Early Black Friday

Ένα μικρό ηχείο με ιδιαίτερα καλό ήχο για την κατηγορία και το μέγεθος του. Hi-Fi σε πολύ λογική τιμή ! 2-way bass reflex system Max. power 60W Max. power 90W Frequency range +/- 4 dB 60-22.000Hz Impedance 4-8 Ohm 25 mm soft dome tweeter Woofer 130 mm, shielded Dimensions (HxWxD) 245 x 155 x 195mm Weight 3.2Kg Calvados finish, Light beech, Black and white

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

The PF6ATM compact speaker was specifically designed to be placed atop a floorstanding speaker. Facing the ceiling, it reproduces surround effects present in the Dolby Atmos audio tracks offered by new Blu-ray movies. It adds a vertical dimension to the sound of a traditional 5.1 system to offer the viewer more realism and greater immersion. With the Elipson Prestige Facet 6ATM, the home cinema experience is more intense than ever before. These speakers handle the full range of immersive multichannel formats and add a vertical dimension to the listening experience. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... As for their sonic performance, it is certified Dolby Atmos and meets a demanding set of criteria. The speaker is equipped with a 14 cm driver installed in a sealed enclosure for the reproduction of lows and mids. A bullet-shaped phase plug is installed in the center of the driver to limit vibrations and, consequently, reduce distortion. The driver's multifaceted, sculpted silicone surround ring serves to reduce the baffle effect and limit diffractions. At the front, a 25 mm soft dome tweeter offers ultra-efficient sound directivity, which is required for sound waves to reflect off the ceiling properly and for mid-highs to be kept from reaching the side walls. The result is a frequency response ranging from 65 Hz to 25 kHz (± 3 dB). Its 15° angle allows it to be placed atop a floorstanding speaker in order to obtain optimal reproduction of surround sound effects and live the intense experience of total immersion. Specifications : Speaker Atmos Number of way 2 Power 70 W RMS Tweeter 25 mm Mid-bass driver 140 mm Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 90 dB/1W/1m Impedance 6 Ohms Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)207 x 181 x 290 mm Weight4,8 kg Weight with packaging, pair (W x H x D)370 x 300x 370 mm Weight with packaging, pair10,5 kg

The PF6ATM compact speaker was specifically designed to be placed atop a floorstanding speaker. Facing the ceiling, it reproduces surround effects present in the Dolby Atmos audio tracks offered by new Blu-ray movies. It adds a vertical dimension to the sound of a traditional 5.1 system to offer the viewer more realism and greater immersion. With the Elipson Prestige Facet 6ATM, the home cinema experience is more intense than ever before. These speakers handle the full range of immersive multichannel formats and add a vertical dimension to the listening experience. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... As for their sonic performance, it is certified Dolby Atmos and meets a demanding set of criteria. The speaker is equipped with a 14 cm driver installed in a sealed enclosure for the reproduction of lows and mids. A bullet-shaped phase plug is installed in the center of the driver to limit vibrations and, consequently, reduce distortion. The driver's multifaceted, sculpted silicone surround ring serves to reduce the baffle effect and limit diffractions. At the front, a 25 mm soft dome tweeter offers ultra-efficient sound directivity, which is required for sound waves to reflect off the ceiling properly and for mid-highs to be kept from reaching the side walls. The result is a frequency response ranging from 65 Hz to 25 kHz (± 3 dB). Its 15° angle allows it to be placed atop a floorstanding speaker in order to obtain optimal reproduction of surround sound effects and live the intense experience of total immersion. Specifications : Speaker Atmos Number of way 2 Power 70 W RMS Tweeter 25 mm Mid-bass driver 140 mm Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 90 dB/1W/1m Impedance 6 Ohms Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)207 x 181 x 290 mm Weight4,8 kg Weight with packaging, pair (W x H x D)370 x 300x 370 mm Weight with packaging, pair10,5 kg

The Elipson SUB8 is the element which brings breadth and depth to your films. Compact, it blends in harmoniously with your interior and delivers all the intensity you'll need. Subwoofers are a fundamental part of a home cinema installation. The Elipson SUB8 is the element of choice to bring breadth and depth to your films. It is equipped with a 26 cm driver installed in a bass-reflex configuration. As such, it is designed to produce a considerable amount of sound pressure and offer a physical listening experience. The Elipson SUB8's elegantly designed cabinet inherits exclusive technologies from the Prestige Facet family and is available in black, white or walnut. The subwoofer's very linear frequency response ranges from 35 Hz to 150 Hz (± 3 dB). Its multifaceted, sculpted silicone surround ring limits diffractions and minimizes the baffle effect. The frequency response curve is thus more gradual and the listening experience more comfortable. The bass-reflex port situated beneath the subwoofer improves the diffusion of low and infrabass frequencies throughout the entire listening room regardless of where the subwoofer is placed. The integrated Class D amplifier develops 150 watts of power. The diameter of its driver and its performance make the Elipson SUB8 an element of choice to complete your home cinema installation and bring it all the intensity required by the Seventh Art. Specifications : Speaker Subwoofer Power 150 W RMS Woofer 8 " Class D Frequency Response (±3 dB)35 Hz - 150 Hz Subsonic filter 24 dB à 20 Hz Variable cut-off frequency 50 Hz à 150 Hz Standby Auto Input Stereo line level, LFE Custom-made loudspeakers Rubber edge Loudspeakers On specifications Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)350 x 374 x 383 mm Weight15,5 kg Dimensions packaging (W x H x D)445 x 500 x 435 mm Weight with packaging, unit16,7 kg

The Elipson RAIN speakers are the ideal solution to bring sound to your indoor and outdoor living areas without compromising on sound quality. This range of state-of-the-art speakers is suitable for any environment, no matter the weather conditions. The Elipson RAIN two-way speakers are veritable all-terrain models that are just as suited to intense cold or hot temperatures as they are to extreme humidity. These weatherproof speakers will be at home by the poolside, in the garden, in a sunroom or under a porch, but also in bars, restaurants, kitchens, spas or outdoor terraces. The RAIN speakers are meticulously assembled and come with an ultra-rigid, anti-UV case and a rustproof grill, all of which contribute to their extensive lifespan. Each RAIN model has an integrated wall mount system. Easy to install, this system provides a 180° dispersion angle, ensuring optimal sound quality that fills the entire area. Three sizes are available depending on the amount of power needed: the RAIN 4, RAIN 6 and RAIN 8 which feature a mid-bass driver of 4”, 6.5” and 7.9” respectively. The Elipson RAIN speakers are available in a white or black finish.   Specifications : Type 2-way outdoor speaker Power 150W Frequency Response (±3 dB) 70Hz - 20KHz Crossover frequency 3200 Hz Sensitivity 90 dB/1W/1m Impedance 8 Ohms Loudspeakers Tweeter : 1" Mid-bass : 8" Dimensions W244 x H355 x D230 mm Indice de protection IPX4 Température min -25°C Température max +70°C (25% humidity) Résistance à l'humidité +40°C under 95% Traitements Anti-rust, anti-UV

The Elipson RAIN two-way speakers are veritable all-terrain models that are just as suited to intense cold or hot temperatures as they are to extreme humidity. These weatherproof speakers will be at home by the poolside, in the garden, in a sunroom or under a porch, but also in bars, restaurants, kitchens, spas or outdoor terraces. The RAIN speakers are meticulously assembled and come with an ultra-rigid, anti-UV case and a rustproof grill, all of which contribute to their extensive lifespan. Each RAIN model has an integrated wall mount system. Easy to install, this system provides a 180° dispersion angle, ensuring optimal sound quality that fills the entire area. Three sizes are available depending on the amount of power needed: the RAIN 4, RAIN 6 and RAIN 8 which feature a mid-bass driver of 4”, 6.5” and 7.9” respectively. The Elipson RAIN speakers are available in a white or black finish. Specifications:Type: 2-way outdoor speakerPower: 120WFrequency Response (±3 dB): 80Hz - 20KHzCrossover frequency: 3000 HzSensitivity: 89 dB/1W/1mImpedance: 8 OhmsLoudspeakers: Tweeter : 25 mm Mid-bass : 165 mmIndice de protection: IPX4Température min: -25°CTempérature max: +70°C (25% humidity)Résistance à l'humidité: +40°C under 95%Traitements: Anti-rust, anti-UV

Inspired Re-creation of a Legendary Small-diaphragm CondenserTheir acclaimed compressors and preamps have famously upset the pro audio price/performance ratio. When Warm Audio turned its attention to the granddaddy of small-diaphragm FET condenser microphones, you know it had to be good. And it is. Flash back to any top recording studio in the 1970s. You'll see the venerable '84 everywhere. Engineers who have worked with different generations of this perennial studio favorite know that the vintage ones have a warmer, more forgiving sonic character. It's these circuit designs — dating back nearly half a century — that Warm Audio closely followed for the WA-84. Stellar performance, top-shelf parts, and amazing value: that's the Warm formula — and the WA-84 nails it.Quality components make the Warm differenceWarm Audio doesn't cut corners on components, but they do order parts and build in quantity, which keeps costs down and delivers amazing value. Featuring a meticulously crafted vintage reproduction capsule, WA-84 is built with premium all-discrete components that include Fairchild transistors, Wima capacitors, and a CineMag USA transformer. Designed for professional commercial and home studios, live sound reinforcement, and broadcast applications, the WA-84 has the uncanny ability to finesse a wide range of sources, such as acoustic guitars, double bass, drums and percussion, piano, strings, brass and woodwinds, and more.What can the WA-84 do for you?Every studio needs at least one pair of high-quality small-diaphragm condenser mics, and the Warm Audio WA-84 is designed after a legendary one. With its versatile cardioid polar pattern and 10dB pad, you can use the WA-84 on any instrument — with world-class results. It makes snares and tom toms sound huge. It's great for drum overheads, capturing cymbals with warmth and vibrancy. It's perfect for adding a bit of room to complement a close dynamic or ribbon mic on a guitar cabinet. Engage the pad, and move the mic right up on the speaker grille.Double your value with a pair of these excellent micsThe WA-84 is an ideal choice for piano, vibraphone, marimba, congas, strings, woodwinds, and so much more. The list goes on, but suffice to say: You haven't lived until you've heard a grand piano spring to life when miked with a pair of WA-84s. For drum room mics, use two of them and nuke the stereo signal with a fast limiter. Positively explosive! Considering its amazing price, it would be wise to double your value and get (at least) two for recording tracks in stereo.Warm Audio WA-84 Small-diaphragm Condenser Microphone Features: Cardioid polar pattern Fully discrete signal path Vintage reproduction capsule CineMag USA Transformer 48V phantom powered Frequency Range: 20Hz–20kHz Sensitivity: -39dB or 11mV/Pa @ 1kHz Output Impedance: 200Ω Rated Load Impedance: ≥1kΩ Switchable Pad: -10dB Maximum SPL: 123/133dB @ 1kHz, 0.5% THD, 0/-10dB S/N Ratio: 78dBA (IEC651) Equivalent noise: 16dBA (IEC651) Dynamic range: 107dBA (IEC651) Connector: 3-pin gold-plated XLR Includes microphone, cardioid capsule, shockmount, mic clip, windscreen, carrying case A look inside the WA-84 The Capsule The WA-84 utilizes a custom vintage-style capsule designed to emulate classic componentry and design techniques. The WA-84’s capsule is carefully manufactured by an Australian capsule supplier and is precisely reproduced to vintage specs. We are pleased to offer such a high quality capsule in this microphone which allows us to nail the sonics of the most important component of any microphone. The Circuit The WA-84 is a fully discrete Class A design that utilizes a CineMag USA transformer, polystyrene and Wima capacitors and a Fairchild FET. The Transformer The WA-84 utilizes an American made CineMag USA transformer that contributes to the legendary creamy smooth top-end and the BEEFY mid to bottom-end one would hope to get from an 84-style small diaphragm condenser microphone. The Capacitors The WA-84 proudly utilizes Wima, polystyrene and tantalum through-hole capacitors throughout.

The ULN2 3D upgrade card is a user-installable internal expansion board for the Metric Halo ULN2 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology.3D replaces the ULN2’s built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI.The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integrationMain FeaturesPreloaded SPDIF/AES EdgebusUSB-C Connectivity2x GigE MH-Link ports75Ω BNC Word Clock I/OShips with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cableLegacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2PerformanceSupported Sample Rates: 44.1k — 192kMono Mix Busses:64Mono Mix Inputs:128Mix Crosspoints: 8192 (fully interpolated)VU Meters: 1024PPM Meters: 1024Peak Meters: 1024Router Crosspoints: 1024Point-To-Point Router Latency: 3 samples (< 16 µs)MH Link Total System Latency: 3 samples (< 16 µs)DSPDSP Memory: 1GBCores: 2I/OUSB: 1x USB-C port (Host & device capable)MH Link/Ethernet ports: 2x Gigabit Ethernet

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

The Elipson RAIN two-way speakers are veritable all-terrain models that are just as suited to intense cold or hot temperatures as they are to extreme humidity. These weatherproof speakers will be at home by the poolside, in the garden, in a sunroom or under a porch, but also in bars, restaurants, kitchens, spas or outdoor terraces. The RAIN speakers are meticulously assembled and come with an ultra-rigid, anti-UV case and a rustproof grill, all of which contribute to their extensive lifespan. Each RAIN model has an integrated wall mount system. Easy to install, this system provides a 180° dispersion angle, ensuring optimal sound quality that fills the entire area. Three sizes are available depending on the amount of power needed: the RAIN 4, RAIN 6 and RAIN 8 which feature a mid-bass driver of 4”, 6.5” and 7.9” respectively. The Elipson RAIN speakers are available in a white or black finish. Specifications:Type: 2-way outdoor speakerPower: 120WFrequency Response (±3 dB): 80Hz - 20KHzCrossover frequency: 3000 HzSensitivity: 89 dB/1W/1mImpedance: 8 OhmsLoudspeakers: Tweeter : 25 mm Mid-bass : 165 mmIndice de protection: IPX4Température min: -25°CTempérature max: +70°C (25% humidity)Résistance à l&#39;humidité: +40°C under 95%Traitements: Anti-rust, anti-UV

The Elipson Prestige Facet 8B speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor.The Prestige Facet 8B is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. Medium-sized, it is equipped with a 17 cm low midrange driver featuring a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion.A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The experts weren't wrong when they awarded the Elipson Prestige Facet 8B speaker with the Choc Classica and Diapason d'Or awards. A champion in its category!The Prestige Facet 8B's high sensitivity allows it to be paired with any amplifier with a power rating of 85 W or less per channel. Its lively performance make it an excellent surround sound speaker for a home cinema installation.   Specifications:Speaker: BookshelfNumber of way: 2Power: 85 W RMSTweeter: 1 "Mid-bass driver: 6,5 "Frequency Response (±3 dB): 47 Hz - 25 kHzSensitivity: 91 dB/1W/1mImpedance: 6 OhmsDimensions (W x H x D): 230 x 361 x 347 mmWeight with packaging, pair (W x H x D): 525 x 460 x 405 mmWeight with packaging, pair: 20,3 kg

Combining classic audio design with new technology Tangent's new premium radio Tuner ll provides easy and reliable access to many local and national radio stations thanks to its latest technology high quality tuner.  The FM analogue part of the tuner features RDS and is both clear and refined, whilst the digital DAB and DAB + tuners offer fast, locked-in reception of all available DAB + channels with stunning clarity.  The large white text LED display clearly provides the information you need whichever radio band and station you’re listening to. Hi-Fi sound quality from a mini radio The new Tuner ll fits effortlessly into Tangent's new mini system. By combining the Tangent Ampster BT II and CD ll, you can enjoy a complete, compact sized HI-FI system with premium audio quality and performance.  Each Tuner ll, Ampster BT ll and CD ll is less than the width of an A4 sheet of paper and is only 7cm high, making the system only 21cm high when stacked! So the small size of each component takes up less space in the living room, kitchen - or wherever you enjoy your music. A remote control for all The remote control for the Tuner II also operates the Ampster BT II and CD ll, so when all three components are stacked together or placed separately, each remote control can be used to operate all components.  Or you can choose to use only one remote control and put the two other remotes away!   Features FM/DAB/DAB+ Built-in power supply Alu Front Optical and analogue out

SOUND LIKE A LEGENDThe WA-251 was created to offer a classic microphone design to a new generation of recording artists at an affordable price. We spent a great deal of time listening to different ‘251 microphones to determine what people liked about them and why, how various styles of components impact the tone, and how to give the WA-251 microphone a signature that pays homage to the vintage classic, but also stands out on its own.The WA-251 is an all vacuum tube, large diaphragm, transformer balanced, multi-pattern, large condenser microphone, based on the classic ‘251 that has been used on countless hit records for the last 50+ years. The WA-251 is designed for pro studio, home studio, live, and broadcast applications and sounds great on vocals, acoustic/electric guitars, acoustic/electric bass, drums, piano, strings, brass/woodwind instruments, and an array of other sources. DESIGNThe classic ‘251 became extremely popular as a vocal microphone in the 1960’s and is now considered to be one of the greatest condenser microphones ever created. The classic ‘251 is still widely used today in professional recording studios but has become extremely rare and cost prohibitive to acquire.Designing our WA-251 to sound like the classic ‘251 was no easy task, especially since some of the vintage components are no longer manufactured or available. We are pleased to release such a gorgeous sounding classic to the market at a price that’s reachable to more people than ever before.SPECIFICATIONS CUSTOM WA-12-B-60V EDGE TERMINATED, DUAL-BACKPLATE, ALL-BRASS VINTAGE CK12-STYLE CAPSULE CINEMAG USA OUTPUT TRANSFORMER JJ SLOVAK 12AY7 VACUUM TUBE GOTHAM 5 METER GAC-7, 7-PIN TUBE MICROPHONE CABLE WIMA, SOLEN FRENCH, AND POLYSTYRENE CAPACITORS POLAR PATTERNS: 3 PATTERNS - CARDIOID, OMNI, FIGURE-OF-EIGHT FREQUENCY RANGE: 20 HZ~20 KHZ OUTPUT IMPEDANCE: 200 OHMS MAXIMUM SPL: 132DB (

It’s time to enjoy your CD collection again As part of Tangent’s new mini-system, the CD II plays an integral role when connected with the new Ampster II and Tuner II. Due to its mini, compact size you’ll now be able to play your CD collection on a player that’s both space saving and technology future-proof.  The CD II is a multi-format digital disk player that’s compatible with all current CD formats (including home-made MP3 files)… and with both digital optical and regular line-outputs, the CD II is designed to produce lossless connectivity to any separates HI-FI system. High quality CD sound from a mini player The new CD ll fits effortlessly into Tangent's new mini system. By combining the Tangent Ampster BT II and Tuner ll, you can enjoy a complete, compact sized HI-FI system with premium audio quality and performance.  Each CD ll, Ampster BT ll and Tuner ll is less than the width of an A4 sheet of paper and is only 7cm high, making the system only 21cm high when stacked! So the small size of each component takes up less space in the living room, kitchen - or wherever you enjoy your music. A remote control for all The remote control for the CD II also operates the Ampster BT II and Tuner ll, so when all three components are stacked together or placed separately, each remote control can be used to operate all components.  Or you can choose to use only one remote control and put the two other remotes away!   Features Optical digital out Analog RCA out Compact design Built-in power supply 

The COMP-2A is a one channel vintage style Compressor / Leveler using vacuum tubes in the signal and side-chain path. The input and output is transformer balanced, using two different transformers, each one optimized for its purpose. This is the way audio components were built before transistors and integrated circuits became available.Integrated circuits are small and cheap and widely used in most modern designs. The drawback is that audio components built with modern technology doesn´t always provide the best perceived sound quality or the type of character that the modern user desires.The subjective sound quality delivered by vintage equipment is often prefered over the one delivered by modern units, a situation that is even more obvious now when music is recorded with clean-sounding digital audio equipment.This is the reason why so many vintage audio components are cloned and produced again and also why the vintage originals are often very expensive on the second hand market.The circuit used in the COMP-2A is based on a classic design that was originally produced in the early 1960s and it was initially intended for broadcast applications. It uses an electro-luminescent panel and a photoelectric cell to control gain. This gives it a unique, program dependent compression characteristic. In addition, the all tube signal path and the transformers adds a wonderful and musical character to the sound.The ease of use with only two main controls makes it very simple to achieve the desired sound. These attributes has made the original units a favourite of engineers and musicians worldwide. This classic sound is now available at a very affordable price point with the COMP-2A.Features:Vintage style all tube signal path. The tubes are fitted with grounded shields.Transformer balanced input and output. Can drive almost any load, balanced or unbalanced.Golden Age Project's version of the classic optical unit using a long life electroluminescent panel and two carefully matched Silonex NSL5910 photoresistors for T4B-style electro-optical gain control with program dependent attack and release times.Very simple to operate with only two main controls, Gain and Peak Reduction.HF control can make the side-chain circuit more sensitive to mid and high frequency content.Linear low noise regulated filament and high voltage power supply.A big meter selectable to show gain reduction or output level at two different reference levels.Hardwire bypass switch for easy comparisons.XLR and TRS input and output jacks for flexible connections.Link jack and switch for connecting to another unit for stereo operation.All external controls located on the front panel.Compact 2RU half rack format. Two units can be mounted with our 19-inch rack kit, the UNITE BIG.A solid build quality that will last many years of normal use.

Since the early 1990’s, the Manley ELOP® stereo electro-optical limiter has been a tracking hero effortlessly controlling dynamics on countless records around the globe, delivering the coveted classic, all-tube sound that Manley Labs is known for. So how do you improve on something this good? Well, for starters, we have now added a 3:1 compression ratio feature which opens up the doors to greater versatility, especially for 2-buss applications. The 2016 ELOP+ has been completely re-engineered from the ground-up, beginning with our amazing modern high voltage switching power supply purpose-designed for our vacuum tube audio circuits. With careful reference to our sonic past, we have deployed our highest performance vacuum tube line amplifier and White Follower output stage in this new version all housed in a build-efficient chassis behind a drop-dead gorgeous precision-CNC-milled faceplate, all proudly made in America, of course. The new Manley ELOP+ is everything you love about our legendary ELOP, plus!Features:10:1 Limiter and 3:1 Compressor ratiosAll-tube audio path uses 5751 and 6922 dual triodesBalanced Manley IRON® transformer-coupled XLR InputsXLR impedance-balanced outputsBYPASS switches and AUTOMUTE with warm-up delayLarge illuminated VU meters read Gain Reduction or Output levelsSTEREO LINKSide-Chain High-Pass FilterUniversal internal power supply operates worldwide 90-250V~AC 50/60Hz

The Manley Nu Mu gives you the best sonic qualities of both tube and transistor compressors. Manley spec'd the Nu Mu with the all-tube, T-Bar-modded front end of their fabled Variable Mu and followed it with a state-of-the-art solid-state audio chain. At Sweetwater, we're quite impressed by the results - silky smooth, fat, and punchy! Manley's innovative HIP circuit is onboard, enhancing low-level detail without taking a toll on dramatic transients. Handcrafted in the company's Chino, California, factory, the Nu Mu delivers superior sonics, performance, build quality, and value - exactly what you'd expect from Manley.Advanced dynamics control is yours with the Manley Nu Mu!Manley Nu Mu Features:Hybrid tube/solid-state compressor/limiterDual channel (stereo linkable)Features Manley's IRON input transformers4 hand-selected and matched 6BA6 vacuum tubesBalanced XLR I/OHIP circuit elevates softer dynamics without crushing louder onesLighted VU meters, switchable between Gain Reduction and Output LevelCustom, internal, universal high-voltage switched-mode power supply, for worldwide operation SpecificationsType: Tube/solid state (4 x 6BA6 vacuum tubes)Number of Channels:    2Controls: Threshold, Attack, Recovery, OutputRatio: 1.5:1, 4:1 to 20:1Side Chain Inserts:  2 x 1/4" TRSInputs:  2 x XLROutputs:  2 x XLRRack Spaces:  2UHeight:  3.5"Depth:  7"Width;  19"Weight:  8.5 lbs.Manufacturer Part Number:  NuMu​

Manley designed the Core reference channel strip so that you can hit record and focus on your performance, not your signal chain. It sports the quality, performance, and flexibility their VOXBOX is known for, at a price that makes it accessible to any serious artist or engineer. You get a world-class Manley mic pre, followed by a 3:1 ELOP style compressor for effortless dynamic control. Engineers at Athens Mastering are ecstatic over the active Baxandall EQ, and a fast attack FET brickwall limiter at the end of the chain protects your converters from accidental clipping. Even if you plug right in without tweaking a single knob, you're sure to get an amazing sound.Manley Core Reference Channel Strip Features:Easy to use and awesome-sounding channel strip based on the award-winning VOXBOXClass A tube mic preamplifier with Manley's hand-wound transformersDirect input uses the same circuit as the Manley SLAM! for fantastic direct-instrument recordingsELOP compressor with 3:1 ratio tames any signal transparentlyBaxandall EQ with low/high shelving and sweepable mid for flexible sonic sculptingFast attack FET brickwall limiter ensures you don't clip your converters during recordingFlexible metering can display input, output, and compressor gain reduction levels 

The PRE-73 DLX is a one-channel vintage style microphone-, line- and instrument preamplifier.The signal path uses only discrete components like resistors, capacitors and transistors. The line and microphone input and the line output are transformer balanced, using three different transformers, each one optimized for its purpose.This is the way audio components were built before integrated circuits became available. The subjective sound quality delivered by vintage equipment is often prefered over the one delivered by modern units, a situation that is even more obvious now when music is recorded with clean-sounding digital audio equipment.The circuit used in the PRE-73 DLX is similar to the preamp section in the classical 1073 module with a corresponding sound character that is warm, punchy, sweet and musical. These classic characteristics have been heard on countless recordings through the years and it is a versatile sound that works very well on most sound sources and in most genres.The essence of this sound is now available at a surprisingly low cost, making it available to nearly everyone.The PRE-73 DLX has a number of improvement and new features compared to the PRE-73 MKII:- Tantalum capacitors in the signal path.- Selectable 1073-style high pass filter, 50Hz, 80Hz, 160Hz and 300Hz.- Output Attenuator -7, -14, -21 and -28 dB (located after the output transformer) allows overdriving the output stage and the output transformer for added character by lowering the output signal to a suitable level.- The circuit board is prepared for Carnhill Mic and Line transformer and high pass inductor.- The Insert jack can be switched in/out from the front panel. An internal jumper can select that the Insert jack always has an output signal.- Switchable 600 ohm Output Termination and Ground Lift on the back panel.- Selectable Active or Passive DI input and selectable input impedance in active mode, Hi Z or 100 kohm, by internal jumpers.- The DI can signal can be selected to pass or bypass the mic input transformer by internal jumpers.- Relays are used to control internal switching for DI input, Phantom power, Mic Low Z, Insert and Phase for shorter circuit board signal paths. The relays are controlled by front panel switches.- Revised gain switch for added headroom.- Circuit board star grounding scheme.- Revised power supply with separate regulators for the audio circuits and relay and LED circuits.

Shock mount with an integrated pop filter

The MANLEY VARIABLE MU® LIMITER COMPRESSOR has been our best selling product for many years. It is one of the very few compressors that has become a real standard in Mastering studios and contributed to most hit records over the last decade and probably the next. "Mu" is tube-speak for gain, and Variable Mu® is our registered trademark for this limiter compressor. It works by using the "remote cut-off" or re-biasing of a vacuum tube to achieve compression. The precious vintage Fairchild 670 also uses this technique and is one of few all-tube compressor to do so, that we know of. Even the side-chain has glowing rectifier bottles. How’s it work? The unique 5670 dual triode is at the center of the peak-reducing and compression action constantly being re-biased by the vacuum tube rectified side-chain control voltages which cause this tube to smoothly change its gain. Just like that.The COMPRESS mode is soft-knee 1.5 to 1 ratio while the sharper knee LIMIT mode starts at 4 to 1 and moves to a more dramatic ratio of 20 to 1 when limiting over 12dB. Interestingly, the knee actually softens as more limiting is used. Distortion can be creatively used by turning up the Input and turning down the Output while using very little or no compression. See the gain reduction curves here!You might notice that the Variable Mu® Limiter Compressor has a ganged input control, but do not jump to conclusions that it is mono-unfriendly. Track away! There are separate threshold and output controls to make compensations with plus you can always adjust your individual source levels elsewhere, right? The advantage of the stereo input control becomes dramatically clear when you switch to LINK mode, and that’s what our Variable Mu® Limiter Compressor does better than anything else: final mix, 2-track, or mastering limiting and compression. Like one reviewer put it: “It’s like pouring a bowl of sweet cream over the mix.” Mmmmmm. Yummy. Give your music a big hug.Specifications:MANLEY input & output transformers with nickel laminations in mu-metal cases with flat frequency response from 20Hz-25KHzBALANCED INPUTS & OUTPUTS (600 Ohms)Fully differential ALL-TUBE circuitry using one each 5670, 5751, 7044 or 5687, & 12AL5 per channelIndependently regulated B+ and Heater suppliesHard-wire BYPASS switchStepped switch INPUT attenuator as of 10/2011. (older units use Silent dual-ganged potentiometer)RECOVERY 5 steps: 0.2s, 0.4s, 0.6s, 4sec., 8sec.Variable ATTACK: 25msec-70msecContinuously variable THRESHOLDLIMIT (4:1 to 20:1) or COMPRESS (1.5 to 1)HP SC: High Pass Side Chain Filter -3dB @ 100HzLarge ILLUMINATED Sifam METERS (older units before serial number MSLC61642 shipped before 12/2003 use: 26V 1.2W FESTOON LAMPS; Manley's Part Number: VAR016B) Order spare bulbs using our parts order form. (newest units after serial number MSLC61642 shipped after 12/2003 use white LED lighting)STEREO LINK SWITCHSeveral units can be linked for Surround (custom order )Maximum gain: 35dBMax. output: +30dBu (26Vrms) 26dB Headroom

Golden Age Unite is a  1U rack, for 2 Pre 73 or various combinations of Pre 73,Pre 73 DLX,  EQ 73 and Comp 54

The FC 4 is a lowcost, small capsule, true condenser microphne with transformerless discrete low noise class-A electronics. The 20 mm, 3 um gold-sputtered diaphragm has a cardioid shaped polar pattern and a great sensitivety.  The characteristics of the FC 4 are ideal for many recording and live situations. It will catch the crisp of your favourite guitar, every detail of your acoustic piano, the complexity of a clean electric guitar, the raw power of distorted amps, etc. We have equipped the FC 4 with high-pass filter and pad switches. This also makes it suitable for loud sounds and even vocal recording.  Every musichan and studio have use for a couple of FC 4s. The small capsule cardioid condenser mic is one of the most basic mics for recording ever made. The FC 4 is truely a very versatile microphone at a very low price!

The FC 1 MKII was designed with classic large diaphragm condenser microphones in mind. We wanted to make an affordable mic with some of the characteristics of the good old German models.  The FC 1 has a center-terminated capsule just like in the old days, adding some harmonic distortion and a sweet top to the sound. This design also gives the mic an ability to handle louder sounds without harshness or other problems. The output transformer can handle bass really well and still give you that extra fat sound that only tubes and transformers can deliver.  The retro EQ in the FC 1 is set to deliver maximum sound quality with as many sound sources as possible at a price anyone can afford. It sounds great on vocals, acoustic guitar, percussion, amps, piano, leslie, drums, and more.