SPL: 112 dBA (pair) Power Handling (RMS): 120 W Recommended Amplifier Requirements: 40 — 120 W Bass Alignment: Bass reflex Dual HiVe II port system Crossover Frequency: 700 Hz, 2,400 Hz Drive Unit Complement: 2 x 51/2" C-CAM midbass driver, 1 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 886 x 166 x 265 mm (347/8 x 69/16 x 107/16") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 909 x 229 x 304 mm (3513/16 x 9 x 1115/16") Weight (each): 12.8 kg (28 lb 4 oz) Sold As: Pair

The Spectrum X6 Bluetooth is the active floor-standing model in the Spectrum Series of speakers, which with its powerful 200W stereo built-in amplifier and multiple wired and wireless inputs, can play from a multitude of audio sources. This combination of versatility and latest technology creates the ultimate high quality audio system for any audio video installation in the home.   Scandinavian design at its bestThe new Tangent Spectrum speaker series includes both passive and active speakers with a unique Danish design. All models are available in stylish cabinet enclosures in either midnight black or polar white, highly durable matt satin finishes with protective colour matched, integrated mesh grilles.  Contrasting walnut base plinths complete the aesthetic appeal across the range.   Danish audio engineeringWith carefully developed and bespoke twin 130mm bass/mid drivers and 25mm tweeters housed in the handsome bass reflex cabinets, the new Tangent Spectrum X6 Bluetooth allows you to enjoy music and movies with the level of performance reserved only for floor standing speakers of this type.   Automatic On / OffAn ingenious feature of the new Spectrum X6 Bluetooth speaker is the so-called "wake-on" signal on both Bluetooth and AUX inputs.  This feature allows the speaker to turn on or off when the source turns on or off.  It will then also enter standby mode after 20 minutes without a signal.  So if you’re playing your music via Bluetooth, the speaker will turn off when you stop playing music after 20 minutes.  It will then automatically turn on when the same music source starts playing again. Similarly, you can allow the speaker to turn on and off via the AUX input source (mini jack). Note that this function is limited to the last source that the speaker has played.   TV speaker - operate the audio with your TV's remote controlIf your TV has a variable audio output that can be connected via an AUX cable (mini jack), you can use the Tangent Spectrum X6 Bluetooth speakers to improve the sound from your TV for your movie experience. This means you can control the volume of the speakers using your TV remote control.   Remote Control for ease of operationA neat and convenient remote control is supplied with Tangent’s new Spectrum X6 Bluetooth speakers, making them easy to switch between sources, adjust volume and pair the speakers with different Bluetooth compatible devices.     Features: Bluetooth 4.2 aptX "Wake on" AUX & Bluetooth 2 x Digital input 2 x Analogue input Phono input (til turntables) Sub out ​ Specifications: Input: Bluetooth, 3.5 mm AUX (Mini Jack), Analog RCA, Phono input, Optical Digital In, Coaxial in Output: Subwoofer Out, Speaker terminals (stereo) Speaker Units: 2 x 5" midrange and bass / 1" tweeter System: 3-ways Sensitivity: 90 dB Frequency: 50 Hz - 20 000 kHz Remote Control: Yes Power: 2 x 60W Class D Standby:

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

The Elipson Prestige Facet 34F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 34F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-way floorstanding speaker is equipped with two 10" bass drivers and two 7"mid-low drivers. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 34F's high sensitivity allows it to be paired with any amplifier with a power rating of 300 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Data sheet Speaker : Floorstanding Number of way :3 Power : 300 W RMS Tweeter : 1 " Mid-bass driver : 2 x 7 " Woofer : 2 x 10 " Frequency: Response:  (±3 dB) 25 Hz - 25 kHz Sensitivity : 94 dB/1W/1m Impedance : 6 Ohms binding post : Specific double Terminals Silver : plated for bi-wiring or bi-amp Custom-made loudspeakers : Rubber edge Finish Lacquered front panel : MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D) : 355 x 1211 x 420 mm Weight : 44,6 kg Dimensions packaging (W x H x D) : 535 x 1345 x 470 mm Weight with packaging, unit : 50 kg

The Legacy range perfectly embodies the brand's HIFI expertise! To design this new range, Elipson has taken advantage of the innovations developed over more than 60 years in-house through emblematic models such as the La Religieuse speaker, the 4050 model and the 1303 model, combined with modern materials of our time. Fast, bright, perfect extension of extreme frequencies, expressiveness of the midrange register, an aerated and realistic sound image are all qualities that characterize Legacy speakers. In the end, they forget themselves and give way to musical pleasure close to reality. Made in France, the range consists of a bookcase speaker, Legacy 3210 for limited spaces and two column speakers including the Legacy 3230, the brand's flagship. Data sheet Type: Floor Standing Sensitivity: 89 dB Impedance: 6 Ohm Finish: Walnut + Noir Satin Silver oak + Noir Satin Dimensions (W x H x D): 1105 × 276 × 360 Weight: 32.8 kg Cabinet thickness: 22-25 mm Charge bass reflex: Event large dispersion base HP Acute: AMT Ribbon HP bas-medium: 2 x 165mm aluminum with ceramic coating Power RMS: 150 W Frequency response: 35Hz-30kHz

The Legacy range perfectly embodies the brand's HIFI expertise! To design this new range, Elipson has taken advantage of the innovations developed over more than 60 years in-house through emblematic models such as the La Religieuse speaker, the 4050 model and the 1303 model, combined with modern materials of our time. Fast, bright, perfect extension of extreme frequencies, expressiveness of the midrange register, an aerated and realistic sound image are all qualities that characterize Legacy speakers. In the end, they forget themselves and give way to musical pleasure close to reality. Made in France, the range consists of a bookcase speaker, Legacy 3210 for limited spaces and two column speakers including the Legacy 3230, the brand's flagship. Data sheet Type: Floor Standing Sensitivity: 89 dB Impedance: 6 Ohm Finish: Walnut + Noir Satin Silver oak + Noir Satin Dimensions (W x H x D): 1105 × 276 × 360 Weight: 32.8 kg Cabinet thickness: 22-25 mm Charge bass reflex: Event large dispersion base HP Acute: AMT Ribbon HP bas-medium: 2 x 165mm aluminum with ceramic coating Power RMS: 150 W Frequency response: 35Hz-30kHz

Chora 826-D is a loudspeaker equipped with a specific speaker driver that reproduces Dolby Atmos® effects: for ultra-realistic 3D soundtracks and total immersion in the films you watch. Positioned on the top of the loudspeaker, this full-range speaker driver directs the sound towards the ceiling to reflect it back to the listener.  Action scenes in the air, pouring rain or a rolling thunder are all brought to life. At the same time, its directional baffle allows you to locate the sounds effects as though you had loudspeakers in the ceiling! Imagine a scene in a house: you hear conversations, but also the noise of cutlery, of footsteps... all of these spatialised in three dimensions as though you were actually there! Combining French manufacturing and design, this product also incorporates exclusive Focal technologies, particularly the Slatefiber cone of the midrange and bass speaker drivers or the Aluminium/Magnesium TNF tweeter for greater treble clarity.   For example, combined with the Chora Surround and Chora Center speakers, or the Chora Center and Chora 806 speakers, Chora 826-D guarantees a sensational system. THE TNF TWEETER A Focal exclusive and made in France in our workshops from an Aluminium/Magnesium alloy, this tweeter offers many benefits, particularly in sound spatialisation. With this tweeter, there is no shortage of sound harmony and precision. THE SLATEFIBER CONE Also made in France in Focal's workshops, it is characterised by a rich, dynamic and balanced sound, particularly in the midranges, as well as a stunning aesthetic thanks to its “slate” effect. It is the fruit of several years of R&D: the engineers have mixed ultra-lightweight recycled non-woven carbon fibres –a first in the world of audio– with thermoplastic polymer. The combination of these materials offers excellent acoustic performance. Specifications: Type: 3-way bass-reflex floorstanding loudspeaker.  Speaker drivers: 2x61/2" (16.5cm) Slatefiber Woofer 61/2" (16.5cm) Slatefiber Midrange 1" (25mm) TNF Al/Mg inverted dome tweeter. Sensitivity (2,83V/1m): 91dB Frequency response (±3 dB): 48Hz-28kHz  Low frequency point (-6 dB): 39Hz  Nominal impedance: 8Ω Minimum impedance: 2.9Ω Recommanded amplifier power: 40/250W  Crossover frequency: 270Hz - 2,700Hz  Dimensions (HxWxD): 417/16"x1115/16x151/4 (105,3cmx30,3x38,8cm)  Net weight (with grille): 48.5lbs (22.2kg)  Packaging dimensions (HxWxD): 441/2"x133/8x187/8 (113x34x48cm)  Net weight (with packaging): 59.5lbs (27kg)

The Legacy range perfectly embodies the brand's HIFI expertise! To design this new range, Elipson has taken advantage of the innovations developed over more than 60 years in-house through emblematic models such as the La Religieuse speaker, the 4050 model and the 1303 model, combined with modern materials of our time. Fast, bright, perfect extension of extreme frequencies, expressiveness of the midrange register, an aerated and realistic sound image are all qualities that characterize Legacy speakers. In the end, they forget themselves and give way to musical pleasure close to reality. Made in France, the range consists of a bookcase speaker, Legacy 3210 for limited spaces and two column speakers including the Legacy 3230, the brand's flagship. Data sheet Type: Floor Standing Sensitivity: 91 dB Impedance: 4 Ohm Finish: Walnut + Noir Satin Silver oak + Noir Satin Dimensions (W x H x D): 1340 × 347 × 450 mm Weight: 50 kg HP bas-medium: 150mm HP basse: 2 x 210mm Power RMS: 200 W Frequency response: 25Hz-30kHz

The Legacy range perfectly embodies the brand's HIFI expertise! To design this new range, Elipson has taken advantage of the innovations developed over more than 60 years in-house through emblematic models such as the La Religieuse speaker, the 4050 model and the 1303 model, combined with modern materials of our time. Fast, bright, perfect extension of extreme frequencies, expressiveness of the midrange register, an aerated and realistic sound image are all qualities that characterize Legacy speakers. In the end, they forget themselves and give way to musical pleasure close to reality. Made in France, the range consists of a bookcase speaker, Legacy 3210 for limited spaces and two column speakers including the Legacy 3230, the brand's flagship. Data sheet Type: Floor Standing Sensitivity: 91 dB Impedance: 4 Ohm Finish: Walnut + Noir Satin Silver oak + Noir Satin Dimensions (W x H x D): 1340 × 347 × 450 mm Weight: 50 kg HP bas-medium: 150mm HP basse: 2 x 210mm Power RMS: 200 W Frequency response: 25Hz-30kHz

Maestro Utopia Evo has become a three-way floorstanding loudspeaker in order to make it more versatile and easier to install in your listening room. The bass is very consistent but it still retains Maestro’s characteristic dynamic range and punch. The mid-range register hasn’t been neglected: we have integrated our latest technical innovations. In conclusion, each register reproduced by Maestro Utopia Evo has been enhanced for even more precision and dynamic range. Evo stands for evolution... Since 2008, when Utopia III was launched, Focal’s technological heritage has grown enormously. Therefore it was essential to integrate the most recent innovations into this exceptional collection. The sound architecture of Utopia III has been preserved, with the constant intention of reducing harmonic distortion in the fragile mid-range register, which is so very crucial for revealing the artist’s emotions. The two loudspeakers are equipped with Focal’s latest innovations, the NIC (Neutral Inductance Circuit) and the TMD (Tuned Mass Damping) suspension. Maestro Utopia Evo now offers bi amplification, just like Grande Utopia EM and Stella. Discerning music lovers will be able to fine-tune the type of sound, depending on the timbre and the power they’re looking to achieve. The best components from their generation have also found their way into the Utopia III Evo line: cables made in France, denser acoustic materials inside the subwoofer, double terminal boards and separate crossovers. New finishes with distinctive colour-ways offer many options for today’s contemporary spaces. The 2017 edition of Utopia III Evo is an iconic line. They integrate a whole range of innovations and essential detailing, making them completely unique. They are still way ahead of any other line.

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The new Chora 816 model is a 2.5-way bass-reflex floorstanding loudspeaker. Its woofer and midrange/bass speaker driver, both equipped with the Slatefiber cone, work in perfect harmony for a voluptuous sound reproduction and a perfect bass impact. The sound finds its full dimension in your listening room, with a dynamic midrange and remarkable power handling. A front port is placed below the loudspeaker to reduce distortion and, thanks to the tilt of the loudspeaker stand, Time Alignment provides a soundstage focused on the listener. Chora 816 is particularly well suited for Home Cinema listening and blends seamlessly into rooms of up to 323ft² (30m²).The TNF Aluminium/Magnesium tweeter- Soft and precise trebleThe surround linking the dome to its stand uses a memory foam material called Poron. This surround is directly derived from the Utopia’s famous Beryllium tweeter and reduces distortion by a third between 2,000Hz and 3,000Hz, the ear’s high-sensitivity range. The spatialisation and very low directionality of the inverted dome allow silky trebles to be heard from any point in your listening room.The Slatefiber cone - Perfectly balanced soundSlatefiber technology, exclusive to Focal, involves the use of recycled, non-woven carbon fibres applied as a sandwich between two layers of thermoplastic polymer. In their quest for perfection, Focal engineers have opted to use non-woven carbon fibres, all pointing in the same direction to achieve even greater rigidity and better damping. 
Manufactured in the Focal workshops using an ultra-modern industrial tool, the “slate” effect of the cone provides better damping and rigidity, but also lightness – the three “essentials” of a good speaker driver. A sleek, modern designThe Chora range offers a modern design, the slate colour of the Slatefiber cone adding a final refined, authentic touch. 
The stand (optional) is tilted for Time Alignment which provides an optimal soundstage, more focused on the listener.

The Prestige Facet 14F is a 2-and-a-half-way floorstanding speaker. Equally clear and detailed in the highs as it is deep and lively in the lows, this speaker will allow you to rediscover your favorite tracks. The Elipson Prestige Facet 14F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 14F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This floorstanding speaker is equipped with a bass driver and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 14F's high sensitivity allows it to be paired with any amplifier with a power rating of 150 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 2½ Power 150 W RMS Tweeter1 " Mid-bass driver 6,5 " Woofer 6,5 " Frequency Response (±3 dB)38 Hz - 25 kHz Sensitivity 92 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)238 x 1026 x 351 mm Weight20,5 kg Dimensions packaging (W x H x D)315 x 1120 x 400 mm Weight with packaging, unit22,6 kg

A tall, 3-and-a-half-way model, the Prestige Facet 24F has a commanding presence thanks to its elegant design and impressive sonic performance, which combines finesse with power. The Elipson Prestige Facet 24F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 24F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-and-a-half-way floorstanding speaker is equipped with two 20 cm bass drivers and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 24F's high sensitivity allows it to be paired with any amplifier with a power rating of 250 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 3 1/2 Power 250 W RMS Tweeter 1 " Mid-bass driver 6,5 " Woofer 2 x 8 " Frequency Response (±3 dB)28 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)274 x 1137 x 383 mm Weight26,5 kg Dimensions packaging (W x H x D)350 x 1225 x 460 mm Weight with packaging, unit29,9 kg

A tall, 3-and-a-half-way model, the Prestige Facet 24F has a commanding presence thanks to its elegant design and impressive sonic performance, which combines finesse with power. The Elipson Prestige Facet 24F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 24F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-and-a-half-way floorstanding speaker is equipped with two 20 cm bass drivers and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 24F's high sensitivity allows it to be paired with any amplifier with a power rating of 250 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 3 1/2 Power 250 W RMS Tweeter 1 " Mid-bass driver 6,5 " Woofer 2 x 8 " Frequency Response (±3 dB)28 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)274 x 1137 x 383 mm Weight26,5 kg Dimensions packaging (W x H x D)350 x 1225 x 460 mm Weight with packaging, unit29,9 kg

A tall, 3-and-a-half-way model, the Prestige Facet 24F has a commanding presence thanks to its elegant design and impressive sonic performance, which combines finesse with power. The Elipson Prestige Facet 24F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 24F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This 3-and-a-half-way floorstanding speaker is equipped with two 20 cm bass drivers and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 24F's high sensitivity allows it to be paired with any amplifier with a power rating of 250 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 3 1/2 Power 250 W RMS Tweeter 1 " Mid-bass driver 6,5 " Woofer 2 x 8 " Frequency Response (±3 dB)28 Hz - 25 kHz Sensitivity 93 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)274 x 1137 x 383 mm Weight26,5 kg Dimensions packaging (W x H x D)350 x 1225 x 460 mm Weight with packaging, unit29,9 kg

The Prestige Facet 14F is a 2-and-a-half-way floorstanding speaker. Equally clear and detailed in the highs as it is deep and lively in the lows, this speaker will allow you to rediscover your favorite tracks. The Elipson Prestige Facet 14F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 14F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This floorstanding speaker is equipped with a bass driver and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 14F's high sensitivity allows it to be paired with any amplifier with a power rating of 150 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 2½ Power 150 W RMS Tweeter1 " Mid-bass driver 6,5 " Woofer 6,5 " Frequency Response (±3 dB)38 Hz - 25 kHz Sensitivity 92 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)238 x 1026 x 351 mm Weight20,5 kg Dimensions packaging (W x H x D)315 x 1120 x 400 mm Weight with packaging, unit22,6 kg

The Prestige Facet 14F is a 2-and-a-half-way floorstanding speaker. Equally clear and detailed in the highs as it is deep and lively in the lows, this speaker will allow you to rediscover your favorite tracks. The Elipson Prestige Facet 14F speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor. The Prestige Facet 14F is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. This floorstanding speaker is equipped with a bass driver and a 17 cm mid-low driver. The latter is fitted with a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion. A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience. Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel. At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals. Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The Prestige Facet 14F's high sensitivity allows it to be paired with any amplifier with a power rating of 150 W or less per channel. Its lively performance make it an excellent left or right front channel speaker for a multichannel home cinema installation. Specifications : Speaker Floorstanding Number of way 2½ Power 150 W RMS Tweeter1 " Mid-bass driver 6,5 " Woofer 6,5 " Frequency Response (±3 dB)38 Hz - 25 kHz Sensitivity 92 dB/1W/1m Impedance 6 Ohms binding post Specific double Terminals Silver plated for bi-wiring or bi-amp Custom-made loudspeakers Rubber edge Loudspeakers On specifications Reinforcement Internals Removable base and spikes Amovible Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)238 x 1026 x 351 mm Weight20,5 kg Dimensions packaging (W x H x D)315 x 1120 x 400 mm Weight with packaging, unit22,6 kg

Leveraging over 70 years of acoustic technology, the Klipsch RP-6000F floorstanding speaker delivers incredible acoustic clarity for a premium listening experience. Features: 1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn Dual 6.5" Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Dual binding posts for bi-wire/bi-amp Strong, Flexible Removable Magnetic Grille Dimensions: 39.62” x 9.35” x 17.02” HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the RP-6000F floorstanding speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible. HORN ANATOMYKlipsch Reference Premiere series speakers feature a compressed molded silicon face thats matted to the 90x90 Tractrix horn to reduces horn resonance for a smoother frequency response. Klipsch computer modeled phase plugs acts as a mechanical filter to further ensure a smooth, flat frequency response while protecting the tweeter from damage. ALL-NEW VENTED TWEETERA vented tweeter design reduces standing waves behind the tweeter diaphragm for a smoother high frequency reproduction. The titanium tweeter diaphragm's light weight yet rigid composition exceeds the performance of aluminum, polymer or silk tweeters. Klipsch award-winning Linear Travel Suspension technology leverages a piston motion of the titanium diaphragm that lowers distortion and delivers real-to-life sound. A ceramic magnet housing provides premium performance, Klipsch Reference Premiere tweeters set the standard in acoustic reproduction. CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the RP-6000F floorstanding speaker signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency. WOOFER ANATOMYKlipsch Cerametallic™ cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity. Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution. TRACTRIX® PORT + DUAL TERMINALSThe rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. The RP-6000F floorstanding speaker features dual input terminals so you can bi-wire or bi-amp your speakers for a custom, high-performance experience. FINISHED TO PERFECTIONThe RP-6000F ebony and walnut finishes boast satin painted baffles with a scratch resistant design. The cast aluminum feet provides a modern look with less resonance than MDF or ABS plastic. It is mechanically designed to minimize surface area in contact with the floor, decoupling the speaker for faster, tighter low frequencies and more detail.

Leveraging over 70 years of acoustic technology, the Klipsch RP-6000F floorstanding speaker delivers incredible acoustic clarity for a premium listening experience. Features: 1” Titanium LTS Vented Tweeter with Hybrid Tractrix® Horn Dual 6.5" Spun Copper Cerametallic™ Woofers Bass-Reflex via Rear-Firing Tractrix® port Dual binding posts for bi-wire/bi-amp Strong, Flexible Removable Magnetic Grille Dimensions: 39.62” x 9.35” x 17.02” HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the RP-6000F floorstanding speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible. HORN ANATOMYKlipsch Reference Premiere series speakers feature a compressed molded silicon face thats matted to the 90x90 Tractrix horn to reduces horn resonance for a smoother frequency response. Klipsch computer modeled phase plugs acts as a mechanical filter to further ensure a smooth, flat frequency response while protecting the tweeter from damage. ALL-NEW VENTED TWEETERA vented tweeter design reduces standing waves behind the tweeter diaphragm for a smoother high frequency reproduction. The titanium tweeter diaphragm's light weight yet rigid composition exceeds the performance of aluminum, polymer or silk tweeters. Klipsch award-winning Linear Travel Suspension technology leverages a piston motion of the titanium diaphragm that lowers distortion and delivers real-to-life sound. A ceramic magnet housing provides premium performance, Klipsch Reference Premiere tweeters set the standard in acoustic reproduction. CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the RP-6000F floorstanding speaker signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency. WOOFER ANATOMYKlipsch Cerametallic™ cones are matted to a dual-layer, copper-wound voice coil for exceptional conductivity. Reference Premiere woofers are housed in a non-resonating, stamped-steel basket that’s secured to a large magnet motor for exceptional efficiency and low distortion, and matched to our horn-loaded tweeters for optimal acoustic execution. TRACTRIX® PORT + DUAL TERMINALSThe rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. The RP-6000F floorstanding speaker features dual input terminals so you can bi-wire or bi-amp your speakers for a custom, high-performance experience. FINISHED TO PERFECTIONThe RP-6000F ebony and walnut finishes boast satin painted baffles with a scratch resistant design. The cast aluminum feet provides a modern look with less resonance than MDF or ABS plastic. It is mechanically designed to minimize surface area in contact with the floor, decoupling the speaker for faster, tighter low frequencies and more detail.

The Klipsch R-820F floorstanding speaker fills your room with amazing detail and clarity. Leveraging our proprietary horn-loaded technology and featuring dual 8" spun-copper IMG woofers, the R-820F delivers lifelike acoustics that bring your music and movies to life. Features : 1" Aluminum LTS tweeter 90x90 Square Tractrix Horn Dual 8" Spun-Copper IMG Woofers Bass-Reflex via Rear-Firing Tractrix ports Strong, Flexible Removable Magnetic Grille Dimensions: 43" x 10.9" x 17.5" Tractrix Horn TechnologyKlipsch exclusive 90x90º Tractrix horn technology ensures the high frequency energy is aimed at the listener and reduces artificial reverb or filtering caused by indirect sound bouncing off of walls. Using this proprietary focused technology gives you the best clarity, dynamics, and detail from your movies and music. Linear Travel Suspension TweeterKlipsch exclusive Linear Travel Suspension (LTS) aluminum tweeter minimizes distortion for enhanced, detailed performances. Using Kapton, an extremely light and rigid material, in the tweeter suspension provides high efficiency and improve resolution and detail. LTS tweeters are a hallmark of Klipsch speakers, making them some of the best speakers in the world. Spun Copper Img WoofersInjection Molded Graphite (IMG) woofer cones are exceptionally light while being extremely rigid – providing remarkable low frequency response, with minimal cone breakup and distortion. When paired with the Tractrix Horn-Loaded LTS Tweeter, it provides speaker efficiency highest in its class. Rear Tractrix PortThe rear Tractrix port is perfectly matched to the cabinet and woofers, creating ideal airflow with minimal distortion or turbulence even at the lowest frequencies. Sleek DesignExposed fasteners, angled feet, low profile magnetic grilles and a scratch-resistant, textured wood grain vinyl give the speaker a polished, modern appearance. High Quality Cabinet DesignReinforced MDF construction reduces cabinet vibration for less audible coloration and improved sonic accuracy - giving you the ultimate listening experience that's built to last. Scratch-Resistant, Textured Wood Grain VinylStylish aesthetic with absolute durability that results in a seamless integration into any décor. Add Dolby AtmosThe addition of elevation speakers reflects sound from the ceiling to put sound anywhere in your room it needs to be, truly making you feel like you’re in the middle of the action.

The Spectrum X6 Bluetooth is the active floor-standing model in the Spectrum Series of speakers, which with its powerful 200W stereo built-in amplifier and multiple wired and wireless inputs, can play from a multitude of audio sources. This combination of versatility and latest technology creates the ultimate high quality audio system for any audio video installation in the home. Scandinavian design at its bestThe new Tangent Spectrum speaker series includes both passive and active speakers with a unique Danish design. All models are available in stylish cabinet enclosures in either midnight black or polar white, highly durable matt satin finishes with protective colour matched, integrated mesh grilles.  Contrasting walnut base plinths complete the aesthetic appeal across the range. Danish audio engineeringWith carefully developed and bespoke twin 130mm bass/mid drivers and 25mm tweeters housed in the handsome bass reflex cabinets, the new Tangent Spectrum X6 Bluetooth allows you to enjoy music and movies with the level of performance reserved only for floor standing speakers of this type. Automatic On / OffAn ingenious feature of the new Spectrum X6 Bluetooth speaker is the so-called "wake-on" signal on both Bluetooth and AUX inputs.  This feature allows the speaker to turn on or off when the source turns on or off.  It will then also enter standby mode after 20 minutes without a signal.  So if you’re playing your music via Bluetooth, the speaker will turn off when you stop playing music after 20 minutes.  It will then automatically turn on when the same music source starts playing again. Similarly, you can allow the speaker to turn on and off via the AUX input source (mini jack). Note that this function is limited to the last source that the speaker has played. TV speaker - operate the audio with your TV's remote controlIf your TV has a variable audio output that can be connected via an AUX cable (mini jack), you can use the Tangent Spectrum X6 Bluetooth speakers to improve the sound from your TV for your movie experience. This means you can control the volume of the speakers using your TV remote control. Remote Control for ease of operationA neat and convenient remote control is supplied with Tangent’s new Spectrum X6 Bluetooth speakers, making them easy to switch between sources, adjust volume and pair the speakers with different Bluetooth compatible devices.   Features:Bluetooth 4.2 aptX"Wake on" AUX & Bluetooth2 x Digital input2 x Analogue inputPhono input (til turntables)Sub out​Specifications:Input: Bluetooth, 3.5 mm AUX (Mini Jack), Analog RCA, Phono input, Optical Digital In, Coaxial inOutput: Subwoofer Out, Speaker terminals (stereo)Speaker Units: 2 x 5" midrange and bass / 1" tweeterSystem: 3-waysSensitivity: 90 dBFrequency: 50 Hz - 20 000 kHzRemote Control: YesPower: 2 x 60W Class DStandby:

The Grimm Audio  LS1 is the most technologically advanced loudspeaker system ever!This top class music playback system features now a new ultra light Berylium tweeter with a CNC milled aluminium waveguide, jointly developed by Grimm Audio and Seas. We selected Hi-Macs for the new cabinets, a modern and very rigid material, and it looks great too! A good monitor combines a high degree of accuracy with untrammeled musicality. There aren't many of those around - common wisdom has it that you can have one or the other but never both. The LS1 is the first monitor to prove conventional wisdom wrong.By integrating top quality digital signal processing, converters and amplifiers in one of the speakers' legs, Grimm Audio was able to apply technical strategies no one had used before. As a consequence, the LS1 is not just a loudspeaker, but a complete audio system that only needs an analog or digital line source to perform.“This speaker is explicitly for those who want the most neutral and transparent sound reproduction, no corners were cut.”True accuracy is about getting all the bits in the right place: not losing anything, not adding anything either. The LS1 offers this accuracy, reproducing a truly musical recording accurately, with all beauty intact. At the same time, the LS1 will also reproduce any imperfection, giving you all the information you need to get it right. These qualities make the LS1 an ideal monitor for both mastering and mixing.Don't let the stylish industrial design and finish fool you: the shape of this loudspeaker is the outcome of thorough psychoacoustical and acoustical research. Its small sealed box (14 litres) is much wider than it is deep, is designed to provide an effective baffle down to around 250 Hz.That way, the LS1 achieves a reasonable constant directivity in 2π space above 250 Hz (with a natural and progressive “narrowing” of its high frequency off-axis response) minimizing many of the listening room’s detrimental effects (Psychoacoustics tells us that below about 300 Hz the ear will no longer clearly discern direct sound, first reflections or reverberant sound), while below 250 Hz the speaker gradually transitions to omnidirectional.“The wide baffle halves the volume into which the sound is radiated, thereby halving room problems as well. The cylindrical sides eliminate the classical "big box" colouration that is caused by edge diffractions.”The LS1 is suspended between two half cylinders that combat diffraction and function as an integral two-legged floor stand. An 8" magnesium woofer and a 1" dome tweeter divide the work between them. Smart use of DSP linearizes the frequency response and allows for a controlled bass response down to 35 Hz.Housed in one of the two legs are a 48/76-bit DSP, digital I/O, AD/DA converters, the same clock circuit as Grimm’s own CC1 master clock and the drive electronics, encompassing two 180W Class D power amplifiers of the groundbreaking Hypex NCore type.The concept of the LS1 draws maximum benefit from intelligent application of DSP technology. An IIR crossover imposes exact LR4 acoustic slopes crossing at 1550 Hz, and the phase is subsequently corrected using an idealised inverted all-pass filter, resulting in a maximally linear phase response without any pre-echo’s. This removes the “digital loudspeaker sound signature” typical of the more ubiquitous impulse inverted FIR designs.“The waveguide tweeter, the perfectly pistonic woofer (both by the world famous Seas company) and the very low crossover frequency insure that the sound is radiated in an unusually wide and even manner.Grimm LS1’s carefully controlled acoustics form the basis for the active DSP based filter which welds the driver responses together into the most even-handed frequency response and the fastest impulse response you'll ever hear.”The LS1 is also a very practical loudspeaker. Its digital input allows them to be connected without further ado to network players like Squeezebox or Sonos, or to a Mac or PC using the included USB converter. The pictures on the right hand show a few options.Despite their compact size, these floor standing speakers are clearly intended as main monitors in mastering studios and mixing rooms that have space to put free-standing speakers. The DSP controlled analog subwoofer output allows for easy integration with stereo subwoofers, for those that need high SPL performance below 40 Hz.By selecting Grimm’s own LS1s subwoofers, perfect integration with the main system is obtained, effectively turning the LS1 into a threeway system.More info can be found at the LS1 remote and the LS1s subwoofer page.For Measurement Charts (both in-house and third party – German Audio Magazine’s May 2013 issue) and photos of the LS1 please refer to the pictures section of this page.Features:Unidirectional down to 250 HzDSP controlled frequency curveWell-behaved off-axis responseDigital and analog audio inputsFiltered analog subwoofer outputFail safe due to excursion and thermal limiterMidi control of volume and settingsSuper low distortion NCore class D power ampsAudiophile quality Seas driversRemote control optionDifferent color scheme options Specifications:·         Frequency response: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Low corner is user-settable between 35 Hz and 100 Hz, Q=0.7 or 0.5)With the addition of the LS1s Subwoofers, the LS1 can perform almost down to the infrasonic range·         Deviation from minimum phase +/-2°·         Amplifier power: 2x180W·         Max SPL: 109dB/1m·         SNR: 114dB (unweighted)·         Crossover function: 1.55 kHz LR4, sum corrected to minimum phase.·         Latency: 2ms·         Internal volume: 14 litres·         Height: 1150mm, 1450mm - available on demand.·         Width, depth: 520mm X 160mmFurther Resources:·         Download the LS1 PC remote software

The Grimm Audio  LS1 is the most technologically advanced loudspeaker system ever!  The LS1a is a reference system at somewhat limited budget having an aluminium woofer instead of the magnesium woofer of the original LS1.This top class music playback system features now a new ultra light Berylium tweeter with a CNC milled aluminium waveguide, jointly developed by Grimm Audio and Seas. We selected Hi-Macs for the new cabinets, a modern and very rigid material, and it looks great too! A good monitor combines a high degree of accuracy with untrammeled musicality. There aren't many of those around - common wisdom has it that you can have one or the other but never both. The LS1 is the first monitor to prove conventional wisdom wrong.By integrating top quality digital signal processing, converters and amplifiers in one of the speakers' legs, Grimm Audio was able to apply technical strategies no one had used before. As a consequence, the LS1 is not just a loudspeaker, but a complete audio system that only needs an analog or digital line source to perform.“This speaker is explicitly for those who want the most neutral and transparent sound reproduction, no corners were cut.”True accuracy is about getting all the bits in the right place: not losing anything, not adding anything either. The LS1 offers this accuracy, reproducing a truly musical recording accurately, with all beauty intact. At the same time, the LS1 will also reproduce any imperfection, giving you all the information you need to get it right. These qualities make the LS1 an ideal monitor for both mastering and mixing.Don't let the stylish industrial design and finish fool you: the shape of this loudspeaker is the outcome of thorough psychoacoustical and acoustical research. Its small sealed box (14 litres) is much wider than it is deep, is designed to provide an effective baffle down to around 250 Hz.That way, the LS1 achieves a reasonable constant directivity in 2π space above 250 Hz (with a natural and progressive “narrowing” of its high frequency off-axis response) minimizing many of the listening room’s detrimental effects (Psychoacoustics tells us that below about 300 Hz the ear will no longer clearly discern direct sound, first reflections or reverberant sound), while below 250 Hz the speaker gradually transitions to omnidirectional.“The wide baffle halves the volume into which the sound is radiated, thereby halving room problems as well. The cylindrical sides eliminate the classical "big box" colouration that is caused by edge diffractions.”The LS1 is suspended between two half cylinders that combat diffraction and function as an integral two-legged floor stand. An 8" magnesium woofer and a 1" dome tweeter divide the work between them. Smart use of DSP linearizes the frequency response and allows for a controlled bass response down to 35 Hz.Housed in one of the two legs are a 48/76-bit DSP, digital I/O, AD/DA converters, the same clock circuit as Grimm’s own CC1 master clock and the drive electronics, encompassing two 180W Class D power amplifiers of the groundbreaking Hypex NCore type.The concept of the LS1 draws maximum benefit from intelligent application of DSP technology. An IIR crossover imposes exact LR4 acoustic slopes crossing at 1550 Hz, and the phase is subsequently corrected using an idealised inverted all-pass filter, resulting in a maximally linear phase response without any pre-echo’s. This removes the “digital loudspeaker sound signature” typical of the more ubiquitous impulse inverted FIR designs.“The waveguide tweeter, the perfectly pistonic woofer (both by the world famous Seas company) and the very low crossover frequency insure that the sound is radiated in an unusually wide and even manner.Grimm LS1’s carefully controlled acoustics form the basis for the active DSP based filter which welds the driver responses together into the most even-handed frequency response and the fastest impulse response you'll ever hear.”The LS1 is also a very practical loudspeaker. Its digital input allows them to be connected without further ado to network players like Squeezebox or Sonos, or to a Mac or PC using the included USB converter. The pictures on the right hand show a few options.Despite their compact size, these floor standing speakers are clearly intended as main monitors in mastering studios and mixing rooms that have space to put free-standing speakers. The DSP controlled analog subwoofer output allows for easy integration with stereo subwoofers, for those that need high SPL performance below 40 Hz.By selecting Grimm’s own LS1s subwoofers, perfect integration with the main system is obtained, effectively turning the LS1 into a threeway system.More info can be found at the LS1 remote and the LS1s subwoofer page.For Measurement Charts (both in-house and third party – German Audio Magazine’s May 2013 issue) and photos of the LS1 please refer to the pictures section of this page.Features:Unidirectional down to 250 HzDSP controlled frequency curveWell-behaved off-axis responseDigital and analog audio inputsFiltered analog subwoofer outputFail safe due to excursion and thermal limiterMidi control of volume and settingsSuper low distortion NCore class D power ampsAudiophile quality Seas driversRemote control optionDifferent color scheme options Specifications:·         Frequency response: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Low corner is user-settable between 35 Hz and 100 Hz, Q=0.7 or 0.5)With the addition of the LS1s Subwoofers, the LS1 can perform almost down to the infrasonic range·         Deviation from minimum phase +/-2°·         Amplifier power: 2x180W·         Max SPL: 109dB/1m·         SNR: 114dB (unweighted)·         Crossover function: 1.55 kHz LR4, sum corrected to minimum phase.·         Latency: 2ms·         Internal volume: 14 litres·         Height: 1150mm, 1450mm - available on demand.·         Width, depth: 520mm X 160mmFurther Resources:·         Download the LS1 PC remote software

The Grimm Audio  LS1 is the most technologically advanced loudspeaker system ever!A good monitor combines a high degree of accuracy with untrammeled musicality. There aren't many of those around - common wisdom has it that you can have one or the other but never both. The LS1 is the first monitor to prove conventional wisdom wrong.By integrating top quality digital signal processing, converters and amplifiers in one of the speakers' legs, Grimm Audio was able to apply technical strategies no one had used before. As a consequence, the LS1 is not just a loudspeaker, but a complete audio system that only needs an analog or digital line source to perform.“This speaker is explicitly for those who want the most neutral and transparent sound reproduction, no corners were cut.”True accuracy is about getting all the bits in the right place: not losing anything, not adding anything either. The LS1 offers this accuracy, reproducing a truly musical recording accurately, with all beauty intact. At the same time, the LS1 will also reproduce any imperfection, giving you all the information you need to get it right. These qualities make the LS1 an ideal monitor for both mastering and mixing.Don't let the stylish industrial design and finish fool you: the shape of this loudspeaker is the outcome of thorough psychoacoustical and acoustical research. Its small sealed box (14 litres) is much wider than it is deep, is designed to provide an effective baffle down to around 250 Hz.That way, the LS1 achieves a reasonable constant directivity in 2π space above 250 Hz (with a natural and progressive “narrowing” of its high frequency off-axis response) minimizing many of the listening room’s detrimental effects (Psychoacoustics tells us that below about 300 Hz the ear will no longer clearly discern direct sound, first reflections or reverberant sound), while below 250 Hz the speaker gradually transitions to omnidirectional.“The wide baffle halves the volume into which the sound is radiated, thereby halving room problems as well. The cylindrical sides eliminate the classical "big box" colouration that is caused by edge diffractions.”The LS1 is suspended between two half cylinders that combat diffraction and function as an integral two-legged floor stand. An 8" magnesium woofer and a 1" dome tweeter divide the work between them. Smart use of DSP linearizes the frequency response and allows for a controlled bass response down to 35 Hz.Housed in one of the two legs are a 48/76-bit DSP, digital I/O, AD/DA converters, the same clock circuit as Grimm’s own CC1 master clock and the drive electronics, encompassing two 180W Class D power amplifiers of the groundbreaking Hypex NCore type.The concept of the LS1 draws maximum benefit from intelligent application of DSP technology. An IIR crossover imposes exact LR4 acoustic slopes crossing at 1550 Hz, and the phase is subsequently corrected using an idealised inverted all-pass filter, resulting in a maximally linear phase response without any pre-echo’s. This removes the “digital loudspeaker sound signature” typical of the more ubiquitous impulse inverted FIR designs.“The waveguide tweeter, the perfectly pistonic woofer (both by the world famous Seas company) and the very low crossover frequency insure that the sound is radiated in an unusually wide and even manner.Grimm LS1’s carefully controlled acoustics form the basis for the active DSP based filter which welds the driver responses together into the most even-handed frequency response and the fastest impulse response you'll ever hear.”The LS1 is also a very practical loudspeaker. Its digital input allows them to be connected without further ado to network players like Squeezebox or Sonos, or to a Mac or PC using the included USB converter. The pictures on the right hand show a few options.Despite their compact size, these floor standing speakers are clearly intended as main monitors in mastering studios and mixing rooms that have space to put free-standing speakers. The DSP controlled analog subwoofer output allows for easy integration with stereo subwoofers, for those that need high SPL performance below 40 Hz.By selecting Grimm’s own LS1s subwoofers, perfect integration with the main system is obtained, effectively turning the LS1 into a threeway system.More info can be found at the LS1 remote and the LS1s subwoofer page.For Measurement Charts (both in-house and third party – German Audio Magazine’s May 2013 issue) and photos of the LS1 please refer to the pictures section of this page.Features:Unidirectional down to 250 HzDSP controlled frequency curveWell-behaved off-axis responseDigital and analog audio inputsFiltered analog subwoofer outputFail safe due to excursion and thermal limiterMidi control of volume and settingsSuper low distortion NCore class D power ampsAudiophile quality Seas driversRemote control optionDifferent color scheme options Specifications:·         Frequency response: 55Hz-30kHz +/-0.5dB. 45Hz-40kHz -3dB(Low corner is user-settable between 35 Hz and 100 Hz, Q=0.7 or 0.5)With the addition of the LS1s Subwoofers, the LS1 can perform almost down to the infrasonic range·         Deviation from minimum phase +/-2°·         Amplifier power: 2x180W·         Max SPL: 109dB/1m·         SNR: 114dB (unweighted)·         Crossover function: 1.55 kHz LR4, sum corrected to minimum phase.·         Latency: 2ms·         Internal volume: 14 litres·         Height: 1150mm, 1450mm - available on demand.·         Width, depth: 520mm X 160mmFurther Resources:·         Download the LS1 PC remote software

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm.The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. Inherited from the EPICON series, the RUBICON series utilizes the same SMC technology and soft dome diaphragm.The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.Upping the audio ante to the extreme, the RUBICON 8 is quite simply stunning in terms of the epic soundstage it presents. The trio of woofers work by kicking in at different frequencies, making the RUBICON 8 loudspeaker, the pinnacle of your entry into the world of high-end audio at a mid-range price.Delivering a totally transparent image with a richness of detail that recreates the passion of a live performance, the wider sound dispersion afforded by our hybrid tweeter helps the RUBICON 8 fill even the most sizeable of spaces with the purest audio your ears will ever witness.Combine the RUBICON 8 with a pair of RUBICON 2 or RUBICON LCR, a RUBICON VOKALand a SUB M-10 D to get an ideal surround experience.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 90.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 112Recommended Amplifier Power [W] : 40 - 250Crossover Frequency [Hz] : 500 / 800 / 2.500 / 14.000Crossover Principle : 2½ + ½ + ½ way Hybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : RibbonHybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 3 x 6½"Low frequency driver, Diaphragm type : Wood Fibre ConeEnclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 1,100 x 220 x 445Weight [kg] : 27.3Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room.The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup.  SMC MAGNET SYSTEMWith a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.HYBRID TWEETER MODULEThe hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.CABINET CONSTRUCTIONDividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.WOOD FIBRE CONESUsing a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly. Specifications :Frequency Range (+/-3 dB) [Hz] : 38 - 34.000Sensitivity (2,83 V/1 m) [dB] : 88.5Nominal Impedance [ohms] : 4Maximum SPL [dB] : 110Recommended Amplifier Power [W] : 40 - 200Crossover Frequency [Hz] : 800 / 2,600 / 14,000Crossover Principle : 2½ + ½-wayHybrid tweeter module, Super high freq. driver, Quantity : 1 x 17 x 45 mmHybrid tweeter module, Super high freq. driver, Diaphragm type : Ribbon Hybrid tweeter module, High frequency driver, Quantity : 1 x 29 mmHybrid tweeter module, High frequency driver Diaphragm type : Soft Textile Dome Low frequency driver, Quantity : 2 X 6½"Low frequency driver, Diaphragm type : Wood Fibre Cone Enclosure type : Bass Reflex Bass Reflex Tuning Frequency [Hz] : 33.5Connection Input : Bi-Wiring Magnetic Shielding : NoRecommended Placement : Floor Recommended Distance From Wall [cm] : 20 - 180Dimensions With Base (HxWxD) [mm] : 990 x 200 x 380Weight [kg] : 20.2Accessories Included : Manual Micro Fibre Cloth Rubber Bumpers Spikes M8