AD-DA Converters

8 line-levelanalog inputsAudioFuse X8 IN adds 8 premium line inputs to existing audio interfaces, allowing you to accommodate more instruments and outboard gear.With the latest generation AD converters up to 96 kHz sampling rate, enhance your studio flexibility and ensure your recordings maintain the highest fidelity.Capture multiple instrumentsConnect multiple synthesizers, drum machines, and other electronic instruments, allowing you to capture high quality recordings.Expand microphone captureConnect additional microphone preamps for recording vocals, drums, or multi-instrument ensembles, with each sound source having its own dedicated channelExternal audio processingRoute audio from your DAW to external processors like compressors, equalizers, and effects units, and then back into your DAW - enabling a hybrid mixing, setup.Be ready to recordHaving everything connected ensures you can quickly switch between different devices and be ready to record without any setup delays.More inputsmore controlEnhance your creative flow and have all your gear connected at once. AudioFuse X8 IN is the simplest way to extend the reach of your premium interface.8x analog inputs to ADATWord clock input on BNC24-bit latest generation AD converters up to 96 kHz sampling rateRobust half 1-U rack chassisAssembly kit included to rack two AudioFuse X8 units119 dBDynamic RangeAudioFuse X8 features lush dynamics that ensure every nuance of your recording or performance is captured.-112 dBHarmonic distortionDeliver the full essence of your audio output without introducing unwanted distortion, maintaining the true character of your sound.

Mastering D/A Converter Mercury is the first mastering DA-converter in 120V technology. It offers seven digital stereo input sources, all of which can be synchronized with each other or with a word clock. The additional variable output qualifies Mercury as a monitor controller. Seven Digital Sources Mercury provides connections for a total of seven digital stereo input sources.  For each digital source there is a dedicated and illuminated tactile switch for quick selection and quick comparison. The detected sample rate is shown in the display. One USB input and two coaxial, two optical and two AES/EBU inputs are available. AES input 2 also supports Dual-Wire (DW) mode. Sync The display shows the synchronization status and the detected sampling rate. Any source except USB can be synchronized to another source or to an external Word Clock. If the sync “Source” is selected in the display, each source uses its own sync code embedded in the signal. O dBfs Holding the Sync button for more than two seconds Mercury will change to the 0dBfs display. Mercury offers all reference levels in dBu corresponding to a 0 dBfs (full scale) digital signal: +14, +15, +16, +17, +18, +20, +22 and +24 dBu  Fix & Var The FIX OUT is an analog balanced stereo output which can be calibrated to all common reference levels (see 0 dBfs). Mercury offers a variable analog balanced stereo output. This output provides the same signal as the FIX OUT, but the level is continuously adjustable. Thus Mercury can also be used as a state-of-the-art monitor controller. Variable Output This analog potentiometer is used to control the level of the VAR OUT output. We use the ALPS RK27 “Big Blue” potentiometer with a nice “spoon in honey” feel and excellent channel tracking. So not only the auditory but also the haptic experience of volume control is at the highest level. Specifications: Analog inputs & output; XLR (balanced) Maximum input & output gain: 32.5 dBu Input impedance: 20 kΩ Output impedance: 75 Ω Common mode rejection: -82 dBu Frequency range (-3 dB): 4 Hz – 300 kHz Crosstalk (1 kHz): -108 dBu THD (0 dBu, 1 kHz): 0.000992 % Noise (A-weighted): -102.5 dBu Dynamic range: 135 dB Digital Inputs, DAC768 AES/EBU (XLR), PCM sample rates: 44.1/48/88.2/96/176.4/192 kHz Coaxial SPDIF (Cinch), PCM sample rates: 44.1/48/88.2/96/176.4/192 kHz Optisch SPDIF (Toslink F06), PCM sample rates: 44.1/48/88.2/96/with Glass fibre

Mastering D/A Converter Mercury is the first mastering DA-converter in 120V technology. It offers seven digital stereo input sources, all of which can be synchronized with each other or with a word clock. The additional variable output qualifies Mercury as a monitor controller. Seven Digital Sources Mercury provides connections for a total of seven digital stereo input sources.  For each digital source there is a dedicated and illuminated tactile switch for quick selection and quick comparison. The detected sample rate is shown in the display. One USB input and two coaxial, two optical and two AES/EBU inputs are available. AES input 2 also supports Dual-Wire (DW) mode. Sync The display shows the synchronization status and the detected sampling rate. Any source except USB can be synchronized to another source or to an external Word Clock. If the sync “Source” is selected in the display, each source uses its own sync code embedded in the signal. O dBfs Holding the Sync button for more than two seconds Mercury will change to the 0dBfs display. Mercury offers all reference levels in dBu corresponding to a 0 dBfs (full scale) digital signal: +14, +15, +16, +17, +18, +20, +22 and +24 dBu  Fix & Var The FIX OUT is an analog balanced stereo output which can be calibrated to all common reference levels (see 0 dBfs). Mercury offers a variable analog balanced stereo output. This output provides the same signal as the FIX OUT, but the level is continuously adjustable. Thus Mercury can also be used as a state-of-the-art monitor controller. Variable Output This analog potentiometer is used to control the level of the VAR OUT output. We use the ALPS RK27 “Big Blue” potentiometer with a nice “spoon in honey” feel and excellent channel tracking. So not only the auditory but also the haptic experience of volume control is at the highest level. Specifications: Analog inputs & output; XLR (balanced) Maximum input & output gain: 32.5 dBu Input impedance: 20 kΩ Output impedance: 75 Ω Common mode rejection: -82 dBu Frequency range (-3 dB): 4 Hz – 300 kHz Crosstalk (1 kHz): -108 dBu THD (0 dBu, 1 kHz): 0.000992 % Noise (A-weighted): -102.5 dBu Dynamic range: 135 dB Digital Inputs, DAC768 AES/EBU (XLR), PCM sample rates: 44.1/48/88.2/96/176.4/192 kHz Coaxial SPDIF (Cinch), PCM sample rates: 44.1/48/88.2/96/176.4/192 kHz Optisch SPDIF (Toslink F06), PCM sample rates: 44.1/48/88.2/96/with Glass fibre

16+16 channel AD/DA converter and MADI interface Madison offers what hardly any other manufacturer in this price segment has to offer: 16 AD/DA converters. With SmartMADI and the Madicon this becomes an expandable multi-channel studio interface of the first order. MADI transmission distance up to 2 km MADI I/O latency: 1 sample Optical MADI socket, type SC 56 & 64 channel Hi/Lo modes accepts Varispeed up to +/-12,5% Sync to MADI, Wordclock or Internal Device ID for daisy chaining 16 AD and 16 DA converters 24 bit / up to 192 kHz Level lights per channel in easily readable blocks of four OdBfs: 15, 18, 22 or 24 dBu Fanless and therefore particularly suitable for noise-sensitive environments Optional redundant power supply unit Madison together with the Madicon support SmartMADI MADI becomes more user-friendly, simple and modern SPL’s Madicon and Madisons can now be connected in series (daisy chaining) like Audio-Over-IP devices, and are easier to configure and more reliable. An additional MADI router for more than two MADI devices is not required The sample rate is now transmitted via the MADI stream and Madisons follow automatically – very handy Specifications: Analoge Input & Outputs; DB25 (balanced) Maximum input & output gain: 24 dBu Input impedance: 20 kΩ Output impedance: 75 Ω Common mode rejection (1 kHz): 82 dB Crosstalk (1 kHz, 48 kHz SR): -110 dB Dynamic Range (A-weighted, 48 kHz SR): 115 dB Digital I/O; MADI-Port MADI optical, Type SC: 44.1/48/88.2/96/176.4/192 kHz Varispeed: ±12.5% in 56 CH mode, -12.5% in 64 CH mode Reference Levels: 15dBu, 18dBu, 22dBu, 24 dBu Wordclock input, BNC, terminated impedance: 75 Ω Wordclock Level (Input TTL/CMOS5/CMOS3): 3.3 V S/N (A-bewertet, 48kHz SR): -115 dBFS S/(N+D) (-1 dBfs, 48kHz SR): -102 dBFS Passband response (-0.02dB, 48kHz SR): 22 kHz Passband Ripple (Decimation-LPF, 48kHz SR): +/- 0.005 dB Stopband Attenuation (Decimation-LPF, 48kHz SR): 100 dB Crosstalk (1 kHz, 48kHz SR): -110 dBu Internal Linear Power Supply with Shielded Toroidal Transformer Operating voltage for analog audio: +/- 17 V Operating voltage for digital audio: +12 V, +5 V BTU (British Thermal Units, typical): 65 BTU/h BTU (British Thermal Units, max): 110 BTU/h Mains Power Supply Mains voltage: 90 – 264 V AC, 50/60 Hz Hz Power consumption: max. 35 W Dimensions & Weight W x H x D (width x height x depth): 482 x 44 x 260 mm Unit weight: 3.05 kg Shipping weight (incl. packaging): 5 kg

USB / MADI Interface Madicon is a MADI digital audio interface that connects up to 64 input and 64 output channels to the computer via USB. USB Audio Interface Maximum 64 input and 64 output channels via MADI Additional optical stereo output (Ch1/2) 24 bit / up to 192 kHz Hi-Speed USB with detector LED USB bus powered Internal/External Clock Switch External Clock Lock LED Windows & Mac Zero-latency monitoring (FPGA Monitoring Mixer) SmartMADI MADI becomes more user-friendly, simple and modern SPL’s Madicon and Madisons can now be connected in series (daisy chaining) like Audio-Over-IP devices, and are easier to configure and more reliable. An additional MADI Router for more than two MADI devices is not necessary The sample rate is now transmitted via the MADI stream and Madisons follow automatically – very handy Monitor Mixer Control Room Mixer and six additional individual headphone mixers Intuitive and fast workflow Talkback 128-channel MADI stream metering MADI splitter – one signal can be distributed to 63 other channels Record without a DAW – directly to the hard disk! Automatic arming Displaying the remaining recording time Automatic naming of the files Solo auditions MADI Train & Device IDs This drawing explains the device ID settings when up to four Madison with SmartMADI are connected to the Madicon and a DAW in a daisy-chain connection at single, double and quadruple sample rates. Specifications: Inputs & outputs; MADI, USB, Toslink Optical MADI port: Standard 64/High Optical Toslink port (F06): Max. 192 kHz USB 2.0 High Speed, Bus-Powered, Power consumption (max): 2.5 W Dimensions & Weight W x H x D (width x height x depth): 100 x 42 x 108 mm Unit weight: 0.2 kg Shipping weight (incl. packaging): 0.45 kg

8-Channel ADAT card 2 x ADAT In and 2 x ADAT Out Supports 8 channels with 24-bit / 44.1 to 96 kHz and 4 channels with 176.4 to 192 kHz For MAC OSX and Windows drivers

8X192 AD/DA is a hi-performance mastering quality converter which offers PCM A/D and D/A conversion for all sampling rates from 44.1k to 192k. Optional DSD firmware provides DSD (standard 64x) and hi-speed 128x DSD.Additionally to analog-digital-analog conversion 8X192 features the following:Digital format conversion between AES and any of two optional DIO Cards installedTrue precision mastering grade 1dB per step stepped attenuatorAnalog mix buss assignable to 4 pairs of stereo channels or 8 mono channelsAdditional to 8 analog outputs, 2 XLR outputs which can be assigned to any pair of channels or Mix Buss outputHi-current (500mA), hi-speed, low distortion transparent headphone amplifierOrder one Mytek 8X192 AD/DA converter and get for  FREE one of the following interfaces ADAT, USB2 , FIREWIRE, PRO TOOLS

Lynx Studio Technology is proud to present the Hilo Reference A/D D/A Converter System. With the pristine, open, transparent audio quality for which Lynx is known, Hilo (pronounced HE-low) provides two channels of mastering quality analog to digital conversion, up to eight channels of digital to analog conversion, a secondary monitor output, and a world class independent headphone amplifier in a compact half-rack size. A first for the two-channel pro converter market, Hilo’s innovative 480 x 272 touchscreen provides a flexible and intuitive interface that can adapt to a particular application and be easily upgraded with enhancements and new features. Initial front panel controls support extensive signal routing and mixing, sample rate selection, clock source options, levels, metering and diagnostic features.Hilo completely redefines and evolves the category of the two channel converter. Of utmost importance is the audio signal quality. The completely new design of the analog stages and converter topology for Hilo break new ground in terms of lowering distortion and noise while maintaining transparency for A/D and D/A conversion. Beyond that, Hilo offers extensive I/O capabilities and utilizes the latest FPGA technology with vast resources for control, routing, and signal processing capabilities. Also in development are diagnostic and analysis tools for Hilo. The LCD screen is a natural interface for these functions.The digital or analog inputs can be routed to three separate outputs, Line Output (with 8 trim settings), Monitor Output, and Headphone Output. Each of these output pairs has its own dedicated DACs, allowing each to offer a unique mix. The Monitor and Headphone Outputs have volume controls, accessible via faders on the touchscreen or the single knob on the front (offering control in ½ dB increments). Another innovation, the Headphone section has its own dedicated D/A converter. This supports the creation of 32-channel headphone mixes independent of the main and monitor outputs, as well as providing specifications that rival those of dedicated headphone amps costing $1500 and more.The digital section offers a wide range of inputs. AES/EBU inputs and outputs have transformer isolated balanced XLR connectors. SPDIF input and output are available via transformer-coupled coax or optical (TOSLINK) connections. The Optical ports can also be used for up to eight ADAT channels. The ADAT input and output channels are completely independent from the AES/EBU or S/PDIF coax channels. The Lynx LT-USB LSlot accessory is also included, for computer connectivity. Lynx’s low jitter SynchroLock word clock is also included, with Word Clock in and out connections available.In total, Hilo has 12 total inputs, 16 total outputs plus 32 channels possible via its LSlot port. The unit’s FPGA powers its internal 32 channel mixer, which allows Hilo to offer the most versatile I/O and routing in the two channel converter genre. This is just the beginning of the innovation.In contrast to the concentrated and intricate back panel, Hilo’s front panel is elegant in its simplicity. It has a power switch, headphone jack, multipurpose control and a 480 x 272 pixel high resolution LCD touchscreen. This high-resolution screen does a lot more than simply replace the buttons on the front panel of most other converters. Of course it handles the basic settings and routing functions, clocking and level settings.A second meter screen shows just two larger bar-graph style stereo bar meters. Any input or output set can be assigned to each meter. In addition to bar-graph meters common on most converters, Hilo’s touchscreen is able to show more traditional metering types, such as old style VU meters. Also in development are diagnostic screens, such as real time analyzer, phase meter and loudness meter. As with all other Lynx products, Hilo is FPGA based, meaning new features, capabilities and graphics can be added at any time with a simple download.

New Manhattan DAC II features include: World's highest performance 130dB Sabre 9038 DAC chipset. 32 bit integer Class 2 USB2 driverless audio interface World class transparent analog preamp attenuators Roon Ready optional network card MQA ® hardware decoder  Improved optional phono preamplifier card  New, easy to navigate menu system The Manhattan DAC II design uses the same chassis, same power supply, and front panel circuits as the original Manhattan. It uses a completely new, redesigned main board. This offers a substantial sound quality upgrade. Significantly better detail and resolution, and state of the art transparent analog preamplifier performance.Existing Manhattan DAC I owners are eligible for Manhattan DAC II upgrade. Original Manhattan owners are encouraged to upgrade to Manhattan DAC II for a very reasonable upgrade fee. Upgrade includes replacement of the motherboard and will be performed in the US by Mytek Brooklyn office, in Europe, by Mytek Warsaw office and overseas by authorized Mytek dealer. Femto Clock TechnologyMytek's new Femto Clock that's incorporated into our C777 Clocking architecture pushes jitter and the noise floor below measurable levels. Highest Resolution SupportModern high resolution audio formats support for PCM 32 bit 384 kHz DXD to Quad DSD256 11.2 MHz. Discrete Analog & Digital Power SuppliesTwo separate isolated power supplies for the analog and digital stages that lower noise and crosstalk while increasing power and consistency. SPECIFICATIONS CONVERSION: PCM up to 384k, 32bit, MQA ®, native DSD up to DSD256, DXD, 130dB Dynamic Range.MQA Hi-Res DECODER: built in certified hardware MQA ® decoderDIGITAL INPUTS: USB2 Class2 (OSX, Linux driverless, all formats), AES/EBU (PCM up to 384k, up to DSD128 DOP), 3x S/PDIF (PCM up to 192k, up to DSD128 DoP), Toslink, SDIF3 DSD up to DSD256ANALOG INPUTS: RCA Line In switchable to Phono with Optional Phono Card insterted, second pair of RCA Line In, third pair XLR Balanced Line In. Analog inputs are router through minimalpath state of the art analog attenuator directly to analog and headphone outputs.ANALOG OUTPUTS: RCA, balanced XLR, simultaneous, 50 Ohm impedanceHEADPHONE OUTPUTS: Reference High Current, High transient Headphone Amp, 500mA, 6 Watts, 0 Ohm out impedance. Dual headphone jacks, designed to drive demanding headphones. Balanced operation w/optional Mytek adapter.BUILT-IN ATTENUATOR: Choice of 1dB step analog attenuator for main out and headphones, 1dB step digital 32bit attenuator or purist relay bypass.CLOCK: “Mytek Femtoclock Generator (tm)” 0.82ps internal jitter, Wordclock Input and Output (allows stacking multiple units for multichannel operation, includes mch DSD)AUDIO RECORDING FUNCTION FOR DIGITAL SOURCES: All digital inputs can be routed into computer via USB2. Allows connection of external digital sources such as CD Players and digitizing ADCs.REMOTE: Included, universal remote capableFIRMWARE: Upgradable via USB Control Panel App (Win and Mac)OPTIONAL PRECISION PHONO ANALOG PREAMP CARDHigh End M/M, M/C Phono Preamplifier with custom nickel core step up transformer , relay switchable and tunable. Input impedances, transformer ratio, RIAA curves and choice of gain can be changed within the menu or using the remote via relay switches. Optional card is sold separately and is user installable.OPTIONAL "ROON READY" NETWORK CARD: Turns the Manhattan II into network streamer with 24/192k and DSD64 maximum throughput. Compatible w/ Roon, DLNA/UpnPPOWER SUPPLY: Switchable 115/230VAC (100V Japanese version available)DIMENSIONS: WxDxH=17"x10.5"x1.95"=432x267x50mmWEIGHT: 16lbs, 8kgWARRANTY: 2 years    

Designed and manufactured in the United Kingdom, CALLIA embodies the Prism Sound uncompromising approach to audio resulting in the most accurate and detailed DAC available. Callia reveals the most minute nuance of any performance and is flexible in the face of a variety of genres. Hear your music the way it was intended. PRISTINE SOUND QUALITY Callia makes no compromises on audio quality, ensuring you’ll experience music at home exactly as it was experienced by those who created it in the studio. Our heritage and unrivaled experience has allowed for the creation of a DAC of unparalleled sonic clarity. HEADPHONE OUTPUT CALLIA’s headphone output boasts a high-current, low impedance design optimized for the best possible performance. Able to power a wide range of high end headphones, CALLIA will adjust and match the impedance of your headphones for an unbeatable listening experience. SIMPLIFIED CONNECTIVITY Callia is compatible with the widest range of computer hardware using a USB2 interface supporting UAC2 audio. Auto input detection and output protection allows for the hot plugging of cables without fear of damaging your speakers. UNSURPASSED CLOCKING AND JITTER REJECTION Prism Sounds long history in developing test and measurement equipment for the audio industry has provided Callia with the pinnacle of ultra-stable clocks, ensuring the most accurate and detailed conversion available. AUDIO FORMATS CALLIA supports linear PCM in 2’s complement binary coding and, using the “DSD over PCM” (DOP) protocol, DSD at the original bit-rate (DSD64) and also at 2 x the original rate (DSD128). DSD Files encoded as “DOP” may be played with both ASIO and WDM drivers. Your computer, tablet or transport will commonly decode formats such as mp3 to PCM prior to transmission to the sound card, so these formats will typically be supported on your device in the same manner as they would be with another sound card. On the S/P-DIF inputs, DOP can also be used, but only at the original DSD bit rate (DSD64) as these connections do not have enough bandwidth for DSD128. The ASIO native DSD format is not currently supported. Specifications: Dimensions: Table-top (including feet): 285 x 242 x 50mm Power: 90VAC – 250VAC, 50 – 60Hz 15W consumption 0.5A(T), 20mm, glass Inputs: 1 x USB Audio Device Class 2.0 1 x TOSLINK for S/PDIF 1 x RCA for AES3-ID Outputs: 2 x XLR (balanced) 2 x RCA (pseudo-balanced)

THUNDERBOLT™ 3 & USB INTERFACE WITH 12 DISCRETE PREAMPS AND 6DSP + 2FPGA FX PROCESSORS Synergy Core FX free up CPU to improve system stability, letting you reduce buffer size to record & monitor with sub-millisecond latency 2x FPGA units handle all audio mixing, dynamics processing, equalization and reverb with effects modeling legendary studio gear 6x ARM-based DSPs bring a wider variety of creative effects to an efficient, low-latency platform No latency stacking when chaining multiple effects 6x DSP + 2x FPGA The FX Processing Beast The new Orion Studio brings our recently pioneered Synergy Core FX processing platform to its next stage of evolution. With two proprietary Field Programmable Gate Aray (FPGA) chips and a whopping six ARM-based DSP processors on board, the sheer computing power contained in this interface is astounding! Leave CPU upgrades aside and let Synergy Core do the number-crunching. 6x DSP + 2x FPGA chips let the Orion Studio Synergy Core handle up to 32 FX channel strips X 8 FX slots each for a maximum of 256 FX instances, at any sample rate and over AFX2DAW. That's four times the processing power of the Orion Studio Rev. 2017. REAL-TIME LIVE MONITORING Auto-Tune Synergy Built from the ground-up for the Synergy Core platform, Auto-Tune Synergy adds live pitch correction to the Antelope Audio experience. Industry-leading pitch correction anytime you need it – live, during recording, and at mixdown Fully adjustable Retune Speed, Flex-Tune, and Humanize parameters with Auto-Key automatic key and scale detection Real-time, low latency performance with the Edge Go modeling microphone and any Antelope Audio Synergy Core interface ‘Classic’ mode pays homage to the legendary “Auto-Tune 5 sound” heard on countless hit record EXPANDABLE FX LIBRARY 50 Synergy Core FX Included Adding further value to your investment, the Оrion Studio Synergy Core includes a compelling library of 50 real-time studio effects, meticulously modelled after their hardware originals. It’s all happening inside your audio interface with the lowest latency possible thanks to FPGA’s massive parallel computing capabilities, DSP processing, and fast Thunderbolt™ connectivity. The library can be expanded to include any effects you choose from our web store. Thunderbolt 3 Certified & USB Compatible Thunderbolt 3 is the fastest, most versatile data connection available now. Orion Studio Synergy Core underwent a rigorious certification process to ensure operating system compatibility and stability. Not up to speed with Thunderbolt 3? Worry not, the interface is backwards-compatible with Thunderbolt 2, and we also left the USB 2.0 port intact – it’s right where you’d expect it to be. This way, the Orion Studio Synergy Core works with any DAW, on any modern Windows or macOS computer. FULL SPEED AHEAD Forget Latency Record and monitor with maxed-out effects chains at high sample rates and low buffer sizes without taxing your CPU! You can enjoy Latency-Free Direct Monitoring over 4 independent internal mixers with 32 assignable inputs and stereo outputs.   MORE THAN YOU EXPECT 12 Discrete Preamps The outcome of a long, hard look into iconic microphone preamp circuitry, our discrete transistor pres honor the finest audio engineering practices while sounding absolutely exceptional. They also bring out the best in our Edge & Verge modeling condenser microphones, for vocal and instrument recording that truly keeps up with the times. HEAR THE TRUTH Go Direct All Orion Studio Synergy Core analog inputs have the Direct-In feature to let you bypass preamp controls and record line-in signals directly into the converters. Get ready to hear the truth! COMPREHENSIVE I/O Immense Analog & Digital Flexibility There’s no task too big or too small for the Orion Studio Synergy Core. Record high-impedance instruments, such as the electric guitar, through four Hi-Z inputs and reamp DI tracks through the special purpose ReAmp outputs. Take advantage of all 16 line outputs (on DB25 connectors). Handle digital audio via S/PDIF and ADAT. Freely route all incoming and outgoing audio from an intuitive software Routing Matrix. Then hear the result from two pairs of headphones or studio monitors – simultaneously, if you need to. TOTAL CONTROL Any Audio Anywhere The Software Control Panel is the “mediator” between the Orion Studio Synergy Core and your DAW. Handle gain adjustments, signal routing, effects processing, mixing and metering from a single window. Route the resulting audio into your DAW for recording in formats of your choice, such as multi-track, stem, and two-channel stereo. Gone DAW-less? Route any audio to any output and take it to the recording medium of your choice. • IMMEDIATE ACCESS TO ANY PARAMETER • COLOR-CODED ROUTING MATRIX WITH USER LABELS AND UNDO/REDO FUNCTIONS • FOUR 32-CHANNEL, LOW-LATENCY SOFTWARE MIXERS • SAVE AND LOAD CUSTOM PRESETS • SINGLE-WINDOW WORKFLOW BEST-IN-CLASS AD/DA 130 DB Dynamic Range With an array of 12 audiophile-grade DACs, capable of up to 192kHz sample rates and 130dB dynamic range conversion* each, Orion Studio Synergy Core is an AD/DA powerhouse! Capture your voice, instruments or mixing desk outputs exactly as they sound, with immaculate precision that’s as flawless as it’s unforgiving. * Measured at the monitor outputs. D/A CONVERTER DYNAMIC RANGE: 128 DB THD + N: -115 DB D/A MONITOR CONVERTER DYNAMIC RANGE: 130 DB THD + N: -115 DB A/D CONVERTER DYNAMIC RANGE: 124 DB THD + N: -112 DB ACCUSONIC 3D MODELING Mic Modeling Ready The Orion Studio Synergy Core’s Accusonic 3D modeling engine lets you transform the Antelope Audio Edge and Verge modeling microphones into expensive-sounding vintage replicas. Shape the final sound with complete control over proximity effect and change polar patterns during or after recording. Choose from a collection of classic and rare microphones as you monitor and record live, bringing out the musician’s finest performance.   *Available with Antelope Audio Edge & Verge modeling microphones OVEN-CONTROLLED CRYSTAL OSCILLATOR 64-bit Acoustically Focused Clocking The pioneer of atomic clocking in pro audio, Antelope Audio incorporates 20+ years of expertise in its audio interfaces. Our proprietary 64-bit Acoustically Focused Clocking jitter management algorithm helps deliver the kind of artifact-free audio once accessible only to the most prestigious studios. Furthermore, with the Word Clock outputs, you can distribute this highly stable clock signal across the rest of your digital gear to have everything running in smooth sync! Increased width, separation, and detail in musical performances Very low frequency drift due to temperature and other parameter changes Taking advantage of high-speed Thunderbolt, the AFX2DAW * plug-in lets you use Synergy Core effects as inserts inside your chosen DAW. This simplifies workflow and enables easy, immediate effects automation. *Available as a separate purchase for Mac Thunderbolt. HAND-BUILT IN EUROPE Sturdy and Sleek Housed in a machined aluminum chassis, each unit is hand-built in our European facility to strict standards, component choices and quality control. This kind of attention to detail is typically reserved only for boutique-class products. Orion Studio Synergy Core THUNDERBOLT 3 & USB INTERFACE WITH 12 DISCRETE PREAMPS AND SYNERGY CORE FX

New Manhattan DAC II features include:World's highest performance 130dB Sabre 9038 DAC chipset.32 bit integer Class 2 USB2 driverless audio interfaceWorld class transparent analog preamp attenuatorsRoon Ready optional network cardMQA ® hardware decoder Improved optional phono preamplifier card New, easy to navigate menu system     The Manhattan DAC II design uses the same chassis, same power supply, and front panel circuits as the original Manhattan. It uses a completely new, redesigned main board. This offers a substantial sound quality upgrade. Significantly better detail and resolution, and state of the art transparent analog preamplifier performance.Existing Manhattan DAC I owners are eligible for Manhattan DAC II upgrade.Original Manhattan owners are encouraged to upgrade to Manhattan DAC II for a very reasonable upgrade fee. Upgrade includes replacement of the motherboard and will be performed in the US by Mytek Brooklyn office, in Europe, by Mytek Warsaw office and overseas by authorized Mytek dealer.Femto Clock TechnologyMytek's new Femto Clock that's incorporated into our C777 Clocking architecture pushes jitter and the noise floor below measurable levels.Highest Resolution SupportModern high resolution audio formats support for PCM 32 bit 384 kHz DXD to Quad DSD256 11.2 MHz.Discrete Analog & Digital Power SuppliesTwo separate isolated power supplies for the analog and digital stages that lower noise and crosstalk while increasing power and consistency.SPECIFICATIONSCONVERSION: PCM up to 384k, 32bit, MQA ®, native DSD up to DSD256, DXD, 130dB Dynamic Range.MQA Hi-Res DECODER: built in certified hardware MQA ® decoderDIGITAL INPUTS: USB2 Class2 (OSX, Linux driverless, all formats), AES/EBU (PCM up to 384k, up to DSD128 DOP), 3x S/PDIF (PCM up to 192k, up to DSD128 DoP), Toslink, SDIF3 DSD up to DSD256ANALOG INPUTS: RCA Line In switchable to Phono with Optional Phono Card insterted, second pair of RCA Line In, third pair XLR Balanced Line In. Analog inputs are router through minimalpath state of the art analog attenuator directly to analog and headphone outputs.ANALOG OUTPUTS: RCA, balanced XLR, simultaneous, 50 Ohm impedanceHEADPHONE OUTPUTS: Reference High Current, High transient Headphone Amp, 500mA, 6 Watts, 0 Ohm out impedance. Dual headphone jacks, designed to drive demanding headphones. Balanced operation w/optional Mytek adapter.BUILT-IN ATTENUATOR: Choice of 1dB step analog attenuator for main out and headphones, 1dB step digital 32bit attenuator or purist relay bypass.CLOCK: “Mytek Femtoclock Generator (tm)” 0.82ps internal jitter, Wordclock Input and Output (allows stacking multiple units for multichannel operation, includes mch DSD)AUDIO RECORDING FUNCTION FOR DIGITAL SOURCES: All digital inputs can be routed into computer via USB2. Allows connection of external digital sources such as CD Players and digitizing ADCs.REMOTE: Included, universal remote capableFIRMWARE: Upgradable via USB Control Panel App (Win and Mac)OPTIONAL PRECISION PHONO ANALOG PREAMP CARDHigh End M/M, M/C Phono Preamplifier with custom nickel core step up transformer , relay switchable and tunable. Input impedances, transformer ratio, RIAA curves and choice of gain can be changed within the menu or using the remote via relay switches. Optional card is sold separately and is user installable.OPTIONAL "ROON READY" NETWORK CARD: Turns the Manhattan II into network streamer with 24/192k and DSD64 maximum throughput. Compatible w/ Roon, DLNA/UpnPPOWER SUPPLY: Switchable 115/230VAC (100V Japanese version available)DIMENSIONS: WxDxH=17"x10.5"x1.95"=432x267x50mmWEIGHT: 16lbs, 8kgWARRANTY: 2 years  

8X192 AD/DA is a hi-performance mastering quality converter which offers PCM A/D and D/A conversion for all sampling rates from 44.1k to 192k. Optional DSD firmware provides DSD (standard 64x) and hi-speed 128x DSD.Additionally to analog-digital-analog conversion 8X192 features the following:Digital format conversion between AES and any of two optional DIO Cards installedTrue precision mastering grade 1dB per step stepped attenuatorAnalog mix buss assignable to 4 pairs of stereo channels or 8 mono channelsAdditional to 8 analog outputs, 2 XLR outputs which can be assigned to any pair of channels or Mix Buss outputHi-current (500mA), hi-speed, low distortion transparent headphone amplifierOrder one Mytek 8X192 AD/DA converter and get for  FREE one of the following interfaces ADAT, USB2 , FIREWIRE, PRO TOOLS

Dangerous has been building award-winning, standard-setting converters since 2002 when the Dangerous Monitor’s onboard digital-to-analog converter (DAC) swiftly became the industry reference. We’ve been asked over the years to build a stand alone DAC, and they’re finally here in the Convert series. Eager to embrace the opportunity to develop a new and better DAC, we designed the Convert series converters from the ground up, utilizing cutting-edge digital technology coupled to a Chris Muth designed analog circuit that delivers our signature sound: open, articulate and powerful from top to bottom. Loaded with innovative and useful features accessed from an intuitive front panel, the Convert-2 tops an elite class of dedicated stereo digital-to-analog converters in both sound and ease of use. The Convert-2 goes beyond transparency – you won't just hear everything, you’ll hear it beautifully.Specifications:Signal to Noise Ratio A-weighted, 20Hz to 20KHz: < 114dBSignal to Noise Ratio unweighted, 20Hz to 20KHz: < 113dBDynamic Range A-weighted, 20Hz to 20KHz: < 114dBDynamic Range unweighted, 20Hz to 20KHz: < 113dBJitter: 16ps (100Hz to 40KHz), 18ps (100Hz to 1MHz)Crosstalk rejection: > 114dBu  1kHzReplacement Fuses: USA 2 amp slo-blow for 120V Europe 1 amp slo-blow for 240VTHD+N:THD+N, 1kHz, unweighted, 20Hz to 20kHz, +4dBu out: < 94.5dB (0.00188%)THD+N, 1kHz, unweighted, 20Hz to 20kHz, +22dBu out: < 106.5dB (0.00048%)Frequency Response  96KHz sample rate:DC to 20KHz: +0, -0.25dBDC to 30KHz: +0, -0.5dBDC to 40KHz: +0, -1.0dB

If you thought analog-to-digital converter innovation had taken a snooze, Dangerous Music is about to wake you up with five game-changing innovations. Packed into a single rack space with our next-generation conversion for the ultimate in musicality and transparency, the CONVERT-AD+ is the most advanced stereo analog-to-digital converter on the market. The CONVERT-AD+ has no fewer than five—five!—features previously never seen on an analog-to-digital converter before. Smart, useful, well-executed innovations put Dangerous Music on the map, and we continue that tradition into the 21st century with the CONVERT-AD+.Simple, elegant, intelligent. With the push of a button, you can switch between any two balanced line input sources. With zero fuss, you can instantly compare different mastering chains, test your mix against a reference, or to switch between recording and mixing mode—or use the inputs in any configuration you dream up. From the largest mix rooms, to elite mastering suites, to your home studio, the switchable inputs on the CONVERT-AD+ is about to make everyone’s life a lot easier.Do you dig pushing the A/D beyond 0 dBFS, into clipping, for specific sonics? Clip Guard will turn off the red light LED at your destination (i.e. DAW). Red indicates clipping on most meters, in actuality, the over indicator in the AD+ turns from green to yellow. Now “Mastered for iTunes” or the CD pressing plant will not reject your opus, since these red light overs will not appear. This is not a limiter. If you can hear clipping and engage clip guard, it will sound identical. It simply disables the clip LED in your DAW or destination device, but you will still be audibly clipping.Previously an oxymoron, musical transparency makes perfect sense now that Dangerous Music has pushed its products to the bleeding edge of today’s technology. We deliver an open, full-bodied sound free of unwanted artifacts (transparency) with a bold and big three-dimensional sound (musicality). The result is sound that you can trust and love.Among those who truly understand this hotly debated area of audio technology, the mantra with digital is implementation, implementation, implementation. How components are selected, tweaked and assembled according to a specific design, and then tuned for superior performance within that plan, is what sets a converter apart – for better or worse. The Dangerous Music CONVERT-AD+ has been developed by a team of experts with deep, up-to-the-minute knowledge of the best digital and analog converter technology available today. Our implementation has even managed to get the clock working better than it’s stated specs.JET is a patented clocking technology that Dangerous Music employs in order to reduce jitter to the point where it simply isn’t a factor impacting the sound of our converters. Whenever zeros and ones are flying by at incredible speeds, a solid clock and balanced data stream management system is of the utmost importance to articulate, musical, 3D impact. Do not shy away from using the CONVERT-AD+ as your studio’s master clock, a choice more and more engineers are making since becoming “converts.”Features:Selectable Calibration Level cycles through three calibration levels for compatibility with other devicesToggle between two discrete, selectable stereo inputs with two switchable stereo input pathsClip Guard will turn off the red light LED at your destination (i.e. DAW)Premium custom crafted digital meter with Normal and Peak Hold modes provides precise visual feedbackZoom view lets you view only the top 10dB of your signal level, for a finer, magnified resolutionWord Clock with three Modes: Internal, External and MasterX-FORMER insert button engages some of Chris Muth’s sonic wizardry via a pair of customized HAMMOND™ transformersEMPHASIS shelving EQ/Compressor induces 2nd order harmonic distortion to blend in a bit of mid warmth and sparkleUSB connection for Mac/PC 

The Bricasti Design M1 USB digital to analog converter is a dual mono design; there are 2 completely isolated channels, a left and right, each with its own dedicated linear power supply, D/A converter, DDS clocking, and analog circuitry. This design insures that analog cross talk is virtually non existent, that the necessary power requirements for each channel are well met and isolated from each other and the digital processing is isolated, having its own power supply. With our twin DAC design, the dynamic range for each channel is optimized by using the stereo ADI 1955 D/A converter in a mono configuration, plus clocking is for each channel done directly at each DAC with a technique called DDS (direct digital synthesis) which takes clock induced jitter to immeasurable levels.Build QualityThe M1 is robustly constructed of milled and CNC machined aluminum sections. There is no typical bent metal chassis and top cover found on most products. All sections of the construction, the front and rear panels, the sides and even the bottom and top plates start out as solid blocks of aluminum which are precision machined to shape, with exact tolerances for a perfect fit. These parts are then anodized and the text and markings and are laser etched for a clean and enduring look.The SoundThe intention if the M1 is to provide a state of the art, Digital to Analog converter, utilizing the best designs and materials that can be found today. The D/A converter is a very critical part of the digital audio chain, after all you have to convert it to analog to hear it, and we feel this should be a true as possible in its reconstruction of the original signal. The sound of the M1 is intended to be transparent and revealing, and fully dynamic. This in part is made possible by the lowering the jitter to extremely low levels, providing a pure digital signal chain with no SRCs ( sample rate converters) or digital volume controllers, superior digital filter design, coupled to a fast transparent analog signal path with a discreet analog output section and plenty of good clean linear power for optimum analog performance.Many hours of listening were done to tune the M1 to an exacting sound, with all types of music, and with extensive testing done in the studio and in the home. We hope you find the M1 to be pleasing and enjoyable to hear and use in the home, or as a precision tool for high level reference monitoring for the professional.

Now with Remote II, and a ultra low jitter D/A with digital optical input "Avocet" is designed to solve the problems of accurate monitoring and volume control as required by workstation users, studios and mastering rooms alike. It is a stereo controller with three digital inputs, three analog inputs and a headphone system. It's comprised of a rack mounted unit and table top remote control. Avocet has many features including; dim, mute, phase, mono, and 16 bit truncation functions, plus a speaker select switch that sends line level balanced audio to one of three outputs. The six input sources have on the fly gain trim capability and all digital signals are up-sampled and jitter reduced to ensure highest accuracy during D/A conversion. The internal headphone amplifier can be fed from the program source or an external input. Provisions for a talk back function are included. Avocet can operate in surround up to 7.1, with the appropriate number of audio boxes in the system.

Lynx Studio Technology is proud to present the Hilo Reference A/D D/A Converter System. With the pristine, open, transparent audio quality for which Lynx is known, Hilo (pronounced HE-low) provides two channels of mastering quality analog to digital conversion, up to eight channels of digital to analog conversion, a secondary monitor output, and a world class independent headphone amplifier in a compact half-rack size. A first for the two-channel pro converter market, Hilo’s innovative 480 x 272 touchscreen provides a flexible and intuitive interface that can adapt to a particular application and be easily upgraded with enhancements and new features. Initial front panel controls support extensive signal routing and mixing, sample rate selection, clock source options, levels, metering and diagnostic features.Hilo completely redefines and evolves the category of the two channel converter. Of utmost importance is the audio signal quality. The completely new design of the analog stages and converter topology for Hilo break new ground in terms of lowering distortion and noise while maintaining transparency for A/D and D/A conversion. Beyond that, Hilo offers extensive I/O capabilities and utilizes the latest FPGA technology with vast resources for control, routing, and signal processing capabilities. Also in development are diagnostic and analysis tools for Hilo. The LCD screen is a natural interface for these functions.The digital or analog inputs can be routed to three separate outputs, Line Output (with 8 trim settings), Monitor Output, and Headphone Output. Each of these output pairs has its own dedicated DACs, allowing each to offer a unique mix. The Monitor and Headphone Outputs have volume controls, accessible via faders on the touchscreen or the single knob on the front (offering control in ½ dB increments). Another innovation, the Headphone section has its own dedicated D/A converter. This supports the creation of 32-channel headphone mixes independent of the main and monitor outputs, as well as providing specifications that rival those of dedicated headphone amps costing $1500 and more.The digital section offers a wide range of inputs. AES/EBU inputs and outputs have transformer isolated balanced XLR connectors. SPDIF input and output are available via transformer-coupled coax or optical (TOSLINK) connections. The Optical ports can also be used for up to eight ADAT channels. The ADAT input and output channels are completely independent from the AES/EBU or S/PDIF coax channels. The Lynx LT-USB LSlot accessory is also included, for computer connectivity. Lynx’s low jitter SynchroLock word clock is also included, with Word Clock in and out connections available.In total, Hilo has 12 total inputs, 16 total outputs plus 32 channels possible via its LSlot port. The unit’s FPGA powers its internal 32 channel mixer, which allows Hilo to offer the most versatile I/O and routing in the two channel converter genre. This is just the beginning of the innovation.In contrast to the concentrated and intricate back panel, Hilo’s front panel is elegant in its simplicity. It has a power switch, headphone jack, multipurpose control and a 480 x 272 pixel high resolution LCD touchscreen. This high-resolution screen does a lot more than simply replace the buttons on the front panel of most other converters. Of course it handles the basic settings and routing functions, clocking and level settings.A second meter screen shows just two larger bar-graph style stereo bar meters. Any input or output set can be assigned to each meter. In addition to bar-graph meters common on most converters, Hilo’s touchscreen is able to show more traditional metering types, such as old style VU meters. Also in development are diagnostic screens, such as real time analyzer, phase meter and loudness meter. As with all other Lynx products, Hilo is FPGA based, meaning new features, capabilities and graphics can be added at any time with a simple download.

HEDD, short for harmonically enhanced digital device, is a technological breakthrough in signal processing. HEDD is engineered to be musically transparent while providing the capability of generating tube/analog sounds in the digital domain. HEDD gives any user who works with digital the ability to sound less digital and more analog. Applications include: CD preparation, work station input and output, DAT machine A/D and D/A convertor replacement and effects generation (warming or changing sounds in the digital domain). HEDD 192 can be used in tracking, mixing or mastering. The HEDD signal processor has the following features: High Quality 24 Bit A/D and D/A Convertors 24 Bit Processing Adjustable Triode, Pentode and Tape sounds Digital I/O, AES and S/PDIF External WC Sync Input and Output Will be Upgradable to 192K sample rates (once parts are available) The front panel controls allow the user to select input source, sample rate, and continuously variable triode and pentode sounds. The HEDD can operate as an effects device or as separate A/D and D/A convertor with the sound enhancement process applied to either the A/D or D/A convertor. HEDD has transformerless balanced analog inputs and outputs, transformer isolated digital inputs and outputs, and uses separate power transformers and supplies for the analog and digital sections. The unit is 1 rack space tall and operates from 115V or 230V mains.

The ADC2 is the successor of our renowned two channel ADC1-MK2 A/D Converter. NEW: FIREWIRE option now available! The firewire option is a PCB which plugs into the main board of the ADC2. It supports bidirectional transmission: - analog or digital in from the ADC2 to the computer - from the computer to the ADC2, out on the S/PDIF connector on the back. All sampling rates are supported. There are drivers for Windows and PowerPC based MACs available. The ADC2 uses state of the art A/D chips in our proven ?correlation technique? configuration, which lowers converter imperfections. The analog input stages are kept balanced from the input connectors throughout to the converter chips. A high quality microphone preamplifier is built in as a standard feature. Supported sampling frequencies are 44.1, 48, 88.2, 96, 176.4 and 192 kHz. Output formats are AES/EBU in one or two wire technique, S/PDIF as well as Firewire for a direct connection to computers. Synchronization can be internal or external through AES/EBU or BNC (Wordclock). The built in digital peak limiter allows for setting a generous headroom on the analog inputs and still get a full scale signal at the converterΆs output. A large bar graph shows the level to the A/D input, the output level and the gain reduction in the aforementioned Limiter. The output wordlength can be reduced from 24 to 16 bits with the built in POW-R dithering. It is even possible to have one output running at 24 bits and another one at 16 bits. This feature comes handy when a safety copy to e.g. a DAT has to be made. The analog input sensitivity can be set in 1dB steps via a relais controlled attenuator. An additional gain control is implemented in the DSP chip in the digital domain. Both channel 1 and channel 2 are fully independent, except for the sampling rate and for the dither settings. The AES/EBU sync input can be used as a digital audio input. This allows to limit and / or dither digital audio signals. The peak hold feature can be used to monitor a transfer and check for overloads which may have occured.

The DAC1 is a stereo 24 bit / 96khz D/A converter designed with the aim of keeping an absolutely uncompromised audio signal path. Much detail and thought was spent on the digital input as well as the analogue output stage. Both have in common the purest possible approach in audio design, aspiring for nothing less than excellence. This is coupled with an ergonomic design that gives the user immediate access to all necessary functions, while keeping an uncluttered and thus easy-to-use front panel. This combination makes a truly professional D/A converter catering for the highest expectations. Inputs: There are three digital inputs on XLR connectors, and one on Toslink (optical). The accepted sampling frequencies are 44.1, 48, 88.2 and 96kHz. AES/EBU signals on a single connector are used. Each XLR input is actively routed to a corresponding XLR digital output, allowing monitoring at multiple stages in a digital studio setup.Synchronization:Several signal reclocking schemes are combined for extremely high jitter attenuation, making the DAC1 virtually immune to jitter over a very wide bandwidth.Converters:The correlation technique (using two converters per channel) which was already successfully employed in the ADC1 gives the DAC1 an edge over other D/A converters with equal wordlength and sampling rate specifications, resulting in improved SNR and THD. Outputs: The discrete Class A outputs have a virtually zero Ohm output impedance, but still can drive large loads without stability problems. Output levels can be set between -infinity and +27dBu. The outputs are symmetrical, but do not have any sound degrading servo mechanisms built in. For asymmetrical operation only one leg of the XLR connector (plus ground) is used. Remote: By hooking up an analog potentiometer or fader to the remote connector, the output level can be remote controlled. This level control happens in the digital domain. The input source selection can also be remote controlled.

New Manhattan DAC II features include:World&#39;s highest performance 130dB Sabre 9038 DAC chipset.32 bit integer Class 2 USB2 driverless audio interfaceWorld class transparent analog preamp attenuatorsRoon Ready optional network cardMQA ® hardware decoder Improved optional phono preamplifier card New, easy to navigate menu system     The Manhattan DAC II design uses the same chassis, same power supply, and front panel circuits as the original Manhattan. It uses a completely new, redesigned main board. This offers a substantial sound quality upgrade. Significantly better detail and resolution, and state of the art transparent analog preamplifier performance.Existing Manhattan DAC I owners are eligible for Manhattan DAC II upgrade.Original Manhattan owners are encouraged to upgrade to Manhattan DAC II for a very reasonable upgrade fee. Upgrade includes replacement of the motherboard and will be performed in the US by Mytek Brooklyn office, in Europe, by Mytek Warsaw office and overseas by authorized Mytek dealer.Femto Clock TechnologyMytek&#39;s new Femto Clock that&#39;s incorporated into our C777 Clocking architecture pushes jitter and the noise floor below measurable levels.Highest Resolution SupportModern high resolution audio formats support for PCM 32 bit 384 kHz DXD to Quad DSD256 11.2 MHz.Discrete Analog & Digital Power SuppliesTwo separate isolated power supplies for the analog and digital stages that lower noise and crosstalk while increasing power and consistency.SPECIFICATIONSCONVERSION: PCM up to 384k, 32bit, MQA ®, native DSD up to DSD256, DXD, 130dB Dynamic Range.MQA Hi-Res DECODER: built in certified hardware MQA ® decoderDIGITAL INPUTS: USB2 Class2 (OSX, Linux driverless, all formats), AES/EBU (PCM up to 384k, up to DSD128 DOP), 3x S/PDIF (PCM up to 192k, up to DSD128 DoP), Toslink, SDIF3 DSD up to DSD256ANALOG INPUTS: RCA Line In switchable to Phono with Optional Phono Card insterted, second pair of RCA Line In, third pair XLR Balanced Line In. Analog inputs are router through minimalpath state of the art analog attenuator directly to analog and headphone outputs.ANALOG OUTPUTS: RCA, balanced XLR, simultaneous, 50 Ohm impedanceHEADPHONE OUTPUTS: Reference High Current, High transient Headphone Amp, 500mA, 6 Watts, 0 Ohm out impedance. Dual headphone jacks, designed to drive demanding headphones. Balanced operation w/optional Mytek adapter.BUILT-IN ATTENUATOR: Choice of 1dB step analog attenuator for main out and headphones, 1dB step digital 32bit attenuator or purist relay bypass.CLOCK: “Mytek Femtoclock Generator (tm)” 0.82ps internal jitter, Wordclock Input and Output (allows stacking multiple units for multichannel operation, includes mch DSD)AUDIO RECORDING FUNCTION FOR DIGITAL SOURCES: All digital inputs can be routed into computer via USB2. Allows connection of external digital sources such as CD Players and digitizing ADCs.REMOTE: Included, universal remote capableFIRMWARE: Upgradable via USB Control Panel App (Win and Mac)OPTIONAL PRECISION PHONO ANALOG PREAMP CARDHigh End M/M, M/C Phono Preamplifier with custom nickel core step up transformer , relay switchable and tunable. Input impedances, transformer ratio, RIAA curves and choice of gain can be changed within the menu or using the remote via relay switches. Optional card is sold separately and is user installable.OPTIONAL "ROON READY" NETWORK CARD: Turns the Manhattan II into network streamer with 24/192k and DSD64 maximum throughput. Compatible w/ Roon, DLNA/UpnPPOWER SUPPLY: Switchable 115/230VAC (100V Japanese version available)DIMENSIONS: WxDxH=17"x10.5"x1.95"=432x267x50mmWEIGHT: 16lbs, 8kgWARRANTY: 2 years  

Whether you’re tracking, mixing or mastering, the Convert-8 will deliver powerful low-end, articulate mids and transcendent highs to every channel in your analog rig. Patched into one of our award-winning analog summing units like the 2-BUS+ or the D-BOX – or to your favorite analog console – the Convert-8 will empower you to create the spacious, three-dimensional soundscapes that only real analog summing can deliver.Compatible with all of today’s digital signals (including the ubiquitous ADAT format) the Convert-8 is ready to take on any mixing or monitoring job from standard stereo and 2.1 to 5.1 and the increasingly popular 7.1 surround format. Recognizing the needs of those who don’t need more analog inputs, the Convert-8 brings today’s very best digital-to-analog conversion within reach of any studio.Our design philosophy includes a strict demand that our equipment be elegant and easy to use, and the Convert-8 exemplifies that philosophy. No menus, no cryptic multi-finger combinations to remember – just clearly labeled single-function buttons.With industry-standard reference levels of -14, -16 and -18dBFS, you can recalibrate the Convert-8 with the push of a button. While many professional converters are only aligned at the factory, the Convert lets you move flexibly between different reference levels on the fly. Anyone who’s ever fumbled around behind a rack with a “tweeker tool” while a second person watches an external meter knows the special value of our front-panel calibration buttons, especially when there’s eight channels or more!Specifications:Signal to Noise Ratio A-weighted, 20Hz to 20KHz: < 114dBSignal to Noise Ratio unweighted, 20Hz to 20KHz: < 113dBDynamic Range A-weighted, 20Hz to 20KHz: < 114dBDynamic Range unweighted, 20Hz to 20KHz: < 113dBJitter: 16ps (100Hz to 40KHz), 18ps (100Hz to 1MHz)Crosstalk rejection: > 114dBu  1kHzReplacement Fuses: USA 2 amp slo-blow for 120V Europe 1 amp slo-blow for 240VTHD+N:THD+N, 1kHz, unweighted, 20Hz to 20kHz, +4dBu out: < 94.5dB (0.00188%)THD+N, 1kHz, unweighted, 20Hz to 20kHz, +22dBu out: < 106.5dB (0.00048%)Frequency Response  96KHz sample rate:DC to 20KHz: +0, -0.25dBDC to 30KHz: +0, -0.5dBDC to 40KHz: +0, -1.0dB