Black Friday

It is one of the most talented compact speakers of its generation. Awarded the famous 5-star label What Hi-Fi, the Eltax Monitor III shines with a thousand qualities. The serious product is prodigious considering its small size. Two speakers drive this compact speaker, one 13 cm bass midrange speaker loaded in Bass-reflex through a lower tubular vent, as well as a soft dome tweeter, for a response from 50 Hz to 22 kHz. The tweeter is solidly motorized and offers a very detailed high-midrange register, synonymous with relief and precision. The Eltax Monitor III is equally at home in hi-fi and home cinema. Best of all, the speaker has decoupling pins and a bi-amplification terminal block.

Ένα μικρό ηχείο με ιδιαίτερα καλό ήχο για την κατηγορία και το μέγεθος του. Hi-Fi σε πολύ λογική τιμή ! 2-way bass reflex system Max. power 60W Max. power 90W Frequency range +/- 4 dB 60-22.000Hz Impedance 4-8 Ohm 25 mm soft dome tweeter Woofer 130 mm, shielded Dimensions (HxWxD) 245 x 155 x 195mm Weight 3.2Kg Calvados finish, Light beech, Black and white

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

The PF6ATM compact speaker was specifically designed to be placed atop a floorstanding speaker. Facing the ceiling, it reproduces surround effects present in the Dolby Atmos audio tracks offered by new Blu-ray movies. It adds a vertical dimension to the sound of a traditional 5.1 system to offer the viewer more realism and greater immersion. With the Elipson Prestige Facet 6ATM, the home cinema experience is more intense than ever before. These speakers handle the full range of immersive multichannel formats and add a vertical dimension to the listening experience. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... As for their sonic performance, it is certified Dolby Atmos and meets a demanding set of criteria. The speaker is equipped with a 14 cm driver installed in a sealed enclosure for the reproduction of lows and mids. A bullet-shaped phase plug is installed in the center of the driver to limit vibrations and, consequently, reduce distortion. The driver's multifaceted, sculpted silicone surround ring serves to reduce the baffle effect and limit diffractions. At the front, a 25 mm soft dome tweeter offers ultra-efficient sound directivity, which is required for sound waves to reflect off the ceiling properly and for mid-highs to be kept from reaching the side walls. The result is a frequency response ranging from 65 Hz to 25 kHz (± 3 dB). Its 15° angle allows it to be placed atop a floorstanding speaker in order to obtain optimal reproduction of surround sound effects and live the intense experience of total immersion. Specifications : Speaker Atmos Number of way 2 Power 70 W RMS Tweeter 25 mm Mid-bass driver 140 mm Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 90 dB/1W/1m Impedance 6 Ohms Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)207 x 181 x 290 mm Weight4,8 kg Weight with packaging, pair (W x H x D)370 x 300x 370 mm Weight with packaging, pair10,5 kg

The PF6ATM compact speaker was specifically designed to be placed atop a floorstanding speaker. Facing the ceiling, it reproduces surround effects present in the Dolby Atmos audio tracks offered by new Blu-ray movies. It adds a vertical dimension to the sound of a traditional 5.1 system to offer the viewer more realism and greater immersion. With the Elipson Prestige Facet 6ATM, the home cinema experience is more intense than ever before. These speakers handle the full range of immersive multichannel formats and add a vertical dimension to the listening experience. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... As for their sonic performance, it is certified Dolby Atmos and meets a demanding set of criteria. The speaker is equipped with a 14 cm driver installed in a sealed enclosure for the reproduction of lows and mids. A bullet-shaped phase plug is installed in the center of the driver to limit vibrations and, consequently, reduce distortion. The driver's multifaceted, sculpted silicone surround ring serves to reduce the baffle effect and limit diffractions. At the front, a 25 mm soft dome tweeter offers ultra-efficient sound directivity, which is required for sound waves to reflect off the ceiling properly and for mid-highs to be kept from reaching the side walls. The result is a frequency response ranging from 65 Hz to 25 kHz (± 3 dB). Its 15° angle allows it to be placed atop a floorstanding speaker in order to obtain optimal reproduction of surround sound effects and live the intense experience of total immersion. Specifications : Speaker Atmos Number of way 2 Power 70 W RMS Tweeter 25 mm Mid-bass driver 140 mm Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 90 dB/1W/1m Impedance 6 Ohms Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)207 x 181 x 290 mm Weight4,8 kg Weight with packaging, pair (W x H x D)370 x 300x 370 mm Weight with packaging, pair10,5 kg

The Elipson SUB8 is the element which brings breadth and depth to your films. Compact, it blends in harmoniously with your interior and delivers all the intensity you'll need. Subwoofers are a fundamental part of a home cinema installation. The Elipson SUB8 is the element of choice to bring breadth and depth to your films. It is equipped with a 26 cm driver installed in a bass-reflex configuration. As such, it is designed to produce a considerable amount of sound pressure and offer a physical listening experience. The Elipson SUB8's elegantly designed cabinet inherits exclusive technologies from the Prestige Facet family and is available in black, white or walnut. The subwoofer's very linear frequency response ranges from 35 Hz to 150 Hz (± 3 dB). Its multifaceted, sculpted silicone surround ring limits diffractions and minimizes the baffle effect. The frequency response curve is thus more gradual and the listening experience more comfortable. The bass-reflex port situated beneath the subwoofer improves the diffusion of low and infrabass frequencies throughout the entire listening room regardless of where the subwoofer is placed. The integrated Class D amplifier develops 150 watts of power. The diameter of its driver and its performance make the Elipson SUB8 an element of choice to complete your home cinema installation and bring it all the intensity required by the Seventh Art. Specifications : Speaker Subwoofer Power 150 W RMS Woofer 8 " Class D Frequency Response (±3 dB)35 Hz - 150 Hz Subsonic filter 24 dB à 20 Hz Variable cut-off frequency 50 Hz à 150 Hz Standby Auto Input Stereo line level, LFE Custom-made loudspeakers Rubber edge Loudspeakers On specifications Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)350 x 374 x 383 mm Weight15,5 kg Dimensions packaging (W x H x D)445 x 500 x 435 mm Weight with packaging, unit16,7 kg

The PRODIPE GUITARS ST83RA series follows the greatest tradition of SOLID BODY guitar manufacture. The best craftsmen for an unmatched result: a good density basswood body, a neck in vintage varnished maple, a rosewood fingerboard for a warmer, less percussive sound. We have also chosen to fit ALNICO V pickups, and a set of nickel-coated D'ADDARIO 9-42 strings for an exceptional result in this price range. ALNICO V pickups are made with an aluminium-nickel-cobalt alloy, which offers several advantages : Lower magnetic field than a ceramic pickup, for optimum string vibration giving more sustain. Unlike ceramic pickups, ALNICO pickups contain 6 separate magnets. This allows us to choose the perfect configuration for each string during manufacture, thus achieving better balance. The aluminium-nickel-cobalt alloy is also ideal for a palette of warm, full, precise sounds. Finally, the pickup configuration of the ST83RA range comprises a double coil pickup and two single coils; the double pickup provides a high output level, ideal for heavy saturations and without parasite sound. Specifications : Brand : PRODIPE GUITARS Series : ST83RA Model : ST83RA Body : Basswood Neck : Maple traditional varnish radius 9.5 inch Nut and saddle : ABS fitted Pickguard : Three-ply ivory Pickups : ALNICO V, 1 double and 2 single coils Fingerboard : Artificial rosewood Finition : Traditional varnish Tuning machine : Die-cast chrome Strings : D'ADDARIO EXL-120 - Tension 9-42 Electronic : 5-way switch, 1 volume and 2 tone Bridge : Standard vintage, six saddles

ALTAMIRA is produced by great luthiers who are recognised worldwide. This new collaboration with PRODIPE GUITARS enables us to offer you a faultless instrument in the tradition of the great luthiers of the past. Soundboard of solid German cedar and bone nut and bridge on a guitar costing only 319 €! Apart from its sound quality, the finish is remarkable: a superb traditional gloss varnish and double maple binding. The attractive price at this level of excellence makes the PRODIPE GUITARS RECITAL 200 a world reference in music conservatories. Specifications : Brand : Classical guitar Prodipe Guitars by Altamira Series : Recital by Altamira Model : Recital 200 Top : Solid german cedar Back and sides : African mahogany Binding filets : Double maple Neck : African mahogany Nut and saddle : Fitted bone Veneer : Mahogany Fingerboard : Rosewood Finition : Gloss varnish Tuning machine : Top of the range nickel-plated Strings : D'ADDARIO EXP J44/J46 or SAVAREZ Cantiga Alliance

The fruit of an active, passionate, exciting collaboration with luthier Yao HANSON, the creator of ALTAMIRA guitars. With its solid cedar soundboard, associated with a typically Spanish sound, African mahogany back and satin finish, the PRODIPE GUITARS STUDENTdelivers a powerful, warm, direct sound with very comfortable playing. Also available in 3/4 size for younger players, and regularly recommended by teachers, this excellent guitar at a very attractive price is already making all the difference for students. Specifications : Brand : Classical guitar Prodipe Guitars Series : Conservatoire Model : STUDENT Top : Solid cedar Back and sides : Mahogany Binding filets : Maple Neck : Mahogany Nut and saddle : Fitted bone Fingerboard : Rosewood Finition : Ssatin varnish Tuning machine : Top of the range nickel-plated Strings : D'ADDARIO EXP high tension or SAVAREZ Cantiga Alliance

The most requested range of PRIMERA guitars is evolving. Because everyone has the right to the best and whatever their budget, PRODIPE GUITARS launches the PRIMERA EQ. Designed for musicians and their comfort, the new EQ model incorporates the same characteristics as the acoustic model: Spruce top, back and sides in Mahogany Fitted bone for the Nut and saddle Double carbon reinforcements inserted in the neck for an optimal comfort, a thinner handle, a better balance and a reduced weight. Because we build instruments with the needs of the musician in mind, the new PRIMERA EQ is built with a 48 mm width at nut, always more comfort and a simplified access for acoustic guitarists looking for nylon feelings. Always equipped with our preamp EC1 - PRODIPE, extremely powerful and easy to use, it is already a reference thanks to its respect of the acoustic sound of the guitar and its bluffing presence. The EC1 pre-amplifier was conceived for a single purpose: to give a very natural, balanced sound rich in harmonics.

With Prodipe, as per usual, it's all about the music and the musician. At unbeatable value for money, the Studio22+ USB audio interface faithfully carries on the Prodipe tradition.Whether you use it for recording, home studio work or live performances, at only €89, the Studio22+ is absolutely essential for music lovers, amateur musicians, and professional musicians.The new Prodipe Studio22+ is a first-rate audio interface for Mac and PC. It comes with a USB DAC (digital to analog converter) and the Prodipe driver, ASIO 2, for near-zero latency (less than 1 millisecond).Features:Equipped with combined XLR/Jack input, stereo USB input and output, stereo output for monitoring and separate headphone output.Included is a high-quality audio chipset for creating recordings that are ultra smooth and exceptionally warm.But the Studio22+ is also self-contained, so your mics, instruments, monitor speakers and headphones can all be plugged in directly.Specifications:Power LED  (green)Mac OS compatible (CoreAudio)Windows compatible (Prodipe ASIO 2.0)USB power (USB A to B cable supplied)External power supply possible: DC 5Volts/500mA (via USB: USB charger, smartphone charger, etc non supplied )3 pin XLR connector (IEC 60268 standard), pin 1: ground, pin 2: hot (+), and pin 3: cold (-)Power consumption: 2.5 Watts (max)Dimensions: (W x H x D) 109mm x 52mm x104 mmWeight: 0.5kg  

The Elipson RAIN speakers are the ideal solution to bring sound to your indoor and outdoor living areas without compromising on sound quality. This range of state-of-the-art speakers is suitable for any environment, no matter the weather conditions. The Elipson RAIN two-way speakers are veritable all-terrain models that are just as suited to intense cold or hot temperatures as they are to extreme humidity. These weatherproof speakers will be at home by the poolside, in the garden, in a sunroom or under a porch, but also in bars, restaurants, kitchens, spas or outdoor terraces. The RAIN speakers are meticulously assembled and come with an ultra-rigid, anti-UV case and a rustproof grill, all of which contribute to their extensive lifespan. Each RAIN model has an integrated wall mount system. Easy to install, this system provides a 180° dispersion angle, ensuring optimal sound quality that fills the entire area. Three sizes are available depending on the amount of power needed: the RAIN 4, RAIN 6 and RAIN 8 which feature a mid-bass driver of 4”, 6.5” and 7.9” respectively. The Elipson RAIN speakers are available in a white or black finish.   Specifications : Type 2-way outdoor speaker Power 150W Frequency Response (±3 dB) 70Hz - 20KHz Crossover frequency 3200 Hz Sensitivity 90 dB/1W/1m Impedance 8 Ohms Loudspeakers Tweeter : 1" Mid-bass : 8" Dimensions W244 x H355 x D230 mm Indice de protection IPX4 Température min -25°C Température max +70°C (25% humidity) Résistance à l'humidité +40°C under 95% Traitements Anti-rust, anti-UV

Versatile voice/instrument microphone for studio or for live situations, with a capsule large dual diaphragm (34 mm) with 1" diaphragm, a high pass filter and a 10 dB pad. With its smoothness and neutrality, it will let you achieve an extremely effective sound pickup.   The STC-3D MK2 by Ludovic Lanen - Sound Engineer "The reason I have become the sound engineer for all the top French singers is because I never compromise on the quality of my recordings and that is why PRODIPE wanted my expertise. I have chosen a new versatile voice/instrument microphone that you can use in the studio or in many live situations. I wanted it to be uni, omni and bi-directional, and to be equipped with a high pass filter and a 10 dB fade margin so that you have an immediate response in any situation. With its smoothness and neutrality, this new microphone will let you achieve an extremely effective sound pickup. It's one of the best microphones I have for every day use. But that's not all! I believe in PRODIPE because I know that this new brand has continually tried to cut out the middlemen and reduce manufacturing costs, without lowering the quality, so that previously unobtainable professional products could be made available to everyone. The Lanen model follows the same rule. A success. All my requirements are taken into account, this excellent product is available today thanks to PRODIPE. Yes to PRODIPE!"   Specifications: Microphone's range :Condenser microphones Studio / Live - Instrument microphones Kind of microphone : condenser Brand : Prodipe Alimentation : 48V DC Phantom Dimensions : Ø54 x 201mm Directivity : cardioid Impedance :  Load impedance :≥1000Ω Weight : 590g Sensitivity : -31dB/-34dB/-35dB±2dB(0dB=1V/Pa at 1kHz) Self noise : 14/15/16dB A Max. SPL input : 130dB (at 1kHz ≤1% T.H.D) - 140dB (with 10dB pad)  Low pass filter : 10 dB Width capsule : large dual diaphragm (34 mm) with 1" diaphragm Signal - noise : 80/79/78dB Frequency response : 20Hz-20kHz

The Elipson RAIN two-way speakers are veritable all-terrain models that are just as suited to intense cold or hot temperatures as they are to extreme humidity. These weatherproof speakers will be at home by the poolside, in the garden, in a sunroom or under a porch, but also in bars, restaurants, kitchens, spas or outdoor terraces. The RAIN speakers are meticulously assembled and come with an ultra-rigid, anti-UV case and a rustproof grill, all of which contribute to their extensive lifespan. Each RAIN model has an integrated wall mount system. Easy to install, this system provides a 180° dispersion angle, ensuring optimal sound quality that fills the entire area. Three sizes are available depending on the amount of power needed: the RAIN 4, RAIN 6 and RAIN 8 which feature a mid-bass driver of 4”, 6.5” and 7.9” respectively. The Elipson RAIN speakers are available in a white or black finish. Specifications:Type: 2-way outdoor speakerPower: 120WFrequency Response (±3 dB): 80Hz - 20KHzCrossover frequency: 3000 HzSensitivity: 89 dB/1W/1mImpedance: 8 OhmsLoudspeakers: Tweeter : 25 mm Mid-bass : 165 mmIndice de protection: IPX4Température min: -25°CTempérature max: +70°C (25% humidity)Résistance à l'humidité: +40°C under 95%Traitements: Anti-rust, anti-UV

Inspired Re-creation of a Legendary Small-diaphragm CondenserTheir acclaimed compressors and preamps have famously upset the pro audio price/performance ratio. When Warm Audio turned its attention to the granddaddy of small-diaphragm FET condenser microphones, you know it had to be good. And it is. Flash back to any top recording studio in the 1970s. You'll see the venerable '84 everywhere. Engineers who have worked with different generations of this perennial studio favorite know that the vintage ones have a warmer, more forgiving sonic character. It's these circuit designs — dating back nearly half a century — that Warm Audio closely followed for the WA-84. Stellar performance, top-shelf parts, and amazing value: that's the Warm formula — and the WA-84 nails it.Quality components make the Warm differenceWarm Audio doesn't cut corners on components, but they do order parts and build in quantity, which keeps costs down and delivers amazing value. Featuring a meticulously crafted vintage reproduction capsule, WA-84 is built with premium all-discrete components that include Fairchild transistors, Wima capacitors, and a CineMag USA transformer. Designed for professional commercial and home studios, live sound reinforcement, and broadcast applications, the WA-84 has the uncanny ability to finesse a wide range of sources, such as acoustic guitars, double bass, drums and percussion, piano, strings, brass and woodwinds, and more.What can the WA-84 do for you?Every studio needs at least one pair of high-quality small-diaphragm condenser mics, and the Warm Audio WA-84 is designed after a legendary one. With its versatile cardioid polar pattern and 10dB pad, you can use the WA-84 on any instrument — with world-class results. It makes snares and tom toms sound huge. It's great for drum overheads, capturing cymbals with warmth and vibrancy. It's perfect for adding a bit of room to complement a close dynamic or ribbon mic on a guitar cabinet. Engage the pad, and move the mic right up on the speaker grille.Double your value with a pair of these excellent micsThe WA-84 is an ideal choice for piano, vibraphone, marimba, congas, strings, woodwinds, and so much more. The list goes on, but suffice to say: You haven't lived until you've heard a grand piano spring to life when miked with a pair of WA-84s. For drum room mics, use two of them and nuke the stereo signal with a fast limiter. Positively explosive! Considering its amazing price, it would be wise to double your value and get (at least) two for recording tracks in stereo.Warm Audio WA-84 Small-diaphragm Condenser Microphone Features: Cardioid polar pattern Fully discrete signal path Vintage reproduction capsule CineMag USA Transformer 48V phantom powered Frequency Range: 20Hz–20kHz Sensitivity: -39dB or 11mV/Pa @ 1kHz Output Impedance: 200Ω Rated Load Impedance: ≥1kΩ Switchable Pad: -10dB Maximum SPL: 123/133dB @ 1kHz, 0.5% THD, 0/-10dB S/N Ratio: 78dBA (IEC651) Equivalent noise: 16dBA (IEC651) Dynamic range: 107dBA (IEC651) Connector: 3-pin gold-plated XLR Includes microphone, cardioid capsule, shockmount, mic clip, windscreen, carrying case A look inside the WA-84 The Capsule The WA-84 utilizes a custom vintage-style capsule designed to emulate classic componentry and design techniques. The WA-84’s capsule is carefully manufactured by an Australian capsule supplier and is precisely reproduced to vintage specs. We are pleased to offer such a high quality capsule in this microphone which allows us to nail the sonics of the most important component of any microphone. The Circuit The WA-84 is a fully discrete Class A design that utilizes a CineMag USA transformer, polystyrene and Wima capacitors and a Fairchild FET. The Transformer The WA-84 utilizes an American made CineMag USA transformer that contributes to the legendary creamy smooth top-end and the BEEFY mid to bottom-end one would hope to get from an 84-style small diaphragm condenser microphone. The Capacitors The WA-84 proudly utilizes Wima, polystyrene and tantalum through-hole capacitors throughout.

The ULN2 3D upgrade card is a user-installable internal expansion board for the Metric Halo ULN2 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology.3D replaces the ULN2’s built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI.The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integrationMain FeaturesPreloaded SPDIF/AES EdgebusUSB-C Connectivity2x GigE MH-Link ports75Ω BNC Word Clock I/OShips with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cableLegacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2PerformanceSupported Sample Rates: 44.1k — 192kMono Mix Busses:64Mono Mix Inputs:128Mix Crosspoints: 8192 (fully interpolated)VU Meters: 1024PPM Meters: 1024Peak Meters: 1024Router Crosspoints: 1024Point-To-Point Router Latency: 3 samples (< 16 µs)MH Link Total System Latency: 3 samples (< 16 µs)DSPDSP Memory: 1GBCores: 2I/OUSB: 1x USB-C port (Host & device capable)MH Link/Ethernet ports: 2x Gigabit Ethernet

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

The Elipson RAIN two-way speakers are veritable all-terrain models that are just as suited to intense cold or hot temperatures as they are to extreme humidity. These weatherproof speakers will be at home by the poolside, in the garden, in a sunroom or under a porch, but also in bars, restaurants, kitchens, spas or outdoor terraces. The RAIN speakers are meticulously assembled and come with an ultra-rigid, anti-UV case and a rustproof grill, all of which contribute to their extensive lifespan. Each RAIN model has an integrated wall mount system. Easy to install, this system provides a 180° dispersion angle, ensuring optimal sound quality that fills the entire area. Three sizes are available depending on the amount of power needed: the RAIN 4, RAIN 6 and RAIN 8 which feature a mid-bass driver of 4”, 6.5” and 7.9” respectively. The Elipson RAIN speakers are available in a white or black finish. Specifications:Type: 2-way outdoor speakerPower: 120WFrequency Response (±3 dB): 80Hz - 20KHzCrossover frequency: 3000 HzSensitivity: 89 dB/1W/1mImpedance: 8 OhmsLoudspeakers: Tweeter : 25 mm Mid-bass : 165 mmIndice de protection: IPX4Température min: -25°CTempérature max: +70°C (25% humidity)Résistance à l'humidité: +40°C under 95%Traitements: Anti-rust, anti-UV

Xone:96. The long-awaited follow-up to a genuine club classic. A new, uncompromising analogue DJ mixer, destined to be the heart of your creativity, Xone:96 takes the legendary soul of the acclaimed Xone:92 and redelivers it, enhanced, and with state-of-the-art digital connectivity.It’s all here. The huge, detailed, space-shaking analogue sound that only Xone delivers. A refined, precision 4-band EQ. Unrivalled dual Xone:VCF filters with CRUNCH harmonic distortion. And a dual 32-bit USB soundcard (24 Channels @ 96kHz) with Traktor Scratch certification right out of the box.Xone:96 lets you connect your whole rig, from laptops and turntables, to pedals, synths and drum machines.Two dedicated FX sends, four stereo input channels (with 4-Band EQ), two stereo input channels with all new 3-Band Parametric EQ + two auxiliary stereo return channels. And a separate master insert for your outboard hardware.Explore new possibilities with a familiar layout of beautifully tactile controls. And rely on the industrial build quality that exceeds the demands of relentless back-to-back performances, night after night.Specifications:Channels: 6 + 2EQ: Channel 1-4, 4-Band EQ / Channel A-B, 3-Band Parametric EQUSB Soundcards: Dual 24 Channel (12 in / 12 out) / Hi-Speed USB2.0 / Mac Class Compliant / 32bit / 96kHz / MIDI over USBLine Inputs: 4 x RCA (CH 1-4) 4 x 1/4? TRS (CH A-D) Mono/StereoPhono Inputs: 4 x RCA (CH 1-4) LN/PH Switch for DVSUSB Inputs: 6 x USB (CH 1-4 + CH A – CH B)Mic Input: 2 x XLRMaster Output: 1 x XLR (Balanced)Master 2 Output: 1 x 1/4? TRS (Balanced)Booth Output: 1 x 1/4? TRS (Balanced)Record Output: 1 x RCA (Un-balanced)Master Insert: 1 x 1/4? TRSMIDI Out: 1 x 5-Pin DINSend/Return I/O: 2 x 1/4? TRS Send / 4 x 1/4? TRS Return / 1 x LN/Hi-Z Switch (SND1/RTNA)Filter: 2 x VCF Filter / HPF, BPF, LPF / Adjustable Frequency & Resonance / Assignable CH 1-4 + CH A-B/ CRUNCH (Controlled Harmonic Signal Distortion) 

The Elipson Prestige Facet 8B speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor.The Prestige Facet 8B is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. Medium-sized, it is equipped with a 17 cm low midrange driver featuring a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion.A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The experts weren't wrong when they awarded the Elipson Prestige Facet 8B speaker with the Choc Classica and Diapason d'Or awards. A champion in its category!The Prestige Facet 8B's high sensitivity allows it to be paired with any amplifier with a power rating of 85 W or less per channel. Its lively performance make it an excellent surround sound speaker for a home cinema installation.   Specifications:Speaker: BookshelfNumber of way: 2Power: 85 W RMSTweeter: 1 "Mid-bass driver: 6,5 "Frequency Response (±3 dB): 47 Hz - 25 kHzSensitivity: 91 dB/1W/1mImpedance: 6 OhmsDimensions (W x H x D): 230 x 361 x 347 mmWeight with packaging, pair (W x H x D): 525 x 460 x 405 mmWeight with packaging, pair: 20,3 kg

As its name indicates, the  SD25 CEQ is quite simply the Cutaway Electric model of the SD25!Conceived on the same specifications, but with a cutaway, capsule and 3-band amplifier which respect the natural sound scrupulously.This model converts naturally into a very well made electro-acoustic guitar at a price which is, yet again, unbeatable.And for an exceptional sound quality, connect it to one of our Nattural 5 or Natural 6 amplifier. Specifications:Brand : Electro-acoustic guitar Prodipe GuitarsSeries : StarterModel : SD25 CEQ DreadnoughtTop : SpruceBack and sides : Indonesian mahoganyNeck : MahoganyNut and saddle : FittedFingerboard : Composite rosewoodFinition : Satin varnishTuning machine : Die-cast nickel-platedStrings : Bronze 12/54Electronic : EC 1 active 3-band pre-amp with tuner

Combining classic audio design with new technology Tangent's new premium radio Tuner ll provides easy and reliable access to many local and national radio stations thanks to its latest technology high quality tuner.  The FM analogue part of the tuner features RDS and is both clear and refined, whilst the digital DAB and DAB + tuners offer fast, locked-in reception of all available DAB + channels with stunning clarity.  The large white text LED display clearly provides the information you need whichever radio band and station you’re listening to. Hi-Fi sound quality from a mini radio The new Tuner ll fits effortlessly into Tangent's new mini system. By combining the Tangent Ampster BT II and CD ll, you can enjoy a complete, compact sized HI-FI system with premium audio quality and performance.  Each Tuner ll, Ampster BT ll and CD ll is less than the width of an A4 sheet of paper and is only 7cm high, making the system only 21cm high when stacked! So the small size of each component takes up less space in the living room, kitchen - or wherever you enjoy your music. A remote control for all The remote control for the Tuner II also operates the Ampster BT II and CD ll, so when all three components are stacked together or placed separately, each remote control can be used to operate all components.  Or you can choose to use only one remote control and put the two other remotes away!   Features FM/DAB/DAB+ Built-in power supply Alu Front Optical and analogue out

SOUND LIKE A LEGENDThe WA-251 was created to offer a classic microphone design to a new generation of recording artists at an affordable price. We spent a great deal of time listening to different ‘251 microphones to determine what people liked about them and why, how various styles of components impact the tone, and how to give the WA-251 microphone a signature that pays homage to the vintage classic, but also stands out on its own.The WA-251 is an all vacuum tube, large diaphragm, transformer balanced, multi-pattern, large condenser microphone, based on the classic ‘251 that has been used on countless hit records for the last 50+ years. The WA-251 is designed for pro studio, home studio, live, and broadcast applications and sounds great on vocals, acoustic/electric guitars, acoustic/electric bass, drums, piano, strings, brass/woodwind instruments, and an array of other sources. DESIGNThe classic ‘251 became extremely popular as a vocal microphone in the 1960’s and is now considered to be one of the greatest condenser microphones ever created. The classic ‘251 is still widely used today in professional recording studios but has become extremely rare and cost prohibitive to acquire.Designing our WA-251 to sound like the classic ‘251 was no easy task, especially since some of the vintage components are no longer manufactured or available. We are pleased to release such a gorgeous sounding classic to the market at a price that’s reachable to more people than ever before.SPECIFICATIONS CUSTOM WA-12-B-60V EDGE TERMINATED, DUAL-BACKPLATE, ALL-BRASS VINTAGE CK12-STYLE CAPSULE CINEMAG USA OUTPUT TRANSFORMER JJ SLOVAK 12AY7 VACUUM TUBE GOTHAM 5 METER GAC-7, 7-PIN TUBE MICROPHONE CABLE WIMA, SOLEN FRENCH, AND POLYSTYRENE CAPACITORS POLAR PATTERNS: 3 PATTERNS - CARDIOID, OMNI, FIGURE-OF-EIGHT FREQUENCY RANGE: 20 HZ~20 KHZ OUTPUT IMPEDANCE: 200 OHMS MAXIMUM SPL: 132DB (

It’s time to enjoy your CD collection again As part of Tangent’s new mini-system, the CD II plays an integral role when connected with the new Ampster II and Tuner II. Due to its mini, compact size you’ll now be able to play your CD collection on a player that’s both space saving and technology future-proof.  The CD II is a multi-format digital disk player that’s compatible with all current CD formats (including home-made MP3 files)… and with both digital optical and regular line-outputs, the CD II is designed to produce lossless connectivity to any separates HI-FI system. High quality CD sound from a mini player The new CD ll fits effortlessly into Tangent's new mini system. By combining the Tangent Ampster BT II and Tuner ll, you can enjoy a complete, compact sized HI-FI system with premium audio quality and performance.  Each CD ll, Ampster BT ll and Tuner ll is less than the width of an A4 sheet of paper and is only 7cm high, making the system only 21cm high when stacked! So the small size of each component takes up less space in the living room, kitchen - or wherever you enjoy your music. A remote control for all The remote control for the CD II also operates the Ampster BT II and Tuner ll, so when all three components are stacked together or placed separately, each remote control can be used to operate all components.  Or you can choose to use only one remote control and put the two other remotes away!   Features Optical digital out Analog RCA out Compact design Built-in power supply 

Beginners have essential special needs, which few manufacturers know how to satisfy.Thanks to the skill of its luthiers, Prodipe Guitars have created a model that is perfect for learning.From conception to manufacture, including selection of wood, setting the height of the strings and bridge, and profiling the neck, everything is designed to make learning easy.Because we know that these first guitars often get rough treatment (transported frequently, with or without a case, in all weathers, forgotten in the boot of a car parked in the sun, etc.), Prodipe Guitars' Primera models have a carbon insert in the neck that makes this guitar very light and resistant.Practically exclusive in this price range! Specifications:Brand : Classical Guitar PRODIPE GUITARSSeries : StarterModel : PrimeraTop : SpruceBack and sides : MahoganyBinding filets : Double ABSNeck : Mahogany with insert in carbonNut and saddle : Fitted boneFingerboard : Composite rosewoodFinition : Matt varnishTuning machine : Gilt, black knobsStrings : ALICE high tension