Turntable Cartridges

The Nagaoka MP-100 phonograph cartridge offers musical clarity and expression beyond its price and competitors splendid upward start toward long term musical enjoyment.Half-inch system with conical diamond on lightweight aluminum cantilver. The Nagaoka MP-100 phone cartridge offers musical clarity and expression beyond its price and competitors - a plendid upwards start toward long term musical enjoymentFeatures:Superfine polished conical diamond bonded stylusPowerfull samarium cobalt magnetLightweight aluminum alloy cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingSpecifications:Type: Moving magnetCantilever: Lightweight aluminum alloyStylus type: Conical diamond with .0006 inch radiusWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 5mVFrequency response: 20Hz-20kHzChannel balance  1kHz: > 2dBChannel separation: 1kHz: > 22dBRecommended loading: 47k ohmsDynamic compliance: 5.5 x 10-6 cm/dyneStatic compliance: 18 x 10-6 cm/dyneTracking force range: 1.5 - 2.3 g

The Audio Technica AT-MONO3/SP cartridge is special – redesigning not just the needle, but the whole cartridge specially for “shellac” or phonograph records. A high output moving coil cartridge of excellent production quality and wound with PCOCC coil for signal purity, it is designed to deliver excellent fidelity and superb clarity when playing 78 RPM mono records. With its high output of 1.2 mV, it can be used without additional pre-amplification or a MC transformer.Proven in use for many years in Japan, the Audio-Technica AT-MONO3/SP cartridge in now available in Europe and helps to bring back the pure joy of discovery and listening pleasure for 78 RPM record playing.Made specifically for mono recordings, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/SP also has an adapted vertical compliance.Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.The average usage time is 500 hours extending the life span of precious mono recordings.High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity.To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.​Specification:Type: Horizontal Mono Moving CoilMounting: 1/2" CentersFrequency Response: 22 - 22,000 HzBody Material: Aluminium/Synthetic ResinOutput Voltage: 1.2 mV (at 1 kHz, 12 cm/sec)Vertical Tracking Angle: 23°Vertical Tracking Force Range: 3.0 - 7.0 g (5.0 g standard)Stylus Shape: ConicalStylus Size: 2.5 milStylus Construction: Nude Square ShankCantilever: Aluminum PipeCoil Impedance: 40 ohms (1 kHz)Coil Inductance: 190 µm (1kHz)DC Resistance: 40 ohmsStatic Compliance: 10×10-6cm/dyneDynamic Compliance: 3.5×10-6cm/dyne (100Hz)Recommended Load Impedance: 400 - 47,000 ohmsWeight: 6.8g

Made specifically for mono recordings on vinyl records, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/LP also has an adapted vertical compliance.Carefully selected components and state of the art technology produce a high resolution cartridge.Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.The average usage time is 500 hours extending the life span of precious mono recordings.High purity PCOCC allows a more transparent signal transmission both high efficiency and high fidelity.To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.​Specification:Type: Horizontal Mono Moving CoilMounting: 1/2” centersFrequency Response: 20 - 20,000HzBody Material: Aluminium/Synthetic ResinOutput Voltage: 1.2 mV (at 1 kHz, 5.0 cm/sec)Vertical Tracking Angle: 23°Vertical Tracking Force Range: 1.5 to 2.5 g (standard 2.0 g)Stylus Shape: ConicalStylus Construction: 0.6 milCantilever: Aluminium PipeCoil Impedance: 40Ω (1kHz)Coil Inductance: 190 µH (1kHz)DC Resistance: 40ΩStatic Compliance: 20×10-6cm/dyneDynamic Compliance: 7×10-6cm/dyne (100Hz)Recommended Load Impedance: 400 to 47,000 ohmsWeight: 6.8g

Κινητού πηνίου(MC).Προδιαγραφές:  Output voltage at 1000 Hz, 5cm/sec.400 μVChannel balance at 1 kHz< 1 dBChannel separation at 1 kHz> 24 dBChannel separation at 15 kHz> 20 dBFrequency range at - 3dB20 - 55 kHzFrequency response 20 Hz - 20 kHz+1,5Tracking ability at 315Hz at recommended tracking force *)80 µmCompliance, dynamic, lateral12 µm/mNStylus typeNude Ortofon replicant,, conical aluminiumStylus tip radiusr/R 5/100 µmTracking force range2,2-2,7 g (22-27 mN)Tracking force, recommended2,5 g (25 mN)Tracking angle23°Internal impedance, DC resistance5 OhmRecommended load impedance50-200 OhmCartridge body materialStainless steel / AluminiumCartridge colourBronze/BlackCartridge weight10,7 gram 

Κινητού πηνίου(MC).Προδιαγραφές: Output voltage at 1 kHz 5 cm/sec450 μVChannel balance< 1,5 dBChannel separation at 1 kHz> 23 dBChannel separation at 15 kHz> 15 dBFrequency range at -3 dB20 Hz - 50 kHzFrequency response 20 Hz - 20 kHz-3Tracking ability at 315 Hz at recommended tracking force *)80 μmCompliance, dynamic, lateral12 μm/mNStylus typeNude fine line, Al. cantileverStylus tip radiusr/R 8/40Tracking force range2,2-2,7 g (22-27 mN)Tracking force recommended2,5 g (25 mN)Tracking angle20ºInternal impedance, DC resistance5 OhmRecommended load impedance50-500 OhmCartridge body materialStainless steel AluminiumCartridge colourRed/BlackCartridge weight10,7 g 

Κινητού πηνίου(MC).Προδιαγραφές:  Output voltage at 1 kHz 5 cm/sec500 μVChannel balance< 1,2 dBChannel separation at 1 kHz> 23 dBChannel separation at 15 kHz> 15 dBFrequency range at -3 dB20 Hz - 50 kHzFrequency response 20 Hz - 20 kHz-2Tracking ability at 315 Hz at recommended tracking force *)80 μmCompliance, dynamic, lateral12 μm/mNStylus typeNude FG 70, Ruby cantileverStylus tip radiusr/R 6/70Tracking force range2,2-2,7 g (22-27 mN)Tracking force recommended2,5 g (25 mN)Tracking angle20ºInternal impedance, DC resistance5 OhmRecommended load impedance50-200 OhmCartridge body materialStainless steel AluminiumCartridge colourBlue/BlackCartridge weight10,7 g 

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.5 mVChannel balance at 1 kHz1 dBChannel separation at 1 kHz26 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-29.000 HzFrequency response20-20.000 + 2 / - 0 dBTracking ability at 315Hz at recommended tracking force80 µmCompliance, dynamic, lateral22 µm/mNStylus typeNude Fine LineStylus tip radiusr/R 8/40 µmTracking force range1,4-1,7g (14-17 mN)Tracking force, recommended1,5 g (15 mN)Tracking angle20°Internal impedance, DC resistance1,2 kOhmInternal inductance630 mHRecommended load resistance47 kOhmRecommended load capacitance150-300 pFCartridge colour, body/stylusBlack/BronzeCartridge weight 7,2 g 

The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear.Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever.  Accurately traces the grooves of your records for smooth sound throughout the frequency range.Features:Universal mountBiradial diamond tipTubular aluminum alloy stylus cantileverStandard mount adapterMounting hardwareStylus guardLow Tracking ForceMinimizes wear on your irreplaceable vinyl collection

The Ortofon Exclusives Series of highest performing Moving Coil cartridges has now been expanded to include a new premier model – the MC Verismo. The Ortofon Exclusives series cartridges are widely acknowledged as being some of the best Moving Coil cartridges on the market, and we are continuously working on expanding the Exclusives range to offer music lovers even more opportunities to experience the supreme quality, precision, impact and dynamics that a highend reference cartridge conveys.The MC Verismo has been developed based on our extensive knowledge of vibration properties, different shapes and materials characteristics, as well as competences in magnetism, mechanical design and technologies. This new state-of-the-art product, representative of numerous Ortofon design ideals, is truly exemplary of the highest degree of performance possible in contemporary analogue playback technology. The MC Verismo will undoubtedly provide sound which simply has to be experienced.Design elements and high-end materialsThe housing of the Verismo cartridge is made in Titanium with the Selective Laser Melting (SLM) technique pioneered by Ortofon. This technique allows for precise control of the density of the body material, allowing for extremely high internal damping.The MC Verismo makes use of Ortofon’s Replicant 100 diamond. This Line Contact type stylus distinguishes itself by having a narrow and long contact surface, which is as close as possible to the original cutting stylus. This ensures the most accurate reproduction, lowest distortion and extended frequency range.The addition of a solid Diamond cantilever provides the best possible interface between the stylus and armature, owing to its hardness and crystal structure. The improvements found in the use of a Diamond cantilever have redefined the boundaries of analogue reproduction, presenting greater inner detail, subtlety, and depth like never before.Performance with a range of compatibilityIn the MC Verismo the cartridge’s contact with the tonearm takes place through three well-defined contact points placed on the top side of the cartridge. This means that the mechanical integration of the cartridge and the tonearm arm is always absolutely perfect and will result in a significant and breathtaking increase in dynamics, resolution, and richness in detail.With optimized weight and moderate compliance to suit the majority of modern tonearms, the MC Verismo is easily compatible with an endless array of contemporary high-end turntable equipment.