Turntables

A turntable set-up does not need to be complicated like rocket-science, our VTE turntable proves that. This good sounding belt-driven deck offers 2 versions for left– and right-handed users.The VTE turntable can be positioned on a table or mounted on a wall. The fastest installation process is made possible, because it comes pre-adjusted out of the box. No further set-up is needed. Tracking force and anti-skating are carefully set.Features:Vertical standing or wall mount option included  Choose “R” (right-handed) or “L” (left-handed) version  Instant playback with super-easy setup  Record clamp for secure record fixing  Belt drive with silicone belt  Low vibration synchronous motor & DC power supply  8,6” aluminium tonearm  Ortofon OM5e cartridge, pre-mounted  Pre-adjusted tracking force & anti-skating force  Special mechanism for perfect tracking in vertical position  Pre-mounted gold-plated RCA interconnect cable  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,8% 45: 0,7%Wow & flutter: 33: 0,29% 45: 0,27%Signal to noise: - 65dBPlatter: 300mm MDF with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included)Tracking force range: 0 - 25mN (OM5 18mN pre-adjusted)Included accessory: power supply, record clampPower consumption: 4,5 wattsDimensions (standing on table): 430 x 345 x 245mm (WxHxD)Dimensions (mounted on wall): 430 x 310 x 130mm (WxHxD)Weight: 2,8 kg net 

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board.  Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface.  Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data.  Χαρακτηριστικά:Belt drive with silicone belt  Low vibration synchronous motor  Integrated motor control with DC power supply secures silent running  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge, pre-mounted  Pre-mounted gold-plated RCA interconnect cable  Built-in MM phono stage  Connections: line-level RCA to amp & USB to PC/Mac (simultaneously)  Special turntable feet for effective decoupling  Colour options: Black, Red, White   

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board.  Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface.  Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data.  Χαρακτηριστικά:Belt drive with silicone belt  Low vibration synchronous motor  Integrated motor control with DC power supply secures silent running  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge, pre-mounted  Pre-mounted gold-plated RCA interconnect cable  Built-in MM phono stage  Connections: line-level RCA to amp & USB to PC/Mac (simultaneously)  Special turntable feet for effective decoupling  Colour options: Black, Red, White   

A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from laminated particle board. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction. The main chassis is made from lightweight, but very stiff particle board.  Essential II Phono USB utilises a straight 8,6“ aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play“ solution, than it‘s predecessor. Special feet effectively decouples the turntable from the surface.  Because Essential II Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection to both line-level input of your hifi system and PC/Mac easily can be used simultaneously! Open-Source recording software Audacity® is not based on a specific platform, is available for free and the perfect solution for recording and processing of your audio data.  Χαρακτηριστικά:Belt drive with silicone belt  Low vibration synchronous motor  Integrated motor control with DC power supply secures silent running  Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge, pre-mounted  Pre-mounted gold-plated RCA interconnect cable  Built-in MM phono stage  Connections: line-level RCA to amp & USB to PC/Mac (simultaneously)  Special turntable feet for effective decoupling  Colour options: Black, Red, White   

Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems. The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in white.Features:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio  Perfect solution if only a digital input is available  Easy set-up  Belt drive with silicone belt and low vibration motor  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge pre-mounted  Built-in phono pre-amplifier with analogue & digital out  Gold-plated RCA interconnect cable included  Special turntable feet for effective decoupling  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included) 

Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems. The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in black.Features:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio  Perfect solution if only a digital input is available  Easy set-up  Belt drive with silicone belt and low vibration motor  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge pre-mounted  Built-in phono pre-amplifier with analogue & digital out  Gold-plated RCA interconnect cable included  Special turntable feet for effective decoupling  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included) 

Many new audio systems, like home cinema receivers, soundbars, multiroom audio, TVs and Bluetooth speakers only offer digital optic input connections: So up to now vinyl lovers using such systems had no chance to play their records on those systems. The perfect solution is: Essential II DIGITAL An unique belt-drive turntable with built-in MM pre-amplifier that features digital optic as well as analogue amplifier connection options. Delivered with acrylic lid and in red.Features:Ideal for connection to multiroom systems (SONOS, HEOS etc) or TVs, soundbars and portable audio  Perfect solution if only a digital input is available  Easy set-up  Belt drive with silicone belt and low vibration motor  8,6” aluminium tonearm with sapphire bearings  Ortofon OM5e cartridge pre-mounted  Built-in phono pre-amplifier with analogue & digital out  Gold-plated RCA interconnect cable included  Special turntable feet for effective decoupling  Specifications:Speed: 33, 45 (manual speed change)Principle: belt driveSpeed variance: 33: 0,80% 45: 0,70%Wow & flutter: 33: 0,29% 45: 0,27%Platter: 300mm particle board with felt mat (0,8kg)Main bearing: stainless steelEffective arm length: 218,5 mmOverhang: 22,0mmEffective tonearm mass: 8,0grCounterweight for mass: 3 - 5,5g (included) 

NAD C 556 Transcription Turntable/Cartridge ComboVinyl Rules!Many of the world’s most ardent music lovers believe that the 33 1/3 RPM Long Playing vinyl record remains the most musically communicative playback medium. NAD has a long history of producing some of the best value-for-money turntables and phono stages. The PP 2i is a legendary budget phono preamp, while the PP 3i takes the superb performance of the PP 2i and adds a simple way to convert your LPs into CDs using your computer and the internet to automate the ‘CD mastering’ process.While vinyl LPs can be a reference quality source of musical enjoyment, they can also sound terrible if the turntable is less than reference quality. Unlike digital sources with their foolproof error correction circuits, the turntable is like a live performance with no room for error. The same piece of vinyl can sound lush, vibrant and spacious on one turntable, but edgy, lifeless and riddled with ticks and pops on another. The difference is the mechanical precision of every aspect of the turntable.Why Does It Sound So Good?When it comes to the C 556, NAD has spent lavishly on the parts of the turntable that define its performance, and has left off the features that do nothing to improve the sound. The result is a turntable that easily outperforms others at twice the modest asking price of the C 556. The secret to a good sounding turntable is to make a rock solid mechanical connection between the platter and the pickup stylus.Any play or vibration will either add resonant colouration (making the smack of a snare drum sound like a thud) or subtract the fine detail that is the primary benefit of well-played vinyl. To achieve this goal we use special materials and techniques. The three mechanisms that make up a turntable are the platter that supports and spins the record; the tone arm, which allows the stylus to accurately track the record; and the cartridge, which transforms the vibrations in the record groove into the electrical signals that are sent to your preamplifier.The platter of the C 556 uses a special phenolic resin that is pressure cast to create the ideal properties of being both massive and inert. The mass creates a flywheel effect that eliminates small, and very unmusical, speed variations called wow and flutter. The mass also rejects unwanted external vibrations, and combined with the extreme hardness of the phenolic material, suppresses vibrations in the audible range. This massive platter requires a precision low friction bearing to allow smooth and stable revolving motion.A special bronze body with a stainless steel ball bearing provides a point-perfect contact with the hardened steel shaft of the platter assembly. This is the ideal design for minimal friction, and a complete elimination of any play or ‘wobble’. The bearing is firmly connected to the rigid and well-damped base that provides a rigid connection to the tone arm. A precision synchronous clock motor keeps the platter spinning at exactly 33 1/3 RPM and its own vibrations are carefully isolated from the platter by a synthetic rubber belt and from the base by rubber isolation mountings.The tone arm must have the lowest possible mass while still maintaining a rigid, vibration-free connection to the record. To achieve this contradictory goal, the C 556 uses a hand built arm featuring an alloy tube and precision bearings at the gimbal pivot. A simple counter weight balance is combined with a magnetic anti-skate bias control to make for a friction-free pivot that allows the cartridge to operate in an ideal environment.Easy to EnjoyBy delivering the turntable with the cartridge already correctly installed and aligned, we were thinking of the many new vinyl devotees who may be less familiar with the setup requirements of a transcription turntable. Setup and operation could not be simpler—the C 556 comes complete. Just set the tone arm counter weight to the indicated position, then plug ‘n play.Whether you are new to vinyl, simply want to upgrade the sound of your vinyl collection, or even want to transcribe your LPs to digital files for playback on your computer, the NAD C 556 is the perfect choice. It is fully capable of providing the ‘vinyl magic’ that has made the LP the most successful recorded medium of all time. With the C 556, NAD is offering the best performing turntable in its 40-year history.Specifications:pressure-cast phenolic resin platter with felt mat provides excellent speed stability and protects records from scratchesprecision bronze and stainless steel ball bearing for smooth, quiet platter rotationhand-built aluminum alloy tonearm with precision gimbal pivot bearingsincludes pre-mounted Ortofon OM-5E moving magnet cartridgemagnetic anti-skate bias controlthree anti-vibration feethigh-torque synchronous-clock motor decoupled from base for reduced vibration transmission and better soundmanual operation with tonearm lift33-1/3 and 45 rpm speedsfrequency range (with included cartridge): 20-20,000 Hz (±2dB)channel separation (with included cartridge): 22dB at 1kHzattached 41" RCA audio cableweight: 8.8 lbs.17-7/16"W x 4-1/2"H (with dust cover down) x 14-1/4"D 

Luxuriously furnished, fully automatic turntable of high standard with three speeds (33, 45, 78 rpm). A solid heavy wooden console and a heavy platter in sandwich construction delivers outstanding absorbance of vibration and speed accuracy.Tone arm technology:Cardan tone arm with mass tracking force set by a high-precision torsion spring. Detachable, Torsional rigid carbon fiber headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating.Chassis technology:Solid wooden chassis, floating sub chassis, heavy sandwich platter with additional damping mass ring for the highest fidelity sound.Drive technology:Belt drive with polished flat belt.  DC motor with electric speed control. Viscosity-damped arm lift. Automatic tone arm top-mounted device. Auto Stop with tone arm return. Playback option for archive records at 78 rpm. Supplied with magnetic OMB 10 cartridge.Specifications:Speed r/min.: 33/45/78Speed a ccuracy in%:  DIN / WRMS: 0,07 / 0,04%Rumble-to-noise ratio: 48 dBRumble-noise ratio: 72 dBCartridge system: OMB 10Frequency Response: 10 Hz - 22kHzDimensions (WxHxD): 440 x 119 x 360 mmWeight: 8,2 kgColour:  walnut-silverPower supply: 12 V DC, 150 mA

Luxuriously furnished, fully automatic turntable of high standard with three speeds (33, 45, 78 rpm). A solid heavy wooden console and a heavy platter in sandwich construction delivers outstanding absorbance of vibration and speed accuracy.Tone arm technology:Cardan tone arm with mass tracking force set by a high-precision torsion spring. Detachable, Torsional rigid carbon fiber headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating.Chassis technology:Solid wooden chassis, floating sub chassis, heavy sandwich platter with additional damping mass ring for the highest fidelity sound.Drive technology:Belt drive with polished flat belt.  DC motor with electric speed control. Viscosity-damped arm lift. Automatic tone arm top-mounted device. Auto Stop with tone arm return. Playback option for archive records at 78 rpm. Supplied with magnetic OMB 10 cartridge.Specifications:Speed r/min.: 33/45/78Speed a ccuracy in%:  DIN / WRMS: 0,07 / 0,04%Rumble-to-noise ratio: 48 dBRumble-noise ratio: 72 dBCartridge system: OMB 10Frequency Response: 10 Hz - 22kHzDimensions (WxHxD): 440 x 119 x 360 mmWeight: 8,2 kgColour: Walnut-SilverPower supply: 12 V DC, 150 mA

Luxuriously furnished, fully automatic turntable of high standard with three speeds (33, 45, 78 rpm). A solid heavy wooden console and a heavy platter in sandwich construction delivers outstanding absorbance of vibration and speed accuracy.Tone arm technology:Cardan tone arm with mass tracking force set by a high-precision torsion spring. Detachable, Torsional rigid carbon fiber headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating.Chassis technology:Solid wooden chassis, floating sub chassis, heavy sandwich platter with additional damping mass ring for the highest fidelity sound.Drive technology:Belt drive with polished flat belt.  DC motor with electric speed control. Viscosity-damped arm lift. Automatic tone arm top-mounted device. Auto Stop with tone arm return. Playback option for archive records at 78 rpm. Supplied with magnetic OMB 10 cartridge.Specifications:Speed r/min.: 33/45/78Speed a ccuracy in%:  DIN / WRMS: 0,07 / 0,04%Rumble-to-noise ratio: 48 dBRumble-noise ratio: 72 dBCartridge system: OMB 10Frequency Response: 10 Hz - 22kHzDimensions (WxHxD): 440 x 119 x 360 mmWeight: 8,2 kgColour: textured lacquer blackPower supply: 12 V DC, 150 mA

High quality, fully automatic turntable with three speeds (33, 45, 78 rpm). This turntable meets all the criteria. Sophisticated technology, greatest convenience combined with great sound leaves the listener with no unfulfilled wishes.Tone arm technology:Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber.Chassis technology:Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat.Drive technology:Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OMB 10 cartridge.Specifications:Speed r/min.: 33/45/78Speed a ccuracy in% DIN / WRMS: < -/+ 0,07 / 0,04 % DINRumble-to-noise ratio: 48 dBRumble-noise ratio: 72 dBCartridge system: OMB 10Frequency Response: 20 Hz - 22 kHzDepth sensing capability (300 Hz): 70 µm at 315 HzDimensions (WxHxD): 440 x 119 x 360 mmWeight: 5,43 kgColour: black / silverPower supply: 12V DC, 150 mA

With a machined armboard, dedicated external power supply, Linn tonearm, and a moving coil cartridge, this turntable delivers stunning performance and musicality at a price level between Klimax and Majik.The complete Akurate LP12 turntable comprises:Sondek LP12 turntableKore sub-chassis and armboardLingo power supply and motor control unit for the AC motorAkito tonearmKlyde moving coil cartridgeThe Akurate LP12 is available with a choice of solid wood plinths: Black Ash, Cherry, Oak, Rosenut and Walnut. Linn Akurate LP12 Turntable SpecificationsSpeed Accuracy: 0.03%Platter Tolerance: 1/1,000th inchDimensions (WxHxD): 5.5 x 17.5 inches x 14 inchesWeight: 22 lbs

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble.The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ cc Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge.A TPE-damped counterweight eliminates unwanted resonances. All ingredients add up to a miracle in sound for the price. Its ultra-stylish look is available in 3 exclusive high-gloss finish versions.  Features:Precision belt drive principle using synchronous motor  Ultra-precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Acoustical inert acrylic platter  9” cc EVO tonearm made from carbon  Counterweight with TPE damping  Adjustable aluminium tip-toe feet  Available with or without Ortofon Quintet red cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm acrylicMains bearing: stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,12% I 45: +/- 0,10%Speed drift: 33: +/- 0,17% I 45: +/- 0,08%Signal to noise    - 73dBTonearm    9” cc EVO carbonEffective arm length: 230 mmEffective arm mass: 8 gOverhang: 18mmTracking force: 0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption:5 watt max / < 0,3 watt standbyDimensions: 430 x 150 x 323 mm (WxHxD)Weight: 8,0 kg net

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

The latest edition to the RPM range of turntables follows on from where the hugely popular Genie 3 left off. Utilising a range of innovative improvements over its predecessor, the RPM-1 Carbon stands out from the crowd with its stunning design, impeccable sound and affordable price.The new RPM-1 Carbon design has been upgraded to significantly reduce resonance across the turntable. While maintaining the instantly recognisable shape, this turntable boasts improvements in the tonearm, bearing, and motor.The brand new tonearm is a carbon fibre/aluminium resin construct, made using special heat and pressure treatments. The result of this new design is a tonearm that is more solid and anti-resonant than ever before at this price, while maintaining a light weight. The arm is finished off with a pre-fitted Ortofon 2m Red cartridge and a new magnetic anti-skate mechanism. The improved counterweight also utilises TPE damping in the form of an anti-resonant ring around the fixing point.The completely decoupled motor is based upon the same design as the Xpression Carbon, powered by an AC generator that's connected to the new  DC power supply. The inverted main bearing now utilises a ceramic ball, offering a more fluid and consistent platter rotation than ever before.Features:With Ortofon 2M RedPrecision belt drive using synchronous motorUltra-precision DC-driven AC generator motor powerInverted platter bearing with ceramic ballPlatter made from MDF using felt mat8,6” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatmentsMagnetic anti-skatingCounterweight with TPE dampingPre-fitted Ortofon 2M Red cartridge3 high-gloss colours (black, red, white)Lid available as optional extraSpecifications:Speed : 33, 45 (manual speed change)Drive principle : belt drivePlatter : 300mm MDFMains bearing : stainless steel axle with ceramic ballWow & flutter : 33: +/- 0,14% I 45: +/- 0,13%Speed drift : 33: +/- 0,27% I 45: +/- 0,19%Signal to noise : - 71dBTonearm : 8,6” carbon; aluminium and resinEffective arm length : 218,5 mmEffective arm mass : 13,5 gOverhang : 22mmTracking force : 0 - 25mNIncluded accessories : 15 volts DC / 500 mA power supplyPower connection : 110/240 Volt - 50 or 60 HzPower consumption : 5 watt max / < 0,5 watt standbyDimensions : 380 x 110 x 350mm (WxHxD)Weight : 3,8 kg net

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.  The new DEBUT Carbon DC has been designed to set new standards in this category for the coming decade – perfectly timed as analogue today is again a respected source, while the demand for good turntables is growing again!  The most obvious improvement is the inclusion of a CARBON TUBE for the tonearm, which increases stiffness and decreases unwanted resonance.  This material normally is extensively used in high-end tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design offers low noise AC motor with effective motor decoupling (utilising TPE-damping) and ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability without unwanted vibration.  The DEBUT CARBON DC will be offered in high-gloss black or shiny red, green, blue, yellow, silver or white as no-added-cost option. Specifications: 8,6” carbon tonearm   Increased platter size with more weight   Precision belt drive with synchronous motor   New DC power supply with ultra precision frequency DC-driven AC generator (like Speed Box) for ultimate speed stability.   New TPE motor suspension   Felt mat   magnetic cartridge options from Ortofon OM 10 or 2M red   7 high-gloss colours

The DP-300F has been designed with heavier base construction for reduced vibration and improved performance. The all new tonearm has a removable headshell making cartridge replacement simple.  The standard mount headshell allows for any standard mount cartridge between 5 ~ 10 grams to be mounted and balanced.  The automatic startup feature allows the turntable to begin play with the touch of a button, and once play has been completed, the tonearm will be returned to the armrest gently so that the stylus and record are not damaged or scratched.  The turntable is made of rigid diecast aluminum to produce uniform rotation for smooth flutter free operation.  There is also a manual lifter mechanism that allows you to place the needle on the record wherever you want, so you can skip to a different song in the middle of a side. The DP-300F includes a built-in phono equalizer to connect the player to an integrated amp or receiver that does not have its own phono input. This turntable is powered by a DC servo motor and belt drive system and has rotation speeds of 33 1/3 or 45 rpm.  It comes with a MM cartridge so that you can begin to enjoy your analog record collection as soon as you connect the DP-300F to your home hi-fi system.

The DP-300F has been designed with heavier base construction for reduced vibration and improved performance. The all new tonearm has a removable headshell making cartridge replacement simple.  The standard mount headshell allows for any standard mount cartridge between 5 ~ 10 grams to be mounted and balanced.  The automatic startup feature allows the turntable to begin play with the touch of a button, and once play has been completed, the tonearm will be returned to the armrest gently so that the stylus and record are not damaged or scratched.  The turntable is made of rigid diecast aluminum to produce uniform rotation for smooth flutter free operation.  There is also a manual lifter mechanism that allows you to place the needle on the record wherever you want, so you can skip to a different song in the middle of a side. The DP-300F includes a built-in phono equalizer to connect the player to an integrated amp or receiver that does not have its own phono input. This turntable is powered by a DC servo motor and belt drive system and has rotation speeds of 33 1/3 or 45 rpm.  It comes with a MM cartridge so that you can begin to enjoy your analog record collection as soon as you connect the DP-300F to your home hi-fi system.

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.  Belt drive system with low vibration DC motor   Central gravity mass point made from artificial stone   Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom   Low resonance MDF platter with felt mat   8,6” ultra low mass tonearm with straight arm tube   Pre-adjusted tracking force & antiskating   Gold-plated RCA contacts & cartridge pins   Colour options: red-black, white-black, silver-black  Specifications:speed : 33, 45 (manual speed change)Speed variance: 33: 0,2% 45: 0,18%Wow & flutter: 33: 0,14% 45: 0,13%platter: 300mm MDFtonearm: 8,6” metal tubeeffective arm length: 218,5 mmoverhang: 22,0 mmeffective tonearmmass: 8,0grcounterweight for cartridge mass: 3 - 5,5g (included)tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)output: RCA to phono inputincluded accessory: RCA cable, 15V DC power supplypower consumption: 4,0 wattsdimensions: 430 x 90 x 300mm (WxHxD)weight: 2,7 kg net

Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.  The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.  Belt drive system with low vibration DC motor   Central gravity mass point made from artificial stone   Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom   Low resonance MDF platter with felt mat   8,6” ultra low mass tonearm with straight arm tube   Pre-adjusted tracking force & antiskating   Gold-plated RCA contacts & cartridge pins   Colour options: red-black, white-black, silver-black  Specifications:speed : 33, 45 (manual speed change)Speed variance: 33: 0,2% 45: 0,18%Wow & flutter: 33: 0,14% 45: 0,13%platter: 300mm MDFtonearm: 8,6” metal tubeeffective arm length: 218,5 mmoverhang: 22,0 mmeffective tonearmmass: 8,0grcounterweight for cartridge mass: 3 - 5,5g (included)tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)output: RCA to phono inputincluded accessory: RCA cable, 15V DC power supplypower consumption: 4,0 wattsdimensions: 430 x 90 x 300mm (WxHxD)weight: 2,7 kg net

RPM 3 Carbon utilises evolutionary enhancements to improve the performance of RPM series: A low resonance chassis holds an inverted platter bearing with ceramic ball for further reduced rumble. An outboard 15V AC motor is smoothly driven using an ultra precision AC generator with DC power supply for further enhanced speed stability.  A 10“ S-shaped tonearm tube is made from carbon fibre, aluminium and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strenghtened, internal damping is maximized and resonances are reduced to a minimum. This makes the tonearm also suitable for MC cartridges.Additional features are a magnetic antiskating mechanism and a TPE-damped counterweight. All ingredients add up to a miracle in sound for the price and ultra-stylish look!  Features:Precision belt drive using free-standing synchronous motor  Central mass point optimizes vibrancy behaviour  Ultra precision DC-driven AC generator motor power  Inverted platter bearing with ceramic ball  Platter made from MDF using vinyl mat  10” S-shaped tonearm made from carbon, aluminium, resin utilising special heat and pressure treatments  Magnetic antiskating  Counterweight with TPE damping  Available with or without Ortofon 2M Silver cartridge  3 high-gloss colours (black, red, white)  Lid available as an option  ​Specifications:Speed: 33, 45 (manual speed change)Drive principle    belt drivePlatter: 300mm MDFMains bearing:    stainless steel axle with ceramic ballWow & flutter: 33: +/- 0,14% I 45: +/- 0,11%Speed drift: 33: +/- 0,19% I 45: +/- 0,08%Signal to noise    - 71dBTonearm    10” carbon, aluminium and resinEffective arm length: 254 mmEffective arm mass: 16 gOverhang: 16mmTracking force:    0 - 25mNPower supply: 15 volts DC / 800 mA power supply110/240 Volt - 50 or 60 HzPower consumption: 5 watt max / < 0,5 watt standbyDimensions: 422 x 118 x 373mm (WxHxD)Weight: 5,5 kg net​

This special collaboration between Pro-Ject Audio Systems and the Universal Music Group features one of the most influencing artists of all time The Beatles!The turntable used is one of the most sold audiophile turntables in the world: Debut Carbon Esprit SB!It features high quality and audiophile components, such as an Ortofon 2M Red cartridge, a precision aluminum pulley, an electronic speed control, top notch MDF chassis, an acrylic platter or a completely redesigned motor control.Its sound is both thrilling and relaxing, musical and detailed just like the music from The Beatles, therefore they are perfect partners in crime. The artwork shows copies of tickets from their legendary world tour in 1964.  This one of a kind masterpiece is limited to 2500 pieces worldwide.  Features:Special edition of Debut Carbon Esprit SB  Limited to 2500 pieces worldwide!  Non-resonant acrylic platter  Belt drive with synchronous motor and silicone belt  33/45 & 78*rpm out of the box (* please use78 stylus)  Built-in precision Speed Box with switch on upper side  Chassis made of resonance in-sensitive MDF  Integrated DC-powered motor control minimizes motor vibration and guarantees speed stability  Low tolerance platter bearing with stainless steel spindle  8,6” carbon tonearm  Ortofon 2M red cartridge pre-mounted  High-quality semi-balanced Connect it E phono interconnect With gold-plated RCA connectors included  Special decoupling feet  Dust cover included  Specifications:Speed: 33, 45 / 78 (electronic/manual speed change)Drive principle: belt drivePlatter: 300mm acrylic platterMains bearing: stainless steelWow & flutter: +/- 0,10%Speed drift: +/- 0,80%Signal to noise: - 68dBEffective arm length: 218,5 mmEffective arm mass: 6,0 gOverhang: 18,5mmTracking force: 10 - 30mNIncluded accessories: 15 volts DC / 1,6A power supply, dust coverPower connection: 110/120 or 230/240 Volt - 50 or 60 Hzpower consumption: 7,4 watt max / < 0,5 watt standbyDimensions: 415 x 118 x 320mm (WxHxD) lid closedWeight: 5,6 kg net 

The Omega 100’s design is at once simple and elegant. Ultra-connected, it implements state-of-the-art technologies which reproduce the warm, vintage sound of vinyl, without constraints.Unique aesthetic qualitiesThe Elipson Omega 100 has been designed to offer a streamlined, enjoyable user experience. Its large sub-chassis integrates a variety of functions which are showcased by a band of chrome-plated or brushed metal. Its silhouette, finish, and meticulous construction are a tribute to sophisticated French design. Not a single screw is visible, the cover is made-to-measure and the angles are rounded for a more elegant appearance. The high-tech design creates a contrast with the nostalgia conjured up by the object itself, which makes this turntable a neo-vintage reference for the living room.An ultra-connected turntable Faithful to its principles, Elipson aims to endow this mythical object with new functions. After having found that the majority of people buying LPs were under 30, the brand built a turntable which can be easily connected to all the Bluetooth speakers on the market. The carefully selected, state-of-the-art electronics offer a number of possibilities:A premium phono preamp allowing the user to connect the turntable to any amplifier.Apt-X Bluetooth transmission for wireless connectivity and a wider range of placement options, letting the user enjoy the warm, analog sound of LPs with any portable speaker.A USB output to allow the user to make digital copies of his or her favorite records, which may then be brought anywhere. Optimized FunctionsEach of the Omega 100 turntable’s functions has been optimized. Its carbon tonearm, designed by the brand’s engineers, is equipped with a Ortofon OM10 cartridge. The suspended motor entirely eliminates friction, while the extraordinarily precise rotational speed generator enables playback for 33, 45 and 78 rpm records.The world’s only preamplified, Bluetooth turntable “Made in France” Designed and built in France, the Elipson turntable is a testament to exceptional craftsmanship. A team of passionate experts ensures that Elipson turntables are manufactured with the same amount of care and attention to detail, every day.  Specifications:Chassis: Lacquered PMMA Plate: Pressed steelTonearm: CarbonCartridge: OM 10Centralizer: AluminiumFrequency Response: (±3 dB)25Hz-20KHz (-3 dB/+1 dB)Preamp: Built-in high-end RIAA preampBluetooth: Class 2 : -6dBm ~ 4 dBm / 2.4G : 2.402 à 2.480GHzaptX: YesUSB: Opto-isolated USB output allowing vinyl recordingGain: MM : 40,5 dB / MC : 61 dBCrosstalkMM :88 dB / MC :78 dBTHDMM : 0,006 % / MC : 0,05 %Signal/noise ratio:MM : 82 dB / MC : 76 dBDimensions (W x H x D)450 x 120 x 380 mmWeight: 5,8kg