Cables and Plugs

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Oyaide d+ XLR Class B high quality cable, 2 x XLR 3-pin male to 2 x XLR 3-pin female. The flat cable design prevents signal loss caused by cable bends, 5m

Oyaide d+ XLR Class B high quality cable, 2 x XLR 3-pin male to 2 x XLR 3-pin female. The flat cable design prevents signal loss caused by cable bends, 3m

Oyaide d+ XLR Class B high quality cable, 2 x XLR 3-pin male to 2 x XLR 3-pin female. The flat cable design prevents signal loss caused by cable bends, 2m

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Balanced male jack to female XLRCable cross-section: 2 x 0.20 mm²With Neutrik (Rean) connectorsGold-plated contactsCasing: black metalHand-solderedLength: 3 m

Καλώδιο 2m balanced XLR male σε καρφί balanced.

Καλώδιο μικροφώνου 5m Mogami 2534 τερματισμένο με επίχρυσους connectors της Neutrik, από την ίδια την Mogami στην Ιαπωνία.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Grimm Audio TPR ‘Twisted Pair Reference’ cables are developed with physics in mind. Their design focuses on high RF immunity and low microphonics. The perfect symmetry of the cross-section and heavy shielding contribute to high RF immunity. Low microphonics is provided by a special interface layer under the shield and other construction details.

XLR male - to - XLR female -  10 meter

Καλώδιο Jack male stereo - σε - XLR male. 1.5 μέτρα.

Το ψηφιακό ομοαξονικό καλώδιο AudioQuest's Carbon είναι ένας πολύ έξυπνος τρόπος για να συνδέσετε τα ψηφιακά εργαλεία υψηλής απόδοσης. Μια καλή εφαρμογή είναι η σύνδεση μιας συσκευής αναπαραγωγής CD σε μετατροπέα ψηφιακού προς αναλογικό ή επεξεργαστή σήματος. Τα ψηφιακά ομοαξονικά καλώδια της AQ χρησιμοποιούν υλικά και τεχνικές κατασκευής που ελαχιστοποιούν την παραμόρφωση σε ένα εξαιρετικά μέγαλο εύρος ζώνης.  Το AQ Carbon βασίζεται σε έναν συμπαγή αγωγό για την εξάλειψη της παραμόρφωσης της αλληλεπίδρασης του νήματος και τη μείωση του jitter. Οι επιχρωμιωμένοι ασημένιοι αγωγοί είναι εξαιρετικοί για εφαρμογές πολύ υψηλής συχνότητας. Τα ψηφιακά ηχητικά σήματα εμπίπτουν σε αυτό το φάσμα υψηλών συχνοτήτων και ταξιδεύουν σχεδόν αποκλειστικά στην επιφάνεια του αγωγού.Δεδομένου ότι η επιφάνεια είναι κατασκευασμένη από ασήμι υψηλής καθαρότητας, η απόδοση του Carbon είναι πολύ κοντά σε εκείνη ενός συμπαγούς καλωδίου αργύρου, αλλά η τιμή του είναι πολύ πιο κοντά σε ένα στερεό χάλκινο καλώδιο.Τα καλώδια είναι μια κοινή διαδρομή για το ανεπιθύμητο θόρυβο που εισέρχεται στο σύστημά σας, αλλά το σύστημα πολλαπλών στρώσεων (NDS) του AudioQuest δημιουργεί ισχυρή άμυνα. Τα τυπικά συστήματα θωράκισης καλωδίων απορροφούν και στη συνέχεια απορροφούν θόρυβο και ενέργεια ραδιοσυχνοτήτων σε συνιστώσα εδάφους, η οποία διαμορφώνει και παραμορφώνει το κρίσιμο επίπεδο αναφοράς "αναφοράς".Η εφαρμογή της NDS σε συνθετικά με μέταλλα και άνθρακα "προστατεύει την ασπίδα", απορροφώντας και αντανακλώντας το μεγαλύτερο μέρος αυτής της ενέργειας προτού φτάσει στο στρώμα που είναι συνδεδεμένο με το έδαφος των εξαρτημάτων. Μια επάργυρη ασπίδα πλεξούδας και ένα πρόσθετο στρώμα φύλλου χαλκού μπλοκάρουν αποτελεσματικά τις ηλεκτρομαγνητικές παρεμβολές (EMI).Οι συνδέσεις RCA του Carbon είναι επενδυμένες με κρεμαστό ασήμι, μια πολύ παχιά και ασυνήθιστα καθαρή άμεση επένδυση που γίνεται με την βύθιση μεμονωμένων βυσμάτων σε καθαρό ασήμι, κάτι που αποτελεί μια ανώτερη προσέγγιση στην τυπική διαδικασία ηλεκτρολυτικής πλήρωσης παρτίδων βύσματος,Το AudioQuest χρησιμοποιεί εξαιρετικά καθαρό μοβ χαλκό για τα βύσματα βάσης, τα οποία είναι στερεωμένα με κρύα συγκόλληση - μια διαδικασία χωρίς συγκόλληση που χρησιμοποιεί πάστα υψηλής πίεσης και ασήμι για να ελαχιστοποιήσει την απώλεια σήματος. Αντιθέτως, η συγκόλληση τείνει να παρεμποδίζει το σήμα και η θέρμανση του αργύρου μπορεί να επηρεάσει αρνητικά την αγωγιμότητα του.   

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Pro Series - Studio & Live TRS Cable 20' (6.1 meters)

Pro Series - Studio & Live TRS Cable 510 (3.0 meters)

Pro Series - Studio & Live TRS Cable 5' (1.5 meters)

Pro Series - Studio & Live TRS Cable 3' (0.9 meters)

Pro Series - Studio & Live XLR Female to TRS Male 6' (1.8 meters)

Pro Series - Studio & Live XLR Female to TRS Male 3' (0.9 meters)

Pro Series - Studio & Live XLR Male to TRS Male 6' (1.8 meters)

Pro Series - Studio & Live XLR Male to TRS Male 3' (0.9 meters)

Pro Series - Studio & Live XLR Cable 50' (15.2 meters)

Pro Series - Studio & Live XLR Cable 25' (7.6 meters)

Pro Series - Studio & Live XLR Cable 20' (6.1 meters)

Pro Series - Studio & Live XLR Cable 15' (4.6 meters)

Pro Series - Studio & Live XLR Cable 10' (3.0 meters)

Pro Series - Studio & Live XLR Cable 6' (1.8 meters)

Pro Series - Studio & Live XLR Cable 3' (0.9 meters)

A precision triple-polished acrylic optical conductor reduces jitter to improve the quality of digital sound. DESIGN: Monofilament CONDUCTORS: Acrylic NOTE: Triple-polished ends, NTO (Toslink plugs); NMO (Toslink to 3.5mm plugs)

A precision triple-polished acrylic optical conductor reduces jitter to improve the quality of digital sound. DESIGN: Monofilament CONDUCTORS: Acrylic NOTE: Triple-polished ends, NTO (Toslink plugs); NMO (Toslink to 3.5mm plugs)

A precision triple-polished acrylic optical conductor reduces jitter to improve the quality of digital sound. DESIGN: Monofilament CONDUCTORS: Acrylic NOTE: Triple-polished ends, NTO (Toslink plugs); NMO (Toslink to 3.5mm plugs)

A precision triple-polished acrylic optical conductor reduces jitter to improve the quality of digital sound. DESIGN: Monofilament CONDUCTORS: Acrylic NOTE: Triple-polished ends, NTO (Toslink plugs); NMO (Toslink to 3.5mm plugs)

A precision triple-polished acrylic optical conductor reduces jitter to improve the quality of digital sound. DESIGN: Monofilament CONDUCTORS: Acrylic NOTE: Triple-polished ends, NTO (Toslink plugs); NMO (Toslink to 3.5mm plugs)

  Unique SINOX Flexi Plug DesignAllows both Cable and Plug to flex to required position Short design RCA plugs For maximum cable flexibillity in narrow space 24K Gold Plated Connectors Ensures plugs do not oxidise 99.96% High Purity OFC Copper Clearer Sound and purer signal transmission

The superior quality of Wireworld’s exclusive Gold-Tube™ RCA plugs and oxygen-free copper conductors produce real improvements in sound quality. BNC's are an optional termination.DESIGN: CoaxialSIGNAL CONDUCTORS: 24AWG | 0.2 sq. mmCONDUCTOR MATERIAL: Oxygen-Free CopperINSULATION: Gas Injected PEPLUG CONTACTS: Silver + gold platedIf you need custom termination, please specify in the shopping cart comment box what plugs you require at the beginning and at the end of the cable.

The superior quality of Wireworld’s exclusive Gold-Tube™ RCA plugs and oxygen-free copper conductors produce real improvements in sound quality. BNC's are an optional termination.DESIGN: CoaxialSIGNAL CONDUCTORS: 24AWG | 0.2 sq. mmCONDUCTOR MATERIAL: Oxygen-Free CopperINSULATION: Gas Injected PEPLUG CONTACTS: Silver + gold platedIf you need custom termination, please specify in the shopping cart comment box what plugs you require at the beginning and at the end of the cable.

The superior quality of Wireworld’s exclusive Gold-Tube™ RCA plugs and oxygen-free copper conductors produce real improvements in sound quality. BNC's are an optional termination.DESIGN: CoaxialSIGNAL CONDUCTORS: 24AWG | 0.2 sq. mmCONDUCTOR MATERIAL: Oxygen-Free CopperINSULATION: Gas Injected PEPLUG CONTACTS: Silver + gold platedIf you need custom termination, please specify in the shopping cart comment box what plugs you require at the beginning and at the end of the cable.

The superior quality of Wireworld’s exclusive Gold-Tube™ RCA plugs and oxygen-free copper conductors produce real improvements in sound quality. BNC's are an optional termination.DESIGN: CoaxialSIGNAL CONDUCTORS: 24AWG | 0.2 sq. mmCONDUCTOR MATERIAL: Oxygen-Free CopperINSULATION: Gas Injected PEPLUG CONTACTS: Silver + gold platedIf you need custom termination, please specify in the shopping cart comment box what plugs you require at the beginning and at the end of the cable.

The superior quality of Wireworld’s exclusive Gold-Tube™ RCA plugs and oxygen-free copper conductors produce real improvements in sound quality. BNC's are an optional termination.DESIGN: CoaxialSIGNAL CONDUCTORS: 24AWG | 0.2 sq. mmCONDUCTOR MATERIAL: Oxygen-Free CopperINSULATION: Gas Injected PEPLUG CONTACTS: Silver + gold platedIf you need custom termination, please specify in the shopping cart comment box what plugs you require at the beginning and at the end of the cable.